Annotation of gforth/gforth.el, revision 1.25
1.17 anton 1: ;; Forth mode for Emacs
2: ;; This file is part of GForth.
1.1 anton 3: ;; Changes by anton
1.6 anton 4: ;; This is a variant of forth.el that came with TILE.
1.5 anton 5: ;; I left most of this stuff untouched and made just a few changes for
1.6 anton 6: ;; the things I use (mainly indentation and syntax tables).
7: ;; So there is still a lot of work to do to adapt this to gforth.
1.1 anton 8:
1.17 anton 9: ;; GForth is distributed in the hope that it will be useful,
1.1 anton 10: ;; but WITHOUT ANY WARRANTY. No author or distributor
11: ;; accepts responsibility to anyone for the consequences of using it
12: ;; or for whether it serves any particular purpose or works at all,
13: ;; unless he says so in writing. Refer to the GNU Emacs General Public
14: ;; License for full details.
15:
16: ;; Everyone is granted permission to copy, modify and redistribute
17: ;; GNU Emacs, but only under the conditions described in the
18: ;; GNU Emacs General Public License. A copy of this license is
1.17 anton 19: ;; supposed to have been given to you along with Gforth so you
1.1 anton 20: ;; can know your rights and responsibilities. It should be in a
21: ;; file named COPYING. Among other things, the copyright notice
22: ;; and this notice must be preserved on all copies.
23:
24: ;;-------------------------------------------------------------------
25: ;; A Forth indentation, documentation search and interaction library
26: ;;-------------------------------------------------------------------
27: ;;
28: ;; Written by Goran Rydqvist, gorry@ida.liu.se, Summer 1988
29: ;; Started: 16 July 88
30: ;; Version: 2.10
31: ;; Last update: 5 December 1989 by Mikael Patel, mip@ida.liu.se
32: ;; Last update: 25 June 1990 by Goran Rydqvist, gorry@ida.liu.se
33: ;;
34: ;; Documentation: See forth-mode (^HF forth-mode)
35: ;;-------------------------------------------------------------------
36:
37:
38: (defvar forth-positives
1.23 anton 39: " : :noname code interpretation: ;code does> begin do ?do +do -do u+do u-do while if ?dup-if ?dup-0=-if else case of struct [if] [ifdef] [ifundef] [else] with public: private: class "
1.1 anton 40: "Contains all words which will cause the indent-level to be incremented
41: on the next line.
42: OBS! All words in forth-positives must be surrounded by spaces.")
43:
44: (defvar forth-negatives
1.21 pazsan 45: " ; end-code ;code does> until repeat while +loop loop -loop s+loop else then endif again endcase endof end-struct [then] [else] [endif] endwith class; how: "
1.1 anton 46: "Contains all words which will cause the indent-level to be decremented
47: on the current line.
48: OBS! All words in forth-negatives must be surrounded by spaces.")
49:
50: (defvar forth-zeroes
1.21 pazsan 51: " : :noname code interpretation: public: private: how: class class; "
1.1 anton 52: "Contains all words which causes the indent to go to zero")
53:
1.21 pazsan 54: (setq forth-zero 0)
55:
56: (defvar forth-zup
1.25 ! pazsan 57: " how: implements "
1.21 pazsan 58: "Contains all words which causes zero indent level to change")
59:
60: (defvar forth-zdown
61: " class; how: class public: private: "
62: "Contains all words which causes zero indent level to change")
63:
1.6 anton 64: (defvar forth-prefixes
65: " postpone [compile] ['] [char] "
66: "words that prefix and escape other words")
67:
1.1 anton 68: (defvar forth-mode-abbrev-table nil
69: "Abbrev table in use in Forth-mode buffers.")
70:
71: (define-abbrev-table 'forth-mode-abbrev-table ())
72:
73: (defvar forth-mode-map nil
74: "Keymap used in Forth mode.")
75:
76: (if (not forth-mode-map)
77: (setq forth-mode-map (make-sparse-keymap)))
78:
1.9 anton 79: ;(define-key forth-mode-map "\M-\C-x" 'compile)
1.7 anton 80: (define-key forth-mode-map "\C-x\\" 'comment-region)
81: (define-key forth-mode-map "\C-x~" 'forth-remove-tracers)
1.1 anton 82: (define-key forth-mode-map "\e\C-m" 'forth-send-paragraph)
83: (define-key forth-mode-map "\eo" 'forth-send-buffer)
84: (define-key forth-mode-map "\C-x\C-m" 'forth-split)
85: (define-key forth-mode-map "\e " 'forth-reload)
86: (define-key forth-mode-map "\t" 'forth-indent-command)
87: (define-key forth-mode-map "\C-m" 'reindent-then-newline-and-indent)
1.7 anton 88: (define-key forth-mode-map "\M-q" 'forth-fill-paragraph)
1.13 pazsan 89: (define-key forth-mode-map "\e." 'forth-find-tag)
1.1 anton 90:
1.22 anton 91: (load "etags")
1.13 pazsan 92:
93: (defun forth-find-tag (tagname &optional next-p regexp-p)
94: (interactive (find-tag-interactive "Find tag: "))
95: (switch-to-buffer
96: (find-tag-noselect (concat " " tagname " ") next-p regexp-p)))
97:
1.1 anton 98: (defvar forth-mode-syntax-table nil
99: "Syntax table in use in Forth-mode buffers.")
