Annotation of gforth/ltmain.sh, revision 1.1
1.1 ! anton 1: # Generated from ltmain.m4sh.
! 2:
! 3: # ltmain.sh (GNU libtool) 2.2.2
! 4: # Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
! 5:
! 6: # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc.
! 7: # This is free software; see the source for copying conditions. There is NO
! 8: # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
! 9:
! 10: # GNU Libtool is free software; you can redistribute it and/or modify
! 11: # it under the terms of the GNU General Public License as published by
! 12: # the Free Software Foundation; either version 2 of the License, or
! 13: # (at your option) any later version.
! 14: #
! 15: # As a special exception to the GNU General Public License,
! 16: # if you distribute this file as part of a program or library that
! 17: # is built using GNU Libtool, you may include this file under the
! 18: # same distribution terms that you use for the rest of that program.
! 19: #
! 20: # GNU Libtool is distributed in the hope that it will be useful, but
! 21: # WITHOUT ANY WARRANTY; without even the implied warranty of
! 22: # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
! 23: # General Public License for more details.
! 24: #
! 25: # You should have received a copy of the GNU General Public License
! 26: # along with GNU Libtool; see the file COPYING. If not, a copy
! 27: # can be downloaded from http://www.gnu.org/licenses/gpl.html,
! 28: # or obtained by writing to the Free Software Foundation, Inc.,
! 29: # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
! 30:
! 31: # Usage: $progname [OPTION]... [MODE-ARG]...
! 32: #
! 33: # Provide generalized library-building support services.
! 34: #
! 35: # --config show all configuration variables
! 36: # --debug enable verbose shell tracing
! 37: # -n, --dry-run display commands without modifying any files
! 38: # --features display basic configuration information and exit
! 39: # --mode=MODE use operation mode MODE
! 40: # --preserve-dup-deps don't remove duplicate dependency libraries
! 41: # --quiet, --silent don't print informational messages
! 42: # --tag=TAG use configuration variables from tag TAG
! 43: # -v, --verbose print informational messages (default)
! 44: # --version print version information
! 45: # -h, --help print short or long help message
! 46: #
! 47: # MODE must be one of the following:
! 48: #
! 49: # clean remove files from the build directory
! 50: # compile compile a source file into a libtool object
! 51: # execute automatically set library path, then run a program
! 52: # finish complete the installation of libtool libraries
! 53: # install install libraries or executables
! 54: # link create a library or an executable
! 55: # uninstall remove libraries from an installed directory
! 56: #
! 57: # MODE-ARGS vary depending on the MODE.
! 58: # Try `$progname --help --mode=MODE' for a more detailed description of MODE.
! 59: #
! 60: # When reporting a bug, please describe a test case to reproduce it and
! 61: # include the following information:
! 62: #
! 63: # host-triplet: $host
! 64: # shell: $SHELL
! 65: # compiler: $LTCC
! 66: # compiler flags: $LTCFLAGS
! 67: # linker: $LD (gnu? $with_gnu_ld)
! 68: # $progname: (GNU libtool) 2.2.2
! 69: # automake: $automake_version
! 70: # autoconf: $autoconf_version
! 71: #
! 72: # Report bugs to <bug-libtool@gnu.org>.
! 73:
! 74: PROGRAM=ltmain.sh
! 75: PACKAGE=libtool
! 76: VERSION=2.2.2
! 77: TIMESTAMP=""
! 78: package_revision=1.2627
! 79:
! 80: # Be Bourne compatible
! 81: if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
! 82: emulate sh
! 83: NULLCMD=:
! 84: # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
! 85: # is contrary to our usage. Disable this feature.
! 86: alias -g '${1+"$@"}'='"$@"'
! 87: setopt NO_GLOB_SUBST
! 88: else
! 89: case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
! 90: fi
! 91: BIN_SH=xpg4; export BIN_SH # for Tru64
! 92: DUALCASE=1; export DUALCASE # for MKS sh
! 93:
! 94: # NLS nuisances: We save the old values to restore during execute mode.
! 95: # Only set LANG and LC_ALL to C if already set.
! 96: # These must not be set unconditionally because not all systems understand
! 97: # e.g. LANG=C (notably SCO).
! 98: lt_user_locale=
! 99: lt_safe_locale=
! 100: for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
! 101: do
! 102: eval "if test \"\${$lt_var+set}\" = set; then
! 103: save_$lt_var=\$$lt_var
! 104: $lt_var=C
! 105: export $lt_var
! 106: lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
! 107: lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
! 108: fi"
! 109: done
! 110:
! 111: $lt_unset CDPATH
! 112:
! 113:
! 114:
! 115:
! 116:
! 117: : ${CP="cp -f"}
! 118: : ${ECHO="echo"}
! 119: : ${EGREP="/usr/bin/grep -E"}
! 120: : ${FGREP="/usr/bin/grep -F"}
! 121: : ${GREP="/usr/bin/grep"}
! 122: : ${LN_S="ln -s"}
! 123: : ${MAKE="make"}
! 124: : ${MKDIR="mkdir"}
! 125: : ${MV="mv -f"}
! 126: : ${RM="rm -f"}
! 127: : ${SED="/opt/local/bin/gsed"}
! 128: : ${SHELL="${CONFIG_SHELL-/bin/sh}"}
! 129: : ${Xsed="$SED -e 1s/^X//"}
! 130:
! 131: # Global variables:
! 132: EXIT_SUCCESS=0
! 133: EXIT_FAILURE=1
! 134: EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing.
! 135: EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake.
! 136:
! 137: exit_status=$EXIT_SUCCESS
! 138:
! 139: # Make sure IFS has a sensible default
! 140: lt_nl='
! 141: '
! 142: IFS=" $lt_nl"
! 143:
! 144: dirname="s,/[^/]*$,,"
! 145: basename="s,^.*/,,"
! 146:
! 147: # Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
! 148: # is ksh but when the shell is invoked as "sh" and the current value of
! 149: # the _XPG environment variable is not equal to 1 (one), the special
! 150: # positional parameter $0, within a function call, is the name of the
! 151: # function.
! 152: progpath="$0"
! 153:
! 154: # The name of this program:
! 155: # In the unlikely event $progname began with a '-', it would play havoc with
! 156: # func_echo (imagine progname=-n), so we prepend ./ in that case:
! 157: progname=`$ECHO "X$progpath" | $Xsed -e "$basename" -e 's,^-,./-,'`
! 158:
! 159: # Make sure we have an absolute path for reexecution:
! 160: case $progpath in
! 161: [\\/]*|[A-Za-z]:\\*) ;;
! 162: *[\\/]*)
! 163: progdir=`$ECHO "X$progpath" | $Xsed -e "$dirname"`
! 164: progdir=`cd "$progdir" && pwd`
! 165: progpath="$progdir/$progname"
! 166: ;;
! 167: *)
! 168: save_IFS="$IFS"
! 169: IFS=:
! 170: for progdir in $PATH; do
! 171: IFS="$save_IFS"
! 172: test -x "$progdir/$progname" && break
! 173: done
! 174: IFS="$save_IFS"
! 175: test -n "$progdir" || progdir=`pwd`
! 176: progpath="$progdir/$progname"
! 177: ;;
! 178: esac
! 179:
! 180: # Sed substitution that helps us do robust quoting. It backslashifies
! 181: # metacharacters that are still active within double-quoted strings.
! 182: Xsed="${SED}"' -e 1s/^X//'
! 183: sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
! 184:
! 185: # Same as above, but do not quote variable references.
! 186: double_quote_subst='s/\(["`\\]\)/\\\1/g'
! 187:
! 188: # Re-`\' parameter expansions in output of double_quote_subst that were
! 189: # `\'-ed in input to the same. If an odd number of `\' preceded a '$'
! 190: # in input to double_quote_subst, that '$' was protected from expansion.
! 191: # Since each input `\' is now two `\'s, look for any number of runs of
! 192: # four `\'s followed by two `\'s and then a '$'. `\' that '$'.
! 193: bs='\\'
! 194: bs2='\\\\'
! 195: bs4='\\\\\\\\'
! 196: dollar='\$'
! 197: sed_double_backslash="\
! 198: s/$bs4/&\\
! 199: /g
! 200: s/^$bs2$dollar/$bs&/
! 201: s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
! 202: s/\n//g"
! 203:
! 204: # Standard options:
! 205: opt_dry_run=false
! 206: opt_help=false
! 207: opt_quiet=false
! 208: opt_verbose=false
! 209:
! 210: # func_echo arg...
! 211: # Echo program name prefixed message, along with the current mode
! 212: # name if it has been set yet.
! 213: func_echo ()
! 214: {
! 215: $ECHO "$progname${mode+: }$mode: $*"
! 216: }
! 217:
! 218: # func_verbose arg...
! 219: # Echo program name prefixed message in verbose mode only.
! 220: func_verbose ()
! 221: {
! 222: $opt_verbose && func_echo ${1+"$@"}
! 223:
! 224: # A bug in bash halts the script if the last line of a function
! 225: # fails when set -e is in force, so we need another command to
! 226: # work around that:
! 227: :
! 228: }
! 229:
! 230: # func_error arg...
! 231: # Echo program name prefixed message to standard error.
! 232: func_error ()
! 233: {
! 234: $ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2
! 235: }
! 236:
! 237: # func_warning arg...
! 238: # Echo program name prefixed warning message to standard error.
! 239: func_warning ()
! 240: {
! 241: $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2
! 242: }
! 243:
! 244: # func_fatal_error arg...
! 245: # Echo program name prefixed message to standard error, and exit.
! 246: func_fatal_error ()
! 247: {
! 248: func_error ${1+"$@"}
! 249: exit $EXIT_FAILURE
! 250: }
! 251:
! 252: # func_fatal_help arg...
! 253: # Echo program name prefixed message to standard error, followed by
! 254: # a help hint, and exit.
! 255: func_fatal_help ()
! 256: {
! 257: func_error ${1+"$@"}
! 258: func_fatal_error "$help"
! 259: }
! 260: help="Try \`$progname --help' for more information." ## default
! 261:
! 262:
! 263: # func_grep expression filename
! 264: # Check whether EXPRESSION matches any line of FILENAME, without output.
! 265: func_grep ()
! 266: {
! 267: $GREP "$1" "$2" >/dev/null 2>&1
! 268: }
! 269:
! 270:
! 271: # func_mkdir_p directory-path
! 272: # Make sure the entire path to DIRECTORY-PATH is available.
! 273: func_mkdir_p ()
! 274: {
! 275: my_directory_path="$1"
! 276: my_dir_list=
! 277:
! 278: if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
! 279:
! 280: # Protect directory names starting with `-'
! 281: case $my_directory_path in
! 282: -*) my_directory_path="./$my_directory_path" ;;
! 283: esac
! 284:
! 285: # While some portion of DIR does not yet exist...
! 286: while test ! -d "$my_directory_path"; do
! 287: # ...make a list in topmost first order. Use a colon delimited
! 288: # list incase some portion of path contains whitespace.
! 289: my_dir_list="$my_directory_path:$my_dir_list"
! 290:
! 291: # If the last portion added has no slash in it, the list is done
! 292: case $my_directory_path in */*) ;; *) break ;; esac
! 293:
! 294: # ...otherwise throw away the child directory and loop
! 295: my_directory_path=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"`
! 296: done
! 297: my_dir_list=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'`
! 298:
! 299: save_mkdir_p_IFS="$IFS"; IFS=':'
! 300: for my_dir in $my_dir_list; do
! 301: IFS="$save_mkdir_p_IFS"
! 302: # mkdir can fail with a `File exist' error if two processes
! 303: # try to create one of the directories concurrently. Don't
! 304: # stop in that case!
! 305: $MKDIR "$my_dir" 2>/dev/null || :
! 306: done
! 307: IFS="$save_mkdir_p_IFS"
! 308:
! 309: # Bail out if we (or some other process) failed to create a directory.
! 310: test -d "$my_directory_path" || \
! 311: func_fatal_error "Failed to create \`$1'"
! 312: fi
! 313: }
! 314:
! 315:
! 316: # func_mktempdir [string]
! 317: # Make a temporary directory that won't clash with other running
! 318: # libtool processes, and avoids race conditions if possible. If
! 319: # given, STRING is the basename for that directory.
! 320: func_mktempdir ()
! 321: {
! 322: my_template="${TMPDIR-/tmp}/${1-$progname}"
! 323:
! 324: if test "$opt_dry_run" = ":"; then
! 325: # Return a directory name, but don't create it in dry-run mode
! 326: my_tmpdir="${my_template}-$$"
! 327: else
! 328:
! 329: # If mktemp works, use that first and foremost
! 330: my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
! 331:
! 332: if test ! -d "$my_tmpdir"; then
! 333: # Failing that, at least try and use $RANDOM to avoid a race
! 334: my_tmpdir="${my_template}-${RANDOM-0}$$"
! 335:
! 336: save_mktempdir_umask=`umask`
! 337: umask 0077
! 338: $MKDIR "$my_tmpdir"
! 339: umask $save_mktempdir_umask
! 340: fi
! 341:
! 342: # If we're not in dry-run mode, bomb out on failure
! 343: test -d "$my_tmpdir" || \
! 344: func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
! 345: fi
! 346:
! 347: $ECHO "X$my_tmpdir" | $Xsed
! 348: }
! 349:
! 350:
! 351: # func_quote_for_eval arg
! 352: # Aesthetically quote ARG to be evaled later.
! 353: # This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
! 354: # is double-quoted, suitable for a subsequent eval, whereas
! 355: # FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
! 356: # which are still active within double quotes backslashified.
! 357: func_quote_for_eval ()
! 358: {
! 359: case $1 in
! 360: *[\\\`\"\$]*)
! 361: func_quote_for_eval_unquoted_result=`$ECHO "X$1" | $Xsed -e "$sed_quote_subst"` ;;
! 362: *)
! 363: func_quote_for_eval_unquoted_result="$1" ;;
! 364: esac
! 365:
! 366: case $func_quote_for_eval_unquoted_result in
! 367: # Double-quote args containing shell metacharacters to delay
! 368: # word splitting, command substitution and and variable
! 369: # expansion for a subsequent eval.
! 370: # Many Bourne shells cannot handle close brackets correctly
! 371: # in scan sets, so we specify it separately.
! 372: *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
! 373: func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
! 374: ;;
! 375: *)
! 376: func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
! 377: esac
! 378: }
! 379:
! 380:
! 381: # func_quote_for_expand arg
! 382: # Aesthetically quote ARG to be evaled later; same as above,
! 383: # but do not quote variable references.
! 384: func_quote_for_expand ()
! 385: {
! 386: case $1 in
! 387: *[\\\`\"]*)
! 388: my_arg=`$ECHO "X$1" | $Xsed \
! 389: -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
! 390: *)
! 391: my_arg="$1" ;;
! 392: esac
! 393:
! 394: case $my_arg in
! 395: # Double-quote args containing shell metacharacters to delay
! 396: # word splitting and command substitution for a subsequent eval.
! 397: # Many Bourne shells cannot handle close brackets correctly
! 398: # in scan sets, so we specify it separately.
! 399: *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
! 400: my_arg="\"$my_arg\""
! 401: ;;
! 402: esac
! 403:
! 404: func_quote_for_expand_result="$my_arg"
! 405: }
! 406:
! 407:
! 408: # func_show_eval cmd [fail_exp]
! 409: # Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
! 410: # not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
! 411: # is given, then evaluate it.
! 412: func_show_eval ()
! 413: {
! 414: my_cmd="$1"
! 415: my_fail_exp="${2-:}"
! 416:
! 417: ${opt_silent-false} || {
! 418: func_quote_for_expand "$my_cmd"
! 419: eval "func_echo $func_quote_for_expand_result"
! 420: }
! 421:
! 422: if ${opt_dry_run-false}; then :; else
! 423: eval "$my_cmd"
! 424: my_status=$?
! 425: if test "$my_status" -eq 0; then :; else
! 426: eval "(exit $my_status); $my_fail_exp"
! 427: fi
! 428: fi
! 429: }
! 430:
! 431:
! 432: # func_show_eval_locale cmd [fail_exp]
! 433: # Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
! 434: # not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
! 435: # is given, then evaluate it. Use the saved locale for evaluation.
! 436: func_show_eval_locale ()
! 437: {
! 438: my_cmd="$1"
! 439: my_fail_exp="${2-:}"
! 440:
! 441: ${opt_silent-false} || {
! 442: func_quote_for_expand "$my_cmd"
! 443: eval "func_echo $func_quote_for_expand_result"
! 444: }
! 445:
! 446: if ${opt_dry_run-false}; then :; else
! 447: eval "$lt_user_locale
! 448: $my_cmd"
! 449: my_status=$?
! 450: eval "$lt_safe_locale"
! 451: if test "$my_status" -eq 0; then :; else
! 452: eval "(exit $my_status); $my_fail_exp"
! 453: fi
! 454: fi
! 455: }
! 456:
! 457:
! 458:
! 459:
! 460:
! 461: # func_version
! 462: # Echo version message to standard output and exit.
! 463: func_version ()
! 464: {
! 465: $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / {
! 466: s/^# //
! 467: s/^# *$//
! 468: s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
! 469: p
! 470: }' < "$progpath"
! 471: exit $?
! 472: }
! 473:
! 474: # func_usage
! 475: # Echo short help message to standard output and exit.
! 476: func_usage ()
! 477: {
! 478: $SED -n '/^# Usage:/,/# -h/ {
! 479: s/^# //
! 480: s/^# *$//
! 481: s/\$progname/'$progname'/
! 482: p
! 483: }' < "$progpath"
! 484: $ECHO
! 485: $ECHO "run \`$progname --help | more' for full usage"
! 486: exit $?
! 487: }
! 488:
! 489: # func_help
! 490: # Echo long help message to standard output and exit.
! 491: func_help ()
! 492: {
! 493: $SED -n '/^# Usage:/,/# Report bugs to/ {
! 494: s/^# //
! 495: s/^# *$//
! 496: s*\$progname*'$progname'*
! 497: s*\$host*'"$host"'*
! 498: s*\$SHELL*'"$SHELL"'*
! 499: s*\$LTCC*'"$LTCC"'*
! 500: s*\$LTCFLAGS*'"$LTCFLAGS"'*
! 501: s*\$LD*'"$LD"'*
! 502: s/\$with_gnu_ld/'"$with_gnu_ld"'/
! 503: s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/
! 504: s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/
! 505: p
! 506: }' < "$progpath"
! 507: exit $?
! 508: }
! 509:
! 510: # func_missing_arg argname
! 511: # Echo program name prefixed message to standard error and set global
! 512: # exit_cmd.
! 513: func_missing_arg ()
! 514: {
! 515: func_error "missing argument for $1"
! 516: exit_cmd=exit
! 517: }
! 518:
! 519: exit_cmd=:
! 520:
! 521:
! 522:
! 523:
! 524:
! 525: # Check that we have a working $ECHO.
! 526: if test "X$1" = X--no-reexec; then
! 527: # Discard the --no-reexec flag, and continue.
! 528: shift
! 529: elif test "X$1" = X--fallback-echo; then
! 530: # Avoid inline document here, it may be left over
! 531: :
! 532: elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then
! 533: # Yippee, $ECHO works!
! 534: :
! 535: else
! 536: # Restart under the correct shell, and then maybe $ECHO will work.
! 537: exec $SHELL "$progpath" --no-reexec ${1+"$@"}
! 538: fi
! 539:
! 540: if test "X$1" = X--fallback-echo; then
! 541: # used as fallback echo
! 542: shift
! 543: cat <<EOF
! 544: $*
! 545: EOF
! 546: exit $EXIT_SUCCESS
! 547: fi
! 548:
! 549: magic="%%%MAGIC variable%%%"
! 550: magic_exe="%%%MAGIC EXE variable%%%"
! 551:
! 552: # Global variables.
! 553: # $mode is unset
! 554: nonopt=
! 555: execute_dlfiles=
! 556: preserve_args=
! 557: lo2o="s/\\.lo\$/.${objext}/"
! 558: o2lo="s/\\.${objext}\$/.lo/"
! 559: extracted_archives=
! 560: extracted_serial=0
! 561:
! 562: opt_dry_run=false
! 563: opt_duplicate_deps=false
! 564: opt_silent=false
! 565: opt_debug=:
! 566:
! 567: # If this variable is set in any of the actions, the command in it
! 568: # will be execed at the end. This prevents here-documents from being
! 569: # left over by shells.
! 570: exec_cmd=
! 571:
! 572: # func_fatal_configuration arg...
! 573: # Echo program name prefixed message to standard error, followed by
! 574: # a configuration failure hint, and exit.
! 575: func_fatal_configuration ()
! 576: {
! 577: func_error ${1+"$@"}
! 578: func_error "See the $PACKAGE documentation for more information."
! 579: func_fatal_error "Fatal configuration error."
! 580: }
! 581:
! 582:
! 583: # func_config
! 584: # Display the configuration for all the tags in this script.
! 585: func_config ()
! 586: {
! 587: re_begincf='^# ### BEGIN LIBTOOL'
! 588: re_endcf='^# ### END LIBTOOL'
! 589:
! 590: # Default configuration.
! 591: $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"
! 592:
! 593: # Now print the configurations for the tags.
! 594: for tagname in $taglist; do
! 595: $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"
! 596: done
! 597:
! 598: exit $?
! 599: }
! 600:
! 601: # func_features
! 602: # Display the features supported by this script.
! 603: func_features ()
! 604: {
! 605: $ECHO "host: $host"
! 606: if test "$build_libtool_libs" = yes; then
! 607: $ECHO "enable shared libraries"
! 608: else
! 609: $ECHO "disable shared libraries"
! 610: fi
! 611: if test "$build_old_libs" = yes; then
! 612: $ECHO "enable static libraries"
! 613: else
! 614: $ECHO "disable static libraries"
! 615: fi
! 616:
! 617: exit $?
! 618: }
! 619:
! 620: # func_enable_tag tagname
! 621: # Verify that TAGNAME is valid, and either flag an error and exit, or
! 622: # enable the TAGNAME tag. We also add TAGNAME to the global $taglist
! 623: # variable here.
! 624: func_enable_tag ()
! 625: {
! 626: # Global variable:
! 627: tagname="$1"
! 628:
! 629: re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
! 630: re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
! 631: sed_extractcf="/$re_begincf/,/$re_endcf/p"
! 632:
! 633: # Validate tagname.
! 634: case $tagname in
! 635: *[!-_A-Za-z0-9,/]*)
! 636: func_fatal_error "invalid tag name: $tagname"
! 637: ;;
! 638: esac
! 639:
! 640: # Don't test for the "default" C tag, as we know it's
! 641: # there but not specially marked.
! 642: case $tagname in
! 643: CC) ;;
! 644: *)
! 645: if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
! 646: taglist="$taglist $tagname"
! 647:
! 648: # Evaluate the configuration. Be careful to quote the path
! 649: # and the sed script, to avoid splitting on whitespace, but
! 650: # also don't use non-portable quotes within backquotes within
! 651: # quotes we have to do it in 2 steps:
! 652: extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
! 653: eval "$extractedcf"
! 654: else
! 655: func_error "ignoring unknown tag $tagname"
! 656: fi
! 657: ;;
! 658: esac
! 659: }
! 660:
! 661:
! 662: func_mode_help ()
! 663: {
! 664: # We need to display help for each of the modes.
! 665: case $mode in
! 666: "")
! 667: # Generic help is extracted from the usage comments
! 668: # at the start of this file.
! 669: func_help
! 670: ;;
! 671:
! 672: clean)
! 673: $ECHO \
! 674: "Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
! 675:
! 676: Remove files from the build directory.
! 677:
! 678: RM is the name of the program to use to delete files associated with each FILE
! 679: (typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
! 680: to RM.
! 681:
! 682: If FILE is a libtool library, object or program, all the files associated
! 683: with it are deleted. Otherwise, only FILE itself is deleted using RM."
! 684: ;;
! 685:
! 686: compile)
! 687: $ECHO \
! 688: "Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
! 689:
! 690: Compile a source file into a libtool library object.
! 691:
! 692: This mode accepts the following additional options:
! 693:
! 694: -o OUTPUT-FILE set the output file name to OUTPUT-FILE
! 695: -no-suppress do not suppress compiler output for multiple passes
! 696: -prefer-pic try to building PIC objects only
! 697: -prefer-non-pic try to building non-PIC objects only
! 698: -shared do not build a \`.o' file suitable for static linking
! 699: -static only build a \`.o' file suitable for static linking
! 700:
! 701: COMPILE-COMMAND is a command to be used in creating a \`standard' object file
! 702: from the given SOURCEFILE.
! 703:
! 704: The output file name is determined by removing the directory component from
! 705: SOURCEFILE, then substituting the C source code suffix \`.c' with the
! 706: library object suffix, \`.lo'."
! 707: ;;
! 708:
! 709: execute)
! 710: $ECHO \
! 711: "Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
! 712:
! 713: Automatically set library path, then run a program.
! 714:
! 715: This mode accepts the following additional options:
! 716:
! 717: -dlopen FILE add the directory containing FILE to the library path
! 718:
! 719: This mode sets the library path environment variable according to \`-dlopen'
! 720: flags.
! 721:
! 722: If any of the ARGS are libtool executable wrappers, then they are translated
! 723: into their corresponding uninstalled binary, and any of their required library
! 724: directories are added to the library path.
! 725:
! 726: Then, COMMAND is executed, with ARGS as arguments."
! 727: ;;
! 728:
! 729: finish)
! 730: $ECHO \
! 731: "Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
! 732:
! 733: Complete the installation of libtool libraries.
! 734:
! 735: Each LIBDIR is a directory that contains libtool libraries.
! 736:
! 737: The commands that this mode executes may require superuser privileges. Use
! 738: the \`--dry-run' option if you just want to see what would be executed."
! 739: ;;
! 740:
! 741: install)
! 742: $ECHO \
! 743: "Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
! 744:
! 745: Install executables or libraries.
! 746:
! 747: INSTALL-COMMAND is the installation command. The first component should be
! 748: either the \`install' or \`cp' program.
! 749:
! 750: The following components of INSTALL-COMMAND are treated specially:
! 751:
! 752: -inst-prefix PREFIX-DIR Use PREFIX-DIR as a staging area for installation
! 753:
! 754: The rest of the components are interpreted as arguments to that command (only
! 755: BSD-compatible install options are recognized)."
! 756: ;;
! 757:
! 758: link)
! 759: $ECHO \
! 760: "Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
! 761:
! 762: Link object files or libraries together to form another library, or to
! 763: create an executable program.
! 764:
! 765: LINK-COMMAND is a command using the C compiler that you would use to create
! 766: a program from several object files.
! 767:
! 768: The following components of LINK-COMMAND are treated specially:
! 769:
! 770: -all-static do not do any dynamic linking at all
! 771: -avoid-version do not add a version suffix if possible
! 772: -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime
! 773: -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
! 774: -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
! 775: -export-symbols SYMFILE
! 776: try to export only the symbols listed in SYMFILE
! 777: -export-symbols-regex REGEX
! 778: try to export only the symbols matching REGEX
! 779: -LLIBDIR search LIBDIR for required installed libraries
! 780: -lNAME OUTPUT-FILE requires the installed library libNAME
! 781: -module build a library that can dlopened
! 782: -no-fast-install disable the fast-install mode
! 783: -no-install link a not-installable executable
! 784: -no-undefined declare that a library does not refer to external symbols
! 785: -o OUTPUT-FILE create OUTPUT-FILE from the specified objects
! 786: -objectlist FILE Use a list of object files found in FILE to specify objects
! 787: -precious-files-regex REGEX
! 788: don't remove output files matching REGEX
! 789: -release RELEASE specify package release information
! 790: -rpath LIBDIR the created library will eventually be installed in LIBDIR
! 791: -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries
! 792: -shared only do dynamic linking of libtool libraries
! 793: -shrext SUFFIX override the standard shared library file extension
! 794: -static do not do any dynamic linking of uninstalled libtool libraries
! 795: -static-libtool-libs
! 796: do not do any dynamic linking of libtool libraries
! 797: -version-info CURRENT[:REVISION[:AGE]]
! 798: specify library version info [each variable defaults to 0]
! 799: -weak LIBNAME declare that the target provides the LIBNAME interface
! 800:
! 801: All other options (arguments beginning with \`-') are ignored.
! 802:
! 803: Every other argument is treated as a filename. Files ending in \`.la' are
! 804: treated as uninstalled libtool libraries, other files are standard or library
! 805: object files.
! 806:
! 807: If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
! 808: only library objects (\`.lo' files) may be specified, and \`-rpath' is
! 809: required, except when creating a convenience library.
! 810:
! 811: If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
! 812: using \`ar' and \`ranlib', or on Windows using \`lib'.
! 813:
! 814: If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
! 815: is created, otherwise an executable program is created."
! 816: ;;
! 817:
! 818: uninstall)
! 819: $ECHO \
! 820: "Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
! 821:
! 822: Remove libraries from an installation directory.
! 823:
! 824: RM is the name of the program to use to delete files associated with each FILE
! 825: (typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
! 826: to RM.
! 827:
! 828: If FILE is a libtool library, all the files associated with it are deleted.
! 829: Otherwise, only FILE itself is deleted using RM."
! 830: ;;
! 831:
! 832: *)
! 833: func_fatal_help "invalid operation mode \`$mode'"
! 834: ;;
! 835: esac
! 836:
! 837: $ECHO
! 838: $ECHO "Try \`$progname --help' for more information about other modes."
! 839:
! 840: exit $?
! 841: }
! 842:
! 843: # Generated shell functions inserted here.
! 844:
! 845:
! 846: # Parse options once, thoroughly. This comes as soon as possible in
! 847: # the script to make things like `libtool --version' happen quickly.
! 848: {
! 849:
! 850: # Shorthand for --mode=foo, only valid as the first argument
! 851: case $1 in
! 852: clean|clea|cle|cl)
! 853: shift; set dummy --mode clean ${1+"$@"}; shift
! 854: ;;
! 855: compile|compil|compi|comp|com|co|c)
! 856: shift; set dummy --mode compile ${1+"$@"}; shift
! 857: ;;
! 858: execute|execut|execu|exec|exe|ex|e)
! 859: shift; set dummy --mode execute ${1+"$@"}; shift
! 860: ;;
! 861: finish|finis|fini|fin|fi|f)
! 862: shift; set dummy --mode finish ${1+"$@"}; shift
! 863: ;;
! 864: install|instal|insta|inst|ins|in|i)
! 865: shift; set dummy --mode install ${1+"$@"}; shift
! 866: ;;
! 867: link|lin|li|l)
! 868: shift; set dummy --mode link ${1+"$@"}; shift
! 869: ;;
! 870: uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
! 871: shift; set dummy --mode uninstall ${1+"$@"}; shift
! 872: ;;
! 873: esac
! 874:
! 875: # Parse non-mode specific arguments:
! 876: while test "$#" -gt 0; do
! 877: opt="$1"
! 878: shift
! 879:
! 880: case $opt in
! 881: --config) func_config ;;
! 882:
! 883: --debug) preserve_args="$preserve_args $opt"
! 884: func_echo "enabling shell trace mode"
! 885: opt_debug='set -x'
! 886: $opt_debug
! 887: ;;
! 888:
! 889: -dlopen) test "$#" -eq 0 && func_missing_arg "$opt" && break
! 890: execute_dlfiles="$execute_dlfiles $1"
! 891: shift
! 892: ;;
! 893:
! 894: --dry-run | -n) opt_dry_run=: ;;
! 895: --features) func_features ;;
! 896: --finish) mode="finish" ;;
! 897:
! 898: --mode) test "$#" -eq 0 && func_missing_arg "$opt" && break
! 899: case $1 in
! 900: # Valid mode arguments:
! 901: clean) ;;
! 902: compile) ;;
! 903: execute) ;;
! 904: finish) ;;
! 905: install) ;;
! 906: link) ;;
! 907: relink) ;;
! 908: uninstall) ;;
! 909:
! 910: # Catch anything else as an error
! 911: *) func_error "invalid argument for $opt"
! 912: exit_cmd=exit
! 913: break
! 914: ;;
! 915: esac
! 916:
! 917: mode="$1"
! 918: shift
! 919: ;;
! 920:
! 921: --preserve-dup-deps)
! 922: opt_duplicate_deps=: ;;
! 923:
! 924: --quiet|--silent) preserve_args="$preserve_args $opt"
! 925: opt_silent=:
! 926: ;;
! 927:
! 928: --verbose| -v) preserve_args="$preserve_args $opt"
! 929: opt_silent=false
! 930: ;;
! 931:
! 932: --tag) test "$#" -eq 0 && func_missing_arg "$opt" && break
! 933: preserve_args="$preserve_args $opt $1"
! 934: func_enable_tag "$1" # tagname is set here
! 935: shift
! 936: ;;
! 937:
! 938: # Separate optargs to long options:
! 939: -dlopen=*|--mode=*|--tag=*)
! 940: func_opt_split "$opt"
! 941: set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"}
! 942: shift
! 943: ;;
! 944:
! 945: -\?|-h) func_usage ;;
! 946: --help) opt_help=: ;;
! 947: --version) func_version ;;
! 948:
! 949: -*) func_fatal_help "unrecognized option \`$opt'" ;;
! 950:
! 951: *) nonopt="$opt"
! 952: break
! 953: ;;
! 954: esac
! 955: done
! 956:
! 957: # Now that we've collected a possible --mode arg, show help if necessary
! 958: $opt_help && func_mode_help
! 959:
! 960: case $host in
! 961: *cygwin* | *mingw* | *pw32*)
! 962: # don't eliminate duplications in $postdeps and $predeps
! 963: opt_duplicate_compiler_generated_deps=:
! 964: ;;
! 965: *)
! 966: opt_duplicate_compiler_generated_deps=$opt_duplicate_deps
! 967: ;;
! 968: esac
! 969:
! 970: # Having warned about all mis-specified options, bail out if
! 971: # anything was wrong.
! 972: $exit_cmd $EXIT_FAILURE
! 973: }
! 974:
! 975: # func_check_version_match
! 976: # Ensure that we are using m4 macros, and libtool script from the same
! 977: # release of libtool.
! 978: func_check_version_match ()
! 979: {
! 980: if test "$package_revision" != "$macro_revision"; then
! 981: if test "$VERSION" != "$macro_version"; then
! 982: if test -z "$macro_version"; then
! 983: cat >&2 <<_LT_EOF
! 984: $progname: Version mismatch error. This is $PACKAGE $VERSION, but the
! 985: $progname: definition of this LT_INIT comes from an older release.
! 986: $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
! 987: $progname: and run autoconf again.
! 988: _LT_EOF
! 989: else
! 990: cat >&2 <<_LT_EOF
! 991: $progname: Version mismatch error. This is $PACKAGE $VERSION, but the
! 992: $progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
! 993: $progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
! 994: $progname: and run autoconf again.
! 995: _LT_EOF
! 996: fi
! 997: else
! 998: cat >&2 <<_LT_EOF
! 999: $progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision,
! 1000: $progname: but the definition of this LT_INIT comes from revision $macro_revision.
! 1001: $progname: You should recreate aclocal.m4 with macros from revision $package_revision
! 1002: $progname: of $PACKAGE $VERSION and run autoconf again.
! 1003: _LT_EOF
! 1004: fi
! 1005:
! 1006: exit $EXIT_MISMATCH
! 1007: fi
! 1008: }
! 1009:
! 1010:
! 1011: ## ----------- ##
! 1012: ## Main. ##
! 1013: ## ----------- ##
! 1014:
! 1015: {
! 1016: # Sanity checks first:
! 1017: func_check_version_match
! 1018:
! 1019: if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
! 1020: func_fatal_configuration "not configured to build any kind of library"
! 1021: fi
! 1022:
! 1023: test -z "$mode" && func_fatal_error "error: you must specify a MODE."
! 1024:
! 1025:
! 1026: # Darwin sucks
! 1027: eval std_shrext=\"$shrext_cmds\"
! 1028:
! 1029:
! 1030: # Only execute mode is allowed to have -dlopen flags.
