Annotation of gforth/doc/vmgen.texi, revision 1.12
1.10 anton 1: \input texinfo @c -*-texinfo-*-
2: @comment %**start of header
3: @setfilename vmgen.info
1.1 anton 4: @include version.texi
1.10 anton 5: @settitle Vmgen (Gforth @value{VERSION})
6: @c @syncodeindex pg cp
7: @comment %**end of header
8: @copying
9: This manual is for Vmgen
10: (version @value{VERSION}, @value{UPDATED}),
11: the virtual machine interpreter generator
12:
13: Copyright @copyright{} 2002 Free Software Foundation, Inc.
14:
15: @quotation
16: Permission is granted to copy, distribute and/or modify this document
17: under the terms of the GNU Free Documentation License, Version 1.1 or
18: any later version published by the Free Software Foundation; with no
19: Invariant Sections, with the Front-Cover texts being ``A GNU Manual,''
20: and with the Back-Cover Texts as in (a) below. A copy of the
21: license is included in the section entitled ``GNU Free Documentation
22: License.''
23:
24: (a) The FSF's Back-Cover Text is: ``You have freedom to copy and modify
25: this GNU Manual, like GNU software. Copies published by the Free
26: Software Foundation raise funds for GNU development.''
27: @end quotation
28: @end copying
29:
30: @dircategory GNU programming tools
31: @direntry
1.11 anton 32: * Vmgen: (vmgen). Interpreter generator
1.10 anton 33: @end direntry
34:
35: @titlepage
36: @title Vmgen
37: @subtitle for Gforth version @value{VERSION}, @value{UPDATED}
1.11 anton 38: @author M. Anton Ertl (@email{anton@@mips.complang.tuwien.ac.at})
1.10 anton 39: @page
40: @vskip 0pt plus 1filll
41: @insertcopying
42: @end titlepage
43:
44: @contents
45:
46: @ifnottex
47: @node Top, Introduction, (dir), (dir)
48: @top Vmgen
49:
50: @insertcopying
51: @end ifnottex
52:
53: @menu
54: * Introduction:: What can Vmgen do for you?
55: * Why interpreters?:: Advantages and disadvantages
56: * Concepts:: VM interpreter background
1.11 anton 57: * Invoking Vmgen::
1.10 anton 58: * Example::
59: * Input File Format::
60: * Using the generated code::
61: * Changes:: from earlier versions
62: * Contact:: Bug reporting etc.
63: * Copying This Manual:: Manual License
64: * Index::
65:
66: @detailmenu
67: --- The Detailed Node Listing ---
68:
69: Concepts
70:
71: * Front end and VM interpreter:: Modularizing an interpretive system
72: * Data handling:: Stacks, registers, immediate arguments
73: * Dispatch:: From one VM instruction to the next
74:
75: Example
76:
77: * Example overview::
78: * Using profiling to create superinstructions::
79:
80: Input File Format
81:
82: * Input File Grammar::
83: * Simple instructions::
84: * Superinstructions::
1.11 anton 85: * Register Machines:: How to define register VM instructions
1.10 anton 86:
87: Simple instructions
88:
89: * C Code Macros:: Macros recognized by Vmgen
90: * C Code restrictions:: Vmgen makes assumptions about C code
91:
92: Using the generated code
93:
94: * VM engine:: Executing VM code
95: * VM instruction table::
96: * VM code generation:: Creating VM code (in the front-end)
97: * Peephole optimization:: Creating VM superinstructions
98: * VM disassembler:: for debugging the front end
99: * VM profiler:: for finding worthwhile superinstructions
100:
101: Copying This Manual
102:
103: * GNU Free Documentation License:: License for copying this manual.
104:
105: @end detailmenu
106: @end menu
1.1 anton 107:
108: @c @ifnottex
1.11 anton 109: @c This file documents Vmgen (Gforth @value{VERSION}).
1.1 anton 110:
1.10 anton 111: @c ************************************************************
112: @node Introduction, Why interpreters?, Top, Top
1.2 anton 113: @chapter Introduction
1.1 anton 114:
115: Vmgen is a tool for writing efficient interpreters. It takes a simple
116: virtual machine description and generates efficient C code for dealing
117: with the virtual machine code in various ways (in particular, executing
118: it). The run-time efficiency of the resulting interpreters is usually
119: within a factor of 10 of machine code produced by an optimizing
120: compiler.
121:
1.11 anton 122: The interpreter design strategy supported by Vmgen is to divide the
1.1 anton 123: interpreter into two parts:
124:
125: @itemize @bullet
126:
127: @item The @emph{front end} takes the source code of the language to be
128: implemented, and translates it into virtual machine code. This is
129: similar to an ordinary compiler front end; typically an interpreter
130: front-end performs no optimization, so it is relatively simple to
131: implement and runs fast.
132:
133: @item The @emph{virtual machine interpreter} executes the virtual
134: machine code.
135:
136: @end itemize
137:
138: Such a division is usually used in interpreters, for modularity as well
1.6 anton 139: as for efficiency. The virtual machine code is typically passed between
140: front end and virtual machine interpreter in memory, like in a
1.1 anton 141: load-and-go compiler; this avoids the complexity and time cost of
142: writing the code to a file and reading it again.
143:
144: A @emph{virtual machine} (VM) represents the program as a sequence of
145: @emph{VM instructions}, following each other in memory, similar to real
146: machine code. Control flow occurs through VM branch instructions, like
147: in a real machine.
148:
1.12 ! anton 149: @cindex functionality features overview
1.11 anton 150: In this setup, Vmgen can generate most of the code dealing with virtual
1.1 anton 151: machine instructions from a simple description of the virtual machine
1.11 anton 152: instructions (@pxref{Input File Format}), in particular:
1.1 anton 153:
1.11 anton 154: @table @asis
1.1 anton 155:
156: @item VM instruction execution
157:
158: @item VM code generation
159: Useful in the front end.
160:
161: @item VM code decompiler
162: Useful for debugging the front end.
163:
164: @item VM code tracing
165: Useful for debugging the front end and the VM interpreter. You will
166: typically provide other means for debugging the user's programs at the
167: source level.
168:
169: @item VM code profiling
1.12 ! anton 170: Useful for optimizing the VM interpreter with superinstructions
1.11 anton 171: (@pxref{VM profiler}).
1.1 anton 172:
173: @end table
174:
1.12 ! anton 175: @cindex efficiency features overview
1.11 anton 176: @noindent
177: Vmgen supports efficient interpreters though various optimizations, in
1.1 anton 178: particular
179:
1.11 anton 180: @itemize @bullet
1.1 anton 181:
182: @item Threaded code
183:
184: @item Caching the top-of-stack in a register
185:
186: @item Combining VM instructions into superinstructions
187:
188: @item
189: Replicating VM (super)instructions for better BTB prediction accuracy
190: (not yet in vmgen-ex, but already in Gforth).
191:
192: @end itemize
193:
1.12 ! anton 194: @cindex speed for JVM
1.11 anton 195: As a result, Vmgen-based interpreters are only about an order of
196: magnitude slower than native code from an optimizing C compiler on small
1.1 anton 197: benchmarks; on large benchmarks, which spend more time in the run-time
1.2 anton 198: system, the slowdown is often less (e.g., the slowdown of a
199: Vmgen-generated JVM interpreter over the best JVM JIT compiler we
200: measured is only a factor of 2-3 for large benchmarks; some other JITs
201: and all other interpreters we looked at were slower than our
202: interpreter).
1.1 anton 203:
204: VMs are usually designed as stack machines (passing data between VM
1.11 anton 205: instructions on a stack), and Vmgen supports such designs especially
1.12 ! anton 206: well; however, you can also use Vmgen for implementing a register VM
! 207: (@pxref{Register Machines}) and still benefit from most of the advantages
! 208: offered by Vmgen.
1.1 anton 209:
1.2 anton 210: There are many potential uses of the instruction descriptions that are
211: not implemented at the moment, but we are open for feature requests, and
212: we will implement new features if someone asks for them; so the feature
213: list above is not exhaustive.
1.1 anton 214:
1.2 anton 215: @c *********************************************************************
1.10 anton 216: @node Why interpreters?, Concepts, Introduction, Top
1.2 anton 217: @chapter Why interpreters?
1.12 ! anton 218: @cindex interpreters, advantages
! 219: @cindex advantages of interpreters
! 220: @cindex advantages of vmgen
1.2 anton 221:
222: Interpreters are a popular language implementation technique because
223: they combine all three of the following advantages:
224:
1.11 anton 225: @itemize @bullet
1.2 anton 226:
227: @item Ease of implementation
228:
229: @item Portability
230:
231: @item Fast edit-compile-run cycle
232:
233: @end itemize
234:
1.12 ! anton 235: Vmgen makes it even easier to implement interpreters.
! 236:
! 237: @cindex speed of interpreters
1.2 anton 238: The main disadvantage of interpreters is their run-time speed. However,
239: there are huge differences between different interpreters in this area:
240: the slowdown over optimized C code on programs consisting of simple
241: operations is typically a factor of 10 for the more efficient
242: interpreters, and a factor of 1000 for the less efficient ones (the
243: slowdown for programs executing complex operations is less, because the
244: time spent in libraries for executing complex operations is the same in
245: all implementation strategies).
