--- gforth/Makefile.in 1995/10/16 18:33:04 1.35 +++ gforth/Makefile.in 1997/03/04 22:09:53 1.88 @@ -1,36 +1,64 @@ -#Copyright 1992 by the ANSI figForth Development Group +#Makefile for Gforth + +#Copyright (C) 1995, 1996 Free Software Foundation, Inc. + +#This file is part of Gforth. + +#Gforth is free software; you can redistribute it and/or +#modify it under the terms of the GNU General Public License +#as published by the Free Software Foundation; either version 2 +#of the License, or (at your option) any later version. + +#This program is distributed in the hope that it will be useful, +#but WITHOUT ANY WARRANTY; without even the implied warranty of +#MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.#See the +#GNU General Public License for more details. + +#You should have received a copy of the GNU General Public License +#along with this program; if not, write to the Free Software +#Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. -#To do: -#use $(srcdir) to make compilation in a non-srcdir possible - -VERSION =0.1beta#gforth version +#gforth version +VERSION_MAJOR=0 +VERSION_MINOR=3 +VERSION_RELEASE=0 +VERSION =$(VERSION_MAJOR).$(VERSION_MINOR).$(VERSION_RELEASE) +DOSVERSION=$(VERSION_MAJOR)$(VERSION_MINOR)$(VERSION_RELEASE) SHELL = /bin/sh RM = rm +RMTREE = rm -rf CP = cp +TAR = tar cf - INSTALL = @INSTALL@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_DATA = @INSTALL_DATA@ LN_S = @LN_S@ -GCC = gcc +GCC = @CC@ CC = $(GCC) -FORTH = ./gforth -FORTHK = $(FORTH) -i kernal.fi +PATHSEP = @PATHSEP@ +FORTHPATH = $(libdir)/gforth/site-forth$(PATHSEP)$(datadir)/gforth/site-forth$(PATHSEP)$(libdir)/gforth/$(VERSION)$(PATHSEP)$(datadir)/gforth/$(VERSION)$(PATHSEP). +FORTHSIZES = @FORTHSIZES@ +FORTH = ./gforth -p $(FORTHPATH)$(PATHSEP)$(srcdir) +FORTHKFLAGS= -p .$(PATHSEP)$(srcdir) -i ./kernel.fi +FORTHK = ./gforth $(FORTHKFLAGS) +FORTHP = ./gforth -i ./kernel.fi STRIP = strip TEXI2DVI = texi2dvi -DVI2PS = dvips +DVI2PS = dvips -D300 #you can get texi2html from http://asis01.cern.ch/infohtml/texi2html.html TEXI2HTML = texi2html MAKEINFO = makeinfo XCFLAGS = @CFLAGS@ XDEFINES = @DEFS@ SWITCHES = $(XCFLAGS) $(XDEFINES) #-DNDEBUG #turn off assertions -ENGINE_FLAGS = -fno-defer-pop -fcaller-saves +ENGINE_FLAGS = @ENGINE_FLAGS@ -fno-defer-pop -fcaller-saves DEBUGFLAG = @DEBUGFLAG@ -CFLAGS = -pipe -O4 -Wall $(SWITCHES) -DDEFAULTPATH=\"$(datadir)/gforth/$(VERSION):$(libdir)/gforth/$(VERSION):.