1: %% TeX macros to handle texinfo files
2:
3: % Copyright (C) 1985, 86, 88, 90, 91, 92, 93,
4: % 94, 95, 1996 Free Software Foundation, Inc.
5:
6: %This texinfo.tex file is free software; you can redistribute it and/or
7: %modify it under the terms of the GNU General Public License as
8: %published by the Free Software Foundation; either version 2, or (at
9: %your option) any later version.
10:
11: %This texinfo.tex file is distributed in the hope that it will be
12: %useful, but WITHOUT ANY WARRANTY; without even the implied warranty
13: %of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
14: %General Public License for more details.
15:
16: %You should have received a copy of the GNU General Public License
17: %along with this texinfo.tex file; see the file COPYING. If not, write
18: %to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
19: %Boston, MA 02111-1307, USA.
20:
21:
22: %In other words, you are welcome to use, share and improve this program.
23: %You are forbidden to forbid anyone else to use, share and improve
24: %what you give them. Help stamp out software-hoarding!
25:
26:
27: % Send bug reports to bug-texinfo@prep.ai.mit.edu.
28: % Please include a *precise* test case in each bug report.
29:
30:
31: % Make it possible to create a .fmt file just by loading this file:
32: % if the underlying format is not loaded, start by loading it now.
33: % Added by gildea November 1993.
34: \expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
35:
36: % This automatically updates the version number based on RCS.
37: \def\deftexinfoversion$#1: #2 ${\def\texinfoversion{#2}}
38: \deftexinfoversion$Revision: 1.1 $
39: \message{Loading texinfo package [Version \texinfoversion]:}
40:
41: % If in a .fmt file, print the version number
42: % and turn on active characters that we couldn't do earlier because
43: % they might have appeared in the input file name.
44: \everyjob{\message{[Texinfo version \texinfoversion]}\message{}
45: \catcode`+=\active \catcode`\_=\active}
46:
47: % Save some parts of plain tex whose names we will redefine.
48:
49: \let\ptexb=\b
50: \let\ptexbullet=\bullet
51: \let\ptexc=\c
52: \let\ptexcomma=\,
53: \let\ptexdot=\.
54: \let\ptexdots=\dots
55: \let\ptexend=\end
56: \let\ptexequiv = \equiv
57: \let\ptexi=\i
58: \let\ptexlbrace=\{
59: \let\ptexrbrace=\}
60: \let\ptexstar=\*
61: \let\ptext=\t
62: \let\ptextilde=\~
63:
64: % Be sure we're in horizontal mode when doing a tie, since we make space
65: % equivalent to this in @example-like environments. Otherwise, a space
66: % at the beginning of a line will start with \penalty -- and
67: % since \penalty is valid in vertical mode, we'd end up putting the
68: % penalty on the vertical list instead of in the new paragraph.
69: {\catcode`@ = 11
70: % Avoid using \@M directly, because that causes trouble
71: % if the definition is written into an index file.
72: \global\let\tiepenalty = \@M
73: \gdef\tie{\leavevmode\penalty\tiepenalty\ }
74: }
75: \let\~ = \tie % And make it available as @~.
76:
77:
78: \message{Basics,}
79: \chardef\other=12
80:
81: % If this character appears in an error message or help string, it
82: % starts a new line in the output.
83: \newlinechar = `^^J
84:
85: % Set up fixed words for English.
86: \ifx\putwordChapter\undefined{\gdef\putwordChapter{Chapter}}\fi%
87: \def\putwordInfo{Info}%
88: \ifx\putwordSee\undefined{\gdef\putwordSee{See}}\fi%
89: \ifx\putwordsee\undefined{\gdef\putwordsee{see}}\fi%
90: \ifx\putwordfile\undefined{\gdef\putwordfile{file}}\fi%
91: \ifx\putwordpage\undefined{\gdef\putwordpage{page}}\fi%
92: \ifx\putwordsection\undefined{\gdef\putwordsection{section}}\fi%
93: \ifx\putwordSection\undefined{\gdef\putwordSection{Section}}\fi%
94: \ifx\putwordTableofContents\undefined{\gdef\putwordTableofContents{Table of Contents}}\fi%
95: \ifx\putwordShortContents\undefined{\gdef\putwordShortContents{Short Contents}}\fi%
96: \ifx\putwordAppendix\undefined{\gdef\putwordAppendix{Appendix}}\fi%
97:
98: % Ignore a token.
99: %
100: \def\gobble#1{}
101:
102: \hyphenation{ap-pen-dix}
103: \hyphenation{mini-buf-fer mini-buf-fers}
104: \hyphenation{eshell}
105:
106: % Margin to add to right of even pages, to left of odd pages.
107: \newdimen \bindingoffset
108: \newdimen \normaloffset
109: \newdimen\pagewidth \newdimen\pageheight
110:
111: % Sometimes it is convenient to have everything in the transcript file
112: % and nothing on the terminal. We don't just call \tracingall here,
113: % since that produces some useless output on the terminal.
114: %
115: \def\gloggingall{\begingroup \globaldefs = 1 \loggingall \endgroup}%
116: \def\loggingall{\tracingcommands2 \tracingstats2
117: \tracingpages1 \tracingoutput1 \tracinglostchars1
118: \tracingmacros2 \tracingparagraphs1 \tracingrestores1
119: \showboxbreadth\maxdimen\showboxdepth\maxdimen
120: }%
121:
122: %---------------------Begin change-----------------------
123: %
124: %%%% For @cropmarks command.
125: % Dimensions to add cropmarks at corners Added by P. A. MacKay, 12 Nov. 1986
126: %
127: \newdimen\cornerlong \newdimen\cornerthick
128: \newdimen \topandbottommargin
129: \newdimen \outerhsize \newdimen \outervsize
130: \cornerlong=1pc\cornerthick=.3pt % These set size of cropmarks
131: \outerhsize=7in
132: %\outervsize=9.5in
133: % Alternative @smallbook page size is 9.25in
134: \outervsize=9.25in
135: \topandbottommargin=.75in
136: %
137: %---------------------End change-----------------------
138:
139: % \onepageout takes a vbox as an argument. Note that \pagecontents
140: % does insertions, but you have to call it yourself.
141: \chardef\PAGE=255 \output={\onepageout{\pagecontents\PAGE}}
142: \def\onepageout#1{%
143: \hoffset=\normaloffset
144: \ifodd\pageno \advance\hoffset by \bindingoffset
145: \else \advance\hoffset by -\bindingoffset\fi
146: {%
147: \escapechar = `\\ % use backslash in output files.
148: \indexdummies
149: \shipout\vbox{%
150: {\let\hsize=\pagewidth \makeheadline}%
151: \pagebody{#1}%
152: {\let\hsize=\pagewidth \makefootline}%
153: }%
154: }%
155: \advancepageno
156: \ifnum\outputpenalty>-20000 \else\dosupereject\fi
157: }
158:
159: %%%% For @cropmarks command %%%%
160:
161: % Here is a modification of the main output routine for Near East Publications
162: % This provides right-angle cropmarks at all four corners.
163: % The contents of the page are centerlined into the cropmarks,
164: % and any desired binding offset is added as an \hskip on either
165: % site of the centerlined box. (P. A. MacKay, 12 November, 1986)
166: %
167: \def\croppageout#1{\hoffset=0pt % make sure this doesn't mess things up
168: {\escapechar=`\\\relax % makes sure backslash is used in output files.
169: \shipout
170: \vbox to \outervsize{\hsize=\outerhsize
171: \vbox{\line{\ewtop\hfill\ewtop}}
172: \nointerlineskip
173: \line{\vbox{\moveleft\cornerthick\nstop}
174: \hfill
175: \vbox{\moveright\cornerthick\nstop}}
176: \vskip \topandbottommargin
177: \centerline{\ifodd\pageno\hskip\bindingoffset\fi
178: \vbox{
179: {\let\hsize=\pagewidth \makeheadline}
180: \pagebody{#1}
181: {\let\hsize=\pagewidth \makefootline}}
182: \ifodd\pageno\else\hskip\bindingoffset\fi}
183: \vskip \topandbottommargin plus1fill minus1fill
184: \boxmaxdepth\cornerthick
185: \line{\vbox{\moveleft\cornerthick\nsbot}
186: \hfill
187: \vbox{\moveright\cornerthick\nsbot}}
188: \nointerlineskip
189: \vbox{\line{\ewbot\hfill\ewbot}}
190: }}
191: \advancepageno
192: \ifnum\outputpenalty>-20000 \else\dosupereject\fi}
193: %
194: % Do @cropmarks to get crop marks
195: \def\cropmarks{\let\onepageout=\croppageout }
196:
197: \newinsert\margin \dimen\margin=\maxdimen
198:
199: \def\pagebody#1{\vbox to\pageheight{\boxmaxdepth=\maxdepth #1}}
200: {\catcode`\@ =11
201: \gdef\pagecontents#1{\ifvoid\topins\else\unvbox\topins\fi
202: % marginal hacks, juha@viisa.uucp (Juha Takala)
203: \ifvoid\margin\else % marginal info is present
204: \rlap{\kern\hsize\vbox to\z@{\kern1pt\box\margin \vss}}\fi
205: \dimen@=\dp#1 \unvbox#1
206: \ifvoid\footins\else\vskip\skip\footins\footnoterule \unvbox\footins\fi
207: \ifr@ggedbottom \kern-\dimen@ \vfil \fi}
208: }
209:
210: %
211: % Here are the rules for the cropmarks. Note that they are
212: % offset so that the space between them is truly \outerhsize or \outervsize
213: % (P. A. MacKay, 12 November, 1986)
214: %
215: \def\ewtop{\vrule height\cornerthick depth0pt width\cornerlong}
216: \def\nstop{\vbox
217: {\hrule height\cornerthick depth\cornerlong width\cornerthick}}
218: \def\ewbot{\vrule height0pt depth\cornerthick width\cornerlong}
219: \def\nsbot{\vbox
220: {\hrule height\cornerlong depth\cornerthick width\cornerthick}}
221:
222: % Parse an argument, then pass it to #1. The argument is the rest of
223: % the input line (except we remove a trailing comment). #1 should be a
224: % macro which expects an ordinary undelimited TeX argument.
225: %
226: \def\parsearg#1{%
227: \let\next = #1%
228: \begingroup
229: \obeylines
230: \futurelet\temp\parseargx
231: }
232:
233: % If the next token is an obeyed space (from an @example environment or
234: % the like), remove it and recurse. Otherwise, we're done.
235: \def\parseargx{%
236: % \obeyedspace is defined far below, after the definition of \sepspaces.
237: \ifx\obeyedspace\temp
238: \expandafter\parseargdiscardspace
239: \else
240: \expandafter\parseargline
241: \fi
242: }
243:
244: % Remove a single space (as the delimiter token to the macro call).
245: {\obeyspaces %
246: \gdef\parseargdiscardspace {\futurelet\temp\parseargx}}
247:
248: {\obeylines %
249: \gdef\parseargline#1^^M{%
250: \endgroup % End of the group started in \parsearg.
251: %
252: % First remove any @c comment, then any @comment.
253: % Result of each macro is put in \toks0.
254: \argremovec #1\c\relax %
255: \expandafter\argremovecomment \the\toks0 \comment\relax %
256: %
257: % Call the caller's macro, saved as \next in \parsearg.
258: \expandafter\next\expandafter{\the\toks0}%
259: }%
260: }
261:
262: % Since all \c{,omment} does is throw away the argument, we can let TeX
263: % do that for us. The \relax here is matched by the \relax in the call
264: % in \parseargline; it could be more or less anything, its purpose is
265: % just to delimit the argument to the \c.
266: \def\argremovec#1\c#2\relax{\toks0 = {#1}}
267: \def\argremovecomment#1\comment#2\relax{\toks0 = {#1}}
268:
269: % \argremovec{,omment} might leave us with trailing spaces, though; e.g.,
270: % @end itemize @c foo
271: % will have two active spaces as part of the argument with the
272: % `itemize'. Here we remove all active spaces from #1, and assign the
273: % result to \toks0.
274: %
275: % This loses if there are any *other* active characters besides spaces
276: % in the argument -- _ ^ +, for example -- since they get expanded.
277: % Fortunately, Texinfo does not define any such commands. (If it ever
278: % does, the catcode of the characters in questionwill have to be changed
279: % here.) But this means we cannot call \removeactivespaces as part of
280: % \argremovec{,omment}, since @c uses \parsearg, and thus the argument
281: % that \parsearg gets might well have any character at all in it.
282: %
283: \def\removeactivespaces#1{%
284: \begingroup
285: \ignoreactivespaces
286: \edef\temp{#1}%
287: \global\toks0 = \expandafter{\temp}%
288: \endgroup
289: }
290:
291: % Change the active space to expand to nothing.
292: %
293: \begingroup
294: \obeyspaces
295: \gdef\ignoreactivespaces{\obeyspaces\let =\empty}
296: \endgroup
297:
298:
299: \def\flushcr{\ifx\par\lisppar \def\next##1{}\else \let\next=\relax \fi \next}
300:
301: %% These are used to keep @begin/@end levels from running away
302: %% Call \inENV within environments (after a \begingroup)
303: \newif\ifENV \ENVfalse \def\inENV{\ifENV\relax\else\ENVtrue\fi}
304: \def\ENVcheck{%
305: \ifENV\errmessage{Still within an environment. Type Return to continue.}
306: \endgroup\fi} % This is not perfect, but it should reduce lossage
307:
308: % @begin foo is the same as @foo, for now.
309: \newhelp\EMsimple{Type <Return> to continue.}
310:
311: \outer\def\begin{\parsearg\beginxxx}
312:
313: \def\beginxxx #1{%
314: \expandafter\ifx\csname #1\endcsname\relax
315: {\errhelp=\EMsimple \errmessage{Undefined command @begin #1}}\else
316: \csname #1\endcsname\fi}
317:
318: % @end foo executes the definition of \Efoo.
319: %
320: \def\end{\parsearg\endxxx}
321: \def\endxxx #1{%
322: \removeactivespaces{#1}%
323: \edef\endthing{\the\toks0}%
324: %
325: \expandafter\ifx\csname E\endthing\endcsname\relax
326: \expandafter\ifx\csname \endthing\endcsname\relax
327: % There's no \foo, i.e., no ``environment'' foo.
328: \errhelp = \EMsimple
329: \errmessage{Undefined command `@end \endthing'}%
330: \else
331: \unmatchedenderror\endthing
332: \fi
333: \else
334: % Everything's ok; the right environment has been started.
335: \csname E\endthing\endcsname
336: \fi
337: }
338:
339: % There is an environment #1, but it hasn't been started. Give an error.
340: %
341: \def\unmatchedenderror#1{%
342: \errhelp = \EMsimple
343: \errmessage{This `@end #1' doesn't have a matching `@#1'}%
344: }
345:
346: % Define the control sequence \E#1 to give an unmatched @end error.
347: %
348: \def\defineunmatchedend#1{%
349: \expandafter\def\csname E#1\endcsname{\unmatchedenderror{#1}}%
350: }
351:
352:
353: % Single-spacing is done by various environments (specifically, in
354: % \nonfillstart and \quotations).
355: \newskip\singlespaceskip \singlespaceskip = 12.5pt
356: \def\singlespace{%
357: % Why was this kern here? It messes up equalizing space above and below
358: % environments. --karl, 6may93
359: %{\advance \baselineskip by -\singlespaceskip
360: %\kern \baselineskip}%
361: \setleading \singlespaceskip
362: }
363:
364: %% Simple single-character @ commands
365:
366: % @@ prints an @
367: % Kludge this until the fonts are right (grr).
368: \def\@{{\tt \char '100}}
369:
370: % This is turned off because it was never documented
371: % and you can use @w{...} around a quote to suppress ligatures.
372: %% Define @` and @' to be the same as ` and '
373: %% but suppressing ligatures.
374: %\def\`{{`}}
375: %\def\'{{'}}
376:
377: % Used to generate quoted braces.
378: \def\mylbrace {{\tt \char '173}}
379: \def\myrbrace {{\tt \char '175}}
380: \let\{=\mylbrace
381: \let\}=\myrbrace
382: \begingroup
383: % Definitions to produce actual \{ & \} command in an index.
384: \catcode`\{ = 12 \catcode`\} = 12
385: \catcode`\[ = 1 \catcode`\] = 2
386: \catcode`\@ = 0 \catcode`\\ = 12
387: @gdef@lbracecmd[\{]%
388: @gdef@rbracecmd[\}]%
389: @endgroup
390:
391: % Accents: @, @dotaccent @ringaccent @ubaraccent @udotaccent
392: % Others are defined by plain TeX: @` @' @" @^ @~ @= @v @H.
393: \let\, = \c
394: \let\dotaccent = \.
395: \def\ringaccent#1{{\accent23 #1}}
396: \let\tieaccent = \t
397: \let\ubaraccent = \b
398: \let\udotaccent = \d
399:
400: % Other special characters: @questiondown @exclamdown
401: % Plain TeX defines: @AA @AE @O @OE @L (and lowercase versions) @ss.
402: \def\questiondown{?`}
403: \def\exclamdown{!`}
404:
405: % Dotless i and dotless j, used for accents.
406: \def\imacro{i}
407: \def\jmacro{j}
408: \def\dotless#1{%
409: \def\temp{#1}%
410: \ifx\temp\imacro \ptexi
411: \else\ifx\temp\jmacro \j
412: \else \errmessage{@dotless can be used only with i or j}%
413: \fi\fi
414: }
415:
416: % @: forces normal size whitespace following.
417: \def\:{\spacefactor=1000 }
418:
419: % @* forces a line break.
420: \def\*{\hfil\break\hbox{}\ignorespaces}
421:
422: % @. is an end-of-sentence period.
423: \def\.{.\spacefactor=3000 }
424:
425: % @enddots{} is an end-of-sentence ellipsis.
426: \gdef\enddots{$\mathinner{\ldotp\ldotp\ldotp\ldotp}$\spacefactor=3000}
427:
428: % @! is an end-of-sentence bang.
429: \gdef\!{!\spacefactor=3000 }
430:
431: % @? is an end-of-sentence query.
432: \gdef\?{?\spacefactor=3000 }
433:
434: % @w prevents a word break. Without the \leavevmode, @w at the
435: % beginning of a paragraph, when TeX is still in vertical mode, would
436: % produce a whole line of output instead of starting the paragraph.
437: \def\w#1{\leavevmode\hbox{#1}}
438:
439: % @group ... @end group forces ... to be all on one page, by enclosing
440: % it in a TeX vbox. We use \vtop instead of \vbox to construct the box
441: % to keep its height that of a normal line. According to the rules for
442: % \topskip (p.114 of the TeXbook), the glue inserted is
443: % max (\topskip - \ht (first item), 0). If that height is large,
444: % therefore, no glue is inserted, and the space between the headline and
445: % the text is small, which looks bad.
446: %
447: \def\group{\begingroup
448: \ifnum\catcode13=\active \else
449: \errhelp = \groupinvalidhelp
450: \errmessage{@group invalid in context where filling is enabled}%
451: \fi
452: %
453: % The \vtop we start below produces a box with normal height and large
454: % depth; thus, TeX puts \baselineskip glue before it, and (when the
455: % next line of text is done) \lineskip glue after it. (See p.82 of
456: % the TeXbook.) Thus, space below is not quite equal to space
457: % above. But it's pretty close.
458: \def\Egroup{%
459: \egroup % End the \vtop.
460: \endgroup % End the \group.
461: }%
462: %
463: \vtop\bgroup
464: % We have to put a strut on the last line in case the @group is in
465: % the midst of an example, rather than completely enclosing it.
466: % Otherwise, the interline space between the last line of the group
467: % and the first line afterwards is too small. But we can't put the
468: % strut in \Egroup, since there it would be on a line by itself.
469: % Hence this just inserts a strut at the beginning of each line.
470: \everypar = {\strut}%
471: %
472: % Since we have a strut on every line, we don't need any of TeX's
473: % normal interline spacing.
474: \offinterlineskip
475: %
476: % OK, but now we have to do something about blank
477: % lines in the input in @example-like environments, which normally
478: % just turn into \lisppar, which will insert no space now that we've
479: % turned off the interline space. Simplest is to make them be an
480: % empty paragraph.
481: \ifx\par\lisppar
482: \edef\par{\leavevmode \par}%
483: %
484: % Reset ^^M's definition to new definition of \par.
485: \obeylines
486: \fi
487: %
488: % Do @comment since we are called inside an environment such as
489: % @example, where each end-of-line in the input causes an
490: % end-of-line in the output. We don't want the end-of-line after
491: % the `@group' to put extra space in the output. Since @group
492: % should appear on a line by itself (according to the Texinfo
493: % manual), we don't worry about eating any user text.
494: \comment
495: }
496: %
497: % TeX puts in an \escapechar (i.e., `@') at the beginning of the help
498: % message, so this ends up printing `@group can only ...'.
499: %
500: \newhelp\groupinvalidhelp{%
501: group can only be used in environments such as @example,^^J%
502: where each line of input produces a line of output.}
503:
504: % @need space-in-mils
505: % forces a page break if there is not space-in-mils remaining.
506:
507: \newdimen\mil \mil=0.001in
508:
509: \def\need{\parsearg\needx}
510:
511: % Old definition--didn't work.
512: %\def\needx #1{\par %
513: %% This method tries to make TeX break the page naturally
514: %% if the depth of the box does not fit.
515: %{\baselineskip=0pt%
516: %\vtop to #1\mil{\vfil}\kern -#1\mil\penalty 10000
517: %\prevdepth=-1000pt
518: %}}
519:
520: \def\needx#1{%
521: % Go into vertical mode, so we don't make a big box in the middle of a
522: % paragraph.
523: \par
524: %
525: % Don't add any leading before our big empty box, but allow a page
526: % break, since the best break might be right here.
527: \allowbreak
528: \nointerlineskip
529: \vtop to #1\mil{\vfil}%
530: %
531: % TeX does not even consider page breaks if a penalty added to the
532: % main vertical list is 10000 or more. But in order to see if the
533: % empty box we just added fits on the page, we must make it consider
534: % page breaks. On the other hand, we don't want to actually break the
535: % page after the empty box. So we use a penalty of 9999.
536: %
537: % There is an extremely small chance that TeX will actually break the
538: % page at this \penalty, if there are no other feasible breakpoints in
539: % sight. (If the user is using lots of big @group commands, which
540: % almost-but-not-quite fill up a page, TeX will have a hard time doing
541: % good page breaking, for example.) However, I could not construct an
542: % example where a page broke at this \penalty; if it happens in a real
543: % document, then we can reconsider our strategy.
544: \penalty9999
545: %
546: % Back up by the size of the box, whether we did a page break or not.
547: \kern -#1\mil
548: %
549: % Do not allow a page break right after this kern.
550: \nobreak
551: }
552:
553: % @br forces paragraph break
554:
555: \let\br = \par
556:
557: % @dots{} output some dots
558:
559: \def\dots{$\ldots$}
560:
561: % @page forces the start of a new page
562:
563: \def\page{\par\vfill\supereject}
564:
565: % @exdent text....
566: % outputs text on separate line in roman font, starting at standard page margin
567:
568: % This records the amount of indent in the innermost environment.
569: % That's how much \exdent should take out.
570: \newskip\exdentamount
571:
572: % This defn is used inside fill environments such as @defun.
573: \def\exdent{\parsearg\exdentyyy}
574: \def\exdentyyy #1{{\hfil\break\hbox{\kern -\exdentamount{\rm#1}}\hfil\break}}
575:
576: % This defn is used inside nofill environments such as @example.
577: \def\nofillexdent{\parsearg\nofillexdentyyy}
578: \def\nofillexdentyyy #1{{\advance \leftskip by -\exdentamount
579: \leftline{\hskip\leftskip{\rm#1}}}}
580:
581: % @inmargin{TEXT} puts TEXT in the margin next to the current paragraph.
582:
583: \def\inmargin#1{%
584: \strut\vadjust{\nobreak\kern-\strutdepth
585: \vtop to \strutdepth{\baselineskip\strutdepth\vss
586: \llap{\rightskip=\inmarginspacing \vbox{\noindent #1}}\null}}}
587: \newskip\inmarginspacing \inmarginspacing=1cm
588: \def\strutdepth{\dp\strutbox}
589:
590: %\hbox{{\rm#1}}\hfil\break}}
591:
592: % @include file insert text of that file as input.
593: % Allow normal characters that we make active in the argument (a file name).
594: \def\include{\begingroup
595: \catcode`\\=12
596: \catcode`~=12
597: \catcode`^=12
598: \catcode`_=12
599: \catcode`|=12
600: \catcode`<=12
601: \catcode`>=12
602: \catcode`+=12
603: \parsearg\includezzz}
604: % Restore active chars for included file.
605: \def\includezzz#1{\endgroup\begingroup
606: % Read the included file in a group so nested @include's work.
607: \def\thisfile{#1}%
608: \input\thisfile
609: \endgroup}
610:
611: \def\thisfile{}
612:
613: % @center line outputs that line, centered
614:
615: \def\center{\parsearg\centerzzz}
616: \def\centerzzz #1{{\advance\hsize by -\leftskip
617: \advance\hsize by -\rightskip
618: \centerline{#1}}}
619:
620: % @sp n outputs n lines of vertical space
621:
622: \def\sp{\parsearg\spxxx}
623: \def\spxxx #1{\vskip #1\baselineskip}
624:
625: % @comment ...line which is ignored...
626: % @c is the same as @comment
627: % @ignore ... @end ignore is another way to write a comment
628:
629: \def\comment{\catcode 64=\other \catcode 123=\other \catcode 125=\other%
630: \parsearg \commentxxx}
631:
632: \def\commentxxx #1{\catcode 64=0 \catcode 123=1 \catcode 125=2 }
633:
634: \let\c=\comment
635:
636: % @paragraphindent is defined for the Info formatting commands only.