100:
101: (if (not forth-mode-syntax-table)
102: (progn
103: (setq forth-mode-syntax-table (make-syntax-table))
1.6 anton 104: (let ((char 0))
105: (while (< char ?!)
106: (modify-syntax-entry char " " forth-mode-syntax-table)
107: (setq char (1+ char)))
108: (while (< char 256)
109: (modify-syntax-entry char "w" forth-mode-syntax-table)
110: (setq char (1+ char))))
111: (modify-syntax-entry ?\" "\"" forth-mode-syntax-table)
112: (modify-syntax-entry ?\\ "<" forth-mode-syntax-table)
113: (modify-syntax-entry ?\n ">" forth-mode-syntax-table)
114: ))
115: ;I do not define '(' and ')' as comment delimiters, because emacs
116: ;only supports one comment syntax (and a hack to accomodate C++); I
117: ;use '\' for natural language comments and '(' for formal comments
118: ;like stack comments, so for me it's better to have emacs treat '\'
1.13 pazsan 119: ;comments as comments. If you want it different, make the appropriate
1.6 anton 120: ;changes (best in your .emacs file).
121: ;
122: ;Hmm, the C++ hack could be used to support both comment syntaxes: we
123: ;can have different comment styles, if both comments start with the
124: ;same character. we could use ' ' as first and '(' and '\' as second
125: ;character. However this would fail for G\ comments.
1.1 anton 126:
127: (defconst forth-indent-level 4
128: "Indentation of Forth statements.")
129:
130: (defun forth-mode-variables ()
131: (set-syntax-table forth-mode-syntax-table)
132: (setq local-abbrev-table forth-mode-abbrev-table)
133: (make-local-variable 'paragraph-start)
134: (setq paragraph-start (concat "^$\\|" page-delimiter))
135: (make-local-variable 'paragraph-separate)
136: (setq paragraph-separate paragraph-start)
137: (make-local-variable 'indent-line-function)
138: (setq indent-line-function 'forth-indent-line)
1.6 anton 139: ; (make-local-variable 'require-final-newline)
140: ; (setq require-final-newline t)
1.1 anton 141: (make-local-variable 'comment-start)
1.3 anton 142: (setq comment-start "\\ ")
143: ;(make-local-variable 'comment-end)
144: ;(setq comment-end " )")
1.1 anton 145: (make-local-variable 'comment-column)
146: (setq comment-column 40)
147: (make-local-variable 'comment-start-skip)
1.3 anton 148: (setq comment-start-skip "\\ ")
1.1 anton 149: (make-local-variable 'comment-indent-hook)
150: (setq comment-indent-hook 'forth-comment-indent)
151: (make-local-variable 'parse-sexp-ignore-comments)
152: (setq parse-sexp-ignore-comments t))
153:
1.2 anton 154: ;;;###autoload
1.1 anton 155: (defun forth-mode ()
156: "
157: Major mode for editing Forth code. Tab indents for Forth code. Comments
1.9 anton 158: are delimited with \\ and newline. Paragraphs are separated by blank lines
1.23 anton 159: only.
1.1 anton 160: \\{forth-mode-map}
161: Forth-split
162: Positions the current buffer on top and a forth-interaction window
163: below. The window size is controlled by the forth-percent-height
164: variable (see below).
165: Forth-reload
166: Reloads the forth library and restarts the forth process.
167: Forth-send-buffer
168: Sends the current buffer, in text representation, as input to the
169: forth process.
170: Forth-send-paragraph
171: Sends the previous or the current paragraph to the forth-process.
172: Note that the cursor only need to be with in the paragraph to be sent.
173: forth-documentation
174: Search for documentation of forward adjacent to cursor. Note! To use
175: this mode you have to add a line, to your .emacs file, defining the
176: directories to search through for documentation files (se variable
177: forth-help-load-path below) e.g. (setq forth-help-load-path '(nil)).
178:
179: Variables controlling interaction and startup
180: forth-percent-height
181: Tells split how high to make the edit portion, in percent of the
182: current screen height.
183: forth-program-name
184: Tells the library which program name to execute in the interation
185: window.
186:
187: Variables controlling indentation style:
188: forth-positives
189: A string containing all words which causes the indent-level of the
190: following line to be incremented.
191: OBS! Each word must be surronded by spaces.
