1: #Makefile for Gforth
2:
3: #Copyright (C) 1995, 1996 Free Software Foundation, Inc.
4:
5: #This file is part of Gforth.
6:
7: #Gforth is free software; you can redistribute it and/or
8: #modify it under the terms of the GNU General Public License
9: #as published by the Free Software Foundation; either version 2
10: #of the License, or (at your option) any later version.
11:
12: #This program is distributed in the hope that it will be useful,
13: #but WITHOUT ANY WARRANTY; without even the implied warranty of
14: #MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.#See the
15: #GNU General Public License for more details.
16:
17: #You should have received a copy of the GNU General Public License
18: #along with this program; if not, write to the Free Software
19: #Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
20:
21: # To change the values of `make' variables: instead of editing Makefiles,
22: # (1) if the variable is set in `config.status', edit `config.status'
23: # (which will cause the Makefiles to be regenerated when you run `make');
24: # (2) otherwise, pass the desired values on the `make' command line.
25:
26: VERSION =0.2.0#gforth version
27: SHELL = /bin/sh
28: RM = rm
29: CP = cp
30: INSTALL = @INSTALL@
31: INSTALL_PROGRAM = @INSTALL_PROGRAM@
32: INSTALL_DATA = @INSTALL_DATA@
33: INSTALL_DIR = $(srcdir)/install-sh -d
34: LN_S = @LN_S@
35: GCC = @CC@
36: CC = $(GCC)
37: PATHSEP = @PATHSEP@
38: FORTHPATH = $(libdir)/gforth/site-forth$(PATHSEP)$(datadir)/gforth/site-forth$(PATHSEP)$(libdir)/gforth/$(VERSION)$(PATHSEP)$(datadir)/gforth/$(VERSION)$(PATHSEP).
39: FORTHSIZES = @FORTHSIZES@
40: FORTH = ./gforth -p $(FORTHPATH)$(PATHSEP)$(srcdir)
41: FORTHK = ./gforth -p .$(PATHSEP)$(srcdir) -i ./kernel.fi
42: FORTHP = ./gforth -i ./kernel.fi
43: STRIP = strip
44: TEXI2DVI = texi2dvi
45: DVI2PS = dvips -D300
46: #you can get texi2html from http://asis01.cern.ch/infohtml/texi2html.html
47: TEXI2HTML = texi2html
48: MAKEINFO = makeinfo
49: XCFLAGS = @CFLAGS@
50: XDEFINES = @DEFS@
51: SWITCHES = $(XCFLAGS) $(XDEFINES) #-DNDEBUG #turn off assertions
52: ENGINE_FLAGS = @ENGINE_FLAGS@ -fno-defer-pop -fcaller-saves
53: DEBUGFLAG = @DEBUGFLAG@
54: CFLAGS = $(DEBUGFLAG) -I. -I$(srcdir) -O4 -Wall $(SWITCHES) -DDEFAULTPATH=\"$(FORTHPATH)\"
55:
56: #John Wavrik should use -Xlinker -N to get a writable text (executable)
57: XLDFLAGS = @LDFLAGS@
58: GCCLDFLAGS = @GCCLDFLAGS@
59: LDFLAGS = $(DEBUGFLAG) $(XLDFLAGS) $(GCCLDFLAGS)
60: LDLIBS = @LIBS@
61:
62: VPATH = @srcdir@
63: prefix = @prefix@
64: exec_prefix = @exec_prefix@
65: srcdir = @srcdir@
66: bindir = $(exec_prefix)/bin
67: #read-only architecture-independent files
68: datadir = $(prefix)/share
69: #read-only architecture-dependent non-ascii files
70: libdir = $(prefix)/lib
71: infodir = $(prefix)/info
72: mandir = $(prefix)/man
73: man1dir= $(mandir)/man1
74: man1ext= .1
75: #older emacses have their site-lisp in $(libdir)/emacs/
76: emacssitelispdir=$(datadir)/emacs/site-lisp
77:
78: INCLUDES = forth.h threading.h io.h
79:
80: KERN_SRC = \
81: add.fs \
82: aliases.fs \
83: cross.fs \
84: errore.fs \
85: extend.fs \
86: kernel.fs \
87: main.fs \
88: search-order.fs \
89: special.fs \
90: tools.fs \
91: toolsext.fs \
92: vars.fs
93:
94: GFORTH_FI_SRC = \
95: assert.fs \
96: blockedit.fb \
97: blocks.fs \