! 1031: if test -n "$execute_dlfiles" && test "$mode" != execute; then
! 1032: func_error "unrecognized option \`-dlopen'"
! 1033: $ECHO "$help" 1>&2
! 1034: exit $EXIT_FAILURE
! 1035: fi
! 1036:
! 1037: # Change the help message to a mode-specific one.
! 1038: generic_help="$help"
! 1039: help="Try \`$progname --help --mode=$mode' for more information."
! 1040: }
! 1041:
! 1042:
! 1043: # func_lalib_p file
! 1044: # True iff FILE is a libtool `.la' library or `.lo' object file.
! 1045: # This function is only a basic sanity check; it will hardly flush out
! 1046: # determined imposters.
! 1047: func_lalib_p ()
! 1048: {
! 1049: $SED -e 4q "$1" 2>/dev/null \
! 1050: | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
! 1051: }
! 1052:
! 1053: # func_lalib_unsafe_p file
! 1054: # True iff FILE is a libtool `.la' library or `.lo' object file.
! 1055: # This function implements the same check as func_lalib_p without
! 1056: # resorting to external programs. To this end, it redirects stdin and
! 1057: # closes it afterwards, without saving the original file descriptor.
! 1058: # As a safety measure, use it only where a negative result would be
! 1059: # fatal anyway. Works if `file' does not exist.
! 1060: func_lalib_unsafe_p ()
! 1061: {
! 1062: lalib_p=no
! 1063: if test -r "$1" && exec 5<&0 <"$1"; then
! 1064: for lalib_p_l in 1 2 3 4
! 1065: do
! 1066: read lalib_p_line
! 1067: case "$lalib_p_line" in
! 1068: \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
! 1069: esac
! 1070: done
! 1071: exec 0<&5 5<&-
! 1072: fi
! 1073: test "$lalib_p" = yes
! 1074: }
! 1075:
! 1076: # func_ltwrapper_script_p file
! 1077: # True iff FILE is a libtool wrapper script
! 1078: # This function is only a basic sanity check; it will hardly flush out
! 1079: # determined imposters.
! 1080: func_ltwrapper_script_p ()
! 1081: {
! 1082: func_lalib_p "$1"
! 1083: }
! 1084:
! 1085: # func_ltwrapper_executable_p file
! 1086: # True iff FILE is a libtool wrapper executable
! 1087: # This function is only a basic sanity check; it will hardly flush out
! 1088: # determined imposters.
! 1089: func_ltwrapper_executable_p ()
! 1090: {
! 1091: func_ltwrapper_exec_suffix=
! 1092: case $1 in
! 1093: *.exe) ;;
! 1094: *) func_ltwrapper_exec_suffix=.exe ;;
! 1095: esac
! 1096: $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1
! 1097: }
! 1098:
! 1099: # func_ltwrapper_scriptname file
! 1100: # Assumes file is an ltwrapper_executable
! 1101: # uses $file to determine the appropriate filename for a
! 1102: # temporary ltwrapper_script.
! 1103: func_ltwrapper_scriptname ()
! 1104: {
! 1105: func_ltwrapper_scriptname_result=""
! 1106: if func_ltwrapper_executable_p "$1"; then
! 1107: func_dirname_and_basename "$1" "" "."
! 1108: func_stripname '' '.exe' "$func_basename_result"
! 1109: func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
! 1110: fi
! 1111: }
! 1112:
! 1113: # func_ltwrapper_p file
! 1114: # True iff FILE is a libtool wrapper script or wrapper executable
! 1115: # This function is only a basic sanity check; it will hardly flush out
! 1116: # determined imposters.
! 1117: func_ltwrapper_p ()
! 1118: {
! 1119: func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"
! 1120: }
! 1121:
! 1122:
! 1123: # func_execute_cmds commands fail_cmd
! 1124: # Execute tilde-delimited COMMANDS.
! 1125: # If FAIL_CMD is given, eval that upon failure.
! 1126: # FAIL_CMD may read-access the current command in variable CMD!
! 1127: func_execute_cmds ()
! 1128: {
! 1129: $opt_debug
! 1130: save_ifs=$IFS; IFS='~'
! 1131: for cmd in $1; do
! 1132: IFS=$save_ifs
! 1133: eval cmd=\"$cmd\"
! 1134: func_show_eval "$cmd" "${2-:}"
! 1135: done
! 1136: IFS=$save_ifs
! 1137: }
! 1138:
! 1139:
! 1140: # func_source file
! 1141: # Source FILE, adding directory component if necessary.
! 1142: # Note that it is not necessary on cygwin/mingw to append a dot to
! 1143: # FILE even if both FILE and FILE.exe exist: automatic-append-.exe
! 1144: # behavior happens only for exec(3), not for open(2)! Also, sourcing
! 1145: # `FILE.' does not work on cygwin managed mounts.
! 1146: func_source ()
! 1147: {
! 1148: $opt_debug
! 1149: case $1 in
! 1150: */* | *\\*) . "$1" ;;
! 1151: *) . "./$1" ;;
! 1152: esac
! 1153: }
! 1154:
! 1155:
! 1156: # func_win32_libid arg
! 1157: # return the library type of file 'arg'
! 1158: #
! 1159: # Need a lot of goo to handle *both* DLLs and import libs
! 1160: # Has to be a shell function in order to 'eat' the argument
! 1161: # that is supplied when $file_magic_command is called.
! 1162: func_win32_libid ()
! 1163: {
! 1164: $opt_debug
! 1165: win32_libid_type="unknown"
! 1166: win32_fileres=`file -L $1 2>/dev/null`
! 1167: case $win32_fileres in
! 1168: *ar\ archive\ import\ library*) # definitely import
! 1169: win32_libid_type="x86 archive import"
! 1170: ;;
! 1171: *ar\ archive*) # could be an import, or static
! 1172: if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
! 1173: $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
! 1174: win32_nmres=`eval $NM -f posix -A $1 |
! 1175: $SED -n -e '
! 1176: 1,100{
! 1177: / I /{
! 1178: s,.*,import,
! 1179: p
! 1180: q
! 1181: }
! 1182: }'`
! 1183: case $win32_nmres in
! 1184: import*) win32_libid_type="x86 archive import";;
! 1185: *) win32_libid_type="x86 archive static";;
! 1186: esac
! 1187: fi
! 1188: ;;
! 1189: *DLL*)
! 1190: win32_libid_type="x86 DLL"
! 1191: ;;
! 1192: *executable*) # but shell scripts are "executable" too...
! 1193: case $win32_fileres in
! 1194: *MS\ Windows\ PE\ Intel*)
! 1195: win32_libid_type="x86 DLL"
! 1196: ;;
! 1197: esac
! 1198: ;;
! 1199: esac
! 1200: $ECHO "$win32_libid_type"
! 1201: }
! 1202:
! 1203:
! 1204:
! 1205: # func_infer_tag arg
! 1206: # Infer tagged configuration to use if any are available and
! 1207: # if one wasn't chosen via the "--tag" command line option.
! 1208: # Only attempt this if the compiler in the base compile
! 1209: # command doesn't match the default compiler.
! 1210: # arg is usually of the form 'gcc ...'
! 1211: func_infer_tag ()
! 1212: {
! 1213: $opt_debug
! 1214: if test -n "$available_tags" && test -z "$tagname"; then
! 1215: CC_quoted=
! 1216: for arg in $CC; do
! 1217: func_quote_for_eval "$arg"
! 1218: CC_quoted="$CC_quoted $func_quote_for_eval_result"
! 1219: done
! 1220: case $@ in
! 1221: # Blanks in the command may have been stripped by the calling shell,
! 1222: # but not from the CC environment variable when configure was run.
! 1223: " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ;;
! 1224: # Blanks at the start of $base_compile will cause this to fail
! 1225: # if we don't check for them as well.
! 1226: *)
! 1227: for z in $available_tags; do
! 1228: if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
! 1229: # Evaluate the configuration.
! 1230: eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
! 1231: CC_quoted=
! 1232: for arg in $CC; do
! 1233: # Double-quote args containing other shell metacharacters.
! 1234: func_quote_for_eval "$arg"
! 1235: CC_quoted="$CC_quoted $func_quote_for_eval_result"
! 1236: done
! 1237: case "$@ " in
! 1238: " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*)
! 1239: # The compiler in the base compile command matches
! 1240: # the one in the tagged configuration.
! 1241: # Assume this is the tagged configuration we want.
! 1242: tagname=$z
! 1243: break
! 1244: ;;
! 1245: esac
! 1246: fi
! 1247: done
! 1248: # If $tagname still isn't set, then no tagged configuration
! 1249: # was found and let the user know that the "--tag" command
! 1250: # line option must be used.
! 1251: if test -z "$tagname"; then
! 1252: func_echo "unable to infer tagged configuration"
! 1253: func_fatal_error "specify a tag with \`--tag'"
! 1254: # else
! 1255: # func_verbose "using $tagname tagged configuration"
! 1256: fi
! 1257: ;;
! 1258: esac
! 1259: fi
! 1260: }
! 1261:
! 1262:
! 1263:
! 1264: # func_generate_dlsyms outputname originator pic_p
! 1265: # Extract symbols from dlprefiles and create ${outputname}S.o with
! 1266: # a dlpreopen symbol table.
! 1267: func_generate_dlsyms ()
! 1268: {
! 1269: $opt_debug
! 1270: my_outputname="$1"
! 1271: my_originator="$2"
! 1272: my_pic_p="${3-no}"
! 1273: my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
! 1274: my_dlsyms=
! 1275:
! 1276: if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
! 1277: if test -n "$NM" && test -n "$global_symbol_pipe"; then
! 1278: my_dlsyms="${my_outputname}S.c"
! 1279: else
! 1280: func_error "not configured to extract global symbols from dlpreopened files"
! 1281: fi
! 1282: fi
! 1283:
! 1284: if test -n "$my_dlsyms"; then
! 1285: case $my_dlsyms in
! 1286: "") ;;
! 1287: *.c)
! 1288: # Discover the nlist of each of the dlfiles.
! 1289: nlist="$output_objdir/${my_outputname}.nm"
! 1290:
! 1291: func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
! 1292:
! 1293: # Parse the name list into a source file.
! 1294: func_verbose "creating $output_objdir/$my_dlsyms"
! 1295:
! 1296: $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
! 1297: /* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
! 1298: /* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
! 1299:
! 1300: #ifdef __cplusplus
! 1301: extern \"C\" {
! 1302: #endif
! 1303:
! 1304: /* External symbol declarations for the compiler. */\
! 1305: "
! 1306:
! 1307: if test "$dlself" = yes; then
! 1308: func_verbose "generating symbol list for \`$output'"
! 1309:
! 1310: $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
! 1311:
! 1312: # Add our own program objects to the symbol list.
! 1313: progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
! 1314: for progfile in $progfiles; do
! 1315: func_verbose "extracting global C symbols from \`$progfile'"
! 1316: $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'"
! 1317: done
! 1318:
! 1319: if test -n "$exclude_expsyms"; then
! 1320: $opt_dry_run || {
! 1321: eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
! 1322: eval '$MV "$nlist"T "$nlist"'
! 1323: }
! 1324: fi
! 1325:
! 1326: if test -n "$export_symbols_regex"; then
! 1327: $opt_dry_run || {
! 1328: eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
! 1329: eval '$MV "$nlist"T "$nlist"'
! 1330: }
! 1331: fi
! 1332:
! 1333: # Prepare the list of exported symbols
! 1334: if test -z "$export_symbols"; then
! 1335: export_symbols="$output_objdir/$outputname.exp"
! 1336: $opt_dry_run || {
! 1337: $RM $export_symbols
! 1338: eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
! 1339: case $host in
! 1340: *cygwin* | *mingw* )
! 1341: eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
! 1342: eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
! 1343: ;;
! 1344: esac
! 1345: }
! 1346: else
! 1347: $opt_dry_run || {
! 1348: eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
! 1349: eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
! 1350: eval '$MV "$nlist"T "$nlist"'
! 1351: case $host in
! 1352: *cygwin | *mingw* )
! 1353: eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
! 1354: eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
! 1355: ;;
! 1356: esac
! 1357: }
! 1358: fi
! 1359: fi
! 1360:
! 1361: for dlprefile in $dlprefiles; do
! 1362: func_verbose "extracting global C symbols from \`$dlprefile'"
! 1363: func_basename "$dlprefile"
! 1364: name="$func_basename_result"
! 1365: $opt_dry_run || {
! 1366: eval '$ECHO ": $name " >> "$nlist"'
! 1367: eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'"
! 1368: }
! 1369: done
! 1370:
! 1371: $opt_dry_run || {
! 1372: # Make sure we have at least an empty file.
! 1373: test -f "$nlist" || : > "$nlist"
! 1374:
! 1375: if test -n "$exclude_expsyms"; then
! 1376: $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
! 1377: $MV "$nlist"T "$nlist"
! 1378: fi
! 1379:
! 1380: # Try sorting and uniquifying the output.
! 1381: if $GREP -v "^: " < "$nlist" |
! 1382: if sort -k 3 </dev/null >/dev/null 2>&1; then
! 1383: sort -k 3
! 1384: else
! 1385: sort +2
! 1386: fi |
! 1387: uniq > "$nlist"S; then
! 1388: :
! 1389: else
! 1390: $GREP -v "^: " < "$nlist" > "$nlist"S
! 1391: fi
! 1392:
! 1393: if test -f "$nlist"S; then
! 1394: eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
! 1395: else
! 1396: $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms"
! 1397: fi
! 1398:
! 1399: $ECHO >> "$output_objdir/$my_dlsyms" "\
! 1400:
! 1401: /* The mapping between symbol names and symbols. */
! 1402: typedef struct {
! 1403: const char *name;
! 1404: void *address;
! 1405: } lt_dlsymlist;
! 1406: "
! 1407: case $host in
! 1408: *cygwin* | *mingw* )
! 1409: $ECHO >> "$output_objdir/$my_dlsyms" "\
! 1410: /* DATA imports from DLLs on WIN32 con't be const, because
! 1411: runtime relocations are performed -- see ld's documentation
! 1412: on pseudo-relocs. */"
! 1413: lt_dlsym_const= ;;
! 1414: *osf5*)
! 1415: echo >> "$output_objdir/$my_dlsyms" "\
! 1416: /* This system does not cope well with relocations in const data */"
! 1417: lt_dlsym_const= ;;
! 1418: *)
! 1419: lt_dlsym_const=const ;;
! 1420: esac
! 1421:
! 1422: $ECHO >> "$output_objdir/$my_dlsyms" "\
! 1423: extern $lt_dlsym_const lt_dlsymlist
! 1424: lt_${my_prefix}_LTX_preloaded_symbols[];
! 1425: $lt_dlsym_const lt_dlsymlist
! 1426: lt_${my_prefix}_LTX_preloaded_symbols[] =
! 1427: {\
! 1428: { \"$my_originator\", (void *) 0 },"
! 1429:
! 1430: case $need_lib_prefix in
! 1431: no)
! 1432: eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
! 1433: ;;
! 1434: *)
! 1435: eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
! 1436: ;;
! 1437: esac
! 1438: $ECHO >> "$output_objdir/$my_dlsyms" "\
! 1439: {0, (void *) 0}
! 1440: };
! 1441:
! 1442: /* This works around a problem in FreeBSD linker */
! 1443: #ifdef FREEBSD_WORKAROUND
! 1444: static const void *lt_preloaded_setup() {
! 1445: return lt_${my_prefix}_LTX_preloaded_symbols;
! 1446: }
! 1447: #endif
! 1448:
! 1449: #ifdef __cplusplus
! 1450: }
! 1451: #endif\
! 1452: "
! 1453: } # !$opt_dry_run
! 1454:
! 1455: pic_flag_for_symtable=
! 1456: case "$compile_command " in
! 1457: *" -static "*) ;;
! 1458: *)
! 1459: case $host in
! 1460: # compiling the symbol table file with pic_flag works around
! 1461: # a FreeBSD bug that causes programs to crash when -lm is
! 1462: # linked before any other PIC object. But we must not use
! 1463: # pic_flag when linking with -static. The problem exists in
! 1464: # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
! 1465: *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
! 1466: pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
! 1467: *-*-hpux*)
! 1468: pic_flag_for_symtable=" $pic_flag" ;;
! 1469: *)
! 1470: if test "X$my_pic_p" != Xno; then
! 1471: pic_flag_for_symtable=" $pic_flag"
! 1472: fi
! 1473: ;;
! 1474: esac
! 1475: ;;
! 1476: esac
! 1477: symtab_cflags=
! 1478: for arg in $LTCFLAGS; do
! 1479: case $arg in
! 1480: -pie | -fpie | -fPIE) ;;
! 1481: *) symtab_cflags="$symtab_cflags $arg" ;;
! 1482: esac
! 1483: done
! 1484:
! 1485: # Now compile the dynamic symbol file.
! 1486: func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
! 1487:
! 1488: # Clean up the generated files.
! 1489: func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
! 1490:
! 1491: # Transform the symbol file into the correct name.
! 1492: symfileobj="$output_objdir/${my_outputname}S.$objext"
! 1493: case $host in
! 1494: *cygwin* | *mingw* )
! 1495: if test -f "$output_objdir/$my_outputname.def"; then
! 1496: compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
! 1497: finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
! 1498: else
! 1499: compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
! 1500: finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
! 1501: fi
! 1502: ;;
! 1503: *)
! 1504: compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
! 1505: finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
! 1506: ;;
! 1507: esac
! 1508: ;;
! 1509: *)
! 1510: func_fatal_error "unknown suffix for \`$my_dlsyms'"
! 1511: ;;
! 1512: esac
! 1513: else
! 1514: # We keep going just in case the user didn't refer to
! 1515: # lt_preloaded_symbols. The linker will fail if global_symbol_pipe
! 1516: # really was required.
! 1517:
! 1518: # Nullify the symbol file.
! 1519: compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
! 1520: finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
! 1521: fi
! 1522: }
! 1523:
! 1524: # func_extract_an_archive dir oldlib
! 1525: func_extract_an_archive ()
! 1526: {
! 1527: $opt_debug
! 1528: f_ex_an_ar_dir="$1"; shift
! 1529: f_ex_an_ar_oldlib="$1"
! 1530: func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" 'exit $?'
! 1531: if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
! 1532: :
! 1533: else
! 1534: func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
! 1535: fi
! 1536: }
! 1537:
! 1538:
! 1539: # func_extract_archives gentop oldlib ...
! 1540: func_extract_archives ()
! 1541: {
! 1542: $opt_debug
! 1543: my_gentop="$1"; shift
! 1544: my_oldlibs=${1+"$@"}
! 1545: my_oldobjs=""
! 1546: my_xlib=""
! 1547: my_xabs=""
! 1548: my_xdir=""
! 1549:
! 1550: for my_xlib in $my_oldlibs; do
! 1551: # Extract the objects.
! 1552: case $my_xlib in
! 1553: [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
! 1554: *) my_xabs=`pwd`"/$my_xlib" ;;
! 1555: esac
! 1556: func_basename "$my_xlib"
! 1557: my_xlib="$func_basename_result"
! 1558: my_xlib_u=$my_xlib
! 1559: while :; do
! 1560: case " $extracted_archives " in
! 1561: *" $my_xlib_u "*)
! 1562: extracted_serial=`expr $extracted_serial + 1`
! 1563: my_xlib_u=lt$extracted_serial-$my_xlib ;;
! 1564: *) break ;;
! 1565: esac
! 1566: done
! 1567: extracted_archives="$extracted_archives $my_xlib_u"
! 1568: my_xdir="$my_gentop/$my_xlib_u"
! 1569:
! 1570: func_mkdir_p "$my_xdir"
! 1571:
! 1572: case $host in
! 1573: *-darwin*)
! 1574: func_verbose "Extracting $my_xabs"
! 1575: # Do not bother doing anything if just a dry run
! 1576: $opt_dry_run || {
! 1577: darwin_orig_dir=`pwd`
! 1578: cd $my_xdir || exit $?
! 1579: darwin_archive=$my_xabs
! 1580: darwin_curdir=`pwd`
! 1581: darwin_base_archive=`basename "$darwin_archive"`
! 1582: darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
! 1583: if test -n "$darwin_arches"; then
! 1584: darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
! 1585: darwin_arch=
! 1586: func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
! 1587: for darwin_arch in $darwin_arches ; do
! 1588: func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
! 1589: lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
! 1590: cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
! 1591: func_extract_an_archive "`pwd`" "${darwin_base_archive}"
! 1592: cd "$darwin_curdir"
! 1593: $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
! 1594: done # $darwin_arches
! 1595: ## Okay now we've a bunch of thin objects, gotta fatten them up :)
! 1596: darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP`
! 1597: darwin_file=
! 1598: darwin_files=
! 1599: for darwin_file in $darwin_filelist; do
! 1600: darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
! 1601: lipo -create -output "$darwin_file" $darwin_files
! 1602: done # $darwin_filelist
! 1603: $RM -rf unfat-$$
! 1604: cd "$darwin_orig_dir"
! 1605: else
! 1606: cd $darwin_orig_dir
! 1607: func_extract_an_archive "$my_xdir" "$my_xabs"
! 1608: fi # $darwin_arches
! 1609: } # !$opt_dry_run
! 1610: ;;
! 1611: *)
! 1612: func_extract_an_archive "$my_xdir" "$my_xabs"
! 1613: ;;
! 1614: esac
! 1615: my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
! 1616: done
! 1617:
! 1618: func_extract_archives_result="$my_oldobjs"
! 1619: }
! 1620:
! 1621:
! 1622:
! 1623: # func_write_libtool_object output_name pic_name nonpic_name
! 1624: # Create a libtool object file (analogous to a ".la" file),
! 1625: # but don't create it if we're doing a dry run.
! 1626: func_write_libtool_object ()
! 1627: {
! 1628: write_libobj=${1}
! 1629: if test "$build_libtool_libs" = yes; then
! 1630: write_lobj=\'${2}\'
! 1631: else
! 1632: write_lobj=none
! 1633: fi
! 1634:
! 1635: if test "$build_old_libs" = yes; then
! 1636: write_oldobj=\'${3}\'
! 1637: else
! 1638: write_oldobj=none
! 1639: fi
! 1640:
! 1641: $opt_dry_run || {
! 1642: cat >${write_libobj}T <<EOF
! 1643: # $write_libobj - a libtool object file
! 1644: # Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
! 1645: #
! 1646: # Please DO NOT delete this file!
! 1647: # It is necessary for linking the library.
! 1648:
! 1649: # Name of the PIC object.
! 1650: pic_object=$write_lobj
! 1651:
! 1652: # Name of the non-PIC object
! 1653: non_pic_object=$write_oldobj
! 1654:
! 1655: EOF
! 1656: mv -f "${write_libobj}T" "${write_libobj}"
! 1657: }
! 1658: }
! 1659:
! 1660: # func_mode_compile arg...
! 1661: func_mode_compile ()
! 1662: {
! 1663: $opt_debug
! 1664: # Get the compilation command and the source file.
! 1665: base_compile=
! 1666: srcfile="$nonopt" # always keep a non-empty value in "srcfile"
! 1667: suppress_opt=yes
! 1668: suppress_output=
! 1669: arg_mode=normal
! 1670: libobj=
! 1671: later=
! 1672: pie_flag=
! 1673:
! 1674: for arg
! 1675: do
! 1676: case $arg_mode in
! 1677: arg )
! 1678: # do not "continue". Instead, add this to base_compile
! 1679: lastarg="$arg"
! 1680: arg_mode=normal
! 1681: ;;
! 1682:
! 1683: target )
! 1684: libobj="$arg"
! 1685: arg_mode=normal
! 1686: continue
! 1687: ;;
! 1688:
! 1689: normal )
! 1690: # Accept any command-line options.
! 1691: case $arg in
! 1692: -o)
! 1693: test -n "$libobj" && \
! 1694: func_fatal_error "you cannot specify \`-o' more than once"
! 1695: arg_mode=target
! 1696: continue
! 1697: ;;
! 1698:
! 1699: -pie | -fpie | -fPIE)
! 1700: pie_flag="$pie_flag $arg"
! 1701: continue
! 1702: ;;
! 1703:
! 1704: -shared | -static | -prefer-pic | -prefer-non-pic)
! 1705: later="$later $arg"
! 1706: continue
! 1707: ;;
! 1708:
! 1709: -no-suppress)
! 1710: suppress_opt=no
! 1711: continue
! 1712: ;;
! 1713:
! 1714: -Xcompiler)
! 1715: arg_mode=arg # the next one goes into the "base_compile" arg list
! 1716: continue # The current "srcfile" will either be retained or
! 1717: ;; # replaced later. I would guess that would be a bug.
! 1718:
! 1719: -Wc,*)
! 1720: func_stripname '-Wc,' '' "$arg"
! 1721: args=$func_stripname_result
! 1722: lastarg=
! 1723: save_ifs="$IFS"; IFS=','
! 1724: for arg in $args; do
! 1725: IFS="$save_ifs"
! 1726: func_quote_for_eval "$arg"
! 1727: lastarg="$lastarg $func_quote_for_eval_result"
! 1728: done
! 1729: IFS="$save_ifs"
! 1730: func_stripname ' ' '' "$lastarg"
! 1731: lastarg=$func_stripname_result
! 1732:
! 1733: # Add the arguments to base_compile.
! 1734: base_compile="$base_compile $lastarg"
! 1735: continue
! 1736: ;;
! 1737:
! 1738: *)
! 1739: # Accept the current argument as the source file.
! 1740: # The previous "srcfile" becomes the current argument.
! 1741: #
! 1742: lastarg="$srcfile"
! 1743: srcfile="$arg"
! 1744: ;;
! 1745: esac # case $arg
! 1746: ;;
! 1747: esac # case $arg_mode
! 1748:
! 1749: # Aesthetically quote the previous argument.
! 1750: func_quote_for_eval "$lastarg"
! 1751: base_compile="$base_compile $func_quote_for_eval_result"
! 1752: done # for arg
! 1753:
! 1754: case $arg_mode in
! 1755: arg)
! 1756: func_fatal_error "you must specify an argument for -Xcompile"
! 1757: ;;
! 1758: target)
! 1759: func_fatal_error "you must specify a target with \`-o'"
! 1760: ;;
! 1761: *)
! 1762: # Get the name of the library object.
! 1763: test -z "$libobj" && {
! 1764: func_basename "$srcfile"
! 1765: libobj="$func_basename_result"
! 1766: }
! 1767: ;;
! 1768: esac
! 1769:
! 1770: # Recognize several different file suffixes.
! 1771: # If the user specifies -o file.o, it is replaced with file.lo
! 1772: xform='[cCFSifmso]'
! 1773: case $libobj in
! 1774: *.ada) xform=ada ;;
! 1775: *.adb) xform=adb ;;
! 1776: *.ads) xform=ads ;;
! 1777: *.asm) xform=asm ;;
! 1778: *.c++) xform=c++ ;;
! 1779: *.cc) xform=cc ;;
! 1780: *.ii) xform=ii ;;
! 1781: *.class) xform=class ;;
! 1782: *.cpp) xform=cpp ;;
! 1783: *.cxx) xform=cxx ;;
! 1784: *.[fF][09]?) xform='[fF][09].' ;;
! 1785: *.for) xform=for ;;
! 1786: *.java) xform=java ;;
! 1787: *.obj) xform=obj ;;
! 1788: *.sx) xform=sx ;;
! 1789: esac
! 1790:
! 1791: libobj=`$ECHO "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
! 1792:
! 1793: case $libobj in
! 1794: *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
! 1795: *)
! 1796: func_fatal_error "cannot determine name of library object from \`$libobj'"
! 1797: ;;
! 1798: esac
! 1799:
! 1800: func_infer_tag $base_compile
! 1801:
! 1802: for arg in $later; do
! 1803: case $arg in
! 1804: -shared)
! 1805: test "$build_libtool_libs" != yes && \
! 1806: func_fatal_configuration "can not build a shared library"
! 1807: build_old_libs=no
! 1808: continue
! 1809: ;;
! 1810:
! 1811: -static)
! 1812: build_libtool_libs=no
! 1813: build_old_libs=yes
! 1814: continue
! 1815: ;;
! 1816:
! 1817: -prefer-pic)
! 1818: pic_mode=yes
! 1819: continue
! 1820: ;;
! 1821:
! 1822: -prefer-non-pic)
! 1823: pic_mode=no
! 1824: continue
! 1825: ;;
! 1826: esac
! 1827: done
! 1828:
! 1829: func_quote_for_eval "$libobj"
! 1830: test "X$libobj" != "X$func_quote_for_eval_result" \
! 1831: && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \
! 1832: && func_warning "libobj name \`$libobj' may not contain shell special characters."
! 1833: func_dirname_and_basename "$obj" "/" ""
! 1834: objname="$func_basename_result"
! 1835: xdir="$func_dirname_result"
! 1836: lobj=${xdir}$objdir/$objname
! 1837:
! 1838: test -z "$base_compile" && \
! 1839: func_fatal_help "you must specify a compilation command"
! 1840:
! 1841: # Delete any leftover library objects.
! 1842: if test "$build_old_libs" = yes; then
! 1843: removelist="$obj $lobj $libobj ${libobj}T"
! 1844: else
! 1845: removelist="$lobj $libobj ${libobj}T"
! 1846: fi
! 1847:
! 1848: $opt_dry_run || $RM $removelist
! 1849: trap "$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE" 1 2 15
! 1850:
! 1851: # On Cygwin there's no "real" PIC flag so we must build both object types
! 1852: case $host_os in
! 1853: cygwin* | mingw* | pw32* | os2*)
! 1854: pic_mode=default
! 1855: ;;
! 1856: esac
! 1857: if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
! 1858: # non-PIC code in shared libraries is not supported
! 1859: pic_mode=default
! 1860: fi
! 1861:
! 1862: # Calculate the filename of the output object if compiler does
! 1863: # not support -o with -c
! 1864: if test "$compiler_c_o" = no; then
! 1865: output_obj=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
! 1866: lockfile="$output_obj.lock"
! 1867: removelist="$removelist $output_obj $lockfile"
! 1868: trap "$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE" 1 2 15
! 1869: else
! 1870: output_obj=
! 1871: need_locks=no
! 1872: lockfile=
! 1873: fi
! 1874:
! 1875: # Lock this critical section if it is needed
! 1876: # We use this script file to make the link, it avoids creating a new file
! 1877: if test "$need_locks" = yes; then
! 1878: until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
! 1879: func_echo "Waiting for $lockfile to be removed"
! 1880: sleep 2
! 1881: done
! 1882: elif test "$need_locks" = warn; then
! 1883: if test -f "$lockfile"; then
! 1884: $ECHO "\
! 1885: *** ERROR, $lockfile exists and contains:
! 1886: `cat $lockfile 2>/dev/null`
! 1887:
! 1888: This indicates that another process is trying to use the same
! 1889: temporary object file, and libtool could not work around it because
! 1890: your compiler does not support \`-c' and \`-o' together. If you
! 1891: repeat this compilation, it may succeed, by chance, but you had better
! 1892: avoid parallel builds (make -j) in this platform, or get a better
! 1893: compiler."
! 1894:
! 1895: $opt_dry_run || $RM $removelist
! 1896: exit $EXIT_FAILURE
! 1897: fi
! 1898: $ECHO "$srcfile" > "$lockfile"
! 1899: fi
! 1900:
! 1901: if test -n "$fix_srcfile_path"; then
! 1902: eval srcfile=\"$fix_srcfile_path\"
! 1903: fi
! 1904: func_quote_for_eval "$srcfile"
! 1905: qsrcfile=$func_quote_for_eval_result
! 1906:
! 1907: $opt_dry_run || $RM "$libobj" "${libobj}T"
! 1908:
! 1909: # Only build a PIC object if we are building libtool libraries.
! 1910: if test "$build_libtool_libs" = yes; then
! 1911: # Without this assignment, base_compile gets emptied.
! 1912: fbsd_hideous_sh_bug=$base_compile
! 1913:
! 1914: if test "$pic_mode" != no; then
! 1915: command="$base_compile $qsrcfile $pic_flag"
! 1916: else
! 1917: # Don't build PIC code
! 1918: command="$base_compile $qsrcfile"
! 1919: fi
! 1920:
! 1921: func_mkdir_p "$xdir$objdir"
! 1922:
! 1923: if test -z "$output_obj"; then
! 1924: # Place PIC objects in $objdir
! 1925: command="$command -o $lobj"
! 1926: fi
! 1927:
! 1928: $opt_dry_run || $RM "$lobj" "$output_obj"
! 1929:
! 1930: func_show_eval_locale "$command" \
! 1931: 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
! 1932:
! 1933: if test "$need_locks" = warn &&
! 1934: test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
! 1935: $ECHO "\
! 1936: *** ERROR, $lockfile contains:
! 1937: `cat $lockfile 2>/dev/null`
! 1938:
! 1939: but it should contain:
! 1940: $srcfile
! 1941:
! 1942: This indicates that another process is trying to use the same
! 1943: temporary object file, and libtool could not work around it because
! 1944: your compiler does not support \`-c' and \`-o' together. If you
! 1945: repeat this compilation, it may succeed, by chance, but you had better
! 1946: avoid parallel builds (make -j) in this platform, or get a better
! 1947: compiler."
! 1948:
! 1949: $opt_dry_run || $RM $removelist
! 1950: exit $EXIT_FAILURE
! 1951: fi
! 1952:
! 1953: # Just move the object if needed, then go on to compile the next one
! 1954: if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
! 1955: func_show_eval '$MV "$output_obj" "$lobj"' \
! 1956: 'error=$?; $opt_dry_run || $RM $removelist; exit $error'
! 1957: fi
! 1958:
! 1959: # Allow error messages only from the first compilation.
! 1960: if test "$suppress_opt" = yes; then
! 1961: suppress_output=' >/dev/null 2>&1'
! 1962: fi
! 1963: fi
! 1964:
! 1965: # Only build a position-dependent object if we build old libraries.
! 1966: if test "$build_old_libs" = yes; then
! 1967: if test "$pic_mode" != yes; then
! 1968: # Don't build PIC code
! 1969: command="$base_compile $qsrcfile$pie_flag"
! 1970: else
! 1971: command="$base_compile $qsrcfile $pic_flag"
! 1972: fi
! 1973: if test "$compiler_c_o" = yes; then
! 1974: command="$command -o $obj"
! 1975: fi
! 1976:
! 1977: # Suppress compiler output if we already did a PIC compilation.
! 1978: command="$command$suppress_output"
! 1979: $opt_dry_run || $RM "$obj" "$output_obj"
! 1980: func_show_eval_locale "$command" \
! 1981: '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
! 1982:
! 1983: if test "$need_locks" = warn &&
! 1984: test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
! 1985: $ECHO "\
! 1986: *** ERROR, $lockfile contains:
! 1987: `cat $lockfile 2>/dev/null`
! 1988:
! 1989: but it should contain:
! 1990: $srcfile
! 1991:
! 1992: This indicates that another process is trying to use the same
! 1993: temporary object file, and libtool could not work around it because
! 1994: your compiler does not support \`-c' and \`-o' together. If you
! 1995: repeat this compilation, it may succeed, by chance, but you had better
! 1996: avoid parallel builds (make -j) in this platform, or get a better
! 1997: compiler."
! 1998:
! 1999: $opt_dry_run || $RM $removelist
! 2000: exit $EXIT_FAILURE
! 2001: fi
! 2002:
! 2003: # Just move the object if needed
! 2004: if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
! 2005: func_show_eval '$MV "$output_obj" "$obj"' \
! 2006: 'error=$?; $opt_dry_run || $RM $removelist; exit $error'
! 2007: fi
! 2008: fi
! 2009:
! 2010: $opt_dry_run || {
! 2011: func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
! 2012:
! 2013: # Unlock the critical section if it was locked
! 2014: if test "$need_locks" != no; then
! 2015: $RM "$lockfile"
! 2016: fi
! 2017: }
! 2018:
! 2019: exit $EXIT_SUCCESS
! 2020: }
! 2021:
! 2022: test "$mode" = compile && func_mode_compile ${1+"$@"}
! 2023:
! 2024:
! 2025: # func_mode_execute arg...
