--- gforth/prim	2006/06/09 15:51:24	1.195
+++ gforth/prim	2007/03/25 21:30:59	1.208
@@ -1,6 +1,6 @@
 \ Gforth primitives
 
-\ Copyright (C) 1995,1996,1997,1998,2000,2003,2004,2005 Free Software Foundation, Inc.
+\ Copyright (C) 1995,1996,1997,1998,2000,2003,2004,2005,2006 Free Software Foundation, Inc.
 
 \ This file is part of Gforth.
 
@@ -809,12 +809,21 @@ n = n1*n2;
 
 /	( n1 n2 -- n )		core	slash
 n = n1/n2;
-if(FLOORED_DIV && ((n1^n2) < 0) && (n1%n2 != 0)) n--;
+if (CHECK_DIVISION_SW && n2 == 0)
+  throw(BALL_DIVZERO);
+if (CHECK_DIVISION_SW && n2 == -1 && n1 == CELL_MIN)
+  throw(BALL_RESULTRANGE);
+if (FLOORED_DIV && ((n1^n2) < 0) && (n1%n2 != 0))
+  n--;
 :
  /mod nip ;
 
 mod	( n1 n2 -- n )		core
 n = n1%n2;
+if (CHECK_DIVISION_SW && n2 == 0)
+  throw(BALL_DIVZERO);
+if (CHECK_DIVISION_SW && n2 == -1 && n1 == CELL_MIN)
+  throw(BALL_RESULTRANGE);
 if(FLOORED_DIV && ((n1^n2) < 0) && n!=0) n += n2;
 :
  /mod drop ;
@@ -822,6 +831,10 @@ if(FLOORED_DIV && ((n1^n2) < 0) && n!=0)
 /mod	( n1 n2 -- n3 n4 )		core		slash_mod
 n4 = n1/n2;
 n3 = n1%n2; /* !! is this correct? look into C standard! */
+if (CHECK_DIVISION_SW && n2 == 0)
+  throw(BALL_DIVZERO);
+if (CHECK_DIVISION_SW && n2 == -1 && n1 == CELL_MIN)
+  throw(BALL_RESULTRANGE);
 if (FLOORED_DIV && ((n1^n2) < 0) && n3!=0) {
   n4--;
   n3+=n2;
@@ -836,18 +849,18 @@ DCell d = mmul(n1,n2);
 #else
 DCell d = (DCell)n1 * (DCell)n2;
 #endif
-#ifdef BUGGY_LL_DIV
-DCell r = fmdiv(d,n3);
-n4=DHI(r);
-n5=DLO(r);
-#else
-/* assumes that the processor uses either floored or symmetric division */
-n5 = d/n3;
-n4 = d%n3;
+#ifdef ASM_SM_SLASH_REM
+ASM_SM_SLASH_REM(DLO(d), DHI(d), n3, n4, n5);
 if (FLOORED_DIV && ((DHI(d)^n3)<0) && n4!=0) {
+  if (CHECK_DIVISION && n5 == CELL_MIN)
+    throw(BALL_RESULTRANGE);
   n5--;
   n4+=n3;
 }
+#else
+DCell r = FLOORED_DIV ? fmdiv(d,n3) : smdiv(d,n3);
+n4=DHI(r);
+n5=DLO(r);
 #endif
 :
  >r m* r> fm/mod ;
@@ -859,13 +872,17 @@ DCell d = mmul(n1,n2);
 #else
 DCell d = (DCell)n1 * (DCell)n2;
 #endif
-#ifdef BUGGY_LL_DIV
-DCell r = fmdiv(d,n3);
-n4=DLO(r);
+#ifdef ASM_SM_SLASH_REM
+Cell remainder;
+ASM_SM_SLASH_REM(DLO(d), DHI(d), n3, remainder, n4);
+if (FLOORED_DIV && ((DHI(d)^n3)<0) && remainder!=0) {
+  if (CHECK_DIVISION && n4 == CELL_MIN)
+    throw(BALL_RESULTRANGE);
+  n4--;
+}
 #else
-/* assumes that the processor uses either floored or symmetric division */
-n4 = d/n3;
-if (FLOORED_DIV && ((DHI(d)^n3)<0) && (d%n3)!=0) n4--;
+DCell r = FLOORED_DIV ? fmdiv(d,n3) : smdiv(d,n3);
+n4=DLO(r);
 #endif
 :
  */mod nip ;
@@ -889,10 +906,11 @@ n2 = n1>>1;
 