246:
1.12 ! anton 247: Vmgen supports techniques for building efficient interpreters.
1.2 anton 248:
249: @c ********************************************************************
1.11 anton 250: @node Concepts, Invoking Vmgen, Why interpreters?, Top
1.2 anton 251: @chapter Concepts
252:
1.10 anton 253: @menu
254: * Front end and VM interpreter:: Modularizing an interpretive system
255: * Data handling:: Stacks, registers, immediate arguments
256: * Dispatch:: From one VM instruction to the next
257: @end menu
258:
1.2 anton 259: @c --------------------------------------------------------------------
1.10 anton 260: @node Front end and VM interpreter, Data handling, Concepts, Concepts
261: @section Front end and VM interpreter
1.12 ! anton 262: @cindex modularization of interpreters
1.2 anton 263:
264: @cindex front-end
265: Interpretive systems are typically divided into a @emph{front end} that
266: parses the input language and produces an intermediate representation
267: for the program, and an interpreter that executes the intermediate
268: representation of the program.
269:
270: @cindex virtual machine
271: @cindex VM
1.12 ! anton 272: @cindex VM instruction
1.2 anton 273: @cindex instruction, VM
1.12 ! anton 274: @cindex VM branch instruction
! 275: @cindex branch instruction, VM
! 276: @cindex VM register
! 277: @cindex register, VM
! 278: @cindex opcode, VM instruction
! 279: @cindex immediate argument, VM instruction
1.2 anton 280: For efficient interpreters the intermediate representation of choice is
281: virtual machine code (rather than, e.g., an abstract syntax tree).
282: @emph{Virtual machine} (VM) code consists of VM instructions arranged
283: sequentially in memory; they are executed in sequence by the VM
1.12 ! anton 284: interpreter, but VM branch instructions can change the control flow and
! 285: are used for implementing control structures. The conceptual similarity
! 286: to real machine code results in the name @emph{virtual machine}.
! 287: Various terms similar to terms for real machines are used; e.g., there
! 288: are @emph{VM registers} (like the instruction pointer and stack
! 289: pointer(s)), and the VM instruction consists of an @emph{opcode} and
! 290: @emph{immediate arguments}.
1.2 anton 291:
1.11 anton 292: In this framework, Vmgen supports building the VM interpreter and any
1.2 anton 293: other component dealing with VM instructions. It does not have any
294: support for the front end, apart from VM code generation support. The
295: front end can be implemented with classical compiler front-end
1.3 anton 296: techniques, supported by tools like @command{flex} and @command{bison}.
1.2 anton 297:
298: The intermediate representation is usually just internal to the
299: interpreter, but some systems also support saving it to a file, either
300: as an image file, or in a full-blown linkable file format (e.g., JVM).
301: Vmgen currently has no special support for such features, but the
302: information in the instruction descriptions can be helpful, and we are
303: open for feature requests and suggestions.
1.3 anton 304:
1.10 anton 305: @c --------------------------------------------------------------------
306: @node Data handling, Dispatch, Front end and VM interpreter, Concepts
1.3 anton 307: @section Data handling
308:
309: @cindex stack machine
310: @cindex register machine
311: Most VMs use one or more stacks for passing temporary data between VM
312: instructions. Another option is to use a register machine architecture
313: for the virtual machine; however, this option is either slower or
314: significantly more complex to implement than a stack machine architecture.
315:
316: Vmgen has special support and optimizations for stack VMs, making their
317: implementation easy and efficient.
318:
1.11 anton 319: You can also implement a register VM with Vmgen (@pxref{Register
320: Machines}), and you will still profit from most Vmgen features.
1.3 anton 321:
322: @cindex stack item size
323: @cindex size, stack items
324: Stack items all have the same size, so they typically will be as wide as
325: an integer, pointer, or floating-point value. Vmgen supports treating
326: two consecutive stack items as a single value, but anything larger is
327: best kept in some other memory area (e.g., the heap), with pointers to
328: the data on the stack.
329:
330: @cindex instruction stream
331: @cindex immediate arguments
332: Another source of data is immediate arguments VM instructions (in the VM
333: instruction stream). The VM instruction stream is handled similar to a
1.11 anton 334: stack in Vmgen.
1.3 anton 335:
336: @cindex garbage collection
337: @cindex reference counting
1.12 ! anton 338: Vmgen has no built-in support for, nor restrictions against
! 339: @emph{garbage collection}. If you need garbage collection, you need to
! 340: provide it in your run-time libraries. Using @emph{reference counting}
! 341: is probably harder, but might be possible (contact us if you are
! 342: interested).
1.3 anton 343: @c reference counting might be possible by including counting code in
344: @c the conversion macros.
345:
1.10 anton 346: @c --------------------------------------------------------------------
347: @node Dispatch, , Data handling, Concepts
1.6 anton 348: @section Dispatch
1.12 ! anton 349: @cindex Dispatch of VM instructions
! 350: @cindex main interpreter loop
1.6 anton 351:
1.11 anton 352: Understanding this section is probably not necessary for using Vmgen,
1.6 anton 353: but it may help. You may want to skip it now, and read it if you find statements about dispatch methods confusing.
354:
355: After executing one VM instruction, the VM interpreter has to dispatch
1.11 anton 356: the next VM instruction (Vmgen calls the dispatch routine @samp{NEXT}).
1.6 anton 357: Vmgen supports two methods of dispatch:
358:
1.11 anton 359: @table @asis
1.6 anton 360:
361: @item switch dispatch
1.12 ! anton 362: @cindex switch dispatch
1.6 anton 363: In this method the VM interpreter contains a giant @code{switch}
364: statement, with one @code{case} for each VM instruction. The VM
1.12 ! anton 365: instruction opcodes are represented by integers (e.g., produced by an
! 366: @code{enum}) in the VM code, and dispatch occurs by loading the next
! 367: opcode, @code{switch}ing on it, and continuing at the appropriate
! 368: @code{case}; after executing the VM instruction, the VM interpreter
! 369: jumps back to the dispatch code.
1.6 anton 370:
371: @item threaded code
1.12 ! anton 372: @cindex threaded code
! 373: This method represents a VM instruction opcode by the address of the
! 374: start of the machine code fragment for executing the VM instruction.
1.6 anton 375: Dispatch consists of loading this address, jumping to it, and
376: incrementing the VM instruction pointer. Typically the threaded-code
377: dispatch code is appended directly to the code for executing the VM
378: instruction. Threaded code cannot be implemented in ANSI C, but it can
1.11 anton 379: be implemented using GNU C's labels-as-values extension (@pxref{Labels
380: as Values, , Labels as Values, gcc.info, GNU C Manual}).
1.6 anton 381:
382: @end table
383:
1.12 ! anton 384: Threaded code can be twice as fast as switch dispatch, depending on the
! 385: interpreter, the benchmark, and the machine.
! 386:
1.3 anton 387: @c *************************************************************
1.11 anton 388: @node Invoking Vmgen, Example, Concepts, Top
389: @chapter Invoking Vmgen
1.12 ! anton 390: @cindex Invoking Vmgen
1.3 anton 391:
1.11 anton 392: The usual way to invoke Vmgen is as follows:
1.3 anton 393:
394: @example
395: vmgen @var{infile}
396: @end example
397:
398: Here @var{infile} is the VM instruction description file, which usually
399: ends in @file{.vmg}. The output filenames are made by taking the
400: basename of @file{infile} (i.e., the output files will be created in the
401: current working directory) and replacing @file{.vmg} with @file{-vm.i},
402: @file{-disasm.i}, @file{-gen.i}, @file{-labels.i}, @file{-profile.i},
1.12 ! anton 403: and @file{-peephole.i}. E.g., @command{vmgen hack/foo.vmg} will create
1.3 anton 404: @file{foo-vm.i} etc.
405:
1.11 anton 406: The command-line options supported by Vmgen are
1.3 anton 407:
408: @table @option
409:
410: @cindex -h, command-line option
411: @cindex --help, command-line option
412: @item --help
413: @itemx -h
414: Print a message about the command-line options
415:
416: @cindex -v, command-line option
417: @cindex --version, command-line option
418: @item --version
419: @itemx -v
420: Print version and exit
421: @end table
422:
423: @c env vars GFORTHDIR GFORTHDATADIR
424:
1.5 anton 425: @c ****************************************************************
1.11 anton 426: @node Example, Input File Format, Invoking Vmgen, Top
1.5 anton 427: @chapter Example
1.12 ! anton 428: @cindex example of a Vmgen-based interpreter
1.5 anton 429:
1.10 anton 430: @menu
431: * Example overview::
432: * Using profiling to create superinstructions::
433: @end menu
434:
435: @c --------------------------------------------------------------------
436: @node Example overview, Using profiling to create superinstructions, Example, Example
1.5 anton 437: @section Example overview
1.12 ! anton 438: @cindex example overview
! 439: @cindex @file{vmgen-ex}
! 440: @cindex @file{vmgen-ex2}
1.5 anton 441:
1.11 anton 442: There are two versions of the same example for using Vmgen:
1.5 anton 443: @file{vmgen-ex} and @file{vmgen-ex2} (you can also see Gforth as
444: example, but it uses additional (undocumented) features, and also
445: differs in some other respects). The example implements @emph{mini}, a
446: tiny Modula-2-like language with a small JavaVM-like virtual machine.