! 2026: func_mode_execute ()
! 2027: {
! 2028: $opt_debug
! 2029: # The first argument is the command name.
! 2030: cmd="$nonopt"
! 2031: test -z "$cmd" && \
! 2032: func_fatal_help "you must specify a COMMAND"
! 2033:
! 2034: # Handle -dlopen flags immediately.
! 2035: for file in $execute_dlfiles; do
! 2036: test -f "$file" \
! 2037: || func_fatal_help "\`$file' is not a file"
! 2038:
! 2039: dir=
! 2040: case $file in
! 2041: *.la)
! 2042: # Check to see that this really is a libtool archive.
! 2043: func_lalib_unsafe_p "$file" \
! 2044: || func_fatal_help "\`$lib' is not a valid libtool archive"
! 2045:
! 2046: # Read the libtool library.
! 2047: dlname=
! 2048: library_names=
! 2049: func_source "$file"
! 2050:
! 2051: # Skip this library if it cannot be dlopened.
! 2052: if test -z "$dlname"; then
! 2053: # Warn if it was a shared library.
! 2054: test -n "$library_names" && \
! 2055: func_warning "\`$file' was not linked with \`-export-dynamic'"
! 2056: continue
! 2057: fi
! 2058:
! 2059: func_dirname "$file" "" "."
! 2060: dir="$func_dirname_result"
! 2061:
! 2062: if test -f "$dir/$objdir/$dlname"; then
! 2063: dir="$dir/$objdir"
! 2064: else
! 2065: if test ! -f "$dir/$dlname"; then
! 2066: func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
! 2067: fi
! 2068: fi
! 2069: ;;
! 2070:
! 2071: *.lo)
! 2072: # Just add the directory containing the .lo file.
! 2073: func_dirname "$file" "" "."
! 2074: dir="$func_dirname_result"
! 2075: ;;
! 2076:
! 2077: *)
! 2078: func_warning "\`-dlopen' is ignored for non-libtool libraries and objects"
! 2079: continue
! 2080: ;;
! 2081: esac
! 2082:
! 2083: # Get the absolute pathname.
! 2084: absdir=`cd "$dir" && pwd`
! 2085: test -n "$absdir" && dir="$absdir"
! 2086:
! 2087: # Now add the directory to shlibpath_var.
! 2088: if eval "test -z \"\$$shlibpath_var\""; then
! 2089: eval "$shlibpath_var=\"\$dir\""
! 2090: else
! 2091: eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
! 2092: fi
! 2093: done
! 2094:
! 2095: # This variable tells wrapper scripts just to set shlibpath_var
! 2096: # rather than running their programs.
! 2097: libtool_execute_magic="$magic"
! 2098:
! 2099: # Check if any of the arguments is a wrapper script.
! 2100: args=
! 2101: for file
! 2102: do
! 2103: case $file in
! 2104: -*) ;;
! 2105: *)
! 2106: # Do a test to see if this is really a libtool program.
! 2107: if func_ltwrapper_script_p "$file"; then
! 2108: func_source "$file"
! 2109: # Transform arg to wrapped name.
! 2110: file="$progdir/$program"
! 2111: elif func_ltwrapper_executable_p "$file"; then
! 2112: func_ltwrapper_scriptname "$file"
! 2113: func_source "$func_ltwrapper_scriptname_result"
! 2114: # Transform arg to wrapped name.
! 2115: file="$progdir/$program"
! 2116: fi
! 2117: ;;
! 2118: esac
! 2119: # Quote arguments (to preserve shell metacharacters).
! 2120: func_quote_for_eval "$file"
! 2121: args="$args $func_quote_for_eval_result"
! 2122: done
! 2123:
! 2124: if test "X$opt_dry_run" = Xfalse; then
! 2125: if test -n "$shlibpath_var"; then
! 2126: # Export the shlibpath_var.
! 2127: eval "export $shlibpath_var"
! 2128: fi
! 2129:
! 2130: # Restore saved environment variables
! 2131: for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
! 2132: do
! 2133: eval "if test \"\${save_$lt_var+set}\" = set; then
! 2134: $lt_var=\$save_$lt_var; export $lt_var
! 2135: else
! 2136: $lt_unset $lt_var
! 2137: fi"
! 2138: done
! 2139:
! 2140: # Now prepare to actually exec the command.
! 2141: exec_cmd="\$cmd$args"
! 2142: else
! 2143: # Display what would be done.
! 2144: if test -n "$shlibpath_var"; then
! 2145: eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
! 2146: $ECHO "export $shlibpath_var"
! 2147: fi
! 2148: $ECHO "$cmd$args"
! 2149: exit $EXIT_SUCCESS
! 2150: fi
! 2151: }
! 2152:
! 2153: test "$mode" = execute && func_mode_execute ${1+"$@"}
! 2154:
! 2155:
! 2156: # func_mode_finish arg...
! 2157: func_mode_finish ()
! 2158: {
! 2159: $opt_debug
! 2160: libdirs="$nonopt"
! 2161: admincmds=
! 2162:
! 2163: if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
! 2164: for dir
! 2165: do
! 2166: libdirs="$libdirs $dir"
! 2167: done
! 2168:
! 2169: for libdir in $libdirs; do
! 2170: if test -n "$finish_cmds"; then
! 2171: # Do each command in the finish commands.
! 2172: func_execute_cmds "$finish_cmds" 'admincmds="$admincmds
! 2173: '"$cmd"'"'
! 2174: fi
! 2175: if test -n "$finish_eval"; then
! 2176: # Do the single finish_eval.
! 2177: eval cmds=\"$finish_eval\"
! 2178: $opt_dry_run || eval "$cmds" || admincmds="$admincmds
! 2179: $cmds"
! 2180: fi
! 2181: done
! 2182: fi
! 2183:
! 2184: # Exit here if they wanted silent mode.
! 2185: $opt_silent && exit $EXIT_SUCCESS
! 2186:
! 2187: $ECHO "X----------------------------------------------------------------------" | $Xsed
! 2188: $ECHO "Libraries have been installed in:"
! 2189: for libdir in $libdirs; do
! 2190: $ECHO " $libdir"
! 2191: done
! 2192: $ECHO
! 2193: $ECHO "If you ever happen to want to link against installed libraries"
! 2194: $ECHO "in a given directory, LIBDIR, you must either use libtool, and"
! 2195: $ECHO "specify the full pathname of the library, or use the \`-LLIBDIR'"
! 2196: $ECHO "flag during linking and do at least one of the following:"
! 2197: if test -n "$shlibpath_var"; then
! 2198: $ECHO " - add LIBDIR to the \`$shlibpath_var' environment variable"
! 2199: $ECHO " during execution"
! 2200: fi
! 2201: if test -n "$runpath_var"; then
! 2202: $ECHO " - add LIBDIR to the \`$runpath_var' environment variable"
! 2203: $ECHO " during linking"
! 2204: fi
! 2205: if test -n "$hardcode_libdir_flag_spec"; then
! 2206: libdir=LIBDIR
! 2207: eval flag=\"$hardcode_libdir_flag_spec\"
! 2208:
! 2209: $ECHO " - use the \`$flag' linker flag"
! 2210: fi
! 2211: if test -n "$admincmds"; then
! 2212: $ECHO " - have your system administrator run these commands:$admincmds"
! 2213: fi
! 2214: if test -f /etc/ld.so.conf; then
! 2215: $ECHO " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
! 2216: fi
! 2217: $ECHO
! 2218:
! 2219: $ECHO "See any operating system documentation about shared libraries for"
! 2220: case $host in
! 2221: solaris2.[6789]|solaris2.1[0-9])
! 2222: $ECHO "more information, such as the ld(1), crle(1) and ld.so(8) manual"
! 2223: $ECHO "pages."
! 2224: ;;
! 2225: *)
! 2226: $ECHO "more information, such as the ld(1) and ld.so(8) manual pages."
! 2227: ;;
! 2228: esac
! 2229: $ECHO "X----------------------------------------------------------------------" | $Xsed
! 2230: exit $EXIT_SUCCESS
! 2231: }
! 2232:
! 2233: test "$mode" = finish && func_mode_finish ${1+"$@"}
! 2234:
! 2235:
! 2236: # func_mode_install arg...
! 2237: func_mode_install ()
! 2238: {
! 2239: $opt_debug
! 2240: # There may be an optional sh(1) argument at the beginning of
! 2241: # install_prog (especially on Windows NT).
! 2242: if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
! 2243: # Allow the use of GNU shtool's install command.
! 2244: $ECHO "X$nonopt" | $GREP shtool >/dev/null; then
! 2245: # Aesthetically quote it.
! 2246: func_quote_for_eval "$nonopt"
! 2247: install_prog="$func_quote_for_eval_result "
! 2248: arg=$1
! 2249: shift
! 2250: else
! 2251: install_prog=
! 2252: arg=$nonopt
! 2253: fi
! 2254:
! 2255: # The real first argument should be the name of the installation program.
! 2256: # Aesthetically quote it.
! 2257: func_quote_for_eval "$arg"
! 2258: install_prog="$install_prog$func_quote_for_eval_result"
! 2259:
! 2260: # We need to accept at least all the BSD install flags.
! 2261: dest=
! 2262: files=
! 2263: opts=
! 2264: prev=
! 2265: install_type=
! 2266: isdir=no
! 2267: stripme=
! 2268: for arg
! 2269: do
! 2270: if test -n "$dest"; then
! 2271: files="$files $dest"
! 2272: dest=$arg
! 2273: continue
! 2274: fi
! 2275:
! 2276: case $arg in
! 2277: -d) isdir=yes ;;
! 2278: -f)
! 2279: case " $install_prog " in
! 2280: *[\\\ /]cp\ *) ;;
! 2281: *) prev=$arg ;;
! 2282: esac
! 2283: ;;
! 2284: -g | -m | -o)
! 2285: prev=$arg
! 2286: ;;
! 2287: -s)
! 2288: stripme=" -s"
! 2289: continue
! 2290: ;;
! 2291: -*)
! 2292: ;;
! 2293: *)
! 2294: # If the previous option needed an argument, then skip it.
! 2295: if test -n "$prev"; then
! 2296: prev=
! 2297: else
! 2298: dest=$arg
! 2299: continue
! 2300: fi
! 2301: ;;
! 2302: esac
! 2303:
! 2304: # Aesthetically quote the argument.
! 2305: func_quote_for_eval "$arg"
! 2306: install_prog="$install_prog $func_quote_for_eval_result"
! 2307: done
! 2308:
! 2309: test -z "$install_prog" && \
! 2310: func_fatal_help "you must specify an install program"
! 2311:
! 2312: test -n "$prev" && \
! 2313: func_fatal_help "the \`$prev' option requires an argument"
! 2314:
! 2315: if test -z "$files"; then
! 2316: if test -z "$dest"; then
! 2317: func_fatal_help "no file or destination specified"
! 2318: else
! 2319: func_fatal_help "you must specify a destination"
! 2320: fi
! 2321: fi
! 2322:
! 2323: # Strip any trailing slash from the destination.
! 2324: func_stripname '' '/' "$dest"
! 2325: dest=$func_stripname_result
! 2326:
! 2327: # Check to see that the destination is a directory.
! 2328: test -d "$dest" && isdir=yes
! 2329: if test "$isdir" = yes; then
! 2330: destdir="$dest"
! 2331: destname=
! 2332: else
! 2333: func_dirname_and_basename "$dest" "" "."
! 2334: destdir="$func_dirname_result"
! 2335: destname="$func_basename_result"
! 2336:
! 2337: # Not a directory, so check to see that there is only one file specified.
! 2338: set dummy $files; shift
! 2339: test "$#" -gt 1 && \
! 2340: func_fatal_help "\`$dest' is not a directory"
! 2341: fi
! 2342: case $destdir in
! 2343: [\\/]* | [A-Za-z]:[\\/]*) ;;
! 2344: *)
! 2345: for file in $files; do
! 2346: case $file in
! 2347: *.lo) ;;
! 2348: *)
! 2349: func_fatal_help "\`$destdir' must be an absolute directory name"
! 2350: ;;
! 2351: esac
! 2352: done
! 2353: ;;
! 2354: esac
! 2355:
! 2356: # This variable tells wrapper scripts just to set variables rather
! 2357: # than running their programs.
! 2358: libtool_install_magic="$magic"
! 2359:
! 2360: staticlibs=
! 2361: future_libdirs=
! 2362: current_libdirs=
! 2363: for file in $files; do
! 2364:
! 2365: # Do each installation.
! 2366: case $file in
! 2367: *.$libext)
! 2368: # Do the static libraries later.
! 2369: staticlibs="$staticlibs $file"
! 2370: ;;
! 2371:
! 2372: *.la)
! 2373: # Check to see that this really is a libtool archive.
! 2374: func_lalib_unsafe_p "$file" \
! 2375: || func_fatal_help "\`$file' is not a valid libtool archive"
! 2376:
! 2377: library_names=
! 2378: old_library=
! 2379: relink_command=
! 2380: func_source "$file"
! 2381:
! 2382: # Add the libdir to current_libdirs if it is the destination.
! 2383: if test "X$destdir" = "X$libdir"; then
! 2384: case "$current_libdirs " in
! 2385: *" $libdir "*) ;;
! 2386: *) current_libdirs="$current_libdirs $libdir" ;;
! 2387: esac
! 2388: else
! 2389: # Note the libdir as a future libdir.
! 2390: case "$future_libdirs " in
! 2391: *" $libdir "*) ;;
! 2392: *) future_libdirs="$future_libdirs $libdir" ;;
! 2393: esac
! 2394: fi
! 2395:
! 2396: func_dirname "$file" "/" ""
! 2397: dir="$func_dirname_result"
! 2398: dir="$dir$objdir"
! 2399:
! 2400: if test -n "$relink_command"; then
! 2401: # Determine the prefix the user has applied to our future dir.
! 2402: inst_prefix_dir=`$ECHO "X$destdir" | $Xsed -e "s%$libdir\$%%"`
! 2403:
! 2404: # Don't allow the user to place us outside of our expected
! 2405: # location b/c this prevents finding dependent libraries that
! 2406: # are installed to the same prefix.
! 2407: # At present, this check doesn't affect windows .dll's that
! 2408: # are installed into $libdir/../bin (currently, that works fine)
! 2409: # but it's something to keep an eye on.
! 2410: test "$inst_prefix_dir" = "$destdir" && \
! 2411: func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"
! 2412:
! 2413: if test -n "$inst_prefix_dir"; then
! 2414: # Stick the inst_prefix_dir data into the link command.
! 2415: relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
! 2416: else
! 2417: relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%%"`
! 2418: fi
! 2419:
! 2420: func_warning "relinking \`$file'"
! 2421: func_show_eval "$relink_command" \
! 2422: 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'
! 2423: fi
! 2424:
! 2425: # See the names of the shared library.
! 2426: set dummy $library_names; shift
! 2427: if test -n "$1"; then
! 2428: realname="$1"
! 2429: shift
! 2430:
! 2431: srcname="$realname"
! 2432: test -n "$relink_command" && srcname="$realname"T
! 2433:
! 2434: # Install the shared library and build the symlinks.
! 2435: func_show_eval "$install_prog $dir/$srcname $destdir/$realname" \
! 2436: 'exit $?'
! 2437: tstripme="$stripme"
! 2438: case $host_os in
! 2439: cygwin* | mingw* | pw32*)
! 2440: case $realname in
! 2441: *.dll.a)
! 2442: tstripme=""
! 2443: ;;
! 2444: esac
! 2445: ;;
! 2446: esac
! 2447: if test -n "$tstripme" && test -n "$striplib"; then
! 2448: func_show_eval "$striplib $destdir/$realname" 'exit $?'
! 2449: fi
! 2450:
! 2451: if test "$#" -gt 0; then
! 2452: # Delete the old symlinks, and create new ones.
! 2453: # Try `ln -sf' first, because the `ln' binary might depend on
! 2454: # the symlink we replace! Solaris /bin/ln does not understand -f,
! 2455: # so we also need to try rm && ln -s.
! 2456: for linkname
! 2457: do
! 2458: test "$linkname" != "$realname" \
! 2459: && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })"
! 2460: done
! 2461: fi
! 2462:
! 2463: # Do each command in the postinstall commands.
! 2464: lib="$destdir/$realname"
! 2465: func_execute_cmds "$postinstall_cmds" 'exit $?'
! 2466: fi
! 2467:
! 2468: # Install the pseudo-library for information purposes.
! 2469: func_basename "$file"
! 2470: name="$func_basename_result"
! 2471: instname="$dir/$name"i
! 2472: func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
! 2473:
! 2474: # Maybe install the static library, too.
! 2475: test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
! 2476: ;;
! 2477:
! 2478: *.lo)
! 2479: # Install (i.e. copy) a libtool object.
! 2480:
! 2481: # Figure out destination file name, if it wasn't already specified.
! 2482: if test -n "$destname"; then
! 2483: destfile="$destdir/$destname"
! 2484: else
! 2485: func_basename "$file"
! 2486: destfile="$func_basename_result"
! 2487: destfile="$destdir/$destfile"
! 2488: fi
! 2489:
! 2490: # Deduce the name of the destination old-style object file.
! 2491: case $destfile in
! 2492: *.lo)
! 2493: func_lo2o "$destfile"
! 2494: staticdest=$func_lo2o_result
! 2495: ;;
! 2496: *.$objext)
! 2497: staticdest="$destfile"
! 2498: destfile=
! 2499: ;;
! 2500: *)
! 2501: func_fatal_help "cannot copy a libtool object to \`$destfile'"
! 2502: ;;
! 2503: esac
! 2504:
! 2505: # Install the libtool object if requested.
! 2506: test -n "$destfile" && \
! 2507: func_show_eval "$install_prog $file $destfile" 'exit $?'
! 2508:
! 2509: # Install the old object if enabled.
! 2510: if test "$build_old_libs" = yes; then
! 2511: # Deduce the name of the old-style object file.
! 2512: func_lo2o "$file"
! 2513: staticobj=$func_lo2o_result
! 2514: func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?'
! 2515: fi
! 2516: exit $EXIT_SUCCESS
! 2517: ;;
! 2518:
! 2519: *)
! 2520: # Figure out destination file name, if it wasn't already specified.
! 2521: if test -n "$destname"; then
! 2522: destfile="$destdir/$destname"
! 2523: else
! 2524: func_basename "$file"
! 2525: destfile="$func_basename_result"
! 2526: destfile="$destdir/$destfile"
! 2527: fi
! 2528:
! 2529: # If the file is missing, and there is a .exe on the end, strip it
! 2530: # because it is most likely a libtool script we actually want to
! 2531: # install
! 2532: stripped_ext=""
! 2533: case $file in
! 2534: *.exe)
! 2535: if test ! -f "$file"; then
! 2536: func_stripname '' '.exe' "$file"
! 2537: file=$func_stripname_result
! 2538: stripped_ext=".exe"
! 2539: fi
! 2540: ;;
! 2541: esac
! 2542:
! 2543: # Do a test to see if this is really a libtool program.
! 2544: case $host in
! 2545: *cygwin*|*mingw*)
! 2546: if func_ltwrapper_executable_p "$file"; then
! 2547: func_ltwrapper_scriptname "$file"
! 2548: wrapper=$func_ltwrapper_scriptname_result
! 2549: else
! 2550: func_stripname '' '.exe' "$file"
! 2551: wrapper=$func_stripname_result
! 2552: fi
! 2553: ;;
! 2554: *)
! 2555: wrapper=$file
! 2556: ;;
! 2557: esac
! 2558: if func_ltwrapper_script_p "$wrapper"; then
! 2559: notinst_deplibs=
! 2560: relink_command=
! 2561:
! 2562: func_source "$wrapper"
! 2563:
! 2564: # Check the variables that should have been set.
! 2565: test -z "$generated_by_libtool_version" && \
! 2566: func_fatal_error "invalid libtool wrapper script \`$wrapper'"
! 2567:
! 2568: finalize=yes
! 2569: for lib in $notinst_deplibs; do
! 2570: # Check to see that each library is installed.
! 2571: libdir=
! 2572: if test -f "$lib"; then
! 2573: func_source "$lib"
! 2574: fi
! 2575: libfile="$libdir/"`$ECHO "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
! 2576: if test -n "$libdir" && test ! -f "$libfile"; then
! 2577: func_warning "\`$lib' has not been installed in \`$libdir'"
! 2578: finalize=no
! 2579: fi
! 2580: done
! 2581:
! 2582: relink_command=
! 2583: func_source "$wrapper"
! 2584:
! 2585: outputname=
! 2586: if test "$fast_install" = no && test -n "$relink_command"; then
! 2587: $opt_dry_run || {
! 2588: if test "$finalize" = yes; then
! 2589: tmpdir=`func_mktempdir`
! 2590: func_basename "$file$stripped_ext"
! 2591: file="$func_basename_result"
! 2592: outputname="$tmpdir/$file"
! 2593: # Replace the output file specification.
! 2594: relink_command=`$ECHO "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
! 2595:
! 2596: $opt_silent || {
! 2597: func_quote_for_expand "$relink_command"
! 2598: eval "func_echo $func_quote_for_expand_result"
! 2599: }
! 2600: if eval "$relink_command"; then :
! 2601: else
! 2602: func_error "error: relink \`$file' with the above command before installing it"
! 2603: $opt_dry_run || ${RM}r "$tmpdir"
! 2604: continue
! 2605: fi
! 2606: file="$outputname"
! 2607: else
! 2608: func_warning "cannot relink \`$file'"
! 2609: fi
! 2610: }
! 2611: else
! 2612: # Install the binary that we compiled earlier.
! 2613: file=`$ECHO "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
! 2614: fi
! 2615: fi
! 2616:
! 2617: # remove .exe since cygwin /usr/bin/install will append another
! 2618: # one anyway
! 2619: case $install_prog,$host in
! 2620: */usr/bin/install*,*cygwin*)
! 2621: case $file:$destfile in
! 2622: *.exe:*.exe)
! 2623: # this is ok
! 2624: ;;
! 2625: *.exe:*)
! 2626: destfile=$destfile.exe
! 2627: ;;
! 2628: *:*.exe)
! 2629: func_stripname '' '.exe' "$destfile"
! 2630: destfile=$func_stripname_result
! 2631: ;;
! 2632: esac
! 2633: ;;
! 2634: esac
! 2635: func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?'
! 2636: $opt_dry_run || if test -n "$outputname"; then
! 2637: ${RM}r "$tmpdir"
! 2638: fi
! 2639: ;;
! 2640: esac
! 2641: done
! 2642:
! 2643: for file in $staticlibs; do
! 2644: func_basename "$file"
! 2645: name="$func_basename_result"
! 2646:
! 2647: # Set up the ranlib parameters.
! 2648: oldlib="$destdir/$name"
! 2649:
! 2650: func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
! 2651:
! 2652: if test -n "$stripme" && test -n "$old_striplib"; then
! 2653: func_show_eval "$old_striplib $oldlib" 'exit $?'
! 2654: fi
! 2655:
! 2656: # Do each command in the postinstall commands.
! 2657: func_execute_cmds "$old_postinstall_cmds" 'exit $?'
! 2658: done
! 2659:
! 2660: test -n "$future_libdirs" && \
! 2661: func_warning "remember to run \`$progname --finish$future_libdirs'"
! 2662:
! 2663: if test -n "$current_libdirs"; then
! 2664: # Maybe just do a dry run.
! 2665: $opt_dry_run && current_libdirs=" -n$current_libdirs"
! 2666: exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
! 2667: else
! 2668: exit $EXIT_SUCCESS
! 2669: fi
! 2670: }
! 2671:
! 2672: test "$mode" = install && func_mode_install ${1+"$@"}
! 2673:
! 2674:
! 2675: # func_emit_wrapper arg
! 2676: #
! 2677: # emit a libtool wrapper script on stdout
! 2678: # don't directly open a file because we may want to
! 2679: # incorporate the script contents within a cygwin/mingw
! 2680: # wrapper executable. Must ONLY be called from within
! 2681: # func_mode_link because it depends on a number of variable
! 2682: # set therein.
! 2683: #
! 2684: # arg is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
! 2685: # variable will take. If 'yes', then the emitted script
! 2686: # will assume that the directory in which it is stored is
! 2687: # the '.lib' directory. This is a cygwin/mingw-specific
! 2688: # behavior.
! 2689: func_emit_wrapper ()
! 2690: {
! 2691: func_emit_wrapper_arg1=no
! 2692: if test -n "$1" ; then
! 2693: func_emit_wrapper_arg1=$1
! 2694: fi
! 2695:
! 2696: $ECHO "\
! 2697: #! $SHELL
! 2698:
! 2699: # $output - temporary wrapper script for $objdir/$outputname
! 2700: # Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
! 2701: #
! 2702: # The $output program cannot be directly executed until all the libtool
! 2703: # libraries that it depends on are installed.
! 2704: #
! 2705: # This wrapper script should never be moved out of the build directory.
! 2706: # If it is, it will not operate correctly.
! 2707:
! 2708: # Sed substitution that helps us do robust quoting. It backslashifies
! 2709: # metacharacters that are still active within double-quoted strings.
! 2710: Xsed='${SED} -e 1s/^X//'
! 2711: sed_quote_subst='$sed_quote_subst'
! 2712:
! 2713: # Be Bourne compatible
! 2714: if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
! 2715: emulate sh
! 2716: NULLCMD=:
! 2717: # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
! 2718: # is contrary to our usage. Disable this feature.
! 2719: alias -g '\${1+\"\$@\"}'='\"\$@\"'
! 2720: setopt NO_GLOB_SUBST
! 2721: else
! 2722: case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
! 2723: fi
! 2724: BIN_SH=xpg4; export BIN_SH # for Tru64
! 2725: DUALCASE=1; export DUALCASE # for MKS sh
! 2726:
! 2727: # The HP-UX ksh and POSIX shell print the target directory to stdout
! 2728: # if CDPATH is set.
! 2729: (unset CDPATH) >/dev/null 2>&1 && unset CDPATH
! 2730:
! 2731: relink_command=\"$relink_command\"
! 2732:
! 2733: # This environment variable determines our operation mode.
! 2734: if test \"\$libtool_install_magic\" = \"$magic\"; then
! 2735: # install mode needs the following variables:
! 2736: generated_by_libtool_version='$macro_version'
! 2737: notinst_deplibs='$notinst_deplibs'
! 2738: else
! 2739: # When we are sourced in execute mode, \$file and \$ECHO are already set.
! 2740: if test \"\$libtool_execute_magic\" != \"$magic\"; then
! 2741: ECHO=\"$qecho\"
! 2742: file=\"\$0\"
! 2743: # Make sure echo works.
! 2744: if test \"X\$1\" = X--no-reexec; then
! 2745: # Discard the --no-reexec flag, and continue.
! 2746: shift
! 2747: elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then
! 2748: # Yippee, \$ECHO works!
! 2749: :
! 2750: else
! 2751: # Restart under the correct shell, and then maybe \$ECHO will work.
! 2752: exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
! 2753: fi
! 2754: fi\
! 2755: "
! 2756: $ECHO "\
! 2757:
! 2758: # Find the directory that this script lives in.
! 2759: thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
! 2760: test \"x\$thisdir\" = \"x\$file\" && thisdir=.
! 2761:
! 2762: # Follow symbolic links until we get to the real thisdir.
! 2763: file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
! 2764: while test -n \"\$file\"; do
! 2765: destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
! 2766:
! 2767: # If there was a directory component, then change thisdir.
! 2768: if test \"x\$destdir\" != \"x\$file\"; then
! 2769: case \"\$destdir\" in
! 2770: [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
! 2771: *) thisdir=\"\$thisdir/\$destdir\" ;;
! 2772: esac
! 2773: fi
! 2774:
! 2775: file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
! 2776: file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
! 2777: done
! 2778:
! 2779: # Usually 'no', except on cygwin/mingw when embedded into
! 2780: # the cwrapper.
! 2781: WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1
! 2782: if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
! 2783: # special case for '.'
! 2784: if test \"\$thisdir\" = \".\"; then
! 2785: thisdir=\`pwd\`
! 2786: fi
! 2787: # remove .libs from thisdir
! 2788: case \"\$thisdir\" in
! 2789: *[\\\\/]$objdir ) thisdir=\`\$ECHO \"X\$thisdir\" | \$Xsed -e 's%[\\\\/][^\\\\/]*$%%'\` ;;
! 2790: $objdir ) thisdir=. ;;
! 2791: esac
! 2792: fi
! 2793:
! 2794: # Try to get the absolute directory name.
! 2795: absdir=\`cd \"\$thisdir\" && pwd\`
! 2796: test -n \"\$absdir\" && thisdir=\"\$absdir\"
! 2797: "
! 2798:
! 2799: if test "$fast_install" = yes; then
! 2800: $ECHO "\
! 2801: program=lt-'$outputname'$exeext
! 2802: progdir=\"\$thisdir/$objdir\"
! 2803:
! 2804: if test ! -f \"\$progdir/\$program\" ||
! 2805: { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
! 2806: test \"X\$file\" != \"X\$progdir/\$program\"; }; then
! 2807:
! 2808: file=\"\$\$-\$program\"
! 2809:
! 2810: if test ! -d \"\$progdir\"; then
! 2811: $MKDIR \"\$progdir\"
! 2812: else
! 2813: $RM \"\$progdir/\$file\"
! 2814: fi"
! 2815:
! 2816: $ECHO "\
! 2817:
! 2818: # relink executable if necessary
! 2819: if test -n \"\$relink_command\"; then
! 2820: if relink_command_output=\`eval \$relink_command 2>&1\`; then :
! 2821: else
! 2822: $ECHO \"\$relink_command_output\" >&2
! 2823: $RM \"\$progdir/\$file\"
! 2824: exit 1
! 2825: fi
! 2826: fi
! 2827:
! 2828: $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
! 2829: { $RM \"\$progdir/\$program\";
! 2830: $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
! 2831: $RM \"\$progdir/\$file\"
! 2832: fi"
! 2833: else
! 2834: $ECHO "\
! 2835: program='$outputname'
! 2836: progdir=\"\$thisdir/$objdir\"
! 2837: "
! 2838: fi
! 2839:
! 2840: $ECHO "\
! 2841:
! 2842: if test -f \"\$progdir/\$program\"; then"
! 2843:
! 2844: # Export our shlibpath_var if we have one.
! 2845: if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
! 2846: $ECHO "\
! 2847: # Add our own library path to $shlibpath_var
! 2848: $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
! 2849:
! 2850: # Some systems cannot cope with colon-terminated $shlibpath_var
! 2851: # The second colon is a workaround for a bug in BeOS R4 sed
! 2852: $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
! 2853:
! 2854: export $shlibpath_var
! 2855: "
! 2856: fi
! 2857:
! 2858: # fixup the dll searchpath if we need to.
! 2859: if test -n "$dllsearchpath"; then
! 2860: $ECHO "\
! 2861: # Add the dll search path components to the executable PATH
! 2862: PATH=$dllsearchpath:\$PATH
! 2863: "
! 2864: fi
! 2865:
! 2866: $ECHO "\
! 2867: if test \"\$libtool_execute_magic\" != \"$magic\"; then
! 2868: # Run the actual program with our arguments.
! 2869: "
! 2870: case $host in
! 2871: # Backslashes separate directories on plain windows
! 2872: *-*-mingw | *-*-os2*)
! 2873: $ECHO "\
! 2874: exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
! 2875: "
! 2876: ;;
! 2877:
! 2878: *)
! 2879: $ECHO "\
! 2880: exec \"\$progdir/\$program\" \${1+\"\$@\"}
! 2881: "
! 2882: ;;
! 2883: esac
! 2884: $ECHO "\
! 2885: \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
! 2886: exit 1
! 2887: fi
! 2888: else
! 2889: # The program doesn't exist.
! 2890: \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
! 2891: \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
! 2892: $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
! 2893: exit 1
! 2894: fi
! 2895: fi\
! 2896: "
! 2897: }
! 2898: # end: func_emit_wrapper
! 2899:
! 2900: # func_emit_cwrapperexe_src
! 2901: # emit the source code for a wrapper executable on stdout
! 2902: # Must ONLY be called from within func_mode_link because
! 2903: # it depends on a number of variable set therein.
! 2904: func_emit_cwrapperexe_src ()
! 2905: {
! 2906: cat <<EOF
! 2907:
! 2908: /* $cwrappersource - temporary wrapper executable for $objdir/$outputname
! 2909: Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
! 2910:
! 2911: The $output program cannot be directly executed until all the libtool
! 2912: libraries that it depends on are installed.
! 2913:
! 2914: This wrapper executable should never be moved out of the build directory.
! 2915: If it is, it will not operate correctly.
! 2916:
! 2917: Currently, it simply execs the wrapper *script* "$SHELL $output",
! 2918: but could eventually absorb all of the scripts functionality and
! 2919: exec $objdir/$outputname directly.
! 2920: */
! 2921: EOF
! 2922: cat <<"EOF"
! 2923: #include <stdio.h>
! 2924: #include <stdlib.h>
! 2925: #ifdef _MSC_VER
! 2926: # include <direct.h>
! 2927: # include <process.h>
! 2928: # include <io.h>
! 2929: #else
! 2930: # include <unistd.h>
! 2931: # include <stdint.h>
! 2932: #endif
! 2933: #include <malloc.h>
! 2934: #include <stdarg.h>
! 2935: #include <assert.h>
! 2936: #include <string.h>
! 2937: #include <ctype.h>
! 2938: #include <errno.h>
! 2939: #include <fcntl.h>
! 2940: #include <sys/stat.h>
! 2941:
! 2942: #if defined(PATH_MAX)
! 2943: # define LT_PATHMAX PATH_MAX
! 2944: #elif defined(MAXPATHLEN)
! 2945: # define LT_PATHMAX MAXPATHLEN
! 2946: #else
! 2947: # define LT_PATHMAX 1024
! 2948: #endif
! 2949:
! 2950: #ifndef S_IXOTH
! 2951: # define S_IXOTH 0
! 2952: #endif
! 2953: #ifndef S_IXGRP
! 2954: # define S_IXGRP 0
! 2955: #endif
! 2956:
! 2957: #ifdef _MSC_VER
! 2958: # define S_IXUSR _S_IEXEC
! 2959: # define stat _stat
! 2960: # ifndef _INTPTR_T_DEFINED
! 2961: # define intptr_t int
! 2962: # endif
! 2963: #endif
! 2964:
! 2965: #ifndef DIR_SEPARATOR
! 2966: # define DIR_SEPARATOR '/'
! 2967: # define PATH_SEPARATOR ':'
! 2968: #endif
! 2969:
! 2970: #if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
! 2971: defined (__OS2__)
! 2972: # define HAVE_DOS_BASED_FILE_SYSTEM
! 2973: # define FOPEN_WB "wb"
! 2974: # ifndef DIR_SEPARATOR_2
! 2975: # define DIR_SEPARATOR_2 '\\'
! 2976: # endif
! 2977: # ifndef PATH_SEPARATOR_2
! 2978: # define PATH_SEPARATOR_2 ';'
! 2979: # endif
! 2980: #endif
! 2981:
! 2982: #ifndef DIR_SEPARATOR_2
! 2983: # define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
! 2984: #else /* DIR_SEPARATOR_2 */
! 2985: # define IS_DIR_SEPARATOR(ch) \
! 2986: (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
! 2987: #endif /* DIR_SEPARATOR_2 */
! 2988:
! 2989: #ifndef PATH_SEPARATOR_2
! 2990: # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
! 2991: #else /* PATH_SEPARATOR_2 */
! 2992: # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
! 2993: #endif /* PATH_SEPARATOR_2 */
! 2994:
! 2995: #ifdef __CYGWIN__
! 2996: # define FOPEN_WB "wb"
! 2997: #endif
! 2998:
! 2999: #ifndef FOPEN_WB
! 3000: # define FOPEN_WB "w"
! 3001: #endif
! 3002: #ifndef _O_BINARY
! 3003: # define _O_BINARY 0
! 3004: #endif
! 3005:
! 3006: #define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type)))
! 3007: #define XFREE(stale) do { \
! 3008: if (stale) { free ((void *) stale); stale = 0; } \
! 3009: } while (0)
! 3010:
! 3011: #undef LTWRAPPER_DEBUGPRINTF
! 3012: #if defined DEBUGWRAPPER
! 3013: # define LTWRAPPER_DEBUGPRINTF(args) ltwrapper_debugprintf args
! 3014: static void
! 3015: ltwrapper_debugprintf (const char *fmt, ...)