 fm/mod	( d1 n1 -- n2 n3 )		core		f_m_slash_mod
 ""Floored division: @i{d1} = @i{n3}*@i{n1}+@i{n2}, @i{n1}>@i{n2}>=0 or 0>=@i{n2}>@i{n1}.""
-#ifdef BUGGY_LL_DIV
 #ifdef ASM_SM_SLASH_REM
-ASM_SM_SLASH_REM(d1.lo, d1.hi, n1, n2, n3);
+ASM_SM_SLASH_REM(DLO(d1), DHI(d1), n1, n2, n3);
 if (((DHI(d1)^n1)<0) && n2!=0) {
+  if (CHECK_DIVISION && n3 == CELL_MIN)
+    throw(BALL_RESULTRANGE);
   n3--;
   n2+=n1;
 }
@@ -901,24 +919,6 @@ DCell r = fmdiv(d1,n1);
 n2=DHI(r);
 n3=DLO(r);
 #endif /* !defined(ASM_SM_SLASH_REM) */
-#else
-#ifdef ASM_SM_SLASH_REM4
-ASM_SM_SLASH_REM4(d1, n1, n2, n3);
-if (((DHI(d1)^n1)<0) && n2!=0) {
-  n3--;
-  n2+=n1;
-}
-#else /* !defined(ASM_SM_SLASH_REM4) */
-/* assumes that the processor uses either floored or symmetric division */
-n3 = d1/n1;
-n2 = d1%n1;
-/* note that this 1%-3>0 is optimized by the compiler */
-if (1%-3>0 && ((DHI(d1)^n1)<0) && n2!=0) {
-  n3--;
-  n2+=n1;
-}
-#endif /* !defined(ASM_SM_SLASH_REM4) */
-#endif
 :
  dup >r dup 0< IF  negate >r dnegate r>  THEN
  over       0< IF  tuck + swap  THEN
@@ -927,28 +927,13 @@ if (1%-3>0 && ((DHI(d1)^n1)<0) && n2!=0)
 
 sm/rem	( d1 n1 -- n2 n3 )		core		s_m_slash_rem
 ""Symmetric division: @i{d1} = @i{n3}*@i{n1}+@i{n2}, sign(@i{n2})=sign(@i{d1}) or 0.""
-#ifdef BUGGY_LL_DIV
 #ifdef ASM_SM_SLASH_REM
-ASM_SM_SLASH_REM(d1.lo, d1.hi, n1, n2, n3);
+ASM_SM_SLASH_REM(DLO(d1), DHI(d1), n1, n2, n3);
 #else /* !defined(ASM_SM_SLASH_REM) */
 DCell r = smdiv(d1,n1);
 n2=DHI(r);
 n3=DLO(r);
 #endif /* !defined(ASM_SM_SLASH_REM) */
-#else
-#ifdef ASM_SM_SLASH_REM4
-ASM_SM_SLASH_REM4(d1, n1, n2, n3);
-#else /* !defined(ASM_SM_SLASH_REM4) */
-/* assumes that the processor uses either floored or symmetric division */
-n3 = d1/n1;
-n2 = d1%n1;
-/* note that this 1%-3<0 is optimized by the compiler */
-if (1%-3<0 && ((DHI(d1)^n1)<0) && n2!=0) {
-  n3++;
-  n2-=n1;
-}
-#endif /* !defined(ASM_SM_SLASH_REM4) */
-#endif
 :
  over >r dup >r abs -rot
  dabs rot um/mod
@@ -984,22 +969,13 @@ ud = (UDCell)u1 * (UDCell)u2;
 