1.12 ! anton 447:
1.5 anton 448: The difference between the examples is that @file{vmgen-ex} uses many
449: casts, and @file{vmgen-ex2} tries to avoids most casts and uses unions
1.12 ! anton 450: instead. In the rest of this manual we usually mention just files in
! 451: @file{vmgen-ex}; if you want to use unions, use the equivalent file in
! 452: @file{vmgen-ex2}.
! 453: @cindex unions example
! 454: @cindex casts example
1.5 anton 455:
456: The files provided with each example are:
1.12 ! anton 457: @cindex example files
1.5 anton 458:
459: @example
460: Makefile
461: README
462: disasm.c wrapper file
463: engine.c wrapper file
464: peephole.c wrapper file
465: profile.c wrapper file
466: mini-inst.vmg simple VM instructions
467: mini-super.vmg superinstructions (empty at first)
468: mini.h common declarations
469: mini.l scanner
470: mini.y front end (parser, VM code generator)
471: support.c main() and other support functions
472: fib.mini example mini program
473: simple.mini example mini program
474: test.mini example mini program (tests everything)
475: test.out test.mini output
476: stat.awk script for aggregating profile information
477: peephole-blacklist list of instructions not allowed in superinstructions
478: seq2rule.awk script for creating superinstructions
479: @end example
480:
481: For your own interpreter, you would typically copy the following files
482: and change little, if anything:
1.12 ! anton 483: @cindex wrapper files
1.5 anton 484:
485: @example
486: disasm.c wrapper file
487: engine.c wrapper file
488: peephole.c wrapper file
489: profile.c wrapper file
490: stat.awk script for aggregating profile information
491: seq2rule.awk script for creating superinstructions
492: @end example
493:
1.11 anton 494: @noindent
1.5 anton 495: You would typically change much in or replace the following files:
496:
497: @example
498: Makefile
499: mini-inst.vmg simple VM instructions
500: mini.h common declarations
501: mini.l scanner
502: mini.y front end (parser, VM code generator)
503: support.c main() and other support functions
504: peephole-blacklist list of instructions not allowed in superinstructions
505: @end example
506:
507: You can build the example by @code{cd}ing into the example's directory,
1.12 ! anton 508: and then typing @code{make}; you can check that it works with @code{make
1.5 anton 509: check}. You can run run mini programs like this:
510:
511: @example
512: ./mini fib.mini
513: @end example
514:
1.12 ! anton 515: To learn about the options, type @code{./mini -h}.
1.5 anton 516:
1.10 anton 517: @c --------------------------------------------------------------------
518: @node Using profiling to create superinstructions, , Example overview, Example
1.5 anton 519: @section Using profiling to create superinstructions
1.12 ! anton 520: @cindex profiling example
! 521: @cindex superinstructions example
1.5 anton 522:
523: I have not added rules for this in the @file{Makefile} (there are many
524: options for selecting superinstructions, and I did not want to hardcode
525: one into the @file{Makefile}), but there are some supporting scripts, and
526: here's an example:
527:
528: Suppose you want to use @file{fib.mini} and @file{test.mini} as training
529: programs, you get the profiles like this:
530:
531: @example
532: make fib.prof test.prof #takes a few seconds
533: @end example
534:
535: You can aggregate these profiles with @file{stat.awk}:
536:
537: @example
538: awk -f stat.awk fib.prof test.prof
539: @end example
540:
541: The result contains lines like:
542:
543: @example
544: 2 16 36910041 loadlocal lit
545: @end example
546:
547: This means that the sequence @code{loadlocal lit} statically occurs a
548: total of 16 times in 2 profiles, with a dynamic execution count of
549: 36910041.
550:
551: The numbers can be used in various ways to select superinstructions.
552: E.g., if you just want to select all sequences with a dynamic
553: execution count exceeding 10000, you would use the following pipeline:
554:
555: @example
556: awk -f stat.awk fib.prof test.prof|
557: awk '$3>=10000'| #select sequences
558: fgrep -v -f peephole-blacklist| #eliminate wrong instructions
1.12 ! anton 559: awk -f seq2rule.awk| #transform sequences into superinstruction rules
1.5 anton 560: sort -k 3 >mini-super.vmg #sort sequences
561: @end example
562:
563: The file @file{peephole-blacklist} contains all instructions that
564: directly access a stack or stack pointer (for mini: @code{call},
565: @code{return}); the sort step is necessary to ensure that prefixes
566: preceed larger superinstructions.
567:
568: Now you can create a version of mini with superinstructions by just
569: saying @samp{make}
570:
1.10 anton 571:
1.3 anton 572: @c ***************************************************************
1.10 anton 573: @node Input File Format, Using the generated code, Example, Top
1.3 anton 574: @chapter Input File Format
1.12 ! anton 575: @cindex input file format
! 576: @cindex format, input file
1.3 anton 577:
578: Vmgen takes as input a file containing specifications of virtual machine
579: instructions. This file usually has a name ending in @file{.vmg}.
580:
1.5 anton 581: Most examples are taken from the example in @file{vmgen-ex}.
1.3 anton 582:
1.10 anton 583: @menu
584: * Input File Grammar::
585: * Simple instructions::
586: * Superinstructions::
1.11 anton 587: * Register Machines:: How to define register VM instructions
1.10 anton 588: @end menu
589:
590: @c --------------------------------------------------------------------
591: @node Input File Grammar, Simple instructions, Input File Format, Input File Format
1.3 anton 592: @section Input File Grammar
1.12 ! anton 593: @cindex grammar, input file
! 594: @cindex input file grammar
1.3 anton 595:
596: The grammar is in EBNF format, with @code{@var{a}|@var{b}} meaning
597: ``@var{a} or @var{b}'', @code{@{@var{c}@}} meaning 0 or more repetitions
598: of @var{c} and @code{[@var{d}]} meaning 0 or 1 repetitions of @var{d}.
599:
1.12 ! anton 600: @cindex free-format, not
1.3 anton 601: Vmgen input is not free-format, so you have to take care where you put
602: spaces and especially newlines; it's not as bad as makefiles, though:
603: any sequence of spaces and tabs is equivalent to a single space.
604:
605: @example
1.11 anton 606: description: @{instruction|comment|eval-escape@}
1.3 anton 607:
608: instruction: simple-inst|superinst
609:
1.12 ! anton 610: simple-inst: ident ' (' stack-effect ' )' newline c-code newline newline
1.3 anton 611:
1.12 ! anton 612: stack-effect: @{ident@} ' --' @{ident@}
1.3 anton 613:
1.12 ! anton 614: super-inst: ident ' =' ident @{ident@}
1.3 anton 615:
1.12 ! anton 616: comment: '\ ' text newline
1.3 anton 617:
1.12 ! anton 618: eval-escape: '\e ' text newline
1.3 anton 619: @end example
620: @c \+ \- \g \f \c
621:
622: Note that the @code{\}s in this grammar are meant literally, not as
1.5 anton 623: C-style encodings for non-printable characters.
1.3 anton 624:
625: The C code in @code{simple-inst} must not contain empty lines (because
1.11 anton 626: Vmgen would mistake that as the end of the simple-inst. The text in
1.3 anton 627: @code{comment} and @code{eval-escape} must not contain a newline.
628: @code{Ident} must conform to the usual conventions of C identifiers
1.11 anton 629: (otherwise the C compiler would choke on the Vmgen output).
1.3 anton 630:
631: Vmgen understands a few extensions beyond the grammar given here, but
632: these extensions are only useful for building Gforth. You can find a
633: description of the format used for Gforth in @file{prim}.
634:
1.10 anton 635: @subsection Eval escapes
1.12 ! anton 636: @cindex escape to Forth
! 637: @cindex eval escape
! 638:
1.3 anton 639: @c woanders?
640: The text in @code{eval-escape} is Forth code that is evaluated when
1.11 anton 641: Vmgen reads the line. If you do not know (and do not want to learn)
1.3 anton 642: Forth, you can build the text according to the following grammar; these
1.11 anton 643: rules are normally all Forth you need for using Vmgen:
1.3 anton 644:
645: @example
646: text: stack-decl|type-prefix-decl|stack-prefix-decl
647:
1.12 ! anton 648: stack-decl: 'stack ' ident ident ident
1.3 anton 649: type-prefix-decl:
1.12 ! anton 650: 's" ' string '" ' ('single'|'double') ident 'type-prefix' ident
! 651: stack-prefix-decl: ident 'stack-prefix' string
1.3 anton 652: @end example
653:
654: Note that the syntax of this code is not checked thoroughly (there are
655: many other Forth program fragments that could be written there).