192: forth-negatives
193: A string containing all words which causes the indentation of the
194: current line to be decremented, if the word begin the line. These
195: words also has a cancelling effect on the indent-level of the
196: following line, independent of position.
197: OBS! Each word must be surronded by spaces.
198: forth-zeroes
199: A string containing all words which causes the indentation of the
200: current line to go to zero, if the word begin the line.
201: OBS! Each word must be surronded by spaces.
202: forth-indent-level
203: Indentation increment/decrement of Forth statements.
204:
205: Note! A word which decrements the indentation of the current line, may
206: also be mentioned in forth-positives to cause the indentation to
207: resume the previous level.
208:
209: Variables controling documentation search
210: forth-help-load-path
211: List of directories to search through to find *.doc
212: (forth-help-file-suffix) files. Nil means current default directory.
213: The specified directories must contain at least one .doc file. If it
214: does not and you still want the load-path to scan that directory, create
215: an empty file dummy.doc.
216: forth-help-file-suffix
217: The file names to search for in each directory specified by
218: forth-help-load-path. Defaulted to '*.doc'.
219: "
220: (interactive)
221: (kill-all-local-variables)
222: (use-local-map forth-mode-map)
223: (setq mode-name "Forth")
224: (setq major-mode 'forth-mode)
225: (forth-mode-variables)
226: ; (if (not (forth-process-running-p))
227: ; (run-forth forth-program-name))
228: (run-hooks 'forth-mode-hook))
229:
1.6 anton 230: (setq forth-mode-hook
1.9 anton 231: '(lambda ()
232: (make-local-variable 'compile-command)
233: (setq compile-command "gforth ")))
1.6 anton 234:
1.7 anton 235: (defun forth-fill-paragraph ()
236: "Fill comments (starting with '\'; do not fill code (block style
237: programmers who tend to fill code won't use emacs anyway:-)."
1.9 anton 238: ; Currently only comments at the start of the line are filled.
239: ; Something like lisp-fill-paragraph may be better. We cannot use
240: ; fill-paragraph, because it removes the \ from the first comment
241: ; line. Therefore we have to look for the first line of the comment
242: ; and use fill-region.
1.7 anton 243: (interactive)
244: (save-excursion
245: (beginning-of-line)
1.9 anton 246: (while (and
247: (= (forward-line -1) 0)
1.14 anton 248: (looking-at "[ \t]*\\\\g?[ \t]+")))
249: (if (not (looking-at "[ \t]*\\\\g?[ \t]+"))
1.9 anton 250: (forward-line 1))
251: (let ((from (point))
252: (to (save-excursion (forward-paragraph) (point))))
1.14 anton 253: (if (looking-at "[ \t]*\\\\g?[ \t]+")
1.9 anton 254: (progn (goto-char (match-end 0))
255: (set-fill-prefix)
256: (fill-region from to nil))))))
1.7 anton 257:
1.1 anton 258: (defun forth-comment-indent ()
259: (save-excursion
260: (beginning-of-line)
261: (if (looking-at ":[ \t]*")
262: (progn
263: (end-of-line)
264: (skip-chars-backward " \t\n")
265: (1+ (current-column)))
266: comment-column)))
267:
268: (defun forth-current-indentation ()
269: (save-excursion
270: (beginning-of-line)
271: (back-to-indentation)
272: (current-column)))
273:
274: (defun forth-delete-indentation ()
275: (let ((b nil) (m nil))
276: (save-excursion
277: (beginning-of-line)
278: (setq b (point))
279: (back-to-indentation)
280: (setq m (point)))
281: (delete-region b m)))
282:
283: (defun forth-indent-line (&optional flag)
284: "Correct indentation of the current Forth line."
285: (let ((x (forth-calculate-indent)))
286: (forth-indent-to x)))
287:
288: (defun forth-indent-command ()
289: (interactive)
290: (forth-indent-line t))
291:
292: (defun forth-indent-to (x)
293: (let ((p nil))
294: (setq p (- (current-column) (forth-current-indentation)))
295: (forth-delete-indentation)
296: (beginning-of-line)
297: (indent-to x)
298: (if (> p 0) (forward-char p))))
299:
300: ;;Calculate indent
301: (defun forth-calculate-indent ()
302: (let ((w1 nil) (indent 0) (centre 0))
303: (save-excursion
304: (beginning-of-line)
305: (skip-chars-backward " \t\n")
306: (beginning-of-line)
307: (back-to-indentation)
308: (setq indent (current-column))
309: (setq centre indent)
310: (setq indent (+ indent (forth-sum-line-indentation))))
311: (save-excursion
312: (beginning-of-line)
313: (back-to-indentation)
314: (let ((p (point)))
315: (skip-chars-forward "^ \t\n")
316: (setq w1 (buffer-substring p (point)))))
317: (if (> (- indent centre) forth-indent-level)
318: (setq indent (+ centre forth-indent-level)))
319: (if (> (- centre indent) forth-indent-level)
320: (setq indent (- centre forth-indent-level)))
321: (if (< indent 0) (setq indent 0))
322: (setq indent (- indent
323: (if (string-match
324: (regexp-quote (concat " " w1 " "))
325: forth-negatives)
326: forth-indent-level 0)))
1.21 pazsan 327: (if (string-match (regexp-quote (concat " " w1 " ")) forth-zdown)
328: (setq forth-zero 0))
1.1 anton 329: (if (string-match (regexp-quote (concat " " w1 " ")) forth-zeroes)
1.21 pazsan 330: (setq indent forth-zero))
331: (if (string-match (regexp-quote (concat " " w1 " ")) forth-zup)
332: (setq forth-zero 4))
1.1 anton 333: indent))
334:
335: (defun forth-sum-line-indentation ()
336: "Add upp the positive and negative weights of all words on the current line."