! 3016: {
! 3017: va_list args;
! 3018: va_start (args, fmt);
! 3019: (void) vfprintf (stderr, fmt, args);
! 3020: va_end (args);
! 3021: }
! 3022: #else
! 3023: # define LTWRAPPER_DEBUGPRINTF(args)
! 3024: #endif
! 3025:
! 3026: const char *program_name = NULL;
! 3027:
! 3028: void *xmalloc (size_t num);
! 3029: char *xstrdup (const char *string);
! 3030: const char *base_name (const char *name);
! 3031: char *find_executable (const char *wrapper);
! 3032: char *chase_symlinks (const char *pathspec);
! 3033: int make_executable (const char *path);
! 3034: int check_executable (const char *path);
! 3035: char *strendzap (char *str, const char *pat);
! 3036: void lt_fatal (const char *message, ...);
! 3037:
! 3038: static const char *script_text =
! 3039: EOF
! 3040:
! 3041: func_emit_wrapper yes |
! 3042: $SED -e 's/\([\\"]\)/\\\1/g' \
! 3043: -e 's/^/ "/' -e 's/$/\\n"/'
! 3044: echo ";"
! 3045:
! 3046: cat <<EOF
! 3047: const char * MAGIC_EXE = "$magic_exe";
! 3048:
! 3049: int
! 3050: main (int argc, char *argv[])
! 3051: {
! 3052: char **newargz;
! 3053: char *tmp_pathspec;
! 3054: char *actual_cwrapper_path;
! 3055: char *shwrapper_name;
! 3056: intptr_t rval = 127;
! 3057: FILE *shwrapper;
! 3058:
! 3059: const char *dumpscript_opt = "--lt-dump-script";
! 3060: int i;
! 3061:
! 3062: program_name = (char *) xstrdup (base_name (argv[0]));
! 3063: LTWRAPPER_DEBUGPRINTF (("(main) argv[0] : %s\n", argv[0]));
! 3064: LTWRAPPER_DEBUGPRINTF (("(main) program_name : %s\n", program_name));
! 3065:
! 3066: /* very simple arg parsing; don't want to rely on getopt */
! 3067: for (i = 1; i < argc; i++)
! 3068: {
! 3069: if (strcmp (argv[i], dumpscript_opt) == 0)
! 3070: {
! 3071: EOF
! 3072: case "$host" in
! 3073: *mingw* | *cygwin* )
! 3074: # make stdout use "unix" line endings
! 3075: echo " _setmode(1,_O_BINARY);"
! 3076: ;;
! 3077: esac
! 3078:
! 3079: cat <<EOF
! 3080: printf ("%s", script_text);
! 3081: return 0;
! 3082: }
! 3083: }
! 3084:
! 3085: newargz = XMALLOC (char *, argc + 2);
! 3086: EOF
! 3087:
! 3088: if test -n "$TARGETSHELL" ; then
! 3089: # no path translation at all
! 3090: lt_newargv0=$TARGETSHELL
! 3091: else
! 3092: case "$host" in
! 3093: *mingw* )
! 3094: # awkward: cmd appends spaces to result
! 3095: lt_sed_strip_trailing_spaces="s/[ ]*\$//"
! 3096: lt_newargv0=`( cmd //c echo $SHELL | $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo $SHELL`
! 3097: case $lt_newargv0 in
! 3098: *.exe | *.EXE) ;;
! 3099: *) lt_newargv0=$lt_newargv0.exe ;;
! 3100: esac
! 3101: ;;
! 3102: * ) lt_newargv0=$SHELL ;;
! 3103: esac
! 3104: fi
! 3105:
! 3106: cat <<EOF
! 3107: newargz[0] = (char *) xstrdup ("$lt_newargv0");
! 3108: EOF
! 3109:
! 3110: cat <<"EOF"
! 3111: tmp_pathspec = find_executable (argv[0]);
! 3112: if (tmp_pathspec == NULL)
! 3113: lt_fatal ("Couldn't find %s", argv[0]);
! 3114: LTWRAPPER_DEBUGPRINTF (("(main) found exe (before symlink chase) at : %s\n",
! 3115: tmp_pathspec));
! 3116:
! 3117: actual_cwrapper_path = chase_symlinks (tmp_pathspec);
! 3118: LTWRAPPER_DEBUGPRINTF (("(main) found exe (after symlink chase) at : %s\n",
! 3119: actual_cwrapper_path));
! 3120: XFREE (tmp_pathspec);
! 3121:
! 3122: shwrapper_name = (char *) xstrdup (base_name (actual_cwrapper_path));
! 3123: strendzap (actual_cwrapper_path, shwrapper_name);
! 3124:
! 3125: /* shwrapper_name transforms */
! 3126: strendzap (shwrapper_name, ".exe");
! 3127: tmp_pathspec = XMALLOC (char, (strlen (shwrapper_name) +
! 3128: strlen ("_ltshwrapperTMP") + 1));
! 3129: strcpy (tmp_pathspec, shwrapper_name);
! 3130: strcat (tmp_pathspec, "_ltshwrapperTMP");
! 3131: XFREE (shwrapper_name);
! 3132: shwrapper_name = tmp_pathspec;
! 3133: tmp_pathspec = 0;
! 3134: LTWRAPPER_DEBUGPRINTF (("(main) libtool shell wrapper name: %s\n",
! 3135: shwrapper_name));
! 3136: EOF
! 3137:
! 3138: cat <<EOF
! 3139: newargz[1] =
! 3140: XMALLOC (char, (strlen (actual_cwrapper_path) +
! 3141: strlen ("$objdir") + 1 + strlen (shwrapper_name) + 1));
! 3142: strcpy (newargz[1], actual_cwrapper_path);
! 3143: strcat (newargz[1], "$objdir");
! 3144: strcat (newargz[1], "/");
! 3145: strcat (newargz[1], shwrapper_name);
! 3146: EOF
! 3147:
! 3148:
! 3149: case $host_os in
! 3150: mingw*)
! 3151: cat <<"EOF"
! 3152: {
! 3153: char* p;
! 3154: while ((p = strchr (newargz[1], '\\')) != NULL)
! 3155: {
! 3156: *p = '/';
! 3157: }
! 3158: }
! 3159: EOF
! 3160: ;;
! 3161: esac
! 3162:
! 3163: cat <<"EOF"
! 3164: XFREE (shwrapper_name);
! 3165: XFREE (actual_cwrapper_path);
! 3166:
! 3167: /* always write in binary mode */
! 3168: if ((shwrapper = fopen (newargz[1], FOPEN_WB)) == 0)
! 3169: {
! 3170: lt_fatal ("Could not open %s for writing", newargz[1]);
! 3171: }
! 3172: fprintf (shwrapper, "%s", script_text);
! 3173: fclose (shwrapper);
! 3174:
! 3175: make_executable (newargz[1]);
! 3176:
! 3177: for (i = 1; i < argc; i++)
! 3178: newargz[i + 1] = xstrdup (argv[i]);
! 3179: newargz[argc + 1] = NULL;
! 3180:
! 3181: for (i = 0; i < argc + 1; i++)
! 3182: {
! 3183: LTWRAPPER_DEBUGPRINTF (("(main) newargz[%d] : %s\n", i, newargz[i]));
! 3184: }
! 3185:
! 3186: EOF
! 3187:
! 3188: case $host_os in
! 3189: mingw*)
! 3190: cat <<EOF
! 3191: /* execv doesn't actually work on mingw as expected on unix */
! 3192: rval = _spawnv (_P_WAIT, "$lt_newargv0", (const char * const *) newargz);
! 3193: if (rval == -1)
! 3194: {
! 3195: /* failed to start process */
! 3196: LTWRAPPER_DEBUGPRINTF (("(main) failed to launch target \"$lt_newargv0\": errno = %d\n", errno));
! 3197: return 127;
! 3198: }
! 3199: return rval;
! 3200: }
! 3201: EOF
! 3202: ;;
! 3203: *)
! 3204: cat <<EOF
! 3205: execv ("$lt_newargv0", newargz);
! 3206: return rval; /* =127, but avoids unused variable warning */
! 3207: }
! 3208: EOF
! 3209: ;;
! 3210: esac
! 3211:
! 3212: cat <<"EOF"
! 3213:
! 3214: void *
! 3215: xmalloc (size_t num)
! 3216: {
! 3217: void *p = (void *) malloc (num);
! 3218: if (!p)
! 3219: lt_fatal ("Memory exhausted");
! 3220:
! 3221: return p;
! 3222: }
! 3223:
! 3224: char *
! 3225: xstrdup (const char *string)
! 3226: {
! 3227: return string ? strcpy ((char *) xmalloc (strlen (string) + 1),
! 3228: string) : NULL;
! 3229: }
! 3230:
! 3231: const char *
! 3232: base_name (const char *name)
! 3233: {
! 3234: const char *base;
! 3235:
! 3236: #if defined (HAVE_DOS_BASED_FILE_SYSTEM)
! 3237: /* Skip over the disk name in MSDOS pathnames. */
! 3238: if (isalpha ((unsigned char) name[0]) && name[1] == ':')
! 3239: name += 2;
! 3240: #endif
! 3241:
! 3242: for (base = name; *name; name++)
! 3243: if (IS_DIR_SEPARATOR (*name))
! 3244: base = name + 1;
! 3245: return base;
! 3246: }
! 3247:
! 3248: int
! 3249: check_executable (const char *path)
! 3250: {
! 3251: struct stat st;
! 3252:
! 3253: LTWRAPPER_DEBUGPRINTF (("(check_executable) : %s\n",
! 3254: path ? (*path ? path : "EMPTY!") : "NULL!"));
! 3255: if ((!path) || (!*path))
! 3256: return 0;
! 3257:
! 3258: if ((stat (path, &st) >= 0)
! 3259: && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH)))
! 3260: return 1;
! 3261: else
! 3262: return 0;
! 3263: }
! 3264:
! 3265: int
! 3266: make_executable (const char *path)
! 3267: {
! 3268: int rval = 0;
! 3269: struct stat st;
! 3270:
! 3271: LTWRAPPER_DEBUGPRINTF (("(make_executable) : %s\n",
! 3272: path ? (*path ? path : "EMPTY!") : "NULL!"));
! 3273: if ((!path) || (!*path))
! 3274: return 0;
! 3275:
! 3276: if (stat (path, &st) >= 0)
! 3277: {
! 3278: rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR);
! 3279: }
! 3280: return rval;
! 3281: }
! 3282:
! 3283: /* Searches for the full path of the wrapper. Returns
! 3284: newly allocated full path name if found, NULL otherwise
! 3285: Does not chase symlinks, even on platforms that support them.
! 3286: */
! 3287: char *
! 3288: find_executable (const char *wrapper)
! 3289: {
! 3290: int has_slash = 0;
! 3291: const char *p;
! 3292: const char *p_next;
! 3293: /* static buffer for getcwd */
! 3294: char tmp[LT_PATHMAX + 1];
! 3295: int tmp_len;
! 3296: char *concat_name;
! 3297:
! 3298: LTWRAPPER_DEBUGPRINTF (("(find_executable) : %s\n",
! 3299: wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!"));
! 3300:
! 3301: if ((wrapper == NULL) || (*wrapper == '\0'))
! 3302: return NULL;
! 3303:
! 3304: /* Absolute path? */
! 3305: #if defined (HAVE_DOS_BASED_FILE_SYSTEM)
! 3306: if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
! 3307: {
! 3308: concat_name = xstrdup (wrapper);
! 3309: if (check_executable (concat_name))
! 3310: return concat_name;
! 3311: XFREE (concat_name);
! 3312: }
! 3313: else
! 3314: {
! 3315: #endif
! 3316: if (IS_DIR_SEPARATOR (wrapper[0]))
! 3317: {
! 3318: concat_name = xstrdup (wrapper);
! 3319: if (check_executable (concat_name))
! 3320: return concat_name;
! 3321: XFREE (concat_name);
! 3322: }
! 3323: #if defined (HAVE_DOS_BASED_FILE_SYSTEM)
! 3324: }
! 3325: #endif
! 3326:
! 3327: for (p = wrapper; *p; p++)
! 3328: if (*p == '/')
! 3329: {
! 3330: has_slash = 1;
! 3331: break;
! 3332: }
! 3333: if (!has_slash)
! 3334: {
! 3335: /* no slashes; search PATH */
! 3336: const char *path = getenv ("PATH");
! 3337: if (path != NULL)
! 3338: {
! 3339: for (p = path; *p; p = p_next)
! 3340: {
! 3341: const char *q;
! 3342: size_t p_len;
! 3343: for (q = p; *q; q++)
! 3344: if (IS_PATH_SEPARATOR (*q))
! 3345: break;
! 3346: p_len = q - p;
! 3347: p_next = (*q == '\0' ? q : q + 1);
! 3348: if (p_len == 0)
! 3349: {
! 3350: /* empty path: current directory */
! 3351: if (getcwd (tmp, LT_PATHMAX) == NULL)
! 3352: lt_fatal ("getcwd failed");
! 3353: tmp_len = strlen (tmp);
! 3354: concat_name =
! 3355: XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
! 3356: memcpy (concat_name, tmp, tmp_len);
! 3357: concat_name[tmp_len] = '/';
! 3358: strcpy (concat_name + tmp_len + 1, wrapper);
! 3359: }
! 3360: else
! 3361: {
! 3362: concat_name =
! 3363: XMALLOC (char, p_len + 1 + strlen (wrapper) + 1);
! 3364: memcpy (concat_name, p, p_len);
! 3365: concat_name[p_len] = '/';
! 3366: strcpy (concat_name + p_len + 1, wrapper);
! 3367: }
! 3368: if (check_executable (concat_name))
! 3369: return concat_name;
! 3370: XFREE (concat_name);
! 3371: }
! 3372: }
! 3373: /* not found in PATH; assume curdir */
! 3374: }
! 3375: /* Relative path | not found in path: prepend cwd */
! 3376: if (getcwd (tmp, LT_PATHMAX) == NULL)
! 3377: lt_fatal ("getcwd failed");
! 3378: tmp_len = strlen (tmp);
! 3379: concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
! 3380: memcpy (concat_name, tmp, tmp_len);
! 3381: concat_name[tmp_len] = '/';
! 3382: strcpy (concat_name + tmp_len + 1, wrapper);
! 3383:
! 3384: if (check_executable (concat_name))
! 3385: return concat_name;
! 3386: XFREE (concat_name);
! 3387: return NULL;
! 3388: }
! 3389:
! 3390: char *
! 3391: chase_symlinks (const char *pathspec)
! 3392: {
! 3393: #ifndef S_ISLNK
! 3394: return xstrdup (pathspec);
! 3395: #else
! 3396: char buf[LT_PATHMAX];
! 3397: struct stat s;
! 3398: char *tmp_pathspec = xstrdup (pathspec);
! 3399: char *p;
! 3400: int has_symlinks = 0;
! 3401: while (strlen (tmp_pathspec) && !has_symlinks)
! 3402: {
! 3403: LTWRAPPER_DEBUGPRINTF (("checking path component for symlinks: %s\n",
! 3404: tmp_pathspec));
! 3405: if (lstat (tmp_pathspec, &s) == 0)
! 3406: {
! 3407: if (S_ISLNK (s.st_mode) != 0)
! 3408: {
! 3409: has_symlinks = 1;
! 3410: break;
! 3411: }
! 3412:
! 3413: /* search backwards for last DIR_SEPARATOR */
! 3414: p = tmp_pathspec + strlen (tmp_pathspec) - 1;
! 3415: while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
! 3416: p--;
! 3417: if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
! 3418: {
! 3419: /* no more DIR_SEPARATORS left */
! 3420: break;
! 3421: }
! 3422: *p = '\0';
! 3423: }
! 3424: else
! 3425: {
! 3426: char *errstr = strerror (errno);
! 3427: lt_fatal ("Error accessing file %s (%s)", tmp_pathspec, errstr);
! 3428: }
! 3429: }
! 3430: XFREE (tmp_pathspec);
! 3431:
! 3432: if (!has_symlinks)
! 3433: {
! 3434: return xstrdup (pathspec);
! 3435: }
! 3436:
! 3437: tmp_pathspec = realpath (pathspec, buf);
! 3438: if (tmp_pathspec == 0)
! 3439: {
! 3440: lt_fatal ("Could not follow symlinks for %s", pathspec);
! 3441: }
! 3442: return xstrdup (tmp_pathspec);
! 3443: #endif
! 3444: }
! 3445:
! 3446: char *
! 3447: strendzap (char *str, const char *pat)
! 3448: {
! 3449: size_t len, patlen;
! 3450:
! 3451: assert (str != NULL);
! 3452: assert (pat != NULL);
! 3453:
! 3454: len = strlen (str);
! 3455: patlen = strlen (pat);
! 3456:
! 3457: if (patlen <= len)
! 3458: {
! 3459: str += len - patlen;
! 3460: if (strcmp (str, pat) == 0)
! 3461: *str = '\0';
! 3462: }
! 3463: return str;
! 3464: }
! 3465:
! 3466: static void
! 3467: lt_error_core (int exit_status, const char *mode,
! 3468: const char *message, va_list ap)
! 3469: {
! 3470: fprintf (stderr, "%s: %s: ", program_name, mode);
! 3471: vfprintf (stderr, message, ap);
! 3472: fprintf (stderr, ".\n");
! 3473:
! 3474: if (exit_status >= 0)
! 3475: exit (exit_status);
! 3476: }
! 3477:
! 3478: void
! 3479: lt_fatal (const char *message, ...)
! 3480: {
! 3481: va_list ap;
! 3482: va_start (ap, message);
! 3483: lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
! 3484: va_end (ap);
! 3485: }
! 3486: EOF
! 3487: }
! 3488: # end: func_emit_cwrapperexe_src
! 3489:
! 3490: # func_mode_link arg...
! 3491: func_mode_link ()
! 3492: {
! 3493: $opt_debug
! 3494: case $host in
! 3495: *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
! 3496: # It is impossible to link a dll without this setting, and
! 3497: # we shouldn't force the makefile maintainer to figure out
! 3498: # which system we are compiling for in order to pass an extra
! 3499: # flag for every libtool invocation.
! 3500: # allow_undefined=no
! 3501:
! 3502: # FIXME: Unfortunately, there are problems with the above when trying
! 3503: # to make a dll which has undefined symbols, in which case not
! 3504: # even a static library is built. For now, we need to specify
! 3505: # -no-undefined on the libtool link line when we can be certain
! 3506: # that all symbols are satisfied, otherwise we get a static library.
! 3507: allow_undefined=yes
! 3508: ;;
! 3509: *)
! 3510: allow_undefined=yes
! 3511: ;;
! 3512: esac
! 3513: libtool_args=$nonopt
! 3514: base_compile="$nonopt $@"
! 3515: compile_command=$nonopt
! 3516: finalize_command=$nonopt
! 3517:
! 3518: compile_rpath=
! 3519: finalize_rpath=
! 3520: compile_shlibpath=
! 3521: finalize_shlibpath=
! 3522: convenience=
! 3523: old_convenience=
! 3524: deplibs=
! 3525: old_deplibs=
! 3526: compiler_flags=
! 3527: linker_flags=
! 3528: dllsearchpath=
! 3529: lib_search_path=`pwd`
! 3530: inst_prefix_dir=
! 3531: new_inherited_linker_flags=
! 3532:
! 3533: avoid_version=no
! 3534: dlfiles=
! 3535: dlprefiles=
! 3536: dlself=no
! 3537: export_dynamic=no
! 3538: export_symbols=
! 3539: export_symbols_regex=
! 3540: generated=
! 3541: libobjs=
! 3542: ltlibs=
! 3543: module=no
! 3544: no_install=no
! 3545: objs=
! 3546: non_pic_objects=
! 3547: precious_files_regex=
! 3548: prefer_static_libs=no
! 3549: preload=no
! 3550: prev=
! 3551: prevarg=
! 3552: release=
! 3553: rpath=
! 3554: xrpath=
! 3555: perm_rpath=
! 3556: temp_rpath=
! 3557: thread_safe=no
! 3558: vinfo=
! 3559: vinfo_number=no
! 3560: weak_libs=
! 3561: single_module="${wl}-single_module"
! 3562: func_infer_tag $base_compile
! 3563:
! 3564: # We need to know -static, to get the right output filenames.
! 3565: for arg
! 3566: do
! 3567: case $arg in
! 3568: -shared)
! 3569: test "$build_libtool_libs" != yes && \
! 3570: func_fatal_configuration "can not build a shared library"
! 3571: build_old_libs=no
! 3572: break
! 3573: ;;
! 3574: -all-static | -static | -static-libtool-libs)
! 3575: case $arg in
! 3576: -all-static)
! 3577: if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
! 3578: func_warning "complete static linking is impossible in this configuration"
! 3579: fi
! 3580: if test -n "$link_static_flag"; then
! 3581: dlopen_self=$dlopen_self_static
! 3582: # See comment for -static flag below, for more details.
! 3583: func_append compile_command " $link_static_flag"
! 3584: func_append finalize_command " $link_static_flag"
! 3585: fi
! 3586: prefer_static_libs=yes
! 3587: ;;
! 3588: -static)
! 3589: if test -z "$pic_flag" && test -n "$link_static_flag"; then
! 3590: dlopen_self=$dlopen_self_static
! 3591: fi
! 3592: prefer_static_libs=built
! 3593: ;;
! 3594: -static-libtool-libs)
! 3595: if test -z "$pic_flag" && test -n "$link_static_flag"; then
! 3596: dlopen_self=$dlopen_self_static
! 3597: fi
! 3598: prefer_static_libs=yes
! 3599: ;;
! 3600: esac
! 3601: build_libtool_libs=no
! 3602: build_old_libs=yes
! 3603: break
! 3604: ;;
! 3605: esac
! 3606: done
! 3607:
! 3608: # See if our shared archives depend on static archives.
! 3609: test -n "$old_archive_from_new_cmds" && build_old_libs=yes
! 3610:
! 3611: # Go through the arguments, transforming them on the way.
! 3612: while test "$#" -gt 0; do
! 3613: arg="$1"
! 3614: shift
! 3615: func_quote_for_eval "$arg"
! 3616: qarg=$func_quote_for_eval_unquoted_result
! 3617: func_append libtool_args " $func_quote_for_eval_result"
! 3618:
! 3619: # If the previous option needs an argument, assign it.
! 3620: if test -n "$prev"; then
! 3621: case $prev in
! 3622: output)
! 3623: func_append compile_command " @OUTPUT@"
! 3624: func_append finalize_command " @OUTPUT@"
! 3625: ;;
! 3626: esac
! 3627:
! 3628: case $prev in
! 3629: dlfiles|dlprefiles)
! 3630: if test "$preload" = no; then
! 3631: # Add the symbol object into the linking commands.
! 3632: func_append compile_command " @SYMFILE@"
! 3633: func_append finalize_command " @SYMFILE@"
! 3634: preload=yes
! 3635: fi
! 3636: case $arg in
! 3637: *.la | *.lo) ;; # We handle these cases below.
! 3638: force)
! 3639: if test "$dlself" = no; then
! 3640: dlself=needless
! 3641: export_dynamic=yes
! 3642: fi
! 3643: prev=
! 3644: continue
! 3645: ;;
! 3646: self)
! 3647: if test "$prev" = dlprefiles; then
! 3648: dlself=yes
! 3649: elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
! 3650: dlself=yes
! 3651: else
! 3652: dlself=needless
! 3653: export_dynamic=yes
! 3654: fi
! 3655: prev=
! 3656: continue
! 3657: ;;
! 3658: *)
! 3659: if test "$prev" = dlfiles; then
! 3660: dlfiles="$dlfiles $arg"
! 3661: else
! 3662: dlprefiles="$dlprefiles $arg"
! 3663: fi
! 3664: prev=
! 3665: continue
! 3666: ;;
! 3667: esac
! 3668: ;;
! 3669: expsyms)
! 3670: export_symbols="$arg"
! 3671: test -f "$arg" \
! 3672: || func_fatal_error "symbol file \`$arg' does not exist"
! 3673: prev=
! 3674: continue
! 3675: ;;
! 3676: expsyms_regex)
! 3677: export_symbols_regex="$arg"
! 3678: prev=
! 3679: continue
! 3680: ;;
! 3681: framework)
! 3682: case $host in
! 3683: *-*-darwin*)
! 3684: case "$deplibs " in
! 3685: *" $qarg.ltframework "*) ;;
! 3686: *) deplibs="$deplibs $qarg.ltframework" # this is fixed later
! 3687: ;;
! 3688: esac
! 3689: ;;
! 3690: esac
! 3691: prev=
! 3692: continue
! 3693: ;;
! 3694: inst_prefix)
! 3695: inst_prefix_dir="$arg"
! 3696: prev=
! 3697: continue
! 3698: ;;
! 3699: objectlist)
! 3700: if test -f "$arg"; then
! 3701: save_arg=$arg
! 3702: moreargs=
! 3703: for fil in `cat "$save_arg"`
! 3704: do
! 3705: # moreargs="$moreargs $fil"
! 3706: arg=$fil
! 3707: # A libtool-controlled object.
! 3708:
! 3709: # Check to see that this really is a libtool object.
! 3710: if func_lalib_unsafe_p "$arg"; then
! 3711: pic_object=
! 3712: non_pic_object=
! 3713:
! 3714: # Read the .lo file
! 3715: func_source "$arg"
! 3716:
! 3717: if test -z "$pic_object" ||
! 3718: test -z "$non_pic_object" ||
! 3719: test "$pic_object" = none &&
! 3720: test "$non_pic_object" = none; then
! 3721: func_fatal_error "cannot find name of object for \`$arg'"
! 3722: fi
! 3723:
! 3724: # Extract subdirectory from the argument.
! 3725: func_dirname "$arg" "/" ""
! 3726: xdir="$func_dirname_result"
! 3727:
! 3728: if test "$pic_object" != none; then
! 3729: # Prepend the subdirectory the object is found in.
! 3730: pic_object="$xdir$pic_object"
! 3731:
! 3732: if test "$prev" = dlfiles; then
! 3733: if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
! 3734: dlfiles="$dlfiles $pic_object"
! 3735: prev=
! 3736: continue
! 3737: else
! 3738: # If libtool objects are unsupported, then we need to preload.
! 3739: prev=dlprefiles
! 3740: fi
! 3741: fi
! 3742:
! 3743: # CHECK ME: I think I busted this. -Ossama
! 3744: if test "$prev" = dlprefiles; then
! 3745: # Preload the old-style object.
! 3746: dlprefiles="$dlprefiles $pic_object"
! 3747: prev=
! 3748: fi
! 3749:
! 3750: # A PIC object.
! 3751: func_append libobjs " $pic_object"
! 3752: arg="$pic_object"
! 3753: fi
! 3754:
! 3755: # Non-PIC object.
! 3756: if test "$non_pic_object" != none; then
! 3757: # Prepend the subdirectory the object is found in.
! 3758: non_pic_object="$xdir$non_pic_object"
! 3759:
! 3760: # A standard non-PIC object
! 3761: func_append non_pic_objects " $non_pic_object"
! 3762: if test -z "$pic_object" || test "$pic_object" = none ; then
! 3763: arg="$non_pic_object"
! 3764: fi
! 3765: else
! 3766: # If the PIC object exists, use it instead.
! 3767: # $xdir was prepended to $pic_object above.
! 3768: non_pic_object="$pic_object"
! 3769: func_append non_pic_objects " $non_pic_object"
! 3770: fi
! 3771: else
! 3772: # Only an error if not doing a dry-run.
! 3773: if $opt_dry_run; then
! 3774: # Extract subdirectory from the argument.
! 3775: func_dirname "$arg" "/" ""
! 3776: xdir="$func_dirname_result"
! 3777:
! 3778: func_lo2o "$arg"
! 3779: pic_object=$xdir$objdir/$func_lo2o_result
! 3780: non_pic_object=$xdir$func_lo2o_result
! 3781: func_append libobjs " $pic_object"
! 3782: func_append non_pic_objects " $non_pic_object"
! 3783: else
! 3784: func_fatal_error "\`$arg' is not a valid libtool object"
! 3785: fi
! 3786: fi
! 3787: done
! 3788: else
! 3789: func_fatal_error "link input file \`$arg' does not exist"
! 3790: fi
! 3791: arg=$save_arg
! 3792: prev=
! 3793: continue
! 3794: ;;
! 3795: precious_regex)
! 3796: precious_files_regex="$arg"
! 3797: prev=
! 3798: continue
! 3799: ;;
! 3800: release)
! 3801: release="-$arg"
! 3802: prev=
! 3803: continue
! 3804: ;;
! 3805: rpath | xrpath)
! 3806: # We need an absolute path.
! 3807: case $arg in
! 3808: [\\/]* | [A-Za-z]:[\\/]*) ;;
! 3809: *)
! 3810: func_fatal_error "only absolute run-paths are allowed"
! 3811: ;;
! 3812: esac
! 3813: if test "$prev" = rpath; then
! 3814: case "$rpath " in
! 3815: *" $arg "*) ;;
! 3816: *) rpath="$rpath $arg" ;;
! 3817: esac
! 3818: else
! 3819: case "$xrpath " in
! 3820: *" $arg "*) ;;
! 3821: *) xrpath="$xrpath $arg" ;;
! 3822: esac
! 3823: fi
! 3824: prev=
! 3825: continue
! 3826: ;;
! 3827: shrext)
! 3828: shrext_cmds="$arg"
! 3829: prev=
! 3830: continue
! 3831: ;;
! 3832: weak)
! 3833: weak_libs="$weak_libs $arg"
! 3834: prev=
! 3835: continue
! 3836: ;;
! 3837: xcclinker)
! 3838: linker_flags="$linker_flags $qarg"
! 3839: compiler_flags="$compiler_flags $qarg"
! 3840: prev=
! 3841: func_append compile_command " $qarg"
! 3842: func_append finalize_command " $qarg"
! 3843: continue
! 3844: ;;
! 3845: xcompiler)
! 3846: compiler_flags="$compiler_flags $qarg"
! 3847: prev=
! 3848: func_append compile_command " $qarg"
! 3849: func_append finalize_command " $qarg"
! 3850: continue
! 3851: ;;
! 3852: xlinker)
! 3853: linker_flags="$linker_flags $qarg"
! 3854: compiler_flags="$compiler_flags $wl$qarg"
! 3855: prev=
! 3856: func_append compile_command " $wl$qarg"
! 3857: func_append finalize_command " $wl$qarg"
! 3858: continue
! 3859: ;;
! 3860: *)
! 3861: eval "$prev=\"\$arg\""
! 3862: prev=
! 3863: continue
! 3864: ;;
! 3865: esac
! 3866: fi # test -n "$prev"
! 3867:
! 3868: prevarg="$arg"
! 3869:
! 3870: case $arg in
! 3871: -all-static)
! 3872: # The effects of -all-static are defined in a previous loop.
! 3873: continue
! 3874: ;;
! 3875:
! 3876: -allow-undefined)
! 3877: # FIXME: remove this flag sometime in the future.
! 3878: func_fatal_error "\`-allow-undefined' must not be used because it is the default"
! 3879: ;;
! 3880:
! 3881: -avoid-version)
! 3882: avoid_version=yes
! 3883: continue
! 3884: ;;
! 3885:
! 3886: -dlopen)
! 3887: prev=dlfiles
! 3888: continue
! 3889: ;;
! 3890:
! 3891: -dlpreopen)
! 3892: prev=dlprefiles
! 3893: continue
! 3894: ;;
! 3895:
! 3896: -export-dynamic)
! 3897: export_dynamic=yes
! 3898: continue
! 3899: ;;
! 3900:
! 3901: -export-symbols | -export-symbols-regex)
! 3902: if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
! 3903: func_fatal_error "more than one -exported-symbols argument is not allowed"
! 3904: fi
! 3905: if test "X$arg" = "X-export-symbols"; then
! 3906: prev=expsyms
! 3907: else
! 3908: prev=expsyms_regex
! 3909: fi
! 3910: continue
! 3911: ;;
! 3912:
! 3913: -framework)
! 3914: prev=framework
! 3915: continue
! 3916: ;;
! 3917:
! 3918: -inst-prefix-dir)
! 3919: prev=inst_prefix
! 3920: continue
! 3921: ;;
! 3922:
! 3923: # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
! 3924: # so, if we see these flags be careful not to treat them like -L
! 3925: -L[A-Z][A-Z]*:*)
! 3926: case $with_gcc/$host in
! 3927: no/*-*-irix* | /*-*-irix*)
! 3928: func_append compile_command " $arg"
! 3929: func_append finalize_command " $arg"
! 3930: ;;
! 3931: esac
! 3932: continue
! 3933: ;;
! 3934:
! 3935: -L*)
! 3936: func_stripname '-L' '' "$arg"
! 3937: dir=$func_stripname_result
! 3938: # We need an absolute path.
! 3939: case $dir in
! 3940: [\\/]* | [A-Za-z]:[\\/]*) ;;
! 3941: *)
! 3942: absdir=`cd "$dir" && pwd`
! 3943: test -z "$absdir" && \
! 3944: func_fatal_error "cannot determine absolute directory name of \`$dir'"
! 3945: dir="$absdir"
! 3946: ;;
! 3947: esac
! 3948: case "$deplibs " in
! 3949: *" -L$dir "*) ;;
! 3950: *)
! 3951: deplibs="$deplibs -L$dir"
! 3952: lib_search_path="$lib_search_path $dir"
! 3953: ;;
! 3954: esac
! 3955: case $host in
! 3956: *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
! 3957: testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'`
! 3958: case :$dllsearchpath: in
! 3959: *":$dir:"*) ;;
! 3960: *) dllsearchpath="$dllsearchpath:$dir";;
! 3961: esac
! 3962: case :$dllsearchpath: in
! 3963: *":$testbindir:"*) ;;
! 3964: *) dllsearchpath="$dllsearchpath:$testbindir";;
! 3965: esac
! 3966: ;;
! 3967: esac
! 3968: continue
! 3969: ;;
! 3970:
! 3971: -l*)
! 3972: if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
! 3973: case $host in
! 3974: *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*)
! 3975: # These systems don't actually have a C or math library (as such)
! 3976: continue
! 3977: ;;
! 3978: *-*-os2*)
! 3979: # These systems don't actually have a C library (as such)
! 3980: test "X$arg" = "X-lc" && continue
! 3981: ;;
! 3982: *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
! 3983: # Do not include libc due to us having libc/libc_r.
! 3984: test "X$arg" = "X-lc" && continue
! 3985: ;;
! 3986: *-*-rhapsody* | *-*-darwin1.[012])
! 3987: # Rhapsody C and math libraries are in the System framework
! 3988: deplibs="$deplibs System.ltframework"
! 3989: continue
! 3990: ;;
! 3991: *-*-sco3.2v5* | *-*-sco5v6*)
! 3992: # Causes problems with __ctype
! 3993: test "X$arg" = "X-lc" && continue
! 3994: ;;
! 3995: *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
! 3996: # Compiler inserts libc in the correct place for threads to work
! 3997: test "X$arg" = "X-lc" && continue
! 3998: ;;
! 3999: esac
! 4000: elif test "X$arg" = "X-lc_r"; then
! 4001: case $host in
! 4002: *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
! 4003: # Do not include libc_r directly, use -pthread flag.
! 4004: continue
! 4005: ;;
! 4006: esac
! 4007: fi
! 4008: deplibs="$deplibs $arg"
! 4009: continue
! 4010: ;;
! 4011:
! 4012: -module)
! 4013: module=yes
! 4014: continue
! 4015: ;;
! 4016:
! 4017: # Tru64 UNIX uses -model [arg] to determine the layout of C++
! 4018: # classes, name mangling, and exception handling.