656:
657: If you know Forth, the stack effects of the non-standard words involved
658: are:
1.12 ! anton 659: @findex stack
! 660: @findex type-prefix
! 661: @findex single
! 662: @findex double
! 663: @findex stack-prefix
1.3 anton 664: @example
665: stack ( "name" "pointer" "type" -- )
666: ( name execution: -- stack )
667: type-prefix ( addr u xt1 xt2 n stack "prefix" -- )
668: single ( -- xt1 xt2 n )
669: double ( -- xt1 xt2 n )
670: stack-prefix ( stack "prefix" -- )
671: @end example
672:
1.5 anton 673:
1.10 anton 674: @c --------------------------------------------------------------------
675: @node Simple instructions, Superinstructions, Input File Grammar, Input File Format
1.3 anton 676: @section Simple instructions
1.12 ! anton 677: @cindex simple VM instruction
! 678: @cindex instruction, simple VM
1.3 anton 679:
680: We will use the following simple VM instruction description as example:
681:
682: @example
683: sub ( i1 i2 -- i )
684: i = i1-i2;
685: @end example
686:
687: The first line specifies the name of the VM instruction (@code{sub}) and
688: its stack effect (@code{i1 i2 -- i}). The rest of the description is
689: just plain C code.
690:
691: @cindex stack effect
1.12 ! anton 692: @cindex effect, stack
1.3 anton 693: The stack effect specifies that @code{sub} pulls two integers from the
1.12 ! anton 694: data stack and puts them in the C variables @code{i1} and @code{i2}
! 695: (with the rightmost item (@code{i2}) taken from the top of stack;
! 696: intuition: if you push @code{i1}, then @code{i2} on the stack, the
! 697: resulting stack picture is @code{i1 i2}) and later pushes one integer
! 698: (@code{i}) on the data stack (the rightmost item is on the top
! 699: afterwards).
! 700:
! 701: @cindex prefix, type
! 702: @cindex type prefix
! 703: @cindex default stack of a type prefix
1.3 anton 704: How do we know the type and stack of the stack items? Vmgen uses
705: prefixes, similar to Fortran; in contrast to Fortran, you have to
706: define the prefix first:
707:
708: @example
709: \E s" Cell" single data-stack type-prefix i
710: @end example
711:
712: This defines the prefix @code{i} to refer to the type @code{Cell}
713: (defined as @code{long} in @file{mini.h}) and, by default, to the
714: @code{data-stack}. It also specifies that this type takes one stack
715: item (@code{single}). The type prefix is part of the variable name.
716:
1.12 ! anton 717: @cindex stack definition
! 718: @cindex defining a stack
1.3 anton 719: Before we can use @code{data-stack} in this way, we have to define it:
720:
721: @example
722: \E stack data-stack sp Cell
723: @end example
724: @c !! use something other than Cell
725:
1.12 ! anton 726: @cindex stack basic type
! 727: @cindex basic type of a stack
! 728: @cindex type of a stack, basic
! 729: @cindex stack growth direction
1.3 anton 730: This line defines the stack @code{data-stack}, which uses the stack
731: pointer @code{sp}, and each item has the basic type @code{Cell}; other
732: types have to fit into one or two @code{Cell}s (depending on whether the
1.12 ! anton 733: type is @code{single} or @code{double} wide), and are cast from and to
! 734: Cells on accessing the @code{data-stack} with type cast macros
1.11 anton 735: (@pxref{VM engine}). Stacks grow towards lower addresses in
736: Vmgen-erated interpreters.
1.3 anton 737:
1.12 ! anton 738: @cindex stack prefix
! 739: @cindex prefix, stack
1.3 anton 740: We can override the default stack of a stack item by using a stack
741: prefix. E.g., consider the following instruction:
742:
743: @example
744: lit ( #i -- i )
745: @end example
746:
747: The VM instruction @code{lit} takes the item @code{i} from the
1.5 anton 748: instruction stream (indicated by the prefix @code{#}), and pushes it on
1.3 anton 749: the (default) data stack. The stack prefix is not part of the variable
750: name. Stack prefixes are defined like this:
751:
752: @example
753: \E inst-stream stack-prefix #
754: @end example
755:
1.5 anton 756: This definition defines that the stack prefix @code{#} specifies the
1.3 anton 757: ``stack'' @code{inst-stream}. Since the instruction stream behaves a
758: little differently than an ordinary stack, it is predefined, and you do
759: not need to define it.
760:
1.12 ! anton 761: @cindex instruction stream
1.3 anton 762: The instruction stream contains instructions and their immediate
763: arguments, so specifying that an argument comes from the instruction
764: stream indicates an immediate argument. Of course, instruction stream
765: arguments can only appear to the left of @code{--} in the stack effect.
766: If there are multiple instruction stream arguments, the leftmost is the
767: first one (just as the intuition suggests).
768:
1.10 anton 769: @menu
770: * C Code Macros:: Macros recognized by Vmgen
771: * C Code restrictions:: Vmgen makes assumptions about C code
772: @end menu
773:
774: @c --------------------------------------------------------------------
775: @node C Code Macros, C Code restrictions, Simple instructions, Simple instructions
776: @subsection C Code Macros
1.12 ! anton 777: @cindex macros recognized by Vmgen
! 778: @cindex basic block, VM level
1.5 anton 779:
780: Vmgen recognizes the following strings in the C code part of simple
781: instructions:
782:
1.12 ! anton 783: @table @code
1.5 anton 784:
785: @item SET_IP
1.12 ! anton 786: @findex SET_IP
1.11 anton 787: As far as Vmgen is concerned, a VM instruction containing this ends a VM
1.5 anton 788: basic block (used in profiling to delimit profiled sequences). On the C
789: level, this also sets the instruction pointer.
790:
791: @item SUPER_END
1.12 ! anton 792: @findex SUPER_END
! 793: This ends a basic block (for profiling), even if the instruction
! 794: contains no @code{SET_IP}.
1.5 anton 795:
796: @item TAIL;
1.12 ! anton 797: @findex TAIL;
1.5 anton 798: Vmgen replaces @samp{TAIL;} with code for ending a VM instruction and
1.12 ! anton 799: dispatching the next VM instruction. Even without a @samp{TAIL;} this
! 800: happens automatically when control reaches the end of the C code. If
! 801: you want to have this in the middle of the C code, you need to use
! 802: @samp{TAIL;}. A typical example is a conditional VM branch:
1.5 anton 803:
804: @example
1.11 anton 805: if (branch_condition) @{
1.5 anton 806: SET_IP(target); TAIL;
1.11 anton 807: @}
1.5 anton 808: /* implicit tail follows here */
809: @end example
810:
811: In this example, @samp{TAIL;} is not strictly necessary, because there
812: is another one implicitly after the if-statement, but using it improves
813: branch prediction accuracy slightly and allows other optimizations.
814:
815: @item SUPER_CONTINUE
1.12 ! anton 816: @findex SUPER_CONTINUE
1.5 anton 817: This indicates that the implicit tail at the end of the VM instruction
818: dispatches the sequentially next VM instruction even if there is a
819: @code{SET_IP} in the VM instruction. This enables an optimization that
820: is not yet implemented in the vmgen-ex code (but in Gforth). The
821: typical application is in conditional VM branches:
822:
823: @example
1.11 anton 824: if (branch_condition) @{
1.5 anton 825: SET_IP(target); TAIL; /* now this TAIL is necessary */
1.11 anton 826: @}
1.5 anton 827: SUPER_CONTINUE;
828: @end example
829:
830: @end table
831:
1.11 anton 832: Note that Vmgen is not smart about C-level tokenization, comments,
1.5 anton 833: strings, or conditional compilation, so it will interpret even a
834: commented-out SUPER_END as ending a basic block (or, e.g.,
1.11 anton 835: @samp{RETAIL;} as @samp{TAIL;}). Conversely, Vmgen requires the literal
836: presence of these strings; Vmgen will not see them if they are hiding in
1.5 anton 837: a C preprocessor macro.
838:
839:
1.10 anton 840: @c --------------------------------------------------------------------
841: @node C Code restrictions, , C Code Macros, Simple instructions
842: @subsection C Code restrictions
1.12 ! anton 843: @cindex C code restrictions
! 844: @cindex restrictions on C code
! 845: @cindex assumptions about C code
! 846:
! 847: @cindex accessing stack (pointer)
! 848: @cindex stack pointer, access
! 849: @cindex instruction pointer, access
1.5 anton 850: Vmgen generates code and performs some optimizations under the
851: assumption that the user-supplied C code does not access the stack
852: pointers or stack items, and that accesses to the instruction pointer
853: only occur through special macros. In general you should heed these
854: restrictions. However, if you need to break these restrictions, read
855: the following.
856:
857: Accessing a stack or stack pointer directly can be a problem for several
858: reasons:
1.12 ! anton 859: @cindex stack caching, restriction on C code
! 860: @cindex superinstructions, restrictions on components
1.5 anton 861:
1.11 anton 862: @itemize @bullet
1.5 anton 863:
864: @item
1.12 ! anton 865: Vmgen optionally supports caching the top-of-stack item in a local
! 866: variable (that is allocated to a register). This is the most frequent
! 867: source of trouble. You can deal with it either by not using
! 868: top-of-stack caching (slowdown factor 1-1.4, depending on machine), or
! 869: by inserting flushing code (e.g., @samp{IF_spTOS(sp[...] = spTOS);}) at
! 870: the start and reloading code (e.g., @samp{IF_spTOS(spTOS = sp[0])}) at
! 871: the end of problematic C code. Vmgen inserts a stack pointer update
! 872: before the start of the user-supplied C code, so the flushing code has
! 873: to use an index that corrects for that. In the future, this flushing
! 874: may be done automatically by mentioning a special string in the C code.
