Annotation of gforth/doc/texinfo.tex, revision 1.2
1.2 ! anton 1: % texinfo.tex -- TeX macros to handle Texinfo files.
! 2: % $Id: texinfo.tex,v 2.227 1998/02/25 22:54:34 karl Exp $
! 3: %
! 4: % Copyright (C) 1985, 86, 88, 90, 91, 92, 93, 94, 95, 96, 97, 98
! 5: % Free Software Foundation, Inc.
! 6: %
! 7: % This texinfo.tex file is free software; you can redistribute it and/or
! 8: % modify it under the terms of the GNU General Public License as
! 9: % published by the Free Software Foundation; either version 2, or (at
! 10: % your option) any later version.
! 11: %
! 12: % This texinfo.tex file is distributed in the hope that it will be
! 13: % useful, but WITHOUT ANY WARRANTY; without even the implied warranty
! 14: % of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
! 15: % General Public License for more details.
! 16: %
! 17: % You should have received a copy of the GNU General Public License
! 18: % along with this texinfo.tex file; see the file COPYING. If not, write
! 19: % to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
! 20: % Boston, MA 02111-1307, USA.
! 21: %
! 22: % In other words, you are welcome to use, share and improve this program.
! 23: % You are forbidden to forbid anyone else to use, share and improve
! 24: % what you give them. Help stamp out software-hoarding!
! 25: %
! 26: % Please try the latest version of texinfo.tex before submitting bug
! 27: % reports; you can get the latest version from:
! 28: % ftp://ftp.cs.umb.edu/pub/tex/texinfo.tex
! 29: % /home/gd/gnu/doc/texinfo.tex on the GNU machines.
! 30: %
! 31: % Send bug reports to bug-texinfo@gnu.org.
! 32: % Please include a precise test case in each bug report,
! 33: % including a complete document with which we can reproduce the problem.
! 34: %
! 35: % Texinfo macros (with @macro) are *not* supported by texinfo.tex. You
! 36: % have to run makeinfo -E to expand macros first; the texi2dvi script
! 37: % does this.
1.1 anton 38:
39:
40: % Make it possible to create a .fmt file just by loading this file:
41: % if the underlying format is not loaded, start by loading it now.
42: % Added by gildea November 1993.
43: \expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
44:
45: % This automatically updates the version number based on RCS.
46: \def\deftexinfoversion$#1: #2 ${\def\texinfoversion{#2}}
1.2 ! anton 47: \deftexinfoversion$Revision: 2.227 $
1.1 anton 48: \message{Loading texinfo package [Version \texinfoversion]:}
49:
50: % If in a .fmt file, print the version number
51: % and turn on active characters that we couldn't do earlier because
52: % they might have appeared in the input file name.
53: \everyjob{\message{[Texinfo version \texinfoversion]}\message{}
54: \catcode`+=\active \catcode`\_=\active}
55:
56: % Save some parts of plain tex whose names we will redefine.
57:
58: \let\ptexb=\b
59: \let\ptexbullet=\bullet
60: \let\ptexc=\c
61: \let\ptexcomma=\,
62: \let\ptexdot=\.
63: \let\ptexdots=\dots
64: \let\ptexend=\end
1.2 ! anton 65: \let\ptexequiv=\equiv
! 66: \let\ptexexclam=\!
1.1 anton 67: \let\ptexi=\i
68: \let\ptexlbrace=\{
69: \let\ptexrbrace=\}
70: \let\ptexstar=\*
71: \let\ptext=\t
72:
73: % Be sure we're in horizontal mode when doing a tie, since we make space
74: % equivalent to this in @example-like environments. Otherwise, a space
75: % at the beginning of a line will start with \penalty -- and
76: % since \penalty is valid in vertical mode, we'd end up putting the
77: % penalty on the vertical list instead of in the new paragraph.
78: {\catcode`@ = 11
79: % Avoid using \@M directly, because that causes trouble
80: % if the definition is written into an index file.
81: \global\let\tiepenalty = \@M
82: \gdef\tie{\leavevmode\penalty\tiepenalty\ }
83: }
84:
85:
86: \message{Basics,}
87: \chardef\other=12
88:
89: % If this character appears in an error message or help string, it
90: % starts a new line in the output.
91: \newlinechar = `^^J
92:
93: % Set up fixed words for English.
94: \ifx\putwordChapter\undefined{\gdef\putwordChapter{Chapter}}\fi%
95: \def\putwordInfo{Info}%
96: \ifx\putwordSee\undefined{\gdef\putwordSee{See}}\fi%
97: \ifx\putwordsee\undefined{\gdef\putwordsee{see}}\fi%
98: \ifx\putwordfile\undefined{\gdef\putwordfile{file}}\fi%
99: \ifx\putwordpage\undefined{\gdef\putwordpage{page}}\fi%
100: \ifx\putwordsection\undefined{\gdef\putwordsection{section}}\fi%
101: \ifx\putwordSection\undefined{\gdef\putwordSection{Section}}\fi%
102: \ifx\putwordTableofContents\undefined{\gdef\putwordTableofContents{Table of Contents}}\fi%
103: \ifx\putwordShortContents\undefined{\gdef\putwordShortContents{Short Contents}}\fi%
104: \ifx\putwordAppendix\undefined{\gdef\putwordAppendix{Appendix}}\fi%
105:
106: % Ignore a token.
107: %
108: \def\gobble#1{}
109:
110: \hyphenation{ap-pen-dix}
111: \hyphenation{mini-buf-fer mini-buf-fers}
112: \hyphenation{eshell}
1.2 ! anton 113: \hyphenation{white-space}
1.1 anton 114:
115: % Margin to add to right of even pages, to left of odd pages.
1.2 ! anton 116: \newdimen \bindingoffset
! 117: \newdimen \normaloffset
1.1 anton 118: \newdimen\pagewidth \newdimen\pageheight
119:
120: % Sometimes it is convenient to have everything in the transcript file
121: % and nothing on the terminal. We don't just call \tracingall here,
122: % since that produces some useless output on the terminal.
123: %
124: \def\gloggingall{\begingroup \globaldefs = 1 \loggingall \endgroup}%
125: \def\loggingall{\tracingcommands2 \tracingstats2
126: \tracingpages1 \tracingoutput1 \tracinglostchars1
127: \tracingmacros2 \tracingparagraphs1 \tracingrestores1
128: \showboxbreadth\maxdimen\showboxdepth\maxdimen
129: }%
130:
1.2 ! anton 131: % For @cropmarks command.
! 132: % Do @cropmarks to get crop marks.
! 133: %
! 134: \newif\ifcropmarks
! 135: \let\cropmarks = \cropmarkstrue
1.1 anton 136: %
1.2 ! anton 137: % Dimensions to add cropmarks at corners.
! 138: % Added by P. A. MacKay, 12 Nov. 1986
1.1 anton 139: %
140: \newdimen\cornerlong \newdimen\cornerthick
1.2 ! anton 141: \newdimen\topandbottommargin
! 142: \newdimen\outerhsize \newdimen\outervsize
1.1 anton 143: \cornerlong=1pc\cornerthick=.3pt % These set size of cropmarks
144: \outerhsize=7in
145: %\outervsize=9.5in
146: % Alternative @smallbook page size is 9.25in
147: \outervsize=9.25in
148: \topandbottommargin=.75in
1.2 ! anton 149:
! 150: % Main output routine.
! 151: \chardef\PAGE = 255
! 152: \output = {\onepageout{\pagecontents\PAGE}}
! 153:
! 154: \newbox\headlinebox
! 155: \newbox\footlinebox
1.1 anton 156:
157: % \onepageout takes a vbox as an argument. Note that \pagecontents
158: % does insertions, but you have to call it yourself.
159: \def\onepageout#1{%
1.2 ! anton 160: \ifcropmarks \hoffset=0pt \else \hoffset=\normaloffset \fi
! 161: %
1.1 anton 162: \ifodd\pageno \advance\hoffset by \bindingoffset
163: \else \advance\hoffset by -\bindingoffset\fi
1.2 ! anton 164: %
! 165: % Do this outside of the \shipout so @code etc. will be expanded in
! 166: % the headline as they should be, not taken literally (outputting ''code).
! 167: \setbox\headlinebox = \vbox{\let\hsize=\pagewidth \makeheadline}%
! 168: \setbox\footlinebox = \vbox{\let\hsize=\pagewidth \makefootline}%
! 169: %
1.1 anton 170: {%
1.2 ! anton 171: % Have to do this stuff outside the \shipout because we want it to
! 172: % take effect in \write's, yet the group defined by the \vbox ends
! 173: % before the \shipout runs.
! 174: %
! 175: \escapechar = `\\ % use backslash in output files.
! 176: \indexdummies % don't expand commands in the output.
! 177: \normalturnoffactive % \ in index entries must not stay \, e.g., if
! 178: % the page break happens to be in the middle of an example.
1.1 anton 179: \shipout\vbox{%
1.2 ! anton 180: \ifcropmarks \vbox to \outervsize\bgroup
! 181: \hsize = \outerhsize
! 182: \line{\ewtop\hfil\ewtop}%
! 183: \nointerlineskip
! 184: \line{%
! 185: \vbox{\moveleft\cornerthick\nstop}%
! 186: \hfill
! 187: \vbox{\moveright\cornerthick\nstop}%
! 188: }%
! 189: \vskip\topandbottommargin
! 190: \line\bgroup
! 191: \hfil % center the page within the outer (page) hsize.
! 192: \ifodd\pageno\hskip\bindingoffset\fi
! 193: \vbox\bgroup
! 194: \fi
! 195: %
! 196: \unvbox\headlinebox
1.1 anton 197: \pagebody{#1}%
1.2 ! anton 198: \ifdim\ht\footlinebox > 0pt
! 199: % Only leave this space if the footline is nonempty.
! 200: % (We lessened \vsize for it in \oddfootingxxx.)
! 201: % The \baselineskip=24pt in plain's \makefootline has no effect.
! 202: \vskip 2\baselineskip
! 203: \unvbox\footlinebox
! 204: \fi
! 205: %
! 206: \ifcropmarks
! 207: \egroup % end of \vbox\bgroup
! 208: \hfil\egroup % end of (centering) \line\bgroup
! 209: \vskip\topandbottommargin plus1fill minus1fill
! 210: \boxmaxdepth = \cornerthick
! 211: \line{%
! 212: \vbox{\moveleft\cornerthick\nsbot}%
! 213: \hfill
! 214: \vbox{\moveright\cornerthick\nsbot}%
! 215: }%
! 216: \nointerlineskip
! 217: \line{\ewbot\hfil\ewbot}%
! 218: \egroup % \vbox from first cropmarks clause
! 219: \fi
! 220: }% end of \shipout\vbox
! 221: }% end of group with \turnoffactive
1.1 anton 222: \advancepageno
223: \ifnum\outputpenalty>-20000 \else\dosupereject\fi
224: }
225:
226: \newinsert\margin \dimen\margin=\maxdimen
227:
228: \def\pagebody#1{\vbox to\pageheight{\boxmaxdepth=\maxdepth #1}}
229: {\catcode`\@ =11
230: \gdef\pagecontents#1{\ifvoid\topins\else\unvbox\topins\fi
231: % marginal hacks, juha@viisa.uucp (Juha Takala)
232: \ifvoid\margin\else % marginal info is present
233: \rlap{\kern\hsize\vbox to\z@{\kern1pt\box\margin \vss}}\fi
234: \dimen@=\dp#1 \unvbox#1
235: \ifvoid\footins\else\vskip\skip\footins\footnoterule \unvbox\footins\fi
236: \ifr@ggedbottom \kern-\dimen@ \vfil \fi}
237: }
238:
239: % Here are the rules for the cropmarks. Note that they are
240: % offset so that the space between them is truly \outerhsize or \outervsize
241: % (P. A. MacKay, 12 November, 1986)
242: %
243: \def\ewtop{\vrule height\cornerthick depth0pt width\cornerlong}
244: \def\nstop{\vbox
245: {\hrule height\cornerthick depth\cornerlong width\cornerthick}}
246: \def\ewbot{\vrule height0pt depth\cornerthick width\cornerlong}
247: \def\nsbot{\vbox
248: {\hrule height\cornerlong depth\cornerthick width\cornerthick}}
249:
250: % Parse an argument, then pass it to #1. The argument is the rest of
251: % the input line (except we remove a trailing comment). #1 should be a
252: % macro which expects an ordinary undelimited TeX argument.
253: %
254: \def\parsearg#1{%
255: \let\next = #1%
256: \begingroup
257: \obeylines
258: \futurelet\temp\parseargx
259: }
260:
261: % If the next token is an obeyed space (from an @example environment or
262: % the like), remove it and recurse. Otherwise, we're done.
263: \def\parseargx{%
264: % \obeyedspace is defined far below, after the definition of \sepspaces.
265: \ifx\obeyedspace\temp
266: \expandafter\parseargdiscardspace
267: \else
268: \expandafter\parseargline
269: \fi
270: }
271:
272: % Remove a single space (as the delimiter token to the macro call).
273: {\obeyspaces %
274: \gdef\parseargdiscardspace {\futurelet\temp\parseargx}}
275:
276: {\obeylines %
277: \gdef\parseargline#1^^M{%
278: \endgroup % End of the group started in \parsearg.
279: %
280: % First remove any @c comment, then any @comment.
281: % Result of each macro is put in \toks0.
282: \argremovec #1\c\relax %
283: \expandafter\argremovecomment \the\toks0 \comment\relax %
284: %
285: % Call the caller's macro, saved as \next in \parsearg.
286: \expandafter\next\expandafter{\the\toks0}%
287: }%
288: }
289:
290: % Since all \c{,omment} does is throw away the argument, we can let TeX
291: % do that for us. The \relax here is matched by the \relax in the call
292: % in \parseargline; it could be more or less anything, its purpose is
293: % just to delimit the argument to the \c.
294: \def\argremovec#1\c#2\relax{\toks0 = {#1}}
295: \def\argremovecomment#1\comment#2\relax{\toks0 = {#1}}
296:
297: % \argremovec{,omment} might leave us with trailing spaces, though; e.g.,
298: % @end itemize @c foo
299: % will have two active spaces as part of the argument with the
300: % `itemize'. Here we remove all active spaces from #1, and assign the
301: % result to \toks0.
302: %
303: % This loses if there are any *other* active characters besides spaces
304: % in the argument -- _ ^ +, for example -- since they get expanded.
305: % Fortunately, Texinfo does not define any such commands. (If it ever
306: % does, the catcode of the characters in questionwill have to be changed
307: % here.) But this means we cannot call \removeactivespaces as part of
308: % \argremovec{,omment}, since @c uses \parsearg, and thus the argument
309: % that \parsearg gets might well have any character at all in it.
310: %
311: \def\removeactivespaces#1{%
312: \begingroup
313: \ignoreactivespaces
314: \edef\temp{#1}%
315: \global\toks0 = \expandafter{\temp}%
316: \endgroup
317: }
318:
319: % Change the active space to expand to nothing.
320: %
321: \begingroup
322: \obeyspaces
323: \gdef\ignoreactivespaces{\obeyspaces\let =\empty}
324: \endgroup
325:
326:
327: \def\flushcr{\ifx\par\lisppar \def\next##1{}\else \let\next=\relax \fi \next}
328:
329: %% These are used to keep @begin/@end levels from running away
330: %% Call \inENV within environments (after a \begingroup)
331: \newif\ifENV \ENVfalse \def\inENV{\ifENV\relax\else\ENVtrue\fi}
332: \def\ENVcheck{%
333: \ifENV\errmessage{Still within an environment. Type Return to continue.}
334: \endgroup\fi} % This is not perfect, but it should reduce lossage
335:
336: % @begin foo is the same as @foo, for now.
337: \newhelp\EMsimple{Type <Return> to continue.}
338:
339: \outer\def\begin{\parsearg\beginxxx}
340:
341: \def\beginxxx #1{%
342: \expandafter\ifx\csname #1\endcsname\relax
343: {\errhelp=\EMsimple \errmessage{Undefined command @begin #1}}\else
344: \csname #1\endcsname\fi}
345:
346: % @end foo executes the definition of \Efoo.
347: %
348: \def\end{\parsearg\endxxx}
349: \def\endxxx #1{%
350: \removeactivespaces{#1}%
351: \edef\endthing{\the\toks0}%
352: %
353: \expandafter\ifx\csname E\endthing\endcsname\relax
354: \expandafter\ifx\csname \endthing\endcsname\relax
355: % There's no \foo, i.e., no ``environment'' foo.
356: \errhelp = \EMsimple
357: \errmessage{Undefined command `@end \endthing'}%
358: \else
359: \unmatchedenderror\endthing
360: \fi
361: \else
362: % Everything's ok; the right environment has been started.
363: \csname E\endthing\endcsname
364: \fi
365: }
366:
367: % There is an environment #1, but it hasn't been started. Give an error.
368: %
369: \def\unmatchedenderror#1{%
370: \errhelp = \EMsimple
371: \errmessage{This `@end #1' doesn't have a matching `@#1'}%
372: }
373:
374: % Define the control sequence \E#1 to give an unmatched @end error.
375: %
376: \def\defineunmatchedend#1{%
377: \expandafter\def\csname E#1\endcsname{\unmatchedenderror{#1}}%
378: }
379:
380:
381: % Single-spacing is done by various environments (specifically, in
382: % \nonfillstart and \quotations).
383: \newskip\singlespaceskip \singlespaceskip = 12.5pt
384: \def\singlespace{%
385: % Why was this kern here? It messes up equalizing space above and below
386: % environments. --karl, 6may93
387: %{\advance \baselineskip by -\singlespaceskip
388: %\kern \baselineskip}%
389: \setleading \singlespaceskip
390: }
391:
392: %% Simple single-character @ commands
393:
394: % @@ prints an @
395: % Kludge this until the fonts are right (grr).
396: \def\@{{\tt \char '100}}
397:
398: % This is turned off because it was never documented
399: % and you can use @w{...} around a quote to suppress ligatures.
400: %% Define @` and @' to be the same as ` and '
401: %% but suppressing ligatures.
402: %\def\`{{`}}
403: %\def\'{{'}}
404:
405: % Used to generate quoted braces.
406: \def\mylbrace {{\tt \char '173}}
407: \def\myrbrace {{\tt \char '175}}
408: \let\{=\mylbrace
409: \let\}=\myrbrace
410: \begingroup
411: % Definitions to produce actual \{ & \} command in an index.
412: \catcode`\{ = 12 \catcode`\} = 12
413: \catcode`\[ = 1 \catcode`\] = 2
414: \catcode`\@ = 0 \catcode`\\ = 12
415: @gdef@lbracecmd[\{]%
416: @gdef@rbracecmd[\}]%
417: @endgroup
418:
419: % Accents: @, @dotaccent @ringaccent @ubaraccent @udotaccent
420: % Others are defined by plain TeX: @` @' @" @^ @~ @= @v @H.
421: \let\, = \c
422: \let\dotaccent = \.
423: \def\ringaccent#1{{\accent23 #1}}
424: \let\tieaccent = \t
425: \let\ubaraccent = \b
426: \let\udotaccent = \d
427:
428: % Other special characters: @questiondown @exclamdown
429: % Plain TeX defines: @AA @AE @O @OE @L (and lowercase versions) @ss.
430: \def\questiondown{?`}
431: \def\exclamdown{!`}
432:
433: % Dotless i and dotless j, used for accents.
434: \def\imacro{i}
435: \def\jmacro{j}
436: \def\dotless#1{%
437: \def\temp{#1}%
438: \ifx\temp\imacro \ptexi
439: \else\ifx\temp\jmacro \j
440: \else \errmessage{@dotless can be used only with i or j}%
441: \fi\fi
442: }
443:
444: % @: forces normal size whitespace following.
445: \def\:{\spacefactor=1000 }
446:
447: % @* forces a line break.
448: \def\*{\hfil\break\hbox{}\ignorespaces}
449:
450: % @. is an end-of-sentence period.
451: \def\.{.\spacefactor=3000 }
452:
453: % @! is an end-of-sentence bang.
1.2 ! anton 454: \def\!{!\spacefactor=3000 }
1.1 anton 455:
456: % @? is an end-of-sentence query.
1.2 ! anton 457: \def\?{?\spacefactor=3000 }
1.1 anton 458:
459: % @w prevents a word break. Without the \leavevmode, @w at the
460: % beginning of a paragraph, when TeX is still in vertical mode, would
461: % produce a whole line of output instead of starting the paragraph.
462: \def\w#1{\leavevmode\hbox{#1}}
463:
464: % @group ... @end group forces ... to be all on one page, by enclosing
465: % it in a TeX vbox. We use \vtop instead of \vbox to construct the box
466: % to keep its height that of a normal line. According to the rules for
467: % \topskip (p.114 of the TeXbook), the glue inserted is
468: % max (\topskip - \ht (first item), 0). If that height is large,
469: % therefore, no glue is inserted, and the space between the headline and
470: % the text is small, which looks bad.
471: %
472: \def\group{\begingroup
473: \ifnum\catcode13=\active \else
474: \errhelp = \groupinvalidhelp
475: \errmessage{@group invalid in context where filling is enabled}%
476: \fi
477: %
478: % The \vtop we start below produces a box with normal height and large
479: % depth; thus, TeX puts \baselineskip glue before it, and (when the
480: % next line of text is done) \lineskip glue after it. (See p.82 of
481: % the TeXbook.) Thus, space below is not quite equal to space
482: % above. But it's pretty close.
483: \def\Egroup{%
484: \egroup % End the \vtop.
485: \endgroup % End the \group.
486: }%
487: %
488: \vtop\bgroup
489: % We have to put a strut on the last line in case the @group is in
490: % the midst of an example, rather than completely enclosing it.
491: % Otherwise, the interline space between the last line of the group
492: % and the first line afterwards is too small. But we can't put the
493: % strut in \Egroup, since there it would be on a line by itself.
494: % Hence this just inserts a strut at the beginning of each line.
495: \everypar = {\strut}%
496: %
497: % Since we have a strut on every line, we don't need any of TeX's
498: % normal interline spacing.
499: \offinterlineskip
500: %
501: % OK, but now we have to do something about blank
502: % lines in the input in @example-like environments, which normally
503: % just turn into \lisppar, which will insert no space now that we've
504: % turned off the interline space. Simplest is to make them be an
505: % empty paragraph.
506: \ifx\par\lisppar
507: \edef\par{\leavevmode \par}%
508: %
509: % Reset ^^M's definition to new definition of \par.
510: \obeylines
511: \fi
512: %
513: % Do @comment since we are called inside an environment such as
514: % @example, where each end-of-line in the input causes an
515: % end-of-line in the output. We don't want the end-of-line after
516: % the `@group' to put extra space in the output. Since @group
517: % should appear on a line by itself (according to the Texinfo
518: % manual), we don't worry about eating any user text.
519: \comment
520: }
521: %
522: % TeX puts in an \escapechar (i.e., `@') at the beginning of the help
523: % message, so this ends up printing `@group can only ...'.
524: %
525: \newhelp\groupinvalidhelp{%
526: group can only be used in environments such as @example,^^J%
527: where each line of input produces a line of output.}
528:
529: % @need space-in-mils
530: % forces a page break if there is not space-in-mils remaining.
531:
532: \newdimen\mil \mil=0.001in
533:
534: \def\need{\parsearg\needx}
535:
536: % Old definition--didn't work.
537: %\def\needx #1{\par %
538: %% This method tries to make TeX break the page naturally
539: %% if the depth of the box does not fit.
540: %{\baselineskip=0pt%
541: %\vtop to #1\mil{\vfil}\kern -#1\mil\penalty 10000
542: %\prevdepth=-1000pt
543: %}}
544:
545: \def\needx#1{%
546: % Go into vertical mode, so we don't make a big box in the middle of a
547: % paragraph.
548: \par
549: %
550: % Don't add any leading before our big empty box, but allow a page
551: % break, since the best break might be right here.
552: \allowbreak
553: \nointerlineskip
554: \vtop to #1\mil{\vfil}%
555: %
556: % TeX does not even consider page breaks if a penalty added to the
557: % main vertical list is 10000 or more. But in order to see if the
558: % empty box we just added fits on the page, we must make it consider
559: % page breaks. On the other hand, we don't want to actually break the
560: % page after the empty box. So we use a penalty of 9999.
561: %
562: % There is an extremely small chance that TeX will actually break the
563: % page at this \penalty, if there are no other feasible breakpoints in
564: % sight. (If the user is using lots of big @group commands, which
565: % almost-but-not-quite fill up a page, TeX will have a hard time doing
566: % good page breaking, for example.) However, I could not construct an
567: % example where a page broke at this \penalty; if it happens in a real
568: % document, then we can reconsider our strategy.
569: \penalty9999
570: %
571: % Back up by the size of the box, whether we did a page break or not.
572: \kern -#1\mil
573: %
574: % Do not allow a page break right after this kern.
575: \nobreak
576: }
577:
578: % @br forces paragraph break
579:
580: \let\br = \par
581:
1.2 ! anton 582: % @dots{} output an ellipsis using the current font.
! 583: % We do .5em per period so that it has the same spacing in a typewriter
! 584: % font as three actual period characters.
! 585: %
! 586: \def\dots{\hbox to 1.5em{%
! 587: \hskip 0pt plus 0.25fil minus 0.25fil
! 588: .\hss.\hss.%
! 589: \hskip 0pt plus 0.5fil minus 0.5fil
! 590: }}
! 591:
! 592: % @enddots{} is an end-of-sentence ellipsis.
! 593: %
! 594: \def\enddots{%
! 595: \hbox to 2em{%
! 596: \hskip 0pt plus 0.25fil minus 0.25fil
! 597: .\hss.\hss.\hss.%
! 598: \hskip 0pt plus 0.5fil minus 0.5fil
! 599: }%
! 600: \spacefactor=3000
! 601: }
1.1 anton 602:
603:
604: % @page forces the start of a new page
605:
606: \def\page{\par\vfill\supereject}
607:
608: % @exdent text....
609: % outputs text on separate line in roman font, starting at standard page margin
610:
611: % This records the amount of indent in the innermost environment.
612: % That's how much \exdent should take out.
613: \newskip\exdentamount
614:
615: % This defn is used inside fill environments such as @defun.
616: \def\exdent{\parsearg\exdentyyy}
617: \def\exdentyyy #1{{\hfil\break\hbox{\kern -\exdentamount{\rm#1}}\hfil\break}}
618:
619: % This defn is used inside nofill environments such as @example.
620: \def\nofillexdent{\parsearg\nofillexdentyyy}
621: \def\nofillexdentyyy #1{{\advance \leftskip by -\exdentamount
622: \leftline{\hskip\leftskip{\rm#1}}}}
623:
624: % @inmargin{TEXT} puts TEXT in the margin next to the current paragraph.
625:
626: \def\inmargin#1{%
627: \strut\vadjust{\nobreak\kern-\strutdepth
628: \vtop to \strutdepth{\baselineskip\strutdepth\vss
629: \llap{\rightskip=\inmarginspacing \vbox{\noindent #1}}\null}}}
630: \newskip\inmarginspacing \inmarginspacing=1cm
631: \def\strutdepth{\dp\strutbox}
632:
633: %\hbox{{\rm#1}}\hfil\break}}
634:
635: % @include file insert text of that file as input.
636: % Allow normal characters that we make active in the argument (a file name).
637: \def\include{\begingroup
638: \catcode`\\=12
639: \catcode`~=12
640: \catcode`^=12
641: \catcode`_=12
642: \catcode`|=12
643: \catcode`<=12
644: \catcode`>=12
645: \catcode`+=12
646: \parsearg\includezzz}
647: % Restore active chars for included file.
648: \def\includezzz#1{\endgroup\begingroup
649: % Read the included file in a group so nested @include's work.
650: \def\thisfile{#1}%
651: \input\thisfile
652: \endgroup}
653:
654: \def\thisfile{}
655:
656: % @center line outputs that line, centered
657:
658: \def\center{\parsearg\centerzzz}
659: \def\centerzzz #1{{\advance\hsize by -\leftskip
660: \advance\hsize by -\rightskip
661: \centerline{#1}}}
662:
663: % @sp n outputs n lines of vertical space
664:
665: \def\sp{\parsearg\spxxx}
666: \def\spxxx #1{\vskip #1\baselineskip}
667:
668: % @comment ...line which is ignored...