98: bufio.fs \
99: debug.fs \
100: debugging.fs \
101: dumpimage.fs \
102: environ.fs \
103: float.fs \
104: glocals.fs \
105: hash.fs \
106: history.fs \
107: intcomp.fs \
108: look.fs \
109: search-order.fs \
110: see.fs \
111: source.fs \
112: startup.fs \
113: struct.fs \
114: stuff.fs \
115: tasker.fs \
116: termsize.fs \
117: vt100.fs \
118: vt100key.fs \
119: wordinfo.fs
120:
121: FORTH_SRC = $(KERN_SRC) $(GFORTH_FI_SRC) \
122: ansi.fs answords.fs \
123: checkans.fs \
124: code.fs colorize.fs \
125: doskey.fs ds2texi.fs \
126: etags.fs filedump.fs \
127: glosgen.fs gray.fs \
128: makedoc.fs \
129: mach16b.fs mach16l.fs mach32b.fs mach32l.fs mach64b.fs mach64l.fs \
130: more.fs other.fs prims2x.fs random.fs \
131: sieve.fs \
132: site-init.fs \
133: tt.fs sokoban.fs \
134: wordsets.fs \
135: tester.fs coretest.fs postponetest.fs dbltest.fs \
136: bubble.fs siev.fs matrix.fs fib.fs \
137: oof.fs oofsampl.fs
138:
139: SOURCES = CVS compat Makefile.in configure.in configure config.sub config.guess \
140: acconfig.h config.h.in stamp-h.in \
141: install-sh INSTALL README ToDo BUGS model COPYING Benchres \
142: gforth.ds texinfo.tex gforth.1 gforth.el \
143: primitives engine.c main.c io.c memcasecmp.c \
144: m68k.h mips.h 386.h hppa.h cache.c sparc.h power.h alpha.h 32bit.h \
145: getopt.c getopt1.c getopt.h select.c \
146: ecvt.c memcmp.c strtol.c strtoul.c ansidecl.h memmove.c pow10.c atanh.c \
147: strerror.c strsignal.c dblsub.c \
148: INSTALL.DOS makefile.dos mkdosmf.sed configure.bat dosconf.h \
149: startup.dos history.dos \
150: os2conf.h makefile.os2 \
151: glosgen.glo glossaries.doc \
152: $(INCLUDES) $(FORTH_SRC)
153:
154: RCS_FILES = ToDo model high-level
155:
156: GEN = gforth version.fs
157:
158: OBJECTS = engine.o io.o main.o memcasecmp.o @LIBOBJS@ @getopt_long@
159:
160: # things that need a working forth system to be generated
161: FORTH_GEN0 = primitives.b primitives.i prim_labels.i aliases.fs
162: FORTH_GEN = $(FORTH_GEN0) @KERNEL@ gforth.fi
163: # this is used for antidependences,
164: FORTH_GEN1 = $(FORTH_GEN0) @kernel_fi@
165:
166: #distributed documentation
167: DOCDIST = gforth.info* gforth.ps
168:
169: #stuff in a binonly distribution
170: BINONLYDIST = config.status Makefile gforth $(OBJECTS) \
171: machine.h config.h kernel.fi stamp-h version.h version.fs \
172: INSTALL.BINDIST
173:
174: KERNLS = kernl16b.fi- kernl16l.fi- \
175: kernl32b.fi- kernl32l.fi- \
176: kernl64b.fi- kernl64l.fi-
177:
178: GEN_PRECIOUS = $(FORTH_GEN) $(KERNLS) gforth.texi gforth.dvi gforth.ps Makefile configure
179:
180: #standards.info recommends this:
181: .SUFFIXES:
182: .SUFFIXES: .c .o
183:
184: all: version.fs more
185:
186: version.h: Makefile.in
187: echo "static char gforth_version[]=\"$(VERSION)\" ;" >$@
188:
189: version.fs: Makefile.in
190: $(MAKE) gforth
191: echo ": version-string s\" $(VERSION)\" ;" >$@
192:
193: more: $(FORTH_GEN) gforth
194:
195: #from the gcc Makefile:
196: #"Deletion of files made during compilation.
197: # There are four levels of this:
198: # `mostlyclean', `clean', `distclean' and `realclean'.
199: # `mostlyclean' is useful while working on a particular type of machine.
200: # It deletes most, but not all, of the files made by compilation.
201: # It does not delete libgcc.a or its parts, so it won't have to be recompiled.