1.5 anton 875: @c sometimes flushing and/or reloading unnecessary
876:
877: @item
1.11 anton 878: The Vmgen-erated code loads the stack items from stack-pointer-indexed
1.5 anton 879: memory into variables before the user-supplied C code, and stores them
880: from variables to stack-pointer-indexed memory afterwards. If you do
881: any writes to the stack through its stack pointer in your C code, it
882: will not affact the variables, and your write may be overwritten by the
883: stores after the C code. Similarly, a read from a stack using a stack
884: pointer will not reflect computations of stack items in the same VM
885: instruction.
886:
887: @item
888: Superinstructions keep stack items in variables across the whole
889: superinstruction. So you should not include VM instructions, that
1.12 ! anton 890: access a stack or stack pointer, as components of superinstructions
! 891: (@pxref{VM profiler}).
1.5 anton 892:
893: @end itemize
894:
895: You should access the instruction pointer only through its special
896: macros (@samp{IP}, @samp{SET_IP}, @samp{IPTOS}); this ensure that these
897: macros can be implemented in several ways for best performance.
898: @samp{IP} points to the next instruction, and @samp{IPTOS} is its
899: contents.
900:
901:
1.10 anton 902: @c --------------------------------------------------------------------
1.11 anton 903: @node Superinstructions, Register Machines, Simple instructions, Input File Format
1.3 anton 904: @section Superinstructions
1.12 ! anton 905: @cindex superinstructions, defining
! 906: @cindex defining superinstructions
1.5 anton 907:
1.8 anton 908: Note: don't invest too much work in (static) superinstructions; a future
1.11 anton 909: version of Vmgen will support dynamic superinstructions (see Ian
1.8 anton 910: Piumarta and Fabio Riccardi, @cite{Optimizing Direct Threaded Code by
911: Selective Inlining}, PLDI'98), and static superinstructions have much
1.12 ! anton 912: less benefit in that context (preliminary results indicate only a factor
! 913: 1.1 speedup).
1.8 anton 914:
1.5 anton 915: Here is an example of a superinstruction definition:
916:
917: @example
918: lit_sub = lit sub
919: @end example
920:
921: @code{lit_sub} is the name of the superinstruction, and @code{lit} and
922: @code{sub} are its components. This superinstruction performs the same
923: action as the sequence @code{lit} and @code{sub}. It is generated
924: automatically by the VM code generation functions whenever that sequence
1.11 anton 925: occurs, so if you want to use this superinstruction, you just need to
926: add this definition (and even that can be partially automatized,
927: @pxref{VM profiler}).
1.5 anton 928:
1.12 ! anton 929: @cindex prefixes of superinstructions
1.5 anton 930: Vmgen requires that the component instructions are simple instructions
1.11 anton 931: defined before superinstructions using the components. Currently, Vmgen
1.5 anton 932: also requires that all the subsequences at the start of a
933: superinstruction (prefixes) must be defined as superinstruction before
934: the superinstruction. I.e., if you want to define a superinstruction
935:
936: @example
1.12 ! anton 937: foo4 = load add sub mul
1.5 anton 938: @end example
939:
1.12 ! anton 940: you first have to define @code{load}, @code{add}, @code{sub} and
! 941: @code{mul}, plus
1.5 anton 942:
943: @example
1.12 ! anton 944: foo2 = load add
! 945: foo3 = load add sub
1.5 anton 946: @end example
947:
948: Here, @code{sumof4} is the longest prefix of @code{sumof5}, and @code{sumof3}
949: is the longest prefix of @code{sumof4}.
950:
1.11 anton 951: Note that Vmgen assumes that only the code it generates accesses stack
1.5 anton 952: pointers, the instruction pointer, and various stack items, and it
953: performs optimizations based on this assumption. Therefore, VM
1.12 ! anton 954: instructions where your C code changes the instruction pointer should
! 955: only be used as last component; a VM instruction where your C code
! 956: accesses a stack pointer should not be used as component at all. Vmgen
! 957: does not check these restrictions, they just result in bugs in your
! 958: interpreter.
1.5 anton 959:
1.12 ! anton 960: @c -------------------------------------------------------------------
1.11 anton 961: @node Register Machines, , Superinstructions, Input File Format
962: @section Register Machines
1.12 ! anton 963: @cindex Register VM
! 964: @cindex Superinstructions for register VMs
! 965: @cindex tracing of register VMs
1.11 anton 966:
967: If you want to implement a register VM rather than a stack VM with
968: Vmgen, there are two ways to do it: Directly and through
969: superinstructions.
970:
971: If you use the direct way, you define instructions that take the
972: register numbers as immediate arguments, like this:
973:
974: @example
975: add3 ( #src1 #src2 #dest -- )
976: reg[dest] = reg[src1]+reg[src2];
977: @end example
978:
1.12 ! anton 979: A disadvantage of this method is that during tracing you only see the
! 980: register numbers, but not the register contents. Actually, with an
! 981: appropriate definition of @code{printarg_src} (@pxref{VM engine}), you
! 982: can print the values of the source registers on entry, but you cannot
! 983: print the value of the destination register on exit.
! 984:
1.11 anton 985: If you use superinstructions to define a register VM, you define simple
986: instructions that use a stack, and then define superinstructions that
987: have no overall stack effect, like this:
988:
989: @example
990: loadreg ( #src -- n )
991: n = reg[src];
992:
993: storereg ( n #dest -- )
994: reg[dest] = n;
995:
996: adds ( n1 n2 -- n )
997: n = n1+n2;
998:
999: add3 = loadreg loadreg adds storereg
1000: @end example
1001:
1002: An advantage of this method is that you see the values and not just the
1.12 ! anton 1003: register numbers in tracing. A disadvantage of this method is that
1.11 anton 1004: currently you cannot generate superinstructions directly, but only
1005: through generating a sequence of simple instructions (we might change
1006: this in the future if there is demand).
1007:
1008: Could the register VM support be improved, apart from the issues
1009: mentioned above? It is hard to see how to do it in a general way,
1010: because there are a number of different designs that different people
1011: mean when they use the term @emph{register machine} in connection with
1012: VM interpreters. However, if you have ideas or requests in that
1013: direction, please let me know (@pxref{Contact}).
1014:
1.5 anton 1015: @c ********************************************************************
1.10 anton 1016: @node Using the generated code, Changes, Input File Format, Top
1.5 anton 1017: @chapter Using the generated code
1.12 ! anton 1018: @cindex generated code, usage
! 1019: @cindex Using vmgen-erated code
1.5 anton 1020:
1.11 anton 1021: The easiest way to create a working VM interpreter with Vmgen is
1.12 ! anton 1022: probably to start with @file{vmgen-ex}, and modify it for your purposes.
! 1023: This chapter is just the reference manual for the macros etc. used by
! 1024: the generated code, the other context expected by the generated code,
! 1025: and what you can do with the various generated files.
1.5 anton 1026:
1.10 anton 1027: @menu
1028: * VM engine:: Executing VM code
1029: * VM instruction table::
1030: * VM code generation:: Creating VM code (in the front-end)
1031: * Peephole optimization:: Creating VM superinstructions
1032: * VM disassembler:: for debugging the front end
1033: * VM profiler:: for finding worthwhile superinstructions
1034: @end menu
1.6 anton 1035:
1.10 anton 1036: @c --------------------------------------------------------------------
1037: @node VM engine, VM instruction table, Using the generated code, Using the generated code
1.5 anton 1038: @section VM engine
1.12 ! anton 1039: @cindex VM instruction execution
! 1040: @cindex engine
! 1041: @cindex executing VM code
! 1042: @cindex @file{engine.c}
! 1043: @cindex @file{-vm.i} output file
1.5 anton 1044:
1045: The VM engine is the VM interpreter that executes the VM code. It is
1046: essential for an interpretive system.
1047:
1.6 anton 1048: Vmgen supports two methods of VM instruction dispatch: @emph{threaded
1049: code} (fast, but gcc-specific), and @emph{switch dispatch} (slow, but
1050: portable across C compilers); you can use conditional compilation
1051: (@samp{defined(__GNUC__)}) to choose between these methods, and our
1052: example does so.
1053:
1054: For both methods, the VM engine is contained in a C-level function.
1055: Vmgen generates most of the contents of the function for you
1056: (@file{@var{name}-vm.i}), but you have to define this function, and
1057: macros and variables used in the engine, and initialize the variables.
1058: In our example the engine function also includes
1059: @file{@var{name}-labels.i} (@pxref{VM instruction table}).
1060:
1.12 ! anton 1061: @cindex tracing VM code
! 1062: In addition to executing the code, the VM engine can optionally also
! 1063: print out a trace of the executed instructions, their arguments and
! 1064: results. For superinstructions it prints the trace as if only component
! 1065: instructions were executed; this allows to introduce new
! 1066: superinstructions while keeping the traces comparable to old ones
! 1067: (important for regression tests).
! 1068:
! 1069: It costs significant performance to check in each instruction whether to
! 1070: print tracing code, so we recommend producing two copies of the engine:
! 1071: one for fast execution, and one for tracing. See the rules for
! 1072: @file{engine.o} and @file{engine-debug.o} in @file{vmgen-ex/Makefile}
! 1073: for an example.