! 4019: # Darwin uses the -arch flag to determine output architecture.
! 4020: -model|-arch|-isysroot)
! 4021: compiler_flags="$compiler_flags $arg"
! 4022: func_append compile_command " $arg"
! 4023: func_append finalize_command " $arg"
! 4024: prev=xcompiler
! 4025: continue
! 4026: ;;
! 4027:
! 4028: -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
! 4029: compiler_flags="$compiler_flags $arg"
! 4030: func_append compile_command " $arg"
! 4031: func_append finalize_command " $arg"
! 4032: case "$new_inherited_linker_flags " in
! 4033: *" $arg "*) ;;
! 4034: * ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;;
! 4035: esac
! 4036: continue
! 4037: ;;
! 4038:
! 4039: -multi_module)
! 4040: single_module="${wl}-multi_module"
! 4041: continue
! 4042: ;;
! 4043:
! 4044: -no-fast-install)
! 4045: fast_install=no
! 4046: continue
! 4047: ;;
! 4048:
! 4049: -no-install)
! 4050: case $host in
! 4051: *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin*)
! 4052: # The PATH hackery in wrapper scripts is required on Windows
! 4053: # and Darwin in order for the loader to find any dlls it needs.
! 4054: func_warning "\`-no-install' is ignored for $host"
! 4055: func_warning "assuming \`-no-fast-install' instead"
! 4056: fast_install=no
! 4057: ;;
! 4058: *) no_install=yes ;;
! 4059: esac
! 4060: continue
! 4061: ;;
! 4062:
! 4063: -no-undefined)
! 4064: allow_undefined=no
! 4065: continue
! 4066: ;;
! 4067:
! 4068: -objectlist)
! 4069: prev=objectlist
! 4070: continue
! 4071: ;;
! 4072:
! 4073: -o) prev=output ;;
! 4074:
! 4075: -precious-files-regex)
! 4076: prev=precious_regex
! 4077: continue
! 4078: ;;
! 4079:
! 4080: -release)
! 4081: prev=release
! 4082: continue
! 4083: ;;
! 4084:
! 4085: -rpath)
! 4086: prev=rpath
! 4087: continue
! 4088: ;;
! 4089:
! 4090: -R)
! 4091: prev=xrpath
! 4092: continue
! 4093: ;;
! 4094:
! 4095: -R*)
! 4096: func_stripname '-R' '' "$arg"
! 4097: dir=$func_stripname_result
! 4098: # We need an absolute path.
! 4099: case $dir in
! 4100: [\\/]* | [A-Za-z]:[\\/]*) ;;
! 4101: *)
! 4102: func_fatal_error "only absolute run-paths are allowed"
! 4103: ;;
! 4104: esac
! 4105: case "$xrpath " in
! 4106: *" $dir "*) ;;
! 4107: *) xrpath="$xrpath $dir" ;;
! 4108: esac
! 4109: continue
! 4110: ;;
! 4111:
! 4112: -shared)
! 4113: # The effects of -shared are defined in a previous loop.
! 4114: continue
! 4115: ;;
! 4116:
! 4117: -shrext)
! 4118: prev=shrext
! 4119: continue
! 4120: ;;
! 4121:
! 4122: -static | -static-libtool-libs)
! 4123: # The effects of -static are defined in a previous loop.
! 4124: # We used to do the same as -all-static on platforms that
! 4125: # didn't have a PIC flag, but the assumption that the effects
! 4126: # would be equivalent was wrong. It would break on at least
! 4127: # Digital Unix and AIX.
! 4128: continue
! 4129: ;;
! 4130:
! 4131: -thread-safe)
! 4132: thread_safe=yes
! 4133: continue
! 4134: ;;
! 4135:
! 4136: -version-info)
! 4137: prev=vinfo
! 4138: continue
! 4139: ;;
! 4140:
! 4141: -version-number)
! 4142: prev=vinfo
! 4143: vinfo_number=yes
! 4144: continue
! 4145: ;;
! 4146:
! 4147: -weak)
! 4148: prev=weak
! 4149: continue
! 4150: ;;
! 4151:
! 4152: -Wc,*)
! 4153: func_stripname '-Wc,' '' "$arg"
! 4154: args=$func_stripname_result
! 4155: arg=
! 4156: save_ifs="$IFS"; IFS=','
! 4157: for flag in $args; do
! 4158: IFS="$save_ifs"
! 4159: func_quote_for_eval "$flag"
! 4160: arg="$arg $wl$func_quote_for_eval_result"
! 4161: compiler_flags="$compiler_flags $func_quote_for_eval_result"
! 4162: done
! 4163: IFS="$save_ifs"
! 4164: func_stripname ' ' '' "$arg"
! 4165: arg=$func_stripname_result
! 4166: ;;
! 4167:
! 4168: -Wl,*)
! 4169: func_stripname '-Wl,' '' "$arg"
! 4170: args=$func_stripname_result
! 4171: arg=
! 4172: save_ifs="$IFS"; IFS=','
! 4173: for flag in $args; do
! 4174: IFS="$save_ifs"
! 4175: func_quote_for_eval "$flag"
! 4176: arg="$arg $wl$func_quote_for_eval_result"
! 4177: compiler_flags="$compiler_flags $wl$func_quote_for_eval_result"
! 4178: linker_flags="$linker_flags $func_quote_for_eval_result"
! 4179: done
! 4180: IFS="$save_ifs"
! 4181: func_stripname ' ' '' "$arg"
! 4182: arg=$func_stripname_result
! 4183: ;;
! 4184:
! 4185: -Xcompiler)
! 4186: prev=xcompiler
! 4187: continue
! 4188: ;;
! 4189:
! 4190: -Xlinker)
! 4191: prev=xlinker
! 4192: continue
! 4193: ;;
! 4194:
! 4195: -XCClinker)
! 4196: prev=xcclinker
! 4197: continue
! 4198: ;;
! 4199:
! 4200: # -msg_* for osf cc
! 4201: -msg_*)
! 4202: func_quote_for_eval "$arg"
! 4203: arg="$func_quote_for_eval_result"
! 4204: ;;
! 4205:
! 4206: # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
! 4207: # -r[0-9][0-9]* specifies the processor on the SGI compiler
! 4208: # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
! 4209: # +DA*, +DD* enable 64-bit mode on the HP compiler
! 4210: # -q* pass through compiler args for the IBM compiler
! 4211: # -m*, -t[45]*, -txscale* pass through architecture-specific
! 4212: # compiler args for GCC
! 4213: # -F/path gives path to uninstalled frameworks, gcc on darwin
! 4214: # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC
! 4215: # @file GCC response files
! 4216: -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
! 4217: -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*)
! 4218: func_quote_for_eval "$arg"
! 4219: arg="$func_quote_for_eval_result"
! 4220: func_append compile_command " $arg"
! 4221: func_append finalize_command " $arg"
! 4222: compiler_flags="$compiler_flags $arg"
! 4223: continue
! 4224: ;;
! 4225:
! 4226: # Some other compiler flag.
! 4227: -* | +*)
! 4228: func_quote_for_eval "$arg"
! 4229: arg="$func_quote_for_eval_result"
! 4230: ;;
! 4231:
! 4232: *.$objext)
! 4233: # A standard object.
! 4234: objs="$objs $arg"
! 4235: ;;
! 4236:
! 4237: *.lo)
! 4238: # A libtool-controlled object.
! 4239:
! 4240: # Check to see that this really is a libtool object.
! 4241: if func_lalib_unsafe_p "$arg"; then
! 4242: pic_object=
! 4243: non_pic_object=
! 4244:
! 4245: # Read the .lo file
! 4246: func_source "$arg"
! 4247:
! 4248: if test -z "$pic_object" ||
! 4249: test -z "$non_pic_object" ||
! 4250: test "$pic_object" = none &&
! 4251: test "$non_pic_object" = none; then
! 4252: func_fatal_error "cannot find name of object for \`$arg'"
! 4253: fi
! 4254:
! 4255: # Extract subdirectory from the argument.
! 4256: func_dirname "$arg" "/" ""
! 4257: xdir="$func_dirname_result"
! 4258:
! 4259: if test "$pic_object" != none; then
! 4260: # Prepend the subdirectory the object is found in.
! 4261: pic_object="$xdir$pic_object"
! 4262:
! 4263: if test "$prev" = dlfiles; then
! 4264: if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
! 4265: dlfiles="$dlfiles $pic_object"
! 4266: prev=
! 4267: continue
! 4268: else
! 4269: # If libtool objects are unsupported, then we need to preload.
! 4270: prev=dlprefiles
! 4271: fi
! 4272: fi
! 4273:
! 4274: # CHECK ME: I think I busted this. -Ossama
! 4275: if test "$prev" = dlprefiles; then
! 4276: # Preload the old-style object.
! 4277: dlprefiles="$dlprefiles $pic_object"
! 4278: prev=
! 4279: fi
! 4280:
! 4281: # A PIC object.
! 4282: func_append libobjs " $pic_object"
! 4283: arg="$pic_object"
! 4284: fi
! 4285:
! 4286: # Non-PIC object.
! 4287: if test "$non_pic_object" != none; then
! 4288: # Prepend the subdirectory the object is found in.
! 4289: non_pic_object="$xdir$non_pic_object"
! 4290:
! 4291: # A standard non-PIC object
! 4292: func_append non_pic_objects " $non_pic_object"
! 4293: if test -z "$pic_object" || test "$pic_object" = none ; then
! 4294: arg="$non_pic_object"
! 4295: fi
! 4296: else
! 4297: # If the PIC object exists, use it instead.
! 4298: # $xdir was prepended to $pic_object above.
! 4299: non_pic_object="$pic_object"
! 4300: func_append non_pic_objects " $non_pic_object"
! 4301: fi
! 4302: else
! 4303: # Only an error if not doing a dry-run.
! 4304: if $opt_dry_run; then
! 4305: # Extract subdirectory from the argument.
! 4306: func_dirname "$arg" "/" ""
! 4307: xdir="$func_dirname_result"
! 4308:
! 4309: func_lo2o "$arg"
! 4310: pic_object=$xdir$objdir/$func_lo2o_result
! 4311: non_pic_object=$xdir$func_lo2o_result
! 4312: func_append libobjs " $pic_object"
! 4313: func_append non_pic_objects " $non_pic_object"
! 4314: else
! 4315: func_fatal_error "\`$arg' is not a valid libtool object"
! 4316: fi
! 4317: fi
! 4318: ;;
! 4319:
! 4320: *.$libext)
! 4321: # An archive.
! 4322: deplibs="$deplibs $arg"
! 4323: old_deplibs="$old_deplibs $arg"
! 4324: continue
! 4325: ;;
! 4326:
! 4327: *.la)
! 4328: # A libtool-controlled library.
! 4329:
! 4330: if test "$prev" = dlfiles; then
! 4331: # This library was specified with -dlopen.
! 4332: dlfiles="$dlfiles $arg"
! 4333: prev=
! 4334: elif test "$prev" = dlprefiles; then
! 4335: # The library was specified with -dlpreopen.
! 4336: dlprefiles="$dlprefiles $arg"
! 4337: prev=
! 4338: else
! 4339: deplibs="$deplibs $arg"
! 4340: fi
! 4341: continue
! 4342: ;;
! 4343:
! 4344: # Some other compiler argument.
! 4345: *)
! 4346: # Unknown arguments in both finalize_command and compile_command need
! 4347: # to be aesthetically quoted because they are evaled later.
! 4348: func_quote_for_eval "$arg"
! 4349: arg="$func_quote_for_eval_result"
! 4350: ;;
! 4351: esac # arg
! 4352:
! 4353: # Now actually substitute the argument into the commands.
! 4354: if test -n "$arg"; then
! 4355: func_append compile_command " $arg"
! 4356: func_append finalize_command " $arg"
! 4357: fi
! 4358: done # argument parsing loop
! 4359:
! 4360: test -n "$prev" && \
! 4361: func_fatal_help "the \`$prevarg' option requires an argument"
! 4362:
! 4363: if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
! 4364: eval arg=\"$export_dynamic_flag_spec\"
! 4365: func_append compile_command " $arg"
! 4366: func_append finalize_command " $arg"
! 4367: fi
! 4368:
! 4369: oldlibs=
! 4370: # calculate the name of the file, without its directory
! 4371: func_basename "$output"
! 4372: outputname="$func_basename_result"
! 4373: libobjs_save="$libobjs"
! 4374:
! 4375: if test -n "$shlibpath_var"; then
! 4376: # get the directories listed in $shlibpath_var
! 4377: eval shlib_search_path=\`\$ECHO \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
! 4378: else
! 4379: shlib_search_path=
! 4380: fi
! 4381: eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
! 4382: eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
! 4383:
! 4384: func_dirname "$output" "/" ""
! 4385: output_objdir="$func_dirname_result$objdir"
! 4386: # Create the object directory.
! 4387: func_mkdir_p "$output_objdir"
! 4388:
! 4389: # Determine the type of output
! 4390: case $output in
! 4391: "")
! 4392: func_fatal_help "you must specify an output file"
! 4393: ;;
! 4394: *.$libext) linkmode=oldlib ;;
! 4395: *.lo | *.$objext) linkmode=obj ;;
! 4396: *.la) linkmode=lib ;;
! 4397: *) linkmode=prog ;; # Anything else should be a program.
! 4398: esac
! 4399:
! 4400: specialdeplibs=
! 4401:
! 4402: libs=
! 4403: # Find all interdependent deplibs by searching for libraries
! 4404: # that are linked more than once (e.g. -la -lb -la)
! 4405: for deplib in $deplibs; do
! 4406: if $opt_duplicate_deps ; then
! 4407: case "$libs " in
! 4408: *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
! 4409: esac
! 4410: fi
! 4411: libs="$libs $deplib"
! 4412: done
! 4413:
! 4414: if test "$linkmode" = lib; then
! 4415: libs="$predeps $libs $compiler_lib_search_path $postdeps"
! 4416:
! 4417: # Compute libraries that are listed more than once in $predeps
! 4418: # $postdeps and mark them as special (i.e., whose duplicates are
! 4419: # not to be eliminated).
! 4420: pre_post_deps=
! 4421: if $opt_duplicate_compiler_generated_deps; then
! 4422: for pre_post_dep in $predeps $postdeps; do
! 4423: case "$pre_post_deps " in
! 4424: *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
! 4425: esac
! 4426: pre_post_deps="$pre_post_deps $pre_post_dep"
! 4427: done
! 4428: fi
! 4429: pre_post_deps=
! 4430: fi
! 4431:
! 4432: deplibs=
! 4433: newdependency_libs=
! 4434: newlib_search_path=
! 4435: need_relink=no # whether we're linking any uninstalled libtool libraries
! 4436: notinst_deplibs= # not-installed libtool libraries
! 4437: notinst_path= # paths that contain not-installed libtool libraries
! 4438:
! 4439: case $linkmode in
! 4440: lib)
! 4441: passes="conv dlpreopen link"
! 4442: for file in $dlfiles $dlprefiles; do
! 4443: case $file in
! 4444: *.la) ;;
! 4445: *)
! 4446: func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file"
! 4447: ;;
! 4448: esac
! 4449: done
! 4450: ;;
! 4451: prog)
! 4452: compile_deplibs=
! 4453: finalize_deplibs=
! 4454: alldeplibs=no
! 4455: newdlfiles=
! 4456: newdlprefiles=
! 4457: passes="conv scan dlopen dlpreopen link"
! 4458: ;;
! 4459: *) passes="conv"
! 4460: ;;
! 4461: esac
! 4462:
! 4463: for pass in $passes; do
! 4464: # The preopen pass in lib mode reverses $deplibs; put it back here
! 4465: # so that -L comes before libs that need it for instance...
! 4466: if test "$linkmode,$pass" = "lib,link"; then
! 4467: ## FIXME: Find the place where the list is rebuilt in the wrong
! 4468: ## order, and fix it there properly
! 4469: tmp_deplibs=
! 4470: for deplib in $deplibs; do
! 4471: tmp_deplibs="$deplib $tmp_deplibs"
! 4472: done
! 4473: deplibs="$tmp_deplibs"
! 4474: fi
! 4475:
! 4476: if test "$linkmode,$pass" = "lib,link" ||
! 4477: test "$linkmode,$pass" = "prog,scan"; then
! 4478: libs="$deplibs"
! 4479: deplibs=
! 4480: fi
! 4481: if test "$linkmode" = prog; then
! 4482: case $pass in
! 4483: dlopen) libs="$dlfiles" ;;
! 4484: dlpreopen) libs="$dlprefiles" ;;
! 4485: link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
! 4486: esac
! 4487: fi
! 4488: if test "$linkmode,$pass" = "lib,dlpreopen"; then
! 4489: # Collect and forward deplibs of preopened libtool libs
! 4490: for lib in $dlprefiles; do
! 4491: # Ignore non-libtool-libs
! 4492: dependency_libs=
! 4493: case $lib in
! 4494: *.la) func_source "$lib" ;;
! 4495: esac
! 4496:
! 4497: # Collect preopened libtool deplibs, except any this library
! 4498: # has declared as weak libs
! 4499: for deplib in $dependency_libs; do
! 4500: deplib_base=`$ECHO "X$deplib" | $Xsed -e "$basename"`
! 4501: case " $weak_libs " in
! 4502: *" $deplib_base "*) ;;
! 4503: *) deplibs="$deplibs $deplib" ;;
! 4504: esac
! 4505: done
! 4506: done
! 4507: libs="$dlprefiles"
! 4508: fi
! 4509: if test "$pass" = dlopen; then
! 4510: # Collect dlpreopened libraries
! 4511: save_deplibs="$deplibs"
! 4512: deplibs=
! 4513: fi
! 4514:
! 4515: for deplib in $libs; do
! 4516: lib=
! 4517: found=no
! 4518: case $deplib in
! 4519: -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
! 4520: if test "$linkmode,$pass" = "prog,link"; then
! 4521: compile_deplibs="$deplib $compile_deplibs"
! 4522: finalize_deplibs="$deplib $finalize_deplibs"
! 4523: else
! 4524: compiler_flags="$compiler_flags $deplib"
! 4525: if test "$linkmode" = lib ; then
! 4526: case "$new_inherited_linker_flags " in
! 4527: *" $deplib "*) ;;
! 4528: * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
! 4529: esac
! 4530: fi
! 4531: fi
! 4532: continue
! 4533: ;;
! 4534: -l*)
! 4535: if test "$linkmode" != lib && test "$linkmode" != prog; then
! 4536: func_warning "\`-l' is ignored for archives/objects"
! 4537: continue
! 4538: fi
! 4539: func_stripname '-l' '' "$deplib"
! 4540: name=$func_stripname_result
! 4541: if test "$linkmode" = lib; then
! 4542: searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
! 4543: else
! 4544: searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
! 4545: fi
! 4546: for searchdir in $searchdirs; do
! 4547: for search_ext in .la $std_shrext .so .a; do
! 4548: # Search the libtool library
! 4549: lib="$searchdir/lib${name}${search_ext}"
! 4550: if test -f "$lib"; then
! 4551: if test "$search_ext" = ".la"; then
! 4552: found=yes
! 4553: else
! 4554: found=no
! 4555: fi
! 4556: break 2
! 4557: fi
! 4558: done
! 4559: done
! 4560: if test "$found" != yes; then
! 4561: # deplib doesn't seem to be a libtool library
! 4562: if test "$linkmode,$pass" = "prog,link"; then
! 4563: compile_deplibs="$deplib $compile_deplibs"
! 4564: finalize_deplibs="$deplib $finalize_deplibs"
! 4565: else
! 4566: deplibs="$deplib $deplibs"
! 4567: test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
! 4568: fi
! 4569: continue
! 4570: else # deplib is a libtool library
! 4571: # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
! 4572: # We need to do some special things here, and not later.
! 4573: if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
! 4574: case " $predeps $postdeps " in
! 4575: *" $deplib "*)
! 4576: if func_lalib_p "$lib"; then
! 4577: library_names=
! 4578: old_library=
! 4579: func_source "$lib"
! 4580: for l in $old_library $library_names; do
! 4581: ll="$l"
! 4582: done
! 4583: if test "X$ll" = "X$old_library" ; then # only static version available
! 4584: found=no
! 4585: func_dirname "$lib" "" "."
! 4586: ladir="$func_dirname_result"
! 4587: lib=$ladir/$old_library
! 4588: if test "$linkmode,$pass" = "prog,link"; then
! 4589: compile_deplibs="$deplib $compile_deplibs"
! 4590: finalize_deplibs="$deplib $finalize_deplibs"
! 4591: else
! 4592: deplibs="$deplib $deplibs"
! 4593: test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
! 4594: fi
! 4595: continue
! 4596: fi
! 4597: fi
! 4598: ;;
! 4599: *) ;;
! 4600: esac
! 4601: fi
! 4602: fi
! 4603: ;; # -l
! 4604: *.ltframework)
! 4605: if test "$linkmode,$pass" = "prog,link"; then
! 4606: compile_deplibs="$deplib $compile_deplibs"
! 4607: finalize_deplibs="$deplib $finalize_deplibs"
! 4608: else
! 4609: deplibs="$deplib $deplibs"
! 4610: if test "$linkmode" = lib ; then
! 4611: case "$new_inherited_linker_flags " in
! 4612: *" $deplib "*) ;;
! 4613: * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
! 4614: esac
! 4615: fi
! 4616: fi
! 4617: continue
! 4618: ;;
! 4619: -L*)
! 4620: case $linkmode in
! 4621: lib)
! 4622: deplibs="$deplib $deplibs"
! 4623: test "$pass" = conv && continue
! 4624: newdependency_libs="$deplib $newdependency_libs"
! 4625: func_stripname '-L' '' "$deplib"
! 4626: newlib_search_path="$newlib_search_path $func_stripname_result"
! 4627: ;;
! 4628: prog)
! 4629: if test "$pass" = conv; then
! 4630: deplibs="$deplib $deplibs"
! 4631: continue
! 4632: fi
! 4633: if test "$pass" = scan; then
! 4634: deplibs="$deplib $deplibs"
! 4635: else
! 4636: compile_deplibs="$deplib $compile_deplibs"
! 4637: finalize_deplibs="$deplib $finalize_deplibs"
! 4638: fi
! 4639: func_stripname '-L' '' "$deplib"
! 4640: newlib_search_path="$newlib_search_path $func_stripname_result"
! 4641: ;;
! 4642: *)
! 4643: func_warning "\`-L' is ignored for archives/objects"
! 4644: ;;
! 4645: esac # linkmode
! 4646: continue
! 4647: ;; # -L
! 4648: -R*)
! 4649: if test "$pass" = link; then
! 4650: func_stripname '-R' '' "$deplib"
! 4651: dir=$func_stripname_result
! 4652: # Make sure the xrpath contains only unique directories.
! 4653: case "$xrpath " in
! 4654: *" $dir "*) ;;
! 4655: *) xrpath="$xrpath $dir" ;;
! 4656: esac
! 4657: fi
! 4658: deplibs="$deplib $deplibs"
! 4659: continue
! 4660: ;;
! 4661: *.la) lib="$deplib" ;;
! 4662: *.$libext)
! 4663: if test "$pass" = conv; then
! 4664: deplibs="$deplib $deplibs"
! 4665: continue
! 4666: fi
! 4667: case $linkmode in
! 4668: lib)
! 4669: # Linking convenience modules into shared libraries is allowed,
! 4670: # but linking other static libraries is non-portable.
! 4671: case " $dlpreconveniencelibs " in
! 4672: *" $deplib "*) ;;
! 4673: *)
! 4674: valid_a_lib=no
! 4675: case $deplibs_check_method in
! 4676: match_pattern*)
! 4677: set dummy $deplibs_check_method; shift
! 4678: match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
! 4679: if eval "\$ECHO \"X$deplib\"" 2>/dev/null | $Xsed -e 10q \
! 4680: | $EGREP "$match_pattern_regex" > /dev/null; then
! 4681: valid_a_lib=yes
! 4682: fi
! 4683: ;;
! 4684: pass_all)
! 4685: valid_a_lib=yes
! 4686: ;;
! 4687: esac
! 4688: if test "$valid_a_lib" != yes; then
! 4689: $ECHO
! 4690: $ECHO "*** Warning: Trying to link with static lib archive $deplib."
! 4691: $ECHO "*** I have the capability to make that library automatically link in when"
! 4692: $ECHO "*** you link to this library. But I can only do this if you have a"
! 4693: $ECHO "*** shared version of the library, which you do not appear to have"
! 4694: $ECHO "*** because the file extensions .$libext of this argument makes me believe"
! 4695: $ECHO "*** that it is just a static archive that I should not use here."
! 4696: else
! 4697: $ECHO
! 4698: $ECHO "*** Warning: Linking the shared library $output against the"
! 4699: $ECHO "*** static library $deplib is not portable!"
! 4700: deplibs="$deplib $deplibs"
! 4701: fi
! 4702: ;;
! 4703: esac
! 4704: continue
! 4705: ;;
! 4706: prog)
! 4707: if test "$pass" != link; then
! 4708: deplibs="$deplib $deplibs"
! 4709: else
! 4710: compile_deplibs="$deplib $compile_deplibs"
! 4711: finalize_deplibs="$deplib $finalize_deplibs"
! 4712: fi
! 4713: continue
! 4714: ;;
! 4715: esac # linkmode
! 4716: ;; # *.$libext
! 4717: *.lo | *.$objext)
! 4718: if test "$pass" = conv; then
! 4719: deplibs="$deplib $deplibs"
! 4720: elif test "$linkmode" = prog; then
! 4721: if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
! 4722: # If there is no dlopen support or we're linking statically,
! 4723: # we need to preload.
! 4724: newdlprefiles="$newdlprefiles $deplib"
! 4725: compile_deplibs="$deplib $compile_deplibs"
! 4726: finalize_deplibs="$deplib $finalize_deplibs"
! 4727: else
! 4728: newdlfiles="$newdlfiles $deplib"
! 4729: fi
! 4730: fi
! 4731: continue
! 4732: ;;
! 4733: %DEPLIBS%)
! 4734: alldeplibs=yes
! 4735: continue
! 4736: ;;
! 4737: esac # case $deplib
! 4738:
! 4739: if test "$found" = yes || test -f "$lib"; then :
! 4740: else
! 4741: func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'"
! 4742: fi
! 4743:
! 4744: # Check to see that this really is a libtool archive.
! 4745: func_lalib_unsafe_p "$lib" \
! 4746: || func_fatal_error "\`$lib' is not a valid libtool archive"
! 4747:
! 4748: func_dirname "$lib" "" "."
! 4749: ladir="$func_dirname_result"
! 4750:
! 4751: dlname=
! 4752: dlopen=
! 4753: dlpreopen=
! 4754: libdir=
! 4755: library_names=
! 4756: old_library=
! 4757: inherited_linker_flags=
! 4758: # If the library was installed with an old release of libtool,
! 4759: # it will not redefine variables installed, or shouldnotlink
! 4760: installed=yes
! 4761: shouldnotlink=no
! 4762: avoidtemprpath=
! 4763:
! 4764:
! 4765: # Read the .la file
! 4766: func_source "$lib"
! 4767:
! 4768: # Convert "-framework foo" to "foo.ltframework"
! 4769: if test -n "$inherited_linker_flags"; then
! 4770: tmp_inherited_linker_flags=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'`
! 4771: for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
! 4772: case " $new_inherited_linker_flags " in
! 4773: *" $tmp_inherited_linker_flag "*) ;;
! 4774: *) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";;
! 4775: esac
! 4776: done
! 4777: fi
! 4778: dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
! 4779: if test "$linkmode,$pass" = "lib,link" ||
! 4780: test "$linkmode,$pass" = "prog,scan" ||
! 4781: { test "$linkmode" != prog && test "$linkmode" != lib; }; then
! 4782: test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
! 4783: test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
! 4784: fi
! 4785:
! 4786: if test "$pass" = conv; then
! 4787: # Only check for convenience libraries
! 4788: deplibs="$lib $deplibs"
! 4789: if test -z "$libdir"; then
! 4790: if test -z "$old_library"; then
! 4791: func_fatal_error "cannot find name of link library for \`$lib'"
! 4792: fi
! 4793: # It is a libtool convenience library, so add in its objects.
! 4794: convenience="$convenience $ladir/$objdir/$old_library"
! 4795: old_convenience="$old_convenience $ladir/$objdir/$old_library"
! 4796: elif test "$linkmode" != prog && test "$linkmode" != lib; then
! 4797: func_fatal_error "\`$lib' is not a convenience library"
! 4798: fi
! 4799: tmp_libs=
! 4800: for deplib in $dependency_libs; do
! 4801: deplibs="$deplib $deplibs"
! 4802: if $opt_duplicate_deps ; then
! 4803: case "$tmp_libs " in
! 4804: *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
! 4805: esac
! 4806: fi
! 4807: tmp_libs="$tmp_libs $deplib"
! 4808: done
! 4809: continue
! 4810: fi # $pass = conv
! 4811:
! 4812:
! 4813: # Get the name of the library we link against.
! 4814: linklib=
! 4815: for l in $old_library $library_names; do
! 4816: linklib="$l"
! 4817: done
! 4818: if test -z "$linklib"; then
! 4819: func_fatal_error "cannot find name of link library for \`$lib'"
! 4820: fi
! 4821:
! 4822: # This library was specified with -dlopen.
! 4823: if test "$pass" = dlopen; then
! 4824: if test -z "$libdir"; then
! 4825: func_fatal_error "cannot -dlopen a convenience library: \`$lib'"
! 4826: fi
! 4827: if test -z "$dlname" ||
! 4828: test "$dlopen_support" != yes ||
! 4829: test "$build_libtool_libs" = no; then
! 4830: # If there is no dlname, no dlopen support or we're linking
! 4831: # statically, we need to preload. We also need to preload any
! 4832: # dependent libraries so libltdl's deplib preloader doesn't
! 4833: # bomb out in the load deplibs phase.
! 4834: dlprefiles="$dlprefiles $lib $dependency_libs"
! 4835: else
! 4836: newdlfiles="$newdlfiles $lib"
! 4837: fi
! 4838: continue
! 4839: fi # $pass = dlopen
! 4840:
! 4841: # We need an absolute path.
! 4842: case $ladir in
! 4843: [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
! 4844: *)
! 4845: abs_ladir=`cd "$ladir" && pwd`
! 4846: if test -z "$abs_ladir"; then
! 4847: func_warning "cannot determine absolute directory name of \`$ladir'"
! 4848: func_warning "passing it literally to the linker, although it might fail"
! 4849: abs_ladir="$ladir"
! 4850: fi
! 4851: ;;
! 4852: esac
! 4853: func_basename "$lib"
! 4854: laname="$func_basename_result"
! 4855:
! 4856: # Find the relevant object directory and library name.
! 4857: if test "X$installed" = Xyes; then
! 4858: if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
! 4859: func_warning "library \`$lib' was moved."
! 4860: dir="$ladir"
! 4861: absdir="$abs_ladir"
! 4862: libdir="$abs_ladir"
! 4863: else
! 4864: dir="$libdir"
! 4865: absdir="$libdir"
! 4866: fi
! 4867: test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
! 4868: else
! 4869: if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
! 4870: dir="$ladir"
! 4871: absdir="$abs_ladir"
! 4872: # Remove this search path later
! 4873: notinst_path="$notinst_path $abs_ladir"
! 4874: else
! 4875: dir="$ladir/$objdir"
! 4876: absdir="$abs_ladir/$objdir"
! 4877: # Remove this search path later
! 4878: notinst_path="$notinst_path $abs_ladir"
! 4879: fi
! 4880: fi # $installed = yes
! 4881: func_stripname 'lib' '.la' "$laname"
! 4882: name=$func_stripname_result
! 4883:
! 4884: # This library was specified with -dlpreopen.
! 4885: if test "$pass" = dlpreopen; then
! 4886: if test -z "$libdir" && test "$linkmode" = prog; then
! 4887: func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
! 4888: fi
! 4889: # Prefer using a static library (so that no silly _DYNAMIC symbols
! 4890: # are required to link).
! 4891: if test -n "$old_library"; then
! 4892: newdlprefiles="$newdlprefiles $dir/$old_library"
! 4893: # Keep a list of preopened convenience libraries to check
! 4894: # that they are being used correctly in the link pass.
! 4895: test -z "$libdir" && \
! 4896: dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library"
! 4897: # Otherwise, use the dlname, so that lt_dlopen finds it.
! 4898: elif test -n "$dlname"; then
! 4899: newdlprefiles="$newdlprefiles $dir/$dlname"
! 4900: else
! 4901: newdlprefiles="$newdlprefiles $dir/$linklib"
! 4902: fi
! 4903: fi # $pass = dlpreopen
! 4904:
! 4905: if test -z "$libdir"; then
! 4906: # Link the convenience library
! 4907: if test "$linkmode" = lib; then
! 4908: deplibs="$dir/$old_library $deplibs"
! 4909: elif test "$linkmode,$pass" = "prog,link"; then
! 4910: compile_deplibs="$dir/$old_library $compile_deplibs"
! 4911: finalize_deplibs="$dir/$old_library $finalize_deplibs"
! 4912: else
! 4913: deplibs="$lib $deplibs" # used for prog,scan pass
! 4914: fi
! 4915: continue
! 4916: fi
! 4917:
! 4918:
! 4919: if test "$linkmode" = prog && test "$pass" != link; then
! 4920: newlib_search_path="$newlib_search_path $ladir"
! 4921: deplibs="$lib $deplibs"
! 4922:
! 4923: linkalldeplibs=no
! 4924: if test "$link_all_deplibs" != no || test -z "$library_names" ||
! 4925: test "$build_libtool_libs" = no; then
! 4926: linkalldeplibs=yes
! 4927: fi
! 4928:
! 4929: tmp_libs=
! 4930: for deplib in $dependency_libs; do
! 4931: case $deplib in
! 4932: -L*) func_stripname '-L' '' "$deplib"
! 4933: newlib_search_path="$newlib_search_path $func_stripname_result"
! 4934: ;;
! 4935: esac
! 4936: # Need to link against all dependency_libs?
! 4937: if test "$linkalldeplibs" = yes; then
! 4938: deplibs="$deplib $deplibs"
! 4939: else
! 4940: # Need to hardcode shared library paths
! 4941: # or/and link against static libraries
! 4942: newdependency_libs="$deplib $newdependency_libs"
! 4943: fi
! 4944: if $opt_duplicate_deps ; then
! 4945: case "$tmp_libs " in
! 4946: *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
! 4947: esac
! 4948: fi
! 4949: tmp_libs="$tmp_libs $deplib"
! 4950: done # for deplib
! 4951: continue
! 4952: fi # $linkmode = prog...
! 4953:
! 4954: if test "$linkmode,$pass" = "prog,link"; then
! 4955: if test -n "$library_names" &&
! 4956: { { test "$prefer_static_libs" = no ||
! 4957: test "$prefer_static_libs,$installed" = "built,yes"; } ||
! 4958: test -z "$old_library"; }; then
! 4959: # We need to hardcode the library path
! 4960: if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
! 4961: # Make sure the rpath contains only unique directories.
! 4962: case "$temp_rpath:" in
! 4963: *"$absdir:"*) ;;
! 4964: *) temp_rpath="$temp_rpath$absdir:" ;;
! 4965: esac
! 4966: fi
! 4967:
! 4968: # Hardcode the library path.
! 4969: # Skip directories that are in the system default run-time
! 4970: # search path.
! 4971: case " $sys_lib_dlsearch_path " in
! 4972: *" $absdir "*) ;;
! 4973: *)
! 4974: case "$compile_rpath " in
! 4975: *" $absdir "*) ;;
! 4976: *) compile_rpath="$compile_rpath $absdir"
! 4977: esac
! 4978: ;;
! 4979: esac
! 4980: case " $sys_lib_dlsearch_path " in
! 4981: *" $libdir "*) ;;
! 4982: *)
! 4983: case "$finalize_rpath " in
! 4984: *" $libdir "*) ;;
! 4985: *) finalize_rpath="$finalize_rpath $libdir"
! 4986: esac
! 4987: ;;
! 4988: esac
! 4989: fi # $linkmode,$pass = prog,link...