637: \let\paragraphindent=\comment
638:
639: % Prevent errors for section commands.
640: % Used in @ignore and in failing conditionals.
641: \def\ignoresections{%
642: \let\chapter=\relax
643: \let\unnumbered=\relax
644: \let\top=\relax
645: \let\unnumberedsec=\relax
646: \let\unnumberedsection=\relax
647: \let\unnumberedsubsec=\relax
648: \let\unnumberedsubsection=\relax
649: \let\unnumberedsubsubsec=\relax
650: \let\unnumberedsubsubsection=\relax
651: \let\section=\relax
652: \let\subsec=\relax
653: \let\subsubsec=\relax
654: \let\subsection=\relax
655: \let\subsubsection=\relax
656: \let\appendix=\relax
657: \let\appendixsec=\relax
658: \let\appendixsection=\relax
659: \let\appendixsubsec=\relax
660: \let\appendixsubsection=\relax
661: \let\appendixsubsubsec=\relax
662: \let\appendixsubsubsection=\relax
663: \let\contents=\relax
664: \let\smallbook=\relax
665: \let\titlepage=\relax
666: }
667:
668: % Used in nested conditionals, where we have to parse the Texinfo source
669: % and so want to turn off most commands, in case they are used
670: % incorrectly.
671: %
672: \def\ignoremorecommands{%
673: \let\defcodeindex = \relax
674: \let\defcv = \relax
675: \let\deffn = \relax
676: \let\deffnx = \relax
677: \let\defindex = \relax
678: \let\defivar = \relax
679: \let\defmac = \relax
680: \let\defmethod = \relax
681: \let\defop = \relax
682: \let\defopt = \relax
683: \let\defspec = \relax
684: \let\deftp = \relax
685: \let\deftypefn = \relax
686: \let\deftypefun = \relax
687: \let\deftypevar = \relax
688: \let\deftypevr = \relax
689: \let\defun = \relax
690: \let\defvar = \relax
691: \let\defvr = \relax
692: \let\ref = \relax
693: \let\xref = \relax
694: \let\printindex = \relax
695: \let\pxref = \relax
696: \let\settitle = \relax
697: \let\setchapternewpage = \relax
698: \let\setchapterstyle = \relax
699: \let\everyheading = \relax
700: \let\evenheading = \relax
701: \let\oddheading = \relax
702: \let\everyfooting = \relax
703: \let\evenfooting = \relax
704: \let\oddfooting = \relax
705: \let\headings = \relax
706: \let\include = \relax
707: \let\lowersections = \relax
708: \let\down = \relax
709: \let\raisesections = \relax
710: \let\up = \relax
711: \let\set = \relax
712: \let\clear = \relax
713: \let\item = \relax
714: }
715:
716: % Ignore @ignore ... @end ignore.
717: %
718: \def\ignore{\doignore{ignore}}
719:
720: % Also ignore @ifinfo, @ifhtml, @html, @menu, and @direntry text.
721: %
722: \def\ifinfo{\doignore{ifinfo}}
723: \def\ifhtml{\doignore{ifhtml}}
724: \def\html{\doignore{html}}
725: \def\menu{\doignore{menu}}
726: \def\direntry{\doignore{direntry}}
727:
728: % Also ignore @macro ... @end macro. The user must run texi2dvi,
729: % which runs makeinfo to do macro expansion. Ignore @unmacro, too.
730: \def\macro{\doignore{macro}}
731: \let\unmacro = \comment
732:
733:
734: % @dircategory CATEGORY -- specify a category of the dir file
735: % which this file should belong to. Ignore this in TeX.
736: \let\dircategory = \comment
737:
738: % Ignore text until a line `@end #1'.
739: %
740: \def\doignore#1{\begingroup
741: % Don't complain about control sequences we have declared \outer.
742: \ignoresections
743: %
744: % Define a command to swallow text until we reach `@end #1'.
745: \long\def\doignoretext##1\end #1{\enddoignore}%
746: %
747: % Make sure that spaces turn into tokens that match what \doignoretext wants.
748: \catcode32 = 10
749: %
750: % And now expand that command.
751: \doignoretext
752: }
753:
754: % What we do to finish off ignored text.
755: %
756: \def\enddoignore{\endgroup\ignorespaces}%
757:
758: \newif\ifwarnedobs\warnedobsfalse
759: \def\obstexwarn{%
760: \ifwarnedobs\relax\else
761: % We need to warn folks that they may have trouble with TeX 3.0.
762: % This uses \immediate\write16 rather than \message to get newlines.
763: \immediate\write16{}
764: \immediate\write16{***WARNING*** for users of Unix TeX 3.0!}
765: \immediate\write16{This manual trips a bug in TeX version 3.0 (tex hangs).}
766: \immediate\write16{If you are running another version of TeX, relax.}
767: \immediate\write16{If you are running Unix TeX 3.0, kill this TeX process.}
768: \immediate\write16{ Then upgrade your TeX installation if you can.}
769: \immediate\write16{ (See ftp://ftp.gnu.ai.mit.edu/pub/gnu/TeX.README.)}
770: \immediate\write16{If you are stuck with version 3.0, run the}
771: \immediate\write16{ script ``tex3patch'' from the Texinfo distribution}
772: \immediate\write16{ to use a workaround.}
773: \immediate\write16{}
774: \global\warnedobstrue
775: \fi
776: }
777:
778: % **In TeX 3.0, setting text in \nullfont hangs tex. For a
779: % workaround (which requires the file ``dummy.tfm'' to be installed),
780: % uncomment the following line:
781: %%%%%\font\nullfont=dummy\let\obstexwarn=\relax
782:
783: % Ignore text, except that we keep track of conditional commands for
784: % purposes of nesting, up to an `@end #1' command.
785: %
786: \def\nestedignore#1{%
787: \obstexwarn
788: % We must actually expand the ignored text to look for the @end
789: % command, so that nested ignore constructs work. Thus, we put the
790: % text into a \vbox and then do nothing with the result. To minimize
791: % the change of memory overflow, we follow the approach outlined on
792: % page 401 of the TeXbook: make the current font be a dummy font.
793: %
794: \setbox0 = \vbox\bgroup
795: % Don't complain about control sequences we have declared \outer.
796: \ignoresections
797: %
798: % Define `@end #1' to end the box, which will in turn undefine the
799: % @end command again.
800: \expandafter\def\csname E#1\endcsname{\egroup\ignorespaces}%
801: %
802: % We are going to be parsing Texinfo commands. Most cause no
803: % trouble when they are used incorrectly, but some commands do
804: % complicated argument parsing or otherwise get confused, so we
805: % undefine them.
806: %
807: % We can't do anything about stray @-signs, unfortunately;
808: % they'll produce `undefined control sequence' errors.
809: \ignoremorecommands
810: %
811: % Set the current font to be \nullfont, a TeX primitive, and define
812: % all the font commands to also use \nullfont. We don't use
813: % dummy.tfm, as suggested in the TeXbook, because not all sites
814: % might have that installed. Therefore, math mode will still
815: % produce output, but that should be an extremely small amount of
816: % stuff compared to the main input.
817: %
818: \nullfont
819: \let\tenrm = \nullfont \let\tenit = \nullfont \let\tensl = \nullfont
820: \let\tenbf = \nullfont \let\tentt = \nullfont \let\smallcaps = \nullfont
821: \let\tensf = \nullfont
822: % Similarly for index fonts (mostly for their use in
823: % smallexample)
824: \let\indrm = \nullfont \let\indit = \nullfont \let\indsl = \nullfont
825: \let\indbf = \nullfont \let\indtt = \nullfont \let\indsc = \nullfont
826: \let\indsf = \nullfont
827: %
828: % Don't complain when characters are missing from the fonts.
829: \tracinglostchars = 0
830: %
831: % Don't bother to do space factor calculations.
832: \frenchspacing
833: %
834: % Don't report underfull hboxes.
835: \hbadness = 10000
836: %
837: % Do minimal line-breaking.
838: \pretolerance = 10000
839: %
840: % Do not execute instructions in @tex
841: \def\tex{\doignore{tex}}
842: }
843:
844: % @set VAR sets the variable VAR to an empty value.
845: % @set VAR REST-OF-LINE sets VAR to the value REST-OF-LINE.
846: %
847: % Since we want to separate VAR from REST-OF-LINE (which might be
848: % empty), we can't just use \parsearg; we have to insert a space of our
849: % own to delimit the rest of the line, and then take it out again if we
850: % didn't need it. Make sure the catcode of space is correct to avoid
851: % losing inside @example, for instance.
852: %
853: \def\set{\begingroup\catcode` =10 \parsearg\setxxx}
854: \def\setxxx#1{\setyyy#1 \endsetyyy}
855: \def\setyyy#1 #2\endsetyyy{%
856: \def\temp{#2}%
857: \ifx\temp\empty \global\expandafter\let\csname SET#1\endcsname = \empty
858: \else \setzzz{#1}#2\endsetzzz % Remove the trailing space \setxxx inserted.
859: \fi
860: \endgroup
861: }
862: % Can't use \xdef to pre-expand #2 and save some time, since \temp or
863: % \next or other control sequences that we've defined might get us into
864: % an infinite loop. Consider `@set foo @cite{bar}'.
865: \def\setzzz#1#2 \endsetzzz{\expandafter\gdef\csname SET#1\endcsname{#2}}
866:
867: % @clear VAR clears (i.e., unsets) the variable VAR.
868: %
869: \def\clear{\parsearg\clearxxx}
870: \def\clearxxx#1{\global\expandafter\let\csname SET#1\endcsname=\relax}
871:
872: % @value{foo} gets the text saved in variable foo.
873: %
874: \def\value#1{\expandafter
875: \ifx\csname SET#1\endcsname\relax
876: {\{No value for ``#1''\}}
877: \else \csname SET#1\endcsname \fi}
878:
879: % @ifset VAR ... @end ifset reads the `...' iff VAR has been defined
880: % with @set.
881: %
882: \def\ifset{\parsearg\ifsetxxx}
883: \def\ifsetxxx #1{%
884: \expandafter\ifx\csname SET#1\endcsname\relax
885: \expandafter\ifsetfail
886: \else
887: \expandafter\ifsetsucceed
888: \fi
889: }
890: \def\ifsetsucceed{\conditionalsucceed{ifset}}
891: \def\ifsetfail{\nestedignore{ifset}}
892: \defineunmatchedend{ifset}
893:
894: % @ifclear VAR ... @end ifclear reads the `...' iff VAR has never been
895: % defined with @set, or has been undefined with @clear.
896: %
897: \def\ifclear{\parsearg\ifclearxxx}
898: \def\ifclearxxx #1{%
899: \expandafter\ifx\csname SET#1\endcsname\relax
900: \expandafter\ifclearsucceed
901: \else
902: \expandafter\ifclearfail
903: \fi
904: }
905: \def\ifclearsucceed{\conditionalsucceed{ifclear}}
906: \def\ifclearfail{\nestedignore{ifclear}}
907: \defineunmatchedend{ifclear}
908:
909: % @iftex always succeeds; we read the text following, through @end
910: % iftex). But `@end iftex' should be valid only after an @iftex.
911: %
912: \def\iftex{\conditionalsucceed{iftex}}
913: \defineunmatchedend{iftex}
914:
915: % We can't just want to start a group at @iftex (for example) and end it
916: % at @end iftex, since then @set commands inside the conditional have no
917: % effect (they'd get reverted at the end of the group). So we must
918: % define \Eiftex to redefine itself to be its previous value. (We can't
919: % just define it to fail again with an ``unmatched end'' error, since
920: % the @ifset might be nested.)
921: %
922: \def\conditionalsucceed#1{%
923: \edef\temp{%
924: % Remember the current value of \E#1.
925: \let\nece{prevE#1} = \nece{E#1}%
926: %
927: % At the `@end #1', redefine \E#1 to be its previous value.
928: \def\nece{E#1}{\let\nece{E#1} = \nece{prevE#1}}%
929: }%
930: \temp
931: }
932:
933: % We need to expand lots of \csname's, but we don't want to expand the
934: % control sequences after we've constructed them.
935: %
936: \def\nece#1{\expandafter\noexpand\csname#1\endcsname}
937:
938: % @asis just yields its argument. Used with @table, for example.
939: %
940: \def\asis#1{#1}
941:
942: % @math means output in math mode.
943: % We don't use $'s directly in the definition of \math because control
944: % sequences like \math are expanded when the toc file is written. Then,
945: % we read the toc file back, the $'s will be normal characters (as they
946: % should be, according to the definition of Texinfo). So we must use a
947: % control sequence to switch into and out of math mode.
948: %
949: % This isn't quite enough for @math to work properly in indices, but it
950: % seems unlikely it will ever be needed there.
951: %
952: \let\implicitmath = $
953: \def\math#1{\implicitmath #1\implicitmath}
954:
955: % @bullet and @minus need the same treatment as @math, just above.
956: \def\bullet{\implicitmath\ptexbullet\implicitmath}
957: \def\minus{\implicitmath-\implicitmath}
958:
959: \def\node{\ENVcheck\parsearg\nodezzz}
960: \def\nodezzz#1{\nodexxx [#1,]}
961: \def\nodexxx[#1,#2]{\gdef\lastnode{#1}}
962: \let\nwnode=\node
963: \let\lastnode=\relax
964:
965: \def\donoderef{\ifx\lastnode\relax\else
966: \expandafter\expandafter\expandafter\setref{\lastnode}\fi
967: \global\let\lastnode=\relax}
968:
969: \def\unnumbnoderef{\ifx\lastnode\relax\else
970: \expandafter\expandafter\expandafter\unnumbsetref{\lastnode}\fi
971: \global\let\lastnode=\relax}
972:
973: \def\appendixnoderef{\ifx\lastnode\relax\else
974: \expandafter\expandafter\expandafter\appendixsetref{\lastnode}\fi
975: \global\let\lastnode=\relax}
976:
977: % @refill is a no-op.
978: \let\refill=\relax
979:
980: % @setfilename is done at the beginning of every texinfo file.
981: % So open here the files we need to have open while reading the input.
982: % This makes it possible to make a .fmt file for texinfo.
983: \def\setfilename{%
984: \readauxfile
985: \opencontents
986: \openindices
987: \fixbackslash % Turn off hack to swallow `\input texinfo'.
988: \global\let\setfilename=\comment % Ignore extra @setfilename cmds.
989: \comment % Ignore the actual filename.
990: }
991:
992: % @bye.
993: \outer\def\bye{\pagealignmacro\tracingstats=1\ptexend}
994:
995: % \def\macro#1{\begingroup\ignoresections\catcode`\#=6\def\macrotemp{#1}\parsearg\macroxxx}
996: % \def\macroxxx#1#2 \end macro{%
997: % \expandafter\gdef\macrotemp#1{#2}%
998: % \endgroup}
999:
1000: %\def\linemacro#1{\begingroup\ignoresections\catcode`\#=6\def\macrotemp{#1}\parsearg\linemacroxxx}
1001: %\def\linemacroxxx#1#2 \end linemacro{%
1002: %\let\parsearg=\relax
1003: %\edef\macrotempx{\csname M\butfirst\expandafter\string\macrotemp\endcsname}%
1004: %\expandafter\xdef\macrotemp{\parsearg\macrotempx}%
1005: %\expandafter\gdef\macrotempx#1{#2}%
1006: %\endgroup}
1007:
1008: %\def\butfirst#1{}
1009:
1010:
1011: \message{fonts,}
1012:
1013: % Font-change commands.
1014:
1015: % Texinfo supports the sans serif font style, which plain TeX does not.
1016: % So we set up a \sf analogous to plain's \rm, etc.
1017: \newfam\sffam
1018: \def\sf{\fam=\sffam \tensf}
1019: \let\li = \sf % Sometimes we call it \li, not \sf.
1020:
1021: % We don't need math for this one.
1022: \def\ttsl{\tenttsl}
1023:
1024: %% Try out Computer Modern fonts at \magstephalf
1025: \let\mainmagstep=\magstephalf
1026:
1027: % Set the font macro #1 to the font named #2, adding on the
1028: % specified font prefix (normally `cm').
1029: % #3 is the font's design size, #4 is a scale factor
1030: \def\setfont#1#2#3#4{\font#1=\fontprefix#2#3 scaled #4}
1031:
1032: % Use cm as the default font prefix.
1033: % To specify the font prefix, you must define \fontprefix
1034: % before you read in texinfo.tex.
1035: \ifx\fontprefix\undefined
1036: \def\fontprefix{cm}
1037: \fi
1038: % Support font families that don't use the same naming scheme as CM.
1039: \def\rmshape{r}
1040: \def\rmbshape{bx} %where the normal face is bold
1041: \def\bfshape{b}
1042: \def\bxshape{bx}
1043: \def\ttshape{tt}
1044: \def\ttbshape{tt}
1045: \def\ttslshape{sltt}
1046: \def\itshape{ti}
1047: \def\itbshape{bxti}
1048: \def\slshape{sl}
1049: \def\slbshape{bxsl}
1050: \def\sfshape{ss}
1051: \def\sfbshape{ss}
1052: \def\scshape{csc}
1053: \def\scbshape{csc}
1054:
1055: \ifx\bigger\relax
1056: \let\mainmagstep=\magstep1
1057: \setfont\textrm\rmshape{12}{1000}
1058: \setfont\texttt\ttshape{12}{1000}
1059: \else
1060: \setfont\textrm\rmshape{10}{\mainmagstep}
1061: \setfont\texttt\ttshape{10}{\mainmagstep}
1062: \fi
1063: % Instead of cmb10, you many want to use cmbx10.
1064: % cmbx10 is a prettier font on its own, but cmb10
1065: % looks better when embedded in a line with cmr10.
1066: \setfont\textbf\bfshape{10}{\mainmagstep}
1067: \setfont\textit\itshape{10}{\mainmagstep}
1068: \setfont\textsl\slshape{10}{\mainmagstep}
1069: \setfont\textsf\sfshape{10}{\mainmagstep}
1070: \setfont\textsc\scshape{10}{\mainmagstep}
1071: \setfont\textttsl\ttslshape{10}{\mainmagstep}
1072: \font\texti=cmmi10 scaled \mainmagstep
1073: \font\textsy=cmsy10 scaled \mainmagstep
1074:
1075: % A few fonts for @defun, etc.
1076: \setfont\defbf\bxshape{10}{\magstep1} %was 1314
1077: \setfont\deftt\ttshape{10}{\magstep1}
1078: \def\df{\let\tentt=\deftt \let\tenbf = \defbf \bf}
1079:
1080: % Fonts for indices and small examples (9pt).
1081: % We actually use the slanted font rather than the italic,
1082: % because texinfo normally uses the slanted fonts for that.
1083: % Do not make many font distinctions in general in the index, since they
1084: % aren't very useful.
1085: \setfont\ninett\ttshape{9}{1000}
1086: \setfont\indrm\rmshape{9}{1000}
1087: \setfont\indit\slshape{9}{1000}
1088: \let\indsl=\indit
1089: \let\indtt=\ninett
1090: \let\indttsl=\ninett
1091: \let\indsf=\indrm
1092: \let\indbf=\indrm
1093: \setfont\indsc\scshape{10}{900}
1094: \font\indi=cmmi9
1095: \font\indsy=cmsy9
1096:
1097: % Chapter (and unnumbered) fonts (17.28pt).
1098: \setfont\chaprm\rmbshape{12}{\magstep2}
1099: \setfont\chapit\itbshape{10}{\magstep3}
1100: \setfont\chapsl\slbshape{10}{\magstep3}
1101: \setfont\chaptt\ttbshape{12}{\magstep2}
1102: \setfont\chapttsl\ttslshape{10}{\magstep3}
1103: \setfont\chapsf\sfbshape{12}{\magstep2}
1104: \let\chapbf=\chaprm
1105: \setfont\chapsc\scbshape{10}{\magstep3}
1106: \font\chapi=cmmi12 scaled \magstep2
1107: \font\chapsy=cmsy10 scaled \magstep3
1108:
1109: % Section fonts (14.4pt).
1110: \setfont\secrm\rmbshape{12}{\magstep1}
1111: \setfont\secit\itbshape{10}{\magstep2}
1112: \setfont\secsl\slbshape{10}{\magstep2}
1113: \setfont\sectt\ttbshape{12}{\magstep1}
1114: \setfont\secttsl\ttslshape{10}{\magstep2}
1115: \setfont\secsf\sfbshape{12}{\magstep1}
1116: \let\secbf\secrm
1117: \setfont\secsc\scbshape{10}{\magstep2}
1118: \font\seci=cmmi12 scaled \magstep1
1119: \font\secsy=cmsy10 scaled \magstep2
1120:
1121: % \setfont\ssecrm\bxshape{10}{\magstep1} % This size an font looked bad.
1122: % \setfont\ssecit\itshape{10}{\magstep1} % The letters were too crowded.
1123: % \setfont\ssecsl\slshape{10}{\magstep1}
1124: % \setfont\ssectt\ttshape{10}{\magstep1}
1125: % \setfont\ssecsf\sfshape{10}{\magstep1}
1126:
1127: %\setfont\ssecrm\bfshape{10}{1315} % Note the use of cmb rather than cmbx.
1128: %\setfont\ssecit\itshape{10}{1315} % Also, the size is a little larger than
1129: %\setfont\ssecsl\slshape{10}{1315} % being scaled magstep1.
1130: %\setfont\ssectt\ttshape{10}{1315}
1131: %\setfont\ssecsf\sfshape{10}{1315}
1132:
1133: %\let\ssecbf=\ssecrm
1134:
1135: % Subsection fonts (13.15pt).
1136: \setfont\ssecrm\rmbshape{12}{\magstephalf}
1137: \setfont\ssecit\itbshape{10}{1315}
1138: \setfont\ssecsl\slbshape{10}{1315}
1139: \setfont\ssectt\ttbshape{12}{\magstephalf}
1140: \setfont\ssecttsl\ttslshape{10}{\magstep1}
1141: \setfont\ssecsf\sfbshape{12}{\magstephalf}
1142: \let\ssecbf\ssecrm
1143: \setfont\ssecsc\scbshape{10}{\magstep1}
1144: \font\sseci=cmmi12 scaled \magstephalf
1145: \font\ssecsy=cmsy10 scaled \magstep1
1146: % The smallcaps and symbol fonts should actually be scaled \magstep1.5,
1147: % but that is not a standard magnification.
1148:
1149: % Fonts for title page:
1150: \setfont\titlerm\rmbshape{12}{\magstep3}
1151: \let\authorrm = \secrm
1152:
1153: % In order for the font changes to affect most math symbols and letters,
1154: % we have to define the \textfont of the standard families. Since
1155: % texinfo doesn't allow for producing subscripts and superscripts, we
1156: % don't bother to reset \scriptfont and \scriptscriptfont (which would
1157: % also require loading a lot more fonts).
1158: %
1159: \def\resetmathfonts{%
1160: \textfont0 = \tenrm \textfont1 = \teni \textfont2 = \tensy
1161: \textfont\itfam = \tenit \textfont\slfam = \tensl \textfont\bffam = \tenbf
1162: \textfont\ttfam = \tentt \textfont\sffam = \tensf
1163: }
1164:
1165:
1166: % The font-changing commands redefine the meanings of \tenSTYLE, instead
1167: % of just \STYLE. We do this so that font changes will continue to work
1168: % in math mode, where it is the current \fam that is relevant in most
1169: % cases, not the current font. Plain TeX does \def\bf{\fam=\bffam
1170: % \tenbf}, for example. By redefining \tenbf, we obviate the need to
1171: % redefine \bf itself.
1172: \def\textfonts{%
1173: \let\tenrm=\textrm \let\tenit=\textit \let\tensl=\textsl
1174: \let\tenbf=\textbf \let\tentt=\texttt \let\smallcaps=\textsc
1175: \let\tensf=\textsf \let\teni=\texti \let\tensy=\textsy \let\tenttsl=\textttsl
1176: \resetmathfonts}
1177: \def\chapfonts{%
1178: \let\tenrm=\chaprm \let\tenit=\chapit \let\tensl=\chapsl
1179: \let\tenbf=\chapbf \let\tentt=\chaptt \let\smallcaps=\chapsc
1180: \let\tensf=\chapsf \let\teni=\chapi \let\tensy=\chapsy \let\tenttsl=\chapttsl
1181: \resetmathfonts \setleading{19pt}}
1182: \def\secfonts{%
1183: \let\tenrm=\secrm \let\tenit=\secit \let\tensl=\secsl
1184: \let\tenbf=\secbf \let\tentt=\sectt \let\smallcaps=\secsc
1185: \let\tensf=\secsf \let\teni=\seci \let\tensy=\secsy \let\tenttsl=\secttsl
1186: \resetmathfonts \setleading{16pt}}
1187: \def\subsecfonts{%
1188: \let\tenrm=\ssecrm \let\tenit=\ssecit \let\tensl=\ssecsl
1189: \let\tenbf=\ssecbf \let\tentt=\ssectt \let\smallcaps=\ssecsc
1190: \let\tensf=\ssecsf \let\teni=\sseci \let\tensy=\ssecsy \let\tenttsl=\ssecttsl
1191: \resetmathfonts \setleading{15pt}}
1192: \let\subsubsecfonts = \subsecfonts % Maybe make sssec fonts scaled magstephalf?
1193: \def\indexfonts{%
1194: \let\tenrm=\indrm \let\tenit=\indit \let\tensl=\indsl
1195: \let\tenbf=\indbf \let\tentt=\indtt \let\smallcaps=\indsc
1196: \let\tensf=\indsf \let\teni=\indi \let\tensy=\indsy \let\tenttsl=\indttsl
1197: \resetmathfonts \setleading{12pt}}
1198:
1199: % Set up the default fonts, so we can use them for creating boxes.
1200: %
1201: \textfonts
1202:
1203: % Count depth in font-changes, for error checks
1204: \newcount\fontdepth \fontdepth=0
1205:
1206: % Fonts for short table of contents.