337: (let ((b (point)) (e nil) (sum 0) (w nil) (t1 nil) (t2 nil) (first t))
338: (end-of-line) (setq e (point))
339: (goto-char b)
340: (while (< (point) e)
341: (setq w (forth-next-word))
342: (setq t1 (string-match (regexp-quote (concat " " w " "))
343: forth-positives))
344: (setq t2 (string-match (regexp-quote (concat " " w " "))
345: forth-negatives))
346: (if t1
347: (setq sum (+ sum forth-indent-level)))
348: (if (and t2 (not first))
349: (setq sum (- sum forth-indent-level)))
350: (skip-chars-forward " \t")
351: (setq first nil))
352: sum))
353:
354:
355: (defun forth-next-word ()
1.6 anton 356: "Return the next forth-word. Skip anything that the forth-word takes from
357: the input stream (comments, arguments, etc.)"
358: ;actually, it would be better to use commands based on the
359: ;syntax-table or comment-start etc.
1.1 anton 360: (let ((w1 nil))
361: (while (not w1)
362: (skip-chars-forward " \t\n")
363: (let ((p (point)))
364: (skip-chars-forward "^ \t\n")
365: (setq w1 (buffer-substring p (point))))
366: (cond ((string-match "\"" w1)
367: (progn
1.6 anton 368: (skip-chars-forward "^\"\n")
369: (forward-char)))
370: ((string-match "\\\\" w1)
371: (progn
372: (end-of-line)
373: ))
374: ((or (equal "(" w1) (equal ".(" w1))
1.1 anton 375: (progn
1.6 anton 376: (skip-chars-forward "^)\n")
377: (forward-char)))
378: ((string-match (regexp-quote (concat " " w1 " ")) forth-prefixes)
379: (progn (skip-chars-forward " \t\n")
380: (skip-chars-forward "^ \t\n")))
1.1 anton 381: (t nil)))
382: w1))
383:
384:
385: ;; Forth commands
386:
1.7 anton 387: (defun forth-remove-tracers ()
388: "Remove tracers of the form `~~ '. Queries the user for each occurrence."
389: (interactive)
1.16 anton 390: (query-replace-regexp "\\(~~ \\| ~~$\\)" "" nil))
1.7 anton 391:
1.5 anton 392: (defvar forth-program-name "gforth"
1.1 anton 393: "*Program invoked by the `run-forth' command.")
394:
395: (defvar forth-band-name nil
396: "*Band loaded by the `run-forth' command.")
397:
398: (defvar forth-program-arguments nil
399: "*Arguments passed to the Forth program by the `run-forth' command.")
400:
401: (defun run-forth (command-line)
402: "Run an inferior Forth process. Output goes to the buffer `*forth*'.
403: With argument, asks for a command line. Split up screen and run forth
404: in the lower portion. The current-buffer when called will stay in the
405: upper portion of the screen, and all other windows are deleted.
406: Call run-forth again to make the *forth* buffer appear in the lower
407: part of the screen."
408: (interactive
409: (list (let ((default
410: (or forth-process-command-line
411: (forth-default-command-line))))
412: (if current-prefix-arg
413: (read-string "Run Forth: " default)
414: default))))
415: (setq forth-process-command-line command-line)
416: (forth-start-process command-line)
417: (forth-split)
418: (forth-set-runlight forth-runlight:input))
419:
420: (defun reset-forth ()
421: "Reset the Forth process."
422: (interactive)
423: (let ((process (get-process forth-program-name)))
424: (cond ((or (not process)
425: (not (eq (process-status process) 'run))
426: (yes-or-no-p
427: "The Forth process is running, are you SURE you want to reset it? "))
428: (message "Resetting Forth process...")
429: (forth-reload)
430: (message "Resetting Forth process...done")))))
431:
432: (defun forth-default-command-line ()
1.13 pazsan 433: (concat forth-program-name
1.1 anton 434: (if forth-program-arguments
435: (concat " " forth-program-arguments)
436: "")))
437:
438: ;;;; Internal Variables
439:
440: (defvar forth-process-command-line nil
441: "Command used to start the most recent Forth process.")