! 4990:
! 4991: if test "$alldeplibs" = yes &&
! 4992: { test "$deplibs_check_method" = pass_all ||
! 4993: { test "$build_libtool_libs" = yes &&
! 4994: test -n "$library_names"; }; }; then
! 4995: # We only need to search for static libraries
! 4996: continue
! 4997: fi
! 4998: fi
! 4999:
! 5000: link_static=no # Whether the deplib will be linked statically
! 5001: use_static_libs=$prefer_static_libs
! 5002: if test "$use_static_libs" = built && test "$installed" = yes; then
! 5003: use_static_libs=no
! 5004: fi
! 5005: if test -n "$library_names" &&
! 5006: { test "$use_static_libs" = no || test -z "$old_library"; }; then
! 5007: case $host in
! 5008: *cygwin* | *mingw*)
! 5009: # No point in relinking DLLs because paths are not encoded
! 5010: notinst_deplibs="$notinst_deplibs $lib"
! 5011: need_relink=no
! 5012: ;;
! 5013: *)
! 5014: if test "$installed" = no; then
! 5015: notinst_deplibs="$notinst_deplibs $lib"
! 5016: need_relink=yes
! 5017: fi
! 5018: ;;
! 5019: esac
! 5020: # This is a shared library
! 5021:
! 5022: # Warn about portability, can't link against -module's on some
! 5023: # systems (darwin). Don't bleat about dlopened modules though!
! 5024: dlopenmodule=""
! 5025: for dlpremoduletest in $dlprefiles; do
! 5026: if test "X$dlpremoduletest" = "X$lib"; then
! 5027: dlopenmodule="$dlpremoduletest"
! 5028: break
! 5029: fi
! 5030: done
! 5031: if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
! 5032: $ECHO
! 5033: if test "$linkmode" = prog; then
! 5034: $ECHO "*** Warning: Linking the executable $output against the loadable module"
! 5035: else
! 5036: $ECHO "*** Warning: Linking the shared library $output against the loadable module"
! 5037: fi
! 5038: $ECHO "*** $linklib is not portable!"
! 5039: fi
! 5040: if test "$linkmode" = lib &&
! 5041: test "$hardcode_into_libs" = yes; then
! 5042: # Hardcode the library path.
! 5043: # Skip directories that are in the system default run-time
! 5044: # search path.
! 5045: case " $sys_lib_dlsearch_path " in
! 5046: *" $absdir "*) ;;
! 5047: *)
! 5048: case "$compile_rpath " in
! 5049: *" $absdir "*) ;;
! 5050: *) compile_rpath="$compile_rpath $absdir"
! 5051: esac
! 5052: ;;
! 5053: esac
! 5054: case " $sys_lib_dlsearch_path " in
! 5055: *" $libdir "*) ;;
! 5056: *)
! 5057: case "$finalize_rpath " in
! 5058: *" $libdir "*) ;;
! 5059: *) finalize_rpath="$finalize_rpath $libdir"
! 5060: esac
! 5061: ;;
! 5062: esac
! 5063: fi
! 5064:
! 5065: if test -n "$old_archive_from_expsyms_cmds"; then
! 5066: # figure out the soname
! 5067: set dummy $library_names
! 5068: shift
! 5069: realname="$1"
! 5070: shift
! 5071: libname=`eval "\\$ECHO \"$libname_spec\""`
! 5072: # use dlname if we got it. it's perfectly good, no?
! 5073: if test -n "$dlname"; then
! 5074: soname="$dlname"
! 5075: elif test -n "$soname_spec"; then
! 5076: # bleh windows
! 5077: case $host in
! 5078: *cygwin* | mingw*)
! 5079: major=`expr $current - $age`
! 5080: versuffix="-$major"
! 5081: ;;
! 5082: esac
! 5083: eval soname=\"$soname_spec\"
! 5084: else
! 5085: soname="$realname"
! 5086: fi
! 5087:
! 5088: # Make a new name for the extract_expsyms_cmds to use
! 5089: soroot="$soname"
! 5090: func_basename "$soroot"
! 5091: soname="$func_basename_result"
! 5092: func_stripname 'lib' '.dll' "$soname"
! 5093: newlib=libimp-$func_stripname_result.a
! 5094:
! 5095: # If the library has no export list, then create one now
! 5096: if test -f "$output_objdir/$soname-def"; then :
! 5097: else
! 5098: func_verbose "extracting exported symbol list from \`$soname'"
! 5099: func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
! 5100: fi
! 5101:
! 5102: # Create $newlib
! 5103: if test -f "$output_objdir/$newlib"; then :; else
! 5104: func_verbose "generating import library for \`$soname'"
! 5105: func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
! 5106: fi
! 5107: # make sure the library variables are pointing to the new library
! 5108: dir=$output_objdir
! 5109: linklib=$newlib
! 5110: fi # test -n "$old_archive_from_expsyms_cmds"
! 5111:
! 5112: if test "$linkmode" = prog || test "$mode" != relink; then
! 5113: add_shlibpath=
! 5114: add_dir=
! 5115: add=
! 5116: lib_linked=yes
! 5117: case $hardcode_action in
! 5118: immediate | unsupported)
! 5119: if test "$hardcode_direct" = no; then
! 5120: add="$dir/$linklib"
! 5121: case $host in
! 5122: *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
! 5123: *-*-sysv4*uw2*) add_dir="-L$dir" ;;
! 5124: *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
! 5125: *-*-unixware7*) add_dir="-L$dir" ;;
! 5126: *-*-darwin* )
! 5127: # if the lib is a (non-dlopened) module then we can not
! 5128: # link against it, someone is ignoring the earlier warnings
! 5129: if /usr/bin/file -L $add 2> /dev/null |
! 5130: $GREP ": [^:]* bundle" >/dev/null ; then
! 5131: if test "X$dlopenmodule" != "X$lib"; then
! 5132: $ECHO "*** Warning: lib $linklib is a module, not a shared library"
! 5133: if test -z "$old_library" ; then
! 5134: $ECHO
! 5135: $ECHO "*** And there doesn't seem to be a static archive available"
! 5136: $ECHO "*** The link will probably fail, sorry"
! 5137: else
! 5138: add="$dir/$old_library"
! 5139: fi
! 5140: elif test -n "$old_library"; then
! 5141: add="$dir/$old_library"
! 5142: fi
! 5143: fi
! 5144: esac
! 5145: elif test "$hardcode_minus_L" = no; then
! 5146: case $host in
! 5147: *-*-sunos*) add_shlibpath="$dir" ;;
! 5148: esac
! 5149: add_dir="-L$dir"
! 5150: add="-l$name"
! 5151: elif test "$hardcode_shlibpath_var" = no; then
! 5152: add_shlibpath="$dir"
! 5153: add="-l$name"
! 5154: else
! 5155: lib_linked=no
! 5156: fi
! 5157: ;;
! 5158: relink)
! 5159: if test "$hardcode_direct" = yes &&
! 5160: test "$hardcode_direct_absolute" = no; then
! 5161: add="$dir/$linklib"
! 5162: elif test "$hardcode_minus_L" = yes; then
! 5163: add_dir="-L$dir"
! 5164: # Try looking first in the location we're being installed to.
! 5165: if test -n "$inst_prefix_dir"; then
! 5166: case $libdir in
! 5167: [\\/]*)
! 5168: add_dir="$add_dir -L$inst_prefix_dir$libdir"
! 5169: ;;
! 5170: esac
! 5171: fi
! 5172: add="-l$name"
! 5173: elif test "$hardcode_shlibpath_var" = yes; then
! 5174: add_shlibpath="$dir"
! 5175: add="-l$name"
! 5176: else
! 5177: lib_linked=no
! 5178: fi
! 5179: ;;
! 5180: *) lib_linked=no ;;
! 5181: esac
! 5182:
! 5183: if test "$lib_linked" != yes; then
! 5184: func_fatal_configuration "unsupported hardcode properties"
! 5185: fi
! 5186:
! 5187: if test -n "$add_shlibpath"; then
! 5188: case :$compile_shlibpath: in
! 5189: *":$add_shlibpath:"*) ;;
! 5190: *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
! 5191: esac
! 5192: fi
! 5193: if test "$linkmode" = prog; then
! 5194: test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
! 5195: test -n "$add" && compile_deplibs="$add $compile_deplibs"
! 5196: else
! 5197: test -n "$add_dir" && deplibs="$add_dir $deplibs"
! 5198: test -n "$add" && deplibs="$add $deplibs"
! 5199: if test "$hardcode_direct" != yes &&
! 5200: test "$hardcode_minus_L" != yes &&
! 5201: test "$hardcode_shlibpath_var" = yes; then
! 5202: case :$finalize_shlibpath: in
! 5203: *":$libdir:"*) ;;
! 5204: *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
! 5205: esac
! 5206: fi
! 5207: fi
! 5208: fi
! 5209:
! 5210: if test "$linkmode" = prog || test "$mode" = relink; then
! 5211: add_shlibpath=
! 5212: add_dir=
! 5213: add=
! 5214: # Finalize command for both is simple: just hardcode it.
! 5215: if test "$hardcode_direct" = yes &&
! 5216: test "$hardcode_direct_absolute" = no; then
! 5217: add="$libdir/$linklib"
! 5218: elif test "$hardcode_minus_L" = yes; then
! 5219: add_dir="-L$libdir"
! 5220: add="-l$name"
! 5221: elif test "$hardcode_shlibpath_var" = yes; then
! 5222: case :$finalize_shlibpath: in
! 5223: *":$libdir:"*) ;;
! 5224: *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
! 5225: esac
! 5226: add="-l$name"
! 5227: elif test "$hardcode_automatic" = yes; then
! 5228: if test -n "$inst_prefix_dir" &&
! 5229: test -f "$inst_prefix_dir$libdir/$linklib" ; then
! 5230: add="$inst_prefix_dir$libdir/$linklib"
! 5231: else
! 5232: add="$libdir/$linklib"
! 5233: fi
! 5234: else
! 5235: # We cannot seem to hardcode it, guess we'll fake it.
! 5236: add_dir="-L$libdir"
! 5237: # Try looking first in the location we're being installed to.
! 5238: if test -n "$inst_prefix_dir"; then
! 5239: case $libdir in
! 5240: [\\/]*)
! 5241: add_dir="$add_dir -L$inst_prefix_dir$libdir"
! 5242: ;;
! 5243: esac
! 5244: fi
! 5245: add="-l$name"
! 5246: fi
! 5247:
! 5248: if test "$linkmode" = prog; then
! 5249: test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
! 5250: test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
! 5251: else
! 5252: test -n "$add_dir" && deplibs="$add_dir $deplibs"
! 5253: test -n "$add" && deplibs="$add $deplibs"
! 5254: fi
! 5255: fi
! 5256: elif test "$linkmode" = prog; then
! 5257: # Here we assume that one of hardcode_direct or hardcode_minus_L
! 5258: # is not unsupported. This is valid on all known static and
! 5259: # shared platforms.
! 5260: if test "$hardcode_direct" != unsupported; then
! 5261: test -n "$old_library" && linklib="$old_library"
! 5262: compile_deplibs="$dir/$linklib $compile_deplibs"
! 5263: finalize_deplibs="$dir/$linklib $finalize_deplibs"
! 5264: else
! 5265: compile_deplibs="-l$name -L$dir $compile_deplibs"
! 5266: finalize_deplibs="-l$name -L$dir $finalize_deplibs"
! 5267: fi
! 5268: elif test "$build_libtool_libs" = yes; then
! 5269: # Not a shared library
! 5270: if test "$deplibs_check_method" != pass_all; then
! 5271: # We're trying link a shared library against a static one
! 5272: # but the system doesn't support it.
! 5273:
! 5274: # Just print a warning and add the library to dependency_libs so
! 5275: # that the program can be linked against the static library.
! 5276: $ECHO
! 5277: $ECHO "*** Warning: This system can not link to static lib archive $lib."
! 5278: $ECHO "*** I have the capability to make that library automatically link in when"
! 5279: $ECHO "*** you link to this library. But I can only do this if you have a"
! 5280: $ECHO "*** shared version of the library, which you do not appear to have."
! 5281: if test "$module" = yes; then
! 5282: $ECHO "*** But as you try to build a module library, libtool will still create "
! 5283: $ECHO "*** a static module, that should work as long as the dlopening application"
! 5284: $ECHO "*** is linked with the -dlopen flag to resolve symbols at runtime."
! 5285: if test -z "$global_symbol_pipe"; then
! 5286: $ECHO
! 5287: $ECHO "*** However, this would only work if libtool was able to extract symbol"
! 5288: $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
! 5289: $ECHO "*** not find such a program. So, this module is probably useless."
! 5290: $ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
! 5291: fi
! 5292: if test "$build_old_libs" = no; then
! 5293: build_libtool_libs=module
! 5294: build_old_libs=yes
! 5295: else
! 5296: build_libtool_libs=no
! 5297: fi
! 5298: fi
! 5299: else
! 5300: deplibs="$dir/$old_library $deplibs"
! 5301: link_static=yes
! 5302: fi
! 5303: fi # link shared/static library?
! 5304:
! 5305: if test "$linkmode" = lib; then
! 5306: if test -n "$dependency_libs" &&
! 5307: { test "$hardcode_into_libs" != yes ||
! 5308: test "$build_old_libs" = yes ||
! 5309: test "$link_static" = yes; }; then
! 5310: # Extract -R from dependency_libs
! 5311: temp_deplibs=
! 5312: for libdir in $dependency_libs; do
! 5313: case $libdir in
! 5314: -R*) func_stripname '-R' '' "$libdir"
! 5315: temp_xrpath=$func_stripname_result
! 5316: case " $xrpath " in
! 5317: *" $temp_xrpath "*) ;;
! 5318: *) xrpath="$xrpath $temp_xrpath";;
! 5319: esac;;
! 5320: *) temp_deplibs="$temp_deplibs $libdir";;
! 5321: esac
! 5322: done
! 5323: dependency_libs="$temp_deplibs"
! 5324: fi
! 5325:
! 5326: newlib_search_path="$newlib_search_path $absdir"
! 5327: # Link against this library
! 5328: test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
! 5329: # ... and its dependency_libs
! 5330: tmp_libs=
! 5331: for deplib in $dependency_libs; do
! 5332: newdependency_libs="$deplib $newdependency_libs"
! 5333: if $opt_duplicate_deps ; then
! 5334: case "$tmp_libs " in
! 5335: *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
! 5336: esac
! 5337: fi
! 5338: tmp_libs="$tmp_libs $deplib"
! 5339: done
! 5340:
! 5341: if test "$link_all_deplibs" != no; then
! 5342: # Add the search paths of all dependency libraries
! 5343: for deplib in $dependency_libs; do
! 5344: case $deplib in
! 5345: -L*) path="$deplib" ;;
! 5346: *.la)
! 5347: func_dirname "$deplib" "" "."
! 5348: dir="$func_dirname_result"
! 5349: # We need an absolute path.
! 5350: case $dir in
! 5351: [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
! 5352: *)
! 5353: absdir=`cd "$dir" && pwd`
! 5354: if test -z "$absdir"; then
! 5355: func_warning "cannot determine absolute directory name of \`$dir'"
! 5356: absdir="$dir"
! 5357: fi
! 5358: ;;
! 5359: esac
! 5360: if $GREP "^installed=no" $deplib > /dev/null; then
! 5361: case $host in
! 5362: *-*-darwin*)
! 5363: depdepl=
! 5364: eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
! 5365: if test -n "$deplibrary_names" ; then
! 5366: for tmp in $deplibrary_names ; do
! 5367: depdepl=$tmp
! 5368: done
! 5369: if test -f "$absdir/$objdir/$depdepl" ; then
! 5370: depdepl="$absdir/$objdir/$depdepl"
! 5371: darwin_install_name=`otool -L $depdepl | $SED -n -e '3q;2,2p' | $SED -e 's/(.*//'`
! 5372: darwin_install_name=`$ECHO $darwin_install_name`
! 5373: if test -z "$darwin_install_name"; then
! 5374: darwin_install_name=`otool64 -L $depdepl | $SED -n -e '3q;2,2p' | $SED -e 's/(.*//'`
! 5375: darwin_install_name=`$ECHO $darwin_install_name`
! 5376: fi
! 5377: compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
! 5378: linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}"
! 5379: path=
! 5380: fi
! 5381: fi
! 5382: ;;
! 5383: *)
! 5384: path="-L$absdir/$objdir"
! 5385: ;;
! 5386: esac
! 5387: else
! 5388: eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
! 5389: test -z "$libdir" && \
! 5390: func_fatal_error "\`$deplib' is not a valid libtool archive"
! 5391: test "$absdir" != "$libdir" && \
! 5392: func_warning "\`$deplib' seems to be moved"
! 5393:
! 5394: path="-L$absdir"
! 5395: fi
! 5396: ;;
! 5397: esac
! 5398: case " $deplibs " in
! 5399: *" $path "*) ;;
! 5400: *) deplibs="$path $deplibs" ;;
! 5401: esac
! 5402: done
! 5403: fi # link_all_deplibs != no
! 5404: fi # linkmode = lib
! 5405: done # for deplib in $libs
! 5406: if test "$pass" = link; then
! 5407: if test "$linkmode" = "prog"; then
! 5408: compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
! 5409: finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
! 5410: else
! 5411: compiler_flags="$compiler_flags "`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
! 5412: fi
! 5413: fi
! 5414: dependency_libs="$newdependency_libs"
! 5415: if test "$pass" = dlpreopen; then
! 5416: # Link the dlpreopened libraries before other libraries
! 5417: for deplib in $save_deplibs; do
! 5418: deplibs="$deplib $deplibs"
! 5419: done
! 5420: fi
! 5421: if test "$pass" != dlopen; then
! 5422: if test "$pass" != conv; then
! 5423: # Make sure lib_search_path contains only unique directories.
! 5424: lib_search_path=
! 5425: for dir in $newlib_search_path; do
! 5426: case "$lib_search_path " in
! 5427: *" $dir "*) ;;
! 5428: *) lib_search_path="$lib_search_path $dir" ;;
! 5429: esac
! 5430: done
! 5431: newlib_search_path=
! 5432: fi
! 5433:
! 5434: if test "$linkmode,$pass" != "prog,link"; then
! 5435: vars="deplibs"
! 5436: else
! 5437: vars="compile_deplibs finalize_deplibs"
! 5438: fi
! 5439: for var in $vars dependency_libs; do
! 5440: # Add libraries to $var in reverse order
! 5441: eval tmp_libs=\"\$$var\"
! 5442: new_libs=
! 5443: for deplib in $tmp_libs; do
! 5444: # FIXME: Pedantically, this is the right thing to do, so
! 5445: # that some nasty dependency loop isn't accidentally
! 5446: # broken:
! 5447: #new_libs="$deplib $new_libs"
! 5448: # Pragmatically, this seems to cause very few problems in
! 5449: # practice:
! 5450: case $deplib in
! 5451: -L*) new_libs="$deplib $new_libs" ;;
! 5452: -R*) ;;
! 5453: *)
! 5454: # And here is the reason: when a library appears more
! 5455: # than once as an explicit dependence of a library, or
! 5456: # is implicitly linked in more than once by the
! 5457: # compiler, it is considered special, and multiple
! 5458: # occurrences thereof are not removed. Compare this
! 5459: # with having the same library being listed as a
! 5460: # dependency of multiple other libraries: in this case,
! 5461: # we know (pedantically, we assume) the library does not
! 5462: # need to be listed more than once, so we keep only the
! 5463: # last copy. This is not always right, but it is rare
! 5464: # enough that we require users that really mean to play
! 5465: # such unportable linking tricks to link the library
! 5466: # using -Wl,-lname, so that libtool does not consider it
! 5467: # for duplicate removal.
! 5468: case " $specialdeplibs " in
! 5469: *" $deplib "*) new_libs="$deplib $new_libs" ;;
! 5470: *)
! 5471: case " $new_libs " in
! 5472: *" $deplib "*) ;;
! 5473: *) new_libs="$deplib $new_libs" ;;
! 5474: esac
! 5475: ;;
! 5476: esac
! 5477: ;;
! 5478: esac
! 5479: done
! 5480: tmp_libs=
! 5481: for deplib in $new_libs; do
! 5482: case $deplib in
! 5483: -L*)
! 5484: case " $tmp_libs " in
! 5485: *" $deplib "*) ;;
! 5486: *) tmp_libs="$tmp_libs $deplib" ;;
! 5487: esac
! 5488: ;;
! 5489: *) tmp_libs="$tmp_libs $deplib" ;;
! 5490: esac
! 5491: done
! 5492: eval $var=\"$tmp_libs\"
! 5493: done # for var
! 5494: fi
! 5495: # Last step: remove runtime libs from dependency_libs
! 5496: # (they stay in deplibs)
! 5497: tmp_libs=
! 5498: for i in $dependency_libs ; do
! 5499: case " $predeps $postdeps $compiler_lib_search_path " in
! 5500: *" $i "*)
! 5501: i=""
! 5502: ;;
! 5503: esac
! 5504: if test -n "$i" ; then
! 5505: tmp_libs="$tmp_libs $i"
! 5506: fi
! 5507: done
! 5508: dependency_libs=$tmp_libs
! 5509: done # for pass
! 5510: if test "$linkmode" = prog; then
! 5511: dlfiles="$newdlfiles"
! 5512: fi
! 5513: if test "$linkmode" = prog || test "$linkmode" = lib; then
! 5514: dlprefiles="$newdlprefiles"
! 5515: fi
! 5516:
! 5517: case $linkmode in
! 5518: oldlib)
! 5519: if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
! 5520: func_warning "\`-dlopen' is ignored for archives"
! 5521: fi
! 5522:
! 5523: case " $deplibs" in
! 5524: *\ -l* | *\ -L*)
! 5525: func_warning "\`-l' and \`-L' are ignored for archives" ;;
! 5526: esac
! 5527:
! 5528: test -n "$rpath" && \
! 5529: func_warning "\`-rpath' is ignored for archives"
! 5530:
! 5531: test -n "$xrpath" && \
! 5532: func_warning "\`-R' is ignored for archives"
! 5533:
! 5534: test -n "$vinfo" && \
! 5535: func_warning "\`-version-info/-version-number' is ignored for archives"
! 5536:
! 5537: test -n "$release" && \
! 5538: func_warning "\`-release' is ignored for archives"
! 5539:
! 5540: test -n "$export_symbols$export_symbols_regex" && \
! 5541: func_warning "\`-export-symbols' is ignored for archives"
! 5542:
! 5543: # Now set the variables for building old libraries.
! 5544: build_libtool_libs=no
! 5545: oldlibs="$output"
! 5546: objs="$objs$old_deplibs"
! 5547: ;;
! 5548:
! 5549: lib)
! 5550: # Make sure we only generate libraries of the form `libNAME.la'.
! 5551: case $outputname in
! 5552: lib*)
! 5553: func_stripname 'lib' '.la' "$outputname"
! 5554: name=$func_stripname_result
! 5555: eval shared_ext=\"$shrext_cmds\"
! 5556: eval libname=\"$libname_spec\"
! 5557: ;;
! 5558: *)
! 5559: test "$module" = no && \
! 5560: func_fatal_help "libtool library \`$output' must begin with \`lib'"
! 5561:
! 5562: if test "$need_lib_prefix" != no; then
! 5563: # Add the "lib" prefix for modules if required
! 5564: func_stripname '' '.la' "$outputname"
! 5565: name=$func_stripname_result
! 5566: eval shared_ext=\"$shrext_cmds\"
! 5567: eval libname=\"$libname_spec\"
! 5568: else
! 5569: func_stripname '' '.la' "$outputname"
! 5570: libname=$func_stripname_result
! 5571: fi
! 5572: ;;
! 5573: esac
! 5574:
! 5575: if test -n "$objs"; then
! 5576: if test "$deplibs_check_method" != pass_all; then
! 5577: func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
! 5578: else
! 5579: $ECHO
! 5580: $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
! 5581: $ECHO "*** objects $objs is not portable!"
! 5582: libobjs="$libobjs $objs"
! 5583: fi
! 5584: fi
! 5585:
! 5586: test "$dlself" != no && \
! 5587: func_warning "\`-dlopen self' is ignored for libtool libraries"
! 5588:
! 5589: set dummy $rpath
! 5590: shift
! 5591: test "$#" -gt 1 && \
! 5592: func_warning "ignoring multiple \`-rpath's for a libtool library"
! 5593:
! 5594: install_libdir="$1"
! 5595:
! 5596: oldlibs=
! 5597: if test -z "$rpath"; then
! 5598: if test "$build_libtool_libs" = yes; then
! 5599: # Building a libtool convenience library.
! 5600: # Some compilers have problems with a `.al' extension so
! 5601: # convenience libraries should have the same extension an
! 5602: # archive normally would.
! 5603: oldlibs="$output_objdir/$libname.$libext $oldlibs"
! 5604: build_libtool_libs=convenience
! 5605: build_old_libs=yes
! 5606: fi
! 5607:
! 5608: test -n "$vinfo" && \
! 5609: func_warning "\`-version-info/-version-number' is ignored for convenience libraries"
! 5610:
! 5611: test -n "$release" && \
! 5612: func_warning "\`-release' is ignored for convenience libraries"
! 5613: else
! 5614:
! 5615: # Parse the version information argument.
! 5616: save_ifs="$IFS"; IFS=':'
! 5617: set dummy $vinfo 0 0 0
! 5618: shift
! 5619: IFS="$save_ifs"
! 5620:
! 5621: test -n "$7" && \
! 5622: func_fatal_help "too many parameters to \`-version-info'"
! 5623:
! 5624: # convert absolute version numbers to libtool ages
! 5625: # this retains compatibility with .la files and attempts
! 5626: # to make the code below a bit more comprehensible
! 5627:
! 5628: case $vinfo_number in
! 5629: yes)
! 5630: number_major="$1"
! 5631: number_minor="$2"
! 5632: number_revision="$3"
! 5633: #
! 5634: # There are really only two kinds -- those that
! 5635: # use the current revision as the major version
! 5636: # and those that subtract age and use age as
! 5637: # a minor version. But, then there is irix
! 5638: # which has an extra 1 added just for fun
! 5639: #
! 5640: case $version_type in
! 5641: darwin|linux|osf|windows|none)
! 5642: current=`expr $number_major + $number_minor`
! 5643: age="$number_minor"
! 5644: revision="$number_revision"
! 5645: ;;
! 5646: freebsd-aout|freebsd-elf|sunos)
! 5647: current="$number_major"
! 5648: revision="$number_minor"
! 5649: age="0"
! 5650: ;;
! 5651: irix|nonstopux)
! 5652: current=`expr $number_major + $number_minor`
! 5653: age="$number_minor"
! 5654: revision="$number_minor"
! 5655: lt_irix_increment=no
! 5656: ;;
! 5657: esac
! 5658: ;;
! 5659: no)
! 5660: current="$1"
! 5661: revision="$2"
! 5662: age="$3"
! 5663: ;;
! 5664: esac
! 5665:
! 5666: # Check that each of the things are valid numbers.
! 5667: case $current in
! 5668: 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
! 5669: *)
! 5670: func_error "CURRENT \`$current' must be a nonnegative integer"
! 5671: func_fatal_error "\`$vinfo' is not valid version information"
! 5672: ;;
! 5673: esac
! 5674:
! 5675: case $revision in
! 5676: 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
! 5677: *)
! 5678: func_error "REVISION \`$revision' must be a nonnegative integer"
! 5679: func_fatal_error "\`$vinfo' is not valid version information"
! 5680: ;;
! 5681: esac
! 5682:
! 5683: case $age in
! 5684: 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
! 5685: *)
! 5686: func_error "AGE \`$age' must be a nonnegative integer"
! 5687: func_fatal_error "\`$vinfo' is not valid version information"
! 5688: ;;
! 5689: esac
! 5690:
! 5691: if test "$age" -gt "$current"; then
! 5692: func_error "AGE \`$age' is greater than the current interface number \`$current'"
! 5693: func_fatal_error "\`$vinfo' is not valid version information"
! 5694: fi
! 5695:
! 5696: # Calculate the version variables.
! 5697: major=
! 5698: versuffix=
! 5699: verstring=
! 5700: case $version_type in
! 5701: none) ;;
! 5702:
! 5703: darwin)
! 5704: # Like Linux, but with the current version available in
! 5705: # verstring for coding it into the library header
! 5706: major=.`expr $current - $age`
! 5707: versuffix="$major.$age.$revision"
! 5708: # Darwin ld doesn't like 0 for these options...
! 5709: minor_current=`expr $current + 1`
! 5710: xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
! 5711: verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
! 5712: ;;
! 5713:
! 5714: freebsd-aout)
! 5715: major=".$current"
! 5716: versuffix=".$current.$revision";
! 5717: ;;
! 5718:
! 5719: freebsd-elf)
! 5720: major=".$current"
! 5721: versuffix=".$current"
! 5722: ;;
! 5723:
! 5724: irix | nonstopux)
! 5725: if test "X$lt_irix_increment" = "Xno"; then
! 5726: major=`expr $current - $age`
! 5727: else
! 5728: major=`expr $current - $age + 1`
! 5729: fi
! 5730:
! 5731: case $version_type in
! 5732: nonstopux) verstring_prefix=nonstopux ;;
! 5733: *) verstring_prefix=sgi ;;
! 5734: esac
! 5735: verstring="$verstring_prefix$major.$revision"
! 5736:
! 5737: # Add in all the interfaces that we are compatible with.
! 5738: loop=$revision
! 5739: while test "$loop" -ne 0; do
! 5740: iface=`expr $revision - $loop`
! 5741: loop=`expr $loop - 1`
! 5742: verstring="$verstring_prefix$major.$iface:$verstring"
! 5743: done
! 5744:
! 5745: # Before this point, $major must not contain `.'.
! 5746: major=.$major
! 5747: versuffix="$major.$revision"
! 5748: ;;
! 5749:
! 5750: linux)
! 5751: major=.`expr $current - $age`
! 5752: versuffix="$major.$age.$revision"
! 5753: ;;
! 5754:
! 5755: osf)
! 5756: major=.`expr $current - $age`
! 5757: versuffix=".$current.$age.$revision"
! 5758: verstring="$current.$age.$revision"
! 5759:
! 5760: # Add in all the interfaces that we are compatible with.
! 5761: loop=$age
! 5762: while test "$loop" -ne 0; do
! 5763: iface=`expr $current - $loop`
! 5764: loop=`expr $loop - 1`
! 5765: verstring="$verstring:${iface}.0"
! 5766: done
! 5767:
! 5768: # Make executables depend on our current version.
! 5769: verstring="$verstring:${current}.0"
! 5770: ;;
! 5771:
! 5772: qnx)
! 5773: major=".$current"
! 5774: versuffix=".$current"
! 5775: ;;
! 5776:
! 5777: sunos)
! 5778: major=".$current"
! 5779: versuffix=".$current.$revision"
! 5780: ;;
! 5781:
! 5782: windows)
! 5783: # Use '-' rather than '.', since we only want one
! 5784: # extension on DOS 8.3 filesystems.
! 5785: major=`expr $current - $age`
! 5786: versuffix="-$major"
! 5787: ;;
! 5788:
! 5789: *)
! 5790: func_fatal_configuration "unknown library version type \`$version_type'"
! 5791: ;;
! 5792: esac
! 5793:
! 5794: # Clear the version info if we defaulted, and they specified a release.
! 5795: if test -z "$vinfo" && test -n "$release"; then
! 5796: major=
! 5797: case $version_type in
! 5798: darwin)
! 5799: # we can't check for "0.0" in archive_cmds due to quoting
! 5800: # problems, so we reset it completely
! 5801: verstring=
! 5802: ;;
! 5803: *)
! 5804: verstring="0.0"
! 5805: ;;
! 5806: esac
! 5807: if test "$need_version" = no; then
! 5808: versuffix=
! 5809: else
! 5810: versuffix=".0.0"
! 5811: fi
! 5812: fi
! 5813:
! 5814: # Remove version info from name if versioning should be avoided
! 5815: if test "$avoid_version" = yes && test "$need_version" = no; then
! 5816: major=
! 5817: versuffix=
! 5818: verstring=""
! 5819: fi
! 5820:
! 5821: # Check to see if the archive will have undefined symbols.
! 5822: if test "$allow_undefined" = yes; then
! 5823: if test "$allow_undefined_flag" = unsupported; then
! 5824: func_warning "undefined symbols not allowed in $host shared libraries"
! 5825: build_libtool_libs=no
! 5826: build_old_libs=yes
! 5827: fi
! 5828: else
! 5829: # Don't allow undefined symbols.
! 5830: allow_undefined_flag="$no_undefined_flag"
! 5831: fi
! 5832:
! 5833: fi
! 5834:
! 5835: func_generate_dlsyms "$libname" "$libname" "yes"
! 5836: libobjs="$libobjs $symfileobj"
! 5837: test "X$libobjs" = "X " && libobjs=
! 5838:
! 5839: if test "$mode" != relink; then
! 5840: # Remove our outputs, but don't remove object files since they
! 5841: # may have been created when compiling PIC objects.
! 5842: removelist=
! 5843: tempremovelist=`$ECHO "$output_objdir/*"`
! 5844: for p in $tempremovelist; do
! 5845: case $p in
! 5846: *.$objext)
! 5847: ;;
! 5848: $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
! 5849: if test "X$precious_files_regex" != "X"; then
! 5850: if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
! 5851: then
! 5852: continue
! 5853: fi
! 5854: fi
! 5855: removelist="$removelist $p"
! 5856: ;;
! 5857: *) ;;
! 5858: esac
! 5859: done
! 5860: test -n "$removelist" && \
! 5861: func_show_eval "${RM}r \$removelist"
! 5862: fi
! 5863:
! 5864: # Now set the variables for building old libraries.
! 5865: if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
! 5866: oldlibs="$oldlibs $output_objdir/$libname.$libext"
! 5867:
! 5868: # Transform .lo files to .o files.
! 5869: oldobjs="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
! 5870: fi
! 5871:
! 5872: # Eliminate all temporary directories.
! 5873: #for path in $notinst_path; do
! 5874: # lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e "s% $path % %g"`
! 5875: # deplibs=`$ECHO "X$deplibs " | $Xsed -e "s% -L$path % %g"`
! 5876: # dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e "s% -L$path % %g"`
! 5877: #done
! 5878:
! 5879: if test -n "$xrpath"; then
! 5880: # If the user specified any rpath flags, then add them.
! 5881: temp_xrpath=
! 5882: for libdir in $xrpath; do
! 5883: temp_xrpath="$temp_xrpath -R$libdir"
! 5884: case "$finalize_rpath " in
! 5885: *" $libdir "*) ;;
! 5886: *) finalize_rpath="$finalize_rpath $libdir" ;;
! 5887: esac
! 5888: done
! 5889: if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
! 5890: dependency_libs="$temp_xrpath $dependency_libs"
! 5891: fi
! 5892: fi
! 5893:
! 5894: # Make sure dlfiles contains only unique files that won't be dlpreopened
! 5895: old_dlfiles="$dlfiles"
! 5896: dlfiles=
! 5897: for lib in $old_dlfiles; do
! 5898: case " $dlprefiles $dlfiles " in
! 5899: *" $lib "*) ;;
! 5900: *) dlfiles="$dlfiles $lib" ;;
! 5901: esac
! 5902: done
! 5903:
! 5904: # Make sure dlprefiles contains only unique files
! 5905: old_dlprefiles="$dlprefiles"
! 5906: dlprefiles=
! 5907: for lib in $old_dlprefiles; do
! 5908: case "$dlprefiles " in
! 5909: *" $lib "*) ;;
! 5910: *) dlprefiles="$dlprefiles $lib" ;;
! 5911: esac
! 5912: done
! 5913:
! 5914: if test "$build_libtool_libs" = yes; then
! 5915: if test -n "$rpath"; then
! 5916: case $host in
! 5917: *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*)
! 5918: # these systems don't actually have a c library (as such)!