669: % @c is the same as @comment
670: % @ignore ... @end ignore is another way to write a comment
671:
672: \def\comment{\catcode 64=\other \catcode 123=\other \catcode 125=\other%
673: \parsearg \commentxxx}
674:
675: \def\commentxxx #1{\catcode 64=0 \catcode 123=1 \catcode 125=2 }
676:
677: \let\c=\comment
678:
679: % @paragraphindent is defined for the Info formatting commands only.
680: \let\paragraphindent=\comment
681:
682: % Prevent errors for section commands.
683: % Used in @ignore and in failing conditionals.
684: \def\ignoresections{%
685: \let\chapter=\relax
686: \let\unnumbered=\relax
687: \let\top=\relax
688: \let\unnumberedsec=\relax
689: \let\unnumberedsection=\relax
690: \let\unnumberedsubsec=\relax
691: \let\unnumberedsubsection=\relax
692: \let\unnumberedsubsubsec=\relax
693: \let\unnumberedsubsubsection=\relax
694: \let\section=\relax
695: \let\subsec=\relax
696: \let\subsubsec=\relax
697: \let\subsection=\relax
698: \let\subsubsection=\relax
699: \let\appendix=\relax
700: \let\appendixsec=\relax
701: \let\appendixsection=\relax
702: \let\appendixsubsec=\relax
703: \let\appendixsubsection=\relax
704: \let\appendixsubsubsec=\relax
705: \let\appendixsubsubsection=\relax
706: \let\contents=\relax
707: \let\smallbook=\relax
708: \let\titlepage=\relax
709: }
710:
711: % Used in nested conditionals, where we have to parse the Texinfo source
712: % and so want to turn off most commands, in case they are used
713: % incorrectly.
714: %
715: \def\ignoremorecommands{%
716: \let\defcodeindex = \relax
717: \let\defcv = \relax
718: \let\deffn = \relax
719: \let\deffnx = \relax
720: \let\defindex = \relax
721: \let\defivar = \relax
722: \let\defmac = \relax
723: \let\defmethod = \relax
724: \let\defop = \relax
725: \let\defopt = \relax
726: \let\defspec = \relax
727: \let\deftp = \relax
728: \let\deftypefn = \relax
729: \let\deftypefun = \relax
730: \let\deftypevar = \relax
731: \let\deftypevr = \relax
732: \let\defun = \relax
733: \let\defvar = \relax
734: \let\defvr = \relax
735: \let\ref = \relax
736: \let\xref = \relax
737: \let\printindex = \relax
738: \let\pxref = \relax
739: \let\settitle = \relax
740: \let\setchapternewpage = \relax
741: \let\setchapterstyle = \relax
742: \let\everyheading = \relax
743: \let\evenheading = \relax
744: \let\oddheading = \relax
745: \let\everyfooting = \relax
746: \let\evenfooting = \relax
747: \let\oddfooting = \relax
748: \let\headings = \relax
749: \let\include = \relax
750: \let\lowersections = \relax
751: \let\down = \relax
752: \let\raisesections = \relax
753: \let\up = \relax
754: \let\set = \relax
755: \let\clear = \relax
756: \let\item = \relax
757: }
758:
759: % Ignore @ignore ... @end ignore.
760: %
761: \def\ignore{\doignore{ignore}}
762:
1.2 ! anton 763: % Ignore @ifinfo, @ifhtml, @ifnottex, @html, @menu, and @direntry text.
1.1 anton 764: %
765: \def\ifinfo{\doignore{ifinfo}}
766: \def\ifhtml{\doignore{ifhtml}}
1.2 ! anton 767: \def\ifnottex{\doignore{ifnottex}}
1.1 anton 768: \def\html{\doignore{html}}
769: \def\menu{\doignore{menu}}
770: \def\direntry{\doignore{direntry}}
771:
772: % Also ignore @macro ... @end macro. The user must run texi2dvi,
773: % which runs makeinfo to do macro expansion. Ignore @unmacro, too.
774: \def\macro{\doignore{macro}}
775: \let\unmacro = \comment
776:
777:
778: % @dircategory CATEGORY -- specify a category of the dir file
779: % which this file should belong to. Ignore this in TeX.
780: \let\dircategory = \comment
781:
782: % Ignore text until a line `@end #1'.
783: %
784: \def\doignore#1{\begingroup
785: % Don't complain about control sequences we have declared \outer.
786: \ignoresections
787: %
788: % Define a command to swallow text until we reach `@end #1'.
789: \long\def\doignoretext##1\end #1{\enddoignore}%
790: %
791: % Make sure that spaces turn into tokens that match what \doignoretext wants.
792: \catcode32 = 10
793: %
1.2 ! anton 794: % Ignore braces, too, so mismatched braces don't cause trouble.
! 795: \catcode`\{ = 9
! 796: \catcode`\} = 9
! 797: %
1.1 anton 798: % And now expand that command.
799: \doignoretext
800: }
801:
802: % What we do to finish off ignored text.
803: %
804: \def\enddoignore{\endgroup\ignorespaces}%
805:
806: \newif\ifwarnedobs\warnedobsfalse
807: \def\obstexwarn{%
808: \ifwarnedobs\relax\else
809: % We need to warn folks that they may have trouble with TeX 3.0.
810: % This uses \immediate\write16 rather than \message to get newlines.
811: \immediate\write16{}
812: \immediate\write16{***WARNING*** for users of Unix TeX 3.0!}
813: \immediate\write16{This manual trips a bug in TeX version 3.0 (tex hangs).}
814: \immediate\write16{If you are running another version of TeX, relax.}
815: \immediate\write16{If you are running Unix TeX 3.0, kill this TeX process.}
816: \immediate\write16{ Then upgrade your TeX installation if you can.}
817: \immediate\write16{ (See ftp://ftp.gnu.ai.mit.edu/pub/gnu/TeX.README.)}
818: \immediate\write16{If you are stuck with version 3.0, run the}
819: \immediate\write16{ script ``tex3patch'' from the Texinfo distribution}
820: \immediate\write16{ to use a workaround.}
821: \immediate\write16{}
822: \global\warnedobstrue
823: \fi
824: }
825:
826: % **In TeX 3.0, setting text in \nullfont hangs tex. For a
827: % workaround (which requires the file ``dummy.tfm'' to be installed),
828: % uncomment the following line:
829: %%%%%\font\nullfont=dummy\let\obstexwarn=\relax
830:
831: % Ignore text, except that we keep track of conditional commands for
832: % purposes of nesting, up to an `@end #1' command.
833: %
834: \def\nestedignore#1{%
835: \obstexwarn
836: % We must actually expand the ignored text to look for the @end
837: % command, so that nested ignore constructs work. Thus, we put the
838: % text into a \vbox and then do nothing with the result. To minimize
839: % the change of memory overflow, we follow the approach outlined on
840: % page 401 of the TeXbook: make the current font be a dummy font.
841: %
842: \setbox0 = \vbox\bgroup
843: % Don't complain about control sequences we have declared \outer.
844: \ignoresections
845: %
846: % Define `@end #1' to end the box, which will in turn undefine the
847: % @end command again.
848: \expandafter\def\csname E#1\endcsname{\egroup\ignorespaces}%
849: %
850: % We are going to be parsing Texinfo commands. Most cause no
851: % trouble when they are used incorrectly, but some commands do
852: % complicated argument parsing or otherwise get confused, so we
853: % undefine them.
854: %
855: % We can't do anything about stray @-signs, unfortunately;
856: % they'll produce `undefined control sequence' errors.
857: \ignoremorecommands
858: %
859: % Set the current font to be \nullfont, a TeX primitive, and define
860: % all the font commands to also use \nullfont. We don't use
861: % dummy.tfm, as suggested in the TeXbook, because not all sites
862: % might have that installed. Therefore, math mode will still
863: % produce output, but that should be an extremely small amount of
864: % stuff compared to the main input.
865: %
866: \nullfont
867: \let\tenrm = \nullfont \let\tenit = \nullfont \let\tensl = \nullfont
868: \let\tenbf = \nullfont \let\tentt = \nullfont \let\smallcaps = \nullfont
869: \let\tensf = \nullfont
870: % Similarly for index fonts (mostly for their use in
871: % smallexample)
872: \let\indrm = \nullfont \let\indit = \nullfont \let\indsl = \nullfont
873: \let\indbf = \nullfont \let\indtt = \nullfont \let\indsc = \nullfont
874: \let\indsf = \nullfont
875: %
876: % Don't complain when characters are missing from the fonts.
877: \tracinglostchars = 0
878: %
879: % Don't bother to do space factor calculations.
880: \frenchspacing
881: %
882: % Don't report underfull hboxes.
883: \hbadness = 10000
884: %
885: % Do minimal line-breaking.
886: \pretolerance = 10000
887: %
888: % Do not execute instructions in @tex
1.2 ! anton 889: \def\tex{\doignore{tex}}%
1.1 anton 890: }
891:
892: % @set VAR sets the variable VAR to an empty value.
893: % @set VAR REST-OF-LINE sets VAR to the value REST-OF-LINE.
894: %
895: % Since we want to separate VAR from REST-OF-LINE (which might be
896: % empty), we can't just use \parsearg; we have to insert a space of our
897: % own to delimit the rest of the line, and then take it out again if we
898: % didn't need it. Make sure the catcode of space is correct to avoid
899: % losing inside @example, for instance.
900: %
1.2 ! anton 901: \def\set{\begingroup\catcode` =10
! 902: \catcode`\-=12 \catcode`\_=12 % Allow - and _ in VAR.
! 903: \parsearg\setxxx}
1.1 anton 904: \def\setxxx#1{\setyyy#1 \endsetyyy}
905: \def\setyyy#1 #2\endsetyyy{%
906: \def\temp{#2}%
907: \ifx\temp\empty \global\expandafter\let\csname SET#1\endcsname = \empty
908: \else \setzzz{#1}#2\endsetzzz % Remove the trailing space \setxxx inserted.
909: \fi
910: \endgroup
911: }
912: % Can't use \xdef to pre-expand #2 and save some time, since \temp or
913: % \next or other control sequences that we've defined might get us into
914: % an infinite loop. Consider `@set foo @cite{bar}'.
915: \def\setzzz#1#2 \endsetzzz{\expandafter\gdef\csname SET#1\endcsname{#2}}
916:
917: % @clear VAR clears (i.e., unsets) the variable VAR.
918: %
919: \def\clear{\parsearg\clearxxx}
920: \def\clearxxx#1{\global\expandafter\let\csname SET#1\endcsname=\relax}
921:
922: % @value{foo} gets the text saved in variable foo.
923: %
1.2 ! anton 924: \def\value{\begingroup
! 925: \catcode`\-=12 \catcode`\_=12 % Allow - and _ in VAR.
! 926: \valuexxx}
! 927: \def\valuexxx#1{%
! 928: \expandafter\ifx\csname SET#1\endcsname\relax
! 929: {\{No value for ``#1''\}}%
! 930: \else
! 931: \csname SET#1\endcsname
! 932: \fi
! 933: \endgroup}
1.1 anton 934:
935: % @ifset VAR ... @end ifset reads the `...' iff VAR has been defined
936: % with @set.
937: %
938: \def\ifset{\parsearg\ifsetxxx}
939: \def\ifsetxxx #1{%
940: \expandafter\ifx\csname SET#1\endcsname\relax
941: \expandafter\ifsetfail
942: \else
943: \expandafter\ifsetsucceed
944: \fi
945: }
946: \def\ifsetsucceed{\conditionalsucceed{ifset}}
947: \def\ifsetfail{\nestedignore{ifset}}
948: \defineunmatchedend{ifset}
949:
950: % @ifclear VAR ... @end ifclear reads the `...' iff VAR has never been
951: % defined with @set, or has been undefined with @clear.
952: %
953: \def\ifclear{\parsearg\ifclearxxx}
954: \def\ifclearxxx #1{%
955: \expandafter\ifx\csname SET#1\endcsname\relax
956: \expandafter\ifclearsucceed
957: \else
958: \expandafter\ifclearfail
959: \fi
960: }
961: \def\ifclearsucceed{\conditionalsucceed{ifclear}}
962: \def\ifclearfail{\nestedignore{ifclear}}
963: \defineunmatchedend{ifclear}
964:
1.2 ! anton 965: % @iftex, @ifnothtml, @ifnotinfo always succeed; we read the text
! 966: % following, through the first @end iftex (etc.). Make `@end iftex'
! 967: % (etc.) valid only after an @iftex.
1.1 anton 968: %
969: \def\iftex{\conditionalsucceed{iftex}}
1.2 ! anton 970: \def\ifnothtml{\conditionalsucceed{ifnothtml}}
! 971: \def\ifnotinfo{\conditionalsucceed{ifnotinfo}}
1.1 anton 972: \defineunmatchedend{iftex}
1.2 ! anton 973: \defineunmatchedend{ifnothtml}
! 974: \defineunmatchedend{ifnotinfo}
1.1 anton 975:
976: % We can't just want to start a group at @iftex (for example) and end it
977: % at @end iftex, since then @set commands inside the conditional have no
978: % effect (they'd get reverted at the end of the group). So we must
979: % define \Eiftex to redefine itself to be its previous value. (We can't
980: % just define it to fail again with an ``unmatched end'' error, since
981: % the @ifset might be nested.)
982: %
983: \def\conditionalsucceed#1{%
984: \edef\temp{%
985: % Remember the current value of \E#1.
986: \let\nece{prevE#1} = \nece{E#1}%
987: %
988: % At the `@end #1', redefine \E#1 to be its previous value.
989: \def\nece{E#1}{\let\nece{E#1} = \nece{prevE#1}}%
990: }%
991: \temp
992: }
993:
994: % We need to expand lots of \csname's, but we don't want to expand the
995: % control sequences after we've constructed them.
996: %
997: \def\nece#1{\expandafter\noexpand\csname#1\endcsname}
998:
999: % @asis just yields its argument. Used with @table, for example.
1000: %
1001: \def\asis#1{#1}
1002:
1003: % @math means output in math mode.
1004: % We don't use $'s directly in the definition of \math because control
1005: % sequences like \math are expanded when the toc file is written. Then,
1006: % we read the toc file back, the $'s will be normal characters (as they
1007: % should be, according to the definition of Texinfo). So we must use a
1008: % control sequence to switch into and out of math mode.
1009: %
1010: % This isn't quite enough for @math to work properly in indices, but it
1011: % seems unlikely it will ever be needed there.
1012: %
1013: \let\implicitmath = $
1014: \def\math#1{\implicitmath #1\implicitmath}
1015:
1016: % @bullet and @minus need the same treatment as @math, just above.
1017: \def\bullet{\implicitmath\ptexbullet\implicitmath}
1018: \def\minus{\implicitmath-\implicitmath}
1019:
1020: \def\node{\ENVcheck\parsearg\nodezzz}
1021: \def\nodezzz#1{\nodexxx [#1,]}
1022: \def\nodexxx[#1,#2]{\gdef\lastnode{#1}}
1023: \let\nwnode=\node
1024: \let\lastnode=\relax
1025:
1026: \def\donoderef{\ifx\lastnode\relax\else
1027: \expandafter\expandafter\expandafter\setref{\lastnode}\fi
1028: \global\let\lastnode=\relax}
1029:
1030: \def\unnumbnoderef{\ifx\lastnode\relax\else
1031: \expandafter\expandafter\expandafter\unnumbsetref{\lastnode}\fi
1032: \global\let\lastnode=\relax}
1033:
1034: \def\appendixnoderef{\ifx\lastnode\relax\else
1035: \expandafter\expandafter\expandafter\appendixsetref{\lastnode}\fi
1036: \global\let\lastnode=\relax}
1037:
1038: % @refill is a no-op.
1039: \let\refill=\relax
1040:
1041: % @setfilename is done at the beginning of every texinfo file.
1042: % So open here the files we need to have open while reading the input.
1043: % This makes it possible to make a .fmt file for texinfo.
1044: \def\setfilename{%
1045: \readauxfile
1046: \opencontents
1047: \openindices
1048: \fixbackslash % Turn off hack to swallow `\input texinfo'.
1049: \global\let\setfilename=\comment % Ignore extra @setfilename cmds.
1.2 ! anton 1050: %
! 1051: % If texinfo.cnf is present on the system, read it.
! 1052: % Useful for site-wide @afourpaper, etc.
! 1053: % Just to be on the safe side, close the input stream before the \input.
! 1054: \openin 1 texinfo.cnf
! 1055: \ifeof1 \let\temp=\relax \else \def\temp{\input texinfo.cnf }\fi
! 1056: \closein1
! 1057: \temp
! 1058: %
1.1 anton 1059: \comment % Ignore the actual filename.
1060: }
1061:
1062: % @bye.
1063: \outer\def\bye{\pagealignmacro\tracingstats=1\ptexend}
1064:
1065: % \def\macro#1{\begingroup\ignoresections\catcode`\#=6\def\macrotemp{#1}\parsearg\macroxxx}
1066: % \def\macroxxx#1#2 \end macro{%
1067: % \expandafter\gdef\macrotemp#1{#2}%
1068: % \endgroup}
1069:
1070: %\def\linemacro#1{\begingroup\ignoresections\catcode`\#=6\def\macrotemp{#1}\parsearg\linemacroxxx}
1071: %\def\linemacroxxx#1#2 \end linemacro{%
1072: %\let\parsearg=\relax
1073: %\edef\macrotempx{\csname M\butfirst\expandafter\string\macrotemp\endcsname}%
1074: %\expandafter\xdef\macrotemp{\parsearg\macrotempx}%
1075: %\expandafter\gdef\macrotempx#1{#2}%
1076: %\endgroup}
1077:
1078: %\def\butfirst#1{}
1079:
1080:
1081: \message{fonts,}
1082:
1083: % Font-change commands.
1084:
1085: % Texinfo supports the sans serif font style, which plain TeX does not.
1086: % So we set up a \sf analogous to plain's \rm, etc.
1087: \newfam\sffam
1088: \def\sf{\fam=\sffam \tensf}
1089: \let\li = \sf % Sometimes we call it \li, not \sf.
1090:
1091: % We don't need math for this one.
1092: \def\ttsl{\tenttsl}
1093:
1.2 ! anton 1094: % Use Computer Modern fonts at \magstephalf (11pt).
! 1095: \newcount\mainmagstep
! 1096: \mainmagstep=\magstephalf
1.1 anton 1097:
1098: % Set the font macro #1 to the font named #2, adding on the
1099: % specified font prefix (normally `cm').
1100: % #3 is the font's design size, #4 is a scale factor
1101: \def\setfont#1#2#3#4{\font#1=\fontprefix#2#3 scaled #4}
1102:
1103: % Use cm as the default font prefix.
1104: % To specify the font prefix, you must define \fontprefix
1105: % before you read in texinfo.tex.
1106: \ifx\fontprefix\undefined
1107: \def\fontprefix{cm}
1108: \fi
1109: % Support font families that don't use the same naming scheme as CM.
1110: \def\rmshape{r}
1111: \def\rmbshape{bx} %where the normal face is bold
1112: \def\bfshape{b}
1113: \def\bxshape{bx}
1114: \def\ttshape{tt}
1115: \def\ttbshape{tt}
1116: \def\ttslshape{sltt}
1117: \def\itshape{ti}
1118: \def\itbshape{bxti}
1119: \def\slshape{sl}
1120: \def\slbshape{bxsl}
1121: \def\sfshape{ss}
1122: \def\sfbshape{ss}
1123: \def\scshape{csc}
1124: \def\scbshape{csc}
1125:
1126: \ifx\bigger\relax
1127: \let\mainmagstep=\magstep1
1128: \setfont\textrm\rmshape{12}{1000}
1129: \setfont\texttt\ttshape{12}{1000}
1130: \else
1131: \setfont\textrm\rmshape{10}{\mainmagstep}
1132: \setfont\texttt\ttshape{10}{\mainmagstep}
1133: \fi
1134: % Instead of cmb10, you many want to use cmbx10.
1135: % cmbx10 is a prettier font on its own, but cmb10
1136: % looks better when embedded in a line with cmr10.
1137: \setfont\textbf\bfshape{10}{\mainmagstep}
1138: \setfont\textit\itshape{10}{\mainmagstep}
1139: \setfont\textsl\slshape{10}{\mainmagstep}
1140: \setfont\textsf\sfshape{10}{\mainmagstep}
1141: \setfont\textsc\scshape{10}{\mainmagstep}
1142: \setfont\textttsl\ttslshape{10}{\mainmagstep}
1143: \font\texti=cmmi10 scaled \mainmagstep
1144: \font\textsy=cmsy10 scaled \mainmagstep
1145:
1146: % A few fonts for @defun, etc.
1147: \setfont\defbf\bxshape{10}{\magstep1} %was 1314
1148: \setfont\deftt\ttshape{10}{\magstep1}
1149: \def\df{\let\tentt=\deftt \let\tenbf = \defbf \bf}
1150:
1151: % Fonts for indices and small examples (9pt).
1152: % We actually use the slanted font rather than the italic,
1153: % because texinfo normally uses the slanted fonts for that.
1154: % Do not make many font distinctions in general in the index, since they
1155: % aren't very useful.
1156: \setfont\ninett\ttshape{9}{1000}
1157: \setfont\indrm\rmshape{9}{1000}
1158: \setfont\indit\slshape{9}{1000}
1159: \let\indsl=\indit
1160: \let\indtt=\ninett
1161: \let\indttsl=\ninett
1162: \let\indsf=\indrm
1163: \let\indbf=\indrm
1164: \setfont\indsc\scshape{10}{900}
1165: \font\indi=cmmi9
1166: \font\indsy=cmsy9
1167:
1.2 ! anton 1168: % Fonts for title page:
! 1169: \setfont\titlerm\rmbshape{12}{\magstep3}
! 1170: \setfont\titleit\itbshape{10}{\magstep4}
! 1171: \setfont\titlesl\slbshape{10}{\magstep4}
! 1172: \setfont\titlett\ttbshape{12}{\magstep3}
! 1173: \setfont\titlettsl\ttslshape{10}{\magstep4}
! 1174: \setfont\titlesf\sfbshape{17}{\magstep1}
! 1175: \let\titlebf=\titlerm
! 1176: \setfont\titlesc\scbshape{10}{\magstep4}
! 1177: \font\titlei=cmmi12 scaled \magstep3
! 1178: \font\titlesy=cmsy10 scaled \magstep4
! 1179: \def\authorrm{\secrm}
! 1180:
1.1 anton 1181: % Chapter (and unnumbered) fonts (17.28pt).
1182: \setfont\chaprm\rmbshape{12}{\magstep2}
1183: \setfont\chapit\itbshape{10}{\magstep3}
1184: \setfont\chapsl\slbshape{10}{\magstep3}
1185: \setfont\chaptt\ttbshape{12}{\magstep2}
1186: \setfont\chapttsl\ttslshape{10}{\magstep3}
1.2 ! anton 1187: \setfont\chapsf\sfbshape{17}{1000}
1.1 anton 1188: \let\chapbf=\chaprm
1189: \setfont\chapsc\scbshape{10}{\magstep3}
1190: \font\chapi=cmmi12 scaled \magstep2
1191: \font\chapsy=cmsy10 scaled \magstep3
1192:
1193: % Section fonts (14.4pt).
1194: \setfont\secrm\rmbshape{12}{\magstep1}
1195: \setfont\secit\itbshape{10}{\magstep2}
1196: \setfont\secsl\slbshape{10}{\magstep2}
1197: \setfont\sectt\ttbshape{12}{\magstep1}
1198: \setfont\secttsl\ttslshape{10}{\magstep2}
1199: \setfont\secsf\sfbshape{12}{\magstep1}
1200: \let\secbf\secrm
1201: \setfont\secsc\scbshape{10}{\magstep2}
1202: \font\seci=cmmi12 scaled \magstep1
1203: \font\secsy=cmsy10 scaled \magstep2
1204:
1205: % \setfont\ssecrm\bxshape{10}{\magstep1} % This size an font looked bad.
1206: % \setfont\ssecit\itshape{10}{\magstep1} % The letters were too crowded.
1207: % \setfont\ssecsl\slshape{10}{\magstep1}
1208: % \setfont\ssectt\ttshape{10}{\magstep1}
1209: % \setfont\ssecsf\sfshape{10}{\magstep1}
1210:
1211: %\setfont\ssecrm\bfshape{10}{1315} % Note the use of cmb rather than cmbx.
1212: %\setfont\ssecit\itshape{10}{1315} % Also, the size is a little larger than
1213: %\setfont\ssecsl\slshape{10}{1315} % being scaled magstep1.
1214: %\setfont\ssectt\ttshape{10}{1315}
1215: %\setfont\ssecsf\sfshape{10}{1315}
1216:
1217: %\let\ssecbf=\ssecrm
1218:
1219: % Subsection fonts (13.15pt).
1220: \setfont\ssecrm\rmbshape{12}{\magstephalf}
1221: \setfont\ssecit\itbshape{10}{1315}
1222: \setfont\ssecsl\slbshape{10}{1315}
1223: \setfont\ssectt\ttbshape{12}{\magstephalf}
1.2 ! anton 1224: \setfont\ssecttsl\ttslshape{10}{1315}
1.1 anton 1225: \setfont\ssecsf\sfbshape{12}{\magstephalf}
1226: \let\ssecbf\ssecrm
1227: \setfont\ssecsc\scbshape{10}{\magstep1}
1228: \font\sseci=cmmi12 scaled \magstephalf
1.2 ! anton 1229: \font\ssecsy=cmsy10 scaled 1315
1.1 anton 1230: % The smallcaps and symbol fonts should actually be scaled \magstep1.5,
1231: % but that is not a standard magnification.
1232:
1233: % In order for the font changes to affect most math symbols and letters,
1234: % we have to define the \textfont of the standard families. Since
1235: % texinfo doesn't allow for producing subscripts and superscripts, we
1236: % don't bother to reset \scriptfont and \scriptscriptfont (which would
1237: % also require loading a lot more fonts).
1238: %
1239: \def\resetmathfonts{%
1240: \textfont0 = \tenrm \textfont1 = \teni \textfont2 = \tensy
1241: \textfont\itfam = \tenit \textfont\slfam = \tensl \textfont\bffam = \tenbf
1242: \textfont\ttfam = \tentt \textfont\sffam = \tensf
1243: }
1244:
1245:
1246: % The font-changing commands redefine the meanings of \tenSTYLE, instead
1247: % of just \STYLE. We do this so that font changes will continue to work
1248: % in math mode, where it is the current \fam that is relevant in most
1249: % cases, not the current font. Plain TeX does \def\bf{\fam=\bffam
1250: % \tenbf}, for example. By redefining \tenbf, we obviate the need to
1251: % redefine \bf itself.
1252: \def\textfonts{%
1253: \let\tenrm=\textrm \let\tenit=\textit \let\tensl=\textsl
1254: \let\tenbf=\textbf \let\tentt=\texttt \let\smallcaps=\textsc
1255: \let\tensf=\textsf \let\teni=\texti \let\tensy=\textsy \let\tenttsl=\textttsl
1256: \resetmathfonts}
1.2 ! anton 1257: \def\titlefonts{%
! 1258: \let\tenrm=\titlerm \let\tenit=\titleit \let\tensl=\titlesl
! 1259: \let\tenbf=\titlebf \let\tentt=\titlett \let\smallcaps=\titlesc
! 1260: \let\tensf=\titlesf \let\teni=\titlei \let\tensy=\titlesy
! 1261: \let\tenttsl=\titlettsl
! 1262: \resetmathfonts \setleading{25pt}}
! 1263: \def\titlefont#1{{\titlefonts\rm #1}}
1.1 anton 1264: \def\chapfonts{%
1265: \let\tenrm=\chaprm \let\tenit=\chapit \let\tensl=\chapsl
1266: \let\tenbf=\chapbf \let\tentt=\chaptt \let\smallcaps=\chapsc
1267: \let\tensf=\chapsf \let\teni=\chapi \let\tensy=\chapsy \let\tenttsl=\chapttsl
1268: \resetmathfonts \setleading{19pt}}
1269: \def\secfonts{%
1270: \let\tenrm=\secrm \let\tenit=\secit \let\tensl=\secsl
1271: \let\tenbf=\secbf \let\tentt=\sectt \let\smallcaps=\secsc
1272: \let\tensf=\secsf \let\teni=\seci \let\tensy=\secsy \let\tenttsl=\secttsl
1273: \resetmathfonts \setleading{16pt}}
1274: \def\subsecfonts{%
1275: \let\tenrm=\ssecrm \let\tenit=\ssecit \let\tensl=\ssecsl
1276: \let\tenbf=\ssecbf \let\tentt=\ssectt \let\smallcaps=\ssecsc
1277: \let\tensf=\ssecsf \let\teni=\sseci \let\tensy=\ssecsy \let\tenttsl=\ssecttsl
1278: \resetmathfonts \setleading{15pt}}
1279: \let\subsubsecfonts = \subsecfonts % Maybe make sssec fonts scaled magstephalf?
