--- gforth/prim	2006/10/27 21:47:01	1.200
+++ gforth/prim	2007/03/31 21:43:18	1.210
@@ -1,6 +1,6 @@
 \ Gforth primitives
 
-\ Copyright (C) 1995,1996,1997,1998,2000,2003,2004,2005 Free Software Foundation, Inc.
+\ Copyright (C) 1995,1996,1997,1998,2000,2003,2004,2005,2006 Free Software Foundation, Inc.
 
 \ This file is part of Gforth.
 
@@ -248,6 +248,9 @@ SET_IP((Xt *)a_callee);
 
 execute	( xt -- )		core
 ""Perform the semantics represented by the execution token, @i{xt}.""
+#ifdef DEBUG
+fprintf(stderr, "execute %08x\n", xt);
+#endif
 #ifndef NO_IP
 ip=IP;
 #endif
@@ -849,23 +852,18 @@ DCell d = mmul(n1,n2);
 #else
 DCell d = (DCell)n1 * (DCell)n2;
 #endif
-#ifdef BUGGY_LL_DIV
-DCell r = fmdiv(d,n3);
-n4=DHI(r);
-n5=DLO(r);
-#else
-/* assumes that the processor uses either floored or symmetric division */
-DCell d5 = d/n3;
-n4 = d%n3;
-if (CHECK_DIVISION_SW && n3 == 0)
-  throw(BALL_DIVZERO);
+#ifdef ASM_SM_SLASH_REM
+ASM_SM_SLASH_REM(DLO(d), DHI(d), n3, n4, n5);
 if (FLOORED_DIV && ((DHI(d)^n3)<0) && n4!=0) {
-  d5--;
+  if (CHECK_DIVISION && n5 == CELL_MIN)
+    throw(BALL_RESULTRANGE);
+  n5--;
   n4+=n3;
 }
-n5 = d5;
-if (CHECK_DIVISION && d5 != n5)
-  throw(BALL_RESULTRANGE);
+#else
+DCell r = FLOORED_DIV ? fmdiv(d,n3) : smdiv(d,n3);
+n4=DHI(r);
+n5=DLO(r);
 #endif
 :
  >r m* r> fm/mod ;
@@ -877,19 +875,17 @@ DCell d = mmul(n1,n2);
 #else
 DCell d = (DCell)n1 * (DCell)n2;
 #endif
-#ifdef BUGGY_LL_DIV
-DCell r = fmdiv(d,n3);
-n4=DLO(r);
+#ifdef ASM_SM_SLASH_REM
+Cell remainder;
+ASM_SM_SLASH_REM(DLO(d), DHI(d), n3, remainder, n4);
+if (FLOORED_DIV && ((DHI(d)^n3)<0) && remainder!=0) {
+  if (CHECK_DIVISION && n4 == CELL_MIN)
+    throw(BALL_RESULTRANGE);
+  n4--;
+}
 #else
-/* assumes that the processor uses either floored or symmetric division */
-DCell d4 = d/n3;
-if (CHECK_DIVISION_SW && n3 == 0)
-  throw(BALL_DIVZERO);
-if (FLOORED_DIV && ((DHI(d)^n3)<0) && (d%n3)!=0)
-  d4--;
-n4 = d4;
-if (CHECK_DIVISION && d4 != n4)
-  throw(BALL_RESULTRANGE);
+DCell r = FLOORED_DIV ? fmdiv(d,n3) : smdiv(d,n3);
+n4=DLO(r);
 #endif
 :
  */mod nip ;
@@ -913,9 +909,8 @@ n2 = n1>>1;
 