! 5919: ;;
! 5920: *-*-rhapsody* | *-*-darwin1.[012])
! 5921: # Rhapsody C library is in the System framework
! 5922: deplibs="$deplibs System.ltframework"
! 5923: ;;
! 5924: *-*-netbsd*)
! 5925: # Don't link with libc until the a.out ld.so is fixed.
! 5926: ;;
! 5927: *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
! 5928: # Do not include libc due to us having libc/libc_r.
! 5929: ;;
! 5930: *-*-sco3.2v5* | *-*-sco5v6*)
! 5931: # Causes problems with __ctype
! 5932: ;;
! 5933: *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
! 5934: # Compiler inserts libc in the correct place for threads to work
! 5935: ;;
! 5936: *)
! 5937: # Add libc to deplibs on all other systems if necessary.
! 5938: if test "$build_libtool_need_lc" = "yes"; then
! 5939: deplibs="$deplibs -lc"
! 5940: fi
! 5941: ;;
! 5942: esac
! 5943: fi
! 5944:
! 5945: # Transform deplibs into only deplibs that can be linked in shared.
! 5946: name_save=$name
! 5947: libname_save=$libname
! 5948: release_save=$release
! 5949: versuffix_save=$versuffix
! 5950: major_save=$major
! 5951: # I'm not sure if I'm treating the release correctly. I think
! 5952: # release should show up in the -l (ie -lgmp5) so we don't want to
! 5953: # add it in twice. Is that correct?
! 5954: release=""
! 5955: versuffix=""
! 5956: major=""
! 5957: newdeplibs=
! 5958: droppeddeps=no
! 5959: case $deplibs_check_method in
! 5960: pass_all)
! 5961: # Don't check for shared/static. Everything works.
! 5962: # This might be a little naive. We might want to check
! 5963: # whether the library exists or not. But this is on
! 5964: # osf3 & osf4 and I'm not really sure... Just
! 5965: # implementing what was already the behavior.
! 5966: newdeplibs=$deplibs
! 5967: ;;
! 5968: test_compile)
! 5969: # This code stresses the "libraries are programs" paradigm to its
! 5970: # limits. Maybe even breaks it. We compile a program, linking it
! 5971: # against the deplibs as a proxy for the library. Then we can check
! 5972: # whether they linked in statically or dynamically with ldd.
! 5973: $opt_dry_run || $RM conftest.c
! 5974: cat > conftest.c <<EOF
! 5975: int main() { return 0; }
! 5976: EOF
! 5977: $opt_dry_run || $RM conftest
! 5978: if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
! 5979: ldd_output=`ldd conftest`
! 5980: for i in $deplibs; do
! 5981: name=`expr $i : '-l\(.*\)'`
! 5982: # If $name is empty we are operating on a -L argument.
! 5983: if test "$name" != "" && test "$name" != "0"; then
! 5984: if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
! 5985: case " $predeps $postdeps " in
! 5986: *" $i "*)
! 5987: newdeplibs="$newdeplibs $i"
! 5988: i=""
! 5989: ;;
! 5990: esac
! 5991: fi
! 5992: if test -n "$i" ; then
! 5993: libname=`eval "\\$ECHO \"$libname_spec\""`
! 5994: deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
! 5995: set dummy $deplib_matches; shift
! 5996: deplib_match=$1
! 5997: if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
! 5998: newdeplibs="$newdeplibs $i"
! 5999: else
! 6000: droppeddeps=yes
! 6001: $ECHO
! 6002: $ECHO "*** Warning: dynamic linker does not accept needed library $i."
! 6003: $ECHO "*** I have the capability to make that library automatically link in when"
! 6004: $ECHO "*** you link to this library. But I can only do this if you have a"
! 6005: $ECHO "*** shared version of the library, which I believe you do not have"
! 6006: $ECHO "*** because a test_compile did reveal that the linker did not use it for"
! 6007: $ECHO "*** its dynamic dependency list that programs get resolved with at runtime."
! 6008: fi
! 6009: fi
! 6010: else
! 6011: newdeplibs="$newdeplibs $i"
! 6012: fi
! 6013: done
! 6014: else
! 6015: # Error occurred in the first compile. Let's try to salvage
! 6016: # the situation: Compile a separate program for each library.
! 6017: for i in $deplibs; do
! 6018: name=`expr $i : '-l\(.*\)'`
! 6019: # If $name is empty we are operating on a -L argument.
! 6020: if test "$name" != "" && test "$name" != "0"; then
! 6021: $opt_dry_run || $RM conftest
! 6022: if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
! 6023: ldd_output=`ldd conftest`
! 6024: if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
! 6025: case " $predeps $postdeps " in
! 6026: *" $i "*)
! 6027: newdeplibs="$newdeplibs $i"
! 6028: i=""
! 6029: ;;
! 6030: esac
! 6031: fi
! 6032: if test -n "$i" ; then
! 6033: libname=`eval "\\$ECHO \"$libname_spec\""`
! 6034: deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
! 6035: set dummy $deplib_matches; shift
! 6036: deplib_match=$1
! 6037: if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
! 6038: newdeplibs="$newdeplibs $i"
! 6039: else
! 6040: droppeddeps=yes
! 6041: $ECHO
! 6042: $ECHO "*** Warning: dynamic linker does not accept needed library $i."
! 6043: $ECHO "*** I have the capability to make that library automatically link in when"
! 6044: $ECHO "*** you link to this library. But I can only do this if you have a"
! 6045: $ECHO "*** shared version of the library, which you do not appear to have"
! 6046: $ECHO "*** because a test_compile did reveal that the linker did not use this one"
! 6047: $ECHO "*** as a dynamic dependency that programs can get resolved with at runtime."
! 6048: fi
! 6049: fi
! 6050: else
! 6051: droppeddeps=yes
! 6052: $ECHO
! 6053: $ECHO "*** Warning! Library $i is needed by this library but I was not able to"
! 6054: $ECHO "*** make it link in! You will probably need to install it or some"
! 6055: $ECHO "*** library that it depends on before this library will be fully"
! 6056: $ECHO "*** functional. Installing it before continuing would be even better."
! 6057: fi
! 6058: else
! 6059: newdeplibs="$newdeplibs $i"
! 6060: fi
! 6061: done
! 6062: fi
! 6063: ;;
! 6064: file_magic*)
! 6065: set dummy $deplibs_check_method; shift
! 6066: file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
! 6067: for a_deplib in $deplibs; do
! 6068: name=`expr $a_deplib : '-l\(.*\)'`
! 6069: # If $name is empty we are operating on a -L argument.
! 6070: if test "$name" != "" && test "$name" != "0"; then
! 6071: if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
! 6072: case " $predeps $postdeps " in
! 6073: *" $a_deplib "*)
! 6074: newdeplibs="$newdeplibs $a_deplib"
! 6075: a_deplib=""
! 6076: ;;
! 6077: esac
! 6078: fi
! 6079: if test -n "$a_deplib" ; then
! 6080: libname=`eval "\\$ECHO \"$libname_spec\""`
! 6081: for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
! 6082: potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
! 6083: for potent_lib in $potential_libs; do
! 6084: # Follow soft links.
! 6085: if ls -lLd "$potent_lib" 2>/dev/null |
! 6086: $GREP " -> " >/dev/null; then
! 6087: continue
! 6088: fi
! 6089: # The statement above tries to avoid entering an
! 6090: # endless loop below, in case of cyclic links.
! 6091: # We might still enter an endless loop, since a link
! 6092: # loop can be closed while we follow links,
! 6093: # but so what?
! 6094: potlib="$potent_lib"
! 6095: while test -h "$potlib" 2>/dev/null; do
! 6096: potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
! 6097: case $potliblink in
! 6098: [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
! 6099: *) potlib=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
! 6100: esac
! 6101: done
! 6102: if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
! 6103: $SED -e 10q |
! 6104: $EGREP "$file_magic_regex" > /dev/null; then
! 6105: newdeplibs="$newdeplibs $a_deplib"
! 6106: a_deplib=""
! 6107: break 2
! 6108: fi
! 6109: done
! 6110: done
! 6111: fi
! 6112: if test -n "$a_deplib" ; then
! 6113: droppeddeps=yes
! 6114: $ECHO
! 6115: $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
! 6116: $ECHO "*** I have the capability to make that library automatically link in when"
! 6117: $ECHO "*** you link to this library. But I can only do this if you have a"
! 6118: $ECHO "*** shared version of the library, which you do not appear to have"
! 6119: $ECHO "*** because I did check the linker path looking for a file starting"
! 6120: if test -z "$potlib" ; then
! 6121: $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
! 6122: else
! 6123: $ECHO "*** with $libname and none of the candidates passed a file format test"
! 6124: $ECHO "*** using a file magic. Last file checked: $potlib"
! 6125: fi
! 6126: fi
! 6127: else
! 6128: # Add a -L argument.
! 6129: newdeplibs="$newdeplibs $a_deplib"
! 6130: fi
! 6131: done # Gone through all deplibs.
! 6132: ;;
! 6133: match_pattern*)
! 6134: set dummy $deplibs_check_method; shift
! 6135: match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
! 6136: for a_deplib in $deplibs; do
! 6137: name=`expr $a_deplib : '-l\(.*\)'`
! 6138: # If $name is empty we are operating on a -L argument.
! 6139: if test -n "$name" && test "$name" != "0"; then
! 6140: if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
! 6141: case " $predeps $postdeps " in
! 6142: *" $a_deplib "*)
! 6143: newdeplibs="$newdeplibs $a_deplib"
! 6144: a_deplib=""
! 6145: ;;
! 6146: esac
! 6147: fi
! 6148: if test -n "$a_deplib" ; then
! 6149: libname=`eval "\\$ECHO \"$libname_spec\""`
! 6150: for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
! 6151: potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
! 6152: for potent_lib in $potential_libs; do
! 6153: potlib="$potent_lib" # see symlink-check above in file_magic test
! 6154: if eval "\$ECHO \"X$potent_lib\"" 2>/dev/null | $Xsed -e 10q | \
! 6155: $EGREP "$match_pattern_regex" > /dev/null; then
! 6156: newdeplibs="$newdeplibs $a_deplib"
! 6157: a_deplib=""
! 6158: break 2
! 6159: fi
! 6160: done
! 6161: done
! 6162: fi
! 6163: if test -n "$a_deplib" ; then
! 6164: droppeddeps=yes
! 6165: $ECHO
! 6166: $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
! 6167: $ECHO "*** I have the capability to make that library automatically link in when"
! 6168: $ECHO "*** you link to this library. But I can only do this if you have a"
! 6169: $ECHO "*** shared version of the library, which you do not appear to have"
! 6170: $ECHO "*** because I did check the linker path looking for a file starting"
! 6171: if test -z "$potlib" ; then
! 6172: $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
! 6173: else
! 6174: $ECHO "*** with $libname and none of the candidates passed a file format test"
! 6175: $ECHO "*** using a regex pattern. Last file checked: $potlib"
! 6176: fi
! 6177: fi
! 6178: else
! 6179: # Add a -L argument.
! 6180: newdeplibs="$newdeplibs $a_deplib"
! 6181: fi
! 6182: done # Gone through all deplibs.
! 6183: ;;
! 6184: none | unknown | *)
! 6185: newdeplibs=""
! 6186: tmp_deplibs=`$ECHO "X $deplibs" | $Xsed \
! 6187: -e 's/ -lc$//' -e 's/ -[LR][^ ]*//g'`
! 6188: if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
! 6189: for i in $predeps $postdeps ; do
! 6190: # can't use Xsed below, because $i might contain '/'
! 6191: tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"`
! 6192: done
! 6193: fi
! 6194: if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' |
! 6195: $GREP . >/dev/null; then
! 6196: $ECHO
! 6197: if test "X$deplibs_check_method" = "Xnone"; then
! 6198: $ECHO "*** Warning: inter-library dependencies are not supported in this platform."
! 6199: else
! 6200: $ECHO "*** Warning: inter-library dependencies are not known to be supported."
! 6201: fi
! 6202: $ECHO "*** All declared inter-library dependencies are being dropped."
! 6203: droppeddeps=yes
! 6204: fi
! 6205: ;;
! 6206: esac
! 6207: versuffix=$versuffix_save
! 6208: major=$major_save
! 6209: release=$release_save
! 6210: libname=$libname_save
! 6211: name=$name_save
! 6212:
! 6213: case $host in
! 6214: *-*-rhapsody* | *-*-darwin1.[012])
! 6215: # On Rhapsody replace the C library with the System framework
! 6216: newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
! 6217: ;;
! 6218: esac
! 6219:
! 6220: if test "$droppeddeps" = yes; then
! 6221: if test "$module" = yes; then
! 6222: $ECHO
! 6223: $ECHO "*** Warning: libtool could not satisfy all declared inter-library"
! 6224: $ECHO "*** dependencies of module $libname. Therefore, libtool will create"
! 6225: $ECHO "*** a static module, that should work as long as the dlopening"
! 6226: $ECHO "*** application is linked with the -dlopen flag."
! 6227: if test -z "$global_symbol_pipe"; then
! 6228: $ECHO
! 6229: $ECHO "*** However, this would only work if libtool was able to extract symbol"
! 6230: $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
! 6231: $ECHO "*** not find such a program. So, this module is probably useless."
! 6232: $ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
! 6233: fi
! 6234: if test "$build_old_libs" = no; then
! 6235: oldlibs="$output_objdir/$libname.$libext"
! 6236: build_libtool_libs=module
! 6237: build_old_libs=yes
! 6238: else
! 6239: build_libtool_libs=no
! 6240: fi
! 6241: else
! 6242: $ECHO "*** The inter-library dependencies that have been dropped here will be"
! 6243: $ECHO "*** automatically added whenever a program is linked with this library"
! 6244: $ECHO "*** or is declared to -dlopen it."
! 6245:
! 6246: if test "$allow_undefined" = no; then
! 6247: $ECHO
! 6248: $ECHO "*** Since this library must not contain undefined symbols,"
! 6249: $ECHO "*** because either the platform does not support them or"
! 6250: $ECHO "*** it was explicitly requested with -no-undefined,"
! 6251: $ECHO "*** libtool will only create a static version of it."
! 6252: if test "$build_old_libs" = no; then
! 6253: oldlibs="$output_objdir/$libname.$libext"
! 6254: build_libtool_libs=module
! 6255: build_old_libs=yes
! 6256: else
! 6257: build_libtool_libs=no
! 6258: fi
! 6259: fi
! 6260: fi
! 6261: fi
! 6262: # Done checking deplibs!
! 6263: deplibs=$newdeplibs
! 6264: fi
! 6265: # Time to change all our "foo.ltframework" stuff back to "-framework foo"
! 6266: case $host in
! 6267: *-*-darwin*)
! 6268: newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
! 6269: new_inherited_linker_flags=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
! 6270: deplibs=`$ECHO "X $deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
! 6271: ;;
! 6272: esac
! 6273:
! 6274: # move library search paths that coincide with paths to not yet
! 6275: # installed libraries to the beginning of the library search list
! 6276: new_libs=
! 6277: for path in $notinst_path; do
! 6278: case " $new_libs " in
! 6279: *" -L$path/$objdir "*) ;;
! 6280: *)
! 6281: case " $deplibs " in
! 6282: *" -L$path/$objdir "*)
! 6283: new_libs="$new_libs -L$path/$objdir" ;;
! 6284: esac
! 6285: ;;
! 6286: esac
! 6287: done
! 6288: for deplib in $deplibs; do
! 6289: case $deplib in
! 6290: -L*)
! 6291: case " $new_libs " in
! 6292: *" $deplib "*) ;;
! 6293: *) new_libs="$new_libs $deplib" ;;
! 6294: esac
! 6295: ;;
! 6296: *) new_libs="$new_libs $deplib" ;;
! 6297: esac
! 6298: done
! 6299: deplibs="$new_libs"
! 6300:
! 6301: # All the library-specific variables (install_libdir is set above).
! 6302: library_names=
! 6303: old_library=
! 6304: dlname=
! 6305:
! 6306: # Test again, we may have decided not to build it any more
! 6307: if test "$build_libtool_libs" = yes; then
! 6308: if test "$hardcode_into_libs" = yes; then
! 6309: # Hardcode the library paths
! 6310: hardcode_libdirs=
! 6311: dep_rpath=
! 6312: rpath="$finalize_rpath"
! 6313: test "$mode" != relink && rpath="$compile_rpath$rpath"
! 6314: for libdir in $rpath; do
! 6315: if test -n "$hardcode_libdir_flag_spec"; then
! 6316: if test -n "$hardcode_libdir_separator"; then
! 6317: if test -z "$hardcode_libdirs"; then
! 6318: hardcode_libdirs="$libdir"
! 6319: else
! 6320: # Just accumulate the unique libdirs.
! 6321: case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
! 6322: *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
! 6323: ;;
! 6324: *)
! 6325: hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
! 6326: ;;
! 6327: esac
! 6328: fi
! 6329: else
! 6330: eval flag=\"$hardcode_libdir_flag_spec\"
! 6331: dep_rpath="$dep_rpath $flag"
! 6332: fi
! 6333: elif test -n "$runpath_var"; then
! 6334: case "$perm_rpath " in
! 6335: *" $libdir "*) ;;
! 6336: *) perm_rpath="$perm_rpath $libdir" ;;
! 6337: esac
! 6338: fi
! 6339: done
! 6340: # Substitute the hardcoded libdirs into the rpath.
! 6341: if test -n "$hardcode_libdir_separator" &&
! 6342: test -n "$hardcode_libdirs"; then
! 6343: libdir="$hardcode_libdirs"
! 6344: if test -n "$hardcode_libdir_flag_spec_ld"; then
! 6345: eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\"
! 6346: else
! 6347: eval dep_rpath=\"$hardcode_libdir_flag_spec\"
! 6348: fi
! 6349: fi
! 6350: if test -n "$runpath_var" && test -n "$perm_rpath"; then
! 6351: # We should set the runpath_var.
! 6352: rpath=
! 6353: for dir in $perm_rpath; do
! 6354: rpath="$rpath$dir:"
! 6355: done
! 6356: eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
! 6357: fi
! 6358: test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
! 6359: fi
! 6360:
! 6361: shlibpath="$finalize_shlibpath"
! 6362: test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
! 6363: if test -n "$shlibpath"; then
! 6364: eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
! 6365: fi
! 6366:
! 6367: # Get the real and link names of the library.
! 6368: eval shared_ext=\"$shrext_cmds\"
! 6369: eval library_names=\"$library_names_spec\"
! 6370: set dummy $library_names
! 6371: shift
! 6372: realname="$1"
! 6373: shift
! 6374:
! 6375: if test -n "$soname_spec"; then
! 6376: eval soname=\"$soname_spec\"
! 6377: else
! 6378: soname="$realname"
! 6379: fi
! 6380: if test -z "$dlname"; then
! 6381: dlname=$soname
! 6382: fi
! 6383:
! 6384: lib="$output_objdir/$realname"
! 6385: linknames=
! 6386: for link
! 6387: do
! 6388: linknames="$linknames $link"
! 6389: done
! 6390:
! 6391: # Use standard objects if they are pic
! 6392: test -z "$pic_flag" && libobjs=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
! 6393: test "X$libobjs" = "X " && libobjs=
! 6394:
! 6395: delfiles=
! 6396: if test -n "$export_symbols" && test -n "$include_expsyms"; then
! 6397: $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
! 6398: export_symbols="$output_objdir/$libname.uexp"
! 6399: delfiles="$delfiles $export_symbols"
! 6400: fi
! 6401:
! 6402: orig_export_symbols=
! 6403: case $host_os in
! 6404: cygwin* | mingw*)
! 6405: if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
! 6406: # exporting using user supplied symfile
! 6407: if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
! 6408: # and it's NOT already a .def file. Must figure out
! 6409: # which of the given symbols are data symbols and tag
! 6410: # them as such. So, trigger use of export_symbols_cmds.
! 6411: # export_symbols gets reassigned inside the "prepare
! 6412: # the list of exported symbols" if statement, so the
! 6413: # include_expsyms logic still works.
! 6414: orig_export_symbols="$export_symbols"
! 6415: export_symbols=
! 6416: always_export_symbols=yes
! 6417: fi
! 6418: fi
! 6419: ;;
! 6420: esac
! 6421:
! 6422: # Prepare the list of exported symbols
! 6423: if test -z "$export_symbols"; then
! 6424: if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
! 6425: func_verbose "generating symbol list for \`$libname.la'"
! 6426: export_symbols="$output_objdir/$libname.exp"
! 6427: $opt_dry_run || $RM $export_symbols
! 6428: cmds=$export_symbols_cmds
! 6429: save_ifs="$IFS"; IFS='~'
! 6430: for cmd in $cmds; do
! 6431: IFS="$save_ifs"
! 6432: eval cmd=\"$cmd\"
! 6433: if len=`expr "X$cmd" : ".*"` &&
! 6434: test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
! 6435: func_show_eval "$cmd" 'exit $?'
! 6436: skipped_export=false
! 6437: else
! 6438: # The command line is too long to execute in one step.
! 6439: func_verbose "using reloadable object file for export list..."
! 6440: skipped_export=:
! 6441: # Break out early, otherwise skipped_export may be
! 6442: # set to false by a later but shorter cmd.
! 6443: break
! 6444: fi
! 6445: done
! 6446: IFS="$save_ifs"
! 6447: if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then
! 6448: func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
! 6449: func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
! 6450: fi
! 6451: fi
! 6452: fi
! 6453:
! 6454: if test -n "$export_symbols" && test -n "$include_expsyms"; then
! 6455: tmp_export_symbols="$export_symbols"
! 6456: test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
! 6457: $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
! 6458: fi
! 6459:
! 6460: if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
! 6461: # The given exports_symbols file has to be filtered, so filter it.
! 6462: func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
! 6463: # FIXME: $output_objdir/$libname.filter potentially contains lots of
! 6464: # 's' commands which not all seds can handle. GNU sed should be fine
! 6465: # though. Also, the filter scales superlinearly with the number of
! 6466: # global variables. join(1) would be nice here, but unfortunately
! 6467: # isn't a blessed tool.
! 6468: $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
! 6469: delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
! 6470: export_symbols=$output_objdir/$libname.def
! 6471: $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
! 6472: fi
! 6473:
! 6474: tmp_deplibs=
! 6475: for test_deplib in $deplibs; do
! 6476: case " $convenience " in
! 6477: *" $test_deplib "*) ;;
! 6478: *)
! 6479: tmp_deplibs="$tmp_deplibs $test_deplib"
! 6480: ;;
! 6481: esac
! 6482: done
! 6483: deplibs="$tmp_deplibs"
! 6484:
! 6485: if test -n "$convenience"; then
! 6486: if test -n "$whole_archive_flag_spec" &&
! 6487: test "$compiler_needs_object" = yes &&
! 6488: test -z "$libobjs"; then
! 6489: # extract the archives, so we have objects to list.
! 6490: # TODO: could optimize this to just extract one archive.
! 6491: whole_archive_flag_spec=
! 6492: fi
! 6493: if test -n "$whole_archive_flag_spec"; then
! 6494: save_libobjs=$libobjs
! 6495: eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
! 6496: test "X$libobjs" = "X " && libobjs=
! 6497: else
! 6498: gentop="$output_objdir/${outputname}x"
! 6499: generated="$generated $gentop"
! 6500:
! 6501: func_extract_archives $gentop $convenience
! 6502: libobjs="$libobjs $func_extract_archives_result"
! 6503: test "X$libobjs" = "X " && libobjs=
! 6504: fi
! 6505: fi
! 6506:
! 6507: if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
! 6508: eval flag=\"$thread_safe_flag_spec\"
! 6509: linker_flags="$linker_flags $flag"
! 6510: fi
! 6511:
! 6512: # Make a backup of the uninstalled library when relinking
! 6513: if test "$mode" = relink; then
! 6514: $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
! 6515: fi
! 6516:
! 6517: # Do each of the archive commands.
! 6518: if test "$module" = yes && test -n "$module_cmds" ; then
! 6519: if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
! 6520: eval test_cmds=\"$module_expsym_cmds\"
! 6521: cmds=$module_expsym_cmds
! 6522: else
! 6523: eval test_cmds=\"$module_cmds\"
! 6524: cmds=$module_cmds
! 6525: fi
! 6526: else
! 6527: if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
! 6528: eval test_cmds=\"$archive_expsym_cmds\"
! 6529: cmds=$archive_expsym_cmds
! 6530: else
! 6531: eval test_cmds=\"$archive_cmds\"
! 6532: cmds=$archive_cmds
! 6533: fi
! 6534: fi
! 6535:
! 6536: if test "X$skipped_export" != "X:" &&
! 6537: len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
! 6538: test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
! 6539: :
! 6540: else
! 6541: # The command line is too long to link in one step, link piecewise
! 6542: # or, if using GNU ld and skipped_export is not :, use a linker
! 6543: # script.
! 6544:
! 6545: # Save the value of $output and $libobjs because we want to
! 6546: # use them later. If we have whole_archive_flag_spec, we
! 6547: # want to use save_libobjs as it was before
! 6548: # whole_archive_flag_spec was expanded, because we can't
! 6549: # assume the linker understands whole_archive_flag_spec.
! 6550: # This may have to be revisited, in case too many
! 6551: # convenience libraries get linked in and end up exceeding
! 6552: # the spec.
! 6553: if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
! 6554: save_libobjs=$libobjs
! 6555: fi
! 6556: save_output=$output
! 6557: output_la=`$ECHO "X$output" | $Xsed -e "$basename"`
! 6558:
! 6559: # Clear the reloadable object creation command queue and
! 6560: # initialize k to one.
! 6561: test_cmds=
! 6562: concat_cmds=
! 6563: objlist=
! 6564: last_robj=
! 6565: k=1
! 6566:
! 6567: if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
! 6568: output=${output_objdir}/${output_la}.lnkscript
! 6569: func_verbose "creating GNU ld script: $output"
! 6570: $ECHO 'INPUT (' > $output
! 6571: for obj in $save_libobjs
! 6572: do
! 6573: $ECHO "$obj" >> $output
! 6574: done
! 6575: $ECHO ')' >> $output
! 6576: delfiles="$delfiles $output"
! 6577: elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
! 6578: output=${output_objdir}/${output_la}.lnk
! 6579: func_verbose "creating linker input file list: $output"
! 6580: : > $output
! 6581: set x $save_libobjs
! 6582: shift
! 6583: firstobj=
! 6584: if test "$compiler_needs_object" = yes; then
! 6585: firstobj="$1 "
! 6586: shift
! 6587: fi
! 6588: for obj
! 6589: do
! 6590: $ECHO "$obj" >> $output
! 6591: done
! 6592: delfiles="$delfiles $output"
! 6593: output=$firstobj\"$file_list_spec$output\"
! 6594: else
! 6595: if test -n "$save_libobjs"; then
! 6596: func_verbose "creating reloadable object files..."
! 6597: output=$output_objdir/$output_la-${k}.$objext
! 6598: # Loop over the list of objects to be linked.
! 6599: for obj in $save_libobjs
! 6600: do
! 6601: eval test_cmds=\"$reload_cmds $objlist $last_robj\"
! 6602: if test "X$objlist" = X ||
! 6603: { len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
! 6604: test "$len" -le "$max_cmd_len"; }; then
! 6605: objlist="$objlist $obj"
! 6606: else
! 6607: # The command $test_cmds is almost too long, add a
! 6608: # command to the queue.
! 6609: if test "$k" -eq 1 ; then
! 6610: # The first file doesn't have a previous command to add.
! 6611: eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
! 6612: else
! 6613: # All subsequent reloadable object files will link in
! 6614: # the last one created.
! 6615: eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj~\$RM $last_robj\"
! 6616: fi
! 6617: last_robj=$output_objdir/$output_la-${k}.$objext
! 6618: k=`expr $k + 1`
! 6619: output=$output_objdir/$output_la-${k}.$objext
! 6620: objlist=$obj
! 6621: len=1
! 6622: fi
! 6623: done
! 6624: # Handle the remaining objects by creating one last
! 6625: # reloadable object file. All subsequent reloadable object
! 6626: # files will link in the last one created.
! 6627: test -z "$concat_cmds" || concat_cmds=$concat_cmds~
! 6628: eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
! 6629: if test -n "$last_robj"; then
! 6630: eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
! 6631: fi
! 6632: delfiles="$delfiles $output"
! 6633:
! 6634: else
! 6635: output=
! 6636: fi
! 6637:
! 6638: if ${skipped_export-false}; then
! 6639: func_verbose "generating symbol list for \`$libname.la'"
! 6640: export_symbols="$output_objdir/$libname.exp"
! 6641: $opt_dry_run || $RM $export_symbols
! 6642: libobjs=$output
! 6643: # Append the command to create the export file.
! 6644: test -z "$concat_cmds" || concat_cmds=$concat_cmds~
! 6645: eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\"
! 6646: if test -n "$last_robj"; then
! 6647: eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
! 6648: fi
! 6649: fi
! 6650:
! 6651: test -n "$save_libobjs" &&
! 6652: func_verbose "creating a temporary reloadable object file: $output"
! 6653:
! 6654: # Loop through the commands generated above and execute them.
! 6655: save_ifs="$IFS"; IFS='~'
! 6656: for cmd in $concat_cmds; do
! 6657: IFS="$save_ifs"
! 6658: $opt_silent || {
! 6659: func_quote_for_expand "$cmd"
! 6660: eval "func_echo $func_quote_for_expand_result"
! 6661: }
! 6662: $opt_dry_run || eval "$cmd" || {
! 6663: lt_exit=$?
! 6664:
! 6665: # Restore the uninstalled library and exit
! 6666: if test "$mode" = relink; then
! 6667: ( cd "$output_objdir" && \
! 6668: $RM "${realname}T" && \
! 6669: $MV "${realname}U" "$realname" )
! 6670: fi
! 6671:
! 6672: exit $lt_exit
! 6673: }
! 6674: done
! 6675: IFS="$save_ifs"
! 6676:
! 6677: if test -n "$export_symbols_regex" && ${skipped_export-false}; then
! 6678: func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
! 6679: func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
! 6680: fi
! 6681: fi
! 6682:
! 6683: if ${skipped_export-false}; then
! 6684: if test -n "$export_symbols" && test -n "$include_expsyms"; then
! 6685: tmp_export_symbols="$export_symbols"
! 6686: test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
! 6687: $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
! 6688: fi
! 6689:
! 6690: if test -n "$orig_export_symbols"; then
! 6691: # The given exports_symbols file has to be filtered, so filter it.
! 6692: func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
! 6693: # FIXME: $output_objdir/$libname.filter potentially contains lots of
! 6694: # 's' commands which not all seds can handle. GNU sed should be fine
! 6695: # though. Also, the filter scales superlinearly with the number of
! 6696: # global variables. join(1) would be nice here, but unfortunately
! 6697: # isn't a blessed tool.
! 6698: $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
! 6699: delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
! 6700: export_symbols=$output_objdir/$libname.def
! 6701: $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
! 6702: fi
! 6703: fi
! 6704:
! 6705: libobjs=$output
! 6706: # Restore the value of output.
! 6707: output=$save_output
! 6708:
! 6709: if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
! 6710: eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
! 6711: test "X$libobjs" = "X " && libobjs=
! 6712: fi
! 6713: # Expand the library linking commands again to reset the
! 6714: # value of $libobjs for piecewise linking.
! 6715:
! 6716: # Do each of the archive commands.
! 6717: if test "$module" = yes && test -n "$module_cmds" ; then
! 6718: if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
! 6719: cmds=$module_expsym_cmds
! 6720: else
! 6721: cmds=$module_cmds
! 6722: fi
! 6723: else
! 6724: if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
! 6725: cmds=$archive_expsym_cmds
! 6726: else
! 6727: cmds=$archive_cmds
! 6728: fi
! 6729: fi
! 6730: fi
! 6731:
! 6732: if test -n "$delfiles"; then
! 6733: # Append the command to remove temporary files to $cmds.
! 6734: eval cmds=\"\$cmds~\$RM $delfiles\"
! 6735: fi
! 6736:
! 6737: # Add any objects from preloaded convenience libraries
! 6738: if test -n "$dlprefiles"; then
! 6739: gentop="$output_objdir/${outputname}x"
! 6740: generated="$generated $gentop"
! 6741:
! 6742: func_extract_archives $gentop $dlprefiles
! 6743: libobjs="$libobjs $func_extract_archives_result"
! 6744: test "X$libobjs" = "X " && libobjs=
! 6745: fi
! 6746:
! 6747: save_ifs="$IFS"; IFS='~'
! 6748: for cmd in $cmds; do
! 6749: IFS="$save_ifs"
! 6750: eval cmd=\"$cmd\"
! 6751: $opt_silent || {
! 6752: func_quote_for_expand "$cmd"
! 6753: eval "func_echo $func_quote_for_expand_result"
! 6754: }
! 6755: $opt_dry_run || eval "$cmd" || {
! 6756: lt_exit=$?
! 6757:
! 6758: # Restore the uninstalled library and exit
! 6759: if test "$mode" = relink; then
! 6760: ( cd "$output_objdir" && \
! 6761: $RM "${realname}T" && \
! 6762: $MV "${realname}U" "$realname" )
! 6763: fi
! 6764:
! 6765: exit $lt_exit
! 6766: }
! 6767: done
! 6768: IFS="$save_ifs"
! 6769:
! 6770: # Restore the uninstalled library and exit
! 6771: if test "$mode" = relink; then
! 6772: $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
! 6773:
! 6774: if test -n "$convenience"; then
! 6775: if test -z "$whole_archive_flag_spec"; then
! 6776: func_show_eval '${RM}r "$gentop"'
! 6777: fi
! 6778: fi
! 6779:
! 6780: exit $EXIT_SUCCESS
! 6781: fi
! 6782:
! 6783: # Create links to the real library.
! 6784: for linkname in $linknames; do
! 6785: if test "$realname" != "$linkname"; then
! 6786: func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?'
! 6787: fi
! 6788: done
! 6789:
! 6790: # If -module or -export-dynamic was specified, set the dlname.
! 6791: if test "$module" = yes || test "$export_dynamic" = yes; then
! 6792: # On all known operating systems, these are identical.
! 6793: dlname="$soname"
! 6794: fi
! 6795: fi
! 6796: ;;
! 6797:
! 6798: obj)
! 6799: if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
! 6800: func_warning "\`-dlopen' is ignored for objects"
! 6801: fi
! 6802:
! 6803: case " $deplibs" in
! 6804: *\ -l* | *\ -L*)
! 6805: func_warning "\`-l' and \`-L' are ignored for objects" ;;
! 6806: esac
! 6807:
! 6808: test -n "$rpath" && \
! 6809: func_warning "\`-rpath' is ignored for objects"
! 6810:
! 6811: test -n "$xrpath" && \
! 6812: func_warning "\`-R' is ignored for objects"
! 6813:
! 6814: test -n "$vinfo" && \
! 6815: func_warning "\`-version-info' is ignored for objects"
! 6816:
! 6817: test -n "$release" && \
! 6818: func_warning "\`-release' is ignored for objects"
! 6819:
! 6820: case $output in
! 6821: *.lo)
! 6822: test -n "$objs$old_deplibs" && \
! 6823: func_fatal_error "cannot build library object \`$output' from non-libtool objects"
! 6824:
! 6825: libobj=$output
! 6826: func_lo2o "$libobj"
! 6827: obj=$func_lo2o_result
! 6828: ;;
! 6829: *)
! 6830: libobj=
! 6831: obj="$output"
! 6832: ;;
! 6833: esac
! 6834:
! 6835: # Delete the old objects.
! 6836: $opt_dry_run || $RM $obj $libobj
! 6837:
! 6838: # Objects from convenience libraries. This assumes
! 6839: # single-version convenience libraries. Whenever we create
! 6840: # different ones for PIC/non-PIC, this we'll have to duplicate
! 6841: # the extraction.
! 6842: reload_conv_objs=
! 6843: gentop=
! 6844: # reload_cmds runs $LD directly, so let us get rid of
! 6845: # -Wl from whole_archive_flag_spec and hope we can get by with
! 6846: # turning comma into space..