1280: \def\indexfonts{%
1281: \let\tenrm=\indrm \let\tenit=\indit \let\tensl=\indsl
1282: \let\tenbf=\indbf \let\tentt=\indtt \let\smallcaps=\indsc
1283: \let\tensf=\indsf \let\teni=\indi \let\tensy=\indsy \let\tenttsl=\indttsl
1284: \resetmathfonts \setleading{12pt}}
1285:
1286: % Set up the default fonts, so we can use them for creating boxes.
1287: %
1288: \textfonts
1289:
1.2 ! anton 1290: % Define these so they can be easily changed for other fonts.
! 1291: \def\angleleft{$\langle$}
! 1292: \def\angleright{$\rangle$}
! 1293:
1.1 anton 1294: % Count depth in font-changes, for error checks
1295: \newcount\fontdepth \fontdepth=0
1296:
1297: % Fonts for short table of contents.
1298: \setfont\shortcontrm\rmshape{12}{1000}
1299: \setfont\shortcontbf\bxshape{12}{1000}
1300: \setfont\shortcontsl\slshape{12}{1000}
1301:
1302: %% Add scribe-like font environments, plus @l for inline lisp (usually sans
1303: %% serif) and @ii for TeX italic
1304:
1305: % \smartitalic{ARG} outputs arg in italics, followed by an italic correction
1306: % unless the following character is such as not to need one.
1307: \def\smartitalicx{\ifx\next,\else\ifx\next-\else\ifx\next.\else\/\fi\fi\fi}
1308: \def\smartitalic#1{{\sl #1}\futurelet\next\smartitalicx}
1309:
1310: \let\i=\smartitalic
1311: \let\var=\smartitalic
1312: \let\dfn=\smartitalic
1313: \let\emph=\smartitalic
1314: \let\cite=\smartitalic
1315:
1316: \def\b#1{{\bf #1}}
1317: \let\strong=\b
1318:
1319: % We can't just use \exhyphenpenalty, because that only has effect at
1320: % the end of a paragraph. Restore normal hyphenation at the end of the
1321: % group within which \nohyphenation is presumably called.
1322: %
1323: \def\nohyphenation{\hyphenchar\font = -1 \aftergroup\restorehyphenation}
1324: \def\restorehyphenation{\hyphenchar\font = `- }
1325:
1326: \def\t#1{%
1327: {\tt \rawbackslash \frenchspacing #1}%
1328: \null
1329: }
1330: \let\ttfont=\t
1.2 ! anton 1331: \def\samp#1{`\tclose{#1}'\null}
1.1 anton 1332: \setfont\smallrm\rmshape{8}{1000}
1333: \font\smallsy=cmsy9
1334: \def\key#1{{\smallrm\textfont2=\smallsy \leavevmode\hbox{%
1.2 ! anton 1335: \raise0.4pt\hbox{\angleleft}\kern-.08em\vtop{%
1.1 anton 1336: \vbox{\hrule\kern-0.4pt
1.2 ! anton 1337: \hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}%
1.1 anton 1338: \kern-0.4pt\hrule}%
1.2 ! anton 1339: \kern-.06em\raise0.4pt\hbox{\angleright}}}}
1.1 anton 1340: % The old definition, with no lozenge:
1341: %\def\key #1{{\ttsl \nohyphenation \uppercase{#1}}\null}
1342: \def\ctrl #1{{\tt \rawbackslash \hat}#1}
1343:
1344: \let\file=\samp
1345:
1346: % @code is a modification of @t,
1347: % which makes spaces the same size as normal in the surrounding text.
1348: \def\tclose#1{%
1349: {%
1350: % Change normal interword space to be same as for the current font.
1351: \spaceskip = \fontdimen2\font
1352: %
1353: % Switch to typewriter.
1354: \tt
1355: %
1356: % But `\ ' produces the large typewriter interword space.
1357: \def\ {{\spaceskip = 0pt{} }}%
1358: %
1359: % Turn off hyphenation.
1360: \nohyphenation
1361: %
1362: \rawbackslash
1363: \frenchspacing
1364: #1%
1365: }%
1366: \null
1367: }
1368:
1369: % We *must* turn on hyphenation at `-' and `_' in \code.
1370: % Otherwise, it is too hard to avoid overfull hboxes
1371: % in the Emacs manual, the Library manual, etc.
1372:
1373: % Unfortunately, TeX uses one parameter (\hyphenchar) to control
1374: % both hyphenation at - and hyphenation within words.
1375: % We must therefore turn them both off (\tclose does that)
1376: % and arrange explicitly to hyphenate at a dash.
1377: % -- rms.
1378: {
1379: \catcode`\-=\active
1380: \catcode`\_=\active
1.2 ! anton 1381: \catcode`\|=\active
1.1 anton 1382: \global\def\code{\begingroup \catcode`\-=\active \let-\codedash \catcode`\_=\active \let_\codeunder \codex}
1383: % The following is used by \doprintindex to insure that long function names
1384: % wrap around. It is necessary for - and _ to be active before the index is
1385: % read from the file, as \entry parses the arguments long before \code is
1386: % ever called. -- mycroft
1.2 ! anton 1387: % _ is always active; and it shouldn't be \let = to an _ that is a
! 1388: % subscript character anyway. Then, @cindex @samp{_} (for example)
! 1389: % fails. --karl
! 1390: \global\def\indexbreaks{%
! 1391: \catcode`\-=\active \let-\realdash
! 1392: }
1.1 anton 1393: }
1394:
1395: \def\realdash{-}
1396: \def\codedash{-\discretionary{}{}{}}
1.2 ! anton 1397: \def\codeunder{\ifusingtt{\normalunderscore\discretionary{}{}{}}{\_}}
1.1 anton 1398: \def\codex #1{\tclose{#1}\endgroup}
1399:
1400: %\let\exp=\tclose %Was temporary
1401:
1402: % @kbd is like @code, except that if the argument is just one @key command,
1403: % then @kbd has no effect.
1.2 ! anton 1404:
! 1405: % @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always),
! 1406: % `example' (@kbd uses ttsl only inside of @example and friends),
! 1407: % or `code' (@kbd uses normal tty font always).
! 1408: \def\kbdinputstyle{\parsearg\kbdinputstylexxx}
! 1409: \def\kbdinputstylexxx#1{%
! 1410: \def\arg{#1}%
! 1411: \ifx\arg\worddistinct
! 1412: \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}%
! 1413: \else\ifx\arg\wordexample
! 1414: \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\tt}%
! 1415: \else\ifx\arg\wordcode
! 1416: \gdef\kbdexamplefont{\tt}\gdef\kbdfont{\tt}%
! 1417: \fi\fi\fi
! 1418: }
! 1419: \def\worddistinct{distinct}
! 1420: \def\wordexample{example}
! 1421: \def\wordcode{code}
! 1422:
! 1423: % Default is kbdinputdistinct. (Too much of a hassle to call the macro,
! 1424: % the catcodes are wrong for parsearg to work.)
! 1425: \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}
! 1426:
1.1 anton 1427: \def\xkey{\key}
1428: \def\kbdfoo#1#2#3\par{\def\one{#1}\def\three{#3}\def\threex{??}%
1429: \ifx\one\xkey\ifx\threex\three \key{#2}%
1.2 ! anton 1430: \else{\tclose{\kbdfont\look}}\fi
! 1431: \else{\tclose{\kbdfont\look}}\fi}
! 1432:
! 1433: % @url. Quotes do not seem necessary, so use \code.
! 1434: \let\url=\code
! 1435:
! 1436: % @uref (abbreviation for `urlref') takes an optional second argument
! 1437: % specifying the text to display. First (mandatory) arg is the url.
! 1438: % Perhaps eventually put in a hypertex \special here.
! 1439: %
! 1440: \def\uref#1{\urefxxx #1,,\finish}
! 1441: \def\urefxxx#1,#2,#3\finish{%
! 1442: \setbox0 = \hbox{\ignorespaces #2}%
! 1443: \ifdim\wd0 > 0pt
! 1444: \unhbox0\ (\code{#1})%
! 1445: \else
! 1446: \code{#1}%
! 1447: \fi
! 1448: }
! 1449:
! 1450: % rms does not like the angle brackets --karl, 17may97.
! 1451: % So now @email is just like @uref.
! 1452: %\def\email#1{\angleleft{\tt #1}\angleright}
! 1453: \let\email=\uref
1.1 anton 1454:
1455: % Check if we are currently using a typewriter font. Since all the
1456: % Computer Modern typewriter fonts have zero interword stretch (and
1457: % shrink), and it is reasonable to expect all typewriter fonts to have
1458: % this property, we can check that font parameter.
1.2 ! anton 1459: %
1.1 anton 1460: \def\ifmonospace{\ifdim\fontdimen3\font=0pt }
1461:
1462: % Typeset a dimension, e.g., `in' or `pt'. The only reason for the
1463: % argument is to make the input look right: @dmn{pt} instead of
1464: % @dmn{}pt.
1465: %
1466: \def\dmn#1{\thinspace #1}
1467:
1468: \def\kbd#1{\def\look{#1}\expandafter\kbdfoo\look??\par}
1469:
1470: % @l was never documented to mean ``switch to the Lisp font'',
1471: % and it is not used as such in any manual I can find. We need it for
1472: % Polish suppressed-l. --karl, 22sep96.
1473: %\def\l#1{{\li #1}\null}
1474:
1475: \def\r#1{{\rm #1}} % roman font
1476: % Use of \lowercase was suggested.
1477: \def\sc#1{{\smallcaps#1}} % smallcaps font
1478: \def\ii#1{{\it #1}} % italic font
1479:
1480: % @pounds{} is a sterling sign.
1481: \def\pounds{{\it\$}}
1482:
1483:
1484: \message{page headings,}
1485:
1486: \newskip\titlepagetopglue \titlepagetopglue = 1.5in
1487: \newskip\titlepagebottomglue \titlepagebottomglue = 2pc
1488:
1489: % First the title page. Must do @settitle before @titlepage.
1490: \newif\ifseenauthor
1491: \newif\iffinishedtitlepage
1492:
1493: \def\shorttitlepage{\parsearg\shorttitlepagezzz}
1494: \def\shorttitlepagezzz #1{\begingroup\hbox{}\vskip 1.5in \chaprm \centerline{#1}%
1495: \endgroup\page\hbox{}\page}
1496:
1497: \def\titlepage{\begingroup \parindent=0pt \textfonts
1498: \let\subtitlerm=\tenrm
1499: % I deinstalled the following change because \cmr12 is undefined.
1500: % This change was not in the ChangeLog anyway. --rms.
1501: % \let\subtitlerm=\cmr12
1502: \def\subtitlefont{\subtitlerm \normalbaselineskip = 13pt \normalbaselines}%
1503: %
1504: \def\authorfont{\authorrm \normalbaselineskip = 16pt \normalbaselines}%
1505: %
1506: % Leave some space at the very top of the page.
1507: \vglue\titlepagetopglue
1508: %
1509: % Now you can print the title using @title.
1510: \def\title{\parsearg\titlezzz}%
1.2 ! anton 1511: \def\titlezzz##1{\leftline{\titlefonts\rm ##1}
1.1 anton 1512: % print a rule at the page bottom also.
1513: \finishedtitlepagefalse
1514: \vskip4pt \hrule height 4pt width \hsize \vskip4pt}%
1515: % No rule at page bottom unless we print one at the top with @title.
1516: \finishedtitlepagetrue
1517: %
1518: % Now you can put text using @subtitle.
1519: \def\subtitle{\parsearg\subtitlezzz}%
1520: \def\subtitlezzz##1{{\subtitlefont \rightline{##1}}}%
1521: %
1522: % @author should come last, but may come many times.
1523: \def\author{\parsearg\authorzzz}%
1524: \def\authorzzz##1{\ifseenauthor\else\vskip 0pt plus 1filll\seenauthortrue\fi
1525: {\authorfont \leftline{##1}}}%
1526: %
1527: % Most title ``pages'' are actually two pages long, with space
1528: % at the top of the second. We don't want the ragged left on the second.
1529: \let\oldpage = \page
1530: \def\page{%
1531: \iffinishedtitlepage\else
1532: \finishtitlepage
1533: \fi
1534: \oldpage
1535: \let\page = \oldpage
1536: \hbox{}}%
1537: % \def\page{\oldpage \hbox{}}
1538: }
1539:
1540: \def\Etitlepage{%
1541: \iffinishedtitlepage\else
1542: \finishtitlepage
1543: \fi
1544: % It is important to do the page break before ending the group,
1545: % because the headline and footline are only empty inside the group.
1546: % If we use the new definition of \page, we always get a blank page
1547: % after the title page, which we certainly don't want.
1548: \oldpage
1549: \endgroup
1550: \HEADINGSon
1551: }
1552:
1553: \def\finishtitlepage{%
1554: \vskip4pt \hrule height 2pt width \hsize
1555: \vskip\titlepagebottomglue
1556: \finishedtitlepagetrue
1557: }
1558:
1559: %%% Set up page headings and footings.
1560:
1561: \let\thispage=\folio
1562:
1563: \newtoks \evenheadline % Token sequence for heading line of even pages
1564: \newtoks \oddheadline % Token sequence for heading line of odd pages
1565: \newtoks \evenfootline % Token sequence for footing line of even pages
1566: \newtoks \oddfootline % Token sequence for footing line of odd pages
1567:
1568: % Now make Tex use those variables
1569: \headline={{\textfonts\rm \ifodd\pageno \the\oddheadline
1570: \else \the\evenheadline \fi}}
1571: \footline={{\textfonts\rm \ifodd\pageno \the\oddfootline
1572: \else \the\evenfootline \fi}\HEADINGShook}
1573: \let\HEADINGShook=\relax
1574:
1575: % Commands to set those variables.
1576: % For example, this is what @headings on does
1577: % @evenheading @thistitle|@thispage|@thischapter
1578: % @oddheading @thischapter|@thispage|@thistitle
1579: % @evenfooting @thisfile||
1580: % @oddfooting ||@thisfile
1581:
1582: \def\evenheading{\parsearg\evenheadingxxx}
1583: \def\oddheading{\parsearg\oddheadingxxx}
1584: \def\everyheading{\parsearg\everyheadingxxx}
1585:
1586: \def\evenfooting{\parsearg\evenfootingxxx}
1587: \def\oddfooting{\parsearg\oddfootingxxx}
1588: \def\everyfooting{\parsearg\everyfootingxxx}
1589:
1590: {\catcode`\@=0 %
1591:
1592: \gdef\evenheadingxxx #1{\evenheadingyyy #1@|@|@|@|\finish}
1593: \gdef\evenheadingyyy #1@|#2@|#3@|#4\finish{%
1594: \global\evenheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
1595:
1596: \gdef\oddheadingxxx #1{\oddheadingyyy #1@|@|@|@|\finish}
1597: \gdef\oddheadingyyy #1@|#2@|#3@|#4\finish{%
1598: \global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
1599:
1.2 ! anton 1600: \gdef\everyheadingxxx#1{\oddheadingxxx{#1}\evenheadingxxx{#1}}%
1.1 anton 1601:
1602: \gdef\evenfootingxxx #1{\evenfootingyyy #1@|@|@|@|\finish}
1603: \gdef\evenfootingyyy #1@|#2@|#3@|#4\finish{%
1604: \global\evenfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
1605:
1606: \gdef\oddfootingxxx #1{\oddfootingyyy #1@|@|@|@|\finish}
1607: \gdef\oddfootingyyy #1@|#2@|#3@|#4\finish{%
1.2 ! anton 1608: \global\oddfootline = {\rlap{\centerline{#2}}\line{#1\hfil#3}}%
! 1609: %
! 1610: % Leave some space for the footline. Hopefully ok to assume
! 1611: % @evenfooting will not be used by itself.
! 1612: \global\advance\pageheight by -\baselineskip
! 1613: \global\advance\vsize by -\baselineskip
! 1614: }
1.1 anton 1615:
1.2 ! anton 1616: \gdef\everyfootingxxx#1{\oddfootingxxx{#1}\evenfootingxxx{#1}}
1.1 anton 1617: %
1618: }% unbind the catcode of @.
1619:
1620: % @headings double turns headings on for double-sided printing.
1621: % @headings single turns headings on for single-sided printing.
1622: % @headings off turns them off.
1623: % @headings on same as @headings double, retained for compatibility.
1624: % @headings after turns on double-sided headings after this page.
1625: % @headings doubleafter turns on double-sided headings after this page.
1626: % @headings singleafter turns on single-sided headings after this page.
1627: % By default, they are off at the start of a document,
1628: % and turned `on' after @end titlepage.
1629:
1630: \def\headings #1 {\csname HEADINGS#1\endcsname}
1631:
1632: \def\HEADINGSoff{
1633: \global\evenheadline={\hfil} \global\evenfootline={\hfil}
1634: \global\oddheadline={\hfil} \global\oddfootline={\hfil}}
1635: \HEADINGSoff
1636: % When we turn headings on, set the page number to 1.
1637: % For double-sided printing, put current file name in lower left corner,
1638: % chapter name on inside top of right hand pages, document
1639: % title on inside top of left hand pages, and page numbers on outside top
1640: % edge of all pages.
1641: \def\HEADINGSdouble{
1642: \global\pageno=1
1643: \global\evenfootline={\hfil}
1644: \global\oddfootline={\hfil}
1645: \global\evenheadline={\line{\folio\hfil\thistitle}}
1646: \global\oddheadline={\line{\thischapter\hfil\folio}}
1647: \global\let\contentsalignmacro = \chapoddpage
1648: }
1649: \let\contentsalignmacro = \chappager
1650:
1651: % For single-sided printing, chapter title goes across top left of page,
1652: % page number on top right.
1653: \def\HEADINGSsingle{
1654: \global\pageno=1
1655: \global\evenfootline={\hfil}
1656: \global\oddfootline={\hfil}
1657: \global\evenheadline={\line{\thischapter\hfil\folio}}
1658: \global\oddheadline={\line{\thischapter\hfil\folio}}
1659: \global\let\contentsalignmacro = \chappager
1660: }
1661: \def\HEADINGSon{\HEADINGSdouble}
1662:
1663: \def\HEADINGSafter{\let\HEADINGShook=\HEADINGSdoublex}
1664: \let\HEADINGSdoubleafter=\HEADINGSafter
1665: \def\HEADINGSdoublex{%
1666: \global\evenfootline={\hfil}
1667: \global\oddfootline={\hfil}
1668: \global\evenheadline={\line{\folio\hfil\thistitle}}
1669: \global\oddheadline={\line{\thischapter\hfil\folio}}
1670: \global\let\contentsalignmacro = \chapoddpage
1671: }
1672:
1673: \def\HEADINGSsingleafter{\let\HEADINGShook=\HEADINGSsinglex}
1674: \def\HEADINGSsinglex{%
1675: \global\evenfootline={\hfil}
1676: \global\oddfootline={\hfil}
1677: \global\evenheadline={\line{\thischapter\hfil\folio}}
1678: \global\oddheadline={\line{\thischapter\hfil\folio}}
1679: \global\let\contentsalignmacro = \chappager
1680: }
1681:
1682: % Subroutines used in generating headings
1683: % Produces Day Month Year style of output.
1684: \def\today{\number\day\space
1685: \ifcase\month\or
1686: January\or February\or March\or April\or May\or June\or
1687: July\or August\or September\or October\or November\or December\fi
1688: \space\number\year}
1689:
1690: % Use this if you want the Month Day, Year style of output.
1691: %\def\today{\ifcase\month\or
1692: %January\or February\or March\or April\or May\or June\or
1693: %July\or August\or September\or October\or November\or December\fi
1694: %\space\number\day, \number\year}
1695:
1696: % @settitle line... specifies the title of the document, for headings
1697: % It generates no output of its own
1698:
1699: \def\thistitle{No Title}
1700: \def\settitle{\parsearg\settitlezzz}
1701: \def\settitlezzz #1{\gdef\thistitle{#1}}
1702:
1703:
1704: \message{tables,}
1705:
1706: % @tabs -- simple alignment
1707:
1708: % These don't work. For one thing, \+ is defined as outer.
1709: % So these macros cannot even be defined.
1710:
1711: %\def\tabs{\parsearg\tabszzz}
1712: %\def\tabszzz #1{\settabs\+#1\cr}
1713: %\def\tabline{\parsearg\tablinezzz}
1714: %\def\tablinezzz #1{\+#1\cr}
1715: %\def\&{&}
1716:
1717: % Tables -- @table, @ftable, @vtable, @item(x), @kitem(x), @xitem(x).
1718:
1719: % default indentation of table text
1720: \newdimen\tableindent \tableindent=.8in
1721: % default indentation of @itemize and @enumerate text
1722: \newdimen\itemindent \itemindent=.3in
1723: % margin between end of table item and start of table text.
1724: \newdimen\itemmargin \itemmargin=.1in
1725:
1726: % used internally for \itemindent minus \itemmargin
1727: \newdimen\itemmax
1728:
1729: % Note @table, @vtable, and @vtable define @item, @itemx, etc., with
1730: % these defs.
1731: % They also define \itemindex
1732: % to index the item name in whatever manner is desired (perhaps none).
1733:
1734: \newif\ifitemxneedsnegativevskip
1735:
1736: \def\itemxpar{\par\ifitemxneedsnegativevskip\nobreak\vskip-\parskip\nobreak\fi}
1737:
1738: \def\internalBitem{\smallbreak \parsearg\itemzzz}
1739: \def\internalBitemx{\itemxpar \parsearg\itemzzz}
1740:
1741: \def\internalBxitem "#1"{\def\xitemsubtopix{#1} \smallbreak \parsearg\xitemzzz}
1742: \def\internalBxitemx "#1"{\def\xitemsubtopix{#1} \itemxpar \parsearg\xitemzzz}
1743:
1744: \def\internalBkitem{\smallbreak \parsearg\kitemzzz}
1745: \def\internalBkitemx{\itemxpar \parsearg\kitemzzz}
1746:
1747: \def\kitemzzz #1{\dosubind {kw}{\code{#1}}{for {\bf \lastfunction}}%
1748: \itemzzz {#1}}
1749:
1750: \def\xitemzzz #1{\dosubind {kw}{\code{#1}}{for {\bf \xitemsubtopic}}%
1751: \itemzzz {#1}}
1752:
1753: \def\itemzzz #1{\begingroup %
1754: \advance\hsize by -\rightskip
1755: \advance\hsize by -\tableindent
1756: \setbox0=\hbox{\itemfont{#1}}%
1757: \itemindex{#1}%
1758: \nobreak % This prevents a break before @itemx.
1759: %
1760: % Be sure we are not still in the middle of a paragraph.
1761: %{\parskip = 0in
1762: %\par
1763: %}%
1764: %
1765: % If the item text does not fit in the space we have, put it on a line
1766: % by itself, and do not allow a page break either before or after that
1767: % line. We do not start a paragraph here because then if the next
1768: % command is, e.g., @kindex, the whatsit would get put into the
1769: % horizontal list on a line by itself, resulting in extra blank space.
1770: \ifdim \wd0>\itemmax
1771: %
1772: % Make this a paragraph so we get the \parskip glue and wrapping,
1773: % but leave it ragged-right.
1774: \begingroup
1775: \advance\leftskip by-\tableindent
1776: \advance\hsize by\tableindent
1777: \advance\rightskip by0pt plus1fil
1778: \leavevmode\unhbox0\par
1779: \endgroup
1780: %
1781: % We're going to be starting a paragraph, but we don't want the
1782: % \parskip glue -- logically it's part of the @item we just started.
1783: \nobreak \vskip-\parskip
1784: %
1785: % Stop a page break at the \parskip glue coming up. Unfortunately
1786: % we can't prevent a possible page break at the following
1787: % \baselineskip glue.
1788: \nobreak
1789: \endgroup
1790: \itemxneedsnegativevskipfalse
1791: \else
1792: % The item text fits into the space. Start a paragraph, so that the
1793: % following text (if any) will end up on the same line. Since that
1794: % text will be indented by \tableindent, we make the item text be in
1795: % a zero-width box.
1796: \noindent
1797: \rlap{\hskip -\tableindent\box0}\ignorespaces%
1798: \endgroup%
1799: \itemxneedsnegativevskiptrue%
1800: \fi
1801: }
1802:
1803: \def\item{\errmessage{@item while not in a table}}
1804: \def\itemx{\errmessage{@itemx while not in a table}}
1805: \def\kitem{\errmessage{@kitem while not in a table}}
1806: \def\kitemx{\errmessage{@kitemx while not in a table}}
1807: \def\xitem{\errmessage{@xitem while not in a table}}
1808: \def\xitemx{\errmessage{@xitemx while not in a table}}
1809:
1810: %% Contains a kludge to get @end[description] to work
1811: \def\description{\tablez{\dontindex}{1}{}{}{}{}}
1812:
1813: \def\table{\begingroup\inENV\obeylines\obeyspaces\tablex}
1814: {\obeylines\obeyspaces%
1815: \gdef\tablex #1^^M{%
1816: \tabley\dontindex#1 \endtabley}}
1817:
1818: \def\ftable{\begingroup\inENV\obeylines\obeyspaces\ftablex}
1819: {\obeylines\obeyspaces%
1820: \gdef\ftablex #1^^M{%
1821: \tabley\fnitemindex#1 \endtabley
1822: \def\Eftable{\endgraf\afterenvbreak\endgroup}%
1823: \let\Etable=\relax}}
1824:
1825: \def\vtable{\begingroup\inENV\obeylines\obeyspaces\vtablex}
1826: {\obeylines\obeyspaces%
1827: \gdef\vtablex #1^^M{%
1828: \tabley\vritemindex#1 \endtabley
1829: \def\Evtable{\endgraf\afterenvbreak\endgroup}%
1830: \let\Etable=\relax}}
1831:
1832: \def\dontindex #1{}
1833: \def\fnitemindex #1{\doind {fn}{\code{#1}}}%
1834: \def\vritemindex #1{\doind {vr}{\code{#1}}}%
1835:
1836: {\obeyspaces %
1837: \gdef\tabley#1#2 #3 #4 #5 #6 #7\endtabley{\endgroup%
1838: \tablez{#1}{#2}{#3}{#4}{#5}{#6}}}
1839:
1840: \def\tablez #1#2#3#4#5#6{%
1841: \aboveenvbreak %
1842: \begingroup %
1843: \def\Edescription{\Etable}% Necessary kludge.
1844: \let\itemindex=#1%
1845: \ifnum 0#3>0 \advance \leftskip by #3\mil \fi %
1846: \ifnum 0#4>0 \tableindent=#4\mil \fi %
1847: \ifnum 0#5>0 \advance \rightskip by #5\mil \fi %
1848: \def\itemfont{#2}%
1849: \itemmax=\tableindent %
1850: \advance \itemmax by -\itemmargin %
1851: \advance \leftskip by \tableindent %
1852: \exdentamount=\tableindent
1853: \parindent = 0pt
1854: \parskip = \smallskipamount
1855: \ifdim \parskip=0pt \parskip=2pt \fi%
1856: \def\Etable{\endgraf\afterenvbreak\endgroup}%
1857: \let\item = \internalBitem %
1858: \let\itemx = \internalBitemx %
1859: \let\kitem = \internalBkitem %
1860: \let\kitemx = \internalBkitemx %
1861: \let\xitem = \internalBxitem %
1862: \let\xitemx = \internalBxitemx %
1863: }
1864:
1865: % This is the counter used by @enumerate, which is really @itemize
1866:
1867: \newcount \itemno
1868:
1869: \def\itemize{\parsearg\itemizezzz}
1870:
1871: \def\itemizezzz #1{%
1872: \begingroup % ended by the @end itemsize
1873: \itemizey {#1}{\Eitemize}
1874: }
1875:
1876: \def\itemizey #1#2{%
1877: \aboveenvbreak %
1878: \itemmax=\itemindent %
1879: \advance \itemmax by -\itemmargin %
1880: \advance \leftskip by \itemindent %
1881: \exdentamount=\itemindent
1882: \parindent = 0pt %
1883: \parskip = \smallskipamount %
1884: \ifdim \parskip=0pt \parskip=2pt \fi%
1885: \def#2{\endgraf\afterenvbreak\endgroup}%
1886: \def\itemcontents{#1}%
1887: \let\item=\itemizeitem}
1888:
1889: % Set sfcode to normal for the chars that usually have another value.