442:
443: (defvar forth-previous-send ""
444: "Most recent expression transmitted to the Forth process.")
445:
446: (defvar forth-process-filter-queue '()
447: "Queue used to synchronize filter actions properly.")
448:
449: (defvar forth-prompt "ok"
450: "The current forth prompt string.")
451:
452: (defvar forth-start-hook nil
453: "If non-nil, a procedure to call when the Forth process is started.
454: When called, the current buffer will be the Forth process-buffer.")
455:
456: (defvar forth-signal-death-message nil
457: "If non-nil, causes a message to be generated when the Forth process dies.")
458:
1.9 anton 459: (defvar forth-percent-height 50
1.1 anton 460: "Tells run-forth how high the upper window should be in percent.")
461:
462: (defconst forth-runlight:input ?I
463: "The character displayed when the Forth process is waiting for input.")
464:
465: (defvar forth-mode-string ""
466: "String displayed in the mode line when the Forth process is running.")
467:
468: ;;;; Evaluation Commands
469:
470: (defun forth-send-string (&rest strings)
471: "Send the string arguments to the Forth process.
472: The strings are concatenated and terminated by a newline."
473: (cond ((forth-process-running-p)
474: (forth-send-string-1 strings))
475: ((yes-or-no-p "The Forth process has died. Reset it? ")
476: (reset-forth)
477: (goto-char (point-max))
478: (forth-send-string-1 strings))))
479:
480: (defun forth-send-string-1 (strings)
481: (let ((string (apply 'concat strings)))
482: (forth-send-string-2 string)))
483:
484: (defun forth-send-string-2 (string)
485: (let ((process (get-process forth-program-name)))
486: (if (not (eq (current-buffer) (get-buffer forth-program-name)))
487: (progn
488: (forth-process-filter-output string)
489: (forth-process-filter:finish)))
490: (send-string process (concat string "\n"))
491: (if (eq (current-buffer) (process-buffer process))
492: (set-marker (process-mark process) (point)))))
493:
494:
495: (defun forth-send-region (start end)
496: "Send the current region to the Forth process.
497: The region is sent terminated by a newline."
498: (interactive "r")
499: (let ((process (get-process forth-program-name)))
500: (if (and process (eq (current-buffer) (process-buffer process)))
501: (progn (goto-char end)
502: (set-marker (process-mark process) end))))
503: (forth-send-string "\n" (buffer-substring start end) "\n"))
504:
505: (defun forth-end-of-paragraph ()
506: (if (looking-at "[\t\n ]+") (skip-chars-backward "\t\n "))
507: (if (not (re-search-forward "\n[ \t]*\n" nil t))
508: (goto-char (point-max))))
509:
510: (defun forth-send-paragraph ()
511: "Send the current or the previous paragraph to the Forth process"
512: (interactive)
513: (let (end)
514: (save-excursion
515: (forth-end-of-paragraph)
516: (skip-chars-backward "\t\n ")
517: (setq end (point))
518: (if (re-search-backward "\n[ \t]*\n" nil t)
519: (setq start (point))
520: (goto-char (point-min)))
521: (skip-chars-forward "\t\n ")
522: (forth-send-region (point) end))))
523:
524: (defun forth-send-buffer ()
525: "Send the current buffer to the Forth process."
526: (interactive)
527: (if (eq (current-buffer) (forth-process-buffer))
528: (error "Not allowed to send this buffer's contents to Forth"))
529: (forth-send-region (point-min) (point-max)))
530:
531:
532: ;;;; Basic Process Control
533:
534: (defun forth-start-process (command-line)
535: (let ((buffer (get-buffer-create "*forth*")))
536: (let ((process (get-buffer-process buffer)))
537: (save-excursion
538: (set-buffer buffer)
539: (progn (if process (delete-process process))
540: (goto-char (point-max))
541: (setq mode-line-process '(": %s"))
542: (add-to-global-mode-string 'forth-mode-string)
543: (setq process
544: (apply 'start-process
545: (cons forth-program-name
546: (cons buffer
547: (forth-parse-command-line
548: command-line)))))
549: (set-marker (process-mark process) (point-max))
550: (forth-process-filter-initialize t)
551: (forth-modeline-initialize)
552: (set-process-sentinel process 'forth-process-sentinel)
553: (set-process-filter process 'forth-process-filter)
554: (run-hooks 'forth-start-hook)))
555: buffer)))
556:
557: (defun forth-parse-command-line (string)
558: (setq string (substitute-in-file-name string))
559: (let ((start 0)
560: (result '()))
561: (while start
562: (let ((index (string-match "[ \t]" string start)))
563: (setq start
564: (cond ((not index)
565: (setq result
566: (cons (substring string start)
567: result))
568: nil)
569: ((= index start)
570: (string-match "[^ \t]" string start))
571: (t
572: (setq result
573: (cons (substring string start index)
574: result))
575: (1+ index))))))
576: (nreverse result)))
577:
578:
579: (defun forth-process-running-p ()
580: "True iff there is a Forth process whose status is `run'."