1207: \setfont\shortcontrm\rmshape{12}{1000}
1208: \setfont\shortcontbf\bxshape{12}{1000}
1209: \setfont\shortcontsl\slshape{12}{1000}
1210:
1211: %% Add scribe-like font environments, plus @l for inline lisp (usually sans
1212: %% serif) and @ii for TeX italic
1213:
1214: % \smartitalic{ARG} outputs arg in italics, followed by an italic correction
1215: % unless the following character is such as not to need one.
1216: \def\smartitalicx{\ifx\next,\else\ifx\next-\else\ifx\next.\else\/\fi\fi\fi}
1217: \def\smartitalic#1{{\sl #1}\futurelet\next\smartitalicx}
1218:
1219: \let\i=\smartitalic
1220: \let\var=\smartitalic
1221: \let\dfn=\smartitalic
1222: \let\emph=\smartitalic
1223: \let\cite=\smartitalic
1224:
1225: \def\b#1{{\bf #1}}
1226: \let\strong=\b
1227:
1228: % We can't just use \exhyphenpenalty, because that only has effect at
1229: % the end of a paragraph. Restore normal hyphenation at the end of the
1230: % group within which \nohyphenation is presumably called.
1231: %
1232: \def\nohyphenation{\hyphenchar\font = -1 \aftergroup\restorehyphenation}
1233: \def\restorehyphenation{\hyphenchar\font = `- }
1234:
1235: \def\t#1{%
1236: {\tt \rawbackslash \frenchspacing #1}%
1237: \null
1238: }
1239: \let\ttfont=\t
1240: \def\samp #1{`\tclose{#1}'\null}
1241: \setfont\smallrm\rmshape{8}{1000}
1242: \font\smallsy=cmsy9
1243: \def\key#1{{\smallrm\textfont2=\smallsy \leavevmode\hbox{%
1244: \raise0.4pt\hbox{$\langle$}\kern-.08em\vtop{%
1245: \vbox{\hrule\kern-0.4pt
1246: \hbox{\raise0.4pt\hbox{\vphantom{$\langle$}}#1}}%
1247: \kern-0.4pt\hrule}%
1248: \kern-.06em\raise0.4pt\hbox{$\rangle$}}}}
1249: % The old definition, with no lozenge:
1250: %\def\key #1{{\ttsl \nohyphenation \uppercase{#1}}\null}
1251: \def\ctrl #1{{\tt \rawbackslash \hat}#1}
1252:
1253: \let\file=\samp
1254: \let\url=\samp % perhaps include a hypertex \special eventually
1255: \def\email#1{$\langle${\tt #1}$\rangle$}
1256:
1257: % @code is a modification of @t,
1258: % which makes spaces the same size as normal in the surrounding text.
1259: \def\tclose#1{%
1260: {%
1261: % Change normal interword space to be same as for the current font.
1262: \spaceskip = \fontdimen2\font
1263: %
1264: % Switch to typewriter.
1265: \tt
1266: %
1267: % But `\ ' produces the large typewriter interword space.
1268: \def\ {{\spaceskip = 0pt{} }}%
1269: %
1270: % Turn off hyphenation.
1271: \nohyphenation
1272: %
1273: \rawbackslash
1274: \frenchspacing
1275: #1%
1276: }%
1277: \null
1278: }
1279:
1280: % We *must* turn on hyphenation at `-' and `_' in \code.
1281: % Otherwise, it is too hard to avoid overfull hboxes
1282: % in the Emacs manual, the Library manual, etc.
1283:
1284: % Unfortunately, TeX uses one parameter (\hyphenchar) to control
1285: % both hyphenation at - and hyphenation within words.
1286: % We must therefore turn them both off (\tclose does that)
1287: % and arrange explicitly to hyphenate at a dash.
1288: % -- rms.
1289: {
1290: \catcode`\-=\active
1291: \catcode`\_=\active
1292: \global\def\code{\begingroup \catcode`\-=\active \let-\codedash \catcode`\_=\active \let_\codeunder \codex}
1293: % The following is used by \doprintindex to insure that long function names
1294: % wrap around. It is necessary for - and _ to be active before the index is
1295: % read from the file, as \entry parses the arguments long before \code is
1296: % ever called. -- mycroft
1297: \global\def\indexbreaks{\catcode`\-=\active \let-\realdash \catcode`\_=\active \let_\realunder}
1298: }
1299:
1300: \def\realdash{-}
1301: \def\realunder{_}
1302: \def\codedash{-\discretionary{}{}{}}
1303: \def\codeunder{\normalunderscore\discretionary{}{}{}}
1304: \def\codex #1{\tclose{#1}\endgroup}
1305:
1306: %\let\exp=\tclose %Was temporary
1307:
1308: % @kbd is like @code, except that if the argument is just one @key command,
1309: % then @kbd has no effect.
1310: %
1311: \def\xkey{\key}
1312: \def\kbdfoo#1#2#3\par{\def\one{#1}\def\three{#3}\def\threex{??}%
1313: \ifx\one\xkey\ifx\threex\three \key{#2}%
1314: \else{\tclose{\ttsl\look}}\fi
1315: \else{\tclose{\ttsl\look}}\fi}
1316:
1317: % Check if we are currently using a typewriter font. Since all the
1318: % Computer Modern typewriter fonts have zero interword stretch (and
1319: % shrink), and it is reasonable to expect all typewriter fonts to have
1320: % this property, we can check that font parameter.
1321: %
1322: \def\ifmonospace{\ifdim\fontdimen3\font=0pt }
1323:
1324: % Typeset a dimension, e.g., `in' or `pt'. The only reason for the
1325: % argument is to make the input look right: @dmn{pt} instead of
1326: % @dmn{}pt.
1327: %
1328: \def\dmn#1{\thinspace #1}
1329:
1330: \def\kbd#1{\def\look{#1}\expandafter\kbdfoo\look??\par}
1331:
1332: % @l was never documented to mean ``switch to the Lisp font'',
1333: % and it is not used as such in any manual I can find. We need it for
1334: % Polish suppressed-l. --karl, 22sep96.
1335: %\def\l#1{{\li #1}\null}
1336:
1337: \def\r#1{{\rm #1}} % roman font
1338: % Use of \lowercase was suggested.
1339: \def\sc#1{{\smallcaps#1}} % smallcaps font
1340: \def\ii#1{{\it #1}} % italic font
1341:
1342: % @pounds{} is a sterling sign.
1343: \def\pounds{{\it\$}}
1344:
1345:
1346: \message{page headings,}
1347:
1348: \newskip\titlepagetopglue \titlepagetopglue = 1.5in
1349: \newskip\titlepagebottomglue \titlepagebottomglue = 2pc
1350:
1351: % First the title page. Must do @settitle before @titlepage.
1352: \def\titlefont#1{{\titlerm #1}}
1353:
1354: \newif\ifseenauthor
1355: \newif\iffinishedtitlepage
1356:
1357: \def\shorttitlepage{\parsearg\shorttitlepagezzz}
1358: \def\shorttitlepagezzz #1{\begingroup\hbox{}\vskip 1.5in \chaprm \centerline{#1}%
1359: \endgroup\page\hbox{}\page}
1360:
1361: \def\titlepage{\begingroup \parindent=0pt \textfonts
1362: \let\subtitlerm=\tenrm
1363: % I deinstalled the following change because \cmr12 is undefined.
1364: % This change was not in the ChangeLog anyway. --rms.
1365: % \let\subtitlerm=\cmr12
1366: \def\subtitlefont{\subtitlerm \normalbaselineskip = 13pt \normalbaselines}%
1367: %
1368: \def\authorfont{\authorrm \normalbaselineskip = 16pt \normalbaselines}%
1369: %
1370: % Leave some space at the very top of the page.
1371: \vglue\titlepagetopglue
1372: %
1373: % Now you can print the title using @title.
1374: \def\title{\parsearg\titlezzz}%
1375: \def\titlezzz##1{\leftline{\titlefont{##1}}
1376: % print a rule at the page bottom also.
1377: \finishedtitlepagefalse
1378: \vskip4pt \hrule height 4pt width \hsize \vskip4pt}%
1379: % No rule at page bottom unless we print one at the top with @title.
1380: \finishedtitlepagetrue
1381: %
1382: % Now you can put text using @subtitle.
1383: \def\subtitle{\parsearg\subtitlezzz}%
1384: \def\subtitlezzz##1{{\subtitlefont \rightline{##1}}}%
1385: %
1386: % @author should come last, but may come many times.
1387: \def\author{\parsearg\authorzzz}%
1388: \def\authorzzz##1{\ifseenauthor\else\vskip 0pt plus 1filll\seenauthortrue\fi
1389: {\authorfont \leftline{##1}}}%
1390: %
1391: % Most title ``pages'' are actually two pages long, with space
1392: % at the top of the second. We don't want the ragged left on the second.
1393: \let\oldpage = \page
1394: \def\page{%
1395: \iffinishedtitlepage\else
1396: \finishtitlepage
1397: \fi
1398: \oldpage
1399: \let\page = \oldpage
1400: \hbox{}}%
1401: % \def\page{\oldpage \hbox{}}
1402: }
1403:
1404: \def\Etitlepage{%
1405: \iffinishedtitlepage\else
1406: \finishtitlepage
1407: \fi
1408: % It is important to do the page break before ending the group,
1409: % because the headline and footline are only empty inside the group.
1410: % If we use the new definition of \page, we always get a blank page
1411: % after the title page, which we certainly don't want.
1412: \oldpage
1413: \endgroup
1414: \HEADINGSon
1415: }
1416:
1417: \def\finishtitlepage{%
1418: \vskip4pt \hrule height 2pt width \hsize
1419: \vskip\titlepagebottomglue
1420: \finishedtitlepagetrue
1421: }
1422:
1423: %%% Set up page headings and footings.
1424:
1425: \let\thispage=\folio
1426:
1427: \newtoks \evenheadline % Token sequence for heading line of even pages
1428: \newtoks \oddheadline % Token sequence for heading line of odd pages
1429: \newtoks \evenfootline % Token sequence for footing line of even pages
1430: \newtoks \oddfootline % Token sequence for footing line of odd pages
1431:
1432: % Now make Tex use those variables
1433: \headline={{\textfonts\rm \ifodd\pageno \the\oddheadline
1434: \else \the\evenheadline \fi}}
1435: \footline={{\textfonts\rm \ifodd\pageno \the\oddfootline
1436: \else \the\evenfootline \fi}\HEADINGShook}
1437: \let\HEADINGShook=\relax
1438:
1439: % Commands to set those variables.
1440: % For example, this is what @headings on does
1441: % @evenheading @thistitle|@thispage|@thischapter
1442: % @oddheading @thischapter|@thispage|@thistitle
1443: % @evenfooting @thisfile||
1444: % @oddfooting ||@thisfile
1445:
1446: \def\evenheading{\parsearg\evenheadingxxx}
1447: \def\oddheading{\parsearg\oddheadingxxx}
1448: \def\everyheading{\parsearg\everyheadingxxx}
1449:
1450: \def\evenfooting{\parsearg\evenfootingxxx}
1451: \def\oddfooting{\parsearg\oddfootingxxx}
1452: \def\everyfooting{\parsearg\everyfootingxxx}
1453:
1454: {\catcode`\@=0 %
1455:
1456: \gdef\evenheadingxxx #1{\evenheadingyyy #1@|@|@|@|\finish}
1457: \gdef\evenheadingyyy #1@|#2@|#3@|#4\finish{%
1458: \global\evenheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
1459:
1460: \gdef\oddheadingxxx #1{\oddheadingyyy #1@|@|@|@|\finish}
1461: \gdef\oddheadingyyy #1@|#2@|#3@|#4\finish{%
1462: \global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
1463:
1464: \gdef\everyheadingxxx #1{\everyheadingyyy #1@|@|@|@|\finish}
1465: \gdef\everyheadingyyy #1@|#2@|#3@|#4\finish{%
1466: \global\evenheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}
1467: \global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
1468:
1469: \gdef\evenfootingxxx #1{\evenfootingyyy #1@|@|@|@|\finish}
1470: \gdef\evenfootingyyy #1@|#2@|#3@|#4\finish{%
1471: \global\evenfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
1472:
1473: \gdef\oddfootingxxx #1{\oddfootingyyy #1@|@|@|@|\finish}
1474: \gdef\oddfootingyyy #1@|#2@|#3@|#4\finish{%
1475: \global\oddfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
1476:
1477: \gdef\everyfootingxxx #1{\everyfootingyyy #1@|@|@|@|\finish}
1478: \gdef\everyfootingyyy #1@|#2@|#3@|#4\finish{%
1479: \global\evenfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}
1480: \global\oddfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
1481: %
1482: }% unbind the catcode of @.
1483:
1484: % @headings double turns headings on for double-sided printing.
1485: % @headings single turns headings on for single-sided printing.
1486: % @headings off turns them off.
1487: % @headings on same as @headings double, retained for compatibility.
1488: % @headings after turns on double-sided headings after this page.
1489: % @headings doubleafter turns on double-sided headings after this page.
1490: % @headings singleafter turns on single-sided headings after this page.
1491: % By default, they are off at the start of a document,
1492: % and turned `on' after @end titlepage.
1493:
1494: \def\headings #1 {\csname HEADINGS#1\endcsname}
1495:
1496: \def\HEADINGSoff{
1497: \global\evenheadline={\hfil} \global\evenfootline={\hfil}
1498: \global\oddheadline={\hfil} \global\oddfootline={\hfil}}
1499: \HEADINGSoff
1500: % When we turn headings on, set the page number to 1.
1501: % For double-sided printing, put current file name in lower left corner,
1502: % chapter name on inside top of right hand pages, document
1503: % title on inside top of left hand pages, and page numbers on outside top
1504: % edge of all pages.
1505: \def\HEADINGSdouble{
1506: \global\pageno=1
1507: \global\evenfootline={\hfil}
1508: \global\oddfootline={\hfil}
1509: \global\evenheadline={\line{\folio\hfil\thistitle}}
1510: \global\oddheadline={\line{\thischapter\hfil\folio}}
1511: \global\let\contentsalignmacro = \chapoddpage
1512: }
1513: \let\contentsalignmacro = \chappager
1514:
1515: % For single-sided printing, chapter title goes across top left of page,
1516: % page number on top right.
1517: \def\HEADINGSsingle{
1518: \global\pageno=1
1519: \global\evenfootline={\hfil}
1520: \global\oddfootline={\hfil}
1521: \global\evenheadline={\line{\thischapter\hfil\folio}}
1522: \global\oddheadline={\line{\thischapter\hfil\folio}}
1523: \global\let\contentsalignmacro = \chappager
1524: }
1525: \def\HEADINGSon{\HEADINGSdouble}
1526:
1527: \def\HEADINGSafter{\let\HEADINGShook=\HEADINGSdoublex}
1528: \let\HEADINGSdoubleafter=\HEADINGSafter
1529: \def\HEADINGSdoublex{%
1530: \global\evenfootline={\hfil}
1531: \global\oddfootline={\hfil}
1532: \global\evenheadline={\line{\folio\hfil\thistitle}}
1533: \global\oddheadline={\line{\thischapter\hfil\folio}}
1534: \global\let\contentsalignmacro = \chapoddpage
1535: }
1536:
1537: \def\HEADINGSsingleafter{\let\HEADINGShook=\HEADINGSsinglex}
1538: \def\HEADINGSsinglex{%
1539: \global\evenfootline={\hfil}
1540: \global\oddfootline={\hfil}
1541: \global\evenheadline={\line{\thischapter\hfil\folio}}
1542: \global\oddheadline={\line{\thischapter\hfil\folio}}
1543: \global\let\contentsalignmacro = \chappager
1544: }
1545:
1546: % Subroutines used in generating headings
1547: % Produces Day Month Year style of output.
1548: \def\today{\number\day\space
1549: \ifcase\month\or
1550: January\or February\or March\or April\or May\or June\or
1551: July\or August\or September\or October\or November\or December\fi
1552: \space\number\year}
1553:
1554: % Use this if you want the Month Day, Year style of output.
1555: %\def\today{\ifcase\month\or
1556: %January\or February\or March\or April\or May\or June\or
1557: %July\or August\or September\or October\or November\or December\fi
1558: %\space\number\day, \number\year}
1559:
1560: % @settitle line... specifies the title of the document, for headings
1561: % It generates no output of its own
1562:
1563: \def\thistitle{No Title}
1564: \def\settitle{\parsearg\settitlezzz}
1565: \def\settitlezzz #1{\gdef\thistitle{#1}}
1566:
1567:
1568: \message{tables,}
1569:
1570: % @tabs -- simple alignment
1571:
1572: % These don't work. For one thing, \+ is defined as outer.
1573: % So these macros cannot even be defined.
1574:
1575: %\def\tabs{\parsearg\tabszzz}
1576: %\def\tabszzz #1{\settabs\+#1\cr}
1577: %\def\tabline{\parsearg\tablinezzz}
1578: %\def\tablinezzz #1{\+#1\cr}
1579: %\def\&{&}
1580:
1581: % Tables -- @table, @ftable, @vtable, @item(x), @kitem(x), @xitem(x).
1582:
1583: % default indentation of table text
1584: \newdimen\tableindent \tableindent=.8in
1585: % default indentation of @itemize and @enumerate text
1586: \newdimen\itemindent \itemindent=.3in
1587: % margin between end of table item and start of table text.
1588: \newdimen\itemmargin \itemmargin=.1in
1589:
1590: % used internally for \itemindent minus \itemmargin
1591: \newdimen\itemmax
1592:
1593: % Note @table, @vtable, and @vtable define @item, @itemx, etc., with
1594: % these defs.
1595: % They also define \itemindex
1596: % to index the item name in whatever manner is desired (perhaps none).
1597:
1598: \newif\ifitemxneedsnegativevskip
1599:
1600: \def\itemxpar{\par\ifitemxneedsnegativevskip\nobreak\vskip-\parskip\nobreak\fi}
1601:
1602: \def\internalBitem{\smallbreak \parsearg\itemzzz}
1603: \def\internalBitemx{\itemxpar \parsearg\itemzzz}
1604:
1605: \def\internalBxitem "#1"{\def\xitemsubtopix{#1} \smallbreak \parsearg\xitemzzz}
1606: \def\internalBxitemx "#1"{\def\xitemsubtopix{#1} \itemxpar \parsearg\xitemzzz}
1607:
1608: \def\internalBkitem{\smallbreak \parsearg\kitemzzz}
1609: \def\internalBkitemx{\itemxpar \parsearg\kitemzzz}
1610:
1611: \def\kitemzzz #1{\dosubind {kw}{\code{#1}}{for {\bf \lastfunction}}%
1612: \itemzzz {#1}}
1613:
1614: \def\xitemzzz #1{\dosubind {kw}{\code{#1}}{for {\bf \xitemsubtopic}}%
1615: \itemzzz {#1}}
1616:
1617: \def\itemzzz #1{\begingroup %
1618: \advance\hsize by -\rightskip
1619: \advance\hsize by -\tableindent
1620: \setbox0=\hbox{\itemfont{#1}}%
1621: \itemindex{#1}%
1622: \nobreak % This prevents a break before @itemx.
1623: %
1624: % Be sure we are not still in the middle of a paragraph.
1625: %{\parskip = 0in
1626: %\par
1627: %}%
1628: %
1629: % If the item text does not fit in the space we have, put it on a line
1630: % by itself, and do not allow a page break either before or after that
1631: % line. We do not start a paragraph here because then if the next
1632: % command is, e.g., @kindex, the whatsit would get put into the
1633: % horizontal list on a line by itself, resulting in extra blank space.
1634: \ifdim \wd0>\itemmax
1635: %
1636: % Make this a paragraph so we get the \parskip glue and wrapping,
1637: % but leave it ragged-right.
1638: \begingroup
1639: \advance\leftskip by-\tableindent
1640: \advance\hsize by\tableindent
1641: \advance\rightskip by0pt plus1fil
1642: \leavevmode\unhbox0\par
1643: \endgroup
1644: %
1645: % We're going to be starting a paragraph, but we don't want the
1646: % \parskip glue -- logically it's part of the @item we just started.
1647: \nobreak \vskip-\parskip
1648: %
1649: % Stop a page break at the \parskip glue coming up. Unfortunately
1650: % we can't prevent a possible page break at the following
1651: % \baselineskip glue.
1652: \nobreak
1653: \endgroup
1654: \itemxneedsnegativevskipfalse
1655: \else
1656: % The item text fits into the space. Start a paragraph, so that the
1657: % following text (if any) will end up on the same line. Since that
1658: % text will be indented by \tableindent, we make the item text be in
1659: % a zero-width box.
1660: \noindent
1661: \rlap{\hskip -\tableindent\box0}\ignorespaces%
1662: \endgroup%
1663: \itemxneedsnegativevskiptrue%
1664: \fi
1665: }
1666:
1667: \def\item{\errmessage{@item while not in a table}}
1668: \def\itemx{\errmessage{@itemx while not in a table}}
1669: \def\kitem{\errmessage{@kitem while not in a table}}
1670: \def\kitemx{\errmessage{@kitemx while not in a table}}
1671: \def\xitem{\errmessage{@xitem while not in a table}}
1672: \def\xitemx{\errmessage{@xitemx while not in a table}}
1673:
1674: %% Contains a kludge to get @end[description] to work
1675: \def\description{\tablez{\dontindex}{1}{}{}{}{}}
1676:
1677: \def\table{\begingroup\inENV\obeylines\obeyspaces\tablex}
1678: {\obeylines\obeyspaces%
1679: \gdef\tablex #1^^M{%
1680: \tabley\dontindex#1 \endtabley}}
1681:
1682: \def\ftable{\begingroup\inENV\obeylines\obeyspaces\ftablex}
1683: {\obeylines\obeyspaces%
1684: \gdef\ftablex #1^^M{%
1685: \tabley\fnitemindex#1 \endtabley
1686: \def\Eftable{\endgraf\afterenvbreak\endgroup}%
1687: \let\Etable=\relax}}
1688:
1689: \def\vtable{\begingroup\inENV\obeylines\obeyspaces\vtablex}
1690: {\obeylines\obeyspaces%
1691: \gdef\vtablex #1^^M{%
1692: \tabley\vritemindex#1 \endtabley
1693: \def\Evtable{\endgraf\afterenvbreak\endgroup}%
1694: \let\Etable=\relax}}
1695:
1696: \def\dontindex #1{}
1697: \def\fnitemindex #1{\doind {fn}{\code{#1}}}%
1698: \def\vritemindex #1{\doind {vr}{\code{#1}}}%
1699:
1700: {\obeyspaces %
1701: \gdef\tabley#1#2 #3 #4 #5 #6 #7\endtabley{\endgroup%
1702: \tablez{#1}{#2}{#3}{#4}{#5}{#6}}}
1703:
1704: \def\tablez #1#2#3#4#5#6{%
1705: \aboveenvbreak %
1706: \begingroup %
1707: \def\Edescription{\Etable}% Necessary kludge.
1708: \let\itemindex=#1%
1709: \ifnum 0#3>0 \advance \leftskip by #3\mil \fi %
1710: \ifnum 0#4>0 \tableindent=#4\mil \fi %
1711: \ifnum 0#5>0 \advance \rightskip by #5\mil \fi %
1712: \def\itemfont{#2}%
1713: \itemmax=\tableindent %
1714: \advance \itemmax by -\itemmargin %
1715: \advance \leftskip by \tableindent %
1716: \exdentamount=\tableindent
1717: \parindent = 0pt
1718: \parskip = \smallskipamount
1719: \ifdim \parskip=0pt \parskip=2pt \fi%
1720: \def\Etable{\endgraf\afterenvbreak\endgroup}%
1721: \let\item = \internalBitem %
1722: \let\itemx = \internalBitemx %
1723: \let\kitem = \internalBkitem %
1724: \let\kitemx = \internalBkitemx %
1725: \let\xitem = \internalBxitem %
1726: \let\xitemx = \internalBxitemx %
1727: }
1728:
1729: % This is the counter used by @enumerate, which is really @itemize
1730:
1731: \newcount \itemno
1732:
1733: \def\itemize{\parsearg\itemizezzz}
1734:
1735: \def\itemizezzz #1{%
1736: \begingroup % ended by the @end itemsize
1737: \itemizey {#1}{\Eitemize}
1738: }
1739:
1740: \def\itemizey #1#2{%
1741: \aboveenvbreak %
1742: \itemmax=\itemindent %
1743: \advance \itemmax by -\itemmargin %
1744: \advance \leftskip by \itemindent %
1745: \exdentamount=\itemindent
1746: \parindent = 0pt %
1747: \parskip = \smallskipamount %
1748: \ifdim \parskip=0pt \parskip=2pt \fi%
1749: \def#2{\endgraf\afterenvbreak\endgroup}%
1750: \def\itemcontents{#1}%
1751: \let\item=\itemizeitem}
1752:
1753: % Set sfcode to normal for the chars that usually have another value.
1754: % These are `.?!:;,'
1755: \def\frenchspacing{\sfcode46=1000 \sfcode63=1000 \sfcode33=1000
1756: \sfcode58=1000 \sfcode59=1000 \sfcode44=1000 }
1757:
1758: % \splitoff TOKENS\endmark defines \first to be the first token in
1759: % TOKENS, and \rest to be the remainder.
1760: %
1761: \def\splitoff#1#2\endmark{\def\first{#1}\def\rest{#2}}%
1762:
1763: % Allow an optional argument of an uppercase letter, lowercase letter,
1764: % or number, to specify the first label in the enumerated list. No
1765: % argument is the same as `1'.
1766: %
1767: \def\enumerate{\parsearg\enumeratezzz}
1768: \def\enumeratezzz #1{\enumeratey #1 \endenumeratey}
1769: \def\enumeratey #1 #2\endenumeratey{%
1770: \begingroup % ended by the @end enumerate
1771: %
1772: % If we were given no argument, pretend we were given `1'.