! 1074:
1.6 anton 1075: The following macros and variables are used in @file{@var{name}-vm.i}:
1.5 anton 1076:
1077: @table @code
1078:
1.12 ! anton 1079: @findex LABEL
1.5 anton 1080: @item LABEL(@var{inst_name})
1081: This is used just before each VM instruction to provide a jump or
1.11 anton 1082: @code{switch} label (the @samp{:} is provided by Vmgen). For switch
1.5 anton 1083: dispatch this should expand to @samp{case @var{label}}; for
1.12 ! anton 1084: threaded-code dispatch this should just expand to @samp{@var{label}}.
! 1085: In either case @var{label} is usually the @var{inst_name} with some
! 1086: prefix or suffix to avoid naming conflicts.
1.5 anton 1087:
1.12 ! anton 1088: @findex LABEL2
1.9 anton 1089: @item LABEL2(@var{inst_name})
1090: This will be used for dynamic superinstructions; at the moment, this
1091: should expand to nothing.
1092:
1.12 ! anton 1093: @findex NAME
1.5 anton 1094: @item NAME(@var{inst_name_string})
1095: Called on entering a VM instruction with a string containing the name of
1096: the VM instruction as parameter. In normal execution this should be a
1097: noop, but for tracing this usually prints the name, and possibly other
1098: information (several VM registers in our example).
1099:
1.12 ! anton 1100: @findex DEF_CA
1.5 anton 1101: @item DEF_CA
1102: Usually empty. Called just inside a new scope at the start of a VM
1103: instruction. Can be used to define variables that should be visible
1104: during every VM instruction. If you define this macro as non-empty, you
1105: have to provide the finishing @samp{;} in the macro.
1106:
1.12 ! anton 1107: @findex NEXT_P0
! 1108: @findex NEXT_P1
! 1109: @findex NEXT_P2
1.5 anton 1110: @item NEXT_P0 NEXT_P1 NEXT_P2
1111: The three parts of instruction dispatch. They can be defined in
1112: different ways for best performance on various processors (see
1113: @file{engine.c} in the example or @file{engine/threaded.h} in Gforth).
1.12 ! anton 1114: @samp{NEXT_P0} is invoked right at the start of the VM instruction (but
1.5 anton 1115: after @samp{DEF_CA}), @samp{NEXT_P1} right after the user-supplied C
1116: code, and @samp{NEXT_P2} at the end. The actual jump has to be
1117: performed by @samp{NEXT_P2}.
1118:
1119: The simplest variant is if @samp{NEXT_P2} does everything and the other
1120: macros do nothing. Then also related macros like @samp{IP},
1121: @samp{SET_IP}, @samp{IP}, @samp{INC_IP} and @samp{IPTOS} are very
1122: straightforward to define. For switch dispatch this code consists just
1.12 ! anton 1123: of a jump to the dispatch code (@samp{goto next_inst;} in our example);
1.5 anton 1124: for direct threaded code it consists of something like
1.11 anton 1125: @samp{(@{cfa=*ip++; goto *cfa;@})}.
1.5 anton 1126:
1.12 ! anton 1127: Pulling code (usually the @samp{cfa=*ip++;}) up into @samp{NEXT_P1}
1.5 anton 1128: usually does not cause problems, but pulling things up into
1129: @samp{NEXT_P0} usually requires changing the other macros (and, at least
1130: for Gforth on Alpha, it does not buy much, because the compiler often
1131: manages to schedule the relevant stuff up by itself). An even more
1132: extreme variant is to pull code up even further, into, e.g., NEXT_P1 of
1133: the previous VM instruction (prefetching, useful on PowerPCs).
1134:
1.12 ! anton 1135: @findex INC_IP
1.5 anton 1136: @item INC_IP(@var{n})
1.8 anton 1137: This increments @code{IP} by @var{n}.
1138:
1.12 ! anton 1139: @findex SET_IP
1.8 anton 1140: @item SET_IP(@var{target})
1141: This sets @code{IP} to @var{target}.
1.5 anton 1142:
1.12 ! anton 1143: @cindex type cast macro
! 1144: @findex vm_@var{A}2@var{B}
1.5 anton 1145: @item vm_@var{A}2@var{B}(a,b)
1146: Type casting macro that assigns @samp{a} (of type @var{A}) to @samp{b}
1147: (of type @var{B}). This is mainly used for getting stack items into
1148: variables and back. So you need to define macros for every combination
1149: of stack basic type (@code{Cell} in our example) and type-prefix types
1150: used with that stack (in both directions). For the type-prefix type,
1151: you use the type-prefix (not the C type string) as type name (e.g.,
1152: @samp{vm_Cell2i}, not @samp{vm_Cell2Cell}). In addition, you have to
1.12 ! anton 1153: define a vm_@var{X}2@var{X} macro for the stack's basic type @var{X}
! 1154: (used in superinstructions).
1.5 anton 1155:
1.12 ! anton 1156: @cindex instruction stream, basic type
1.5 anton 1157: The stack basic type for the predefined @samp{inst-stream} is
1158: @samp{Cell}. If you want a stack with the same item size, making its
1159: basic type @samp{Cell} usually reduces the number of macros you have to
1160: define.
1161:
1.12 ! anton 1162: @cindex unions in type cast macros
! 1163: @cindex casts in type cast macros
! 1164: @cindex type casting between floats and integers
1.5 anton 1165: Here our examples differ a lot: @file{vmgen-ex} uses casts in these
1166: macros, whereas @file{vmgen-ex2} uses union-field selection (or
1.12 ! anton 1167: assignment to union fields). Note that casting floats into integers and
! 1168: vice versa changes the bit pattern (and you do not want that). In this
! 1169: case your options are to use a (temporary) union, or to take the address
! 1170: of the value, cast the pointer, and dereference that (not always
! 1171: possible, and sometimes expensive).
1.5 anton 1172:
1.12 ! anton 1173: @findex vm_two@var{A}2@var{B}
! 1174: @findex vm_@var{B}2two@var{A}
1.5 anton 1175: @item vm_two@var{A}2@var{B}(a1,a2,b)
1176: @item vm_@var{B}2two@var{A}(b,a1,a2)
1.12 ! anton 1177: Type casting between two stack items (@code{a1}, @code{a2}) and a
1.5 anton 1178: variable @code{b} of a type that takes two stack items. This does not
1.12 ! anton 1179: occur in our small examples, but you can look at Gforth for examples
! 1180: (see @code{vm_twoCell2d} in @file{engine/forth.h}).
1.5 anton 1181:
1.12 ! anton 1182: @cindex stack pointer definition
! 1183: @cindex instruction pointer definition
1.5 anton 1184: @item @var{stackpointer}
1185: For each stack used, the stackpointer name given in the stack
1186: declaration is used. For a regular stack this must be an l-expression;
1187: typically it is a variable declared as a pointer to the stack's basic
1188: type. For @samp{inst-stream}, the name is @samp{IP}, and it can be a
1189: plain r-value; typically it is a macro that abstracts away the
1.12 ! anton 1190: differences between the various implementations of @code{NEXT_P*}.
1.5 anton 1191:
1.12 ! anton 1192: @cindex top of stack caching
! 1193: @cindex stack caching
! 1194: @cindex TOS
! 1195: @findex IPTOS
1.5 anton 1196: @item @var{stackpointer}TOS
1197: The top-of-stack for the stack pointed to by @var{stackpointer}. If you
1198: are using top-of-stack caching for that stack, this should be defined as
1199: variable; if you are not using top-of-stack caching for that stack, this
1200: should be a macro expanding to @samp{@var{stackpointer}[0]}. The stack
1201: pointer for the predefined @samp{inst-stream} is called @samp{IP}, so
1202: the top-of-stack is called @samp{IPTOS}.
1203:
1.12 ! anton 1204: @findex IF_@var{stackpointer}TOS
1.5 anton 1205: @item IF_@var{stackpointer}TOS(@var{expr})
1206: Macro for executing @var{expr}, if top-of-stack caching is used for the
1207: @var{stackpointer} stack. I.e., this should do @var{expr} if there is
1208: top-of-stack caching for @var{stackpointer}; otherwise it should do
1209: nothing.
1210:
1.12 ! anton 1211: @findex SUPER_END
1.8 anton 1212: @item SUPER_END
1213: This is used by the VM profiler (@pxref{VM profiler}); it should not do
1214: anything in normal operation, and call @code{vm_count_block(IP)} for
1215: profiling.
1216:
1.12 ! anton 1217: @findex SUPER_CONTINUE
1.8 anton 1218: @item SUPER_CONTINUE
1.11 anton 1219: This is just a hint to Vmgen and does nothing at the C level.
1.8 anton 1220:
1.12 ! anton 1221: @findex VM_DEBUG
1.5 anton 1222: @item VM_DEBUG
1223: If this is defined, the tracing code will be compiled in (slower
1224: interpretation, but better debugging). Our example compiles two
1225: versions of the engine, a fast-running one that cannot trace, and one
1226: with potential tracing and profiling.
1227:
1.12 ! anton 1228: @findex vm_debug
1.5 anton 1229: @item vm_debug
1230: Needed only if @samp{VM_DEBUG} is defined. If this variable contains
1231: true, the VM instructions produce trace output. It can be turned on or
1232: off at any time.