 fm/mod	( d1 n1 -- n2 n3 )		core		f_m_slash_mod
 ""Floored division: @i{d1} = @i{n3}*@i{n1}+@i{n2}, @i{n1}>@i{n2}>=0 or 0>=@i{n2}>@i{n1}.""
-#ifdef BUGGY_LL_DIV
 #ifdef ASM_SM_SLASH_REM
-ASM_SM_SLASH_REM(d1.lo, d1.hi, n1, n2, n3);
+ASM_SM_SLASH_REM(DLO(d1), DHI(d1), n1, n2, n3);
 if (((DHI(d1)^n1)<0) && n2!=0) {
   if (CHECK_DIVISION && n3 == CELL_MIN)
     throw(BALL_RESULTRANGE);
@@ -927,31 +922,6 @@ DCell r = fmdiv(d1,n1);
 n2=DHI(r);
 n3=DLO(r);
 #endif /* !defined(ASM_SM_SLASH_REM) */
-#else
-#ifdef ASM_SM_SLASH_REM4
-ASM_SM_SLASH_REM4(d1, n1, n2, n3);
-if (((DHI(d1)^n1)<0) && n2!=0) {
-  if (CHECK_DIVISION && n3 == CELL_MIN)
-    throw(BALL_RESULTRANGE);
-  n3--;
-  n2+=n1;
-}
-#else /* !defined(ASM_SM_SLASH_REM4) */
-/* assumes that the processor uses either floored or symmetric division */
-DCell d3 = d1/n1;
-n2 = d1%n1;
-if (CHECK_DIVISION_SW && n1 == 0)
-  throw(BALL_DIVZERO);
-/* note that this 1%-3>0 is optimized by the compiler */
-if (1%-3>0 && ((DHI(d1)^n1)<0) && n2!=0) {
-  d3--;
-  n2+=n1;
-}
-n3 = d3;
-if (CHECK_DIVISION && d3 != n3)
-  throw(BALL_RESULTRANGE);
-#endif /* !defined(ASM_SM_SLASH_REM4) */
-#endif
 :
  dup >r dup 0< IF  negate >r dnegate r>  THEN
  over       0< IF  tuck + swap  THEN
@@ -960,33 +930,13 @@ if (CHECK_DIVISION && d3 != n3)
 
 sm/rem	( d1 n1 -- n2 n3 )		core		s_m_slash_rem
 ""Symmetric division: @i{d1} = @i{n3}*@i{n1}+@i{n2}, sign(@i{n2})=sign(@i{d1}) or 0.""
-#ifdef BUGGY_LL_DIV
 #ifdef ASM_SM_SLASH_REM
-ASM_SM_SLASH_REM(d1.lo, d1.hi, n1, n2, n3);
+ASM_SM_SLASH_REM(DLO(d1), DHI(d1), n1, n2, n3);
 #else /* !defined(ASM_SM_SLASH_REM) */
 DCell r = smdiv(d1,n1);
 n2=DHI(r);
 n3=DLO(r);
 #endif /* !defined(ASM_SM_SLASH_REM) */
-#else
-#ifdef ASM_SM_SLASH_REM4
-ASM_SM_SLASH_REM4(d1, n1, n2, n3);
-#else /* !defined(ASM_SM_SLASH_REM4) */
-/* assumes that the processor uses either floored or symmetric division */
-DCell d3 = d1/n1;
-n2 = d1%n1;
-if (CHECK_DIVISION_SW && n1 == 0)
-  throw(BALL_DIVZERO);
-/* note that this 1%-3<0 is optimized by the compiler */
-if (1%-3<0 && ((DHI(d1)^n1)<0) && n2!=0) {
-  d3++;
-  n2-=n1;
-}
-n3 = d3;
-if (CHECK_DIVISION && d3 != n3)
-  throw(BALL_RESULTRANGE);
-#endif /* !defined(ASM_SM_SLASH_REM4) */
-#endif
 :
  over >r dup >r abs -rot
  dabs rot um/mod
@@ -1022,27 +972,13 @@ ud = (UDCell)u1 * (UDCell)u2;
 
 um/mod	( ud u1 -- u2 u3 )		core	u_m_slash_mod
 ""ud=u3*u1+u2, u1>u2>=0""
-#ifdef BUGGY_LL_DIV
 #ifdef ASM_UM_SLASH_MOD
-ASM_UM_SLASH_MOD(ud.lo, ud.hi, u1, u2, u3);
+ASM_UM_SLASH_MOD(DLO(ud), DHI(ud), u1, u2, u3);
 #else /* !defined(ASM_UM_SLASH_MOD) */
 UDCell r = umdiv(ud,u1);
 u2=DHI(r);
 u3=DLO(r);
 #endif /* !defined(ASM_UM_SLASH_MOD) */
-#else
-#ifdef ASM_UM_SLASH_MOD4
-ASM_UM_SLASH_MOD4(ud, u1, u2, u3);
-#else /* !defined(ASM_UM_SLASH_MOD4) */
-UDCell ud3 = ud/u1;
-u2 = ud%u1;
-if (CHECK_DIVISION_SW && u1 == 0)
-  throw(BALL_DIVZERO);
-u3 = ud3;
-if (CHECK_DIVISION && ud3 != u3)
-  throw(BALL_RESULTRANGE);
-#endif /* !defined(ASM_UM_SLASH_MOD4) */
-#endif
 :
    0 swap [ 8 cells 1 + ] literal 0
    ?DO /modstep
@@ -1095,12 +1031,7 @@ d2 = -d1;
 