1773: \def\thearg{#1}%
1774: \ifx\thearg\empty \def\thearg{1}\fi
1775: %
1776: % Detect if the argument is a single token. If so, it might be a
1777: % letter. Otherwise, the only valid thing it can be is a number.
1778: % (We will always have one token, because of the test we just made.
1779: % This is a good thing, since \splitoff doesn't work given nothing at
1780: % all -- the first parameter is undelimited.)
1781: \expandafter\splitoff\thearg\endmark
1782: \ifx\rest\empty
1783: % Only one token in the argument. It could still be anything.
1784: % A ``lowercase letter'' is one whose \lccode is nonzero.
1785: % An ``uppercase letter'' is one whose \lccode is both nonzero, and
1786: % not equal to itself.
1787: % Otherwise, we assume it's a number.
1788: %
1789: % We need the \relax at the end of the \ifnum lines to stop TeX from
1790: % continuing to look for a <number>.
1791: %
1792: \ifnum\lccode\expandafter`\thearg=0\relax
1793: \numericenumerate % a number (we hope)
1794: \else
1795: % It's a letter.
1796: \ifnum\lccode\expandafter`\thearg=\expandafter`\thearg\relax
1797: \lowercaseenumerate % lowercase letter
1798: \else
1799: \uppercaseenumerate % uppercase letter
1800: \fi
1801: \fi
1802: \else
1803: % Multiple tokens in the argument. We hope it's a number.
1804: \numericenumerate
1805: \fi
1806: }
1807:
1808: % An @enumerate whose labels are integers. The starting integer is
1809: % given in \thearg.
1810: %
1811: \def\numericenumerate{%
1812: \itemno = \thearg
1813: \startenumeration{\the\itemno}%
1814: }
1815:
1816: % The starting (lowercase) letter is in \thearg.
1817: \def\lowercaseenumerate{%
1818: \itemno = \expandafter`\thearg
1819: \startenumeration{%
1820: % Be sure we're not beyond the end of the alphabet.
1821: \ifnum\itemno=0
1822: \errmessage{No more lowercase letters in @enumerate; get a bigger
1823: alphabet}%
1824: \fi
1825: \char\lccode\itemno
1826: }%
1827: }
1828:
1829: % The starting (uppercase) letter is in \thearg.
1830: \def\uppercaseenumerate{%
1831: \itemno = \expandafter`\thearg
1832: \startenumeration{%
1833: % Be sure we're not beyond the end of the alphabet.
1834: \ifnum\itemno=0
1835: \errmessage{No more uppercase letters in @enumerate; get a bigger
1836: alphabet}
1837: \fi
1838: \char\uccode\itemno
1839: }%
1840: }
1841:
1842: % Call itemizey, adding a period to the first argument and supplying the
1843: % common last two arguments. Also subtract one from the initial value in
1844: % \itemno, since @item increments \itemno.
1845: %
1846: \def\startenumeration#1{%
1847: \advance\itemno by -1
1848: \itemizey{#1.}\Eenumerate\flushcr
1849: }
1850:
1851: % @alphaenumerate and @capsenumerate are abbreviations for giving an arg
1852: % to @enumerate.
1853: %
1854: \def\alphaenumerate{\enumerate{a}}
1855: \def\capsenumerate{\enumerate{A}}
1856: \def\Ealphaenumerate{\Eenumerate}
1857: \def\Ecapsenumerate{\Eenumerate}
1858:
1859: % Definition of @item while inside @itemize.
1860:
1861: \def\itemizeitem{%
1862: \advance\itemno by 1
1863: {\let\par=\endgraf \smallbreak}%
1864: \ifhmode \errmessage{\in hmode at itemizeitem}\fi
1865: {\parskip=0in \hskip 0pt
1866: \hbox to 0pt{\hss \itemcontents\hskip \itemmargin}%
1867: \vadjust{\penalty 1200}}%
1868: \flushcr}
1869:
1870: % @multitable macros
1871: % Amy Hendrickson, 8/18/94, 3/6/96
1872: %
1873: % @multitable ... @end multitable will make as many columns as desired.
1874: % Contents of each column will wrap at width given in preamble. Width
1875: % can be specified either with sample text given in a template line,
1876: % or in percent of \hsize, the current width of text on page.
1877:
1878: % Table can continue over pages but will only break between lines.
1879:
1880: % To make preamble:
1881: %
1882: % Either define widths of columns in terms of percent of \hsize:
1883: % @multitable @columnfractions .25 .3 .45
1884: % @item ...
1885: %
1886: % Numbers following @columnfractions are the percent of the total
1887: % current hsize to be used for each column. You may use as many
1888: % columns as desired.
1889:
1890:
1891: % Or use a template:
1892: % @multitable {Column 1 template} {Column 2 template} {Column 3 template}
1893: % @item ...
1894: % using the widest term desired in each column.
1895: %
1896: % For those who want to use more than one line's worth of words in
1897: % the preamble, break the line within one argument and it
1898: % will parse correctly, i.e.,
1899: %
1900: % @multitable {Column 1 template} {Column 2 template} {Column 3
1901: % template}
1902: % Not:
1903: % @multitable {Column 1 template} {Column 2 template}
1904: % {Column 3 template}
1905:
1906: % Each new table line starts with @item, each subsequent new column
1907: % starts with @tab. Empty columns may be produced by supplying @tab's
1908: % with nothing between them for as many times as empty columns are needed,
1909: % ie, @tab@tab@tab will produce two empty columns.
1910:
1911: % @item, @tab, @multitable or @end multitable do not need to be on their
1912: % own lines, but it will not hurt if they are.
1913:
1914: % Sample multitable:
1915:
1916: % @multitable {Column 1 template} {Column 2 template} {Column 3 template}
1917: % @item first col stuff @tab second col stuff @tab third col
1918: % @item
1919: % first col stuff
1920: % @tab
1921: % second col stuff
1922: % @tab
1923: % third col
1924: % @item first col stuff @tab second col stuff
1925: % @tab Many paragraphs of text may be used in any column.
1926: %
1927: % They will wrap at the width determined by the template.
1928: % @item@tab@tab This will be in third column.
1929: % @end multitable
1930:
1931: % Default dimensions may be reset by user.
1932: % @multitableparskip is vertical space between paragraphs in table.
1933: % @multitableparindent is paragraph indent in table.
1934: % @multitablecolmargin is horizontal space to be left between columns.
1935: % @multitablelinespace is space to leave between table items, baseline
1936: % to baseline.
1937: % 0pt means it depends on current normal line spacing.
1938:
1939: %%%%
1940: % Dimensions
1941:
1942: \newskip\multitableparskip
1943: \newskip\multitableparindent
1944: \newdimen\multitablecolspace
1945: \newskip\multitablelinespace
1946: \multitableparskip=0pt
1947: \multitableparindent=6pt
1948: \multitablecolspace=12pt
1949: \multitablelinespace=0pt
1950:
1951: %%%%
1952: % Macros used to set up halign preamble:
1953: \let\endsetuptable\relax
1954: \def\xendsetuptable{\endsetuptable}
1955: \let\columnfractions\relax
1956: \def\xcolumnfractions{\columnfractions}
1957: \newif\ifsetpercent
1958:
1959: %% 2/1/96, to allow fractions to be given with more than one digit.
1960: \def\pickupwholefraction#1 {\global\advance\colcount by1 %
1961: \expandafter\xdef\csname col\the\colcount\endcsname{.#1\hsize}%
1962: \setuptable}
1963:
1964: \newcount\colcount
1965: \def\setuptable#1{\def\firstarg{#1}%
1966: \ifx\firstarg\xendsetuptable\let\go\relax%
1967: \else
1968: \ifx\firstarg\xcolumnfractions\global\setpercenttrue%
1969: \else
1970: \ifsetpercent
1971: \let\go\pickupwholefraction % In this case arg of setuptable
1972: % is the decimal point before the
1973: % number given in percent of hsize.
1974: % We don't need this so we don't use it.
1975: \else
1976: \global\advance\colcount by1
1977: \setbox0=\hbox{#1 }% Add a normal word space as a separator;
1978: % typically that is always in the input, anyway.
1979: \expandafter\xdef\csname col\the\colcount\endcsname{\the\wd0}%
1980: \fi%
1981: \fi%
1982: \ifx\go\pickupwholefraction\else\let\go\setuptable\fi%
1983: \fi\go}
1984:
1985: %%%%
1986: % multitable syntax
1987: \def\tab{&\hskip1sp\relax} % 2/2/96
1988: % tiny skip here makes sure this column space is
1989: % maintained, even if it is never used.
1990:
1991:
1992: %%%%
1993: % @multitable ... @end multitable definitions:
1994:
1995: \def\multitable{\parsearg\dotable}
1996:
1997: \def\dotable#1{\bgroup
1998: \let\item\cr
1999: \tolerance=9500
2000: \hbadness=9500
2001: \setmultitablespacing
2002: \parskip=\multitableparskip
2003: \parindent=\multitableparindent
2004: \overfullrule=0pt
2005: \global\colcount=0\relax%
2006: \def\Emultitable{\global\setpercentfalse\global\everycr{}\cr\egroup\egroup}%
2007: % To parse everything between @multitable and @item :
2008: \setuptable#1 \endsetuptable
2009: % Need to reset this to 0 after \setuptable.
2010: \global\colcount=0\relax%
2011: %
2012: % This preamble sets up a generic column definition, which will
2013: % be used as many times as user calls for columns.
2014: % \vtop will set a single line and will also let text wrap and
2015: % continue for many paragraphs if desired.
2016: \halign\bgroup&\global\advance\colcount by 1\relax%
2017: \multistrut\vtop{\hsize=\expandafter\csname col\the\colcount\endcsname
2018: % In order to keep entries from bumping into each other
2019: % we will add a \leftskip of \multitablecolspace to all columns after
2020: % the first one.
2021: % If a template has been used, we will add \multitablecolspace
2022: % to the width of each template entry.
2023: % If user has set preamble in terms of percent of \hsize
2024: % we will use that dimension as the width of the column, and
2025: % the \leftskip will keep entries from bumping into each other.
2026: % Table will start at left margin and final column will justify at
2027: % right margin.
2028: \ifnum\colcount=1
2029: \else
2030: \ifsetpercent
2031: \else
2032: % If user has <not> set preamble in terms of percent of \hsize
2033: % we will advance \hsize by \multitablecolspace
2034: \advance\hsize by \multitablecolspace
2035: \fi
2036: % In either case we will make \leftskip=\multitablecolspace:
2037: \leftskip=\multitablecolspace
2038: \fi
2039: \noindent##\multistrut}\cr%
2040: % \everycr will reset column counter, \colcount, at the end of
2041: % each line. Every column entry will cause \colcount to advance by one.
2042: % The table preamble
2043: % looks at the current \colcount to find the correct column width.
2044: \global\everycr{\noalign{%
2045: \filbreak%% keeps underfull box messages off when table breaks over pages.
2046: \global\colcount=0\relax}}
2047: }
2048:
2049: \def\setmultitablespacing{% test to see if user has set \multitablelinespace.
2050: % If so, do nothing. If not, give it an appropriate dimension based on
2051: % current baselineskip.
2052: \ifdim\multitablelinespace=0pt
2053: %% strut to put in table in case some entry doesn't have descenders,
2054: %% to keep lines equally spaced
2055: \let\multistrut = \strut
2056: %% Test to see if parskip is larger than space between lines of
2057: %% table. If not, do nothing.
2058: %% If so, set to same dimension as multitablelinespace.
2059: \else
2060: \gdef\multistrut{\vrule height\multitablelinespace depth\dp0
2061: width0pt\relax} \fi
2062: \ifdim\multitableparskip>\multitablelinespace
2063: \global\multitableparskip=\multitablelinespace
2064: \global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller
2065: %% than skip between lines in the table.
2066: \fi%
2067: \ifdim\multitableparskip=0pt
2068: \global\multitableparskip=\multitablelinespace
2069: \global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller
2070: %% than skip between lines in the table.
2071: \fi}
2072:
2073:
2074: \message{indexing,}
2075: % Index generation facilities
2076:
2077: % Define \newwrite to be identical to plain tex's \newwrite
2078: % except not \outer, so it can be used within \newindex.
2079: {\catcode`\@=11
2080: \gdef\newwrite{\alloc@7\write\chardef\sixt@@n}}
2081:
2082: % \newindex {foo} defines an index named foo.
2083: % It automatically defines \fooindex such that
2084: % \fooindex ...rest of line... puts an entry in the index foo.
2085: % It also defines \fooindfile to be the number of the output channel for
2086: % the file that accumulates this index. The file's extension is foo.
2087: % The name of an index should be no more than 2 characters long
2088: % for the sake of vms.
2089:
2090: \def\newindex #1{
2091: \expandafter\newwrite \csname#1indfile\endcsname% Define number for output file
2092: \openout \csname#1indfile\endcsname \jobname.#1 % Open the file
2093: \expandafter\xdef\csname#1index\endcsname{% % Define \xxxindex
2094: \noexpand\doindex {#1}}
2095: }
2096:
2097: % @defindex foo == \newindex{foo}
2098:
2099: \def\defindex{\parsearg\newindex}
2100:
2101: % Define @defcodeindex, like @defindex except put all entries in @code.
2102:
2103: \def\newcodeindex #1{
2104: \expandafter\newwrite \csname#1indfile\endcsname% Define number for output file
2105: \openout \csname#1indfile\endcsname \jobname.#1 % Open the file
2106: \expandafter\xdef\csname#1index\endcsname{% % Define \xxxindex
2107: \noexpand\docodeindex {#1}}
2108: }
2109:
2110: \def\defcodeindex{\parsearg\newcodeindex}
2111:
2112: % @synindex foo bar makes index foo feed into index bar.
2113: % Do this instead of @defindex foo if you don't want it as a separate index.
2114: \def\synindex #1 #2 {%
2115: \expandafter\let\expandafter\synindexfoo\expandafter=\csname#2indfile\endcsname
2116: \expandafter\let\csname#1indfile\endcsname=\synindexfoo
2117: \expandafter\xdef\csname#1index\endcsname{% % Define \xxxindex
2118: \noexpand\doindex {#2}}%
2119: }
2120:
2121: % @syncodeindex foo bar similar, but put all entries made for index foo
2122: % inside @code.
2123: \def\syncodeindex #1 #2 {%
2124: \expandafter\let\expandafter\synindexfoo\expandafter=\csname#2indfile\endcsname
2125: \expandafter\let\csname#1indfile\endcsname=\synindexfoo
2126: \expandafter\xdef\csname#1index\endcsname{% % Define \xxxindex
2127: \noexpand\docodeindex {#2}}%
2128: }
2129:
2130: % Define \doindex, the driver for all \fooindex macros.
2131: % Argument #1 is generated by the calling \fooindex macro,
2132: % and it is "foo", the name of the index.
2133:
2134: % \doindex just uses \parsearg; it calls \doind for the actual work.
2135: % This is because \doind is more useful to call from other macros.
2136:
2137: % There is also \dosubind {index}{topic}{subtopic}
2138: % which makes an entry in a two-level index such as the operation index.
2139:
2140: \def\doindex#1{\edef\indexname{#1}\parsearg\singleindexer}
2141: \def\singleindexer #1{\doind{\indexname}{#1}}
2142:
2143: % like the previous two, but they put @code around the argument.
2144: \def\docodeindex#1{\edef\indexname{#1}\parsearg\singlecodeindexer}
2145: \def\singlecodeindexer #1{\doind{\indexname}{\code{#1}}}
2146:
2147: \def\indexdummies{%
2148: % Take care of the plain tex accent commands.
2149: \def\"{\realbackslash "}%
2150: \def\`{\realbackslash `}%
2151: \def\'{\realbackslash '}%
2152: \def\^{\realbackslash ^}%
2153: \def\~{\realbackslash ~}%
2154: \def\={\realbackslash =}%
2155: \def\b{\realbackslash b}%
2156: \def\c{\realbackslash c}%
2157: \def\d{\realbackslash d}%
2158: \def\u{\realbackslash u}%
2159: \def\v{\realbackslash v}%
2160: \def\H{\realbackslash H}%
2161: % Take care of the plain tex special European modified letters.
2162: \def\oe{\realbackslash oe}%
2163: \def\ae{\realbackslash ae}%
2164: \def\aa{\realbackslash aa}%
2165: \def\OE{\realbackslash OE}%
2166: \def\AE{\realbackslash AE}%
2167: \def\AA{\realbackslash AA}%
2168: \def\o{\realbackslash o}%
2169: \def\O{\realbackslash O}%
2170: \def\l{\realbackslash l}%
2171: \def\L{\realbackslash L}%
2172: \def\ss{\realbackslash ss}%
2173: % Take care of texinfo commands likely to appear in an index entry.
2174: % (Must be a way to avoid doing expansion at all, and thus not have to
2175: % laboriously list every single command here.)
2176: \def\@{@}% will be @@ when we switch to @ as escape char.
2177: %\let\{ = \lbracecmd
2178: %\let\} = \rbracecmd
2179: \def\_{{\realbackslash _}}%
2180: \def\w{\realbackslash w }%
2181: \def\bf{\realbackslash bf }%
2182: %\def\rm{\realbackslash rm }%
2183: \def\sl{\realbackslash sl }%
2184: \def\sf{\realbackslash sf}%
2185: \def\tt{\realbackslash tt}%
2186: \def\gtr{\realbackslash gtr}%
2187: \def\less{\realbackslash less}%
2188: \def\hat{\realbackslash hat}%
2189: %\def\char{\realbackslash char}%
2190: \def\TeX{\realbackslash TeX}%
2191: \def\dots{\realbackslash dots }%
2192: \def\copyright{\realbackslash copyright }%
2193: \def\tclose##1{\realbackslash tclose {##1}}%
2194: \def\code##1{\realbackslash code {##1}}%
2195: \def\dotless##1{\realbackslash dotless {##1}}%
2196: \def\samp##1{\realbackslash samp {##1}}%
2197: \def\,##1{\realbackslash ,{##1}}%
2198: \def\t##1{\realbackslash t {##1}}%
2199: \def\r##1{\realbackslash r {##1}}%
2200: \def\i##1{\realbackslash i {##1}}%
2201: \def\b##1{\realbackslash b {##1}}%
2202: \def\cite##1{\realbackslash cite {##1}}%
2203: \def\key##1{\realbackslash key {##1}}%
2204: \def\file##1{\realbackslash file {##1}}%
2205: \def\var##1{\realbackslash var {##1}}%
2206: \def\kbd##1{\realbackslash kbd {##1}}%
2207: \def\dfn##1{\realbackslash dfn {##1}}%
2208: \def\emph##1{\realbackslash emph {##1}}%
2209: \unsepspaces
2210: }
2211:
2212: % If an index command is used in an @example environment, any spaces
2213: % therein should become regular spaces in the raw index file, not the
2214: % expansion of \tie (\\leavevmode \penalty \@M \ ).
2215: {\obeyspaces
2216: \gdef\unsepspaces{\obeyspaces\let =\space}}
2217:
2218: % \indexnofonts no-ops all font-change commands.
2219: % This is used when outputting the strings to sort the index by.
2220: \def\indexdummyfont#1{#1}
2221: \def\indexdummytex{TeX}
2222: \def\indexdummydots{...}
2223:
2224: \def\indexnofonts{%
2225: % Just ignore accents.
2226: \let\,=\indexdummyfont
2227: \let\"=\indexdummyfont
2228: \let\`=\indexdummyfont
2229: \let\'=\indexdummyfont
2230: \let\^=\indexdummyfont
2231: \let\~=\indexdummyfont
2232: \let\==\indexdummyfont
2233: \let\b=\indexdummyfont
2234: \let\c=\indexdummyfont
2235: \let\d=\indexdummyfont
2236: \let\u=\indexdummyfont
2237: \let\v=\indexdummyfont
2238: \let\H=\indexdummyfont
2239: \let\dotless=\indexdummyfont
2240: % Take care of the plain tex special European modified letters.
2241: \def\oe{oe}%
2242: \def\ae{ae}%
2243: \def\aa{aa}%
2244: \def\OE{OE}%
2245: \def\AE{AE}%
2246: \def\AA{AA}%
2247: \def\o{o}%
2248: \def\O{O}%
2249: \def\l{l}%
2250: \def\L{L}%
2251: \def\ss{ss}%
2252: \let\w=\indexdummyfont
2253: \let\t=\indexdummyfont
2254: \let\r=\indexdummyfont
2255: \let\i=\indexdummyfont
2256: \let\b=\indexdummyfont
2257: \let\emph=\indexdummyfont
2258: \let\strong=\indexdummyfont
2259: \let\cite=\indexdummyfont
2260: \let\sc=\indexdummyfont
2261: %Don't no-op \tt, since it isn't a user-level command
2262: % and is used in the definitions of the active chars like <, >, |...
2263: %\let\tt=\indexdummyfont
2264: \let\tclose=\indexdummyfont
2265: \let\code=\indexdummyfont
2266: \let\file=\indexdummyfont
2267: \let\samp=\indexdummyfont
2268: \let\kbd=\indexdummyfont
2269: \let\key=\indexdummyfont
2270: \let\var=\indexdummyfont
2271: \let\TeX=\indexdummytex
2272: \let\dots=\indexdummydots
2273: \def\@{@}%
2274: }
2275:
2276: % To define \realbackslash, we must make \ not be an escape.
2277: % We must first make another character (@) an escape
2278: % so we do not become unable to do a definition.
2279:
2280: {\catcode`\@=0 \catcode`\\=\other
2281: @gdef@realbackslash{\}}
2282:
2283: \let\indexbackslash=0 %overridden during \printindex.
2284:
2285: \let\SETmarginindex=\relax %initialize!
2286: % workhorse for all \fooindexes
2287: % #1 is name of index, #2 is stuff to put there
2288: \def\doind #1#2{%
2289: % Put the index entry in the margin if desired.
2290: \ifx\SETmarginindex\relax\else
2291: \insert\margin{\hbox{\vrule height8pt depth3pt width0pt #2}}%
2292: \fi
2293: {%
2294: \count255=\lastpenalty
2295: {%
2296: \indexdummies % Must do this here, since \bf, etc expand at this stage
2297: \escapechar=`\\
2298: {%
2299: \let\folio=0 % We will expand all macros now EXCEPT \folio.
2300: \def\rawbackslashxx{\indexbackslash}% \indexbackslash isn't defined now
2301: % so it will be output as is; and it will print as backslash.
2302: %
2303: % First process the index-string with all font commands turned off
2304: % to get the string to sort by.
2305: {\indexnofonts \xdef\indexsorttmp{#2}}%
2306: %
2307: % Now produce the complete index entry, with both the sort key and the
2308: % original text, including any font commands.
2309: \toks0 = {#2}%
2310: \edef\temp{%
2311: \write\csname#1indfile\endcsname{%
2312: \realbackslash entry{\indexsorttmp}{\folio}{\the\toks0}}%
2313: }%
2314: \temp
2315: }%
2316: }%
2317: \penalty\count255
2318: }%
2319: }
2320:
2321: \def\dosubind #1#2#3{%
2322: {\count10=\lastpenalty %
2323: {\indexdummies % Must do this here, since \bf, etc expand at this stage
2324: \escapechar=`\\%
2325: {\let\folio=0%
2326: \def\rawbackslashxx{\indexbackslash}%
2327: %
2328: % Now process the index-string once, with all font commands turned off,
2329: % to get the string to sort the index by.
2330: {\indexnofonts
2331: \xdef\temp1{#2 #3}%
2332: }%
2333: % Now produce the complete index entry. We process the index-string again,
2334: % this time with font commands expanded, to get what to print in the index.
2335: \edef\temp{%
2336: \write \csname#1indfile\endcsname{%
2337: \realbackslash entry {\temp1}{\folio}{#2}{#3}}}%
2338: \temp }%
2339: }\penalty\count10}}
2340:
2341: % The index entry written in the file actually looks like
2342: % \entry {sortstring}{page}{topic}
2343: % or
2344: % \entry {sortstring}{page}{topic}{subtopic}
2345: % The texindex program reads in these files and writes files
2346: % containing these kinds of lines:
2347: % \initial {c}
2348: % before the first topic whose initial is c
2349: % \entry {topic}{pagelist}
2350: % for a topic that is used without subtopics
2351: % \primary {topic}
2352: % for the beginning of a topic that is used with subtopics
2353: % \secondary {subtopic}{pagelist}
2354: % for each subtopic.
2355:
2356: % Define the user-accessible indexing commands
2357: % @findex, @vindex, @kindex, @cindex.
2358:
2359: \def\findex {\fnindex}
2360: \def\kindex {\kyindex}
2361: \def\cindex {\cpindex}
2362: \def\vindex {\vrindex}
2363: \def\tindex {\tpindex}
2364: \def\pindex {\pgindex}
2365:
2366: \def\cindexsub {\begingroup\obeylines\cindexsub}
2367: {\obeylines %
2368: \gdef\cindexsub "#1" #2^^M{\endgroup %
2369: \dosubind{cp}{#2}{#1}}}
2370:
2371: % Define the macros used in formatting output of the sorted index material.
2372:
2373: % This is what you call to cause a particular index to get printed.
2374: % Write
2375: % @unnumbered Function Index
2376: % @printindex fn
2377:
2378: \def\printindex{\parsearg\doprintindex}
2379:
2380: \def\doprintindex#1{\begingroup
2381: \dobreak \chapheadingskip{10000}%
2382: %
2383: \indexfonts \rm
2384: \tolerance = 9500
2385: \indexbreaks
2386: \def\indexbackslash{\rawbackslashxx}%
2387: % Index files are almost Texinfo source, but we use \ as the escape
2388: % character. It would be better to use @, but that's too big a change
2389: % to make right now.