 um/mod	( ud u1 -- u2 u3 )		core	u_m_slash_mod
 ""ud=u3*u1+u2, u1>u2>=0""
-#ifdef BUGGY_LL_DIV
 #ifdef ASM_UM_SLASH_MOD
-ASM_UM_SLASH_MOD(ud.lo, ud.hi, u1, u2, u3);
+ASM_UM_SLASH_MOD(DLO(ud), DHI(ud), u1, u2, u3);
 #else /* !defined(ASM_UM_SLASH_MOD) */
 UDCell r = umdiv(ud,u1);
 u2=DHI(r);
 u3=DLO(r);
 #endif /* !defined(ASM_UM_SLASH_MOD) */
-#else
-#ifdef ASM_UM_SLASH_MOD4
-ASM_UM_SLASH_MOD4(ud, u1, u2, u3);
-#else /* !defined(ASM_UM_SLASH_MOD4) */
-u3 = ud/u1;
-u2 = ud%u1;
-#endif /* !defined(ASM_UM_SLASH_MOD4) */
-#endif
 :
    0 swap [ 8 cells 1 + ] literal 0
    ?DO /modstep
@@ -1052,12 +1028,7 @@ d2 = -d1;
 
 d2*	( d1 -- d2 )		double		d_two_star
 ""Shift left by 1; also works on unsigned numbers""
-#ifdef BUGGY_LL_SHIFT
-DLO_IS(d2, DLO(d1)<<1);
-DHI_IS(d2, (DHI(d1)<<1) | (DLO(d1)>>(CELL_BITS-1)));
-#else
-d2 = 2*d1;
-#endif
+d2 = DLSHIFT(d1,1);
 :
  2dup d+ ;
 
@@ -1671,8 +1642,6 @@ f = key_query((FILE*)wfileid);
 f = key_query(stdin);
 #endif
 
-\+os
-
 stdin	( -- wfileid )	gforth
 ""The standard input file of the Gforth process.""
 wfileid = (Cell)stdin;
@@ -1685,6 +1654,8 @@ stderr	( -- wfileid )	gforth
 ""The standard error output file of the Gforth process.""
 wfileid = (Cell)stderr;
 
+\+os
+
 form	( -- urows ucols )	gforth
 ""The number of lines and columns in the terminal. These numbers may change
 with the window size.""
@@ -2766,11 +2737,7 @@ ffi-ret-dlong ( d -- )	gforth ffi_ret_dl
 return 0;
 
 ffi-ret-long ( n -- )	gforth ffi_ret_long
-#ifdef BUGGY_LONG_LONG
-*(Cell*)(gforth_ritem) = DLO(n);
-#else
 *(Cell*)(gforth_ritem) = n;
-#endif
 return 0;
 
 ffi-ret-ptr ( c_addr -- )	gforth ffi_ret_ptr
@@ -2794,10 +2761,11 @@ define(`uploop',
 define(`_uploop',
        `ifelse($1, `$3', `$5',
 	       `$4`'define(`$1', incr($1))_uploop(`$1', `$2', `$3', `$4', `$5')')')
+
 \ argflist(argnum): Forth argument list
 define(argflist,
        `ifelse($1, 0, `',
-               `uploop(`_i', 1, $1, `format(`u%d ', _i)', `format(`u%d ', _i)')')')
+               `uploop(`_i', 1, $1, ``u''`_i ', ``u''`_i')')')
 \ argdlist(argnum): declare C's arguments
 define(argdlist,
        `ifelse($1, 0, `',
@@ -2805,15 +2773,15 @@ define(argdlist,
 \ argclist(argnum): pass C's arguments
 define(argclist,
        `ifelse($1, 0, `',
-               `uploop(`_i', 1, $1, `format(`u%d, ', _i)', `format(`u%d', _i)')')')
+               `uploop(`_i', 1, $1, ``u''`_i, ', ``u''`_i')')')
 \ icall(argnum)
 define(icall,
-`icall$1	( argflist($1)u -- uret )	gforth
+`icall$1	( argflist($1) u -- uret )	gforth
 uret = (SYSCALL(Cell(*)(argdlist($1)))u)(argclist($1));
 
 ')
 define(fcall,
-`fcall$1	( argflist($1)u -- rret )	gforth
+`fcall$1	( argflist($1) u -- rret )	gforth
 rret = (SYSCALL(Float(*)(argdlist($1)))u)(argclist($1));
 
 ')