1890: % These are `.?!:;,'
1891: \def\frenchspacing{\sfcode46=1000 \sfcode63=1000 \sfcode33=1000
1892: \sfcode58=1000 \sfcode59=1000 \sfcode44=1000 }
1893:
1894: % \splitoff TOKENS\endmark defines \first to be the first token in
1895: % TOKENS, and \rest to be the remainder.
1896: %
1897: \def\splitoff#1#2\endmark{\def\first{#1}\def\rest{#2}}%
1898:
1899: % Allow an optional argument of an uppercase letter, lowercase letter,
1900: % or number, to specify the first label in the enumerated list. No
1901: % argument is the same as `1'.
1902: %
1903: \def\enumerate{\parsearg\enumeratezzz}
1904: \def\enumeratezzz #1{\enumeratey #1 \endenumeratey}
1905: \def\enumeratey #1 #2\endenumeratey{%
1906: \begingroup % ended by the @end enumerate
1907: %
1908: % If we were given no argument, pretend we were given `1'.
1909: \def\thearg{#1}%
1910: \ifx\thearg\empty \def\thearg{1}\fi
1911: %
1912: % Detect if the argument is a single token. If so, it might be a
1913: % letter. Otherwise, the only valid thing it can be is a number.
1914: % (We will always have one token, because of the test we just made.
1915: % This is a good thing, since \splitoff doesn't work given nothing at
1916: % all -- the first parameter is undelimited.)
1917: \expandafter\splitoff\thearg\endmark
1918: \ifx\rest\empty
1919: % Only one token in the argument. It could still be anything.
1920: % A ``lowercase letter'' is one whose \lccode is nonzero.
1921: % An ``uppercase letter'' is one whose \lccode is both nonzero, and
1922: % not equal to itself.
1923: % Otherwise, we assume it's a number.
1924: %
1925: % We need the \relax at the end of the \ifnum lines to stop TeX from
1926: % continuing to look for a <number>.
1927: %
1928: \ifnum\lccode\expandafter`\thearg=0\relax
1929: \numericenumerate % a number (we hope)
1930: \else
1931: % It's a letter.
1932: \ifnum\lccode\expandafter`\thearg=\expandafter`\thearg\relax
1933: \lowercaseenumerate % lowercase letter
1934: \else
1935: \uppercaseenumerate % uppercase letter
1936: \fi
1937: \fi
1938: \else
1939: % Multiple tokens in the argument. We hope it's a number.
1940: \numericenumerate
1941: \fi
1942: }
1943:
1944: % An @enumerate whose labels are integers. The starting integer is
1945: % given in \thearg.
1946: %
1947: \def\numericenumerate{%
1948: \itemno = \thearg
1949: \startenumeration{\the\itemno}%
1950: }
1951:
1952: % The starting (lowercase) letter is in \thearg.
1953: \def\lowercaseenumerate{%
1954: \itemno = \expandafter`\thearg
1955: \startenumeration{%
1956: % Be sure we're not beyond the end of the alphabet.
1957: \ifnum\itemno=0
1958: \errmessage{No more lowercase letters in @enumerate; get a bigger
1959: alphabet}%
1960: \fi
1961: \char\lccode\itemno
1962: }%
1963: }
1964:
1965: % The starting (uppercase) letter is in \thearg.
1966: \def\uppercaseenumerate{%
1967: \itemno = \expandafter`\thearg
1968: \startenumeration{%
1969: % Be sure we're not beyond the end of the alphabet.
1970: \ifnum\itemno=0
1971: \errmessage{No more uppercase letters in @enumerate; get a bigger
1972: alphabet}
1973: \fi
1974: \char\uccode\itemno
1975: }%
1976: }
1977:
1978: % Call itemizey, adding a period to the first argument and supplying the
1979: % common last two arguments. Also subtract one from the initial value in
1980: % \itemno, since @item increments \itemno.
1981: %
1982: \def\startenumeration#1{%
1983: \advance\itemno by -1
1984: \itemizey{#1.}\Eenumerate\flushcr
1985: }
1986:
1987: % @alphaenumerate and @capsenumerate are abbreviations for giving an arg
1988: % to @enumerate.
1989: %
1990: \def\alphaenumerate{\enumerate{a}}
1991: \def\capsenumerate{\enumerate{A}}
1992: \def\Ealphaenumerate{\Eenumerate}
1993: \def\Ecapsenumerate{\Eenumerate}
1994:
1995: % Definition of @item while inside @itemize.
1996:
1997: \def\itemizeitem{%
1998: \advance\itemno by 1
1999: {\let\par=\endgraf \smallbreak}%
1.2 ! anton 2000: \ifhmode \errmessage{In hmode at itemizeitem}\fi
1.1 anton 2001: {\parskip=0in \hskip 0pt
2002: \hbox to 0pt{\hss \itemcontents\hskip \itemmargin}%
2003: \vadjust{\penalty 1200}}%
2004: \flushcr}
2005:
2006: % @multitable macros
2007: % Amy Hendrickson, 8/18/94, 3/6/96
2008: %
2009: % @multitable ... @end multitable will make as many columns as desired.
2010: % Contents of each column will wrap at width given in preamble. Width
2011: % can be specified either with sample text given in a template line,
2012: % or in percent of \hsize, the current width of text on page.
2013:
2014: % Table can continue over pages but will only break between lines.
2015:
2016: % To make preamble:
2017: %
1.2 ! anton 2018: % Either define widths of columns in terms of percent of \hsize:
1.1 anton 2019: % @multitable @columnfractions .25 .3 .45
2020: % @item ...
2021: %
2022: % Numbers following @columnfractions are the percent of the total
2023: % current hsize to be used for each column. You may use as many
2024: % columns as desired.
2025:
2026:
2027: % Or use a template:
2028: % @multitable {Column 1 template} {Column 2 template} {Column 3 template}
2029: % @item ...
2030: % using the widest term desired in each column.
2031: %
2032: % For those who want to use more than one line's worth of words in
2033: % the preamble, break the line within one argument and it
2034: % will parse correctly, i.e.,
2035: %
1.2 ! anton 2036: % @multitable {Column 1 template} {Column 2 template} {Column 3
1.1 anton 2037: % template}
2038: % Not:
1.2 ! anton 2039: % @multitable {Column 1 template} {Column 2 template}
1.1 anton 2040: % {Column 3 template}
2041:
1.2 ! anton 2042: % Each new table line starts with @item, each subsequent new column
1.1 anton 2043: % starts with @tab. Empty columns may be produced by supplying @tab's
2044: % with nothing between them for as many times as empty columns are needed,
2045: % ie, @tab@tab@tab will produce two empty columns.
2046:
2047: % @item, @tab, @multitable or @end multitable do not need to be on their
2048: % own lines, but it will not hurt if they are.
2049:
2050: % Sample multitable:
2051:
2052: % @multitable {Column 1 template} {Column 2 template} {Column 3 template}
2053: % @item first col stuff @tab second col stuff @tab third col
1.2 ! anton 2054: % @item
! 2055: % first col stuff
! 2056: % @tab
! 2057: % second col stuff
! 2058: % @tab
! 2059: % third col
! 2060: % @item first col stuff @tab second col stuff
1.1 anton 2061: % @tab Many paragraphs of text may be used in any column.
1.2 ! anton 2062: %
1.1 anton 2063: % They will wrap at the width determined by the template.
2064: % @item@tab@tab This will be in third column.
2065: % @end multitable
2066:
2067: % Default dimensions may be reset by user.
2068: % @multitableparskip is vertical space between paragraphs in table.
2069: % @multitableparindent is paragraph indent in table.
2070: % @multitablecolmargin is horizontal space to be left between columns.
2071: % @multitablelinespace is space to leave between table items, baseline
2072: % to baseline.
2073: % 0pt means it depends on current normal line spacing.
1.2 ! anton 2074: %
1.1 anton 2075: \newskip\multitableparskip
2076: \newskip\multitableparindent
2077: \newdimen\multitablecolspace
2078: \newskip\multitablelinespace
2079: \multitableparskip=0pt
2080: \multitableparindent=6pt
2081: \multitablecolspace=12pt
2082: \multitablelinespace=0pt
2083:
2084: % Macros used to set up halign preamble:
1.2 ! anton 2085: %
1.1 anton 2086: \let\endsetuptable\relax
2087: \def\xendsetuptable{\endsetuptable}
2088: \let\columnfractions\relax
2089: \def\xcolumnfractions{\columnfractions}
2090: \newif\ifsetpercent
2091:
1.2 ! anton 2092: % 2/1/96, to allow fractions to be given with more than one digit.
1.1 anton 2093: \def\pickupwholefraction#1 {\global\advance\colcount by1 %
2094: \expandafter\xdef\csname col\the\colcount\endcsname{.#1\hsize}%
2095: \setuptable}
2096:
2097: \newcount\colcount
2098: \def\setuptable#1{\def\firstarg{#1}%
2099: \ifx\firstarg\xendsetuptable\let\go\relax%
2100: \else
2101: \ifx\firstarg\xcolumnfractions\global\setpercenttrue%
2102: \else
2103: \ifsetpercent
2104: \let\go\pickupwholefraction % In this case arg of setuptable
2105: % is the decimal point before the
2106: % number given in percent of hsize.
2107: % We don't need this so we don't use it.
2108: \else
2109: \global\advance\colcount by1
2110: \setbox0=\hbox{#1 }% Add a normal word space as a separator;
2111: % typically that is always in the input, anyway.
2112: \expandafter\xdef\csname col\the\colcount\endcsname{\the\wd0}%
2113: \fi%
2114: \fi%
2115: \ifx\go\pickupwholefraction\else\let\go\setuptable\fi%
2116: \fi\go}
2117:
2118: % multitable syntax
2119: \def\tab{&\hskip1sp\relax} % 2/2/96
2120: % tiny skip here makes sure this column space is
2121: % maintained, even if it is never used.
2122:
2123: % @multitable ... @end multitable definitions:
2124:
2125: \def\multitable{\parsearg\dotable}
2126: \def\dotable#1{\bgroup
1.2 ! anton 2127: \vskip\parskip
! 2128: \let\item\crcr
! 2129: \tolerance=9500
! 2130: \hbadness=9500
! 2131: \setmultitablespacing
! 2132: \parskip=\multitableparskip
! 2133: \parindent=\multitableparindent
! 2134: \overfullrule=0pt
! 2135: \global\colcount=0
! 2136: \def\Emultitable{\global\setpercentfalse\cr\egroup\egroup}%
! 2137: %
! 2138: % To parse everything between @multitable and @item:
! 2139: \setuptable#1 \endsetuptable
! 2140: %
! 2141: % \everycr will reset column counter, \colcount, at the end of
! 2142: % each line. Every column entry will cause \colcount to advance by one.
! 2143: % The table preamble
! 2144: % looks at the current \colcount to find the correct column width.
! 2145: \everycr{\noalign{%
! 2146: %
! 2147: % \filbreak%% keeps underfull box messages off when table breaks over pages.
! 2148: % Maybe so, but it also creates really weird page breaks when the table
! 2149: % breaks over pages. Wouldn't \vfil be better? Wait until the problem
! 2150: % manifests itself, so it can be fixed for real --karl.
! 2151: \global\colcount=0\relax}}%
! 2152: %
! 2153: % This preamble sets up a generic column definition, which will
! 2154: % be used as many times as user calls for columns.
! 2155: % \vtop will set a single line and will also let text wrap and
! 2156: % continue for many paragraphs if desired.
! 2157: \halign\bgroup&\global\advance\colcount by 1\relax
! 2158: \multistrut\vtop{\hsize=\expandafter\csname col\the\colcount\endcsname
! 2159: %
! 2160: % In order to keep entries from bumping into each other
! 2161: % we will add a \leftskip of \multitablecolspace to all columns after
! 2162: % the first one.
! 2163: %
! 2164: % If a template has been used, we will add \multitablecolspace
! 2165: % to the width of each template entry.
! 2166: %
! 2167: % If the user has set preamble in terms of percent of \hsize we will
! 2168: % use that dimension as the width of the column, and the \leftskip
! 2169: % will keep entries from bumping into each other. Table will start at
! 2170: % left margin and final column will justify at right margin.
! 2171: %
! 2172: % Make sure we don't inherit \rightskip from the outer environment.
! 2173: \rightskip=0pt
! 2174: \ifnum\colcount=1
! 2175: % The first column will be indented with the surrounding text.
! 2176: \advance\hsize by\leftskip
1.1 anton 2177: \else
1.2 ! anton 2178: \ifsetpercent \else
! 2179: % If user has not set preamble in terms of percent of \hsize
! 2180: % we will advance \hsize by \multitablecolspace.
! 2181: \advance\hsize by \multitablecolspace
! 2182: \fi
! 2183: % In either case we will make \leftskip=\multitablecolspace:
! 2184: \leftskip=\multitablecolspace
1.1 anton 2185: \fi
1.2 ! anton 2186: % Ignoring space at the beginning and end avoids an occasional spurious
! 2187: % blank line, when TeX decides to break the line at the space before the
! 2188: % box from the multistrut, so the strut ends up on a line by itself.
! 2189: % For example:
! 2190: % @multitable @columnfractions .11 .89
! 2191: % @item @code{#}
! 2192: % @tab Legal holiday which is valid in major parts of the whole country.
! 2193: % Is automatically provided with highlighting sequences respectively marking
! 2194: % characters.
! 2195: \noindent\ignorespaces##\unskip\multistrut}\cr
1.1 anton 2196: }
2197:
2198: \def\setmultitablespacing{% test to see if user has set \multitablelinespace.
2199: % If so, do nothing. If not, give it an appropriate dimension based on
2200: % current baselineskip.
2201: \ifdim\multitablelinespace=0pt
2202: %% strut to put in table in case some entry doesn't have descenders,
2203: %% to keep lines equally spaced
2204: \let\multistrut = \strut
2205: %% Test to see if parskip is larger than space between lines of
1.2 ! anton 2206: %% table. If not, do nothing.
1.1 anton 2207: %% If so, set to same dimension as multitablelinespace.
2208: \else
2209: \gdef\multistrut{\vrule height\multitablelinespace depth\dp0
2210: width0pt\relax} \fi
2211: \ifdim\multitableparskip>\multitablelinespace
2212: \global\multitableparskip=\multitablelinespace
2213: \global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller
2214: %% than skip between lines in the table.
2215: \fi%
2216: \ifdim\multitableparskip=0pt
2217: \global\multitableparskip=\multitablelinespace
2218: \global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller
2219: %% than skip between lines in the table.
2220: \fi}
2221:
2222:
2223: \message{indexing,}
2224: % Index generation facilities
2225:
2226: % Define \newwrite to be identical to plain tex's \newwrite
2227: % except not \outer, so it can be used within \newindex.
2228: {\catcode`\@=11
2229: \gdef\newwrite{\alloc@7\write\chardef\sixt@@n}}
2230:
2231: % \newindex {foo} defines an index named foo.
2232: % It automatically defines \fooindex such that
2233: % \fooindex ...rest of line... puts an entry in the index foo.
2234: % It also defines \fooindfile to be the number of the output channel for
2235: % the file that accumulates this index. The file's extension is foo.
2236: % The name of an index should be no more than 2 characters long
2237: % for the sake of vms.
2238:
2239: \def\newindex #1{
2240: \expandafter\newwrite \csname#1indfile\endcsname% Define number for output file
2241: \openout \csname#1indfile\endcsname \jobname.#1 % Open the file
2242: \expandafter\xdef\csname#1index\endcsname{% % Define \xxxindex
2243: \noexpand\doindex {#1}}
2244: }
2245:
2246: % @defindex foo == \newindex{foo}
2247:
2248: \def\defindex{\parsearg\newindex}
2249:
2250: % Define @defcodeindex, like @defindex except put all entries in @code.
2251:
2252: \def\newcodeindex #1{
2253: \expandafter\newwrite \csname#1indfile\endcsname% Define number for output file
2254: \openout \csname#1indfile\endcsname \jobname.#1 % Open the file
2255: \expandafter\xdef\csname#1index\endcsname{% % Define \xxxindex
2256: \noexpand\docodeindex {#1}}
2257: }
2258:
2259: \def\defcodeindex{\parsearg\newcodeindex}
2260:
2261: % @synindex foo bar makes index foo feed into index bar.
2262: % Do this instead of @defindex foo if you don't want it as a separate index.
2263: \def\synindex #1 #2 {%
2264: \expandafter\let\expandafter\synindexfoo\expandafter=\csname#2indfile\endcsname
2265: \expandafter\let\csname#1indfile\endcsname=\synindexfoo
2266: \expandafter\xdef\csname#1index\endcsname{% % Define \xxxindex
2267: \noexpand\doindex {#2}}%
2268: }
2269:
2270: % @syncodeindex foo bar similar, but put all entries made for index foo
2271: % inside @code.
2272: \def\syncodeindex #1 #2 {%
2273: \expandafter\let\expandafter\synindexfoo\expandafter=\csname#2indfile\endcsname
2274: \expandafter\let\csname#1indfile\endcsname=\synindexfoo
2275: \expandafter\xdef\csname#1index\endcsname{% % Define \xxxindex
2276: \noexpand\docodeindex {#2}}%
2277: }
2278:
2279: % Define \doindex, the driver for all \fooindex macros.
2280: % Argument #1 is generated by the calling \fooindex macro,
2281: % and it is "foo", the name of the index.
2282:
2283: % \doindex just uses \parsearg; it calls \doind for the actual work.
2284: % This is because \doind is more useful to call from other macros.
2285:
2286: % There is also \dosubind {index}{topic}{subtopic}
2287: % which makes an entry in a two-level index such as the operation index.
2288:
2289: \def\doindex#1{\edef\indexname{#1}\parsearg\singleindexer}
2290: \def\singleindexer #1{\doind{\indexname}{#1}}
2291:
2292: % like the previous two, but they put @code around the argument.
2293: \def\docodeindex#1{\edef\indexname{#1}\parsearg\singlecodeindexer}
2294: \def\singlecodeindexer #1{\doind{\indexname}{\code{#1}}}
2295:
2296: \def\indexdummies{%
2297: % Take care of the plain tex accent commands.
2298: \def\"{\realbackslash "}%
2299: \def\`{\realbackslash `}%
2300: \def\'{\realbackslash '}%
2301: \def\^{\realbackslash ^}%
2302: \def\~{\realbackslash ~}%
2303: \def\={\realbackslash =}%
2304: \def\b{\realbackslash b}%
2305: \def\c{\realbackslash c}%
2306: \def\d{\realbackslash d}%
2307: \def\u{\realbackslash u}%
2308: \def\v{\realbackslash v}%
2309: \def\H{\realbackslash H}%
2310: % Take care of the plain tex special European modified letters.
2311: \def\oe{\realbackslash oe}%
2312: \def\ae{\realbackslash ae}%
2313: \def\aa{\realbackslash aa}%
2314: \def\OE{\realbackslash OE}%
2315: \def\AE{\realbackslash AE}%
2316: \def\AA{\realbackslash AA}%
2317: \def\o{\realbackslash o}%
2318: \def\O{\realbackslash O}%
2319: \def\l{\realbackslash l}%
2320: \def\L{\realbackslash L}%
2321: \def\ss{\realbackslash ss}%
2322: % Take care of texinfo commands likely to appear in an index entry.
2323: % (Must be a way to avoid doing expansion at all, and thus not have to
2324: % laboriously list every single command here.)
2325: \def\@{@}% will be @@ when we switch to @ as escape char.
2326: %\let\{ = \lbracecmd
2327: %\let\} = \rbracecmd
2328: \def\_{{\realbackslash _}}%
2329: \def\w{\realbackslash w }%
2330: \def\bf{\realbackslash bf }%
2331: %\def\rm{\realbackslash rm }%
2332: \def\sl{\realbackslash sl }%
2333: \def\sf{\realbackslash sf}%
2334: \def\tt{\realbackslash tt}%
2335: \def\gtr{\realbackslash gtr}%
2336: \def\less{\realbackslash less}%
2337: \def\hat{\realbackslash hat}%
2338: %\def\char{\realbackslash char}%
2339: \def\TeX{\realbackslash TeX}%
2340: \def\dots{\realbackslash dots }%
1.2 ! anton 2341: \def\result{\realbackslash result}%
! 2342: \def\equiv{\realbackslash equiv}%
! 2343: \def\expansion{\realbackslash expansion}%
! 2344: \def\print{\realbackslash print}%
! 2345: \def\error{\realbackslash error}%
! 2346: \def\point{\realbackslash point}%
! 2347: \def\copyright{\realbackslash copyright}%
1.1 anton 2348: \def\tclose##1{\realbackslash tclose {##1}}%
2349: \def\code##1{\realbackslash code {##1}}%
2350: \def\dotless##1{\realbackslash dotless {##1}}%
2351: \def\samp##1{\realbackslash samp {##1}}%
2352: \def\,##1{\realbackslash ,{##1}}%
2353: \def\t##1{\realbackslash t {##1}}%
2354: \def\r##1{\realbackslash r {##1}}%
2355: \def\i##1{\realbackslash i {##1}}%
2356: \def\b##1{\realbackslash b {##1}}%
1.2 ! anton 2357: \def\sc##1{\realbackslash sc {##1}}%
1.1 anton 2358: \def\cite##1{\realbackslash cite {##1}}%
2359: \def\key##1{\realbackslash key {##1}}%
2360: \def\file##1{\realbackslash file {##1}}%
2361: \def\var##1{\realbackslash var {##1}}%
2362: \def\kbd##1{\realbackslash kbd {##1}}%
2363: \def\dfn##1{\realbackslash dfn {##1}}%
2364: \def\emph##1{\realbackslash emph {##1}}%
1.2 ! anton 2365: \def\value##1{\realbackslash value {##1}}%
1.1 anton 2366: \unsepspaces
2367: }
2368:
2369: % If an index command is used in an @example environment, any spaces
2370: % therein should become regular spaces in the raw index file, not the
2371: % expansion of \tie (\\leavevmode \penalty \@M \ ).
2372: {\obeyspaces
2373: \gdef\unsepspaces{\obeyspaces\let =\space}}
2374:
2375: % \indexnofonts no-ops all font-change commands.
2376: % This is used when outputting the strings to sort the index by.
2377: \def\indexdummyfont#1{#1}
2378: \def\indexdummytex{TeX}
2379: \def\indexdummydots{...}
2380:
2381: \def\indexnofonts{%
2382: % Just ignore accents.
2383: \let\,=\indexdummyfont
2384: \let\"=\indexdummyfont
2385: \let\`=\indexdummyfont
2386: \let\'=\indexdummyfont
2387: \let\^=\indexdummyfont
2388: \let\~=\indexdummyfont
2389: \let\==\indexdummyfont
2390: \let\b=\indexdummyfont
2391: \let\c=\indexdummyfont
2392: \let\d=\indexdummyfont
2393: \let\u=\indexdummyfont
2394: \let\v=\indexdummyfont
2395: \let\H=\indexdummyfont
2396: \let\dotless=\indexdummyfont
2397: % Take care of the plain tex special European modified letters.
2398: \def\oe{oe}%
2399: \def\ae{ae}%
2400: \def\aa{aa}%
2401: \def\OE{OE}%
2402: \def\AE{AE}%
2403: \def\AA{AA}%
2404: \def\o{o}%
2405: \def\O{O}%
2406: \def\l{l}%
2407: \def\L{L}%
2408: \def\ss{ss}%
2409: \let\w=\indexdummyfont
2410: \let\t=\indexdummyfont
2411: \let\r=\indexdummyfont
2412: \let\i=\indexdummyfont
2413: \let\b=\indexdummyfont
2414: \let\emph=\indexdummyfont
2415: \let\strong=\indexdummyfont
2416: \let\cite=\indexdummyfont
2417: \let\sc=\indexdummyfont
2418: %Don't no-op \tt, since it isn't a user-level command
2419: % and is used in the definitions of the active chars like <, >, |...
2420: %\let\tt=\indexdummyfont
2421: \let\tclose=\indexdummyfont
2422: \let\code=\indexdummyfont
2423: \let\file=\indexdummyfont
2424: \let\samp=\indexdummyfont
2425: \let\kbd=\indexdummyfont
2426: \let\key=\indexdummyfont
2427: \let\var=\indexdummyfont
2428: \let\TeX=\indexdummytex
2429: \let\dots=\indexdummydots
2430: \def\@{@}%
2431: }
2432:
2433: % To define \realbackslash, we must make \ not be an escape.
2434: % We must first make another character (@) an escape
2435: % so we do not become unable to do a definition.
2436:
2437: {\catcode`\@=0 \catcode`\\=\other
2438: @gdef@realbackslash{\}}
2439:
2440: \let\indexbackslash=0 %overridden during \printindex.
2441:
2442: \let\SETmarginindex=\relax %initialize!
2443: % workhorse for all \fooindexes
2444: % #1 is name of index, #2 is stuff to put there
2445: \def\doind #1#2{%
2446: % Put the index entry in the margin if desired.
2447: \ifx\SETmarginindex\relax\else
2448: \insert\margin{\hbox{\vrule height8pt depth3pt width0pt #2}}%
2449: \fi
2450: {%
2451: \count255=\lastpenalty
2452: {%
2453: \indexdummies % Must do this here, since \bf, etc expand at this stage
2454: \escapechar=`\\
2455: {%
1.2 ! anton 2456: \let\folio=0% We will expand all macros now EXCEPT \folio.
1.1 anton 2457: \def\rawbackslashxx{\indexbackslash}% \indexbackslash isn't defined now
2458: % so it will be output as is; and it will print as backslash.
2459: %
2460: % First process the index-string with all font commands turned off
2461: % to get the string to sort by.
2462: {\indexnofonts \xdef\indexsorttmp{#2}}%
2463: %
2464: % Now produce the complete index entry, with both the sort key and the
2465: % original text, including any font commands.
2466: \toks0 = {#2}%
2467: \edef\temp{%
2468: \write\csname#1indfile\endcsname{%
2469: \realbackslash entry{\indexsorttmp}{\folio}{\the\toks0}}%
2470: }%
2471: \temp
2472: }%
2473: }%
2474: \penalty\count255
2475: }%
2476: }
2477:
2478: \def\dosubind #1#2#3{%
2479: {\count10=\lastpenalty %
2480: {\indexdummies % Must do this here, since \bf, etc expand at this stage
2481: \escapechar=`\\%
2482: {\let\folio=0%
2483: \def\rawbackslashxx{\indexbackslash}%
2484: %
2485: % Now process the index-string once, with all font commands turned off,
2486: % to get the string to sort the index by.
2487: {\indexnofonts
2488: \xdef\temp1{#2 #3}%
2489: }%
2490: % Now produce the complete index entry. We process the index-string again,
2491: % this time with font commands expanded, to get what to print in the index.
2492: \edef\temp{%
2493: \write \csname#1indfile\endcsname{%
2494: \realbackslash entry {\temp1}{\folio}{#2}{#3}}}%
2495: \temp }%
2496: }\penalty\count10}}
2497:
2498: % The index entry written in the file actually looks like
2499: % \entry {sortstring}{page}{topic}
2500: % or
2501: % \entry {sortstring}{page}{topic}{subtopic}
2502: % The texindex program reads in these files and writes files
2503: % containing these kinds of lines:
2504: % \initial {c}
2505: % before the first topic whose initial is c
2506: % \entry {topic}{pagelist}
2507: % for a topic that is used without subtopics
2508: % \primary {topic}
2509: % for the beginning of a topic that is used with subtopics
2510: % \secondary {subtopic}{pagelist}
2511: % for each subtopic.
2512:
2513: % Define the user-accessible indexing commands
2514: % @findex, @vindex, @kindex, @cindex.
2515:
2516: \def\findex {\fnindex}
2517: \def\kindex {\kyindex}
2518: \def\cindex {\cpindex}
2519: \def\vindex {\vrindex}
2520: \def\tindex {\tpindex}
2521: \def\pindex {\pgindex}
2522:
2523: \def\cindexsub {\begingroup\obeylines\cindexsub}
2524: {\obeylines %
2525: \gdef\cindexsub "#1" #2^^M{\endgroup %
2526: \dosubind{cp}{#2}{#1}}}
2527:
2528: % Define the macros used in formatting output of the sorted index material.
2529:
1.2 ! anton 2530: % @printindex causes a particular index (the ??s file) to get printed.
! 2531: % It does not print any chapter heading (usually an @unnumbered).