2390: \catcode`\\ = 0
2391: \catcode`\@ = 11
2392: \escapechar = `\\
2393: \begindoublecolumns
2394: %
2395: % See if the index file exists and is nonempty.
2396: \openin 1 \jobname.#1s
2397: \ifeof 1
2398: % \enddoublecolumns gets confused if there is no text in the index,
2399: % and it loses the chapter title and the aux file entries for the
2400: % index. The easiest way to prevent this problem is to make sure
2401: % there is some text.
2402: (Index is nonexistent)
2403: \else
2404: %
2405: % If the index file exists but is empty, then \openin leaves \ifeof
2406: % false. We have to make TeX try to read something from the file, so
2407: % it can discover if there is anything in it.
2408: \read 1 to \temp
2409: \ifeof 1
2410: (Index is empty)
2411: \else
2412: \input \jobname.#1s
2413: \fi
2414: \fi
2415: \closein 1
2416: \enddoublecolumns
2417: \endgroup}
2418:
2419: % These macros are used by the sorted index file itself.
2420: % Change them to control the appearance of the index.
2421:
2422: % Same as \bigskipamount except no shrink.
2423: % \balancecolumns gets confused if there is any shrink.
2424: \newskip\initialskipamount \initialskipamount 12pt plus4pt
2425:
2426: \def\initial #1{%
2427: {\let\tentt=\sectt \let\tt=\sectt \let\sf=\sectt
2428: \ifdim\lastskip<\initialskipamount
2429: \removelastskip \penalty-200 \vskip \initialskipamount\fi
2430: \line{\secbf#1\hfill}\kern 2pt\penalty10000}}
2431:
2432: % This typesets a paragraph consisting of #1, dot leaders, and then #2
2433: % flush to the right margin. It is used for index and table of contents
2434: % entries. The paragraph is indented by \leftskip.
2435: %
2436: \def\entry #1#2{\begingroup
2437: %
2438: % Start a new paragraph if necessary, so our assignments below can't
2439: % affect previous text.
2440: \par
2441: %
2442: % Do not fill out the last line with white space.
2443: \parfillskip = 0in
2444: %
2445: % No extra space above this paragraph.
2446: \parskip = 0in
2447: %
2448: % Do not prefer a separate line ending with a hyphen to fewer lines.
2449: \finalhyphendemerits = 0
2450: %
2451: % \hangindent is only relevant when the entry text and page number
2452: % don't both fit on one line. In that case, bob suggests starting the
2453: % dots pretty far over on the line. Unfortunately, a large
2454: % indentation looks wrong when the entry text itself is broken across
2455: % lines. So we use a small indentation and put up with long leaders.
2456: %
2457: % \hangafter is reset to 1 (which is the value we want) at the start
2458: % of each paragraph, so we need not do anything with that.
2459: \hangindent=2em
2460: %
2461: % When the entry text needs to be broken, just fill out the first line
2462: % with blank space.
2463: \rightskip = 0pt plus1fil
2464: %
2465: % Start a ``paragraph'' for the index entry so the line breaking
2466: % parameters we've set above will have an effect.
2467: \noindent
2468: %
2469: % Insert the text of the index entry. TeX will do line-breaking on it.
2470: #1%
2471: % The following is kludged to not output a line of dots in the index if
2472: % there are no page numbers. The next person who breaks this will be
2473: % cursed by a Unix daemon.
2474: \def\tempa{{\rm }}%
2475: \def\tempb{#2}%
2476: \edef\tempc{\tempa}%
2477: \edef\tempd{\tempb}%
2478: \ifx\tempc\tempd\ \else%
2479: %
2480: % If we must, put the page number on a line of its own, and fill out
2481: % this line with blank space. (The \hfil is overwhelmed with the
2482: % fill leaders glue in \indexdotfill if the page number does fit.)
2483: \hfil\penalty50
2484: \null\nobreak\indexdotfill % Have leaders before the page number.
2485: %
2486: % The `\ ' here is removed by the implicit \unskip that TeX does as
2487: % part of (the primitive) \par. Without it, a spurious underfull
2488: % \hbox ensues.
2489: \ #2% The page number ends the paragraph.
2490: \fi%
2491: \par
2492: \endgroup}
2493:
2494: % Like \dotfill except takes at least 1 em.
2495: \def\indexdotfill{\cleaders
2496: \hbox{$\mathsurround=0pt \mkern1.5mu ${\it .}$ \mkern1.5mu$}\hskip 1em plus 1fill}
2497:
2498: \def\primary #1{\line{#1\hfil}}
2499:
2500: \newskip\secondaryindent \secondaryindent=0.5cm
2501:
2502: \def\secondary #1#2{
2503: {\parfillskip=0in \parskip=0in
2504: \hangindent =1in \hangafter=1
2505: \noindent\hskip\secondaryindent\hbox{#1}\indexdotfill #2\par
2506: }}
2507:
2508: % Define two-column mode, which we use to typeset indexes.
2509: % Adapted from the TeXbook, page 416, which is to say,
2510: % the manmac.tex format used to print the TeXbook itself.
2511: \catcode`\@=11
2512:
2513: \newbox\partialpage
2514: \newdimen\doublecolumnhsize
2515:
2516: \def\begindoublecolumns{\begingroup % ended by \enddoublecolumns
2517: % Grab any single-column material above us.
2518: \output = {\global\setbox\partialpage
2519: =\vbox{\unvbox255\kern -\topskip \kern \baselineskip}}%
2520: \eject
2521: %
2522: % Now switch to the double-column output routine.
2523: \output={\doublecolumnout}%
2524: %
2525: % Change the page size parameters. We could do this once outside this
2526: % routine, in each of @smallbook, @afourpaper, and the default 8.5x11
2527: % format, but then we repeat the same computation. Repeating a couple
2528: % of assignments once per index is clearly meaningless for the
2529: % execution time, so we may as well do it once.
2530: %
2531: % First we halve the line length, less a little for the gutter between
2532: % the columns. We compute the gutter based on the line length, so it
2533: % changes automatically with the paper format. The magic constant
2534: % below is chosen so that the gutter has the same value (well, +- <
2535: % 1pt) as it did when we hard-coded it.
2536: %
2537: % We put the result in a separate register, \doublecolumhsize, so we
2538: % can restore it in \pagesofar, after \hsize itself has (potentially)
2539: % been clobbered.
2540: %
2541: \doublecolumnhsize = \hsize
2542: \advance\doublecolumnhsize by -.04154\hsize
2543: \divide\doublecolumnhsize by 2
2544: \hsize = \doublecolumnhsize
2545: %
2546: % Double the \vsize as well. (We don't need a separate register here,
2547: % since nobody clobbers \vsize.)
2548: \vsize = 2\vsize
2549: }
2550: \def\doublecolumnout{%
2551: \splittopskip=\topskip \splitmaxdepth=\maxdepth
2552: % Get the available space for the double columns -- the normal
2553: % (undoubled) page height minus any material left over from the
2554: % previous page.
2555: \dimen@=\pageheight \advance\dimen@ by-\ht\partialpage
2556: % box0 will be the left-hand column, box1 the right.
2557: \setbox0=\vsplit255 to\dimen@ \setbox2=\vsplit255 to\dimen@
2558: \onepageout\pagesofar
2559: \unvbox255 \penalty\outputpenalty
2560: }
2561: \def\pagesofar{%
2562: % The contents of the output page -- any previous material,
2563: % followed by the two boxes we just split.
2564: \unvbox\partialpage
2565: \hsize = \doublecolumnhsize
2566: \wd0=\hsize \wd2=\hsize \hbox to\pagewidth{\box0\hfil\box2}%
2567: }
2568: \def\enddoublecolumns{%
2569: \output={\balancecolumns}\eject % split what we have
2570: \endgroup
2571: % Back to normal single-column typesetting, but take account of the
2572: % fact that we just accumulated some stuff on the output page.
2573: \pagegoal=\vsize
2574: }
2575: \def\balancecolumns{%
2576: % Called on the last page of the double column material.
2577: \setbox0=\vbox{\unvbox255}%
2578: \dimen@ = \ht0
2579: \advance\dimen@ by \topskip
2580: \advance\dimen@ by-\baselineskip
2581: \divide\dimen@ by 2
2582: \splittopskip = \topskip
2583: % Loop until we get a decent breakpoint.
2584: {\vbadness=10000 \loop \global\setbox3=\copy0
2585: \global\setbox1=\vsplit3 to\dimen@
2586: \ifdim\ht3>\dimen@ \global\advance\dimen@ by1pt \repeat}%
2587: \setbox0=\vbox to\dimen@{\unvbox1}%
2588: \setbox2=\vbox to\dimen@{\unvbox3}%
2589: \pagesofar
2590: }
2591: \catcode `\@=\other
2592:
2593:
2594: \message{sectioning,}
2595: % Define chapters, sections, etc.
2596:
2597: \newcount \chapno
2598: \newcount \secno \secno=0
2599: \newcount \subsecno \subsecno=0
2600: \newcount \subsubsecno \subsubsecno=0
2601:
2602: % This counter is funny since it counts through charcodes of letters A, B, ...
2603: \newcount \appendixno \appendixno = `\@
2604: \def\appendixletter{\char\the\appendixno}
2605:
2606: \newwrite \contentsfile
2607: % This is called from \setfilename.
2608: \def\opencontents{\openout \contentsfile = \jobname.toc}
2609:
2610: % Each @chapter defines this as the name of the chapter.
2611: % page headings and footings can use it. @section does likewise
2612:
2613: \def\thischapter{} \def\thissection{}
2614: \def\seccheck#1{\if \pageno<0 %
2615: \errmessage{@#1 not allowed after generating table of contents}\fi
2616: %
2617: }
2618:
2619: \def\chapternofonts{%
2620: \let\rawbackslash=\relax%
2621: \let\frenchspacing=\relax%
2622: \def\result{\realbackslash result}
2623: \def\equiv{\realbackslash equiv}
2624: \def\expansion{\realbackslash expansion}
2625: \def\print{\realbackslash print}
2626: \def\TeX{\realbackslash TeX}
2627: \def\dots{\realbackslash dots}
2628: \def\copyright{\realbackslash copyright}
2629: \def\tt{\realbackslash tt}
2630: \def\bf{\realbackslash bf }
2631: \def\w{\realbackslash w}
2632: \def\less{\realbackslash less}
2633: \def\gtr{\realbackslash gtr}
2634: \def\hat{\realbackslash hat}
2635: \def\char{\realbackslash char}
2636: \def\tclose##1{\realbackslash tclose {##1}}
2637: \def\code##1{\realbackslash code {##1}}
2638: \def\samp##1{\realbackslash samp {##1}}
2639: \def\r##1{\realbackslash r {##1}}
2640: \def\b##1{\realbackslash b {##1}}
2641: \def\key##1{\realbackslash key {##1}}
2642: \def\file##1{\realbackslash file {##1}}
2643: \def\kbd##1{\realbackslash kbd {##1}}
2644: % These are redefined because @smartitalic wouldn't work inside xdef.
2645: \def\i##1{\realbackslash i {##1}}
2646: \def\cite##1{\realbackslash cite {##1}}
2647: \def\var##1{\realbackslash var {##1}}
2648: \def\emph##1{\realbackslash emph {##1}}
2649: \def\dfn##1{\realbackslash dfn {##1}}
2650: }
2651:
2652: \newcount\absseclevel % used to calculate proper heading level
2653: \newcount\secbase\secbase=0 % @raise/lowersections modify this count
2654:
2655: % @raisesections: treat @section as chapter, @subsection as section, etc.
2656: \def\raisesections{\global\advance\secbase by -1}
2657: \let\up=\raisesections % original BFox name
2658:
2659: % @lowersections: treat @chapter as section, @section as subsection, etc.
2660: \def\lowersections{\global\advance\secbase by 1}
2661: \let\down=\lowersections % original BFox name
2662:
2663: % Choose a numbered-heading macro
2664: % #1 is heading level if unmodified by @raisesections or @lowersections
2665: % #2 is text for heading
2666: \def\numhead#1#2{\absseclevel=\secbase\advance\absseclevel by #1
2667: \ifcase\absseclevel
2668: \chapterzzz{#2}
2669: \or
2670: \seczzz{#2}
2671: \or
2672: \numberedsubseczzz{#2}
2673: \or
2674: \numberedsubsubseczzz{#2}
2675: \else
2676: \ifnum \absseclevel<0
2677: \chapterzzz{#2}
2678: \else
2679: \numberedsubsubseczzz{#2}
2680: \fi
2681: \fi
2682: }
2683:
2684: % like \numhead, but chooses appendix heading levels
2685: \def\apphead#1#2{\absseclevel=\secbase\advance\absseclevel by #1
2686: \ifcase\absseclevel
2687: \appendixzzz{#2}
2688: \or
2689: \appendixsectionzzz{#2}
2690: \or
2691: \appendixsubseczzz{#2}
2692: \or
2693: \appendixsubsubseczzz{#2}
2694: \else
2695: \ifnum \absseclevel<0
2696: \appendixzzz{#2}
2697: \else
2698: \appendixsubsubseczzz{#2}
2699: \fi
2700: \fi
2701: }
2702:
2703: % like \numhead, but chooses numberless heading levels
2704: \def\unnmhead#1#2{\absseclevel=\secbase\advance\absseclevel by #1
2705: \ifcase\absseclevel
2706: \unnumberedzzz{#2}
2707: \or
2708: \unnumberedseczzz{#2}
2709: \or
2710: \unnumberedsubseczzz{#2}
2711: \or
2712: \unnumberedsubsubseczzz{#2}
2713: \else
2714: \ifnum \absseclevel<0
2715: \unnumberedzzz{#2}
2716: \else
2717: \unnumberedsubsubseczzz{#2}
2718: \fi
2719: \fi
2720: }
2721:
2722:
2723: \def\thischaptername{No Chapter Title}
2724: \outer\def\chapter{\parsearg\chapteryyy}
2725: \def\chapteryyy #1{\numhead0{#1}} % normally numhead0 calls chapterzzz
2726: \def\chapterzzz #1{\seccheck{chapter}%
2727: \secno=0 \subsecno=0 \subsubsecno=0
2728: \global\advance \chapno by 1 \message{\putwordChapter \the\chapno}%
2729: \chapmacro {#1}{\the\chapno}%
2730: \gdef\thissection{#1}%
2731: \gdef\thischaptername{#1}%
2732: % We don't substitute the actual chapter name into \thischapter
2733: % because we don't want its macros evaluated now.
2734: \xdef\thischapter{\putwordChapter{} \the\chapno: \noexpand\thischaptername}%
2735: {\chapternofonts%
2736: \edef\temp{{\realbackslash chapentry {#1}{\the\chapno}{\noexpand\folio}}}%
2737: \escapechar=`\\%
2738: \write \contentsfile \temp %
2739: \donoderef %
2740: \global\let\section = \numberedsec
2741: \global\let\subsection = \numberedsubsec
2742: \global\let\subsubsection = \numberedsubsubsec
2743: }}
2744:
2745: \outer\def\appendix{\parsearg\appendixyyy}
2746: \def\appendixyyy #1{\apphead0{#1}} % normally apphead0 calls appendixzzz
2747: \def\appendixzzz #1{\seccheck{appendix}%
2748: \secno=0 \subsecno=0 \subsubsecno=0
2749: \global\advance \appendixno by 1 \message{Appendix \appendixletter}%
2750: \chapmacro {#1}{\putwordAppendix{} \appendixletter}%
2751: \gdef\thissection{#1}%
2752: \gdef\thischaptername{#1}%
2753: \xdef\thischapter{\putwordAppendix{} \appendixletter: \noexpand\thischaptername}%
2754: {\chapternofonts%
2755: \edef\temp{{\realbackslash chapentry
2756: {#1}{\putwordAppendix{} \appendixletter}{\noexpand\folio}}}%
2757: \escapechar=`\\%
2758: \write \contentsfile \temp %
2759: \appendixnoderef %
2760: \global\let\section = \appendixsec
2761: \global\let\subsection = \appendixsubsec
2762: \global\let\subsubsection = \appendixsubsubsec
2763: }}
2764:
2765: % @centerchap is like @unnumbered, but the heading is centered.
2766: \outer\def\centerchap{\parsearg\centerchapyyy}
2767: \def\centerchapyyy #1{{\let\unnumbchapmacro=\centerchapmacro \unnumberedyyy{#1}}}
2768:
2769: \outer\def\top{\parsearg\unnumberedyyy}
2770: \outer\def\unnumbered{\parsearg\unnumberedyyy}
2771: \def\unnumberedyyy #1{\unnmhead0{#1}} % normally unnmhead0 calls unnumberedzzz
2772: \def\unnumberedzzz #1{\seccheck{unnumbered}%
2773: \secno=0 \subsecno=0 \subsubsecno=0
2774: %
2775: % This used to be simply \message{#1}, but TeX fully expands the
2776: % argument to \message. Therefore, if #1 contained @-commands, TeX
2777: % expanded them. For example, in `@unnumbered The @cite{Book}', TeX
2778: % expanded @cite (which turns out to cause errors because \cite is meant
2779: % to be executed, not expanded).
2780: %
2781: % Anyway, we don't want the fully-expanded definition of @cite to appear
2782: % as a result of the \message, we just want `@cite' itself. We use
2783: % \the<toks register> to achieve this: TeX expands \the<toks> only once,
2784: % simply yielding the contents of the <toks register>.
2785: \toks0 = {#1}\message{(\the\toks0)}%
2786: %
2787: \unnumbchapmacro {#1}%
2788: \gdef\thischapter{#1}\gdef\thissection{#1}%
2789: {\chapternofonts%
2790: \edef\temp{{\realbackslash unnumbchapentry {#1}{\noexpand\folio}}}%
2791: \escapechar=`\\%
2792: \write \contentsfile \temp %
2793: \unnumbnoderef %
2794: \global\let\section = \unnumberedsec
2795: \global\let\subsection = \unnumberedsubsec
2796: \global\let\subsubsection = \unnumberedsubsubsec
2797: }}
2798:
2799: \outer\def\numberedsec{\parsearg\secyyy}
2800: \def\secyyy #1{\numhead1{#1}} % normally calls seczzz
2801: \def\seczzz #1{\seccheck{section}%
2802: \subsecno=0 \subsubsecno=0 \global\advance \secno by 1 %
2803: \gdef\thissection{#1}\secheading {#1}{\the\chapno}{\the\secno}%
2804: {\chapternofonts%
2805: \edef\temp{{\realbackslash secentry %
2806: {#1}{\the\chapno}{\the\secno}{\noexpand\folio}}}%
2807: \escapechar=`\\%
2808: \write \contentsfile \temp %
2809: \donoderef %
2810: \penalty 10000 %
2811: }}
2812:
2813: \outer\def\appendixsection{\parsearg\appendixsecyyy}
2814: \outer\def\appendixsec{\parsearg\appendixsecyyy}
2815: \def\appendixsecyyy #1{\apphead1{#1}} % normally calls appendixsectionzzz
2816: \def\appendixsectionzzz #1{\seccheck{appendixsection}%
2817: \subsecno=0 \subsubsecno=0 \global\advance \secno by 1 %
2818: \gdef\thissection{#1}\secheading {#1}{\appendixletter}{\the\secno}%
2819: {\chapternofonts%
2820: \edef\temp{{\realbackslash secentry %
2821: {#1}{\appendixletter}{\the\secno}{\noexpand\folio}}}%
2822: \escapechar=`\\%
2823: \write \contentsfile \temp %
2824: \appendixnoderef %
2825: \penalty 10000 %
2826: }}
2827:
2828: \outer\def\unnumberedsec{\parsearg\unnumberedsecyyy}
2829: \def\unnumberedsecyyy #1{\unnmhead1{#1}} % normally calls unnumberedseczzz
2830: \def\unnumberedseczzz #1{\seccheck{unnumberedsec}%
2831: \plainsecheading {#1}\gdef\thissection{#1}%
2832: {\chapternofonts%
2833: \edef\temp{{\realbackslash unnumbsecentry{#1}{\noexpand\folio}}}%
2834: \escapechar=`\\%
2835: \write \contentsfile \temp %
2836: \unnumbnoderef %
2837: \penalty 10000 %
2838: }}
2839:
2840: \outer\def\numberedsubsec{\parsearg\numberedsubsecyyy}
2841: \def\numberedsubsecyyy #1{\numhead2{#1}} % normally calls numberedsubseczzz
2842: \def\numberedsubseczzz #1{\seccheck{subsection}%
2843: \gdef\thissection{#1}\subsubsecno=0 \global\advance \subsecno by 1 %
2844: \subsecheading {#1}{\the\chapno}{\the\secno}{\the\subsecno}%
2845: {\chapternofonts%
2846: \edef\temp{{\realbackslash subsecentry %
2847: {#1}{\the\chapno}{\the\secno}{\the\subsecno}{\noexpand\folio}}}%
2848: \escapechar=`\\%
2849: \write \contentsfile \temp %
2850: \donoderef %
2851: \penalty 10000 %
2852: }}
2853:
2854: \outer\def\appendixsubsec{\parsearg\appendixsubsecyyy}
2855: \def\appendixsubsecyyy #1{\apphead2{#1}} % normally calls appendixsubseczzz
2856: \def\appendixsubseczzz #1{\seccheck{appendixsubsec}%
2857: \gdef\thissection{#1}\subsubsecno=0 \global\advance \subsecno by 1 %
2858: \subsecheading {#1}{\appendixletter}{\the\secno}{\the\subsecno}%
2859: {\chapternofonts%
2860: \edef\temp{{\realbackslash subsecentry %
2861: {#1}{\appendixletter}{\the\secno}{\the\subsecno}{\noexpand\folio}}}%
2862: \escapechar=`\\%
2863: \write \contentsfile \temp %
2864: \appendixnoderef %
2865: \penalty 10000 %
2866: }}
2867:
2868: \outer\def\unnumberedsubsec{\parsearg\unnumberedsubsecyyy}
2869: \def\unnumberedsubsecyyy #1{\unnmhead2{#1}} %normally calls unnumberedsubseczzz
2870: \def\unnumberedsubseczzz #1{\seccheck{unnumberedsubsec}%
2871: \plainsubsecheading {#1}\gdef\thissection{#1}%
2872: {\chapternofonts%
2873: \edef\temp{{\realbackslash unnumbsubsecentry{#1}{\noexpand\folio}}}%
2874: \escapechar=`\\%
2875: \write \contentsfile \temp %
2876: \unnumbnoderef %
2877: \penalty 10000 %
2878: }}
2879:
2880: \outer\def\numberedsubsubsec{\parsearg\numberedsubsubsecyyy}
2881: \def\numberedsubsubsecyyy #1{\numhead3{#1}} % normally numberedsubsubseczzz
2882: \def\numberedsubsubseczzz #1{\seccheck{subsubsection}%
2883: \gdef\thissection{#1}\global\advance \subsubsecno by 1 %
2884: \subsubsecheading {#1}
2885: {\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}%
2886: {\chapternofonts%
2887: \edef\temp{{\realbackslash subsubsecentry %
2888: {#1}
2889: {\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}
2890: {\noexpand\folio}}}%
2891: \escapechar=`\\%
2892: \write \contentsfile \temp %
2893: \donoderef %
2894: \penalty 10000 %
2895: }}
2896:
2897: \outer\def\appendixsubsubsec{\parsearg\appendixsubsubsecyyy}
2898: \def\appendixsubsubsecyyy #1{\apphead3{#1}} % normally appendixsubsubseczzz
2899: \def\appendixsubsubseczzz #1{\seccheck{appendixsubsubsec}%
2900: \gdef\thissection{#1}\global\advance \subsubsecno by 1 %
2901: \subsubsecheading {#1}
2902: {\appendixletter}{\the\secno}{\the\subsecno}{\the\subsubsecno}%
2903: {\chapternofonts%
2904: \edef\temp{{\realbackslash subsubsecentry{#1}%
2905: {\appendixletter}
2906: {\the\secno}{\the\subsecno}{\the\subsubsecno}{\noexpand\folio}}}%
2907: \escapechar=`\\%
2908: \write \contentsfile \temp %
2909: \appendixnoderef %
2910: \penalty 10000 %
2911: }}
2912:
2913: \outer\def\unnumberedsubsubsec{\parsearg\unnumberedsubsubsecyyy}
2914: \def\unnumberedsubsubsecyyy #1{\unnmhead3{#1}} %normally unnumberedsubsubseczzz
2915: \def\unnumberedsubsubseczzz #1{\seccheck{unnumberedsubsubsec}%
2916: \plainsubsubsecheading {#1}\gdef\thissection{#1}%
2917: {\chapternofonts%
2918: \edef\temp{{\realbackslash unnumbsubsubsecentry{#1}{\noexpand\folio}}}%
2919: \escapechar=`\\%
2920: \write \contentsfile \temp %
2921: \unnumbnoderef %
2922: \penalty 10000 %
2923: }}
2924:
2925: % These are variants which are not "outer", so they can appear in @ifinfo.
2926: % Actually, they should now be obsolete; ordinary section commands should work.
2927: \def\infotop{\parsearg\unnumberedzzz}
2928: \def\infounnumbered{\parsearg\unnumberedzzz}
2929: \def\infounnumberedsec{\parsearg\unnumberedseczzz}
2930: \def\infounnumberedsubsec{\parsearg\unnumberedsubseczzz}
2931: \def\infounnumberedsubsubsec{\parsearg\unnumberedsubsubseczzz}
2932:
2933: \def\infoappendix{\parsearg\appendixzzz}
2934: \def\infoappendixsec{\parsearg\appendixseczzz}
2935: \def\infoappendixsubsec{\parsearg\appendixsubseczzz}
2936: \def\infoappendixsubsubsec{\parsearg\appendixsubsubseczzz}
2937:
2938: \def\infochapter{\parsearg\chapterzzz}
2939: \def\infosection{\parsearg\sectionzzz}
2940: \def\infosubsection{\parsearg\subsectionzzz}
2941: \def\infosubsubsection{\parsearg\subsubsectionzzz}
2942:
2943: % These macros control what the section commands do, according
2944: % to what kind of chapter we are in (ordinary, appendix, or unnumbered).