202: # `clean' deletes everything made by running `make all'.
203: # `distclean' also deletes the files made by config.
204: # `realclean' also deletes everything that could be regenerated automatically."
205:
206: mostlyclean:
207: -$(RM) -rf *.s gforth.fi *.fi~ *.fi- version.fs *TAGS \
208: crossdoc.fd doc.fd gforth.texi gforth.fns gforth.aux gforth.cp gforth.cps \
209: gforth.dvi gforth.fn gforth.ky gforth.log gforth.pg \
210: gforth.toc gforth.tp gforth.vr html gforth-$(VERSION).tar.gz \
211: version.h
212:
213: clean: mostlyclean
214: -$(RM) -rf $(GEN) *.o
215:
216: distclean: clean
217: -$(RM) machine.h kernel.fi config.cache config.log \
218: config.status config.h Makefile stamp-h
219:
220: #realclean is useless, but dangerous, so it's commented out
221: #realclean: distclean
222: # -$(RM) $(GEN_PRECIOUS)
223:
224: #mostlyclean, but also remove some of the stuff that is distributed
225: virtualclean: mostlyclean
226: -$(RM) -rf gforth.fns gforth.texi gforth.ps gforth.info* \
227: gforth-$(VERSION).tar.gz config.cache *~ */*~
228:
229: #use dist targets only when srcdir=.
230: dist: $(SOURCES) $(FORTH_GEN0) @KERNEL@ $(DOCDIST)
231: -rm -rf gforth-$(VERSION)
232: mkdir gforth-$(VERSION)
233: $(CP) -rp $(SOURCES) $(FORTH_GEN0) @KERNEL@ $(DOCDIST) gforth-$(VERSION)
234: tar cvf - gforth-$(VERSION)|gzip -9 >gforth-$(VERSION).tar.gz
235: -rm -rf gforth-$(VERSION)
236:
237: #A source distribution contains only the things needed to install gforth,
238: #without the documents.
239: srcdist: $(SOURCES) $(FORTH_GEN0) @KERNEL@
240: -rm -rf gforth-$(VERSION)
241: mkdir gforth-$(VERSION)
242: $(CP) -rp $(SOURCES) $(FORTH_GEN0) @KERNEL@ gforth-$(VERSION)
243: tar cvf - gforth-$(VERSION)|gzip -9 >gforth-src-$(VERSION).tar.gz
244: -rm -rf gforth-$(VERSION)
245:
246: #A document distribution contains only the documents, which can be created
247: #with MAKE.
248: docdist: $(DOCDIST)
249: -rm -rf gforth-$(VERSION)
250: mkdir gforth-$(VERSION)
251: $(CP) -rp $(DOCDIST) gforth-$(VERSION)
252: tar cvf - gforth-$(VERSION)|gzip -9 >gforth-doc-$(VERSION).tar.gz
253: -rm -rf gforth-$(VERSION)
254:
255: #a binary distribution contains the complete source distribution,
256: # the objects, the executable and the links. the objects are there for making
257: # make happy.
258: bindist: $(SOURCES) $(FORTH_GEN0) @KERNEL@ $(DOCDIST) $(BINONLYDIST)
259: -rm -rf gforth-$(VERSION)
260: mkdir gforth-$(VERSION)
261: $(CP) -rp -d $(SOURCES) $(FORTH_GEN0) @KERNEL@ $(DOCDIST) $(BINONLYDIST) gforth-$(VERSION)
262: strip gforth-$(VERSION)/gforth
263: tar cvf - gforth-$(VERSION)|gzip -9 >gforth-$(VERSION)-@host@.tar.gz
264:
265: #makes a package with only the stuff not present in the source
266: #package. For installation the source package is still needed!
267: #This is useful if you want to distribute many binary versions in
268: #little space (e.g., on floppy disk): Put the source package and
269: #all the binonly packages you are interested in on the disk. The user
270: #then just has to unpack the source and his favourite binonly into the
271: #same directory and has a full binary distribution.