! 6847: wl=
! 6848:
! 6849: if test -n "$convenience"; then
! 6850: if test -n "$whole_archive_flag_spec"; then
! 6851: eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
! 6852: reload_conv_objs=$reload_objs\ `$ECHO "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'`
! 6853: else
! 6854: gentop="$output_objdir/${obj}x"
! 6855: generated="$generated $gentop"
! 6856:
! 6857: func_extract_archives $gentop $convenience
! 6858: reload_conv_objs="$reload_objs $func_extract_archives_result"
! 6859: fi
! 6860: fi
! 6861:
! 6862: # Create the old-style object.
! 6863: reload_objs="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
! 6864:
! 6865: output="$obj"
! 6866: func_execute_cmds "$reload_cmds" 'exit $?'
! 6867:
! 6868: # Exit if we aren't doing a library object file.
! 6869: if test -z "$libobj"; then
! 6870: if test -n "$gentop"; then
! 6871: func_show_eval '${RM}r "$gentop"'
! 6872: fi
! 6873:
! 6874: exit $EXIT_SUCCESS
! 6875: fi
! 6876:
! 6877: if test "$build_libtool_libs" != yes; then
! 6878: if test -n "$gentop"; then
! 6879: func_show_eval '${RM}r "$gentop"'
! 6880: fi
! 6881:
! 6882: # Create an invalid libtool object if no PIC, so that we don't
! 6883: # accidentally link it into a program.
! 6884: # $show "echo timestamp > $libobj"
! 6885: # $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
! 6886: exit $EXIT_SUCCESS
! 6887: fi
! 6888:
! 6889: if test -n "$pic_flag" || test "$pic_mode" != default; then
! 6890: # Only do commands if we really have different PIC objects.
! 6891: reload_objs="$libobjs $reload_conv_objs"
! 6892: output="$libobj"
! 6893: func_execute_cmds "$reload_cmds" 'exit $?'
! 6894: fi
! 6895:
! 6896: if test -n "$gentop"; then
! 6897: func_show_eval '${RM}r "$gentop"'
! 6898: fi
! 6899:
! 6900: exit $EXIT_SUCCESS
! 6901: ;;
! 6902:
! 6903: prog)
! 6904: case $host in
! 6905: *cygwin*) func_stripname '' '.exe' "$output"
! 6906: output=$func_stripname_result.exe;;
! 6907: esac
! 6908: test -n "$vinfo" && \
! 6909: func_warning "\`-version-info' is ignored for programs"
! 6910:
! 6911: test -n "$release" && \
! 6912: func_warning "\`-release' is ignored for programs"
! 6913:
! 6914: test "$preload" = yes \
! 6915: && test "$dlopen_support" = unknown \
! 6916: && test "$dlopen_self" = unknown \
! 6917: && test "$dlopen_self_static" = unknown && \
! 6918: func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support."
! 6919:
! 6920: case $host in
! 6921: *-*-rhapsody* | *-*-darwin1.[012])
! 6922: # On Rhapsody replace the C library is the System framework
! 6923: compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
! 6924: finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
! 6925: ;;
! 6926: esac
! 6927:
! 6928: case $host in
! 6929: *-*-darwin*)
! 6930: # Don't allow lazy linking, it breaks C++ global constructors
! 6931: # But is supposedly fixed on 10.4 or later (yay!).
! 6932: if test "$tagname" = CXX ; then
! 6933: case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
! 6934: 10.[0123])
! 6935: compile_command="$compile_command ${wl}-bind_at_load"
! 6936: finalize_command="$finalize_command ${wl}-bind_at_load"
! 6937: ;;
! 6938: esac
! 6939: fi
! 6940: # Time to change all our "foo.ltframework" stuff back to "-framework foo"
! 6941: compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
! 6942: finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
! 6943: ;;
! 6944: esac
! 6945:
! 6946:
! 6947: # move library search paths that coincide with paths to not yet
! 6948: # installed libraries to the beginning of the library search list
! 6949: new_libs=
! 6950: for path in $notinst_path; do
! 6951: case " $new_libs " in
! 6952: *" -L$path/$objdir "*) ;;
! 6953: *)
! 6954: case " $compile_deplibs " in
! 6955: *" -L$path/$objdir "*)
! 6956: new_libs="$new_libs -L$path/$objdir" ;;
! 6957: esac
! 6958: ;;
! 6959: esac
! 6960: done
! 6961: for deplib in $compile_deplibs; do
! 6962: case $deplib in
! 6963: -L*)
! 6964: case " $new_libs " in
! 6965: *" $deplib "*) ;;
! 6966: *) new_libs="$new_libs $deplib" ;;
! 6967: esac
! 6968: ;;
! 6969: *) new_libs="$new_libs $deplib" ;;
! 6970: esac
! 6971: done
! 6972: compile_deplibs="$new_libs"
! 6973:
! 6974:
! 6975: compile_command="$compile_command $compile_deplibs"
! 6976: finalize_command="$finalize_command $finalize_deplibs"
! 6977:
! 6978: if test -n "$rpath$xrpath"; then
! 6979: # If the user specified any rpath flags, then add them.
! 6980: for libdir in $rpath $xrpath; do
! 6981: # This is the magic to use -rpath.
! 6982: case "$finalize_rpath " in
! 6983: *" $libdir "*) ;;
! 6984: *) finalize_rpath="$finalize_rpath $libdir" ;;
! 6985: esac
! 6986: done
! 6987: fi
! 6988:
! 6989: # Now hardcode the library paths
! 6990: rpath=
! 6991: hardcode_libdirs=
! 6992: for libdir in $compile_rpath $finalize_rpath; do
! 6993: if test -n "$hardcode_libdir_flag_spec"; then
! 6994: if test -n "$hardcode_libdir_separator"; then
! 6995: if test -z "$hardcode_libdirs"; then
! 6996: hardcode_libdirs="$libdir"
! 6997: else
! 6998: # Just accumulate the unique libdirs.
! 6999: case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
! 7000: *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
! 7001: ;;
! 7002: *)
! 7003: hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
! 7004: ;;
! 7005: esac
! 7006: fi
! 7007: else
! 7008: eval flag=\"$hardcode_libdir_flag_spec\"
! 7009: rpath="$rpath $flag"
! 7010: fi
! 7011: elif test -n "$runpath_var"; then
! 7012: case "$perm_rpath " in
! 7013: *" $libdir "*) ;;
! 7014: *) perm_rpath="$perm_rpath $libdir" ;;
! 7015: esac
! 7016: fi
! 7017: case $host in
! 7018: *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
! 7019: testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
! 7020: case :$dllsearchpath: in
! 7021: *":$libdir:"*) ;;
! 7022: *) dllsearchpath="$dllsearchpath:$libdir";;
! 7023: esac
! 7024: case :$dllsearchpath: in
! 7025: *":$testbindir:"*) ;;
! 7026: *) dllsearchpath="$dllsearchpath:$testbindir";;
! 7027: esac
! 7028: ;;
! 7029: esac
! 7030: done
! 7031: # Substitute the hardcoded libdirs into the rpath.
! 7032: if test -n "$hardcode_libdir_separator" &&
! 7033: test -n "$hardcode_libdirs"; then
! 7034: libdir="$hardcode_libdirs"
! 7035: eval rpath=\" $hardcode_libdir_flag_spec\"
! 7036: fi
! 7037: compile_rpath="$rpath"
! 7038:
! 7039: rpath=
! 7040: hardcode_libdirs=
! 7041: for libdir in $finalize_rpath; do
! 7042: if test -n "$hardcode_libdir_flag_spec"; then
! 7043: if test -n "$hardcode_libdir_separator"; then
! 7044: if test -z "$hardcode_libdirs"; then
! 7045: hardcode_libdirs="$libdir"
! 7046: else
! 7047: # Just accumulate the unique libdirs.
! 7048: case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
! 7049: *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
! 7050: ;;
! 7051: *)
! 7052: hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
! 7053: ;;
! 7054: esac
! 7055: fi
! 7056: else
! 7057: eval flag=\"$hardcode_libdir_flag_spec\"
! 7058: rpath="$rpath $flag"
! 7059: fi
! 7060: elif test -n "$runpath_var"; then
! 7061: case "$finalize_perm_rpath " in
! 7062: *" $libdir "*) ;;
! 7063: *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
! 7064: esac
! 7065: fi
! 7066: done
! 7067: # Substitute the hardcoded libdirs into the rpath.
! 7068: if test -n "$hardcode_libdir_separator" &&
! 7069: test -n "$hardcode_libdirs"; then
! 7070: libdir="$hardcode_libdirs"
! 7071: eval rpath=\" $hardcode_libdir_flag_spec\"
! 7072: fi
! 7073: finalize_rpath="$rpath"
! 7074:
! 7075: if test -n "$libobjs" && test "$build_old_libs" = yes; then
! 7076: # Transform all the library objects into standard objects.
! 7077: compile_command=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
! 7078: finalize_command=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
! 7079: fi
! 7080:
! 7081: func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
! 7082:
! 7083: # template prelinking step
! 7084: if test -n "$prelink_cmds"; then
! 7085: func_execute_cmds "$prelink_cmds" 'exit $?'
! 7086: fi
! 7087:
! 7088: wrappers_required=yes
! 7089: case $host in
! 7090: *cygwin* | *mingw* )
! 7091: if test "$build_libtool_libs" != yes; then
! 7092: wrappers_required=no
! 7093: fi
! 7094: ;;
! 7095: *)
! 7096: if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
! 7097: wrappers_required=no
! 7098: fi
! 7099: ;;
! 7100: esac
! 7101: if test "$wrappers_required" = no; then
! 7102: # Replace the output file specification.
! 7103: compile_command=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
! 7104: link_command="$compile_command$compile_rpath"
! 7105:
! 7106: # We have no uninstalled library dependencies, so finalize right now.
! 7107: exit_status=0
! 7108: func_show_eval "$link_command" 'exit_status=$?'
! 7109:
! 7110: # Delete the generated files.
! 7111: if test -f "$output_objdir/${outputname}S.${objext}"; then
! 7112: func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
! 7113: fi
! 7114:
! 7115: exit $exit_status
! 7116: fi
! 7117:
! 7118: if test -n "$compile_shlibpath$finalize_shlibpath"; then
! 7119: compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
! 7120: fi
! 7121: if test -n "$finalize_shlibpath"; then
! 7122: finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
! 7123: fi
! 7124:
! 7125: compile_var=
! 7126: finalize_var=
! 7127: if test -n "$runpath_var"; then
! 7128: if test -n "$perm_rpath"; then
! 7129: # We should set the runpath_var.
! 7130: rpath=
! 7131: for dir in $perm_rpath; do
! 7132: rpath="$rpath$dir:"
! 7133: done
! 7134: compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
! 7135: fi
! 7136: if test -n "$finalize_perm_rpath"; then
! 7137: # We should set the runpath_var.
! 7138: rpath=
! 7139: for dir in $finalize_perm_rpath; do
! 7140: rpath="$rpath$dir:"
! 7141: done
! 7142: finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
! 7143: fi
! 7144: fi
! 7145:
! 7146: if test "$no_install" = yes; then
! 7147: # We don't need to create a wrapper script.
! 7148: link_command="$compile_var$compile_command$compile_rpath"
! 7149: # Replace the output file specification.
! 7150: link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
! 7151: # Delete the old output file.
! 7152: $opt_dry_run || $RM $output
! 7153: # Link the executable and exit
! 7154: func_show_eval "$link_command" 'exit $?'
! 7155: exit $EXIT_SUCCESS
! 7156: fi
! 7157:
! 7158: if test "$hardcode_action" = relink; then
! 7159: # Fast installation is not supported
! 7160: link_command="$compile_var$compile_command$compile_rpath"
! 7161: relink_command="$finalize_var$finalize_command$finalize_rpath"
! 7162:
! 7163: func_warning "this platform does not like uninstalled shared libraries"
! 7164: func_warning "\`$output' will be relinked during installation"
! 7165: else
! 7166: if test "$fast_install" != no; then
! 7167: link_command="$finalize_var$compile_command$finalize_rpath"
! 7168: if test "$fast_install" = yes; then
! 7169: relink_command=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
! 7170: else
! 7171: # fast_install is set to needless
! 7172: relink_command=
! 7173: fi
! 7174: else
! 7175: link_command="$compile_var$compile_command$compile_rpath"
! 7176: relink_command="$finalize_var$finalize_command$finalize_rpath"
! 7177: fi
! 7178: fi
! 7179:
! 7180: # Replace the output file specification.
! 7181: link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
! 7182:
! 7183: # Delete the old output files.
! 7184: $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
! 7185:
! 7186: func_show_eval "$link_command" 'exit $?'
! 7187:
! 7188: # Now create the wrapper script.
! 7189: func_verbose "creating $output"
! 7190:
! 7191: # Quote the relink command for shipping.
! 7192: if test -n "$relink_command"; then
! 7193: # Preserve any variables that may affect compiler behavior
! 7194: for var in $variables_saved_for_relink; do
! 7195: if eval test -z \"\${$var+set}\"; then
! 7196: relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
! 7197: elif eval var_value=\$$var; test -z "$var_value"; then
! 7198: relink_command="$var=; export $var; $relink_command"
! 7199: else
! 7200: func_quote_for_eval "$var_value"
! 7201: relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
! 7202: fi
! 7203: done
! 7204: relink_command="(cd `pwd`; $relink_command)"
! 7205: relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
! 7206: fi
! 7207:
! 7208: # Quote $ECHO for shipping.
! 7209: if test "X$ECHO" = "X$SHELL $progpath --fallback-echo"; then
! 7210: case $progpath in
! 7211: [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
! 7212: *) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
! 7213: esac
! 7214: qecho=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"`
! 7215: else
! 7216: qecho=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"`
! 7217: fi
! 7218:
! 7219: # Only actually do things if not in dry run mode.
! 7220: $opt_dry_run || {
! 7221: # win32 will think the script is a binary if it has
! 7222: # a .exe suffix, so we strip it off here.
! 7223: case $output in
! 7224: *.exe) func_stripname '' '.exe' "$output"
! 7225: output=$func_stripname_result ;;
! 7226: esac
! 7227: # test for cygwin because mv fails w/o .exe extensions
! 7228: case $host in
! 7229: *cygwin*)
! 7230: exeext=.exe
! 7231: func_stripname '' '.exe' "$outputname"
! 7232: outputname=$func_stripname_result ;;
! 7233: *) exeext= ;;
! 7234: esac
! 7235: case $host in
! 7236: *cygwin* | *mingw* )
! 7237: func_dirname_and_basename "$output" "" "."
! 7238: output_name=$func_basename_result
! 7239: output_path=$func_dirname_result
! 7240: cwrappersource="$output_path/$objdir/lt-$output_name.c"
! 7241: cwrapper="$output_path/$output_name.exe"
! 7242: $RM $cwrappersource $cwrapper
! 7243: trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
! 7244:
! 7245: func_emit_cwrapperexe_src > $cwrappersource
! 7246:
! 7247: # we should really use a build-platform specific compiler
! 7248: # here, but OTOH, the wrappers (shell script and this C one)
! 7249: # are only useful if you want to execute the "real" binary.
! 7250: # Since the "real" binary is built for $host, then this
! 7251: # wrapper might as well be built for $host, too.
! 7252: $opt_dry_run || {
! 7253: $LTCC $LTCFLAGS -o $cwrapper $cwrappersource
! 7254: $STRIP $cwrapper
! 7255: }
! 7256:
! 7257: # Now, create the wrapper script for func_source use:
! 7258: func_ltwrapper_scriptname $cwrapper
! 7259: $RM $func_ltwrapper_scriptname_result
! 7260: trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
! 7261: $opt_dry_run || {
! 7262: # note: this script will not be executed, so do not chmod.
! 7263: if test "x$build" = "x$host" ; then
! 7264: $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
! 7265: else
! 7266: func_emit_wrapper no > $func_ltwrapper_scriptname_result
! 7267: fi
! 7268: }
! 7269: ;;
! 7270: * )
! 7271: $RM $output
! 7272: trap "$RM $output; exit $EXIT_FAILURE" 1 2 15
! 7273:
! 7274: func_emit_wrapper no > $output
! 7275: chmod +x $output
! 7276: ;;
! 7277: esac
! 7278: }
! 7279: exit $EXIT_SUCCESS
! 7280: ;;
! 7281: esac
! 7282:
! 7283: # See if we need to build an old-fashioned archive.
! 7284: for oldlib in $oldlibs; do
! 7285:
! 7286: if test "$build_libtool_libs" = convenience; then
! 7287: oldobjs="$libobjs_save $symfileobj"
! 7288: addlibs="$convenience"
! 7289: build_libtool_libs=no
! 7290: else
! 7291: if test "$build_libtool_libs" = module; then
! 7292: oldobjs="$libobjs_save"
! 7293: build_libtool_libs=no
! 7294: else
! 7295: oldobjs="$old_deplibs $non_pic_objects"
! 7296: if test "$preload" = yes && test -f "$symfileobj"; then
! 7297: oldobjs="$oldobjs $symfileobj"
! 7298: fi
! 7299: fi
! 7300: addlibs="$old_convenience"
! 7301: fi
! 7302:
! 7303: if test -n "$addlibs"; then
! 7304: gentop="$output_objdir/${outputname}x"
! 7305: generated="$generated $gentop"
! 7306:
! 7307: func_extract_archives $gentop $addlibs
! 7308: oldobjs="$oldobjs $func_extract_archives_result"
! 7309: fi
! 7310:
! 7311: # Do each command in the archive commands.
! 7312: if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
! 7313: cmds=$old_archive_from_new_cmds
! 7314: else
! 7315:
! 7316: # Add any objects from preloaded convenience libraries
! 7317: if test -n "$dlprefiles"; then
! 7318: gentop="$output_objdir/${outputname}x"
! 7319: generated="$generated $gentop"
! 7320:
! 7321: func_extract_archives $gentop $dlprefiles
! 7322: oldobjs="$oldobjs $func_extract_archives_result"
! 7323: fi
! 7324:
! 7325: # POSIX demands no paths to be encoded in archives. We have
! 7326: # to avoid creating archives with duplicate basenames if we
! 7327: # might have to extract them afterwards, e.g., when creating a
! 7328: # static archive out of a convenience library, or when linking
! 7329: # the entirety of a libtool archive into another (currently
! 7330: # not supported by libtool).
! 7331: if (for obj in $oldobjs
! 7332: do
! 7333: func_basename "$obj"
! 7334: $ECHO "$func_basename_result"
! 7335: done | sort | sort -uc >/dev/null 2>&1); then
! 7336: :
! 7337: else
! 7338: $ECHO "copying selected object files to avoid basename conflicts..."
! 7339: gentop="$output_objdir/${outputname}x"
! 7340: generated="$generated $gentop"
! 7341: func_mkdir_p "$gentop"
! 7342: save_oldobjs=$oldobjs
! 7343: oldobjs=
! 7344: counter=1
! 7345: for obj in $save_oldobjs
! 7346: do
! 7347: func_basename "$obj"
! 7348: objbase="$func_basename_result"
! 7349: case " $oldobjs " in
! 7350: " ") oldobjs=$obj ;;
! 7351: *[\ /]"$objbase "*)
! 7352: while :; do
! 7353: # Make sure we don't pick an alternate name that also
! 7354: # overlaps.
! 7355: newobj=lt$counter-$objbase
! 7356: counter=`expr $counter + 1`
! 7357: case " $oldobjs " in
! 7358: *[\ /]"$newobj "*) ;;
! 7359: *) if test ! -f "$gentop/$newobj"; then break; fi ;;
! 7360: esac
! 7361: done
! 7362: func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
! 7363: oldobjs="$oldobjs $gentop/$newobj"
! 7364: ;;
! 7365: *) oldobjs="$oldobjs $obj" ;;
! 7366: esac
! 7367: done
! 7368: fi
! 7369: eval cmds=\"$old_archive_cmds\"
! 7370:
! 7371: if len=`expr "X$cmds" : ".*" 2>/dev/null` &&
! 7372: test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
! 7373: cmds=$old_archive_cmds
! 7374: else
! 7375: # the command line is too long to link in one step, link in parts
! 7376: func_verbose "using piecewise archive linking..."
! 7377: save_RANLIB=$RANLIB
! 7378: RANLIB=:
! 7379: objlist=
! 7380: concat_cmds=
! 7381: save_oldobjs=$oldobjs
! 7382: # Is there a better way of finding the last object in the list?
! 7383: for obj in $save_oldobjs
! 7384: do
! 7385: last_oldobj=$obj
! 7386: done
! 7387: for obj in $save_oldobjs
! 7388: do
! 7389: oldobjs="$objlist $obj"
! 7390: objlist="$objlist $obj"
! 7391: eval test_cmds=\"$old_archive_cmds\"
! 7392: if len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
! 7393: test "$len" -le "$max_cmd_len"; then
! 7394: :
! 7395: else
! 7396: # the above command should be used before it gets too long
! 7397: oldobjs=$objlist
! 7398: if test "$obj" = "$last_oldobj" ; then
! 7399: RANLIB=$save_RANLIB
! 7400: fi
! 7401: test -z "$concat_cmds" || concat_cmds=$concat_cmds~
! 7402: eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
! 7403: objlist=
! 7404: fi
! 7405: done
! 7406: RANLIB=$save_RANLIB
! 7407: oldobjs=$objlist
! 7408: if test "X$oldobjs" = "X" ; then
! 7409: eval cmds=\"\$concat_cmds\"
! 7410: else
! 7411: eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
! 7412: fi
! 7413: fi
! 7414: fi
! 7415: func_execute_cmds "$cmds" 'exit $?'
! 7416: done
! 7417:
! 7418: test -n "$generated" && \
! 7419: func_show_eval "${RM}r$generated"
! 7420:
! 7421: # Now create the libtool archive.
! 7422: case $output in
! 7423: *.la)
! 7424: old_library=
! 7425: test "$build_old_libs" = yes && old_library="$libname.$libext"
! 7426: func_verbose "creating $output"
! 7427:
! 7428: # Preserve any variables that may affect compiler behavior
! 7429: for var in $variables_saved_for_relink; do
! 7430: if eval test -z \"\${$var+set}\"; then
! 7431: relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
! 7432: elif eval var_value=\$$var; test -z "$var_value"; then
! 7433: relink_command="$var=; export $var; $relink_command"
! 7434: else
! 7435: func_quote_for_eval "$var_value"
! 7436: relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
! 7437: fi
! 7438: done
! 7439: # Quote the link command for shipping.
! 7440: relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
! 7441: relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
! 7442: if test "$hardcode_automatic" = yes ; then
! 7443: relink_command=
! 7444: fi
! 7445:
! 7446: # Only create the output if not a dry run.
! 7447: $opt_dry_run || {
! 7448: for installed in no yes; do
! 7449: if test "$installed" = yes; then
! 7450: if test -z "$install_libdir"; then
! 7451: break
! 7452: fi
! 7453: output="$output_objdir/$outputname"i
! 7454: # Replace all uninstalled libtool libraries with the installed ones
! 7455: newdependency_libs=
! 7456: for deplib in $dependency_libs; do
! 7457: case $deplib in
! 7458: *.la)
! 7459: func_basename "$deplib"
! 7460: name="$func_basename_result"
! 7461: eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
! 7462: test -z "$libdir" && \
! 7463: func_fatal_error "\`$deplib' is not a valid libtool archive"
! 7464: newdependency_libs="$newdependency_libs $libdir/$name"
! 7465: ;;
! 7466: *) newdependency_libs="$newdependency_libs $deplib" ;;
! 7467: esac
! 7468: done
! 7469: dependency_libs="$newdependency_libs"
! 7470: newdlfiles=
! 7471:
! 7472: for lib in $dlfiles; do
! 7473: case $lib in
! 7474: *.la)
! 7475: func_basename "$lib"
! 7476: name="$func_basename_result"
! 7477: eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
! 7478: test -z "$libdir" && \
! 7479: func_fatal_error "\`$lib' is not a valid libtool archive"
! 7480: newdlfiles="$newdlfiles $libdir/$name"
! 7481: ;;
! 7482: *) newdlfiles="$newdlfiles $lib" ;;
! 7483: esac
! 7484: done
! 7485: dlfiles="$newdlfiles"
! 7486: newdlprefiles=
! 7487: for lib in $dlprefiles; do
! 7488: case $lib in
! 7489: *.la)
! 7490: # Only pass preopened files to the pseudo-archive (for
! 7491: # eventual linking with the app. that links it) if we
! 7492: # didn't already link the preopened objects directly into
! 7493: # the library:
! 7494: func_basename "$lib"
! 7495: name="$func_basename_result"
! 7496: eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
! 7497: test -z "$libdir" && \
! 7498: func_fatal_error "\`$lib' is not a valid libtool archive"
! 7499: newdlprefiles="$newdlprefiles $libdir/$name"
! 7500: ;;
! 7501: esac
! 7502: done
! 7503: dlprefiles="$newdlprefiles"
! 7504: else
! 7505: newdlfiles=
! 7506: for lib in $dlfiles; do
! 7507: case $lib in
! 7508: [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
! 7509: *) abs=`pwd`"/$lib" ;;
! 7510: esac
! 7511: newdlfiles="$newdlfiles $abs"
! 7512: done
! 7513: dlfiles="$newdlfiles"
! 7514: newdlprefiles=
! 7515: for lib in $dlprefiles; do
! 7516: case $lib in
! 7517: [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
! 7518: *) abs=`pwd`"/$lib" ;;
! 7519: esac
! 7520: newdlprefiles="$newdlprefiles $abs"
! 7521: done
! 7522: dlprefiles="$newdlprefiles"
! 7523: fi
! 7524: $RM $output
! 7525: # place dlname in correct position for cygwin
! 7526: tdlname=$dlname
! 7527: case $host,$output,$installed,$module,$dlname in
! 7528: *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
! 7529: esac
! 7530: $ECHO > $output "\
! 7531: # $outputname - a libtool library file
! 7532: # Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
! 7533: #
! 7534: # Please DO NOT delete this file!
! 7535: # It is necessary for linking the library.
! 7536:
! 7537: # The name that we can dlopen(3).
! 7538: dlname='$tdlname'
! 7539:
! 7540: # Names of this library.
! 7541: library_names='$library_names'
! 7542:
! 7543: # The name of the static archive.
! 7544: old_library='$old_library'
! 7545:
! 7546: # Linker flags that can not go in dependency_libs.
! 7547: inherited_linker_flags='$new_inherited_linker_flags'
! 7548:
! 7549: # Libraries that this one depends upon.
! 7550: dependency_libs='$dependency_libs'
! 7551:
! 7552: # Names of additional weak libraries provided by this library
! 7553: weak_library_names='$weak_libs'
! 7554:
! 7555: # Version information for $libname.
! 7556: current=$current
! 7557: age=$age
! 7558: revision=$revision
! 7559:
! 7560: # Is this an already installed library?
! 7561: installed=$installed
! 7562:
! 7563: # Should we warn about portability when linking against -modules?
! 7564: shouldnotlink=$module
! 7565:
! 7566: # Files to dlopen/dlpreopen
! 7567: dlopen='$dlfiles'
! 7568: dlpreopen='$dlprefiles'
! 7569:
! 7570: # Directory that this library needs to be installed in:
! 7571: libdir='$install_libdir'"
! 7572: if test "$installed" = no && test "$need_relink" = yes; then
! 7573: $ECHO >> $output "\
! 7574: relink_command=\"$relink_command\""
! 7575: fi
! 7576: done
! 7577: }
! 7578:
! 7579: # Do a symbolic link so that the libtool archive can be found in
! 7580: # LD_LIBRARY_PATH before the program is installed.
! 7581: func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?'
! 7582: ;;
! 7583: esac
! 7584: exit $EXIT_SUCCESS
! 7585: }
! 7586:
! 7587: { test "$mode" = link || test "$mode" = relink; } &&
! 7588: func_mode_link ${1+"$@"}
! 7589:
! 7590:
! 7591: # func_mode_uninstall arg...
! 7592: func_mode_uninstall ()
! 7593: {
! 7594: $opt_debug
! 7595: RM="$nonopt"
! 7596: files=
! 7597: rmforce=
! 7598: exit_status=0
! 7599:
! 7600: # This variable tells wrapper scripts just to set variables rather
! 7601: # than running their programs.
! 7602: libtool_install_magic="$magic"
! 7603:
! 7604: for arg
! 7605: do
! 7606: case $arg in
! 7607: -f) RM="$RM $arg"; rmforce=yes ;;
! 7608: -*) RM="$RM $arg" ;;
! 7609: *) files="$files $arg" ;;
! 7610: esac
! 7611: done
! 7612:
! 7613: test -z "$RM" && \
! 7614: func_fatal_help "you must specify an RM program"
! 7615:
! 7616: rmdirs=
! 7617:
! 7618: origobjdir="$objdir"
! 7619: for file in $files; do
! 7620: func_dirname "$file" "" "."
! 7621: dir="$func_dirname_result"
! 7622: if test "X$dir" = X.; then
! 7623: objdir="$origobjdir"
! 7624: else
! 7625: objdir="$dir/$origobjdir"
! 7626: fi
! 7627: func_basename "$file"
! 7628: name="$func_basename_result"
! 7629: test "$mode" = uninstall && objdir="$dir"
! 7630:
! 7631: # Remember objdir for removal later, being careful to avoid duplicates
! 7632: if test "$mode" = clean; then
! 7633: case " $rmdirs " in
! 7634: *" $objdir "*) ;;
! 7635: *) rmdirs="$rmdirs $objdir" ;;
! 7636: esac
! 7637: fi
! 7638:
! 7639: # Don't error if the file doesn't exist and rm -f was used.
! 7640: if { test -L "$file"; } >/dev/null 2>&1 ||
! 7641: { test -h "$file"; } >/dev/null 2>&1 ||
! 7642: test -f "$file"; then
! 7643: :
! 7644: elif test -d "$file"; then
! 7645: exit_status=1
! 7646: continue
! 7647: elif test "$rmforce" = yes; then
! 7648: continue
! 7649: fi
! 7650:
! 7651: rmfiles="$file"
! 7652:
! 7653: case $name in
! 7654: *.la)
! 7655: # Possibly a libtool archive, so verify it.
! 7656: if func_lalib_p "$file"; then
! 7657: func_source $dir/$name
! 7658:
! 7659: # Delete the libtool libraries and symlinks.
! 7660: for n in $library_names; do
! 7661: rmfiles="$rmfiles $objdir/$n"
! 7662: done
! 7663: test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
! 7664:
! 7665: case "$mode" in
! 7666: clean)
! 7667: case " $library_names " in
! 7668: # " " in the beginning catches empty $dlname
! 7669: *" $dlname "*) ;;
! 7670: *) rmfiles="$rmfiles $objdir/$dlname" ;;
! 7671: esac
! 7672: test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
! 7673: ;;
! 7674: uninstall)
! 7675: if test -n "$library_names"; then
! 7676: # Do each command in the postuninstall commands.
! 7677: func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
! 7678: fi
! 7679:
! 7680: if test -n "$old_library"; then
! 7681: # Do each command in the old_postuninstall commands.
! 7682: func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
! 7683: fi
! 7684: # FIXME: should reinstall the best remaining shared library.
! 7685: ;;
! 7686: esac
! 7687: fi
! 7688: ;;
! 7689:
! 7690: *.lo)
! 7691: # Possibly a libtool object, so verify it.
! 7692: if func_lalib_p "$file"; then
! 7693:
! 7694: # Read the .lo file
! 7695: func_source $dir/$name
! 7696:
! 7697: # Add PIC object to the list of files to remove.
! 7698: if test -n "$pic_object" &&
! 7699: test "$pic_object" != none; then
! 7700: rmfiles="$rmfiles $dir/$pic_object"
! 7701: fi
! 7702:
! 7703: # Add non-PIC object to the list of files to remove.
! 7704: if test -n "$non_pic_object" &&
! 7705: test "$non_pic_object" != none; then
! 7706: rmfiles="$rmfiles $dir/$non_pic_object"
! 7707: fi
! 7708: fi
! 7709: ;;
! 7710:
! 7711: *)
! 7712: if test "$mode" = clean ; then
! 7713: noexename=$name
! 7714: case $file in
! 7715: *.exe)
! 7716: func_stripname '' '.exe' "$file"
! 7717: file=$func_stripname_result
! 7718: func_stripname '' '.exe' "$name"
! 7719: noexename=$func_stripname_result
! 7720: # $file with .exe has already been added to rmfiles,
! 7721: # add $file without .exe
! 7722: rmfiles="$rmfiles $file"
! 7723: ;;
! 7724: esac
! 7725: # Do a test to see if this is a libtool program.
! 7726: if func_ltwrapper_p "$file"; then
! 7727: if func_ltwrapper_executable_p "$file"; then
! 7728: func_ltwrapper_scriptname "$file"
! 7729: relink_command=
! 7730: func_source $func_ltwrapper_scriptname_result
! 7731: rmfiles="$rmfiles $func_ltwrapper_scriptname_result"
! 7732: else
! 7733: relink_command=
! 7734: func_source $dir/$noexename
! 7735: fi
! 7736:
! 7737: # note $name still contains .exe if it was in $file originally
! 7738: # as does the version of $file that was added into $rmfiles
! 7739: rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
! 7740: if test "$fast_install" = yes && test -n "$relink_command"; then
! 7741: rmfiles="$rmfiles $objdir/lt-$name"
! 7742: fi
! 7743: if test "X$noexename" != "X$name" ; then
! 7744: rmfiles="$rmfiles $objdir/lt-${noexename}.c"
! 7745: fi
! 7746: fi
! 7747: fi
! 7748: ;;
! 7749: esac
! 7750: func_show_eval "$RM $rmfiles" 'exit_status=1'
! 7751: done
! 7752: objdir="$origobjdir"
! 7753:
! 7754: # Try to remove the ${objdir}s in the directories where we deleted files
! 7755: for dir in $rmdirs; do
! 7756: if test -d "$dir"; then
! 7757: func_show_eval "rmdir $dir >/dev/null 2>&1"
! 7758: fi
! 7759: done
! 7760:
! 7761: exit $exit_status
! 7762: }
! 7763:
! 7764: { test "$mode" = uninstall || test "$mode" = clean; } &&
! 7765: func_mode_uninstall ${1+"$@"}
! 7766:
! 7767: test -z "$mode" && {
! 7768: help="$generic_help"
! 7769: func_fatal_help "you must specify a MODE"
! 7770: }
! 7771:
! 7772: test -z "$exec_cmd" && \
! 7773: func_fatal_help "invalid operation mode \`$mode'"
! 7774:
! 7775: if test -n "$exec_cmd"; then
! 7776: eval exec "$exec_cmd"
! 7777: exit $EXIT_FAILURE
! 7778: fi
! 7779:
! 7780: exit $exit_status
! 7781:
! 7782:
! 7783: # The TAGs below are defined such that we never get into a situation
! 7784: # in which we disable both kinds of libraries. Given conflicting
! 7785: # choices, we go for a static library, that is the most portable,
! 7786: # since we can't tell whether shared libraries were disabled because
! 7787: # the user asked for that or because the platform doesn't support
! 7788: # them. This is particularly important on AIX, because we don't
! 7789: # support having both static and shared libraries enabled at the same
! 7790: # time on that platform, so we default to a shared-only configuration.
! 7791: # If a disable-shared tag is given, we'll fallback to a static-only
! 7792: # configuration. But we'll never go from static-only to shared-only.
! 7793:
! 7794: # ### BEGIN LIBTOOL TAG CONFIG: disable-shared
! 7795: build_libtool_libs=no
! 7796: build_old_libs=yes
! 7797: # ### END LIBTOOL TAG CONFIG: disable-shared
! 7798:
! 7799: # ### BEGIN LIBTOOL TAG CONFIG: disable-static
! 7800: build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
! 7801: # ### END LIBTOOL TAG CONFIG: disable-static
! 7802:
! 7803: # Local Variables:
! 7804: # mode:shell-script
! 7805: # sh-indentation:2
! 7806: # End:
! 7807: # vi:sw=2
! 7808:
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>