2945: % Define them by default for a numbered chapter.
2946: \global\let\section = \numberedsec
2947: \global\let\subsection = \numberedsubsec
2948: \global\let\subsubsection = \numberedsubsubsec
2949:
2950: % Define @majorheading, @heading and @subheading
2951:
2952: % NOTE on use of \vbox for chapter headings, section headings, and
2953: % such:
2954: % 1) We use \vbox rather than the earlier \line to permit
2955: % overlong headings to fold.
2956: % 2) \hyphenpenalty is set to 10000 because hyphenation in a
2957: % heading is obnoxious; this forbids it.
2958: % 3) Likewise, headings look best if no \parindent is used, and
2959: % if justification is not attempted. Hence \raggedright.
2960:
2961:
2962: \def\majorheading{\parsearg\majorheadingzzz}
2963: \def\majorheadingzzz #1{%
2964: {\advance\chapheadingskip by 10pt \chapbreak }%
2965: {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
2966: \parindent=0pt\raggedright
2967: \rm #1\hfill}}\bigskip \par\penalty 200}
2968:
2969: \def\chapheading{\parsearg\chapheadingzzz}
2970: \def\chapheadingzzz #1{\chapbreak %
2971: {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
2972: \parindent=0pt\raggedright
2973: \rm #1\hfill}}\bigskip \par\penalty 200}
2974:
2975: % @heading, @subheading, @subsubheading.
2976: \def\heading{\parsearg\plainsecheading}
2977: \def\subheading{\parsearg\plainsubsecheading}
2978: \def\subsubheading{\parsearg\plainsubsubsecheading}
2979:
2980: % These macros generate a chapter, section, etc. heading only
2981: % (including whitespace, linebreaking, etc. around it),
2982: % given all the information in convenient, parsed form.
2983:
2984: %%% Args are the skip and penalty (usually negative)
2985: \def\dobreak#1#2{\par\ifdim\lastskip<#1\removelastskip\penalty#2\vskip#1\fi}
2986:
2987: \def\setchapterstyle #1 {\csname CHAPF#1\endcsname}
2988:
2989: %%% Define plain chapter starts, and page on/off switching for it
2990: % Parameter controlling skip before chapter headings (if needed)
2991:
2992: \newskip\chapheadingskip
2993:
2994: \def\chapbreak{\dobreak \chapheadingskip {-4000}}
2995: \def\chappager{\par\vfill\supereject}
2996: \def\chapoddpage{\chappager \ifodd\pageno \else \hbox to 0pt{} \chappager\fi}
2997:
2998: \def\setchapternewpage #1 {\csname CHAPPAG#1\endcsname}
2999:
3000: \def\CHAPPAGoff{
3001: \global\let\contentsalignmacro = \chappager
3002: \global\let\pchapsepmacro=\chapbreak
3003: \global\let\pagealignmacro=\chappager}
3004:
3005: \def\CHAPPAGon{
3006: \global\let\contentsalignmacro = \chappager
3007: \global\let\pchapsepmacro=\chappager
3008: \global\let\pagealignmacro=\chappager
3009: \global\def\HEADINGSon{\HEADINGSsingle}}
3010:
3011: \def\CHAPPAGodd{
3012: \global\let\contentsalignmacro = \chapoddpage
3013: \global\let\pchapsepmacro=\chapoddpage
3014: \global\let\pagealignmacro=\chapoddpage
3015: \global\def\HEADINGSon{\HEADINGSdouble}}
3016:
3017: \CHAPPAGon
3018:
3019: \def\CHAPFplain{
3020: \global\let\chapmacro=\chfplain
3021: \global\let\unnumbchapmacro=\unnchfplain
3022: \global\let\centerchapmacro=\centerchfplain}
3023:
3024: % Plain chapter opening.
3025: % #1 is the text, #2 the chapter number or empty if unnumbered.
3026: \def\chfplain#1#2{%
3027: \pchapsepmacro
3028: {%
3029: \chapfonts \rm
3030: \def\chapnum{#2}%
3031: \setbox0 = \hbox{#2\ifx\chapnum\empty\else\enspace\fi}%
3032: \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright
3033: \hangindent = \wd0 \centerparametersmaybe
3034: \unhbox0 #1\par}%
3035: }%
3036: \nobreak\bigskip % no page break after a chapter title
3037: \nobreak
3038: }
3039:
3040: % Plain opening for unnumbered.
3041: \def\unnchfplain#1{\chfplain{#1}{}}
3042:
3043: % @centerchap -- centered and unnumbered.
3044: \let\centerparametersmaybe = \relax
3045: \def\centerchfplain#1{{%
3046: \def\centerparametersmaybe{%
3047: \advance\rightskip by 3\rightskip
3048: \leftskip = \rightskip
3049: \parfillskip = 0pt
3050: }%
3051: \chfplain{#1}{}%
3052: }}
3053:
3054: \CHAPFplain % The default
3055:
3056: \def\unnchfopen #1{%
3057: \chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
3058: \parindent=0pt\raggedright
3059: \rm #1\hfill}}\bigskip \par\penalty 10000 %
3060: }
3061:
3062: \def\chfopen #1#2{\chapoddpage {\chapfonts
3063: \vbox to 3in{\vfil \hbox to\hsize{\hfil #2} \hbox to\hsize{\hfil #1} \vfil}}%
3064: \par\penalty 5000 %
3065: }
3066:
3067: \def\centerchfopen #1{%
3068: \chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
3069: \parindent=0pt
3070: \hfill {\rm #1}\hfill}}\bigskip \par\penalty 10000 %
3071: }
3072:
3073: \def\CHAPFopen{
3074: \global\let\chapmacro=\chfopen
3075: \global\let\unnumbchapmacro=\unnchfopen
3076: \global\let\centerchapmacro=\centerchfopen}
3077:
3078:
3079: % Section titles.
3080: \newskip\secheadingskip
3081: \def\secheadingbreak{\dobreak \secheadingskip {-1000}}
3082: \def\secheading#1#2#3{\sectionheading{sec}{#2.#3}{#1}}
3083: \def\plainsecheading#1{\sectionheading{sec}{}{#1}}
3084:
3085: % Subsection titles.
3086: \newskip \subsecheadingskip
3087: \def\subsecheadingbreak{\dobreak \subsecheadingskip {-500}}
3088: \def\subsecheading#1#2#3#4{\sectionheading{subsec}{#2.#3.#4}{#1}}
3089: \def\plainsubsecheading#1{\sectionheading{subsec}{}{#1}}
3090:
3091: % Subsubsection titles.
3092: \let\subsubsecheadingskip = \subsecheadingskip
3093: \let\subsubsecheadingbreak = \subsecheadingbreak
3094: \def\subsubsecheading#1#2#3#4#5{\sectionheading{subsubsec}{#2.#3.#4.#5}{#1}}
3095: \def\plainsubsubsecheading#1{\sectionheading{subsubsec}{}{#1}}
3096:
3097:
3098: % Print any size section title.
3099: %
3100: % #1 is the section type (sec/subsec/subsubsec), #2 is the section
3101: % number (maybe empty), #3 the text.
3102: \def\sectionheading#1#2#3{%
3103: {%
3104: \expandafter\advance\csname #1headingskip\endcsname by \parskip
3105: \csname #1headingbreak\endcsname
3106: }%
3107: {%
3108: % Switch to the right set of fonts.
3109: \csname #1fonts\endcsname \rm
3110: %
3111: % Only insert the separating space if we have a section number.
3112: \def\secnum{#2}%
3113: \setbox0 = \hbox{#2\ifx\secnum\empty\else\enspace\fi}%
3114: %
3115: \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright
3116: \hangindent = \wd0 % zero if no section number
3117: \unhbox0 #3}%
3118: }%
3119: \ifdim\parskip<10pt \nobreak\kern10pt\nobreak\kern-\parskip\fi \nobreak
3120: }
3121:
3122:
3123: \message{toc printing,}
3124: % Finish up the main text and prepare to read what we've written
3125: % to \contentsfile.
3126:
3127: \newskip\contentsrightmargin \contentsrightmargin=1in
3128: \def\startcontents#1{%
3129: % If @setchapternewpage on, and @headings double, the contents should
3130: % start on an odd page, unlike chapters. Thus, we maintain
3131: % \contentsalignmacro in parallel with \pagealignmacro.
3132: % From: Torbjorn Granlund <tege@matematik.su.se>
3133: \contentsalignmacro
3134: \immediate\closeout \contentsfile
3135: \ifnum \pageno>0
3136: \pageno = -1 % Request roman numbered pages.
3137: \fi
3138: % Don't need to put `Contents' or `Short Contents' in the headline.
3139: % It is abundantly clear what they are.
3140: \unnumbchapmacro{#1}\def\thischapter{}%
3141: \begingroup % Set up to handle contents files properly.
3142: \catcode`\\=0 \catcode`\{=1 \catcode`\}=2 \catcode`\@=11
3143: \catcode`\^=7 % to see ^^e4 as \"a etc. juha@piuha.ydi.vtt.fi
3144: \raggedbottom % Worry more about breakpoints than the bottom.
3145: \advance\hsize by -\contentsrightmargin % Don't use the full line length.
3146: }
3147:
3148:
3149: % Normal (long) toc.
3150: \outer\def\contents{%
3151: \startcontents{\putwordTableofContents}%
3152: \input \jobname.toc
3153: \endgroup
3154: \vfill \eject
3155: }
3156:
3157: % And just the chapters.
3158: \outer\def\summarycontents{%
3159: \startcontents{\putwordShortContents}%
3160: %
3161: \let\chapentry = \shortchapentry
3162: \let\unnumbchapentry = \shortunnumberedentry
3163: % We want a true roman here for the page numbers.
3164: \secfonts
3165: \let\rm=\shortcontrm \let\bf=\shortcontbf \let\sl=\shortcontsl
3166: \rm
3167: \hyphenpenalty = 10000
3168: \advance\baselineskip by 1pt % Open it up a little.
3169: \def\secentry ##1##2##3##4{}
3170: \def\unnumbsecentry ##1##2{}
3171: \def\subsecentry ##1##2##3##4##5{}
3172: \def\unnumbsubsecentry ##1##2{}
3173: \def\subsubsecentry ##1##2##3##4##5##6{}
3174: \def\unnumbsubsubsecentry ##1##2{}
3175: \input \jobname.toc
3176: \endgroup
3177: \vfill \eject
3178: }
3179: \let\shortcontents = \summarycontents
3180:
3181: % These macros generate individual entries in the table of contents.
3182: % The first argument is the chapter or section name.
3183: % The last argument is the page number.
3184: % The arguments in between are the chapter number, section number, ...
3185:
3186: % Chapter-level things, for both the long and short contents.
3187: \def\chapentry#1#2#3{\dochapentry{#2\labelspace#1}{#3}}
3188:
3189: % See comments in \dochapentry re vbox and related settings
3190: \def\shortchapentry#1#2#3{%
3191: \tocentry{\shortchaplabel{#2}\labelspace #1}{\doshortpageno{#3}}%
3192: }
3193:
3194: % Typeset the label for a chapter or appendix for the short contents.
3195: % The arg is, e.g. `Appendix A' for an appendix, or `3' for a chapter.
3196: % We could simplify the code here by writing out an \appendixentry
3197: % command in the toc file for appendices, instead of using \chapentry
3198: % for both, but it doesn't seem worth it.
3199: \setbox0 = \hbox{\shortcontrm \putwordAppendix }
3200: \newdimen\shortappendixwidth \shortappendixwidth = \wd0
3201:
3202: \def\shortchaplabel#1{%
3203: % We typeset #1 in a box of constant width, regardless of the text of
3204: % #1, so the chapter titles will come out aligned.
3205: \setbox0 = \hbox{#1}%
3206: \dimen0 = \ifdim\wd0 > \shortappendixwidth \shortappendixwidth \else 0pt \fi
3207: %
3208: % This space should be plenty, since a single number is .5em, and the
3209: % widest letter (M) is 1em, at least in the Computer Modern fonts.
3210: % (This space doesn't include the extra space that gets added after
3211: % the label; that gets put in by \shortchapentry above.)
3212: \advance\dimen0 by 1.1em
3213: \hbox to \dimen0{#1\hfil}%
3214: }
3215:
3216: \def\unnumbchapentry#1#2{\dochapentry{#1}{#2}}
3217: \def\shortunnumberedentry#1#2{\tocentry{#1}{\doshortpageno{#2}}}
3218:
3219: % Sections.
3220: \def\secentry#1#2#3#4{\dosecentry{#2.#3\labelspace#1}{#4}}
3221: \def\unnumbsecentry#1#2{\dosecentry{#1}{#2}}
3222:
3223: % Subsections.
3224: \def\subsecentry#1#2#3#4#5{\dosubsecentry{#2.#3.#4\labelspace#1}{#5}}
3225: \def\unnumbsubsecentry#1#2{\dosubsecentry{#1}{#2}}
3226:
3227: % And subsubsections.
3228: \def\subsubsecentry#1#2#3#4#5#6{%
3229: \dosubsubsecentry{#2.#3.#4.#5\labelspace#1}{#6}}
3230: \def\unnumbsubsubsecentry#1#2{\dosubsubsecentry{#1}{#2}}
3231:
3232: % This parameter controls the indentation of the various levels.
3233: \newdimen\tocindent \tocindent = 3pc
3234:
3235: % Now for the actual typesetting. In all these, #1 is the text and #2 is the
3236: % page number.
3237: %
3238: % If the toc has to be broken over pages, we want it to be at chapters
3239: % if at all possible; hence the \penalty.
3240: \def\dochapentry#1#2{%
3241: \penalty-300 \vskip1\baselineskip plus.33\baselineskip minus.25\baselineskip
3242: \begingroup
3243: \chapentryfonts
3244: \tocentry{#1}{\dopageno{#2}}%
3245: \endgroup
3246: \nobreak\vskip .25\baselineskip plus.1\baselineskip
3247: }
3248:
3249: \def\dosecentry#1#2{\begingroup
3250: \secentryfonts \leftskip=\tocindent
3251: \tocentry{#1}{\dopageno{#2}}%
3252: \endgroup}
3253:
3254: \def\dosubsecentry#1#2{\begingroup
3255: \subsecentryfonts \leftskip=2\tocindent
3256: \tocentry{#1}{\dopageno{#2}}%
3257: \endgroup}
3258:
3259: \def\dosubsubsecentry#1#2{\begingroup
3260: \subsubsecentryfonts \leftskip=3\tocindent
3261: \tocentry{#1}{\dopageno{#2}}%
3262: \endgroup}
3263:
3264: % Final typesetting of a toc entry; we use the same \entry macro as for
3265: % the index entries, but we want to suppress hyphenation here. (We
3266: % can't do that in the \entry macro, since index entries might consist
3267: % of hyphenated-identifiers-that-do-not-fit-on-a-line-and-nothing-else.)
3268: %
3269: % \turnoffactive is for the sake of @" used for umlauts.
3270: \def\tocentry#1#2{\begingroup
3271: \vskip 0pt plus1pt % allow a little stretch for the sake of nice page breaks
3272: \entry{\turnoffactive #1}{\turnoffactive #2}%
3273: \endgroup}
3274:
3275: % Space between chapter (or whatever) number and the title.
3276: \def\labelspace{\hskip1em \relax}
3277:
3278: \def\dopageno#1{{\rm #1}}
3279: \def\doshortpageno#1{{\rm #1}}
3280:
3281: \def\chapentryfonts{\secfonts \rm}
3282: \def\secentryfonts{\textfonts}
3283: \let\subsecentryfonts = \textfonts
3284: \let\subsubsecentryfonts = \textfonts
3285:
3286:
3287: \message{environments,}
3288:
3289: % Since these characters are used in examples, it should be an even number of
3290: % \tt widths. Each \tt character is 1en, so two makes it 1em.
3291: % Furthermore, these definitions must come after we define our fonts.
3292: \newbox\dblarrowbox \newbox\longdblarrowbox
3293: \newbox\pushcharbox \newbox\bullbox
3294: \newbox\equivbox \newbox\errorbox
3295:
3296: %{\tentt
3297: %\global\setbox\dblarrowbox = \hbox to 1em{\hfil$\Rightarrow$\hfil}
3298: %\global\setbox\longdblarrowbox = \hbox to 1em{\hfil$\mapsto$\hfil}
3299: %\global\setbox\pushcharbox = \hbox to 1em{\hfil$\dashv$\hfil}
3300: %\global\setbox\equivbox = \hbox to 1em{\hfil$\ptexequiv$\hfil}
3301: % Adapted from the manmac format (p.420 of TeXbook)
3302: %\global\setbox\bullbox = \hbox to 1em{\kern.15em\vrule height .75ex width .85ex
3303: % depth .1ex\hfil}
3304: %}
3305:
3306: % @point{}, @result{}, @expansion{}, @print{}, @equiv{}.
3307: \def\point{$\star$}
3308: \def\result{\leavevmode\raise.15ex\hbox to 1em{\hfil$\Rightarrow$\hfil}}
3309: \def\expansion{\leavevmode\raise.1ex\hbox to 1em{\hfil$\mapsto$\hfil}}
3310: \def\print{\leavevmode\lower.1ex\hbox to 1em{\hfil$\dashv$\hfil}}
3311: \def\equiv{\leavevmode\lower.1ex\hbox to 1em{\hfil$\ptexequiv$\hfil}}
3312:
3313: % Adapted from the TeXbook's \boxit.
3314: {\tentt \global\dimen0 = 3em}% Width of the box.
3315: \dimen2 = .55pt % Thickness of rules
3316: % The text. (`r' is open on the right, `e' somewhat less so on the left.)
3317: \setbox0 = \hbox{\kern-.75pt \tensf error\kern-1.5pt}
3318:
3319: \global\setbox\errorbox=\hbox to \dimen0{\hfil
3320: \hsize = \dimen0 \advance\hsize by -5.8pt % Space to left+right.
3321: \advance\hsize by -2\dimen2 % Rules.
3322: \vbox{
3323: \hrule height\dimen2
3324: \hbox{\vrule width\dimen2 \kern3pt % Space to left of text.
3325: \vtop{\kern2.4pt \box0 \kern2.4pt}% Space above/below.
3326: \kern3pt\vrule width\dimen2}% Space to right.
3327: \hrule height\dimen2}
3328: \hfil}
3329:
3330: % The @error{} command.
3331: \def\error{\leavevmode\lower.7ex\copy\errorbox}
3332:
3333: % @tex ... @end tex escapes into raw Tex temporarily.
3334: % One exception: @ is still an escape character, so that @end tex works.
3335: % But \@ or @@ will get a plain tex @ character.
3336:
3337: \def\tex{\begingroup
3338: \catcode `\\=0 \catcode `\{=1 \catcode `\}=2
3339: \catcode `\$=3 \catcode `\&=4 \catcode `\#=6
3340: \catcode `\^=7 \catcode `\_=8 \catcode `\~=13 \let~=\tie
3341: \catcode `\%=14
3342: \catcode 43=12 % plus
3343: \catcode`\"=12
3344: \catcode`\==12
3345: \catcode`\|=12
3346: \catcode`\<=12
3347: \catcode`\>=12
3348: \escapechar=`\\
3349: %
3350: \let\,=\ptexcomma
3351: \let\~=\ptextilde
3352: \let\{=\ptexlbrace
3353: \let\}=\ptexrbrace
3354: \let\.=\ptexdot
3355: \let\*=\ptexstar
3356: \let\dots=\ptexdots
3357: \def\endldots{\mathinner{\ldots\ldots\ldots\ldots}}
3358: \def\enddots{\relax\ifmmode\endldots\else$\mathsurround=0pt \endldots\,$\fi}
3359: \def\@{@}%
3360: \let\bullet=\ptexbullet
3361: \let\b=\ptexb \let\c=\ptexc \let\i=\ptexi \let\t=\ptext
3362: %
3363: \let\Etex=\endgroup}
3364:
3365: % Define @lisp ... @endlisp.
3366: % @lisp does a \begingroup so it can rebind things,
3367: % including the definition of @endlisp (which normally is erroneous).
3368:
3369: % Amount to narrow the margins by for @lisp.
3370: \newskip\lispnarrowing \lispnarrowing=0.4in
3371:
3372: % This is the definition that ^^M gets inside @lisp, @example, and other
3373: % such environments. \null is better than a space, since it doesn't
3374: % have any width.
3375: \def\lisppar{\null\endgraf}
3376:
3377: % Make each space character in the input produce a normal interword
3378: % space in the output. Don't allow a line break at this space, as this
3379: % is used only in environments like @example, where each line of input
3380: % should produce a line of output anyway.
3381: %
3382: {\obeyspaces %
3383: \gdef\sepspaces{\obeyspaces\let =\tie}}
3384:
3385: % Define \obeyedspace to be our active space, whatever it is. This is
3386: % for use in \parsearg.
3387: {\sepspaces%
3388: \global\let\obeyedspace= }
3389:
3390: % This space is always present above and below environments.
3391: \newskip\envskipamount \envskipamount = 0pt
3392:
3393: % Make spacing and below environment symmetrical. We use \parskip here
3394: % to help in doing that, since in @example-like environments \parskip
3395: % is reset to zero; thus the \afterenvbreak inserts no space -- but the
3396: % start of the next paragraph will insert \parskip
3397: %
3398: \def\aboveenvbreak{{\advance\envskipamount by \parskip
3399: \endgraf \ifdim\lastskip<\envskipamount
3400: \removelastskip \penalty-50 \vskip\envskipamount \fi}}
3401:
3402: \let\afterenvbreak = \aboveenvbreak
3403:
3404: % \nonarrowing is a flag. If "set", @lisp etc don't narrow margins.
3405: \let\nonarrowing=\relax
3406:
3407: %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
3408: % \cartouche: draw rectangle w/rounded corners around argument
3409: \font\circle=lcircle10
3410: \newdimen\circthick
3411: \newdimen\cartouter\newdimen\cartinner
3412: \newskip\normbskip\newskip\normpskip\newskip\normlskip
3413: \circthick=\fontdimen8\circle
3414: %
3415: \def\ctl{{\circle\char'013\hskip -6pt}}% 6pt from pl file: 1/2charwidth
3416: \def\ctr{{\hskip 6pt\circle\char'010}}
3417: \def\cbl{{\circle\char'012\hskip -6pt}}
3418: \def\cbr{{\hskip 6pt\circle\char'011}}
3419: \def\carttop{\hbox to \cartouter{\hskip\lskip
3420: \ctl\leaders\hrule height\circthick\hfil\ctr
3421: \hskip\rskip}}
3422: \def\cartbot{\hbox to \cartouter{\hskip\lskip
3423: \cbl\leaders\hrule height\circthick\hfil\cbr
3424: \hskip\rskip}}
3425: %
3426: \newskip\lskip\newskip\rskip
3427:
3428: \long\def\cartouche{%
3429: \begingroup
3430: \lskip=\leftskip \rskip=\rightskip
3431: \leftskip=0pt\rightskip=0pt %we want these *outside*.
3432: \cartinner=\hsize \advance\cartinner by-\lskip
3433: \advance\cartinner by-\rskip
3434: \cartouter=\hsize
3435: \advance\cartouter by 18pt % allow for 3pt kerns on either
3436: % side, and for 6pt waste from
3437: % each corner char
3438: \normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip
3439: % Flag to tell @lisp, etc., not to narrow margin.
3440: \let\nonarrowing=\comment
3441: \vbox\bgroup
3442: \baselineskip=0pt\parskip=0pt\lineskip=0pt
3443: \carttop
3444: \hbox\bgroup
3445: \hskip\lskip
3446: \vrule\kern3pt
3447: \vbox\bgroup
3448: \hsize=\cartinner
3449: \kern3pt
3450: \begingroup
3451: \baselineskip=\normbskip
3452: \lineskip=\normlskip
3453: \parskip=\normpskip
3454: \vskip -\parskip
3455: \def\Ecartouche{%
3456: \endgroup
3457: \kern3pt
3458: \egroup
3459: \kern3pt\vrule
3460: \hskip\rskip
3461: \egroup
3462: \cartbot
3463: \egroup
3464: \endgroup
3465: }}
3466:
3467:
3468: % This macro is called at the beginning of all the @example variants,
3469: % inside a group.
3470: \def\nonfillstart{%
3471: \aboveenvbreak
3472: \inENV % This group ends at the end of the body
3473: \hfuzz = 12pt % Don't be fussy
3474: \sepspaces % Make spaces be word-separators rather than space tokens.
3475: \singlespace
3476: \let\par = \lisppar % don't ignore blank lines
3477: \obeylines % each line of input is a line of output
3478: \parskip = 0pt
3479: \parindent = 0pt
3480: \emergencystretch = 0pt % don't try to avoid overfull boxes
3481: % @cartouche defines \nonarrowing to inhibit narrowing
3482: % at next level down.
3483: \ifx\nonarrowing\relax
3484: \advance \leftskip by \lispnarrowing
3485: \exdentamount=\lispnarrowing
3486: \let\exdent=\nofillexdent
3487: \let\nonarrowing=\relax
3488: \fi
3489: }
3490:
3491: % To ending an @example-like environment, we first end the paragraph
3492: % (via \afterenvbreak's vertical glue), and then the group. That way we
3493: % keep the zero \parskip that the environments set -- \parskip glue
3494: % will be inserted at the beginning of the next paragraph in the
3495: % document, after the environment.