272: binonlydist: $(SOURCES) $(FORTH_GEN0) @KERNEL@ $(DOCDIST) $(BINONLYDIST)
273: -rm -rf gforth-$(VERSION)
274: mkdir gforth-$(VERSION)
275: $(CP) -p -d $(BINONLYDIST) gforth-$(VERSION)
276: strip gforth-$(VERSION)/gforth
277: tar cvf - gforth-$(VERSION)|gzip -9 >gforth-$(VERSION)-binonly-@host@.tar.gz
278:
279:
280: #strip gforth, because the debugging stuff is hardly useful once
281: # gforth manages to execute more than a few primitives
282:
283: #install does not depend on gforth.info, because that would require
284: #supplying a lot of files that can be easily generated (only info is
285: #hard to generate)
286: install: gforth $(FORTH_SRC) kernel.fi gforth.fi gforth.1 primitives gforth.TAGS
287: for i in $(bindir) $(mandir) $(infodir) $(libdir)/gforth/$(VERSION) $(datadir)/gforth/$(VERSION) $(libdir)/gforth/site-forth $(datadir)/gforth/site-forth; do \
288: $(INSTALL_DIR) $$i; \
289: done
290: touch $(datadir)/gforth/site-forth/site-init.fs
291: -$(RM) $(bindir)/gforth $(bindir)/gforth-$(VERSION)
292: $(INSTALL_PROGRAM) -s gforth $(bindir)
293: ln $(bindir)/gforth $(bindir)/gforth-$(VERSION)
294: $(INSTALL_DATA) $(srcdir)/gforth.1 $(mandir)
295: for i in $(srcdir)/gforth.info*; do $(INSTALL_DATA) $$i $(infodir); done
296: for i in $(FORTH_SRC) primitives; do \
297: $(INSTALL_DATA) $(srcdir)/$$i $(datadir)/gforth/$(VERSION); \
298: done
299: $(INSTALL_DATA) kernel.fi $(libdir)/gforth/$(VERSION)
300: $(FORTHP) $(FORTHSIZES) startup.fs -e "savesystem $(libdir)/gforth/$(VERSION)/gforth.fi bye" #gforth.fi contains some path names
301: sed s:$(srcdir)/:$(datadir)/gforth/$(VERSION)/: gforth.TAGS >TAGS; $(INSTALL_DATA) TAGS $(datadir)/gforth/$(VERSION)
302: if test -d $(emacssitelispdir); then \
303: $(INSTALL_DATA) $(srcdir)/gforth.el $(emacssitelispdir); \
304: else \
305: echo ">>>>>Please install $(srcdir)/gforth.el in your .../emacs/site-lisp directory"; \
306: fi
307: echo ">>>>> Please make an entry for Gforth in your info dir file; e.g.:"; \
308: echo "* Gforth: (gforth). A fast interpreter for the Forth language."
309:
310: install-strip: install
311:
312: #deinstall all files specific to this version of gforth
313: #to uninstall version foo, type `make uninstall VERSION=foo'
314: uninstall:
315: -$(RM) -rf $(libdir)/gforth/$(VERSION) $(datadir)/gforth/$(VERSION) $(bindir)/gforth-$(VERSION)
316: @echo -e "Type\n$(RM) -rf $(bindir)/gforth $(mandir)/gforth.1 $(infodir)/gforth.info* $(datadir)/gforth $(libdir)/gforth\nto remove Gforth completely"
317:
318: check test: gforth gforth.fi
319: $(FORTH) tester.fs coretest.fs postponetest.fs dbltest.fs -e bye
320: $(FORTH) code.fs checkans.fs -e bye
321: @echo 'Expect no differences'
322: $(FORTH) prims2x.fs -e "s\" $(srcdir)/primitives.b\" ' output-c process-file bye"| diff -c - $(srcdir)/primitives.i
323:
324: bench: gforth gforth.fi
325: @echo 'Each benchmark takes about 30s on a 486-66 (gcc-2.6.3 -DFORCE_REG)'
326: time $(FORTH) siev.fs -e "main bye"
327: time $(FORTH) bubble.fs -e "main bye"
328: time $(FORTH) -m 160000 matrix.fs -e "main bye"
329: time $(FORTH) fib.fs -e "main bye"
330:
331: dvi: gforth.dvi
332:
333: gforth: $(OBJECTS)