1233:
1.12 ! anton 1234: @findex vm_out
1.5 anton 1235: @item vm_out
1236: Needed only if @samp{VM_DEBUG} is defined. Specifies the file on which
1237: to print the trace output (type @samp{FILE *}).
1238:
1.12 ! anton 1239: @findex printarg_@var{type}
1.5 anton 1240: @item printarg_@var{type}(@var{value})
1241: Needed only if @samp{VM_DEBUG} is defined. Macro or function for
1242: printing @var{value} in a way appropriate for the @var{type}. This is
1243: used for printing the values of stack items during tracing. @var{Type}
1244: is normally the type prefix specified in a @code{type-prefix} definition
1245: (e.g., @samp{printarg_i}); in superinstructions it is currently the
1246: basic type of the stack.
1247:
1248: @end table
1249:
1.6 anton 1250:
1.10 anton 1251: @c --------------------------------------------------------------------
1252: @node VM instruction table, VM code generation, VM engine, Using the generated code
1253: @section VM instruction table
1.12 ! anton 1254: @cindex instruction table
! 1255: @cindex opcode definition
! 1256: @cindex labels for threaded code
! 1257: @cindex @code{vm_prim}, definition
! 1258: @cindex @file{-labels.i} output file
1.6 anton 1259:
1260: For threaded code we also need to produce a table containing the labels
1261: of all VM instructions. This is needed for VM code generation
1262: (@pxref{VM code generation}), and it has to be done in the engine
1263: function, because the labels are not visible outside. It then has to be
1264: passed outside the function (and assigned to @samp{vm_prim}), to be used
1265: by the VM code generation functions.
1266:
1267: This means that the engine function has to be called first to produce
1268: the VM instruction table, and later, after generating VM code, it has to
1269: be called again to execute the generated VM code (yes, this is ugly).
1270: In our example program, these two modes of calling the engine function
1271: are differentiated by the value of the parameter ip0 (if it equals 0,
1272: then the table is passed out, otherwise the VM code is executed); in our
1273: example, we pass the table out by assigning it to @samp{vm_prim} and
1274: returning from @samp{engine}.
1275:
1.12 ! anton 1276: In our example (@file{vmgen-ex/engine.c}), we also build such a table for
! 1277: switch dispatch; this is mainly done for uniformity.
1.6 anton 1278:
1279: For switch dispatch, we also need to define the VM instruction opcodes
1280: used as case labels in an @code{enum}.
1281:
1282: For both purposes (VM instruction table, and enum), the file
1.11 anton 1283: @file{@var{name}-labels.i} is generated by Vmgen. You have to define
1.6 anton 1284: the following macro used in this file:
1.5 anton 1285:
1.12 ! anton 1286: @table @code
1.5 anton 1287:
1.12 ! anton 1288: @findex INST_ADDR
1.5 anton 1289: @item INST_ADDR(@var{inst_name})
1290: For switch dispatch, this is just the name of the switch label (the same
1.6 anton 1291: name as used in @samp{LABEL(@var{inst_name})}), for both uses of
1292: @file{@var{name}-labels.i}. For threaded-code dispatch, this is the
1293: address of the label defined in @samp{LABEL(@var{inst_name})}); the
1.11 anton 1294: address is taken with @samp{&&} (@pxref{Labels as Values, , Labels as
1295: Values, gcc.info, GNU C Manual}).
1.5 anton 1296:
1297: @end table
1298:
1299:
1.10 anton 1300: @c --------------------------------------------------------------------
1301: @node VM code generation, Peephole optimization, VM instruction table, Using the generated code
1.6 anton 1302: @section VM code generation
1.12 ! anton 1303: @cindex VM code generation
! 1304: @cindex code generation, VM
! 1305: @cindex @file{-gen.i} output file
1.6 anton 1306:
1307: Vmgen generates VM code generation functions in @file{@var{name}-gen.i}
1308: that the front end can call to generate VM code. This is essential for
1309: an interpretive system.
1310:
1.12 ! anton 1311: @findex gen_@var{inst}
1.11 anton 1312: For a VM instruction @samp{x ( #a b #c -- d )}, Vmgen generates a
1.6 anton 1313: function with the prototype
1314:
1315: @example
1316: void gen_x(Inst **ctp, a_type a, c_type c)
1317: @end example
1318:
1319: The @code{ctp} argument points to a pointer to the next instruction.
1320: @code{*ctp} is increased by the generation functions; i.e., you should
1321: allocate memory for the code to be generated beforehand, and start with
1322: *ctp set at the start of this memory area. Before running out of
1323: memory, allocate a new area, and generate a VM-level jump to the new
1.12 ! anton 1324: area (this overflow handling is not implemented in our examples).
1.6 anton 1325:
1.12 ! anton 1326: @cindex immediate arguments, VM code generation
1.6 anton 1327: The other arguments correspond to the immediate arguments of the VM
1328: instruction (with their appropriate types as defined in the
1329: @code{type_prefix} declaration.
1330:
1331: The following types, variables, and functions are used in
1332: @file{@var{name}-gen.i}:
1333:
1.12 ! anton 1334: @table @code
1.6 anton 1335:
1.12 ! anton 1336: @findex Inst
1.6 anton 1337: @item Inst
1338: The type of the VM instruction; if you use threaded code, this is
1339: @code{void *}; for switch dispatch this is an integer type.
1340:
1.12 ! anton 1341: @cindex @code{vm_prim}, use
1.6 anton 1342: @item vm_prim
1343: The VM instruction table (type: @code{Inst *}, @pxref{VM instruction table}).
1344:
1.12 ! anton 1345: @findex gen_inst
1.6 anton 1346: @item gen_inst(Inst **ctp, Inst i)
1347: This function compiles the instruction @code{i}. Take a look at it in
1348: @file{vmgen-ex/peephole.c}. It is trivial when you don't want to use
1349: superinstructions (just the last two lines of the example function), and
1350: slightly more complicated in the example due to its ability to use
1351: superinstructions (@pxref{Peephole optimization}).
1352:
1.12 ! anton 1353: @findex genarg_@var{type_prefix}
1.6 anton 1354: @item genarg_@var{type_prefix}(Inst **ctp, @var{type} @var{type_prefix})
1355: This compiles an immediate argument of @var{type} (as defined in a
1356: @code{type-prefix} definition). These functions are trivial to define
1357: (see @file{vmgen-ex/support.c}). You need one of these functions for
1358: every type that you use as immediate argument.
1359:
1360: @end table
1361:
1.12 ! anton 1362: @findex BB_BOUNDARY
1.6 anton 1363: In addition to using these functions to generate code, you should call
1364: @code{BB_BOUNDARY} at every basic block entry point if you ever want to
1365: use superinstructions (or if you want to use the profiling supported by
1.12 ! anton 1366: Vmgen; but this support is also useful mainly for selecting
! 1367: superinstructions). If you use @code{BB_BOUNDARY}, you should also
! 1368: define it (take a look at its definition in @file{vmgen-ex/mini.y}).
1.6 anton 1369:
1370: You do not need to call @code{BB_BOUNDARY} after branches, because you
1371: will not define superinstructions that contain branches in the middle
1372: (and if you did, and it would work, there would be no reason to end the
1373: superinstruction at the branch), and because the branches announce
1374: themselves to the profiler.
1375:
1376:
1.10 anton 1377: @c --------------------------------------------------------------------
1378: @node Peephole optimization, VM disassembler, VM code generation, Using the generated code
1.6 anton 1379: @section Peephole optimization
1.12 ! anton 1380: @cindex peephole optimization
! 1381: @cindex superinstructions, generating
! 1382: @cindex @file{peephole.c}
! 1383: @cindex @file{-peephole.i} output file
1.6 anton 1384:
1385: You need peephole optimization only if you want to use
1386: superinstructions. But having the code for it does not hurt much if you
1387: do not use superinstructions.
1388:
1389: A simple greedy peephole optimization algorithm is used for
1390: superinstruction selection: every time @code{gen_inst} compiles a VM
1.12 ! anton 1391: instruction, it checks if it can combine it with the last VM instruction
1.6 anton 1392: (which may also be a superinstruction resulting from a previous peephole
1393: optimization); if so, it changes the last instruction to the combined
1394: instruction instead of laying down @code{i} at the current @samp{*ctp}.
1395:
1396: The code for peephole optimization is in @file{vmgen-ex/peephole.c}.
1397: You can use this file almost verbatim. Vmgen generates
1398: @file{@var{file}-peephole.i} which contains data for the peephoile
1399: optimizer.
1400:
1.12 ! anton 1401: @findex init_peeptable
1.6 anton 1402: You have to call @samp{init_peeptable()} after initializing
1403: @samp{vm_prim}, and before compiling any VM code to initialize data
1404: structures for peephole optimization. After that, compiling with the VM
1405: code generation functions will automatically combine VM instructions
1406: into superinstructions. Since you do not want to combine instructions
1407: across VM branch targets (otherwise there will not be a proper VM
1408: instruction to branch to), you have to call @code{BB_BOUNDARY}
1409: (@pxref{VM code generation}) at branch targets.