! 2532: %
1.1 anton 2533: \def\printindex{\parsearg\doprintindex}
2534: \def\doprintindex#1{\begingroup
2535: \dobreak \chapheadingskip{10000}%
2536: %
2537: \indexfonts \rm
2538: \tolerance = 9500
2539: \indexbreaks
2540: %
2541: % See if the index file exists and is nonempty.
1.2 ! anton 2542: % Change catcode of @ here so that if the index file contains
! 2543: % \initial {@}
! 2544: % as its first line, TeX doesn't complain about mismatched braces
! 2545: % (because it thinks @} is a control sequence).
! 2546: \catcode`\@ = 11
1.1 anton 2547: \openin 1 \jobname.#1s
2548: \ifeof 1
2549: % \enddoublecolumns gets confused if there is no text in the index,
2550: % and it loses the chapter title and the aux file entries for the
2551: % index. The easiest way to prevent this problem is to make sure
2552: % there is some text.
2553: (Index is nonexistent)
2554: \else
2555: %
2556: % If the index file exists but is empty, then \openin leaves \ifeof
2557: % false. We have to make TeX try to read something from the file, so
2558: % it can discover if there is anything in it.
2559: \read 1 to \temp
2560: \ifeof 1
2561: (Index is empty)
2562: \else
1.2 ! anton 2563: % Index files are almost Texinfo source, but we use \ as the escape
! 2564: % character. It would be better to use @, but that's too big a change
! 2565: % to make right now.
! 2566: \def\indexbackslash{\rawbackslashxx}%
! 2567: \catcode`\\ = 0
! 2568: \escapechar = `\\
! 2569: \begindoublecolumns
1.1 anton 2570: \input \jobname.#1s
1.2 ! anton 2571: \enddoublecolumns
1.1 anton 2572: \fi
2573: \fi
2574: \closein 1
2575: \endgroup}
2576:
2577: % These macros are used by the sorted index file itself.
2578: % Change them to control the appearance of the index.
2579:
2580: % Same as \bigskipamount except no shrink.
2581: % \balancecolumns gets confused if there is any shrink.
2582: \newskip\initialskipamount \initialskipamount 12pt plus4pt
2583:
2584: \def\initial #1{%
2585: {\let\tentt=\sectt \let\tt=\sectt \let\sf=\sectt
2586: \ifdim\lastskip<\initialskipamount
2587: \removelastskip \penalty-200 \vskip \initialskipamount\fi
2588: \line{\secbf#1\hfill}\kern 2pt\penalty10000}}
2589:
2590: % This typesets a paragraph consisting of #1, dot leaders, and then #2
2591: % flush to the right margin. It is used for index and table of contents
2592: % entries. The paragraph is indented by \leftskip.
2593: %
2594: \def\entry #1#2{\begingroup
2595: %
2596: % Start a new paragraph if necessary, so our assignments below can't
2597: % affect previous text.
2598: \par
2599: %
2600: % Do not fill out the last line with white space.
2601: \parfillskip = 0in
2602: %
2603: % No extra space above this paragraph.
2604: \parskip = 0in
2605: %
2606: % Do not prefer a separate line ending with a hyphen to fewer lines.
2607: \finalhyphendemerits = 0
2608: %
2609: % \hangindent is only relevant when the entry text and page number
2610: % don't both fit on one line. In that case, bob suggests starting the
2611: % dots pretty far over on the line. Unfortunately, a large
2612: % indentation looks wrong when the entry text itself is broken across
2613: % lines. So we use a small indentation and put up with long leaders.
2614: %
2615: % \hangafter is reset to 1 (which is the value we want) at the start
2616: % of each paragraph, so we need not do anything with that.
2617: \hangindent=2em
2618: %
2619: % When the entry text needs to be broken, just fill out the first line
2620: % with blank space.
2621: \rightskip = 0pt plus1fil
2622: %
2623: % Start a ``paragraph'' for the index entry so the line breaking
2624: % parameters we've set above will have an effect.
2625: \noindent
2626: %
2627: % Insert the text of the index entry. TeX will do line-breaking on it.
2628: #1%
2629: % The following is kludged to not output a line of dots in the index if
2630: % there are no page numbers. The next person who breaks this will be
2631: % cursed by a Unix daemon.
2632: \def\tempa{{\rm }}%
2633: \def\tempb{#2}%
2634: \edef\tempc{\tempa}%
2635: \edef\tempd{\tempb}%
2636: \ifx\tempc\tempd\ \else%
2637: %
2638: % If we must, put the page number on a line of its own, and fill out
2639: % this line with blank space. (The \hfil is overwhelmed with the
2640: % fill leaders glue in \indexdotfill if the page number does fit.)
2641: \hfil\penalty50
2642: \null\nobreak\indexdotfill % Have leaders before the page number.
2643: %
2644: % The `\ ' here is removed by the implicit \unskip that TeX does as
2645: % part of (the primitive) \par. Without it, a spurious underfull
2646: % \hbox ensues.
2647: \ #2% The page number ends the paragraph.
2648: \fi%
2649: \par
2650: \endgroup}
2651:
2652: % Like \dotfill except takes at least 1 em.
2653: \def\indexdotfill{\cleaders
2654: \hbox{$\mathsurround=0pt \mkern1.5mu ${\it .}$ \mkern1.5mu$}\hskip 1em plus 1fill}
2655:
2656: \def\primary #1{\line{#1\hfil}}
2657:
2658: \newskip\secondaryindent \secondaryindent=0.5cm
2659:
2660: \def\secondary #1#2{
2661: {\parfillskip=0in \parskip=0in
2662: \hangindent =1in \hangafter=1
2663: \noindent\hskip\secondaryindent\hbox{#1}\indexdotfill #2\par
2664: }}
2665:
2666: % Define two-column mode, which we use to typeset indexes.
2667: % Adapted from the TeXbook, page 416, which is to say,
2668: % the manmac.tex format used to print the TeXbook itself.
2669: \catcode`\@=11
2670:
2671: \newbox\partialpage
2672: \newdimen\doublecolumnhsize
2673:
2674: \def\begindoublecolumns{\begingroup % ended by \enddoublecolumns
2675: % Grab any single-column material above us.
1.2 ! anton 2676: \output = {\global\setbox\partialpage = \vbox{%
! 2677: %
! 2678: % Here is a possibility not foreseen in manmac: if we accumulate a
! 2679: % whole lot of material, we might end up calling this \output
! 2680: % routine twice in a row (see the doublecol-lose test, which is
! 2681: % essentially a couple of indexes with @setchapternewpage off). In
! 2682: % that case, we must prevent the second \partialpage from
! 2683: % simply overwriting the first, causing us to lose the page.
! 2684: % This will preserve it until a real output routine can ship it
! 2685: % out. Generally, \partialpage will be empty when this runs and
! 2686: % this will be a no-op.
! 2687: \unvbox\partialpage
! 2688: %
! 2689: % Unvbox the main output page.
! 2690: \unvbox255
! 2691: \kern-\topskip \kern\baselineskip
! 2692: }}%
1.1 anton 2693: \eject
2694: %
1.2 ! anton 2695: % Use the double-column output routine for subsequent pages.
! 2696: \output = {\doublecolumnout}%
1.1 anton 2697: %
2698: % Change the page size parameters. We could do this once outside this
2699: % routine, in each of @smallbook, @afourpaper, and the default 8.5x11
2700: % format, but then we repeat the same computation. Repeating a couple
2701: % of assignments once per index is clearly meaningless for the
1.2 ! anton 2702: % execution time, so we may as well do it in one place.
1.1 anton 2703: %
2704: % First we halve the line length, less a little for the gutter between
2705: % the columns. We compute the gutter based on the line length, so it
2706: % changes automatically with the paper format. The magic constant
1.2 ! anton 2707: % below is chosen so that the gutter has the same value (well, +-<1pt)
! 2708: % as it did when we hard-coded it.
1.1 anton 2709: %
2710: % We put the result in a separate register, \doublecolumhsize, so we
2711: % can restore it in \pagesofar, after \hsize itself has (potentially)
2712: % been clobbered.
2713: %
2714: \doublecolumnhsize = \hsize
2715: \advance\doublecolumnhsize by -.04154\hsize
2716: \divide\doublecolumnhsize by 2
2717: \hsize = \doublecolumnhsize
2718: %
2719: % Double the \vsize as well. (We don't need a separate register here,
2720: % since nobody clobbers \vsize.)
2721: \vsize = 2\vsize
2722: }
2723: \def\doublecolumnout{%
2724: \splittopskip=\topskip \splitmaxdepth=\maxdepth
2725: % Get the available space for the double columns -- the normal
2726: % (undoubled) page height minus any material left over from the
2727: % previous page.
2728: \dimen@=\pageheight \advance\dimen@ by-\ht\partialpage
1.2 ! anton 2729: % box0 will be the left-hand column, box2 the right.
1.1 anton 2730: \setbox0=\vsplit255 to\dimen@ \setbox2=\vsplit255 to\dimen@
2731: \onepageout\pagesofar
1.2 ! anton 2732: \unvbox255
! 2733: \penalty\outputpenalty
1.1 anton 2734: }
2735: \def\pagesofar{%
1.2 ! anton 2736: % Re-output the contents of the output page -- any previous material,
1.1 anton 2737: % followed by the two boxes we just split.
2738: \unvbox\partialpage
2739: \hsize = \doublecolumnhsize
2740: \wd0=\hsize \wd2=\hsize \hbox to\pagewidth{\box0\hfil\box2}%
2741: }
2742: \def\enddoublecolumns{%
1.2 ! anton 2743: \output = {\balancecolumns}\eject % split what we have
! 2744: \endgroup % started in \begindoublecolumns
! 2745: %
1.1 anton 2746: % Back to normal single-column typesetting, but take account of the
2747: % fact that we just accumulated some stuff on the output page.
1.2 ! anton 2748: \pagegoal = \vsize
1.1 anton 2749: }
2750: \def\balancecolumns{%
1.2 ! anton 2751: % Called at the end of the double column material.
! 2752: \setbox0 = \vbox{\unvbox255}%
1.1 anton 2753: \dimen@ = \ht0
2754: \advance\dimen@ by \topskip
2755: \advance\dimen@ by-\baselineskip
2756: \divide\dimen@ by 2
2757: \splittopskip = \topskip
2758: % Loop until we get a decent breakpoint.
1.2 ! anton 2759: {\vbadness=10000 \loop
! 2760: \global\setbox3=\copy0
1.1 anton 2761: \global\setbox1=\vsplit3 to\dimen@
1.2 ! anton 2762: \ifdim\ht3>\dimen@ \global\advance\dimen@ by1pt
! 2763: \repeat}%
1.1 anton 2764: \setbox0=\vbox to\dimen@{\unvbox1}%
2765: \setbox2=\vbox to\dimen@{\unvbox3}%
2766: \pagesofar
2767: }
1.2 ! anton 2768: \catcode`\@ = \other
1.1 anton 2769:
2770:
2771: \message{sectioning,}
2772: % Define chapters, sections, etc.
2773:
1.2 ! anton 2774: \newcount\chapno
! 2775: \newcount\secno \secno=0
! 2776: \newcount\subsecno \subsecno=0
! 2777: \newcount\subsubsecno \subsubsecno=0
1.1 anton 2778:
2779: % This counter is funny since it counts through charcodes of letters A, B, ...
1.2 ! anton 2780: \newcount\appendixno \appendixno = `\@
1.1 anton 2781: \def\appendixletter{\char\the\appendixno}
2782:
1.2 ! anton 2783: \newwrite\contentsfile
1.1 anton 2784: % This is called from \setfilename.
1.2 ! anton 2785: \def\opencontents{\openout\contentsfile = \jobname.toc }
1.1 anton 2786:
2787: % Each @chapter defines this as the name of the chapter.
2788: % page headings and footings can use it. @section does likewise
2789:
2790: \def\thischapter{} \def\thissection{}
1.2 ! anton 2791: \def\seccheck#1{\ifnum \pageno<0
! 2792: \errmessage{@#1 not allowed after generating table of contents}%
! 2793: \fi}
1.1 anton 2794:
2795: \def\chapternofonts{%
1.2 ! anton 2796: \let\rawbackslash=\relax
! 2797: \let\frenchspacing=\relax
! 2798: \def\result{\realbackslash result}%
! 2799: \def\equiv{\realbackslash equiv}%
! 2800: \def\expansion{\realbackslash expansion}%
! 2801: \def\print{\realbackslash print}%
! 2802: \def\TeX{\realbackslash TeX}%
! 2803: \def\dots{\realbackslash dots}%
! 2804: \def\result{\realbackslash result}%
! 2805: \def\equiv{\realbackslash equiv}%
! 2806: \def\expansion{\realbackslash expansion}%
! 2807: \def\print{\realbackslash print}%
! 2808: \def\error{\realbackslash error}%
! 2809: \def\point{\realbackslash point}%
! 2810: \def\copyright{\realbackslash copyright}%
! 2811: \def\tt{\realbackslash tt}%
! 2812: \def\bf{\realbackslash bf}%
! 2813: \def\w{\realbackslash w}%
! 2814: \def\less{\realbackslash less}%
! 2815: \def\gtr{\realbackslash gtr}%
! 2816: \def\hat{\realbackslash hat}%
! 2817: \def\char{\realbackslash char}%
! 2818: \def\tclose##1{\realbackslash tclose{##1}}%
! 2819: \def\code##1{\realbackslash code{##1}}%
! 2820: \def\samp##1{\realbackslash samp{##1}}%
! 2821: \def\r##1{\realbackslash r{##1}}%
! 2822: \def\b##1{\realbackslash b{##1}}%
! 2823: \def\key##1{\realbackslash key{##1}}%
! 2824: \def\file##1{\realbackslash file{##1}}%
! 2825: \def\kbd##1{\realbackslash kbd{##1}}%
! 2826: % These are redefined because @smartitalic wouldn't work inside xdef.
! 2827: \def\i##1{\realbackslash i{##1}}%
! 2828: \def\cite##1{\realbackslash cite{##1}}%
! 2829: \def\var##1{\realbackslash var{##1}}%
! 2830: \def\emph##1{\realbackslash emph{##1}}%
! 2831: \def\dfn##1{\realbackslash dfn{##1}}%
1.1 anton 2832: }
2833:
2834: \newcount\absseclevel % used to calculate proper heading level
2835: \newcount\secbase\secbase=0 % @raise/lowersections modify this count
2836:
2837: % @raisesections: treat @section as chapter, @subsection as section, etc.
2838: \def\raisesections{\global\advance\secbase by -1}
2839: \let\up=\raisesections % original BFox name
2840:
2841: % @lowersections: treat @chapter as section, @section as subsection, etc.
2842: \def\lowersections{\global\advance\secbase by 1}
2843: \let\down=\lowersections % original BFox name
2844:
2845: % Choose a numbered-heading macro
2846: % #1 is heading level if unmodified by @raisesections or @lowersections
2847: % #2 is text for heading
2848: \def\numhead#1#2{\absseclevel=\secbase\advance\absseclevel by #1
2849: \ifcase\absseclevel
2850: \chapterzzz{#2}
2851: \or
2852: \seczzz{#2}
2853: \or
2854: \numberedsubseczzz{#2}
2855: \or
2856: \numberedsubsubseczzz{#2}
2857: \else
2858: \ifnum \absseclevel<0
2859: \chapterzzz{#2}
2860: \else
2861: \numberedsubsubseczzz{#2}
2862: \fi
2863: \fi
2864: }
2865:
2866: % like \numhead, but chooses appendix heading levels
2867: \def\apphead#1#2{\absseclevel=\secbase\advance\absseclevel by #1
2868: \ifcase\absseclevel
2869: \appendixzzz{#2}
2870: \or
2871: \appendixsectionzzz{#2}
2872: \or
2873: \appendixsubseczzz{#2}
2874: \or
2875: \appendixsubsubseczzz{#2}
2876: \else
2877: \ifnum \absseclevel<0
2878: \appendixzzz{#2}
2879: \else
2880: \appendixsubsubseczzz{#2}
2881: \fi
2882: \fi
2883: }
2884:
2885: % like \numhead, but chooses numberless heading levels
2886: \def\unnmhead#1#2{\absseclevel=\secbase\advance\absseclevel by #1
2887: \ifcase\absseclevel
2888: \unnumberedzzz{#2}
2889: \or
2890: \unnumberedseczzz{#2}
2891: \or
2892: \unnumberedsubseczzz{#2}
2893: \or
2894: \unnumberedsubsubseczzz{#2}
2895: \else
2896: \ifnum \absseclevel<0
2897: \unnumberedzzz{#2}
2898: \else
2899: \unnumberedsubsubseczzz{#2}
2900: \fi
2901: \fi
2902: }
2903:
2904:
2905: \def\thischaptername{No Chapter Title}
2906: \outer\def\chapter{\parsearg\chapteryyy}
2907: \def\chapteryyy #1{\numhead0{#1}} % normally numhead0 calls chapterzzz
2908: \def\chapterzzz #1{\seccheck{chapter}%
2909: \secno=0 \subsecno=0 \subsubsecno=0
2910: \global\advance \chapno by 1 \message{\putwordChapter \the\chapno}%
2911: \chapmacro {#1}{\the\chapno}%
2912: \gdef\thissection{#1}%
2913: \gdef\thischaptername{#1}%
2914: % We don't substitute the actual chapter name into \thischapter
2915: % because we don't want its macros evaluated now.
2916: \xdef\thischapter{\putwordChapter{} \the\chapno: \noexpand\thischaptername}%
2917: {\chapternofonts%
1.2 ! anton 2918: \toks0 = {#1}%
! 2919: \edef\temp{{\realbackslash chapentry{\the\toks0}{\the\chapno}{\noexpand\folio}}}%
1.1 anton 2920: \escapechar=`\\%
2921: \write \contentsfile \temp %
2922: \donoderef %
2923: \global\let\section = \numberedsec
2924: \global\let\subsection = \numberedsubsec
2925: \global\let\subsubsection = \numberedsubsubsec
2926: }}
2927:
2928: \outer\def\appendix{\parsearg\appendixyyy}
2929: \def\appendixyyy #1{\apphead0{#1}} % normally apphead0 calls appendixzzz
2930: \def\appendixzzz #1{\seccheck{appendix}%
2931: \secno=0 \subsecno=0 \subsubsecno=0
2932: \global\advance \appendixno by 1 \message{Appendix \appendixletter}%
2933: \chapmacro {#1}{\putwordAppendix{} \appendixletter}%
2934: \gdef\thissection{#1}%
2935: \gdef\thischaptername{#1}%
2936: \xdef\thischapter{\putwordAppendix{} \appendixletter: \noexpand\thischaptername}%
2937: {\chapternofonts%
1.2 ! anton 2938: \toks0 = {#1}%
! 2939: \edef\temp{{\realbackslash chapentry{\the\toks0}%
! 2940: {\putwordAppendix{} \appendixletter}{\noexpand\folio}}}%
1.1 anton 2941: \escapechar=`\\%
2942: \write \contentsfile \temp %
2943: \appendixnoderef %
2944: \global\let\section = \appendixsec
2945: \global\let\subsection = \appendixsubsec
2946: \global\let\subsubsection = \appendixsubsubsec
2947: }}
2948:
2949: % @centerchap is like @unnumbered, but the heading is centered.
2950: \outer\def\centerchap{\parsearg\centerchapyyy}
2951: \def\centerchapyyy #1{{\let\unnumbchapmacro=\centerchapmacro \unnumberedyyy{#1}}}
2952:
2953: \outer\def\top{\parsearg\unnumberedyyy}
2954: \outer\def\unnumbered{\parsearg\unnumberedyyy}
2955: \def\unnumberedyyy #1{\unnmhead0{#1}} % normally unnmhead0 calls unnumberedzzz
2956: \def\unnumberedzzz #1{\seccheck{unnumbered}%
2957: \secno=0 \subsecno=0 \subsubsecno=0
2958: %
2959: % This used to be simply \message{#1}, but TeX fully expands the
2960: % argument to \message. Therefore, if #1 contained @-commands, TeX
2961: % expanded them. For example, in `@unnumbered The @cite{Book}', TeX
2962: % expanded @cite (which turns out to cause errors because \cite is meant
2963: % to be executed, not expanded).
2964: %
2965: % Anyway, we don't want the fully-expanded definition of @cite to appear
2966: % as a result of the \message, we just want `@cite' itself. We use
2967: % \the<toks register> to achieve this: TeX expands \the<toks> only once,
2968: % simply yielding the contents of the <toks register>.
2969: \toks0 = {#1}\message{(\the\toks0)}%
2970: %
2971: \unnumbchapmacro {#1}%
2972: \gdef\thischapter{#1}\gdef\thissection{#1}%
2973: {\chapternofonts%
1.2 ! anton 2974: \toks0 = {#1}%
! 2975: \edef\temp{{\realbackslash unnumbchapentry{\the\toks0}{\noexpand\folio}}}%
1.1 anton 2976: \escapechar=`\\%
2977: \write \contentsfile \temp %
2978: \unnumbnoderef %
2979: \global\let\section = \unnumberedsec
2980: \global\let\subsection = \unnumberedsubsec
2981: \global\let\subsubsection = \unnumberedsubsubsec
2982: }}
2983:
2984: \outer\def\numberedsec{\parsearg\secyyy}
2985: \def\secyyy #1{\numhead1{#1}} % normally calls seczzz
2986: \def\seczzz #1{\seccheck{section}%
2987: \subsecno=0 \subsubsecno=0 \global\advance \secno by 1 %
2988: \gdef\thissection{#1}\secheading {#1}{\the\chapno}{\the\secno}%
2989: {\chapternofonts%
1.2 ! anton 2990: \toks0 = {#1}%
1.1 anton 2991: \edef\temp{{\realbackslash secentry %
1.2 ! anton 2992: {\the\toks0}{\the\chapno}{\the\secno}{\noexpand\folio}}}%
1.1 anton 2993: \escapechar=`\\%
2994: \write \contentsfile \temp %
2995: \donoderef %
2996: \penalty 10000 %
2997: }}
2998:
2999: \outer\def\appendixsection{\parsearg\appendixsecyyy}
3000: \outer\def\appendixsec{\parsearg\appendixsecyyy}
3001: \def\appendixsecyyy #1{\apphead1{#1}} % normally calls appendixsectionzzz
3002: \def\appendixsectionzzz #1{\seccheck{appendixsection}%
3003: \subsecno=0 \subsubsecno=0 \global\advance \secno by 1 %
3004: \gdef\thissection{#1}\secheading {#1}{\appendixletter}{\the\secno}%
3005: {\chapternofonts%
1.2 ! anton 3006: \toks0 = {#1}%
1.1 anton 3007: \edef\temp{{\realbackslash secentry %
1.2 ! anton 3008: {\the\toks0}{\appendixletter}{\the\secno}{\noexpand\folio}}}%
1.1 anton 3009: \escapechar=`\\%
3010: \write \contentsfile \temp %
3011: \appendixnoderef %
3012: \penalty 10000 %
3013: }}
3014:
3015: \outer\def\unnumberedsec{\parsearg\unnumberedsecyyy}
3016: \def\unnumberedsecyyy #1{\unnmhead1{#1}} % normally calls unnumberedseczzz
3017: \def\unnumberedseczzz #1{\seccheck{unnumberedsec}%
3018: \plainsecheading {#1}\gdef\thissection{#1}%
3019: {\chapternofonts%
1.2 ! anton 3020: \toks0 = {#1}%
! 3021: \edef\temp{{\realbackslash unnumbsecentry{\the\toks0}{\noexpand\folio}}}%
1.1 anton 3022: \escapechar=`\\%
3023: \write \contentsfile \temp %
3024: \unnumbnoderef %
3025: \penalty 10000 %
3026: }}
3027:
3028: \outer\def\numberedsubsec{\parsearg\numberedsubsecyyy}
3029: \def\numberedsubsecyyy #1{\numhead2{#1}} % normally calls numberedsubseczzz
3030: \def\numberedsubseczzz #1{\seccheck{subsection}%
3031: \gdef\thissection{#1}\subsubsecno=0 \global\advance \subsecno by 1 %
3032: \subsecheading {#1}{\the\chapno}{\the\secno}{\the\subsecno}%
3033: {\chapternofonts%
1.2 ! anton 3034: \toks0 = {#1}%
1.1 anton 3035: \edef\temp{{\realbackslash subsecentry %
1.2 ! anton 3036: {\the\toks0}{\the\chapno}{\the\secno}{\the\subsecno}{\noexpand\folio}}}%
1.1 anton 3037: \escapechar=`\\%
3038: \write \contentsfile \temp %
3039: \donoderef %
3040: \penalty 10000 %
3041: }}
3042:
3043: \outer\def\appendixsubsec{\parsearg\appendixsubsecyyy}
3044: \def\appendixsubsecyyy #1{\apphead2{#1}} % normally calls appendixsubseczzz
3045: \def\appendixsubseczzz #1{\seccheck{appendixsubsec}%
3046: \gdef\thissection{#1}\subsubsecno=0 \global\advance \subsecno by 1 %
3047: \subsecheading {#1}{\appendixletter}{\the\secno}{\the\subsecno}%
3048: {\chapternofonts%
1.2 ! anton 3049: \toks0 = {#1}%
1.1 anton 3050: \edef\temp{{\realbackslash subsecentry %
1.2 ! anton 3051: {\the\toks0}{\appendixletter}{\the\secno}{\the\subsecno}{\noexpand\folio}}}%
1.1 anton 3052: \escapechar=`\\%
3053: \write \contentsfile \temp %
3054: \appendixnoderef %
3055: \penalty 10000 %
3056: }}
3057:
3058: \outer\def\unnumberedsubsec{\parsearg\unnumberedsubsecyyy}
3059: \def\unnumberedsubsecyyy #1{\unnmhead2{#1}} %normally calls unnumberedsubseczzz
3060: \def\unnumberedsubseczzz #1{\seccheck{unnumberedsubsec}%
3061: \plainsubsecheading {#1}\gdef\thissection{#1}%
3062: {\chapternofonts%
1.2 ! anton 3063: \toks0 = {#1}%
! 3064: \edef\temp{{\realbackslash unnumbsubsecentry{\the\toks0}{\noexpand\folio}}}%
1.1 anton 3065: \escapechar=`\\%
3066: \write \contentsfile \temp %
3067: \unnumbnoderef %
3068: \penalty 10000 %
3069: }}
3070:
3071: \outer\def\numberedsubsubsec{\parsearg\numberedsubsubsecyyy}
3072: \def\numberedsubsubsecyyy #1{\numhead3{#1}} % normally numberedsubsubseczzz
3073: \def\numberedsubsubseczzz #1{\seccheck{subsubsection}%
3074: \gdef\thissection{#1}\global\advance \subsubsecno by 1 %
3075: \subsubsecheading {#1}
3076: {\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}%
3077: {\chapternofonts%
1.2 ! anton 3078: \toks0 = {#1}%
! 3079: \edef\temp{{\realbackslash subsubsecentry{\the\toks0}
1.1 anton 3080: {\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}
3081: {\noexpand\folio}}}%
3082: \escapechar=`\\%
3083: \write \contentsfile \temp %
3084: \donoderef %
3085: \penalty 10000 %
3086: }}
3087:
3088: \outer\def\appendixsubsubsec{\parsearg\appendixsubsubsecyyy}
3089: \def\appendixsubsubsecyyy #1{\apphead3{#1}} % normally appendixsubsubseczzz
3090: \def\appendixsubsubseczzz #1{\seccheck{appendixsubsubsec}%
3091: \gdef\thissection{#1}\global\advance \subsubsecno by 1 %
3092: \subsubsecheading {#1}
3093: {\appendixletter}{\the\secno}{\the\subsecno}{\the\subsubsecno}%
3094: {\chapternofonts%
1.2 ! anton 3095: \toks0 = {#1}%
! 3096: \edef\temp{{\realbackslash subsubsecentry{\the\toks0}%
1.1 anton 3097: {\appendixletter}
3098: {\the\secno}{\the\subsecno}{\the\subsubsecno}{\noexpand\folio}}}%
3099: \escapechar=`\\%
3100: \write \contentsfile \temp %
3101: \appendixnoderef %
3102: \penalty 10000 %
3103: }}
3104:
3105: \outer\def\unnumberedsubsubsec{\parsearg\unnumberedsubsubsecyyy}
3106: \def\unnumberedsubsubsecyyy #1{\unnmhead3{#1}} %normally unnumberedsubsubseczzz
3107: \def\unnumberedsubsubseczzz #1{\seccheck{unnumberedsubsubsec}%
3108: \plainsubsubsecheading {#1}\gdef\thissection{#1}%
3109: {\chapternofonts%
1.2 ! anton 3110: \toks0 = {#1}%
! 3111: \edef\temp{{\realbackslash unnumbsubsubsecentry{\the\toks0}{\noexpand\folio}}}%
1.1 anton 3112: \escapechar=`\\%
3113: \write \contentsfile \temp %
3114: \unnumbnoderef %
3115: \penalty 10000 %
3116: }}
3117:
3118: % These are variants which are not "outer", so they can appear in @ifinfo.