334: -$(CP) gforth gforth~
335: $(GCC) $(LDFLAGS) $(OBJECTS) $(LDLIBS) -o $@
336: @MAKE_EXE@
337:
338: kernl16l.fi-: $(KERN_SRC) version.fs mach16l.fs $(FORTH_GEN0)
339: $(FORTHK) -e 's" mach16l.fs"' main.fs -e "save-cross kernl16l.fi- $(bindir)/gforth-$(VERSION) bye"
340:
341: kernl16b.fi-: $(KERN_SRC) version.fs mach16b.fs $(FORTH_GEN0)
342: $(FORTHK) -e 's" mach16b.fs"' main.fs -e "save-cross kernl16b.fi- $(bindir)/gforth-$(VERSION) bye"
343:
344: kernl32l.fi-: $(KERN_SRC) version.fs mach32l.fs $(FORTH_GEN0)
345: $(FORTHK) -e 's" mach32l.fs"' main.fs -e "save-cross kernl32l.fi- $(bindir)/gforth-$(VERSION) bye"
346:
347: kernl32b.fi-: $(KERN_SRC) version.fs mach32b.fs $(FORTH_GEN0)
348: $(FORTHK) -e 's" mach32b.fs"' main.fs -e "save-cross kernl32b.fi- $(bindir)/gforth-$(VERSION) bye"
349:
350: kernl64l.fi-: $(KERN_SRC) version.fs mach64l.fs $(FORTH_GEN0)
351: $(FORTHK) -e 's" mach64l.fs"' main.fs -e "save-cross kernl64l.fi- $(bindir)/gforth-$(VERSION) bye"
352:
353: kernl64b.fi-: $(KERN_SRC) version.fs mach64b.fs $(FORTH_GEN0)
354: $(FORTHK) -e 's" mach64b.fs"' main.fs -e "save-cross kernl64b.fi- $(bindir)/gforth-$(VERSION) bye"
355:
356: kernl16b.fi: $(KERNLS)
357: -$(CP) kernl16b.fi kernl16b.fi~
358: -$(CP) kernl16b.fi- kernl16b.fi
359: @LINK_KERNL16B@
360:
361: kernl16l.fi: $(KERNLS)
362: -$(CP) kernl16l.fi kernl16l.fi~
363: -$(CP) kernl16l.fi- kernl16l.fi
364: @LINK_KERNL16L@
365:
366: kernl32b.fi: $(KERNLS)
367: -$(CP) kernl32b.fi kernl32b.fi~
368: -$(CP) kernl32b.fi- kernl32b.fi
369: @LINK_KERNL32B@
370:
371: kernl32l.fi: $(KERNLS)
372: -$(CP) kernl32l.fi kernl32l.fi~
373: -$(CP) kernl32l.fi- kernl32l.fi
374: @LINK_KERNL32L@
375:
376: kernl64b.fi: $(KERNLS)
377: -$(CP) kernl64b.fi kernl64b.fi~
378: -$(CP) kernl64b.fi- kernl64b.fi
379: @LINK_KERNL64B@
380:
381: kernl64l.fi: $(KERNLS)
382: -$(CP) kernl64l.fi kernl64l.fi~
383: -$(CP) kernl64l.fi- kernl64l.fi
384: @LINK_KERNL64L@
385:
386: gforth.fi: @kernel_fi@ gforth $(GFORTH_FI_SRC)
387: $(FORTHK) $(FORTHSIZES) startup.fs -e "savesystem gforth.fi bye"
388:
389: #TAGS is a GNU standard target
390: TAGS: gforth.TAGS
391: $(CP) gforth.TAGS $@
392:
393: gforth.TAGS: @kernel_fi@ gforth $(GFORTH_FI_SRC) primitives.TAGS
394: $(FORTHK) etags.fs startup.fs -e bye
395: cat TAGS primitives.TAGS kernel.TAGS >gforth.TAGS
396: rm TAGS
397:
398: engine.s: engine.c primitives.i prim_labels.i machine.h threading.h $(INCLUDES) config.h
399: $(GCC) $(CFLAGS) $(ENGINE_FLAGS) -S $(srcdir)/engine.c
400:
401: engine.o: engine.c primitives.i prim_labels.i machine.h threading.h $(INCLUDES) config.h
402: $(GCC) $(CFLAGS) $(ENGINE_FLAGS) -c $(srcdir)/engine.c
403:
404: main.o: main.c machine.h threading.h $(INCLUDES) config.h version.h
405: $(GCC) $(CFLAGS) $(ENGINE_FLAGS) -c $(srcdir)/main.c
406:
407: strtoul.o: strtoul.c strtol.c
408:
409: primitives.b: primitives
410: m4 -s $(srcdir)/primitives >$@
411:
412: primitives.i : primitives.b prims2x.fs
413: $(FORTHK) prims2x.fs -e "s\" primitives.b\" ' output-c process-file bye" >$@
414:
415: prim_labels.i : primitives.b prims2x.fs
416: $(FORTHK) prims2x.fs -e "s\" primitives.b\" ' output-label process-file bye" >$@