581: (let ((process (get-process forth-program-name)))
582: (and process
583: (eq (process-status process) 'run))))
584:
585: (defun forth-process-buffer ()
586: (let ((process (get-process forth-program-name)))
587: (and process (process-buffer process))))
588:
589: ;;;; Process Filter
590:
591: (defun forth-process-sentinel (proc reason)
592: (let ((inhibit-quit nil))
593: (forth-process-filter-initialize (eq reason 'run))
594: (if (eq reason 'run)
595: (forth-modeline-initialize)
596: (setq forth-mode-string "")))
597: (if (and (not (memq reason '(run stop)))
598: forth-signal-death-message)
599: (progn (beep)
600: (message
601: "The Forth process has died! Do M-x reset-forth to restart it"))))
602:
603: (defun forth-process-filter-initialize (running-p)
604: (setq forth-process-filter-queue (cons '() '()))
605: (setq forth-prompt "ok"))
606:
607:
608: (defun forth-process-filter (proc string)
609: (forth-process-filter-output string)
610: (forth-process-filter:finish))
611:
612: (defun forth-process-filter:enqueue (action)
613: (let ((next (cons action '())))
614: (if (cdr forth-process-filter-queue)
615: (setcdr (cdr forth-process-filter-queue) next)
616: (setcar forth-process-filter-queue next))
617: (setcdr forth-process-filter-queue next)))
618:
619: (defun forth-process-filter:finish ()
620: (while (car forth-process-filter-queue)
621: (let ((next (car forth-process-filter-queue)))
622: (setcar forth-process-filter-queue (cdr next))
623: (if (not (cdr next))
624: (setcdr forth-process-filter-queue '()))
625: (apply (car (car next)) (cdr (car next))))))
626:
627: ;;;; Process Filter Output
628:
629: (defun forth-process-filter-output (&rest args)
630: (if (not (and args
631: (null (cdr args))
632: (stringp (car args))
633: (string-equal "" (car args))))
634: (forth-process-filter:enqueue
635: (cons 'forth-process-filter-output-1 args))))
636:
637: (defun forth-process-filter-output-1 (&rest args)
638: (save-excursion
639: (forth-goto-output-point)
640: (apply 'insert-before-markers args)))
641:
642: (defun forth-guarantee-newlines (n)
643: (save-excursion
644: (forth-goto-output-point)
645: (let ((stop nil))
646: (while (and (not stop)
647: (bolp))
648: (setq n (1- n))
649: (if (bobp)
650: (setq stop t)
651: (backward-char))))
652: (forth-goto-output-point)
653: (while (> n 0)
654: (insert-before-markers ?\n)
655: (setq n (1- n)))))
656:
657: (defun forth-goto-output-point ()
658: (let ((process (get-process forth-program-name)))
659: (set-buffer (process-buffer process))
660: (goto-char (process-mark process))))
661:
662: (defun forth-modeline-initialize ()
663: (setq forth-mode-string " "))
664:
665: (defun forth-set-runlight (runlight)
666: (aset forth-mode-string 0 runlight)
667: (forth-modeline-redisplay))
668:
669: (defun forth-modeline-redisplay ()
670: (save-excursion (set-buffer (other-buffer)))
671: (set-buffer-modified-p (buffer-modified-p))
672: (sit-for 0))
673:
674: ;;;; Process Filter Operations
675:
676: (defun add-to-global-mode-string (x)
677: (cond ((null global-mode-string)
678: (setq global-mode-string (list "" x " ")))
679: ((not (memq x global-mode-string))
680: (setq global-mode-string
681: (cons ""
682: (cons x
683: (cons " "
684: (if (equal "" (car global-mode-string))
685: (cdr global-mode-string)
686: global-mode-string))))))))
687:
688:
689: ;; Misc
690:
691: (setq auto-mode-alist (append auto-mode-alist
1.4 pazsan 692: '(("\\.fs$" . forth-mode))))
1.1 anton 693:
694: (defun forth-split ()
695: (interactive)
696: (forth-split-1 "*forth*"))
697:
698: (defun forth-split-1 (buffer)
699: (if (not (eq (window-buffer) (get-buffer buffer)))
700: (progn
701: (delete-other-windows)
702: (split-window-vertically
703: (/ (* (screen-height) forth-percent-height) 100))
704: (other-window 1)
705: (switch-to-buffer buffer)
706: (goto-char (point-max))
707: (other-window 1))))
708:
709: (defun forth-reload ()
710: (interactive)
711: (let ((process (get-process forth-program-name)))
712: (if process (kill-process process t)))
713: (sleep-for-millisecs 100)
714: (forth-mode))
715:
716:
717: ;; Special section for forth-help
718:
719: (defvar forth-help-buffer "*Forth-help*"
720: "Buffer used to display the requested documentation.")