3119: % Actually, they should now be obsolete; ordinary section commands should work.
3120: \def\infotop{\parsearg\unnumberedzzz}
3121: \def\infounnumbered{\parsearg\unnumberedzzz}
3122: \def\infounnumberedsec{\parsearg\unnumberedseczzz}
3123: \def\infounnumberedsubsec{\parsearg\unnumberedsubseczzz}
3124: \def\infounnumberedsubsubsec{\parsearg\unnumberedsubsubseczzz}
3125:
3126: \def\infoappendix{\parsearg\appendixzzz}
3127: \def\infoappendixsec{\parsearg\appendixseczzz}
3128: \def\infoappendixsubsec{\parsearg\appendixsubseczzz}
3129: \def\infoappendixsubsubsec{\parsearg\appendixsubsubseczzz}
3130:
3131: \def\infochapter{\parsearg\chapterzzz}
3132: \def\infosection{\parsearg\sectionzzz}
3133: \def\infosubsection{\parsearg\subsectionzzz}
3134: \def\infosubsubsection{\parsearg\subsubsectionzzz}
3135:
3136: % These macros control what the section commands do, according
3137: % to what kind of chapter we are in (ordinary, appendix, or unnumbered).
3138: % Define them by default for a numbered chapter.
3139: \global\let\section = \numberedsec
3140: \global\let\subsection = \numberedsubsec
3141: \global\let\subsubsection = \numberedsubsubsec
3142:
3143: % Define @majorheading, @heading and @subheading
3144:
3145: % NOTE on use of \vbox for chapter headings, section headings, and
3146: % such:
3147: % 1) We use \vbox rather than the earlier \line to permit
3148: % overlong headings to fold.
3149: % 2) \hyphenpenalty is set to 10000 because hyphenation in a
3150: % heading is obnoxious; this forbids it.
3151: % 3) Likewise, headings look best if no \parindent is used, and
3152: % if justification is not attempted. Hence \raggedright.
3153:
3154:
3155: \def\majorheading{\parsearg\majorheadingzzz}
3156: \def\majorheadingzzz #1{%
3157: {\advance\chapheadingskip by 10pt \chapbreak }%
3158: {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
3159: \parindent=0pt\raggedright
3160: \rm #1\hfill}}\bigskip \par\penalty 200}
3161:
3162: \def\chapheading{\parsearg\chapheadingzzz}
3163: \def\chapheadingzzz #1{\chapbreak %
3164: {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
3165: \parindent=0pt\raggedright
3166: \rm #1\hfill}}\bigskip \par\penalty 200}
3167:
3168: % @heading, @subheading, @subsubheading.
3169: \def\heading{\parsearg\plainsecheading}
3170: \def\subheading{\parsearg\plainsubsecheading}
3171: \def\subsubheading{\parsearg\plainsubsubsecheading}
3172:
3173: % These macros generate a chapter, section, etc. heading only
3174: % (including whitespace, linebreaking, etc. around it),
3175: % given all the information in convenient, parsed form.
3176:
3177: %%% Args are the skip and penalty (usually negative)
3178: \def\dobreak#1#2{\par\ifdim\lastskip<#1\removelastskip\penalty#2\vskip#1\fi}
3179:
3180: \def\setchapterstyle #1 {\csname CHAPF#1\endcsname}
3181:
3182: %%% Define plain chapter starts, and page on/off switching for it
3183: % Parameter controlling skip before chapter headings (if needed)
3184:
3185: \newskip\chapheadingskip
3186:
3187: \def\chapbreak{\dobreak \chapheadingskip {-4000}}
3188: \def\chappager{\par\vfill\supereject}
3189: \def\chapoddpage{\chappager \ifodd\pageno \else \hbox to 0pt{} \chappager\fi}
3190:
3191: \def\setchapternewpage #1 {\csname CHAPPAG#1\endcsname}
3192:
3193: \def\CHAPPAGoff{
3194: \global\let\contentsalignmacro = \chappager
3195: \global\let\pchapsepmacro=\chapbreak
3196: \global\let\pagealignmacro=\chappager}
3197:
3198: \def\CHAPPAGon{
3199: \global\let\contentsalignmacro = \chappager
3200: \global\let\pchapsepmacro=\chappager
3201: \global\let\pagealignmacro=\chappager
3202: \global\def\HEADINGSon{\HEADINGSsingle}}
3203:
3204: \def\CHAPPAGodd{
3205: \global\let\contentsalignmacro = \chapoddpage
3206: \global\let\pchapsepmacro=\chapoddpage
3207: \global\let\pagealignmacro=\chapoddpage
3208: \global\def\HEADINGSon{\HEADINGSdouble}}
3209:
3210: \CHAPPAGon
3211:
3212: \def\CHAPFplain{
3213: \global\let\chapmacro=\chfplain
3214: \global\let\unnumbchapmacro=\unnchfplain
3215: \global\let\centerchapmacro=\centerchfplain}
3216:
3217: % Plain chapter opening.
3218: % #1 is the text, #2 the chapter number or empty if unnumbered.
3219: \def\chfplain#1#2{%
3220: \pchapsepmacro
3221: {%
3222: \chapfonts \rm
3223: \def\chapnum{#2}%
3224: \setbox0 = \hbox{#2\ifx\chapnum\empty\else\enspace\fi}%
3225: \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright
3226: \hangindent = \wd0 \centerparametersmaybe
3227: \unhbox0 #1\par}%
3228: }%
3229: \nobreak\bigskip % no page break after a chapter title
3230: \nobreak
3231: }
3232:
3233: % Plain opening for unnumbered.
3234: \def\unnchfplain#1{\chfplain{#1}{}}
3235:
3236: % @centerchap -- centered and unnumbered.
3237: \let\centerparametersmaybe = \relax
3238: \def\centerchfplain#1{{%
3239: \def\centerparametersmaybe{%
3240: \advance\rightskip by 3\rightskip
3241: \leftskip = \rightskip
3242: \parfillskip = 0pt
3243: }%
3244: \chfplain{#1}{}%
3245: }}
3246:
3247: \CHAPFplain % The default
3248:
3249: \def\unnchfopen #1{%
3250: \chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
3251: \parindent=0pt\raggedright
3252: \rm #1\hfill}}\bigskip \par\penalty 10000 %
3253: }
3254:
3255: \def\chfopen #1#2{\chapoddpage {\chapfonts
3256: \vbox to 3in{\vfil \hbox to\hsize{\hfil #2} \hbox to\hsize{\hfil #1} \vfil}}%
3257: \par\penalty 5000 %
3258: }
3259:
3260: \def\centerchfopen #1{%
3261: \chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
3262: \parindent=0pt
3263: \hfill {\rm #1}\hfill}}\bigskip \par\penalty 10000 %
3264: }
3265:
3266: \def\CHAPFopen{
3267: \global\let\chapmacro=\chfopen
3268: \global\let\unnumbchapmacro=\unnchfopen
3269: \global\let\centerchapmacro=\centerchfopen}
3270:
3271:
3272: % Section titles.
3273: \newskip\secheadingskip
3274: \def\secheadingbreak{\dobreak \secheadingskip {-1000}}
3275: \def\secheading#1#2#3{\sectionheading{sec}{#2.#3}{#1}}
3276: \def\plainsecheading#1{\sectionheading{sec}{}{#1}}
3277:
3278: % Subsection titles.
3279: \newskip \subsecheadingskip
3280: \def\subsecheadingbreak{\dobreak \subsecheadingskip {-500}}
3281: \def\subsecheading#1#2#3#4{\sectionheading{subsec}{#2.#3.#4}{#1}}
3282: \def\plainsubsecheading#1{\sectionheading{subsec}{}{#1}}
3283:
3284: % Subsubsection titles.
3285: \let\subsubsecheadingskip = \subsecheadingskip
3286: \let\subsubsecheadingbreak = \subsecheadingbreak
3287: \def\subsubsecheading#1#2#3#4#5{\sectionheading{subsubsec}{#2.#3.#4.#5}{#1}}
3288: \def\plainsubsubsecheading#1{\sectionheading{subsubsec}{}{#1}}
3289:
3290:
3291: % Print any size section title.
1.2 ! anton 3292: %
1.1 anton 3293: % #1 is the section type (sec/subsec/subsubsec), #2 is the section
3294: % number (maybe empty), #3 the text.
3295: \def\sectionheading#1#2#3{%
3296: {%
3297: \expandafter\advance\csname #1headingskip\endcsname by \parskip
3298: \csname #1headingbreak\endcsname
3299: }%
3300: {%
3301: % Switch to the right set of fonts.
3302: \csname #1fonts\endcsname \rm
3303: %
3304: % Only insert the separating space if we have a section number.
3305: \def\secnum{#2}%
3306: \setbox0 = \hbox{#2\ifx\secnum\empty\else\enspace\fi}%
3307: %
3308: \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright
3309: \hangindent = \wd0 % zero if no section number
3310: \unhbox0 #3}%
3311: }%
3312: \ifdim\parskip<10pt \nobreak\kern10pt\nobreak\kern-\parskip\fi \nobreak
3313: }
3314:
3315:
3316: \message{toc printing,}
3317: % Finish up the main text and prepare to read what we've written
3318: % to \contentsfile.
3319:
3320: \newskip\contentsrightmargin \contentsrightmargin=1in
3321: \def\startcontents#1{%
3322: % If @setchapternewpage on, and @headings double, the contents should
3323: % start on an odd page, unlike chapters. Thus, we maintain
3324: % \contentsalignmacro in parallel with \pagealignmacro.
3325: % From: Torbjorn Granlund <tege@matematik.su.se>
3326: \contentsalignmacro
3327: \immediate\closeout \contentsfile
3328: \ifnum \pageno>0
3329: \pageno = -1 % Request roman numbered pages.
3330: \fi
3331: % Don't need to put `Contents' or `Short Contents' in the headline.
3332: % It is abundantly clear what they are.
3333: \unnumbchapmacro{#1}\def\thischapter{}%
3334: \begingroup % Set up to handle contents files properly.
3335: \catcode`\\=0 \catcode`\{=1 \catcode`\}=2 \catcode`\@=11
1.2 ! anton 3336: % We can't do this, because then an actual ^ in a section
! 3337: % title fails, e.g., @chapter ^ -- exponentiation. --karl, 9jul97.
! 3338: %\catcode`\^=7 % to see ^^e4 as \"a etc. juha@piuha.ydi.vtt.fi
1.1 anton 3339: \raggedbottom % Worry more about breakpoints than the bottom.
3340: \advance\hsize by -\contentsrightmargin % Don't use the full line length.
3341: }
3342:
3343:
3344: % Normal (long) toc.
3345: \outer\def\contents{%
3346: \startcontents{\putwordTableofContents}%
3347: \input \jobname.toc
3348: \endgroup
3349: \vfill \eject
3350: }
3351:
3352: % And just the chapters.
3353: \outer\def\summarycontents{%
3354: \startcontents{\putwordShortContents}%
3355: %
3356: \let\chapentry = \shortchapentry
3357: \let\unnumbchapentry = \shortunnumberedentry
3358: % We want a true roman here for the page numbers.
3359: \secfonts
3360: \let\rm=\shortcontrm \let\bf=\shortcontbf \let\sl=\shortcontsl
3361: \rm
3362: \hyphenpenalty = 10000
3363: \advance\baselineskip by 1pt % Open it up a little.
3364: \def\secentry ##1##2##3##4{}
3365: \def\unnumbsecentry ##1##2{}
3366: \def\subsecentry ##1##2##3##4##5{}
3367: \def\unnumbsubsecentry ##1##2{}
3368: \def\subsubsecentry ##1##2##3##4##5##6{}
3369: \def\unnumbsubsubsecentry ##1##2{}
3370: \input \jobname.toc
3371: \endgroup
3372: \vfill \eject
3373: }
3374: \let\shortcontents = \summarycontents
3375:
3376: % These macros generate individual entries in the table of contents.
3377: % The first argument is the chapter or section name.
3378: % The last argument is the page number.
3379: % The arguments in between are the chapter number, section number, ...
3380:
3381: % Chapter-level things, for both the long and short contents.
3382: \def\chapentry#1#2#3{\dochapentry{#2\labelspace#1}{#3}}
3383:
3384: % See comments in \dochapentry re vbox and related settings
3385: \def\shortchapentry#1#2#3{%
3386: \tocentry{\shortchaplabel{#2}\labelspace #1}{\doshortpageno{#3}}%
3387: }
3388:
3389: % Typeset the label for a chapter or appendix for the short contents.
3390: % The arg is, e.g. `Appendix A' for an appendix, or `3' for a chapter.
3391: % We could simplify the code here by writing out an \appendixentry
3392: % command in the toc file for appendices, instead of using \chapentry
3393: % for both, but it doesn't seem worth it.
3394: \setbox0 = \hbox{\shortcontrm \putwordAppendix }
3395: \newdimen\shortappendixwidth \shortappendixwidth = \wd0
3396:
3397: \def\shortchaplabel#1{%
3398: % We typeset #1 in a box of constant width, regardless of the text of
3399: % #1, so the chapter titles will come out aligned.
3400: \setbox0 = \hbox{#1}%
3401: \dimen0 = \ifdim\wd0 > \shortappendixwidth \shortappendixwidth \else 0pt \fi
3402: %
3403: % This space should be plenty, since a single number is .5em, and the
3404: % widest letter (M) is 1em, at least in the Computer Modern fonts.
3405: % (This space doesn't include the extra space that gets added after
3406: % the label; that gets put in by \shortchapentry above.)
3407: \advance\dimen0 by 1.1em
3408: \hbox to \dimen0{#1\hfil}%
3409: }
3410:
3411: \def\unnumbchapentry#1#2{\dochapentry{#1}{#2}}
3412: \def\shortunnumberedentry#1#2{\tocentry{#1}{\doshortpageno{#2}}}
3413:
3414: % Sections.
3415: \def\secentry#1#2#3#4{\dosecentry{#2.#3\labelspace#1}{#4}}
3416: \def\unnumbsecentry#1#2{\dosecentry{#1}{#2}}
3417:
3418: % Subsections.
3419: \def\subsecentry#1#2#3#4#5{\dosubsecentry{#2.#3.#4\labelspace#1}{#5}}
3420: \def\unnumbsubsecentry#1#2{\dosubsecentry{#1}{#2}}
3421:
3422: % And subsubsections.
3423: \def\subsubsecentry#1#2#3#4#5#6{%
3424: \dosubsubsecentry{#2.#3.#4.#5\labelspace#1}{#6}}
3425: \def\unnumbsubsubsecentry#1#2{\dosubsubsecentry{#1}{#2}}
3426:
3427: % This parameter controls the indentation of the various levels.
3428: \newdimen\tocindent \tocindent = 3pc
3429:
3430: % Now for the actual typesetting. In all these, #1 is the text and #2 is the
3431: % page number.
3432: %
3433: % If the toc has to be broken over pages, we want it to be at chapters
3434: % if at all possible; hence the \penalty.
3435: \def\dochapentry#1#2{%
3436: \penalty-300 \vskip1\baselineskip plus.33\baselineskip minus.25\baselineskip
3437: \begingroup
3438: \chapentryfonts
3439: \tocentry{#1}{\dopageno{#2}}%
3440: \endgroup
3441: \nobreak\vskip .25\baselineskip plus.1\baselineskip
3442: }
3443:
3444: \def\dosecentry#1#2{\begingroup
3445: \secentryfonts \leftskip=\tocindent
3446: \tocentry{#1}{\dopageno{#2}}%
3447: \endgroup}
3448:
3449: \def\dosubsecentry#1#2{\begingroup
3450: \subsecentryfonts \leftskip=2\tocindent
3451: \tocentry{#1}{\dopageno{#2}}%
3452: \endgroup}
3453:
3454: \def\dosubsubsecentry#1#2{\begingroup
3455: \subsubsecentryfonts \leftskip=3\tocindent
3456: \tocentry{#1}{\dopageno{#2}}%
3457: \endgroup}
3458:
3459: % Final typesetting of a toc entry; we use the same \entry macro as for
3460: % the index entries, but we want to suppress hyphenation here. (We
3461: % can't do that in the \entry macro, since index entries might consist
3462: % of hyphenated-identifiers-that-do-not-fit-on-a-line-and-nothing-else.)
3463: \def\tocentry#1#2{\begingroup
3464: \vskip 0pt plus1pt % allow a little stretch for the sake of nice page breaks
1.2 ! anton 3465: % Do not use \turnoffactive in these arguments. Since the toc is
! 3466: % typeset in cmr, so characters such as _ would come out wrong; we
! 3467: % have to do the usual translation tricks.
! 3468: \entry{#1}{#2}%
1.1 anton 3469: \endgroup}
3470:
3471: % Space between chapter (or whatever) number and the title.
3472: \def\labelspace{\hskip1em \relax}
3473:
3474: \def\dopageno#1{{\rm #1}}
3475: \def\doshortpageno#1{{\rm #1}}
3476:
3477: \def\chapentryfonts{\secfonts \rm}
3478: \def\secentryfonts{\textfonts}
3479: \let\subsecentryfonts = \textfonts
3480: \let\subsubsecentryfonts = \textfonts
3481:
3482:
3483: \message{environments,}
3484:
3485: % Since these characters are used in examples, it should be an even number of
3486: % \tt widths. Each \tt character is 1en, so two makes it 1em.
3487: % Furthermore, these definitions must come after we define our fonts.
3488: \newbox\dblarrowbox \newbox\longdblarrowbox
3489: \newbox\pushcharbox \newbox\bullbox
3490: \newbox\equivbox \newbox\errorbox
3491:
3492: %{\tentt
3493: %\global\setbox\dblarrowbox = \hbox to 1em{\hfil$\Rightarrow$\hfil}
3494: %\global\setbox\longdblarrowbox = \hbox to 1em{\hfil$\mapsto$\hfil}
3495: %\global\setbox\pushcharbox = \hbox to 1em{\hfil$\dashv$\hfil}
3496: %\global\setbox\equivbox = \hbox to 1em{\hfil$\ptexequiv$\hfil}
3497: % Adapted from the manmac format (p.420 of TeXbook)
3498: %\global\setbox\bullbox = \hbox to 1em{\kern.15em\vrule height .75ex width .85ex
3499: % depth .1ex\hfil}
3500: %}
3501:
3502: % @point{}, @result{}, @expansion{}, @print{}, @equiv{}.
3503: \def\point{$\star$}
3504: \def\result{\leavevmode\raise.15ex\hbox to 1em{\hfil$\Rightarrow$\hfil}}
3505: \def\expansion{\leavevmode\raise.1ex\hbox to 1em{\hfil$\mapsto$\hfil}}
3506: \def\print{\leavevmode\lower.1ex\hbox to 1em{\hfil$\dashv$\hfil}}
3507: \def\equiv{\leavevmode\lower.1ex\hbox to 1em{\hfil$\ptexequiv$\hfil}}
3508:
3509: % Adapted from the TeXbook's \boxit.
3510: {\tentt \global\dimen0 = 3em}% Width of the box.
3511: \dimen2 = .55pt % Thickness of rules
3512: % The text. (`r' is open on the right, `e' somewhat less so on the left.)
3513: \setbox0 = \hbox{\kern-.75pt \tensf error\kern-1.5pt}
3514:
3515: \global\setbox\errorbox=\hbox to \dimen0{\hfil
3516: \hsize = \dimen0 \advance\hsize by -5.8pt % Space to left+right.
3517: \advance\hsize by -2\dimen2 % Rules.
3518: \vbox{
3519: \hrule height\dimen2
3520: \hbox{\vrule width\dimen2 \kern3pt % Space to left of text.
3521: \vtop{\kern2.4pt \box0 \kern2.4pt}% Space above/below.
3522: \kern3pt\vrule width\dimen2}% Space to right.
3523: \hrule height\dimen2}
3524: \hfil}
3525:
3526: % The @error{} command.
3527: \def\error{\leavevmode\lower.7ex\copy\errorbox}
3528:
3529: % @tex ... @end tex escapes into raw Tex temporarily.
3530: % One exception: @ is still an escape character, so that @end tex works.
3531: % But \@ or @@ will get a plain tex @ character.
3532:
3533: \def\tex{\begingroup
1.2 ! anton 3534: \catcode `\\=0 \catcode `\{=1 \catcode `\}=2
! 3535: \catcode `\$=3 \catcode `\&=4 \catcode `\#=6
! 3536: \catcode `\^=7 \catcode `\_=8 \catcode `\~=13 \let~=\tie
! 3537: \catcode `\%=14
! 3538: \catcode 43=12 % plus
! 3539: \catcode`\"=12
! 3540: \catcode`\==12
! 3541: \catcode`\|=12
! 3542: \catcode`\<=12
! 3543: \catcode`\>=12
! 3544: \escapechar=`\\
! 3545: %
! 3546: \let\b=\ptexb
! 3547: \let\bullet=\ptexbullet
! 3548: \let\c=\ptexc
! 3549: \let\,=\ptexcomma
! 3550: \let\.=\ptexdot
! 3551: \let\dots=\ptexdots
! 3552: \let\equiv=\ptexequiv
! 3553: \let\!=\ptexexclam
! 3554: \let\i=\ptexi
! 3555: \let\{=\ptexlbrace
! 3556: \let\}=\ptexrbrace
! 3557: \let\*=\ptexstar
! 3558: \let\t=\ptext
! 3559: %
! 3560: \def\endldots{\mathinner{\ldots\ldots\ldots\ldots}}%
! 3561: \def\enddots{\relax\ifmmode\endldots\else$\mathsurround=0pt \endldots\,$\fi}%
! 3562: \def\@{@}%
1.1 anton 3563: \let\Etex=\endgroup}
3564:
3565: % Define @lisp ... @endlisp.
3566: % @lisp does a \begingroup so it can rebind things,
3567: % including the definition of @endlisp (which normally is erroneous).
3568:
3569: % Amount to narrow the margins by for @lisp.
3570: \newskip\lispnarrowing \lispnarrowing=0.4in
3571:
3572: % This is the definition that ^^M gets inside @lisp, @example, and other
3573: % such environments. \null is better than a space, since it doesn't
3574: % have any width.
3575: \def\lisppar{\null\endgraf}
3576:
3577: % Make each space character in the input produce a normal interword
3578: % space in the output. Don't allow a line break at this space, as this
3579: % is used only in environments like @example, where each line of input
3580: % should produce a line of output anyway.
3581: %
3582: {\obeyspaces %
3583: \gdef\sepspaces{\obeyspaces\let =\tie}}
3584:
3585: % Define \obeyedspace to be our active space, whatever it is. This is
3586: % for use in \parsearg.
3587: {\sepspaces%
3588: \global\let\obeyedspace= }
3589:
3590: % This space is always present above and below environments.
3591: \newskip\envskipamount \envskipamount = 0pt
3592:
3593: % Make spacing and below environment symmetrical. We use \parskip here
3594: % to help in doing that, since in @example-like environments \parskip
3595: % is reset to zero; thus the \afterenvbreak inserts no space -- but the
3596: % start of the next paragraph will insert \parskip
3597: %
3598: \def\aboveenvbreak{{\advance\envskipamount by \parskip
3599: \endgraf \ifdim\lastskip<\envskipamount
3600: \removelastskip \penalty-50 \vskip\envskipamount \fi}}
3601:
3602: \let\afterenvbreak = \aboveenvbreak
3603:
3604: % \nonarrowing is a flag. If "set", @lisp etc don't narrow margins.
3605: \let\nonarrowing=\relax
3606:
3607: %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
3608: % \cartouche: draw rectangle w/rounded corners around argument
3609: \font\circle=lcircle10
3610: \newdimen\circthick
3611: \newdimen\cartouter\newdimen\cartinner
3612: \newskip\normbskip\newskip\normpskip\newskip\normlskip
3613: \circthick=\fontdimen8\circle
3614: %
3615: \def\ctl{{\circle\char'013\hskip -6pt}}% 6pt from pl file: 1/2charwidth
3616: \def\ctr{{\hskip 6pt\circle\char'010}}
3617: \def\cbl{{\circle\char'012\hskip -6pt}}
3618: \def\cbr{{\hskip 6pt\circle\char'011}}
3619: \def\carttop{\hbox to \cartouter{\hskip\lskip
3620: \ctl\leaders\hrule height\circthick\hfil\ctr
3621: \hskip\rskip}}
3622: \def\cartbot{\hbox to \cartouter{\hskip\lskip
3623: \cbl\leaders\hrule height\circthick\hfil\cbr
3624: \hskip\rskip}}
3625: %
3626: \newskip\lskip\newskip\rskip
3627:
3628: \long\def\cartouche{%
3629: \begingroup
3630: \lskip=\leftskip \rskip=\rightskip
3631: \leftskip=0pt\rightskip=0pt %we want these *outside*.
3632: \cartinner=\hsize \advance\cartinner by-\lskip
3633: \advance\cartinner by-\rskip
3634: \cartouter=\hsize
3635: \advance\cartouter by 18pt % allow for 3pt kerns on either
3636: % side, and for 6pt waste from
3637: % each corner char
3638: \normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip
3639: % Flag to tell @lisp, etc., not to narrow margin.
3640: \let\nonarrowing=\comment
3641: \vbox\bgroup
3642: \baselineskip=0pt\parskip=0pt\lineskip=0pt
3643: \carttop
3644: \hbox\bgroup
3645: \hskip\lskip
3646: \vrule\kern3pt
3647: \vbox\bgroup
3648: \hsize=\cartinner
3649: \kern3pt
3650: \begingroup
3651: \baselineskip=\normbskip
3652: \lineskip=\normlskip
3653: \parskip=\normpskip
3654: \vskip -\parskip
3655: \def\Ecartouche{%
3656: \endgroup
3657: \kern3pt
3658: \egroup
3659: \kern3pt\vrule
3660: \hskip\rskip
3661: \egroup
3662: \cartbot
3663: \egroup
3664: \endgroup
3665: }}
3666:
3667:
3668: % This macro is called at the beginning of all the @example variants,
3669: % inside a group.
3670: \def\nonfillstart{%
3671: \aboveenvbreak
3672: \inENV % This group ends at the end of the body
3673: \hfuzz = 12pt % Don't be fussy
3674: \sepspaces % Make spaces be word-separators rather than space tokens.
3675: \singlespace
3676: \let\par = \lisppar % don't ignore blank lines
3677: \obeylines % each line of input is a line of output
3678: \parskip = 0pt
3679: \parindent = 0pt
3680: \emergencystretch = 0pt % don't try to avoid overfull boxes
3681: % @cartouche defines \nonarrowing to inhibit narrowing
3682: % at next level down.
3683: \ifx\nonarrowing\relax
3684: \advance \leftskip by \lispnarrowing
3685: \exdentamount=\lispnarrowing
3686: \let\exdent=\nofillexdent
3687: \let\nonarrowing=\relax
3688: \fi
3689: }
3690:
3691: % To ending an @example-like environment, we first end the paragraph
3692: % (via \afterenvbreak's vertical glue), and then the group. That way we
3693: % keep the zero \parskip that the environments set -- \parskip glue
3694: % will be inserted at the beginning of the next paragraph in the
3695: % document, after the environment.
3696: %
3697: \def\nonfillfinish{\afterenvbreak\endgroup}%
3698:
3699: \def\lisp{\begingroup
3700: \nonfillstart
3701: \let\Elisp = \nonfillfinish
3702: \tt
1.2 ! anton 3703: % Make @kbd do something special, if requested.
! 3704: \let\kbdfont\kbdexamplefont
1.1 anton 3705: \rawbackslash % have \ input char produce \ char from current font
3706: \gobble
3707: }
3708:
3709: % Define the \E... control sequence only if we are inside the
3710: % environment, so the error checking in \end will work.
3711: %
3712: % We must call \lisp last in the definition, since it reads the
3713: % return following the @example (or whatever) command.