417:
418: aliases.fs: primitives.b prims2x.fs
419: $(FORTHK) prims2x.fs -e "s\" primitives.b\" ' output-alias process-file bye" >$@
420:
421: primitives.fs: primitives.b prims2x.fs
422: $(FORTHK) prims2x.fs -e "s\" primitives.b\" ' output-forth process-file bye" >$@
423:
424: primitives.TAGS: primitives.b prims2x.fs
425: $(FORTHK) prims2x.fs -e "s\" $(srcdir)/primitives.b\" ' output-tag process-file bye" >$@
426:
427: doc.fd: makedoc.fs float.fs search-order.fs glocals.fs environ.fs \
428: toolsext.fs wordinfo.fs \
429: vt100.fs colorize.fs see.fs bufio.fs debug.fs history.fs \
430: doskey.fs vt100key.fs startup.fs assert.fs debugging.fs code.fs
431: $(FORTHK) -e "s\" doc.fd\"" makedoc.fs startup.fs code.fs -e bye
432:
433: crossdoc.fd: $(KERN_SRC) version.fs $(FORTH_GEN0)
434: $(FORTHK) -e 's" mach32l.fs"' main.fs -e bye
435:
436: gforth.texi: gforth.ds primitives.b ds2texi.fs prims2x.fs doc.fd crossdoc.fd
437: $(FORTHK) -m 100000 ds2texi.fs prims2x.fs -e "s\" $(srcdir)/primitives.b\" ' register-doc process-file" crossdoc.fd doc.fd -e "s\" $(srcdir)/gforth.ds\" r/o open-file throw ds2texi bye" >$@
438:
439: checkdoc: gforth.ds primitives.b ds2texi.fs prims2x.fs doc.fd crossdoc.fd answords.fs
440: $(FORTHK) ds2texi.fs answords.fs -e bye
441:
442: dvi: gforth.dvi
443:
444: gforth.dvi gforth.fns: gforth.texi
445: $(TEXI2DVI) gforth.texi
446:
447: gforth.ps: gforth.dvi
448: $(DVI2PS) gforth.dvi -o $@
449:
450: info: gforth.info
451:
452: gforth.info: gforth.texi
453: -$(MAKEINFO) gforth.texi
454:
455: html: gforth.texi
456: -$(RM) html/*
457: -mkdir html
458: cd html; $(TEXI2HTML) -menu -split_node ../gforth.texi
459:
460: doc: gforth.ps html
461:
462: # For an explanation of the following Makefile rules, see node
463: # `Automatic Remaking' in GNU Autoconf documentation.
464: $(srcdir)/configure: configure.in
465: cd $(srcdir) && autoconf
466:
467: # autoheader might not change config.h.in, so touch a stamp file.
468: $(srcdir)/config.h.in: stamp-h.in
469: $(srcdir)/stamp-h.in: configure.in acconfig.h
470: cd $(srcdir) && autoheader
471: echo timestamp > $(srcdir)/stamp-h.in
472:
473: config.h: stamp-h
474: stamp-h: config.h.in config.status
475: CONFIG_FILES=$@ CONFIG_HEADERS=config.h ./config.status
476: echo > stamp-h
477: Makefile: Makefile.in config.status
478: CONFIG_FILES=$@ CONFIG_HEADERS=config.h ./config.status
479:
480: config.status: configure
481: ./config.status --recheck
482:
483:
484: #create files for DOS, because DOS cannot do it itself
485: makefile.dos: mkdosmf.sed Makefile.in
486: sed -f mkdosmf.sed <Makefile.in >makefile.dos
487:
488: makefile.os2: mkos2mf.sed Makefile.in
489: sed -f mkos2mf.sed <Makefile.in >makefile.os2
490: echo '%.o: %.c' >>makefile.os2
491: echo ' $$(GCC) $$(CFLAGS) -c $$<' >>makefile.os2
492:
493: history.dos: history.fs Makefile.in
494: sed -e "s,~/\.gforth-history,/gforth.his,g" <history.fs >history.dos
495:
496: startup.dos: startup.fs Makefile.in
497: sed -e "s/\\\\ include doskey/include doskey/g" \
498: -e "s/include vt100key/\\\\ include vt100key/g" <startup.fs >startup.dos
499:
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>