721:
722: (defvar forth-help-load-path nil
723: "List of directories to search through to find *.doc
724: (forth-help-file-suffix) files. Nil means current default directory.
725: The specified directories must contain at least one .doc file. If it
726: does not and you still want the load-path to scan that directory, create
727: an empty file dummy.doc.")
728:
729: (defvar forth-help-file-suffix "*.doc"
730: "The file names to search for in each directory.")
731:
732: (setq forth-search-command-prefix "grep -n \"^ [^(]* ")
733: (defvar forth-search-command-suffix "/dev/null")
734: (defvar forth-grep-error-regexp ": No such file or directory")
735:
736: (defun forth-function-called-at-point ()
737: "Return the space delimited word a point."
738: (save-excursion
739: (save-restriction
740: (narrow-to-region (max (point-min) (- (point) 1000)) (point-max))
741: (skip-chars-backward "^ \t\n" (point-min))
742: (if (looking-at "[ \t\n]")
743: (forward-char 1))
744: (let (obj (p (point)))
745: (skip-chars-forward "^ \t\n")
746: (buffer-substring p (point))))))
747:
748: (defun forth-help-names-extend-comp (path-list result)
749: (cond ((null path-list) result)
750: ((null (car path-list))
751: (forth-help-names-extend-comp (cdr path-list)
752: (concat result forth-help-file-suffix " ")))
753: (t (forth-help-names-extend-comp
754: (cdr path-list) (concat result
755: (expand-file-name (car path-list)) "/"
756: forth-help-file-suffix " ")))))
757:
758: (defun forth-help-names-extended ()
759: (if forth-help-load-path
760: (forth-help-names-extend-comp forth-help-load-path "")
761: (error "forth-help-load-path not specified")))
762:
763:
1.7 anton 764: ;(define-key forth-mode-map "\C-hf" 'forth-documentation)
1.1 anton 765:
766: (defun forth-documentation (function)
767: "Display the full documentation of FORTH word."
768: (interactive
769: (let ((fn (forth-function-called-at-point))
770: (enable-recursive-minibuffers t)
771: search-list
772: val)
773: (setq val (read-string (format "Describe forth word (default %s): " fn)))
774: (list (if (equal val "") fn val))))
775: (forth-get-doc (concat forth-search-command-prefix
776: (grep-regexp-quote (concat function " ("))
777: "[^)]*\-\-\" " (forth-help-names-extended)
778: forth-search-command-suffix))
779: (message "C-x C-m switches back to the forth interaction window"))
780:
781: (defun forth-get-doc (command)
782: "Display the full documentation of command."
783: (let ((curwin (get-buffer-window (window-buffer)))
784: reswin
785: pointmax)
786: (with-output-to-temp-buffer forth-help-buffer
787: (progn
788: (call-process "sh" nil forth-help-buffer t "-c" command)
789: (setq reswin (get-buffer-window forth-help-buffer))))
790: (setq reswin (get-buffer-window forth-help-buffer))
791: (select-window reswin)
792: (save-excursion
793: (goto-char (setq pointmax (point-max)))
794: (insert "--------------------\n\n"))
795: (let (fd doc)
796: (while (setq fd (forth-get-file-data pointmax))
797: (setq doc (forth-get-doc-string fd))
798: (save-excursion
799: (goto-char (point-max))
800: (insert (substring (car fd) (string-match "[^/]*$" (car fd)))
801: ":\n\n" doc "\n")))
802: (if (not doc)
803: (progn (goto-char (point-max)) (insert "Not found"))))
804: (select-window curwin)))
805:
806: (defun forth-skip-error-lines ()
807: (let ((lines 0))
808: (save-excursion
809: (while (re-search-forward forth-grep-error-regexp nil t)
810: (beginning-of-line)
811: (forward-line 1)
812: (setq lines (1+ lines))))
813: (forward-line lines)))
814:
815: (defun forth-get-doc-string (fd)
816: "Find file (car fd) and extract documentation from line (nth 1 fd)."
817: (let (result)
818: (save-window-excursion
819: (find-file (car fd))
820: (goto-line (nth 1 fd))
821: (if (not (eq (nth 1 fd) (1+ (count-lines (point-min) (point)))))
822: (error "forth-get-doc-string: serious error"))
823: (if (not (re-search-backward "\n[\t ]*\n" nil t))
824: (goto-char (point-min))
825: (goto-char (match-end 0)))
826: (let ((p (point)))
827: (if (not (re-search-forward "\n[\t ]*\n" nil t))
828: (goto-char (point-max)))
829: (setq result (buffer-substring p (point))))
830: (bury-buffer (current-buffer)))
831: result))
832:
833: (defun forth-get-file-data (limit)
834: "Parse grep output and return '(filename line#) list. Return nil when
835: passing limit."