3496: %
3497: \def\nonfillfinish{\afterenvbreak\endgroup}%
3498:
3499: % This macro is
3500: \def\lisp{\begingroup
3501: \nonfillstart
3502: \let\Elisp = \nonfillfinish
3503: \tt
3504: \rawbackslash % have \ input char produce \ char from current font
3505: \gobble
3506: }
3507:
3508: % Define the \E... control sequence only if we are inside the
3509: % environment, so the error checking in \end will work.
3510: %
3511: % We must call \lisp last in the definition, since it reads the
3512: % return following the @example (or whatever) command.
3513: %
3514: \def\example{\begingroup \def\Eexample{\nonfillfinish\endgroup}\lisp}
3515: \def\smallexample{\begingroup \def\Esmallexample{\nonfillfinish\endgroup}\lisp}
3516: \def\smalllisp{\begingroup \def\Esmalllisp{\nonfillfinish\endgroup}\lisp}
3517:
3518: % @smallexample and @smalllisp. This is not used unless the @smallbook
3519: % command is given. Originally contributed by Pavel@xerox.
3520: %
3521: \def\smalllispx{\begingroup
3522: \nonfillstart
3523: \let\Esmalllisp = \nonfillfinish
3524: \let\Esmallexample = \nonfillfinish
3525: %
3526: % Smaller fonts for small examples.
3527: \indexfonts \tt
3528: \rawbackslash % make \ output the \ character from the current font (tt)
3529: \gobble
3530: }
3531:
3532: % This is @display; same as @lisp except use roman font.
3533: %
3534: \def\display{\begingroup
3535: \nonfillstart
3536: \let\Edisplay = \nonfillfinish
3537: \gobble
3538: }
3539:
3540: % This is @format; same as @display except don't narrow margins.
3541: %
3542: \def\format{\begingroup
3543: \let\nonarrowing = t
3544: \nonfillstart
3545: \let\Eformat = \nonfillfinish
3546: \gobble
3547: }
3548:
3549: % @flushleft (same as @format) and @flushright.
3550: %
3551: \def\flushleft{\begingroup
3552: \let\nonarrowing = t
3553: \nonfillstart
3554: \let\Eflushleft = \nonfillfinish
3555: \gobble
3556: }
3557: \def\flushright{\begingroup
3558: \let\nonarrowing = t
3559: \nonfillstart
3560: \let\Eflushright = \nonfillfinish
3561: \advance\leftskip by 0pt plus 1fill
3562: \gobble}
3563:
3564: % @quotation does normal linebreaking (hence we can't use \nonfillstart)
3565: % and narrows the margins.
3566: %
3567: \def\quotation{%
3568: \begingroup\inENV %This group ends at the end of the @quotation body
3569: {\parskip=0pt \aboveenvbreak}% because \aboveenvbreak inserts \parskip
3570: \singlespace
3571: \parindent=0pt
3572: % We have retained a nonzero parskip for the environment, since we're
3573: % doing normal filling. So to avoid extra space below the environment...
3574: \def\Equotation{\parskip = 0pt \nonfillfinish}%
3575: %
3576: % @cartouche defines \nonarrowing to inhibit narrowing at next level down.
3577: \ifx\nonarrowing\relax
3578: \advance\leftskip by \lispnarrowing
3579: \advance\rightskip by \lispnarrowing
3580: \exdentamount = \lispnarrowing
3581: \let\nonarrowing = \relax
3582: \fi
3583: }
3584:
3585: \message{defuns,}
3586: % Define formatter for defuns
3587: % First, allow user to change definition object font (\df) internally
3588: \def\setdeffont #1 {\csname DEF#1\endcsname}
3589:
3590: \newskip\defbodyindent \defbodyindent=.4in
3591: \newskip\defargsindent \defargsindent=50pt
3592: \newskip\deftypemargin \deftypemargin=12pt
3593: \newskip\deflastargmargin \deflastargmargin=18pt
3594:
3595: \newcount\parencount
3596: % define \functionparens, which makes ( and ) and & do special things.
3597: % \functionparens affects the group it is contained in.
3598: \def\activeparens{%
3599: \catcode`\(=\active \catcode`\)=\active \catcode`\&=\active
3600: \catcode`\[=\active \catcode`\]=\active}
3601:
3602: % Make control sequences which act like normal parenthesis chars.
3603: \let\lparen = ( \let\rparen = )
3604:
3605: {\activeparens % Now, smart parens don't turn on until &foo (see \amprm)
3606:
3607: % Be sure that we always have a definition for `(', etc. For example,
3608: % if the fn name has parens in it, \boldbrax will not be in effect yet,
3609: % so TeX would otherwise complain about undefined control sequence.
3610: \global\let(=\lparen \global\let)=\rparen
3611: \global\let[=\lbrack \global\let]=\rbrack
3612:
3613: \gdef\functionparens{\boldbrax\let&=\amprm\parencount=0 }
3614: \gdef\boldbrax{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb}
3615: % This is used to turn on special parens
3616: % but make & act ordinary (given that it's active).
3617: \gdef\boldbraxnoamp{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb\let&=\ampnr}
3618:
3619: % Definitions of (, ) and & used in args for functions.
3620: % This is the definition of ( outside of all parentheses.
3621: \gdef\oprm#1 {{\rm\char`\(}#1 \bf \let(=\opnested %
3622: \global\advance\parencount by 1 }
3623: %
3624: % This is the definition of ( when already inside a level of parens.
3625: \gdef\opnested{\char`\(\global\advance\parencount by 1 }
3626: %
3627: \gdef\clrm{% Print a paren in roman if it is taking us back to depth of 0.
3628: % also in that case restore the outer-level definition of (.
3629: \ifnum \parencount=1 {\rm \char `\)}\sl \let(=\oprm \else \char `\) \fi
3630: \global\advance \parencount by -1 }
3631: % If we encounter &foo, then turn on ()-hacking afterwards
3632: \gdef\amprm#1 {{\rm\}\let(=\oprm \let)=\clrm\ }
3633: %
3634: \gdef\normalparens{\boldbrax\let&=\ampnr}
3635: } % End of definition inside \activeparens
3636: %% These parens (in \boldbrax) actually are a little bolder than the
3637: %% contained text. This is especially needed for [ and ]
3638: \def\opnr{{\sf\char`\(}} \def\clnr{{\sf\char`\)}} \def\ampnr{\&}
3639: \def\lbrb{{\bf\char`\[}} \def\rbrb{{\bf\char`\]}}
3640:
3641: % First, defname, which formats the header line itself.
3642: % #1 should be the function name.
3643: % #2 should be the type of definition, such as "Function".
3644:
3645: \def\defname #1#2{%
3646: % Get the values of \leftskip and \rightskip as they were
3647: % outside the @def...
3648: \dimen2=\leftskip
3649: \advance\dimen2 by -\defbodyindent
3650: \dimen3=\rightskip
3651: \advance\dimen3 by -\defbodyindent
3652: \noindent %
3653: \setbox0=\hbox{\hskip \deflastargmargin{\rm #2}\hskip \deftypemargin}%
3654: \dimen0=\hsize \advance \dimen0 by -\wd0 % compute size for first line
3655: \dimen1=\hsize \advance \dimen1 by -\defargsindent %size for continuations
3656: \parshape 2 0in \dimen0 \defargsindent \dimen1 %
3657: % Now output arg 2 ("Function" or some such)
3658: % ending at \deftypemargin from the right margin,
3659: % but stuck inside a box of width 0 so it does not interfere with linebreaking
3660: {% Adjust \hsize to exclude the ambient margins,
3661: % so that \rightline will obey them.
3662: \advance \hsize by -\dimen2 \advance \hsize by -\dimen3
3663: \rlap{\rightline{{\rm #2}\hskip \deftypemargin}}}%
3664: % Make all lines underfull and no complaints:
3665: \tolerance=10000 \hbadness=10000
3666: \advance\leftskip by -\defbodyindent
3667: \exdentamount=\defbodyindent
3668: {\df #1}\enskip % Generate function name
3669: }
3670:
3671: % Actually process the body of a definition
3672: % #1 should be the terminating control sequence, such as \Edefun.
3673: % #2 should be the "another name" control sequence, such as \defunx.
3674: % #3 should be the control sequence that actually processes the header,
3675: % such as \defunheader.
3676:
3677: \def\defparsebody #1#2#3{\begingroup\inENV% Environment for definitionbody
3678: \medbreak %
3679: % Define the end token that this defining construct specifies
3680: % so that it will exit this group.
3681: \def#1{\endgraf\endgroup\medbreak}%
3682: \def#2{\begingroup\obeylines\activeparens\spacesplit#3}%
3683: \parindent=0in
3684: \advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent
3685: \exdentamount=\defbodyindent
3686: \begingroup %
3687: \catcode 61=\active % 61 is `='
3688: \obeylines\activeparens\spacesplit#3}
3689:
3690: \def\defmethparsebody #1#2#3#4 {\begingroup\inENV %
3691: \medbreak %
3692: % Define the end token that this defining construct specifies
3693: % so that it will exit this group.
3694: \def#1{\endgraf\endgroup\medbreak}%
3695: \def#2##1 {\begingroup\obeylines\activeparens\spacesplit{#3{##1}}}%
3696: \parindent=0in
3697: \advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent
3698: \exdentamount=\defbodyindent
3699: \begingroup\obeylines\activeparens\spacesplit{#3{#4}}}
3700:
3701: \def\defopparsebody #1#2#3#4#5 {\begingroup\inENV %
3702: \medbreak %
3703: % Define the end token that this defining construct specifies
3704: % so that it will exit this group.
3705: \def#1{\endgraf\endgroup\medbreak}%
3706: \def#2##1 ##2 {\def#4{##1}%
3707: \begingroup\obeylines\activeparens\spacesplit{#3{##2}}}%
3708: \parindent=0in
3709: \advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent
3710: \exdentamount=\defbodyindent
3711: \begingroup\obeylines\activeparens\spacesplit{#3{#5}}}
3712:
3713: % These parsing functions are similar to the preceding ones
3714: % except that they do not make parens into active characters.
3715: % These are used for "variables" since they have no arguments.
3716:
3717: \def\defvarparsebody #1#2#3{\begingroup\inENV% Environment for definitionbody
3718: \medbreak %
3719: % Define the end token that this defining construct specifies
3720: % so that it will exit this group.
3721: \def#1{\endgraf\endgroup\medbreak}%
3722: \def#2{\begingroup\obeylines\spacesplit#3}%
3723: \parindent=0in
3724: \advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent
3725: \exdentamount=\defbodyindent
3726: \begingroup %
3727: \catcode 61=\active %
3728: \obeylines\spacesplit#3}
3729:
3730: % This is used for \def{tp,vr}parsebody. It could probably be used for
3731: % some of the others, too, with some judicious conditionals.
3732: %
3733: \def\parsebodycommon#1#2#3{%
3734: \begingroup\inENV %
3735: \medbreak %
3736: % Define the end token that this defining construct specifies
3737: % so that it will exit this group.
3738: \def#1{\endgraf\endgroup\medbreak}%
3739: \def#2##1 {\begingroup\obeylines\spacesplit{#3{##1}}}%
3740: \parindent=0in
3741: \advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent
3742: \exdentamount=\defbodyindent
3743: \begingroup\obeylines
3744: }
3745:
3746: \def\defvrparsebody#1#2#3#4 {%
3747: \parsebodycommon{#1}{#2}{#3}%
3748: \spacesplit{#3{#4}}%
3749: }
3750:
3751: % This loses on `@deftp {Data Type} {struct termios}' -- it thinks the
3752: % type is just `struct', because we lose the braces in `{struct
3753: % termios}' when \spacesplit reads its undelimited argument. Sigh.
3754: % \let\deftpparsebody=\defvrparsebody
3755: %
3756: % So, to get around this, we put \empty in with the type name. That
3757: % way, TeX won't find exactly `{...}' as an undelimited argument, and
3758: % won't strip off the braces.
3759: %
3760: \def\deftpparsebody #1#2#3#4 {%
3761: \parsebodycommon{#1}{#2}{#3}%
3762: \spacesplit{\parsetpheaderline{#3{#4}}}\empty
3763: }
3764:
3765: % Fine, but then we have to eventually remove the \empty *and* the
3766: % braces (if any). That's what this does, putting the result in \tptemp.
3767: %
3768: \def\removeemptybraces\empty#1\relax{\def\tptemp{#1}}%
3769:
3770: % After \spacesplit has done its work, this is called -- #1 is the final
3771: % thing to call, #2 the type name (which starts with \empty), and #3
3772: % (which might be empty) the arguments.
3773: %
3774: \def\parsetpheaderline#1#2#3{%
3775: \removeemptybraces#2\relax
3776: #1{\tptemp}{#3}%
3777: }%
3778:
3779: \def\defopvarparsebody #1#2#3#4#5 {\begingroup\inENV %
3780: \medbreak %
3781: % Define the end token that this defining construct specifies
3782: % so that it will exit this group.
3783: \def#1{\endgraf\endgroup\medbreak}%
3784: \def#2##1 ##2 {\def#4{##1}%
3785: \begingroup\obeylines\spacesplit{#3{##2}}}%
3786: \parindent=0in
3787: \advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent
3788: \exdentamount=\defbodyindent
3789: \begingroup\obeylines\spacesplit{#3{#5}}}
3790:
3791: % Split up #2 at the first space token.
3792: % call #1 with two arguments:
3793: % the first is all of #2 before the space token,
3794: % the second is all of #2 after that space token.
3795: % If #2 contains no space token, all of it is passed as the first arg
3796: % and the second is passed as empty.
3797:
3798: {\obeylines
3799: \gdef\spacesplit#1#2^^M{\endgroup\spacesplitfoo{#1}#2 \relax\spacesplitfoo}%
3800: \long\gdef\spacesplitfoo#1#2 #3#4\spacesplitfoo{%
3801: \ifx\relax #3%
3802: #1{#2}{}\else #1{#2}{#3#4}\fi}}
3803:
3804: % So much for the things common to all kinds of definitions.
3805:
3806: % Define @defun.
3807:
3808: % First, define the processing that is wanted for arguments of \defun
3809: % Use this to expand the args and terminate the paragraph they make up
3810:
3811: \def\defunargs #1{\functionparens \sl
3812: % Expand, preventing hyphenation at `-' chars.
3813: % Note that groups don't affect changes in \hyphenchar.
3814: \hyphenchar\tensl=0
3815: #1%
3816: \hyphenchar\tensl=45
3817: \ifnum\parencount=0 \else \errmessage{unbalanced parens in @def arguments}\fi%
3818: \interlinepenalty=10000
3819: \advance\rightskip by 0pt plus 1fil
3820: \endgraf\penalty 10000\vskip -\parskip\penalty 10000%
3821: }
3822:
3823: \def\deftypefunargs #1{%
3824: % Expand, preventing hyphenation at `-' chars.
3825: % Note that groups don't affect changes in \hyphenchar.
3826: % Use \boldbraxnoamp, not \functionparens, so that & is not special.
3827: \boldbraxnoamp
3828: \tclose{#1}% avoid \code because of side effects on active chars
3829: \interlinepenalty=10000
3830: \advance\rightskip by 0pt plus 1fil
3831: \endgraf\penalty 10000\vskip -\parskip\penalty 10000%
3832: }
3833:
3834: % Do complete processing of one @defun or @defunx line already parsed.
3835:
3836: % @deffn Command forward-char nchars
3837:
3838: \def\deffn{\defmethparsebody\Edeffn\deffnx\deffnheader}
3839:
3840: \def\deffnheader #1#2#3{\doind {fn}{\code{#2}}%
3841: \begingroup\defname {#2}{#1}\defunargs{#3}\endgroup %
3842: \catcode 61=\other % Turn off change made in \defparsebody
3843: }
3844:
3845: % @defun == @deffn Function
3846:
3847: \def\defun{\defparsebody\Edefun\defunx\defunheader}
3848:
3849: \def\defunheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index
3850: \begingroup\defname {#1}{Function}%
3851: \defunargs {#2}\endgroup %
3852: \catcode 61=\other % Turn off change made in \defparsebody
3853: }
3854:
3855: % @deftypefun int foobar (int @var{foo}, float @var{bar})
3856:
3857: \def\deftypefun{\defparsebody\Edeftypefun\deftypefunx\deftypefunheader}
3858:
3859: % #1 is the data type. #2 is the name and args.
3860: \def\deftypefunheader #1#2{\deftypefunheaderx{#1}#2 \relax}
3861: % #1 is the data type, #2 the name, #3 the args.
3862: \def\deftypefunheaderx #1#2 #3\relax{%
3863: \doind {fn}{\code{#2}}% Make entry in function index
3864: \begingroup\defname {\defheaderxcond#1\relax$$$#2}{Function}%
3865: \deftypefunargs {#3}\endgroup %
3866: \catcode 61=\other % Turn off change made in \defparsebody
3867: }
3868:
3869: % @deftypefn {Library Function} int foobar (int @var{foo}, float @var{bar})
3870:
3871: \def\deftypefn{\defmethparsebody\Edeftypefn\deftypefnx\deftypefnheader}
3872:
3873: % \defheaderxcond#1\relax$$$
3874: % puts #1 in @code, followed by a space, but does nothing if #1 is null.
3875: \def\defheaderxcond#1#2$$${\ifx#1\relax\else\code{#1#2} \fi}
3876:
3877: % #1 is the classification. #2 is the data type. #3 is the name and args.
3878: \def\deftypefnheader #1#2#3{\deftypefnheaderx{#1}{#2}#3 \relax}
3879: % #1 is the classification, #2 the data type, #3 the name, #4 the args.
3880: \def\deftypefnheaderx #1#2#3 #4\relax{%
3881: \doind {fn}{\code{#3}}% Make entry in function index
3882: \begingroup
3883: \normalparens % notably, turn off `&' magic, which prevents
3884: % at least some C++ text from working
3885: \defname {\defheaderxcond#2\relax$$$#3}{#1}%
3886: \deftypefunargs {#4}\endgroup %
3887: \catcode 61=\other % Turn off change made in \defparsebody
3888: }
3889:
3890: % @defmac == @deffn Macro
3891:
3892: \def\defmac{\defparsebody\Edefmac\defmacx\defmacheader}
3893:
3894: \def\defmacheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index
3895: \begingroup\defname {#1}{Macro}%
3896: \defunargs {#2}\endgroup %
3897: \catcode 61=\other % Turn off change made in \defparsebody
3898: }
3899:
3900: % @defspec == @deffn Special Form
3901:
3902: \def\defspec{\defparsebody\Edefspec\defspecx\defspecheader}
3903:
3904: \def\defspecheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index
3905: \begingroup\defname {#1}{Special Form}%
3906: \defunargs {#2}\endgroup %
3907: \catcode 61=\other % Turn off change made in \defparsebody
3908: }
3909:
3910: % This definition is run if you use @defunx
3911: % anywhere other than immediately after a @defun or @defunx.
3912:
3913: \def\deffnx #1 {\errmessage{@deffnx in invalid context}}
3914: \def\defunx #1 {\errmessage{@defunx in invalid context}}
3915: \def\defmacx #1 {\errmessage{@defmacx in invalid context}}
3916: \def\defspecx #1 {\errmessage{@defspecx in invalid context}}
3917: \def\deftypefnx #1 {\errmessage{@deftypefnx in invalid context}}
3918: \def\deftypeunx #1 {\errmessage{@deftypeunx in invalid context}}
3919:
3920: % @defmethod, and so on
3921:
3922: % @defop {Funny Method} foo-class frobnicate argument
3923:
3924: \def\defop #1 {\def\defoptype{#1}%
3925: \defopparsebody\Edefop\defopx\defopheader\defoptype}
3926:
3927: \def\defopheader #1#2#3{%
3928: \dosubind {fn}{\code{#2}}{on #1}% Make entry in function index
3929: \begingroup\defname {#2}{\defoptype{} on #1}%
3930: \defunargs {#3}\endgroup %
3931: }
3932:
3933: % @defmethod == @defop Method
3934:
3935: \def\defmethod{\defmethparsebody\Edefmethod\defmethodx\defmethodheader}
3936:
3937: \def\defmethodheader #1#2#3{%
3938: \dosubind {fn}{\code{#2}}{on #1}% entry in function index
3939: \begingroup\defname {#2}{Method on #1}%
3940: \defunargs {#3}\endgroup %
3941: }
3942:
3943: % @defcv {Class Option} foo-class foo-flag
3944:
3945: \def\defcv #1 {\def\defcvtype{#1}%
3946: \defopvarparsebody\Edefcv\defcvx\defcvarheader\defcvtype}
3947:
3948: \def\defcvarheader #1#2#3{%
3949: \dosubind {vr}{\code{#2}}{of #1}% Make entry in var index
3950: \begingroup\defname {#2}{\defcvtype{} of #1}%
3951: \defvarargs {#3}\endgroup %
3952: }
3953:
3954: % @defivar == @defcv {Instance Variable}
3955:
3956: \def\defivar{\defvrparsebody\Edefivar\defivarx\defivarheader}
3957:
3958: \def\defivarheader #1#2#3{%
3959: \dosubind {vr}{\code{#2}}{of #1}% Make entry in var index
3960: \begingroup\defname {#2}{Instance Variable of #1}%
3961: \defvarargs {#3}\endgroup %
3962: }
3963:
3964: % These definitions are run if you use @defmethodx, etc.,
3965: % anywhere other than immediately after a @defmethod, etc.
3966:
3967: \def\defopx #1 {\errmessage{@defopx in invalid context}}
3968: \def\defmethodx #1 {\errmessage{@defmethodx in invalid context}}
3969: \def\defcvx #1 {\errmessage{@defcvx in invalid context}}
3970: \def\defivarx #1 {\errmessage{@defivarx in invalid context}}
3971:
3972: % Now @defvar
3973:
3974: % First, define the processing that is wanted for arguments of @defvar.
3975: % This is actually simple: just print them in roman.
3976: % This must expand the args and terminate the paragraph they make up
3977: \def\defvarargs #1{\normalparens #1%
3978: \interlinepenalty=10000
3979: \endgraf\penalty 10000\vskip -\parskip\penalty 10000}
3980:
3981: % @defvr Counter foo-count
3982:
3983: \def\defvr{\defvrparsebody\Edefvr\defvrx\defvrheader}
3984:
3985: \def\defvrheader #1#2#3{\doind {vr}{\code{#2}}%
3986: \begingroup\defname {#2}{#1}\defvarargs{#3}\endgroup}
3987:
3988: % @defvar == @defvr Variable
3989:
3990: \def\defvar{\defvarparsebody\Edefvar\defvarx\defvarheader}
3991:
3992: \def\defvarheader #1#2{\doind {vr}{\code{#1}}% Make entry in var index
3993: \begingroup\defname {#1}{Variable}%
3994: \defvarargs {#2}\endgroup %
3995: }
3996:
3997: % @defopt == @defvr {User Option}
3998:
3999: \def\defopt{\defvarparsebody\Edefopt\defoptx\defoptheader}
4000:
4001: \def\defoptheader #1#2{\doind {vr}{\code{#1}}% Make entry in var index
4002: \begingroup\defname {#1}{User Option}%
4003: \defvarargs {#2}\endgroup %
4004: }
4005:
4006: % @deftypevar int foobar
4007:
4008: \def\deftypevar{\defvarparsebody\Edeftypevar\deftypevarx\deftypevarheader}
4009:
4010: % #1 is the data type. #2 is the name.
4011: \def\deftypevarheader #1#2{%
4012: \doind {vr}{\code{#2}}% Make entry in variables index
4013: \begingroup\defname {\defheaderxcond#1\relax$$$#2}{Variable}%
4014: \interlinepenalty=10000
4015: \endgraf\penalty 10000\vskip -\parskip\penalty 10000
4016: \endgroup}
4017:
4018: % @deftypevr {Global Flag} int enable
4019:
4020: \def\deftypevr{\defvrparsebody\Edeftypevr\deftypevrx\deftypevrheader}
4021:
4022: \def\deftypevrheader #1#2#3{\doind {vr}{\code{#3}}%
4023: \begingroup\defname {\defheaderxcond#2\relax$$$#3}{#1}
4024: \interlinepenalty=10000
4025: \endgraf\penalty 10000\vskip -\parskip\penalty 10000
4026: \endgroup}
4027:
4028: % This definition is run if you use @defvarx
4029: % anywhere other than immediately after a @defvar or @defvarx.
4030:
4031: \def\defvrx #1 {\errmessage{@defvrx in invalid context}}
4032: \def\defvarx #1 {\errmessage{@defvarx in invalid context}}
4033: \def\defoptx #1 {\errmessage{@defoptx in invalid context}}
4034: \def\deftypevarx #1 {\errmessage{@deftypevarx in invalid context}}
4035: \def\deftypevrx #1 {\errmessage{@deftypevrx in invalid context}}
4036:
4037: % Now define @deftp
4038: % Args are printed in bold, a slight difference from @defvar.
4039:
4040: \def\deftpargs #1{\bf \defvarargs{#1}}
4041:
4042: % @deftp Class window height width ...
4043:
4044: \def\deftp{\deftpparsebody\Edeftp\deftpx\deftpheader}
4045:
4046: \def\deftpheader #1#2#3{\doind {tp}{\code{#2}}%
4047: \begingroup\defname {#2}{#1}\deftpargs{#3}\endgroup}
4048:
4049: % This definition is run if you use @deftpx, etc
4050: % anywhere other than immediately after a @deftp, etc.
4051:
4052: \def\deftpx #1 {\errmessage{@deftpx in invalid context}}
4053:
4054:
4055: \message{cross reference,}
4056: % Define cross-reference macros
4057: \newwrite \auxfile
4058:
4059: \newif\ifhavexrefs % True if xref values are known.
4060: \newif\ifwarnedxrefs % True if we warned once that they aren't known.
4061:
4062: % @inforef is simple.