 d2*	( d1 -- d2 )		double		d_two_star
 ""Shift left by 1; also works on unsigned numbers""
-#ifdef BUGGY_LL_SHIFT
-DLO_IS(d2, DLO(d1)<<1);
-DHI_IS(d2, (DHI(d1)<<1) | (DLO(d1)>>(CELL_BITS-1)));
-#else
-d2 = 2*d1;
-#endif
+d2 = DLSHIFT(d1,1);
 :
  2dup d+ ;
 
@@ -1559,6 +1490,11 @@ for (; f83name1 != NULL; f83name1 = (str
       memcasecmp(c_addr, f83name1->name, u)== 0 /* or inline? */)
     break;
 f83name2=f83name1;
+#ifdef DEBUG
+fprintf(stderr, "F83find ");
+fwrite(c_addr, u, 1, stderr);
+fprintf(stderr, " found %08x\n", f83name2); 
+#endif
 :
     BEGIN  dup WHILE  (find-samelen)  dup  WHILE
 	>r 2dup r@ cell+ char+ capscomp  0=
@@ -1714,8 +1650,6 @@ f = key_query((FILE*)wfileid);
 f = key_query(stdin);
 #endif
 
-\+os
-
 stdin	( -- wfileid )	gforth
 ""The standard input file of the Gforth process.""
 wfileid = (Cell)stdin;
@@ -1728,9 +1662,16 @@ stderr	( -- wfileid )	gforth
 ""The standard error output file of the Gforth process.""
 wfileid = (Cell)stderr;
 
+\+os
+
 form	( -- urows ucols )	gforth
-""The number of lines and columns in the terminal. These numbers may change
-with the window size.""
+""The number of lines and columns in the terminal. These numbers may
+change with the window size.  Note that it depends on the OS whether
+this reflects the actual size and changes with the window size
+(currently only on Unix-like OSs).  On other OSs you just get a
+default, and can tell Gforth the terminal size by setting the
+environment variables @code{COLUMNS} and @code{LINES} before starting
+Gforth.""
 /* we could block SIGWINCH here to get a consistent size, but I don't
  think this is necessary or always beneficial */
 urows=rows;
@@ -2833,10 +2774,11 @@ define(`uploop',
 define(`_uploop',
        `ifelse($1, `$3', `$5',
 	       `$4`'define(`$1', incr($1))_uploop(`$1', `$2', `$3', `$4', `$5')')')
+
 \ argflist(argnum): Forth argument list
 define(argflist,
        `ifelse($1, 0, `',
-               `uploop(`_i', 1, $1, `format(`u%d ', _i)', `format(`u%d ', _i)')')')
+               `uploop(`_i', 1, $1, ``u''`_i ', ``u''`_i')')')
 \ argdlist(argnum): declare C's arguments
 define(argdlist,
        `ifelse($1, 0, `',
@@ -2844,15 +2786,15 @@ define(argdlist,
 \ argclist(argnum): pass C's arguments
 define(argclist,
        `ifelse($1, 0, `',
-               `uploop(`_i', 1, $1, `format(`u%d, ', _i)', `format(`u%d', _i)')')')
+               `uploop(`_i', 1, $1, ``u''`_i, ', ``u''`_i')')')
 \ icall(argnum)
 define(icall,
-`icall$1	( argflist($1)u -- uret )	gforth
+`icall$1	( argflist($1) u -- uret )	gforth
 uret = (SYSCALL(Cell(*)(argdlist($1)))u)(argclist($1));
 
 ')
 define(fcall,
-`fcall$1	( argflist($1)u -- rret )	gforth
+`fcall$1	( argflist($1) u -- rret )	gforth
 rret = (SYSCALL(Float(*)(argdlist($1)))u)(argclist($1));
 
 ')