3714: %
3715: \def\example{\begingroup \def\Eexample{\nonfillfinish\endgroup}\lisp}
3716: \def\smallexample{\begingroup \def\Esmallexample{\nonfillfinish\endgroup}\lisp}
3717: \def\smalllisp{\begingroup \def\Esmalllisp{\nonfillfinish\endgroup}\lisp}
3718:
3719: % @smallexample and @smalllisp. This is not used unless the @smallbook
3720: % command is given. Originally contributed by Pavel@xerox.
3721: %
3722: \def\smalllispx{\begingroup
3723: \nonfillstart
3724: \let\Esmalllisp = \nonfillfinish
3725: \let\Esmallexample = \nonfillfinish
3726: %
3727: % Smaller fonts for small examples.
3728: \indexfonts \tt
3729: \rawbackslash % make \ output the \ character from the current font (tt)
3730: \gobble
3731: }
3732:
3733: % This is @display; same as @lisp except use roman font.
3734: %
3735: \def\display{\begingroup
3736: \nonfillstart
3737: \let\Edisplay = \nonfillfinish
3738: \gobble
3739: }
3740:
3741: % This is @format; same as @display except don't narrow margins.
3742: %
3743: \def\format{\begingroup
3744: \let\nonarrowing = t
3745: \nonfillstart
3746: \let\Eformat = \nonfillfinish
3747: \gobble
3748: }
3749:
3750: % @flushleft (same as @format) and @flushright.
3751: %
3752: \def\flushleft{\begingroup
3753: \let\nonarrowing = t
3754: \nonfillstart
3755: \let\Eflushleft = \nonfillfinish
3756: \gobble
3757: }
3758: \def\flushright{\begingroup
3759: \let\nonarrowing = t
3760: \nonfillstart
3761: \let\Eflushright = \nonfillfinish
3762: \advance\leftskip by 0pt plus 1fill
3763: \gobble}
3764:
3765: % @quotation does normal linebreaking (hence we can't use \nonfillstart)
3766: % and narrows the margins.
3767: %
3768: \def\quotation{%
3769: \begingroup\inENV %This group ends at the end of the @quotation body
3770: {\parskip=0pt \aboveenvbreak}% because \aboveenvbreak inserts \parskip
3771: \singlespace
3772: \parindent=0pt
3773: % We have retained a nonzero parskip for the environment, since we're
3774: % doing normal filling. So to avoid extra space below the environment...
3775: \def\Equotation{\parskip = 0pt \nonfillfinish}%
3776: %
3777: % @cartouche defines \nonarrowing to inhibit narrowing at next level down.
3778: \ifx\nonarrowing\relax
3779: \advance\leftskip by \lispnarrowing
3780: \advance\rightskip by \lispnarrowing
3781: \exdentamount = \lispnarrowing
3782: \let\nonarrowing = \relax
3783: \fi
3784: }
3785:
3786: \message{defuns,}
3787: % Define formatter for defuns
3788: % First, allow user to change definition object font (\df) internally
3789: \def\setdeffont #1 {\csname DEF#1\endcsname}
3790:
3791: \newskip\defbodyindent \defbodyindent=.4in
3792: \newskip\defargsindent \defargsindent=50pt
3793: \newskip\deftypemargin \deftypemargin=12pt
3794: \newskip\deflastargmargin \deflastargmargin=18pt
3795:
3796: \newcount\parencount
3797: % define \functionparens, which makes ( and ) and & do special things.
3798: % \functionparens affects the group it is contained in.
3799: \def\activeparens{%
3800: \catcode`\(=\active \catcode`\)=\active \catcode`\&=\active
3801: \catcode`\[=\active \catcode`\]=\active}
3802:
3803: % Make control sequences which act like normal parenthesis chars.
3804: \let\lparen = ( \let\rparen = )
3805:
3806: {\activeparens % Now, smart parens don't turn on until &foo (see \amprm)
3807:
3808: % Be sure that we always have a definition for `(', etc. For example,
3809: % if the fn name has parens in it, \boldbrax will not be in effect yet,
3810: % so TeX would otherwise complain about undefined control sequence.
3811: \global\let(=\lparen \global\let)=\rparen
3812: \global\let[=\lbrack \global\let]=\rbrack
3813:
3814: \gdef\functionparens{\boldbrax\let&=\amprm\parencount=0 }
3815: \gdef\boldbrax{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb}
3816: % This is used to turn on special parens
3817: % but make & act ordinary (given that it's active).
3818: \gdef\boldbraxnoamp{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb\let&=\ampnr}
3819:
3820: % Definitions of (, ) and & used in args for functions.
3821: % This is the definition of ( outside of all parentheses.
1.2 ! anton 3822: \gdef\oprm#1 {{\rm\char`\(}#1 \bf \let(=\opnested
! 3823: \global\advance\parencount by 1
! 3824: }
1.1 anton 3825: %
3826: % This is the definition of ( when already inside a level of parens.
3827: \gdef\opnested{\char`\(\global\advance\parencount by 1 }
3828: %
3829: \gdef\clrm{% Print a paren in roman if it is taking us back to depth of 0.
1.2 ! anton 3830: % also in that case restore the outer-level definition of (.
! 3831: \ifnum \parencount=1 {\rm \char `\)}\sl \let(=\oprm \else \char `\) \fi
! 3832: \global\advance \parencount by -1 }
1.1 anton 3833: % If we encounter &foo, then turn on ()-hacking afterwards
3834: \gdef\amprm#1 {{\rm\}\let(=\oprm \let)=\clrm\ }
3835: %
3836: \gdef\normalparens{\boldbrax\let&=\ampnr}
3837: } % End of definition inside \activeparens
3838: %% These parens (in \boldbrax) actually are a little bolder than the
3839: %% contained text. This is especially needed for [ and ]
1.2 ! anton 3840: \def\opnr{{\sf\char`\(}\global\advance\parencount by 1 }
! 3841: \def\clnr{{\sf\char`\)}\global\advance\parencount by -1 }
! 3842: \def\ampnr{\&}
! 3843: \def\lbrb{{\bf\char`\[}}
! 3844: \def\rbrb{{\bf\char`\]}}
1.1 anton 3845:
3846: % First, defname, which formats the header line itself.
3847: % #1 should be the function name.
3848: % #2 should be the type of definition, such as "Function".
3849:
3850: \def\defname #1#2{%
3851: % Get the values of \leftskip and \rightskip as they were
3852: % outside the @def...
3853: \dimen2=\leftskip
3854: \advance\dimen2 by -\defbodyindent
3855: \dimen3=\rightskip
3856: \advance\dimen3 by -\defbodyindent
3857: \noindent %
3858: \setbox0=\hbox{\hskip \deflastargmargin{\rm #2}\hskip \deftypemargin}%
3859: \dimen0=\hsize \advance \dimen0 by -\wd0 % compute size for first line
3860: \dimen1=\hsize \advance \dimen1 by -\defargsindent %size for continuations
3861: \parshape 2 0in \dimen0 \defargsindent \dimen1 %
3862: % Now output arg 2 ("Function" or some such)
3863: % ending at \deftypemargin from the right margin,
3864: % but stuck inside a box of width 0 so it does not interfere with linebreaking
3865: {% Adjust \hsize to exclude the ambient margins,
3866: % so that \rightline will obey them.
3867: \advance \hsize by -\dimen2 \advance \hsize by -\dimen3
3868: \rlap{\rightline{{\rm #2}\hskip \deftypemargin}}}%
3869: % Make all lines underfull and no complaints:
3870: \tolerance=10000 \hbadness=10000
3871: \advance\leftskip by -\defbodyindent
3872: \exdentamount=\defbodyindent
3873: {\df #1}\enskip % Generate function name
3874: }
3875:
3876: % Actually process the body of a definition
3877: % #1 should be the terminating control sequence, such as \Edefun.
3878: % #2 should be the "another name" control sequence, such as \defunx.
3879: % #3 should be the control sequence that actually processes the header,
3880: % such as \defunheader.
3881:
3882: \def\defparsebody #1#2#3{\begingroup\inENV% Environment for definitionbody
3883: \medbreak %
3884: % Define the end token that this defining construct specifies
3885: % so that it will exit this group.
3886: \def#1{\endgraf\endgroup\medbreak}%
3887: \def#2{\begingroup\obeylines\activeparens\spacesplit#3}%
3888: \parindent=0in
3889: \advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent
3890: \exdentamount=\defbodyindent
3891: \begingroup %
3892: \catcode 61=\active % 61 is `='
3893: \obeylines\activeparens\spacesplit#3}
3894:
3895: \def\defmethparsebody #1#2#3#4 {\begingroup\inENV %
3896: \medbreak %
3897: % Define the end token that this defining construct specifies
3898: % so that it will exit this group.
3899: \def#1{\endgraf\endgroup\medbreak}%
3900: \def#2##1 {\begingroup\obeylines\activeparens\spacesplit{#3{##1}}}%
3901: \parindent=0in
3902: \advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent
3903: \exdentamount=\defbodyindent
3904: \begingroup\obeylines\activeparens\spacesplit{#3{#4}}}
3905:
3906: \def\defopparsebody #1#2#3#4#5 {\begingroup\inENV %
3907: \medbreak %
3908: % Define the end token that this defining construct specifies
3909: % so that it will exit this group.
3910: \def#1{\endgraf\endgroup\medbreak}%
3911: \def#2##1 ##2 {\def#4{##1}%
3912: \begingroup\obeylines\activeparens\spacesplit{#3{##2}}}%
3913: \parindent=0in
3914: \advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent
3915: \exdentamount=\defbodyindent
3916: \begingroup\obeylines\activeparens\spacesplit{#3{#5}}}
3917:
3918: % These parsing functions are similar to the preceding ones
3919: % except that they do not make parens into active characters.
3920: % These are used for "variables" since they have no arguments.
3921:
3922: \def\defvarparsebody #1#2#3{\begingroup\inENV% Environment for definitionbody
3923: \medbreak %
3924: % Define the end token that this defining construct specifies
3925: % so that it will exit this group.
3926: \def#1{\endgraf\endgroup\medbreak}%
3927: \def#2{\begingroup\obeylines\spacesplit#3}%
3928: \parindent=0in
3929: \advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent
3930: \exdentamount=\defbodyindent
3931: \begingroup %
3932: \catcode 61=\active %
3933: \obeylines\spacesplit#3}
3934:
3935: % This is used for \def{tp,vr}parsebody. It could probably be used for
3936: % some of the others, too, with some judicious conditionals.
1.2 ! anton 3937: %
1.1 anton 3938: \def\parsebodycommon#1#2#3{%
3939: \begingroup\inENV %
3940: \medbreak %
3941: % Define the end token that this defining construct specifies
3942: % so that it will exit this group.
3943: \def#1{\endgraf\endgroup\medbreak}%
3944: \def#2##1 {\begingroup\obeylines\spacesplit{#3{##1}}}%
3945: \parindent=0in
3946: \advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent
3947: \exdentamount=\defbodyindent
3948: \begingroup\obeylines
3949: }
3950:
3951: \def\defvrparsebody#1#2#3#4 {%
3952: \parsebodycommon{#1}{#2}{#3}%
3953: \spacesplit{#3{#4}}%
3954: }
3955:
3956: % This loses on `@deftp {Data Type} {struct termios}' -- it thinks the
3957: % type is just `struct', because we lose the braces in `{struct
3958: % termios}' when \spacesplit reads its undelimited argument. Sigh.
3959: % \let\deftpparsebody=\defvrparsebody
3960: %
3961: % So, to get around this, we put \empty in with the type name. That
3962: % way, TeX won't find exactly `{...}' as an undelimited argument, and
3963: % won't strip off the braces.
3964: %
3965: \def\deftpparsebody #1#2#3#4 {%
3966: \parsebodycommon{#1}{#2}{#3}%
3967: \spacesplit{\parsetpheaderline{#3{#4}}}\empty
3968: }
3969:
3970: % Fine, but then we have to eventually remove the \empty *and* the
1.2 ! anton 3971: % braces (if any). That's what this does.
! 3972: %
! 3973: \def\removeemptybraces\empty#1\relax{#1}
1.1 anton 3974:
3975: % After \spacesplit has done its work, this is called -- #1 is the final
3976: % thing to call, #2 the type name (which starts with \empty), and #3
3977: % (which might be empty) the arguments.
1.2 ! anton 3978: %
1.1 anton 3979: \def\parsetpheaderline#1#2#3{%
1.2 ! anton 3980: #1{\removeemptybraces#2\relax}{#3}%
1.1 anton 3981: }%
3982:
3983: \def\defopvarparsebody #1#2#3#4#5 {\begingroup\inENV %
3984: \medbreak %
3985: % Define the end token that this defining construct specifies
3986: % so that it will exit this group.
3987: \def#1{\endgraf\endgroup\medbreak}%
3988: \def#2##1 ##2 {\def#4{##1}%
3989: \begingroup\obeylines\spacesplit{#3{##2}}}%
3990: \parindent=0in
3991: \advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent
3992: \exdentamount=\defbodyindent
3993: \begingroup\obeylines\spacesplit{#3{#5}}}
3994:
3995: % Split up #2 at the first space token.
3996: % call #1 with two arguments:
3997: % the first is all of #2 before the space token,
3998: % the second is all of #2 after that space token.
3999: % If #2 contains no space token, all of it is passed as the first arg
4000: % and the second is passed as empty.
4001:
4002: {\obeylines
4003: \gdef\spacesplit#1#2^^M{\endgroup\spacesplitfoo{#1}#2 \relax\spacesplitfoo}%
4004: \long\gdef\spacesplitfoo#1#2 #3#4\spacesplitfoo{%
4005: \ifx\relax #3%
4006: #1{#2}{}\else #1{#2}{#3#4}\fi}}
4007:
4008: % So much for the things common to all kinds of definitions.
4009:
4010: % Define @defun.
4011:
4012: % First, define the processing that is wanted for arguments of \defun
4013: % Use this to expand the args and terminate the paragraph they make up
4014:
4015: \def\defunargs #1{\functionparens \sl
4016: % Expand, preventing hyphenation at `-' chars.
4017: % Note that groups don't affect changes in \hyphenchar.
4018: \hyphenchar\tensl=0
4019: #1%
4020: \hyphenchar\tensl=45
1.2 ! anton 4021: \ifnum\parencount=0 \else \errmessage{Unbalanced parentheses in @def}\fi%
1.1 anton 4022: \interlinepenalty=10000
4023: \advance\rightskip by 0pt plus 1fil
4024: \endgraf\penalty 10000\vskip -\parskip\penalty 10000%
4025: }
4026:
4027: \def\deftypefunargs #1{%
4028: % Expand, preventing hyphenation at `-' chars.
4029: % Note that groups don't affect changes in \hyphenchar.
4030: % Use \boldbraxnoamp, not \functionparens, so that & is not special.
4031: \boldbraxnoamp
4032: \tclose{#1}% avoid \code because of side effects on active chars
4033: \interlinepenalty=10000
4034: \advance\rightskip by 0pt plus 1fil
4035: \endgraf\penalty 10000\vskip -\parskip\penalty 10000%
4036: }
4037:
4038: % Do complete processing of one @defun or @defunx line already parsed.
4039:
4040: % @deffn Command forward-char nchars
4041:
4042: \def\deffn{\defmethparsebody\Edeffn\deffnx\deffnheader}
4043:
4044: \def\deffnheader #1#2#3{\doind {fn}{\code{#2}}%
4045: \begingroup\defname {#2}{#1}\defunargs{#3}\endgroup %
4046: \catcode 61=\other % Turn off change made in \defparsebody
4047: }
4048:
4049: % @defun == @deffn Function
4050:
4051: \def\defun{\defparsebody\Edefun\defunx\defunheader}
4052:
4053: \def\defunheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index
4054: \begingroup\defname {#1}{Function}%
4055: \defunargs {#2}\endgroup %
4056: \catcode 61=\other % Turn off change made in \defparsebody
4057: }
4058:
4059: % @deftypefun int foobar (int @var{foo}, float @var{bar})
4060:
4061: \def\deftypefun{\defparsebody\Edeftypefun\deftypefunx\deftypefunheader}
4062:
4063: % #1 is the data type. #2 is the name and args.
4064: \def\deftypefunheader #1#2{\deftypefunheaderx{#1}#2 \relax}
4065: % #1 is the data type, #2 the name, #3 the args.
4066: \def\deftypefunheaderx #1#2 #3\relax{%
4067: \doind {fn}{\code{#2}}% Make entry in function index
4068: \begingroup\defname {\defheaderxcond#1\relax$$$#2}{Function}%
4069: \deftypefunargs {#3}\endgroup %
4070: \catcode 61=\other % Turn off change made in \defparsebody
4071: }
4072:
4073: % @deftypefn {Library Function} int foobar (int @var{foo}, float @var{bar})
4074:
4075: \def\deftypefn{\defmethparsebody\Edeftypefn\deftypefnx\deftypefnheader}
4076:
4077: % \defheaderxcond#1\relax$$$
4078: % puts #1 in @code, followed by a space, but does nothing if #1 is null.
4079: \def\defheaderxcond#1#2$$${\ifx#1\relax\else\code{#1#2} \fi}
4080:
4081: % #1 is the classification. #2 is the data type. #3 is the name and args.
4082: \def\deftypefnheader #1#2#3{\deftypefnheaderx{#1}{#2}#3 \relax}
4083: % #1 is the classification, #2 the data type, #3 the name, #4 the args.
4084: \def\deftypefnheaderx #1#2#3 #4\relax{%
4085: \doind {fn}{\code{#3}}% Make entry in function index
4086: \begingroup
4087: \normalparens % notably, turn off `&' magic, which prevents
4088: % at least some C++ text from working
4089: \defname {\defheaderxcond#2\relax$$$#3}{#1}%
4090: \deftypefunargs {#4}\endgroup %
4091: \catcode 61=\other % Turn off change made in \defparsebody
4092: }
4093:
4094: % @defmac == @deffn Macro
4095:
4096: \def\defmac{\defparsebody\Edefmac\defmacx\defmacheader}
4097:
4098: \def\defmacheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index
4099: \begingroup\defname {#1}{Macro}%
4100: \defunargs {#2}\endgroup %
4101: \catcode 61=\other % Turn off change made in \defparsebody
4102: }
4103:
4104: % @defspec == @deffn Special Form
4105:
4106: \def\defspec{\defparsebody\Edefspec\defspecx\defspecheader}
4107:
4108: \def\defspecheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index
4109: \begingroup\defname {#1}{Special Form}%
4110: \defunargs {#2}\endgroup %
4111: \catcode 61=\other % Turn off change made in \defparsebody
4112: }
4113:
4114: % This definition is run if you use @defunx
4115: % anywhere other than immediately after a @defun or @defunx.
4116:
4117: \def\deffnx #1 {\errmessage{@deffnx in invalid context}}
4118: \def\defunx #1 {\errmessage{@defunx in invalid context}}
4119: \def\defmacx #1 {\errmessage{@defmacx in invalid context}}
4120: \def\defspecx #1 {\errmessage{@defspecx in invalid context}}
4121: \def\deftypefnx #1 {\errmessage{@deftypefnx in invalid context}}
1.2 ! anton 4122: \def\deftypemethodx #1 {\errmessage{@deftypemethodx in invalid context}}
1.1 anton 4123: \def\deftypeunx #1 {\errmessage{@deftypeunx in invalid context}}
4124:
4125: % @defmethod, and so on
4126:
4127: % @defop {Funny Method} foo-class frobnicate argument
4128:
4129: \def\defop #1 {\def\defoptype{#1}%
4130: \defopparsebody\Edefop\defopx\defopheader\defoptype}
4131:
4132: \def\defopheader #1#2#3{%
4133: \dosubind {fn}{\code{#2}}{on #1}% Make entry in function index
4134: \begingroup\defname {#2}{\defoptype{} on #1}%
4135: \defunargs {#3}\endgroup %
4136: }
4137:
1.2 ! anton 4138: % @deftypemethod foo-class return-type foo-method args
! 4139: %
! 4140: \def\deftypemethod{%
! 4141: \defmethparsebody\Edeftypemethod\deftypemethodx\deftypemethodheader}
! 4142: %
! 4143: % #1 is the class name, #2 the data type, #3 the method name, #4 the args.
! 4144: \def\deftypemethodheader#1#2#3#4{%
! 4145: \deftypefnheaderx{Method on #1}{#2}#3 #4\relax
! 4146: }
! 4147:
1.1 anton 4148: % @defmethod == @defop Method
4149:
4150: \def\defmethod{\defmethparsebody\Edefmethod\defmethodx\defmethodheader}
4151:
4152: \def\defmethodheader #1#2#3{%
4153: \dosubind {fn}{\code{#2}}{on #1}% entry in function index
4154: \begingroup\defname {#2}{Method on #1}%
4155: \defunargs {#3}\endgroup %
4156: }
4157:
4158: % @defcv {Class Option} foo-class foo-flag
4159:
4160: \def\defcv #1 {\def\defcvtype{#1}%
4161: \defopvarparsebody\Edefcv\defcvx\defcvarheader\defcvtype}
4162:
4163: \def\defcvarheader #1#2#3{%
4164: \dosubind {vr}{\code{#2}}{of #1}% Make entry in var index
4165: \begingroup\defname {#2}{\defcvtype{} of #1}%
4166: \defvarargs {#3}\endgroup %
4167: }
4168:
4169: % @defivar == @defcv {Instance Variable}
4170:
4171: \def\defivar{\defvrparsebody\Edefivar\defivarx\defivarheader}
4172:
4173: \def\defivarheader #1#2#3{%
4174: \dosubind {vr}{\code{#2}}{of #1}% Make entry in var index
4175: \begingroup\defname {#2}{Instance Variable of #1}%
4176: \defvarargs {#3}\endgroup %
4177: }
4178:
4179: % These definitions are run if you use @defmethodx, etc.,
4180: % anywhere other than immediately after a @defmethod, etc.
4181:
4182: \def\defopx #1 {\errmessage{@defopx in invalid context}}
4183: \def\defmethodx #1 {\errmessage{@defmethodx in invalid context}}
4184: \def\defcvx #1 {\errmessage{@defcvx in invalid context}}
4185: \def\defivarx #1 {\errmessage{@defivarx in invalid context}}
4186:
4187: % Now @defvar
4188:
4189: % First, define the processing that is wanted for arguments of @defvar.
4190: % This is actually simple: just print them in roman.
4191: % This must expand the args and terminate the paragraph they make up
4192: \def\defvarargs #1{\normalparens #1%
4193: \interlinepenalty=10000
4194: \endgraf\penalty 10000\vskip -\parskip\penalty 10000}
4195:
4196: % @defvr Counter foo-count
4197:
4198: \def\defvr{\defvrparsebody\Edefvr\defvrx\defvrheader}
4199:
4200: \def\defvrheader #1#2#3{\doind {vr}{\code{#2}}%
4201: \begingroup\defname {#2}{#1}\defvarargs{#3}\endgroup}
4202:
4203: % @defvar == @defvr Variable
4204:
4205: \def\defvar{\defvarparsebody\Edefvar\defvarx\defvarheader}
4206:
4207: \def\defvarheader #1#2{\doind {vr}{\code{#1}}% Make entry in var index
4208: \begingroup\defname {#1}{Variable}%
4209: \defvarargs {#2}\endgroup %
4210: }
4211:
4212: % @defopt == @defvr {User Option}
4213:
4214: \def\defopt{\defvarparsebody\Edefopt\defoptx\defoptheader}
4215:
4216: \def\defoptheader #1#2{\doind {vr}{\code{#1}}% Make entry in var index
4217: \begingroup\defname {#1}{User Option}%
4218: \defvarargs {#2}\endgroup %
4219: }
4220:
4221: % @deftypevar int foobar
4222:
4223: \def\deftypevar{\defvarparsebody\Edeftypevar\deftypevarx\deftypevarheader}
4224:
1.2 ! anton 4225: % #1 is the data type. #2 is the name, perhaps followed by text that
! 4226: % is actually part of the data type, which should not be put into the index.
1.1 anton 4227: \def\deftypevarheader #1#2{%
1.2 ! anton 4228: \dovarind#2 \relax% Make entry in variables index
1.1 anton 4229: \begingroup\defname {\defheaderxcond#1\relax$$$#2}{Variable}%
4230: \interlinepenalty=10000
4231: \endgraf\penalty 10000\vskip -\parskip\penalty 10000
4232: \endgroup}
1.2 ! anton 4233: \def\dovarind#1 #2\relax{\doind{vr}{\code{#1}}}
1.1 anton 4234:
4235: % @deftypevr {Global Flag} int enable
4236:
4237: \def\deftypevr{\defvrparsebody\Edeftypevr\deftypevrx\deftypevrheader}
4238:
1.2 ! anton 4239: \def\deftypevrheader #1#2#3{\dovarind#3 \relax%
1.1 anton 4240: \begingroup\defname {\defheaderxcond#2\relax$$$#3}{#1}
4241: \interlinepenalty=10000
4242: \endgraf\penalty 10000\vskip -\parskip\penalty 10000
4243: \endgroup}
4244:
4245: % This definition is run if you use @defvarx
4246: % anywhere other than immediately after a @defvar or @defvarx.
4247:
4248: \def\defvrx #1 {\errmessage{@defvrx in invalid context}}
4249: \def\defvarx #1 {\errmessage{@defvarx in invalid context}}
4250: \def\defoptx #1 {\errmessage{@defoptx in invalid context}}
4251: \def\deftypevarx #1 {\errmessage{@deftypevarx in invalid context}}
4252: \def\deftypevrx #1 {\errmessage{@deftypevrx in invalid context}}
4253:
4254: % Now define @deftp
4255: % Args are printed in bold, a slight difference from @defvar.
4256:
4257: \def\deftpargs #1{\bf \defvarargs{#1}}
4258:
4259: % @deftp Class window height width ...
4260:
4261: \def\deftp{\deftpparsebody\Edeftp\deftpx\deftpheader}
4262:
4263: \def\deftpheader #1#2#3{\doind {tp}{\code{#2}}%
4264: \begingroup\defname {#2}{#1}\deftpargs{#3}\endgroup}
4265:
4266: % This definition is run if you use @deftpx, etc
4267: % anywhere other than immediately after a @deftp, etc.
4268:
4269: \def\deftpx #1 {\errmessage{@deftpx in invalid context}}
4270:
4271:
4272: \message{cross reference,}
4273: % Define cross-reference macros
4274: \newwrite \auxfile
4275:
4276: \newif\ifhavexrefs % True if xref values are known.
4277: \newif\ifwarnedxrefs % True if we warned once that they aren't known.
4278:
4279: % @inforef is simple.
4280: \def\inforef #1{\inforefzzz #1,,,,**}
4281: \def\inforefzzz #1,#2,#3,#4**{\putwordSee{} \putwordInfo{} \putwordfile{} \file{\ignorespaces #3{}},
4282: node \samp{\ignorespaces#1{}}}
4283:
4284: % \setref{foo} defines a cross-reference point named foo.
4285:
4286: \def\setref#1{%
4287: \dosetq{#1-title}{Ytitle}%
4288: \dosetq{#1-pg}{Ypagenumber}%
4289: \dosetq{#1-snt}{Ysectionnumberandtype}}
4290:
4291: \def\unnumbsetref#1{%
4292: \dosetq{#1-title}{Ytitle}%
4293: \dosetq{#1-pg}{Ypagenumber}%
4294: \dosetq{#1-snt}{Ynothing}}
4295:
4296: \def\appendixsetref#1{%
4297: \dosetq{#1-title}{Ytitle}%
4298: \dosetq{#1-pg}{Ypagenumber}%
4299: \dosetq{#1-snt}{Yappendixletterandtype}}
4300:
4301: % \xref, \pxref, and \ref generate cross-references to specified points.
4302: % For \xrefX, #1 is the node name, #2 the name of the Info
4303: % cross-reference, #3 the printed node name, #4 the name of the Info
4304: % file, #5 the name of the printed manual. All but the node name can be
4305: % omitted.
4306: %
4307: \def\pxref#1{\putwordsee{} \xrefX[#1,,,,,,,]}
4308: \def\xref#1{\putwordSee{} \xrefX[#1,,,,,,,]}
4309: \def\ref#1{\xrefX[#1,,,,,,,]}
4310: \def\xrefX[#1,#2,#3,#4,#5,#6]{\begingroup
4311: \def\printedmanual{\ignorespaces #5}%
4312: \def\printednodename{\ignorespaces #3}%
4313: \setbox1=\hbox{\printedmanual}%
4314: \setbox0=\hbox{\printednodename}%
4315: \ifdim \wd0 = 0pt
4316: % No printed node name was explicitly given.