4063: \def\inforef #1{\inforefzzz #1,,,,**}
4064: \def\inforefzzz #1,#2,#3,#4**{\putwordSee{} \putwordInfo{} \putwordfile{} \file{\ignorespaces #3{}},
4065: node \samp{\ignorespaces#1{}}}
4066:
4067: % \setref{foo} defines a cross-reference point named foo.
4068:
4069: \def\setref#1{%
4070: \dosetq{#1-title}{Ytitle}%
4071: \dosetq{#1-pg}{Ypagenumber}%
4072: \dosetq{#1-snt}{Ysectionnumberandtype}}
4073:
4074: \def\unnumbsetref#1{%
4075: \dosetq{#1-title}{Ytitle}%
4076: \dosetq{#1-pg}{Ypagenumber}%
4077: \dosetq{#1-snt}{Ynothing}}
4078:
4079: \def\appendixsetref#1{%
4080: \dosetq{#1-title}{Ytitle}%
4081: \dosetq{#1-pg}{Ypagenumber}%
4082: \dosetq{#1-snt}{Yappendixletterandtype}}
4083:
4084: % \xref, \pxref, and \ref generate cross-references to specified points.
4085: % For \xrefX, #1 is the node name, #2 the name of the Info
4086: % cross-reference, #3 the printed node name, #4 the name of the Info
4087: % file, #5 the name of the printed manual. All but the node name can be
4088: % omitted.
4089: %
4090: \def\pxref#1{\putwordsee{} \xrefX[#1,,,,,,,]}
4091: \def\xref#1{\putwordSee{} \xrefX[#1,,,,,,,]}
4092: \def\ref#1{\xrefX[#1,,,,,,,]}
4093: \def\xrefX[#1,#2,#3,#4,#5,#6]{\begingroup
4094: \def\printedmanual{\ignorespaces #5}%
4095: \def\printednodename{\ignorespaces #3}%
4096: \setbox1=\hbox{\printedmanual}%
4097: \setbox0=\hbox{\printednodename}%
4098: \ifdim \wd0 = 0pt
4099: % No printed node name was explicitly given.
4100: \expandafter\ifx\csname SETxref-automatic-section-title\endcsname\relax
4101: % Use the node name inside the square brackets.
4102: \def\printednodename{\ignorespaces #1}%
4103: \else
4104: % Use the actual chapter/section title appear inside
4105: % the square brackets. Use the real section title if we have it.
4106: \ifdim \wd1>0pt%
4107: % It is in another manual, so we don't have it.
4108: \def\printednodename{\ignorespaces #1}%
4109: \else
4110: \ifhavexrefs
4111: % We know the real title if we have the xref values.
4112: \def\printednodename{\refx{#1-title}{}}%
4113: \else
4114: % Otherwise just copy the Info node name.
4115: \def\printednodename{\ignorespaces #1}%
4116: \fi%
4117: \fi
4118: \fi
4119: \fi
4120: %
4121: % If we use \unhbox0 and \unhbox1 to print the node names, TeX does not
4122: % insert empty discretionaries after hyphens, which means that it will
4123: % not find a line break at a hyphen in a node names. Since some manuals
4124: % are best written with fairly long node names, containing hyphens, this
4125: % is a loss. Therefore, we give the text of the node name again, so it
4126: % is as if TeX is seeing it for the first time.
4127: \ifdim \wd1 > 0pt
4128: \putwordsection{} ``\printednodename'' in \cite{\printedmanual}%
4129: \else
4130: % _ (for example) has to be the character _ for the purposes of the
4131: % control sequence corresponding to the node, but it has to expand
4132: % into the usual \leavevmode...\vrule stuff for purposes of
4133: % printing. So we \turnoffactive for the \refx-snt, back on for the
4134: % printing, back off for the \refx-pg.
4135: {\turnoffactive \refx{#1-snt}{}}%
4136: \space [\printednodename],\space
4137: \turnoffactive \putwordpage\tie\refx{#1-pg}{}%
4138: \fi
4139: \endgroup}
4140:
4141: % \dosetq is the interface for calls from other macros
4142:
4143: % Use \turnoffactive so that punctuation chars such as underscore
4144: % work in node names.
4145: \def\dosetq #1#2{{\let\folio=0 \turnoffactive \auxhat%
4146: \edef\next{\write\auxfile{\internalsetq {#1}{#2}}}%
4147: \next}}
4148:
4149: % \internalsetq {foo}{page} expands into
4150: % CHARACTERS 'xrdef {foo}{...expansion of \Ypage...}
4151: % When the aux file is read, ' is the escape character
4152:
4153: \def\internalsetq #1#2{'xrdef {#1}{\csname #2\endcsname}}
4154:
4155: % Things to be expanded by \internalsetq
4156:
4157: \def\Ypagenumber{\folio}
4158:
4159: \def\Ytitle{\thissection}
4160:
4161: \def\Ynothing{}
4162:
4163: \def\Ysectionnumberandtype{%
4164: \ifnum\secno=0 \putwordChapter\xreftie\the\chapno %
4165: \else \ifnum \subsecno=0 \putwordSection\xreftie\the\chapno.\the\secno %
4166: \else \ifnum \subsubsecno=0 %
4167: \putwordSection\xreftie\the\chapno.\the\secno.\the\subsecno %
4168: \else %
4169: \putwordSection\xreftie\the\chapno.\the\secno.\the\subsecno.\the\subsubsecno %
4170: \fi \fi \fi }
4171:
4172: \def\Yappendixletterandtype{%
4173: \ifnum\secno=0 \putwordAppendix\xreftie'char\the\appendixno{}%
4174: \else \ifnum \subsecno=0 \putwordSection\xreftie'char\the\appendixno.\the\secno %
4175: \else \ifnum \subsubsecno=0 %
4176: \putwordSection\xreftie'char\the\appendixno.\the\secno.\the\subsecno %
4177: \else %
4178: \putwordSection\xreftie'char\the\appendixno.\the\secno.\the\subsecno.\the\subsubsecno %
4179: \fi \fi \fi }
4180:
4181: \gdef\xreftie{'tie}
4182:
4183: % Use TeX 3.0's \inputlineno to get the line number, for better error
4184: % messages, but if we're using an old version of TeX, don't do anything.
4185: %
4186: \ifx\inputlineno\thisisundefined
4187: \let\linenumber = \empty % Non-3.0.
4188: \else
4189: \def\linenumber{\the\inputlineno:\space}
4190: \fi
4191:
4192: % Define \refx{NAME}{SUFFIX} to reference a cross-reference string named NAME.
4193: % If its value is nonempty, SUFFIX is output afterward.
4194:
4195: \def\refx#1#2{%
4196: \expandafter\ifx\csname X#1\endcsname\relax
4197: % If not defined, say something at least.
4198: $\langle$un\-de\-fined$\rangle$%
4199: \ifhavexrefs
4200: \message{\linenumber Undefined cross reference `#1'.}%
4201: \else
4202: \ifwarnedxrefs\else
4203: \global\warnedxrefstrue
4204: \message{Cross reference values unknown; you must run TeX again.}%
4205: \fi
4206: \fi
4207: \else
4208: % It's defined, so just use it.
4209: \csname X#1\endcsname
4210: \fi
4211: #2% Output the suffix in any case.
4212: }
4213:
4214: % Read the last existing aux file, if any. No error if none exists.
4215:
4216: % This is the macro invoked by entries in the aux file.
4217: \def\xrdef #1#2{
4218: {\catcode`\'=\other\expandafter \gdef \csname X#1\endcsname {#2}}}
4219:
4220: \def\readauxfile{%
4221: \begingroup
4222: \catcode `\^^@=\other
4223: \catcode `\=\other
4224: \catcode `\=\other
4225: \catcode `\^^C=\other
4226: \catcode `\^^D=\other
4227: \catcode `\^^E=\other
4228: \catcode `\^^F=\other
4229: \catcode `\^^G=\other
4230: \catcode `\^^H=\other
4231: \catcode `\=\other
4232: \catcode `\^^L=\other
4233: \catcode `\=\other
4234: \catcode `\=\other
4235: \catcode `\=\other
4236: \catcode `\=\other
4237: \catcode `\=\other
4238: \catcode `\=\other
4239: \catcode `\=\other
4240: \catcode `\=\other
4241: \catcode `\=\other
4242: \catcode `\=\other
4243: \catcode `\=\other
4244: \catcode `\=\other
4245: \catcode 26=\other
4246: \catcode `\^^[=\other
4247: \catcode `\^^\=\other
4248: \catcode `\^^]=\other
4249: \catcode `\^^^=\other
4250: \catcode `\^^_=\other
4251: \catcode `\@=\other
4252: \catcode `\^=\other
4253: \catcode `\~=\other
4254: \catcode `\[=\other
4255: \catcode `\]=\other
4256: \catcode`\"=\other
4257: \catcode`\_=\other
4258: \catcode`\|=\other
4259: \catcode`\<=\other
4260: \catcode`\>=\other
4261: \catcode `\$=\other
4262: \catcode `\#=\other
4263: \catcode `\&=\other
4264: % `\+ does not work, so use 43.
4265: \catcode 43=\other
4266: % Make the characters 128-255 be printing characters
4267: {%
4268: \count 1=128
4269: \def\loop{%
4270: \catcode\count 1=\other
4271: \advance\count 1 by 1
4272: \ifnum \count 1<256 \loop \fi
4273: }%
4274: }%
4275: % the aux file uses ' as the escape.
4276: % Turn off \ as an escape so we do not lose on
4277: % entries which were dumped with control sequences in their names.
4278: % For example, 'xrdef {$\leq $-fun}{page ...} made by @defun ^^
4279: % Reference to such entries still does not work the way one would wish,
4280: % but at least they do not bomb out when the aux file is read in.
4281: \catcode `\{=1 \catcode `\}=2
4282: \catcode `\%=\other
4283: \catcode `\'=0
4284: \catcode`\^=7 % to make ^^e4 etc usable in xref tags
4285: \catcode `\\=\other
4286: \openin 1 \jobname.aux
4287: \ifeof 1 \else \closein 1 \input \jobname.aux \global\havexrefstrue
4288: \global\warnedobstrue
4289: \fi
4290: % Open the new aux file. Tex will close it automatically at exit.
4291: \openout \auxfile=\jobname.aux
4292: \endgroup}
4293:
4294:
4295: % Footnotes.
4296:
4297: \newcount \footnoteno
4298:
4299: % The trailing space in the following definition for supereject is
4300: % vital for proper filling; pages come out unaligned when you do a
4301: % pagealignmacro call if that space before the closing brace is
4302: % removed. (Generally, numeric constants should always be followed by a
4303: % space to prevent strange expansion errors.)
4304: \def\supereject{\par\penalty -20000\footnoteno =0 }
4305:
4306: % @footnotestyle is meaningful for info output only..
4307: \let\footnotestyle=\comment
4308:
4309: \let\ptexfootnote=\footnote
4310:
4311: {\catcode `\@=11
4312: %
4313: % Auto-number footnotes. Otherwise like plain.
4314: \gdef\footnote{%
4315: \global\advance\footnoteno by \@ne
4316: \edef\thisfootno{$^{\the\footnoteno}$}%
4317: %
4318: % In case the footnote comes at the end of a sentence, preserve the
4319: % extra spacing after we do the footnote number.
4320: \let\@sf\empty
4321: \ifhmode\edef\@sf{\spacefactor\the\spacefactor}\/\fi
4322: %
4323: % Remove inadvertent blank space before typesetting the footnote number.
4324: \unskip
4325: \thisfootno\@sf
4326: \footnotezzz
4327: }%
4328:
4329: % Don't bother with the trickery in plain.tex to not require the
4330: % footnote text as a parameter. Our footnotes don't need to be so general.
4331: %
4332: \long\gdef\footnotezzz#1{\insert\footins{%
4333: % We want to typeset this text as a normal paragraph, even if the
4334: % footnote reference occurs in (for example) a display environment.
4335: % So reset some parameters.
4336: \interlinepenalty\interfootnotelinepenalty
4337: \splittopskip\ht\strutbox % top baseline for broken footnotes
4338: \splitmaxdepth\dp\strutbox
4339: \floatingpenalty\@MM
4340: \leftskip\z@skip
4341: \rightskip\z@skip
4342: \spaceskip\z@skip
4343: \xspaceskip\z@skip
4344: \parindent\defaultparindent
4345: %
4346: % Hang the footnote text off the number.
4347: \hang
4348: \textindent{\thisfootno}%
4349: %
4350: % Don't crash into the line above the footnote text. Since this
4351: % expands into a box, it must come within the paragraph, lest it
4352: % provide a place where TeX can split the footnote.
4353: \footstrut
4354: #1\strut}%
4355: }
4356:
4357: }%end \catcode `\@=11
4358:
4359: % Set the baselineskip to #1, and the lineskip and strut size
4360: % correspondingly. There is no deep meaning behind these magic numbers
4361: % used as factors; they just match (closely enough) what Knuth defined.
4362: %
4363: \def\lineskipfactor{.08333}
4364: \def\strutheightpercent{.70833}
4365: \def\strutdepthpercent {.29167}
4366: %
4367: \def\setleading#1{%
4368: \normalbaselineskip = #1\relax
4369: \normallineskip = \lineskipfactor\normalbaselineskip
4370: \normalbaselines
4371: \setbox\strutbox =\hbox{%
4372: \vrule width0pt height\strutheightpercent\baselineskip
4373: depth \strutdepthpercent \baselineskip
4374: }%
4375: }
4376:
4377: % @| inserts a changebar to the left of the current line. It should
4378: % surround any changed text. This approach does *not* work if the
4379: % change spans more than two lines of output. To handle that, we would
4380: % have adopt a much more difficult approach (putting marks into the main
4381: % vertical list for the beginning and end of each change).
4382: %
4383: \def\|{%
4384: % \vadjust can only be used in horizontal mode.
4385: \leavevmode
4386: %
4387: % Append this vertical mode material after the current line in the output.
4388: \vadjust{%
4389: % We want to insert a rule with the height and depth of the current
4390: % leading; that is exactly what \strutbox is supposed to record.
4391: \vskip-\baselineskip
4392: %
4393: % \vadjust-items are inserted at the left edge of the type. So
4394: % the \llap here moves out into the left-hand margin.
4395: \llap{%
4396: %
4397: % For a thicker or thinner bar, change the `1pt'.
4398: \vrule height\baselineskip width1pt
4399: %
4400: % This is the space between the bar and the text.
4401: \hskip 12pt
4402: }%
4403: }%
4404: }
4405:
4406: % For a final copy, take out the rectangles
4407: % that mark overfull boxes (in case you have decided
4408: % that the text looks ok even though it passes the margin).
4409: %
4410: \def\finalout{\overfullrule=0pt}
4411:
4412:
4413: % End of control word definitions.
4414:
4415: \message{and turning on texinfo input format.}
4416:
4417: \def\openindices{%
4418: \newindex{cp}%
4419: \newcodeindex{fn}%
4420: \newcodeindex{vr}%
4421: \newcodeindex{tp}%
4422: \newcodeindex{ky}%
4423: \newcodeindex{pg}%
4424: }
4425:
4426: % Set some numeric style parameters, for 8.5 x 11 format.
4427:
4428: \hsize = 6in
4429: \hoffset = .25in
4430: \newdimen\defaultparindent \defaultparindent = 15pt
4431: \parindent = \defaultparindent
4432: \parskip 3pt plus 2pt minus 1pt
4433: \setleading{13.2pt}
4434: \advance\topskip by 1.2cm
4435:
4436: \chapheadingskip = 15pt plus 4pt minus 2pt
4437: \secheadingskip = 12pt plus 3pt minus 2pt
4438: \subsecheadingskip = 9pt plus 2pt minus 2pt
4439:
4440: % Prevent underfull vbox error messages.
4441: \vbadness=10000
4442:
4443: % Following George Bush, just get rid of widows and orphans.
4444: \widowpenalty=10000
4445: \clubpenalty=10000
4446:
4447: % Use TeX 3.0's \emergencystretch to help line breaking, but if we're
4448: % using an old version of TeX, don't do anything. We want the amount of
4449: % stretch added to depend on the line length, hence the dependence on
4450: % \hsize. This makes it come to about 9pt for the 8.5x11 format.
4451: %
4452: \ifx\emergencystretch\thisisundefined
4453: % Allow us to assign to \emergencystretch anyway.
4454: \def\emergencystretch{\dimen0}%
4455: \else
4456: \emergencystretch = \hsize
4457: \divide\emergencystretch by 45
4458: \fi
4459:
4460: % Use @smallbook to reset parameters for 7x9.5 format (or else 7x9.25)
4461: \def\smallbook{
4462: \global\chapheadingskip = 15pt plus 4pt minus 2pt
4463: \global\secheadingskip = 12pt plus 3pt minus 2pt
4464: \global\subsecheadingskip = 9pt plus 2pt minus 2pt
4465: %
4466: \global\lispnarrowing = 0.3in
4467: \setleading{12pt}
4468: \advance\topskip by -1cm
4469: \global\parskip 2pt plus 1pt
4470: \global\hsize = 5in
4471: \global\vsize=7.5in
4472: \global\tolerance=700
4473: \global\hfuzz=1pt
4474: \global\contentsrightmargin=0pt
4475: \global\deftypemargin=0pt
4476: \global\defbodyindent=.5cm
4477: %
4478: \global\pagewidth=\hsize
4479: \global\pageheight=\vsize
4480: %
4481: \global\let\smalllisp=\smalllispx
4482: \global\let\smallexample=\smalllispx
4483: \global\def\Esmallexample{\Esmalllisp}
4484: }
4485:
4486: % Use @afourpaper to print on European A4 paper.
4487: \def\afourpaper{
4488: \global\tolerance=700
4489: \global\hfuzz=1pt
4490: \setleading{12pt}
4491: \global\parskip 15pt plus 1pt
4492:
4493: \global\vsize= 53\baselineskip
4494: \advance\vsize by \topskip
4495: %\global\hsize= 5.85in % A4 wide 10pt
4496: \global\hsize= 6.5in
4497: \global\outerhsize=\hsize
4498: \global\advance\outerhsize by 0.5in
4499: \global\outervsize=\vsize
4500: \global\advance\outervsize by 0.6in
4501:
4502: \global\pagewidth=\hsize
4503: \global\pageheight=\vsize
4504: }
4505:
4506: \bindingoffset=0pt
4507: \normaloffset=\hoffset
4508: \pagewidth=\hsize
4509: \pageheight=\vsize
4510:
4511: % Allow control of the text dimensions. Parameters in order: textheight;
4512: % textwidth; voffset; hoffset; binding offset; topskip.
4513: % All require a dimension;
4514: % header is additional; added length extends the bottom of the page.
4515:
4516: \def\changepagesizes#1#2#3#4#5#6{
4517: \global\vsize= #1
4518: \global\topskip= #6
4519: \advance\vsize by \topskip
4520: \global\voffset= #3
4521: \global\hsize= #2
4522: \global\outerhsize=\hsize
4523: \global\advance\outerhsize by 0.5in
4524: \global\outervsize=\vsize
4525: \global\advance\outervsize by 0.6in
4526: \global\pagewidth=\hsize
4527: \global\pageheight=\vsize
4528: \global\normaloffset= #4
4529: \global\bindingoffset= #5}
4530:
4531: % A specific text layout, 24x15cm overall, intended for A4 paper. Top margin
4532: % 29mm, hence bottom margin 28mm, nominal side margin 3cm.
4533: \def\afourlatex
4534: {\global\tolerance=700
4535: \global\hfuzz=1pt
4536: \setleading{12pt}
4537: \global\parskip 15pt plus 1pt
4538: \advance\baselineskip by 1.6pt
4539: \changepagesizes{237mm}{150mm}{3.6mm}{3.6mm}{3mm}{7mm}
4540: }
4541:
4542: % Use @afourwide to print on European A4 paper in wide format.
4543: \def\afourwide{\afourpaper
4544: \changepagesizes{9.5in}{6.5in}{\hoffset}{\normaloffset}{\bindingoffset}{7mm}}
4545:
4546: % Define macros to output various characters with catcode for normal text.
4547: \catcode`\"=\other
4548: \catcode`\~=\other
4549: \catcode`\^=\other
4550: \catcode`\_=\other
4551: \catcode`\|=\other
4552: \catcode`\<=\other
4553: \catcode`\>=\other
4554: \catcode`\+=\other
4555: \def\normaldoublequote{"}
4556: \def\normaltilde{~}
4557: \def\normalcaret{^}
4558: \def\normalunderscore{_}
4559: \def\normalverticalbar{|}
4560: \def\normalless{<}
4561: \def\normalgreater{>}
4562: \def\normalplus{+}
4563:
4564: % This macro is used to make a character print one way in ttfont
4565: % where it can probably just be output, and another way in other fonts,
4566: % where something hairier probably needs to be done.
4567: %
4568: % #1 is what to print if we are indeed using \tt; #2 is what to print
4569: % otherwise. Since all the Computer Modern typewriter fonts have zero
4570: % interword stretch (and shrink), and it is reasonable to expect all
4571: % typewriter fonts to have this, we can check that font parameter.
4572: %
4573: \def\ifusingtt#1#2{\ifdim \fontdimen3\the\font=0pt #1\else #2\fi}
4574:
4575: % Turn off all special characters except @
4576: % (and those which the user can use as if they were ordinary).
4577: % Most of these we simply print from the \tt font, but for some, we can
4578: % use math or other variants that look better in normal text.
4579:
4580: \catcode`\"=\active
4581: \def\activedoublequote{{\tt \char '042}}
4582: \let"=\activedoublequote
4583: \catcode`\~=\active
4584: \def~{{\tt \char '176}}
4585: \chardef\hat=`\^
4586: \catcode`\^=\active
4587: \def\auxhat{\def^{'hat}}
4588: \def^{{\tt \hat}}
4589:
4590: \catcode`\_=\active
4591: \def_{\ifusingtt\normalunderscore\_}
4592: % Subroutine for the previous macro.
4593: \def\_{\leavevmode \kern.06em \vbox{\hrule width.3em height.1ex}}
4594:
4595: \catcode`\|=\active
4596: \def|{{\tt \char '174}}
4597: \chardef \less=`\<
4598: \catcode`\<=\active
4599: \def<{{\tt \less}}
4600: \chardef \gtr=`\>
4601: \catcode`\>=\active
4602: \def>{{\tt \gtr}}
4603: \catcode`\+=\active
4604: \def+{{\tt \char 43}}
4605: %\catcode 27=\active
4606: %\def^^[{$\diamondsuit$}
4607:
4608: % Set up an active definition for =, but don't enable it most of the time.
4609: {\catcode`\==\active
4610: \global\def={{\tt \char 61}}}
4611:
4612: \catcode`+=\active
4613: \catcode`\_=\active
4614:
4615: % If a .fmt file is being used, characters that might appear in a file
4616: % name cannot be active until we have parsed the command line.
4617: % So turn them off again, and have \everyjob (or @setfilename) turn them on.
4618: % \otherifyactive is called near the end of this file.
4619: \def\otherifyactive{\catcode`+=\other \catcode`\_=\other}
4620:
4621: \catcode`\@=0
4622:
4623: % \rawbackslashxx output one backslash character in current font
4624: \global\chardef\rawbackslashxx=`\\
4625: %{\catcode`\\=\other
4626: %@gdef@rawbackslashxx{\}}
4627:
4628: % \rawbackslash redefines \ as input to do \rawbackslashxx.
4629: {\catcode`\\=\active
4630: @gdef@rawbackslash{@let\=@rawbackslashxx }}
4631:
4632: % \normalbackslash outputs one backslash in fixed width font.
4633: \def\normalbackslash{{\tt\rawbackslashxx}}
4634:
4635: % Say @foo, not \foo, in error messages.
4636: \escapechar=`\@
4637:
4638: % \catcode 17=0 % Define control-q
4639: \catcode`\\=\active
4640:
4641: % Used sometimes to turn off (effectively) the active characters
4642: % even after parsing them.
4643: @def@turnoffactive{@let"=@normaldoublequote
4644: @let\=@realbackslash
4645: @let~=@normaltilde
4646: @let^=@normalcaret
4647: @let_=@normalunderscore
4648: @let|=@normalverticalbar
4649: @let<=@normalless
4650: @let>=@normalgreater
4651: @let+=@normalplus}
4652:
4653: @def@normalturnoffactive{@let"=@normaldoublequote
4654: @let\=@normalbackslash
4655: @let~=@normaltilde
4656: @let^=@normalcaret
4657: @let_=@normalunderscore
4658: @let|=@normalverticalbar
4659: @let<=@normalless
4660: @let>=@normalgreater
4661: @let+=@normalplus}
4662:
4663: % Make _ and + \other characters, temporarily.
4664: % This is canceled by @fixbackslash.
4665: @otherifyactive
4666:
4667: % If a .fmt file is being used, we don't want the `\input texinfo' to show up.
4668: % That is what \eatinput is for; after that, the `\' should revert to printing
4669: % a backslash.
4670: %
4671: @gdef@eatinput input texinfo{@fixbackslash}
4672: @global@let\ = @eatinput
4673:
4674: % On the other hand, perhaps the file did not have a `\input texinfo'. Then
4675: % the first `\{ in the file would cause an error. This macro tries to fix
4676: % that, assuming it is called before the first `\' could plausibly occur.
4677: % Also back turn on active characters that might appear in the input
4678: % file name, in case not using a pre-dumped format.
4679: %
4680: @gdef@fixbackslash{@ifx\@eatinput @let\ = @normalbackslash @fi
4681: @catcode`+=@active @catcode`@_=@active}
4682:
4683: %% These look ok in all fonts, so just make them not special. The @rm below
4684: %% makes sure that the current font starts out as the newly loaded cmr10
4685: @catcode`@$=@other @catcode`@%=@other @catcode`@&=@other @catcode`@#=@other
4686:
4687: @textfonts
4688: @rm
4689:
4690: @c Local variables:
4691: @c page-delimiter: "^\\\\message"
4692: @c End:
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>