836: (forth-skip-error-lines)
837: (if (< (point) limit)
838: (let ((result (forth-get-file-data-cont limit)))
839: (forward-line 1)
840: (beginning-of-line)
841: result)))
842:
843: (defun forth-get-file-data-cont (limit)
844: (let (result)
845: (let ((p (point)))
846: (skip-chars-forward "^:")
847: (setq result (buffer-substring p (point))))
848: (if (< (point) limit)
849: (let ((p (1+ (point))))
850: (forward-char 1)
851: (skip-chars-forward "^:")
852: (list result (string-to-int (buffer-substring p (point))))))))
853:
854: (defun grep-regexp-quote (str)
855: (let ((i 0) (m 1) (res ""))
856: (while (/= m 0)
857: (setq m (string-to-char (substring str i)))
858: (if (/= m 0)
859: (progn
860: (setq i (1+ i))
861: (if (string-match (regexp-quote (char-to-string m))
862: ".*\\^$[]")
863: (setq res (concat res "\\")))
864: (setq res (concat res (char-to-string m))))))
865: res))
866:
867:
1.9 anton 868: (define-key forth-mode-map "\C-x\C-e" 'compile)
1.1 anton 869: (define-key forth-mode-map "\C-x\C-n" 'next-error)
870: (require 'compile "compile")
871:
1.6 anton 872: (defvar forth-compile-command "gforth ")
1.9 anton 873: ;(defvar forth-compilation-window-percent-height 30)
1.1 anton 874:
875: (defun forth-compile (command)
876: (interactive (list (setq forth-compile-command (read-string "Compile command: " forth-compile-command))))
877: (forth-split-1 "*compilation*")
878: (setq ctools-compile-command command)
879: (compile1 ctools-compile-command "No more errors"))
880:
881:
1.12 pazsan 882: ;;; Forth menu
883: ;;; Mikael Karlsson <qramika@eras70.ericsson.se>
884:
885: (cond ((string-match "XEmacs\\|Lucid" emacs-version)
886: (require 'func-menu)
887:
888: (defconst fume-function-name-regexp-forth
889: "^\\(:\\)[ \t]+\\([^ \t]*\\)"
890: "Expression to get word definitions in Forth.")
891:
892: (setq fume-function-name-regexp-alist
893: (append '((forth-mode . fume-function-name-regexp-forth)
894: ) fume-function-name-regexp-alist))
895:
896: ;; Find next forth word in the buffer
897: (defun fume-find-next-forth-function-name (buffer)
898: "Searches for the next forth word in BUFFER."
899: (set-buffer buffer)
900: (if (re-search-forward fume-function-name-regexp nil t)
901: (let ((beg (match-beginning 2))
902: (end (match-end 2)))
903: (cons (buffer-substring beg end) beg))))
904:
905: (setq fume-find-function-name-method-alist
906: (append '((forth-mode . fume-find-next-forth-function-name))))
907:
908: ))
909: ;;; End Forth menu
910:
911: ;;; File folding of forth-files
912: ;;; uses outline
913: ;;; Toggle activation with M-x fold-f (when editing a forth-file)
914: ;;; Use f9 to expand, f10 to hide, Or the menubar in xemacs
915: ;;;
916: ;;; Works most of the times but loses sync with the cursor occasionally
917: ;;; Could be improved by also folding on comments
918:
919: (require 'outline)
920:
921: ;;(define-key outline-minor-mode-map 'f9 'show-entry)
922: ;;(define-key outline-minor-mode-map 'f10 'hide-entry)
923:
924: (defun fold-f ()
925: (interactive)
926: (add-hook 'outline-minor-mode-hook 'hide-body)
927:
928: ; outline mode header start, i.e. find word definitions
929: (setq outline-regexp "^\\(:\\)[ \t]+\\([^ \t]*\\)")
930:
931: (outline-minor-mode)
932: )
933: ;;; end file folding
934:
935: ;;; func-menu is a package that scans your source file for function definitions
936: ;;; and makes a menubar entry that lets you jump to any particular function
937: ;;; definition by selecting it from the menu. The following code turns this on
938: ;;; for all of the recognized languages. Scanning the buffer takes some time,
939: ;;; but not much.
940: ;;;
941: (cond ((string-match "XEmacs\\|Lucid" emacs-version)
942: (require 'func-menu)
943: ;; (define-key global-map 'f8 'function-menu)
944: (add-hook 'find-fible-hooks 'fume-add-menubar-entry)
945: (define-key global-map "\C-cg" 'fume-prompt-function-goto)
946: (define-key global-map '(shift button3) 'mouse-function-menu)
947: ))
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>