4317: \expandafter\ifx\csname SETxref-automatic-section-title\endcsname\relax
4318: % Use the node name inside the square brackets.
4319: \def\printednodename{\ignorespaces #1}%
4320: \else
4321: % Use the actual chapter/section title appear inside
4322: % the square brackets. Use the real section title if we have it.
4323: \ifdim \wd1>0pt%
4324: % It is in another manual, so we don't have it.
4325: \def\printednodename{\ignorespaces #1}%
4326: \else
4327: \ifhavexrefs
4328: % We know the real title if we have the xref values.
4329: \def\printednodename{\refx{#1-title}{}}%
4330: \else
4331: % Otherwise just copy the Info node name.
4332: \def\printednodename{\ignorespaces #1}%
4333: \fi%
4334: \fi
4335: \fi
4336: \fi
4337: %
4338: % If we use \unhbox0 and \unhbox1 to print the node names, TeX does not
4339: % insert empty discretionaries after hyphens, which means that it will
4340: % not find a line break at a hyphen in a node names. Since some manuals
4341: % are best written with fairly long node names, containing hyphens, this
4342: % is a loss. Therefore, we give the text of the node name again, so it
4343: % is as if TeX is seeing it for the first time.
4344: \ifdim \wd1 > 0pt
4345: \putwordsection{} ``\printednodename'' in \cite{\printedmanual}%
4346: \else
4347: % _ (for example) has to be the character _ for the purposes of the
4348: % control sequence corresponding to the node, but it has to expand
4349: % into the usual \leavevmode...\vrule stuff for purposes of
4350: % printing. So we \turnoffactive for the \refx-snt, back on for the
4351: % printing, back off for the \refx-pg.
4352: {\turnoffactive \refx{#1-snt}{}}%
4353: \space [\printednodename],\space
4354: \turnoffactive \putwordpage\tie\refx{#1-pg}{}%
4355: \fi
4356: \endgroup}
4357:
4358: % \dosetq is the interface for calls from other macros
4359:
4360: % Use \turnoffactive so that punctuation chars such as underscore
4361: % work in node names.
1.2 ! anton 4362: \def\dosetq #1#2{{\let\folio=0 \turnoffactive
1.1 anton 4363: \edef\next{\write\auxfile{\internalsetq {#1}{#2}}}%
4364: \next}}
4365:
4366: % \internalsetq {foo}{page} expands into
4367: % CHARACTERS 'xrdef {foo}{...expansion of \Ypage...}
4368: % When the aux file is read, ' is the escape character
4369:
4370: \def\internalsetq #1#2{'xrdef {#1}{\csname #2\endcsname}}
4371:
4372: % Things to be expanded by \internalsetq
4373:
4374: \def\Ypagenumber{\folio}
4375:
4376: \def\Ytitle{\thissection}
4377:
4378: \def\Ynothing{}
4379:
4380: \def\Ysectionnumberandtype{%
4381: \ifnum\secno=0 \putwordChapter\xreftie\the\chapno %
4382: \else \ifnum \subsecno=0 \putwordSection\xreftie\the\chapno.\the\secno %
4383: \else \ifnum \subsubsecno=0 %
4384: \putwordSection\xreftie\the\chapno.\the\secno.\the\subsecno %
4385: \else %
4386: \putwordSection\xreftie\the\chapno.\the\secno.\the\subsecno.\the\subsubsecno %
4387: \fi \fi \fi }
4388:
4389: \def\Yappendixletterandtype{%
4390: \ifnum\secno=0 \putwordAppendix\xreftie'char\the\appendixno{}%
4391: \else \ifnum \subsecno=0 \putwordSection\xreftie'char\the\appendixno.\the\secno %
4392: \else \ifnum \subsubsecno=0 %
4393: \putwordSection\xreftie'char\the\appendixno.\the\secno.\the\subsecno %
4394: \else %
4395: \putwordSection\xreftie'char\the\appendixno.\the\secno.\the\subsecno.\the\subsubsecno %
4396: \fi \fi \fi }
4397:
4398: \gdef\xreftie{'tie}
4399:
4400: % Use TeX 3.0's \inputlineno to get the line number, for better error
4401: % messages, but if we're using an old version of TeX, don't do anything.
4402: %
4403: \ifx\inputlineno\thisisundefined
4404: \let\linenumber = \empty % Non-3.0.
4405: \else
4406: \def\linenumber{\the\inputlineno:\space}
4407: \fi
4408:
4409: % Define \refx{NAME}{SUFFIX} to reference a cross-reference string named NAME.
4410: % If its value is nonempty, SUFFIX is output afterward.
4411:
4412: \def\refx#1#2{%
4413: \expandafter\ifx\csname X#1\endcsname\relax
4414: % If not defined, say something at least.
1.2 ! anton 4415: \angleleft un\-de\-fined\angleright
1.1 anton 4416: \ifhavexrefs
4417: \message{\linenumber Undefined cross reference `#1'.}%
4418: \else
4419: \ifwarnedxrefs\else
4420: \global\warnedxrefstrue
4421: \message{Cross reference values unknown; you must run TeX again.}%
4422: \fi
4423: \fi
4424: \else
4425: % It's defined, so just use it.
4426: \csname X#1\endcsname
4427: \fi
4428: #2% Output the suffix in any case.
4429: }
4430:
4431: % This is the macro invoked by entries in the aux file.
1.2 ! anton 4432: %
! 4433: \def\xrdef#1{\begingroup
! 4434: % Reenable \ as an escape while reading the second argument.
! 4435: \catcode`\\ = 0
! 4436: \afterassignment\endgroup
! 4437: \expandafter\gdef\csname X#1\endcsname
! 4438: }
1.1 anton 4439:
1.2 ! anton 4440: % Read the last existing aux file, if any. No error if none exists.
! 4441: \def\readauxfile{\begingroup
! 4442: \catcode`\^^@=\other
! 4443: \catcode`\^^A=\other
! 4444: \catcode`\^^B=\other
! 4445: \catcode`\^^C=\other
! 4446: \catcode`\^^D=\other
! 4447: \catcode`\^^E=\other
! 4448: \catcode`\^^F=\other
! 4449: \catcode`\^^G=\other
! 4450: \catcode`\^^H=\other
! 4451: \catcode`\^^K=\other
! 4452: \catcode`\^^L=\other
! 4453: \catcode`\^^N=\other
! 4454: \catcode`\^^P=\other
! 4455: \catcode`\^^Q=\other
! 4456: \catcode`\^^R=\other
! 4457: \catcode`\^^S=\other
! 4458: \catcode`\^^T=\other
! 4459: \catcode`\^^U=\other
! 4460: \catcode`\^^V=\other
! 4461: \catcode`\^^W=\other
! 4462: \catcode`\^^X=\other
! 4463: \catcode`\^^Z=\other
! 4464: \catcode`\^^[=\other
! 4465: \catcode`\^^\=\other
! 4466: \catcode`\^^]=\other
! 4467: \catcode`\^^^=\other
! 4468: \catcode`\^^_=\other
! 4469: \catcode`\@=\other
! 4470: \catcode`\^=\other
! 4471: % It was suggested to define this as 7, which would allow ^^e4 etc.
! 4472: % in xref tags, i.e., node names. But since ^^e4 notation isn't
! 4473: % supported in the main text, it doesn't seem desirable. Furthermore,
! 4474: % that is not enough: for node names that actually contain a ^
! 4475: % character, we would end up writing a line like this: 'xrdef {'hat
! 4476: % b-title}{'hat b} and \xrdef does a \csname...\endcsname on the first
! 4477: % argument, and \hat is not an expandable control sequence. It could
! 4478: % all be worked out, but why? Either we support ^^ or we don't.
! 4479: %
! 4480: % The other change necessary for this was to define \auxhat:
! 4481: % \def\auxhat{\def^{'hat }}% extra space so ok if followed by letter
! 4482: % and then to call \auxhat in \setq.
! 4483: %
! 4484: \catcode`\~=\other
! 4485: \catcode`\[=\other
! 4486: \catcode`\]=\other
! 4487: \catcode`\"=\other
! 4488: \catcode`\_=\other
! 4489: \catcode`\|=\other
! 4490: \catcode`\<=\other
! 4491: \catcode`\>=\other
! 4492: \catcode`\$=\other
! 4493: \catcode`\#=\other
! 4494: \catcode`\&=\other
! 4495: % `\+ does not work, so use 43.
! 4496: \catcode43=\other
! 4497: % Make the characters 128-255 be printing characters
! 4498: {%
! 4499: \count 1=128
! 4500: \def\loop{%
! 4501: \catcode\count 1=\other
! 4502: \advance\count 1 by 1
! 4503: \ifnum \count 1<256 \loop \fi
! 4504: }%
1.1 anton 4505: }%
1.2 ! anton 4506: % The aux file uses ' as the escape (for now).
! 4507: % Turn off \ as an escape so we do not lose on
! 4508: % entries which were dumped with control sequences in their names.
! 4509: % For example, 'xrdef {$\leq $-fun}{page ...} made by @defun ^^
! 4510: % Reference to such entries still does not work the way one would wish,
! 4511: % but at least they do not bomb out when the aux file is read in.
! 4512: \catcode`\{=1
! 4513: \catcode`\}=2
! 4514: \catcode`\%=\other
! 4515: \catcode`\'=0
! 4516: \catcode`\\=\other
! 4517: %
! 4518: \openin 1 \jobname.aux
! 4519: \ifeof 1 \else
! 4520: \closein 1
! 4521: \input \jobname.aux
! 4522: \global\havexrefstrue
! 4523: \global\warnedobstrue
! 4524: \fi
! 4525: % Open the new aux file. TeX will close it automatically at exit.
! 4526: \openout\auxfile=\jobname.aux
1.1 anton 4527: \endgroup}
4528:
4529:
4530: % Footnotes.
4531:
4532: \newcount \footnoteno
4533:
4534: % The trailing space in the following definition for supereject is
4535: % vital for proper filling; pages come out unaligned when you do a
4536: % pagealignmacro call if that space before the closing brace is
4537: % removed. (Generally, numeric constants should always be followed by a
4538: % space to prevent strange expansion errors.)
4539: \def\supereject{\par\penalty -20000\footnoteno =0 }
4540:
1.2 ! anton 4541: % @footnotestyle is meaningful for info output only.
1.1 anton 4542: \let\footnotestyle=\comment
4543:
4544: \let\ptexfootnote=\footnote
4545:
4546: {\catcode `\@=11
4547: %
4548: % Auto-number footnotes. Otherwise like plain.
4549: \gdef\footnote{%
4550: \global\advance\footnoteno by \@ne
4551: \edef\thisfootno{$^{\the\footnoteno}$}%
4552: %
4553: % In case the footnote comes at the end of a sentence, preserve the
4554: % extra spacing after we do the footnote number.
4555: \let\@sf\empty
4556: \ifhmode\edef\@sf{\spacefactor\the\spacefactor}\/\fi
4557: %
4558: % Remove inadvertent blank space before typesetting the footnote number.
4559: \unskip
4560: \thisfootno\@sf
4561: \footnotezzz
4562: }%
4563:
4564: % Don't bother with the trickery in plain.tex to not require the
4565: % footnote text as a parameter. Our footnotes don't need to be so general.
4566: %
1.2 ! anton 4567: % Oh yes, they do; otherwise, @ifset and anything else that uses
! 4568: % \parseargline fail inside footnotes because the tokens are fixed when
! 4569: % the footnote is read. --karl, 16nov96.
! 4570: %
! 4571: \long\gdef\footnotezzz{\insert\footins\bgroup
1.1 anton 4572: % We want to typeset this text as a normal paragraph, even if the
4573: % footnote reference occurs in (for example) a display environment.
4574: % So reset some parameters.
4575: \interlinepenalty\interfootnotelinepenalty
4576: \splittopskip\ht\strutbox % top baseline for broken footnotes
4577: \splitmaxdepth\dp\strutbox
4578: \floatingpenalty\@MM
4579: \leftskip\z@skip
4580: \rightskip\z@skip
4581: \spaceskip\z@skip
4582: \xspaceskip\z@skip
4583: \parindent\defaultparindent
4584: %
4585: % Hang the footnote text off the number.
4586: \hang
4587: \textindent{\thisfootno}%
4588: %
4589: % Don't crash into the line above the footnote text. Since this
4590: % expands into a box, it must come within the paragraph, lest it
4591: % provide a place where TeX can split the footnote.
4592: \footstrut
1.2 ! anton 4593: \futurelet\next\fo@t
1.1 anton 4594: }
1.2 ! anton 4595: \def\fo@t{\ifcat\bgroup\noexpand\next \let\next\f@@t
! 4596: \else\let\next\f@t\fi \next}
! 4597: \def\f@@t{\bgroup\aftergroup\@foot\let\next}
! 4598: \def\f@t#1{#1\@foot}
! 4599: \def\@foot{\strut\egroup}
1.1 anton 4600:
4601: }%end \catcode `\@=11
4602:
4603: % Set the baselineskip to #1, and the lineskip and strut size
4604: % correspondingly. There is no deep meaning behind these magic numbers
4605: % used as factors; they just match (closely enough) what Knuth defined.
4606: %
4607: \def\lineskipfactor{.08333}
4608: \def\strutheightpercent{.70833}
4609: \def\strutdepthpercent {.29167}
4610: %
4611: \def\setleading#1{%
4612: \normalbaselineskip = #1\relax
4613: \normallineskip = \lineskipfactor\normalbaselineskip
4614: \normalbaselines
4615: \setbox\strutbox =\hbox{%
4616: \vrule width0pt height\strutheightpercent\baselineskip
4617: depth \strutdepthpercent \baselineskip
4618: }%
4619: }
4620:
4621: % @| inserts a changebar to the left of the current line. It should
4622: % surround any changed text. This approach does *not* work if the
4623: % change spans more than two lines of output. To handle that, we would
4624: % have adopt a much more difficult approach (putting marks into the main
4625: % vertical list for the beginning and end of each change).
4626: %
4627: \def\|{%
4628: % \vadjust can only be used in horizontal mode.
4629: \leavevmode
4630: %
4631: % Append this vertical mode material after the current line in the output.
4632: \vadjust{%
4633: % We want to insert a rule with the height and depth of the current
4634: % leading; that is exactly what \strutbox is supposed to record.
4635: \vskip-\baselineskip
4636: %
4637: % \vadjust-items are inserted at the left edge of the type. So
4638: % the \llap here moves out into the left-hand margin.
4639: \llap{%
4640: %
4641: % For a thicker or thinner bar, change the `1pt'.
4642: \vrule height\baselineskip width1pt
4643: %
4644: % This is the space between the bar and the text.
4645: \hskip 12pt
4646: }%
4647: }%
4648: }
4649:
4650: % For a final copy, take out the rectangles
4651: % that mark overfull boxes (in case you have decided
4652: % that the text looks ok even though it passes the margin).
4653: %
4654: \def\finalout{\overfullrule=0pt}
4655:
1.2 ! anton 4656: % @image. We use the macros from epsf.tex to support this.
! 4657: % If epsf.tex is not installed and @image is used, we complain.
! 4658: %
! 4659: % Check for and read epsf.tex up front. If we read it only at @image
! 4660: % time, we might be inside a group, and then its definitions would get
! 4661: % undone and the next image would fail.
! 4662: \openin 1 = epsf.tex
! 4663: \ifeof 1 \else
! 4664: \closein 1
! 4665: \def\epsfannounce{\toks0 = }% do not bother showing banner
! 4666: \input epsf.tex
! 4667: \fi
! 4668: %
! 4669: \newif\ifwarnednoepsf
! 4670: \newhelp\noepsfhelp{epsf.tex must be installed for images to
! 4671: work. It is also included in the Texinfo distribution, or you can get
! 4672: it from ftp://ftp.tug.org/tex/epsf.tex.}
! 4673: %
! 4674: % Only complain once about lack of epsf.tex.
! 4675: \def\image#1{%
! 4676: \ifx\epsfbox\undefined
! 4677: \ifwarnednoepsf \else
! 4678: \errhelp = \noepsfhelp
! 4679: \errmessage{epsf.tex not found, images will be ignored}%
! 4680: \global\warnednoepsftrue
! 4681: \fi
! 4682: \else
! 4683: \imagexxx #1,,,\finish
! 4684: \fi
! 4685: }
! 4686: %
! 4687: % Arguments to @image:
! 4688: % #1 is (mandatory) image filename; we tack on .eps extension.
! 4689: % #2 is (optional) width, #3 is (optional) height.
! 4690: % #4 is just the usual extra ignored arg for parsing this stuff.
! 4691: \def\imagexxx#1,#2,#3,#4\finish{%
! 4692: % \epsfbox itself resets \epsf?size at each figure.
! 4693: \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \epsfxsize=#2\relax \fi
! 4694: \setbox0 = \hbox{\ignorespaces #3}\ifdim\wd0 > 0pt \epsfysize=#3\relax \fi
! 4695: \epsfbox{#1.eps}%
! 4696: }
1.1 anton 4697:
4698: % End of control word definitions.
4699:
1.2 ! anton 4700:
1.1 anton 4701: \message{and turning on texinfo input format.}
4702:
4703: \def\openindices{%
4704: \newindex{cp}%
4705: \newcodeindex{fn}%
4706: \newcodeindex{vr}%
4707: \newcodeindex{tp}%
4708: \newcodeindex{ky}%
4709: \newcodeindex{pg}%
4710: }
4711:
4712: % Set some numeric style parameters, for 8.5 x 11 format.
4713:
4714: \hsize = 6in
4715: \hoffset = .25in
4716: \newdimen\defaultparindent \defaultparindent = 15pt
4717: \parindent = \defaultparindent
4718: \parskip 3pt plus 2pt minus 1pt
4719: \setleading{13.2pt}
4720: \advance\topskip by 1.2cm
4721:
4722: \chapheadingskip = 15pt plus 4pt minus 2pt
4723: \secheadingskip = 12pt plus 3pt minus 2pt
4724: \subsecheadingskip = 9pt plus 2pt minus 2pt
4725:
4726: % Prevent underfull vbox error messages.
4727: \vbadness=10000
4728:
4729: % Following George Bush, just get rid of widows and orphans.
4730: \widowpenalty=10000
4731: \clubpenalty=10000
4732:
4733: % Use TeX 3.0's \emergencystretch to help line breaking, but if we're
4734: % using an old version of TeX, don't do anything. We want the amount of
4735: % stretch added to depend on the line length, hence the dependence on
4736: % \hsize. This makes it come to about 9pt for the 8.5x11 format.
4737: %
4738: \ifx\emergencystretch\thisisundefined
4739: % Allow us to assign to \emergencystretch anyway.
4740: \def\emergencystretch{\dimen0}%
4741: \else
4742: \emergencystretch = \hsize
4743: \divide\emergencystretch by 45
4744: \fi
4745:
4746: % Use @smallbook to reset parameters for 7x9.5 format (or else 7x9.25)
4747: \def\smallbook{
4748: \global\chapheadingskip = 15pt plus 4pt minus 2pt
4749: \global\secheadingskip = 12pt plus 3pt minus 2pt
4750: \global\subsecheadingskip = 9pt plus 2pt minus 2pt
4751: %
4752: \global\lispnarrowing = 0.3in
4753: \setleading{12pt}
4754: \advance\topskip by -1cm
4755: \global\parskip 2pt plus 1pt
4756: \global\hsize = 5in
4757: \global\vsize=7.5in
4758: \global\tolerance=700
4759: \global\hfuzz=1pt
4760: \global\contentsrightmargin=0pt
4761: \global\deftypemargin=0pt
4762: \global\defbodyindent=.5cm
4763: %
4764: \global\pagewidth=\hsize
4765: \global\pageheight=\vsize
4766: %
4767: \global\let\smalllisp=\smalllispx
4768: \global\let\smallexample=\smalllispx
4769: \global\def\Esmallexample{\Esmalllisp}
4770: }
4771:
4772: % Use @afourpaper to print on European A4 paper.
4773: \def\afourpaper{
4774: \global\tolerance=700
4775: \global\hfuzz=1pt
4776: \setleading{12pt}
4777: \global\parskip 15pt plus 1pt
4778:
4779: \global\vsize= 53\baselineskip
4780: \advance\vsize by \topskip
4781: %\global\hsize= 5.85in % A4 wide 10pt
4782: \global\hsize= 6.5in
4783: \global\outerhsize=\hsize
4784: \global\advance\outerhsize by 0.5in
4785: \global\outervsize=\vsize
4786: \global\advance\outervsize by 0.6in
4787:
4788: \global\pagewidth=\hsize
4789: \global\pageheight=\vsize
4790: }
4791:
4792: \bindingoffset=0pt
4793: \normaloffset=\hoffset
4794: \pagewidth=\hsize
4795: \pageheight=\vsize
4796:
4797: % Allow control of the text dimensions. Parameters in order: textheight;
4798: % textwidth; voffset; hoffset; binding offset; topskip.
4799: % All require a dimension;
4800: % header is additional; added length extends the bottom of the page.
4801:
4802: \def\changepagesizes#1#2#3#4#5#6{
4803: \global\vsize= #1
4804: \global\topskip= #6
4805: \advance\vsize by \topskip
4806: \global\voffset= #3
4807: \global\hsize= #2
4808: \global\outerhsize=\hsize
4809: \global\advance\outerhsize by 0.5in
4810: \global\outervsize=\vsize
4811: \global\advance\outervsize by 0.6in
4812: \global\pagewidth=\hsize
4813: \global\pageheight=\vsize
4814: \global\normaloffset= #4
4815: \global\bindingoffset= #5}
4816:
4817: % A specific text layout, 24x15cm overall, intended for A4 paper. Top margin
4818: % 29mm, hence bottom margin 28mm, nominal side margin 3cm.
4819: \def\afourlatex
4820: {\global\tolerance=700
4821: \global\hfuzz=1pt
4822: \setleading{12pt}
4823: \global\parskip 15pt plus 1pt
4824: \advance\baselineskip by 1.6pt
4825: \changepagesizes{237mm}{150mm}{3.6mm}{3.6mm}{3mm}{7mm}
4826: }
4827:
4828: % Use @afourwide to print on European A4 paper in wide format.
4829: \def\afourwide{\afourpaper
4830: \changepagesizes{9.5in}{6.5in}{\hoffset}{\normaloffset}{\bindingoffset}{7mm}}
4831:
4832: % Define macros to output various characters with catcode for normal text.
4833: \catcode`\"=\other
4834: \catcode`\~=\other
4835: \catcode`\^=\other
4836: \catcode`\_=\other
4837: \catcode`\|=\other
4838: \catcode`\<=\other
4839: \catcode`\>=\other
4840: \catcode`\+=\other
4841: \def\normaldoublequote{"}
4842: \def\normaltilde{~}
4843: \def\normalcaret{^}
4844: \def\normalunderscore{_}
4845: \def\normalverticalbar{|}
4846: \def\normalless{<}
4847: \def\normalgreater{>}
4848: \def\normalplus{+}
4849:
4850: % This macro is used to make a character print one way in ttfont
4851: % where it can probably just be output, and another way in other fonts,
4852: % where something hairier probably needs to be done.
4853: %
4854: % #1 is what to print if we are indeed using \tt; #2 is what to print
4855: % otherwise. Since all the Computer Modern typewriter fonts have zero
4856: % interword stretch (and shrink), and it is reasonable to expect all
4857: % typewriter fonts to have this, we can check that font parameter.
4858: %
4859: \def\ifusingtt#1#2{\ifdim \fontdimen3\the\font=0pt #1\else #2\fi}
4860:
4861: % Turn off all special characters except @
4862: % (and those which the user can use as if they were ordinary).
4863: % Most of these we simply print from the \tt font, but for some, we can
4864: % use math or other variants that look better in normal text.
4865:
4866: \catcode`\"=\active
4867: \def\activedoublequote{{\tt \char '042}}
4868: \let"=\activedoublequote
4869: \catcode`\~=\active
4870: \def~{{\tt \char '176}}
4871: \chardef\hat=`\^
4872: \catcode`\^=\active
4873: \def^{{\tt \hat}}
4874:
4875: \catcode`\_=\active
4876: \def_{\ifusingtt\normalunderscore\_}
4877: % Subroutine for the previous macro.
4878: \def\_{\leavevmode \kern.06em \vbox{\hrule width.3em height.1ex}}
4879:
4880: \catcode`\|=\active
4881: \def|{{\tt \char '174}}
4882: \chardef \less=`\<
4883: \catcode`\<=\active
4884: \def<{{\tt \less}}
4885: \chardef \gtr=`\>
4886: \catcode`\>=\active
4887: \def>{{\tt \gtr}}
4888: \catcode`\+=\active
4889: \def+{{\tt \char 43}}
4890: %\catcode 27=\active
4891: %\def^^[{$\diamondsuit$}
4892:
4893: % Set up an active definition for =, but don't enable it most of the time.
4894: {\catcode`\==\active
4895: \global\def={{\tt \char 61}}}
4896:
4897: \catcode`+=\active
4898: \catcode`\_=\active
4899:
4900: % If a .fmt file is being used, characters that might appear in a file
4901: % name cannot be active until we have parsed the command line.
4902: % So turn them off again, and have \everyjob (or @setfilename) turn them on.
4903: % \otherifyactive is called near the end of this file.
4904: \def\otherifyactive{\catcode`+=\other \catcode`\_=\other}
4905:
4906: \catcode`\@=0
4907:
4908: % \rawbackslashxx output one backslash character in current font
4909: \global\chardef\rawbackslashxx=`\\
4910: %{\catcode`\\=\other
4911: %@gdef@rawbackslashxx{\}}
4912:
4913: % \rawbackslash redefines \ as input to do \rawbackslashxx.
4914: {\catcode`\\=\active
4915: @gdef@rawbackslash{@let\=@rawbackslashxx }}
4916:
4917: % \normalbackslash outputs one backslash in fixed width font.
4918: \def\normalbackslash{{\tt\rawbackslashxx}}
4919:
4920: % Say @foo, not \foo, in error messages.
4921: \escapechar=`\@
4922:
4923: % \catcode 17=0 % Define control-q
4924: \catcode`\\=\active
4925:
4926: % Used sometimes to turn off (effectively) the active characters
4927: % even after parsing them.
4928: @def@turnoffactive{@let"=@normaldoublequote
4929: @let\=@realbackslash
4930: @let~=@normaltilde
4931: @let^=@normalcaret
4932: @let_=@normalunderscore
4933: @let|=@normalverticalbar
4934: @let<=@normalless
4935: @let>=@normalgreater
4936: @let+=@normalplus}
4937:
4938: @def@normalturnoffactive{@let"=@normaldoublequote
4939: @let\=@normalbackslash
4940: @let~=@normaltilde
4941: @let^=@normalcaret
4942: @let_=@normalunderscore
4943: @let|=@normalverticalbar
4944: @let<=@normalless
4945: @let>=@normalgreater
4946: @let+=@normalplus}
4947:
4948: % Make _ and + \other characters, temporarily.
4949: % This is canceled by @fixbackslash.
4950: @otherifyactive
4951:
4952: % If a .fmt file is being used, we don't want the `\input texinfo' to show up.
4953: % That is what \eatinput is for; after that, the `\' should revert to printing
4954: % a backslash.
4955: %
4956: @gdef@eatinput input texinfo{@fixbackslash}
4957: @global@let\ = @eatinput
4958:
4959: % On the other hand, perhaps the file did not have a `\input texinfo'. Then
4960: % the first `\{ in the file would cause an error. This macro tries to fix
4961: % that, assuming it is called before the first `\' could plausibly occur.
4962: % Also back turn on active characters that might appear in the input
4963: % file name, in case not using a pre-dumped format.
4964: %
4965: @gdef@fixbackslash{@ifx\@eatinput @let\ = @normalbackslash @fi
4966: @catcode`+=@active @catcode`@_=@active}
4967:
4968: %% These look ok in all fonts, so just make them not special. The @rm below
4969: %% makes sure that the current font starts out as the newly loaded cmr10
4970: @catcode`@$=@other @catcode`@%=@other @catcode`@&=@other @catcode`@#=@other
4971:
4972: @textfonts
4973: @rm
4974:
4975: @c Local variables:
4976: @c page-delimiter: "^\\\\message"
4977: @c End:
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/cvsweb/icons/back.gif){kind=icon}
Return to texinfo.tex CVS log ![[TXT]](/cvsweb/icons/text.gif){kind=icon}
![[DIR]](/cvsweb/icons/dir.gif){kind=icon}
Up to [gforth] / gforth / doc