1410:
1411:
1.10 anton 1412: @c --------------------------------------------------------------------
1413: @node VM disassembler, VM profiler, Peephole optimization, Using the generated code
1.6 anton 1414: @section VM disassembler
1.12 ! anton 1415: @cindex VM disassembler
! 1416: @cindex disassembler, VM code
! 1417: @cindex @file{disasm.c}
! 1418: @cindex @file{-disasm.i} output file
1.6 anton 1419:
1420: A VM code disassembler is optional for an interpretive system, but
1421: highly recommended during its development and maintenance, because it is
1422: very useful for detecting bugs in the front end (and for distinguishing
1423: them from VM interpreter bugs).
1424:
1425: Vmgen supports VM code disassembling by generating
1426: @file{@var{file}-disasm.i}. This code has to be wrapped into a
1.12 ! anton 1427: function, as is done in @file{vmgen-ex/disasm.c}. You can use this file
1.6 anton 1428: almost verbatim. In addition to @samp{vm_@var{A}2@var{B}(a,b)},
1429: @samp{vm_out}, @samp{printarg_@var{type}(@var{value})}, which are
1430: explained above, the following macros and variables are used in
1431: @file{@var{file}-disasm.i} (and you have to define them):
1432:
1.12 ! anton 1433: @table @code
1.6 anton 1434:
1435: @item ip
1436: This variable points to the opcode of the current VM instruction.
1437:
1.12 ! anton 1438: @cindex @code{IP}, @code{IPTOS} in disassmbler
1.6 anton 1439: @item IP IPTOS
1440: @samp{IPTOS} is the first argument of the current VM instruction, and
1441: @samp{IP} points to it; this is just as in the engine, but here
1442: @samp{ip} points to the opcode of the VM instruction (in contrast to the
1443: engine, where @samp{ip} points to the next cell, or even one further).
1444:
1.12 ! anton 1445: @findex VM_IS_INST
1.6 anton 1446: @item VM_IS_INST(Inst i, int n)
1447: Tests if the opcode @samp{i} is the same as the @samp{n}th entry in the
1448: VM instruction table.
1449:
1450: @end table
1451:
1452:
1.10 anton 1453: @c --------------------------------------------------------------------
1454: @node VM profiler, , VM disassembler, Using the generated code
1.7 anton 1455: @section VM profiler
1.12 ! anton 1456: @cindex VM profiler
! 1457: @cindex profiling for selecting superinstructions
! 1458: @cindex superinstructions and profiling
! 1459: @cindex @file{profile.c}
! 1460: @cindex @file{-profile.i} output file
1.7 anton 1461:
1462: The VM profiler is designed for getting execution and occurence counts
1463: for VM instruction sequences, and these counts can then be used for
1464: selecting sequences as superinstructions. The VM profiler is probably
1.8 anton 1465: not useful as profiling tool for the interpretive system. I.e., the VM
1.7 anton 1466: profiler is useful for the developers, but not the users of the
1.8 anton 1467: interpretive system.
1.7 anton 1468:
1.8 anton 1469: The output of the profiler is: for each basic block (executed at least
1470: once), it produces the dynamic execution count of that basic block and
1471: all its subsequences; e.g.,
1.7 anton 1472:
1.8 anton 1473: @example
1474: 9227465 lit storelocal
1475: 9227465 storelocal branch
1476: 9227465 lit storelocal branch
1477: @end example
1.7 anton 1478:
1.8 anton 1479: I.e., a basic block consisting of @samp{lit storelocal branch} is
1480: executed 9227465 times.
1.6 anton 1481:
1.12 ! anton 1482: @cindex @file{stat.awk}
! 1483: @cindex @file{seq2rule.awk}
1.8 anton 1484: This output can be combined in various ways. E.g.,
1.12 ! anton 1485: @file{vmgen-ex/stat.awk} adds up the occurences of a given sequence wrt
1.8 anton 1486: dynamic execution, static occurence, and per-program occurence. E.g.,
1.3 anton 1487:
1.8 anton 1488: @example
1489: 2 16 36910041 loadlocal lit
1490: @end example
1.2 anton 1491:
1.12 ! anton 1492: @noindent
1.8 anton 1493: indicates that the sequence @samp{loadlocal lit} occurs in 2 programs,
1494: in 16 places, and has been executed 36910041 times. Now you can select
1495: superinstructions in any way you like (note that compile time and space
1496: typically limit the number of superinstructions to 100--1000). After
1497: you have done that, @file{vmgen/seq2rule.awk} turns lines of the form
1.11 anton 1498: above into rules for inclusion in a Vmgen input file. Note that this
1.8 anton 1499: script does not ensure that all prefixes are defined, so you have to do
1500: that in other ways. So, an overall script for turning profiles into
1501: superinstructions can look like this:
1.2 anton 1502:
1.8 anton 1503: @example
1504: awk -f stat.awk fib.prof test.prof|
1505: awk '$3>=10000'| #select sequences
1506: fgrep -v -f peephole-blacklist| #eliminate wrong instructions
1507: awk -f seq2rule.awk| #turn into superinstructions
1508: sort -k 3 >mini-super.vmg #sort sequences
1509: @end example
1.2 anton 1510:
1.8 anton 1511: Here the dynamic count is used for selecting sequences (preliminary
1512: results indicate that the static count gives better results, though);
1.12 ! anton 1513: the third line eliminates sequences containing instructions that must not
1.8 anton 1514: occur in a superinstruction, because they access a stack directly. The
1515: dynamic count selection ensures that all subsequences (including
1516: prefixes) of longer sequences occur (because subsequences have at least
1517: the same count as the longer sequences); the sort in the last line
1518: ensures that longer superinstructions occur after their prefixes.
1519:
1.12 ! anton 1520: But before using this, you have to have the profiler. Vmgen supports its
1.8 anton 1521: creation by generating @file{@var{file}-profile.i}; you also need the
1522: wrapper file @file{vmgen-ex/profile.c} that you can use almost verbatim.
1523:
1.12 ! anton 1524: @cindex @code{SUPER_END} in profiling
! 1525: @cindex @code{BB_BOUNDARY} in profiling
1.8 anton 1526: The profiler works by recording the targets of all VM control flow
1527: changes (through @code{SUPER_END} during execution, and through
1528: @code{BB_BOUNDARY} in the front end), and counting (through
1529: @code{SUPER_END}) how often they were targeted. After the program run,
1530: the numbers are corrected such that each VM basic block has the correct
1.12 ! anton 1531: count (entering a block without executing a branch does not increase the
! 1532: count, and the correction fixes that), then the subsequences of all
! 1533: basic blocks are printed. To get all this, you just have to define
! 1534: @code{SUPER_END} (and @code{BB_BOUNDARY}) appropriately, and call
! 1535: @code{vm_print_profile(FILE *file)} when you want to output the profile
! 1536: on @code{file}.
1.8 anton 1537:
1.12 ! anton 1538: @cindex @code{VM_IS_INST} in profiling
! 1539: The @file{@var{file}-profile.i} is similar to the disassembler file, and
1.8 anton 1540: it uses variables and functions defined in @file{vmgen-ex/profile.c},
1541: plus @code{VM_IS_INST} already defined for the VM disassembler
1542: (@pxref{VM disassembler}).
1543:
1.10 anton 1544:
1545: @c **********************************************************
1546: @node Changes, Contact, Using the generated code, Top
1.8 anton 1547: @chapter Changes
1.12 ! anton 1548: @cindex Changes from old versions
1.8 anton 1549:
1.11 anton 1550: Users of the gforth-0.5.9-20010501 version of Vmgen need to change
1.8 anton 1551: several things in their source code to use the current version. I
1552: recommend keeping the gforth-0.5.9-20010501 version until you have
1553: completed the change (note that you can have several versions of Gforth
1554: installed at the same time). I hope to avoid such incompatible changes
1555: in the future.
1.2 anton 1556:
1.8 anton 1557: The required changes are:
1558:
1559: @table @code
1.2 anton 1560:
1.12 ! anton 1561: @cindex @code{vm_@var{A}2@var{B}}, changes
1.8 anton 1562: @item vm_@var{A}2@var{B}
1563: now takes two arguments.
1564:
1.12 ! anton 1565: @cindex @code{vm_two@var{A}2@var{B}}, changes
1.8 anton 1566: @item vm_two@var{A}2@var{B}(b,a1,a2);
1567: changed to vm_two@var{A}2@var{B}(a1,a2,b) (note the absence of the @samp{;}).
1568:
1569: @end table
1.2 anton 1570:
1.8 anton 1571: Also some new macros have to be defined, e.g., @code{INST_ADDR}, and
1572: @code{LABEL}; some macros have to be defined in new contexts, e.g.,
1573: @code{VM_IS_INST} is now also needed in the disassembler.
1.4 anton 1574:
1.12 ! anton 1575: @c *********************************************************
1.10 anton 1576: @node Contact, Copying This Manual, Changes, Top
1.8 anton 1577: @chapter Contact
1.4 anton 1578:
1.12 ! anton 1579: @c ***********************************************************
1.10 anton 1580: @node Copying This Manual, Index, Contact, Top
1581: @appendix Copying This Manual
1582:
1583: @menu
1584: * GNU Free Documentation License:: License for copying this manual.
1585: @end menu
1586:
1587: @include fdl.texi
1588:
1589:
1590: @node Index, , Copying This Manual, Top
1591: @unnumbered Index
1592:
1593: @printindex cp
1594:
1595: @bye
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>