\" +CFLAGS = $(DEBUGFLAG) -I. -I$(srcdir) -O4 -Wall $(SWITCHES) -DDEFAULTPATH=\"$(FORTHPATH)\" #John Wavrik should use -Xlinker -N to get a writable text (executable) XLDFLAGS = @LDFLAGS@ @@ -38,6 +66,7 @@ GCCLDFLAGS = @GCCLDFLAGS@ LDFLAGS = $(DEBUGFLAG) $(XLDFLAGS) $(GCCLDFLAGS) LDLIBS = @LIBS@ +VPATH = @srcdir@ prefix = @prefix@ exec_prefix = @exec_prefix@ srcdir = @srcdir@ @@ -47,53 +76,121 @@ datadir = $(prefix)/share #read-only architecture-dependent non-ascii files libdir = $(prefix)/lib infodir = $(prefix)/info -mandir = $(prefix)/man/man1 - - -INCLUDES = forth.h io.h - -KERN_SRC = main.fs search-order.fs cross.fs aliases.fs vars.fs add.fs \ - errore.fs kernal.fs version.fs extend.fs tools.fs toolsext.fs - -FORTH_SRC = anslocal.fs add.fs assert.fs ansi.fs answords.fs blocks.fs bufio.fs checkans.fs \ - code.fs colorize.fs cross.fs debug.fs debugging.fs doskey.fs ds2texi.fs \ - dumpimage.fs environ.fs errore.fs etags.fs extend.fs filedump.fs \ - float.fs glocals.fs glosgen.fs gray.fs hash.fs history.fs \ - kernal.fs locals-test.fs look.fs main.fs makedoc.fs \ - mach16b.fs mach16l.fs mach32b.fs mach32l.fs mach64b.fs mach64l.fs \ - other.fs prims2x.fs random.fs search-order.fs see.fs sieve.fs \ - startup.fs struct.fs tools.fs toolsext.fs tt.fs vars.fs vt100.fs \ - vt100key.fs wordinfo.fs wordsets.fs \ - tester.fs coretest.fs - -SOURCES = Makefile.in configure.in configure config.sub config.guess \ - install-sh INSTALL README ToDo BUGS model COPYING \ +mandir = $(prefix)/man +man1dir= $(mandir)/man1 +man1ext= .1 +#older emacses have their site-lisp in $(libdir)/emacs/ +emacssitelispdir=$(datadir)/emacs/site-lisp + +INCLUDES = forth.h threading.h io.h + +KERN_SRC = \ + aliases0.fs \ + aliases.fs \ + args.fs \ + conditionals.fs \ + cond-old.fs \ + cross.fs \ + errore.fs \ + files.fs \ + kernel.fs \ + main.fs \ + primitives0.fs \ + search-order.fs \ + special.fs \ + tools.fs \ + toolsext.fs \ + vars.fs + +GFORTH_FI_SRC = \ + assert.fs \ + blockedit.fb \ + blocks.fs \ + bufio.fs \ + debug.fs \ + debugging.fs \ + dumpimage.fs \ + environ.fs \ + errors.fs \ + extend.fs \ + float.fs \ + glocals.fs \ + hash.fs \ + history.fs \ + intcomp.fs \ + look.fs \ + search-order.fs \ + see.fs \ + see-ext.fs \ + source.fs \ + startup.fs \ + struct.fs \ + stuff.fs \ + tasker.fs \ + termsize.fs \ + vt100.fs \ + vt100key.fs \ + wordinfo.fs + +FORTH_SRC = $(KERN_SRC) $(GFORTH_FI_SRC) \ + ans-report.fs ansi.fs answords.fs \ + checkans.fs \ + code.fs colorize.fs \ + doskey.fs ds2texi.fs \ + etags.fs filedump.fs \ + glosgen.fs gray.fs \ + makedoc.fs comp-image.fs \ + mach16b.fs mach16l.fs mach32b.fs mach32l.fs mach64b.fs mach64l.fs \ + more.fs other.fs prims2x.fs random.fs \ + sieve.fs \ + site-init.fs \ + tt.fs sokoban.fs \ + wordsets.fs \ + tester.fs coretest.fs postponetest.fs dbltest.fs \ + bubble.fs siev.fs matrix.fs fib.fs \ + oof.fs oofsampl.fs objects.fs + +SOURCES = CVS compat Makefile.in configure.in configure config.sub config.guess \ + acconfig.h config.h.in stamp-h.in \ + install-sh INSTALL README ToDo BUGS model COPYING Benchres \ gforth.ds texinfo.tex gforth.1 gforth.el \ - primitives engine.c main.c io.c \ + primitives engine.c main.c io.c memcasecmp.c \ m68k.h mips.h 386.h hppa.h cache.c sparc.h power.h alpha.h 32bit.h \ getopt.c getopt1.c getopt.h select.c \ - ecvt.c memcmp.c strtol.c strtoul.c ansidecl.h memmove.c pow10.c \ - strerror.c strsignal.c \ - makefile.dos mkdosmf.sed configure.bat startup.dos \ + ecvt.c memcmp.c strtol.c strtoul.c ansidecl.h memmove.c pow10.c atanh.c \ + strerror.c strsignal.c dblsub.c \ + INSTALL.DOS makefile.dos mkdosmf.sed configure.bat dosconf.h \ + startup.dos history.dos mkinstalldirs \ + configure.cmd mkos2mf.sed os2conf.h makefile.os2 \ glosgen.glo glossaries.doc \ $(INCLUDES) $(FORTH_SRC) RCS_FILES = ToDo model high-level -GEN = gforth +GEN = gforth version.fs -OBJECTS = engine.o io.o main.o @LIBOBJS@ @getopt_long@ +OBJECTS0 = io.o memcasecmp.o @LIBOBJS@ @getopt_long@ +OBJECTS = engine.o main.o +OBJECTS_DITC = engine-ditc.o main-ditc.o # things that need a working forth system to be generated -FORTH_GEN0 = primitives.b primitives.i prim_labels.i aliases.fs -FORTH_GEN = $(FORTH_GEN0) @KERNAL@ gforth.fi +FORTH_GEN0 = primitives.b primitives.i prim_labels.i aliases.fs primitives.fs +FORTH_GEN = $(FORTH_GEN0) @KERNEL@ gforth.fi # this is used for antidependences, -FORTH_GEN1 = $(FORTH_GEN0) @kernal_fi@ +FORTH_GEN1 = $(FORTH_GEN0) @kernel_fi@ +#distributed documentation +DOCDIST = gforth.info* gforth.ps -KERNLS = kernl16b.fi+ kernl16l.fi+ \ - kernl32b.fi+ kernl32l.fi+ \ - kernl64b.fi+ kernl64l.fi+ +#stuff in a binonly distribution +BINONLYDIST = config.status Makefile gforth gforth-ditc \ + $(OBJECTS0) $(OBJECTS) $(OBJECTS_DITC)\ + machine.h config.h kernel.fi stamp-h version.h version.fs \ + INSTALL.BINDIST + +KERNLS = kernl16b.fi- kernl16l.fi- \ + kernl32b.fi- kernl32l.fi- \ + kernl64b.fi- kernl64l.fi- GEN_PRECIOUS = $(FORTH_GEN) $(KERNLS) gforth.texi gforth.dvi gforth.ps Makefile configure @@ -101,13 +198,20 @@ GEN_PRECIOUS = $(FORTH_GEN) $(KERNLS) gf .SUFFIXES: .SUFFIXES: .c .o -all: - if [ ! -f gforth ]; then $(MAKE) first; fi - $(MAKE) more +all: version.fs more -first: gforth +#this rule avoids remaking everything after minor changes in Makefile.in +version-stamp: Makefile.in + test x'$(VERSION)' = x`cat $@` || echo $(VERSION) >$@ -more: $(FORTH_GEN) gforth +version.h: version-stamp + echo "static char gforth_version[]=\"$(VERSION)\" ;" >$@ + +version.fs: version-stamp + $(MAKE) gforth + echo ": version-string s\" $(VERSION)\" ;" >$@ + +more: $(OBJECTS) $(FORTH_GEN) gforth #from the gcc Makefile: #"Deletion of files made during compilation. @@ -120,31 +224,72 @@ more: $(FORTH_GEN) gforth # `distclean' also deletes the files made by config. # `realclean' also deletes everything that could be regenerated automatically." -clean: - -$(RM) $(GEN) *.o *.s gforth.fi +mostlyclean: + -$(RM) -rf *.s gforth.fi *.fi~ *.fi- version.fs *TAGS \ + crossdoc.fd doc.fd gforth.texi gforth.fns gforth.aux gforth.cp gforth.cps \ + gforth.dvi gforth.fn gforth.ky gforth.log gforth.pg \ + gforth.toc gforth.tp gforth.vr html gforth-$(VERSION).tar.gz \ + version.h -distclean: clean - -$(RM) machine.h kernal.fi config.cache config.log +clean: mostlyclean + -$(RM) -rf $(GEN) *.o -realclean: distclean - -$(RM) $(GEN_PRECIOUS) +distclean: clean + -$(RM) machine.h kernel.fi config.cache config.log \ + config.status config.h Makefile stamp-h -dist: $(SOURCES) $(FORTH_GEN) - -rm -rf gforth-$(VERSION) +#realclean is useless, but dangerous, so it's commented out +#realclean: distclean +# -$(RM) $(GEN_PRECIOUS) + +#mostlyclean, but also remove some of the stuff that is distributed +virtualclean: mostlyclean + -$(RM) -rf gforth.fns gforth.texi gforth.ps gforth.info* \ + gforth-$(VERSION).tar.gz config.cache *~ */*~ + +#use dist targets only when srcdir=. +dist: $(SOURCES) $(FORTH_GEN0) @KERNEL@ $(DOCDIST) + -$(RMTREE) gforth-$(VERSION) + mkdir gforth-$(VERSION) + $(CP) -rp $(SOURCES) $(FORTH_GEN0) @KERNEL@ $(DOCDIST) gforth-$(VERSION) + $(TAR) gforth-$(VERSION)|gzip -9 >gforth-$(VERSION).tar.gz + -$(RMTREE) gforth-$(VERSION) + +#use dist targets only when srcdir=. +dosdist: $(SOURCES) $(FORTH_GEN0) @KERNEL@ $(DOCDIST) + -$(RMTREE) gforth.$(DOSVERSION) + mkdir gforth.$(DOSVERSION) + $(CP) -rp $(SOURCES) $(FORTH_GEN) $(DOCDIST) gforth.$(DOSVERSION) + zip -r9 gforth.zip gforth.$(DOSVERSION)/* + -$(RMTREE) gforth.$(DOSVERSION) + +#A source distribution contains only the things needed to install gforth, +#without the documents. +srcdist: $(SOURCES) $(FORTH_GEN0) @KERNEL@ + -$(RMTREE) gforth-$(VERSION) mkdir gforth-$(VERSION) - cp -p $(SOURCES) $(FORTH_GEN) gforth-$(VERSION) - tar cvf - gforth-$(VERSION)|gzip -9 >gforth-$(VERSION).tar.gz - -rm -rf gforth-$(VERSION) + $(CP) -rp $(SOURCES) $(FORTH_GEN0) @KERNEL@ gforth-$(VERSION) + $(TAR) gforth-$(VERSION)|gzip -9 >gforth-src-$(VERSION).tar.gz + -$(RMTREE) gforth-$(VERSION) + +#A document distribution contains only the documents, which can be created +#with MAKE. +docdist: $(DOCDIST) + -$(RMTREE) gforth-$(VERSION) + mkdir gforth-$(VERSION) + $(CP) -rp $(DOCDIST) gforth-$(VERSION) + $(TAR) gforth-$(VERSION)|gzip -9 >gforth-doc-$(VERSION).tar.gz + -$(RMTREE) gforth-$(VERSION) #a binary distribution contains the complete source distribution, # the objects, the executable and the links. the objects are there for making # make happy. -bindist: $(SOURCES) $(FORTH_GEN) gforth $(OBJECTS) config.status Makefile - -rm -rf gforth-$(VERSION) +bindist: $(SOURCES) $(FORTH_GEN0) @KERNEL@ $(DOCDIST) $(BINONLYDIST) + -$(RMTREE) gforth-$(VERSION) mkdir gforth-$(VERSION) - cp -p -d $(SOURCES) config.status Makefile $(FORTH_GEN) gforth $(OBJECTS) machine.h kernal.fi gforth-$(VERSION) + $(CP) -rp -d $(SOURCES) $(FORTH_GEN0) @KERNEL@ $(DOCDIST) $(BINONLYDIST) gforth-$(VERSION) strip gforth-$(VERSION)/gforth - tar cvf - gforth-$(VERSION)|gzip -9 >gforth-$(VERSION)-@host@.tar.gz + $(TAR) gforth-$(VERSION)|gzip -9 >gforth-$(VERSION)-@host@.tar.gz #makes a package with only the stuff not present in the source #package. For installation the source package is still needed! @@ -153,108 +298,164 @@ bindist: $(SOURCES) $(FORTH_GEN) gforth #all the binonly packages you are interested in on the disk. The user #then just has to unpack the source and his favourite binonly into the #same directory and has a full binary distribution. -binonlydist: $(SOURCES) $(FORTH_GEN) gforth $(OBJECTS) - -rm -rf gforth-$(VERSION) +binonlydist: $(SOURCES) $(FORTH_GEN0) @KERNEL@ $(DOCDIST) $(BINONLYDIST) + -$(RMTREE) gforth-$(VERSION) mkdir gforth-$(VERSION) - cp -p -d config.status Makefile gforth $(OBJECTS) machine.h kernal.fi gforth-$(VERSION) + $(CP) -p -d $(BINONLYDIST) gforth-$(VERSION) strip gforth-$(VERSION)/gforth - tar cvf - gforth-$(VERSION)|gzip -9 >gforth-$(VERSION)-binonly-@host@.tar.gz - + $(TAR) gforth-$(VERSION)|gzip -9 >gforth-$(VERSION)-binonly-@host@.tar.gz #strip gforth, because the debugging stuff is hardly useful once # gforth manages to execute more than a few primitives -install: gforth $(FORTH_SRC) kernal.fi gforth.fi gforth.1 gforth.info - $(INSTALL) -d $(bindir) $(mandir) $(infodir) $(libdir)/gforth/$(VERSION) $(datadir)/gforth/$(VERSION) +#install does not depend on gforth.info, because that would require +#supplying a lot of files that can be easily generated (only info is +#hard to generate) +install: gforth $(FORTH_SRC) kernel.fi gforth.fi gforth.1 primitives gforth.TAGS installdirs + touch $(datadir)/gforth/site-forth/site-init.fs + -$(RM) $(bindir)/gforth $(bindir)/gforth-$(VERSION) $(INSTALL_PROGRAM) -s gforth $(bindir) - $(INSTALL_DATA) gforth.1 $(mandir) - $(INSTALL_DATA) gforth.info* $(infodir) - for i in $(FORTH_SRC); do \ - $(INSTALL_DATA) $$i $(datadir)/gforth/$(VERSION); \ + ln $(bindir)/gforth $(bindir)/gforth-$(VERSION) + -$(INSTALL_DATA) $(srcdir)/gforth.1 $(man1dir) + -for i in $(srcdir)/gforth.info*; do $(INSTALL_DATA) $$i $(infodir); done + for i in $(FORTH_SRC) primitives; do \ + $(INSTALL_DATA) $(srcdir)/$$i $(datadir)/gforth/$(VERSION); \ done - rm gforth.fi; make gforth.fi #gforth.fi contains some path names - $(INSTALL_DATA) kernal.fi gforth.fi $(libdir)/gforth/$(VERSION) - -check: test - touch test - -test: gforth - @echo 'Expect to see INCORRECT RESULT: { GS1 -> }' - @echo 'This is a bug of the testing program' - $(FORTH) tester.fs coretest.fs -e bye - $(FORTH) startup.fs blocks.fs code.fs checkans.fs -e bye + $(INSTALL_DATA) kernel.fi $(libdir)/gforth/$(VERSION) + $(RM) gforth.fi; $(MAKE) gforth.fi #gforth.fi contains some path names + $(INSTALL_DATA) gforth.fi $(libdir)/gforth/$(VERSION) + sed s:^$(srcdir)/:$(datadir)/gforth/$(VERSION)/: gforth.TAGS >TAGS; $(INSTALL_DATA) TAGS $(datadir)/gforth/$(VERSION) + if test -d $(emacssitelispdir); then \ + $(INSTALL_DATA) $(srcdir)/gforth.el $(emacssitelispdir); \ + else \ + echo ">>>>>Please install $(srcdir)/gforth.el in your .../emacs/site-lisp directory"; \ + fi + echo ">>>>> Please make an entry for Gforth in your info dir file; e.g.:"; \ + echo "* Gforth: (gforth). A fast interpreter for the Forth language." + +install-strip: install + +installdirs: mkinstalldirs + $(srcdir)/mkinstalldirs $(bindir) $(man1dir) $(infodir) $(libdir)/gforth/$(VERSION) $(datadir)/gforth/$(VERSION) $(libdir)/gforth/site-forth $(datadir)/gforth/site-forth + +#deinstall all files specific to this version of gforth +#to uninstall version foo, type `make uninstall VERSION=foo' +uninstall: + -$(RM) -rf $(libdir)/gforth/$(VERSION) $(datadir)/gforth/$(VERSION) $(bindir)/gforth-$(VERSION) + @echo -e "Type\n$(RM) -rf $(bindir)/gforth $(man1dir)/gforth.1 $(infodir)/gforth.info* $(datadir)/gforth $(libdir)/gforth\nto remove Gforth completely" + +check test: gforth gforth.fi + $(FORTH) tester.fs coretest.fs postponetest.fs dbltest.fs -e bye + $(FORTH) code.fs checkans.fs -e bye @echo 'Expect no differences' - $(FORTH) prims2x.fs -e "s\" primitives.b\" ' output-c process-file bye"| diff -c - primitives.i + $(FORTH) -m 100000 prims2x.fs -e "s\" $(srcdir)/primitives.b\" ' output-c process-file bye"| diff -c - $(srcdir)/primitives.i + +bench: gforth gforth.fi + @echo 'Each benchmark takes about 30s on a 486-66 (gcc-2.6.3 -DFORCE_REG)' + time $(FORTH) siev.fs -e "main bye" + time $(FORTH) bubble.fs -e "main bye" + time $(FORTH) -m 160000 matrix.fs -e "main bye" + time $(FORTH) fib.fs -e "main bye" dvi: gforth.dvi -gforth: $(OBJECTS) +gforth: $(OBJECTS) $(OBJECTS0) -$(CP) gforth gforth~ - $(GCC) $(LDFLAGS) $(OBJECTS) $(LDLIBS) -o $@ + $(GCC) $(LDFLAGS) $(OBJECTS) $(OBJECTS0) $(LDLIBS) -o $@ @MAKE_EXE@ -kernl16l.fi+: $(KERN_SRC) mach16l.fs $(FORTH_GEN0) - $(FORTHK) -e 's" mach16l.fs"' main.fs +gforth-ditc: $(OBJECTS_DITC) $(OBJECTS0) + $(GCC) $(LDFLAGS) $(OBJECTS_DITC) $(OBJECTS0) $(LDLIBS) -o $@ + @MAKE_EXE@ + +kernl%.fi-: mach%.fs $(KERN_SRC) version.fs $(FORTH_GEN0) + $(FORTHK) -e 's" $<"' main.fs -e "save-cross $@ $(bindir)/gforth-$(VERSION) bye" + +kernl16l.fi-: $(KERN_SRC) version.fs mach16l.fs $(FORTH_GEN0) + $(FORTHK) -e 's" mach16l.fs"' main.fs -e "save-cross kernl16l.fi- $(bindir)/gforth-$(VERSION) bye" -kernl16b.fi+: $(KERN_SRC) mach16b.fs $(FORTH_GEN0) - $(FORTHK) -e 's" mach16b.fs"' main.fs +kernl16b.fi-: $(KERN_SRC) version.fs mach16b.fs $(FORTH_GEN0) + $(FORTHK) -e 's" mach16b.fs"' main.fs -e "save-cross kernl16b.fi- $(bindir)/gforth-$(VERSION) bye" -kernl32l.fi+: $(KERN_SRC) mach32l.fs $(FORTH_GEN0) - $(FORTHK) -e 's" mach32l.fs"' main.fs +kernl32l.fi-: $(KERN_SRC) version.fs mach32l.fs $(FORTH_GEN0) + $(FORTHK) -e 's" mach32l.fs"' main.fs -e "save-cross kernl32l.fi- $(bindir)/gforth-$(VERSION) bye" -kernl32b.fi+: $(KERN_SRC) mach32b.fs $(FORTH_GEN0) - $(FORTHK) -e 's" mach32b.fs"' main.fs +kernl32b.fi-: $(KERN_SRC) version.fs mach32b.fs $(FORTH_GEN0) + $(FORTHK) -e 's" mach32b.fs"' main.fs -e "save-cross kernl32b.fi- $(bindir)/gforth-$(VERSION) bye" -kernl64l.fi+: $(KERN_SRC) mach64l.fs $(FORTH_GEN0) - $(FORTHK) -e 's" mach64l.fs"' main.fs +kernl64l.fi-: $(KERN_SRC) version.fs mach64l.fs $(FORTH_GEN0) + $(FORTHK) -e 's" mach64l.fs"' main.fs -e "save-cross kernl64l.fi- $(bindir)/gforth-$(VERSION) bye" -kernl64b.fi+: $(KERN_SRC) mach64b.fs $(FORTH_GEN0) - $(FORTHK) -e 's" mach64b.fs"' main.fs +kernl64b.fi-: $(KERN_SRC) version.fs mach64b.fs $(FORTH_GEN0) + $(FORTHK) -e 's" mach64b.fs"' main.fs -e "save-cross kernl64b.fi- $(bindir)/gforth-$(VERSION) bye" + +kernl%.fi: kernl%.fi- $(KERNLS) + -$(CP) $@ $@~ + -$(CP) $< $@ + @LINK_KERNL@ kernl16b.fi: $(KERNLS) -$(CP) kernl16b.fi kernl16b.fi~ - -$(CP) kernl16b.fi+ kernl16b.fi + -$(CP) kernl16b.fi- kernl16b.fi @LINK_KERNL16B@ kernl16l.fi: $(KERNLS) -$(CP) kernl16l.fi kernl16l.fi~ - -$(CP) kernl16l.fi+ kernl16l.fi + -$(CP) kernl16l.fi- kernl16l.fi @LINK_KERNL16L@ kernl32b.fi: $(KERNLS) -$(CP) kernl32b.fi kernl32b.fi~ - -$(CP) kernl32b.fi+ kernl32b.fi + -$(CP) kernl32b.fi- kernl32b.fi @LINK_KERNL32B@ kernl32l.fi: $(KERNLS) -$(CP) kernl32l.fi kernl32l.fi~ - -$(CP) kernl32l.fi+ kernl32l.fi + -$(CP) kernl32l.fi- kernl32l.fi @LINK_KERNL32L@ kernl64b.fi: $(KERNLS) -$(CP) kernl64b.fi kernl64b.fi~ - -$(CP) kernl64b.fi+ kernl64b.fi + -$(CP) kernl64b.fi- kernl64b.fi @LINK_KERNL64B@ kernl64l.fi: $(KERNLS) -$(CP) kernl64l.fi kernl64l.fi~ - -$(CP) kernl64l.fi+ kernl64l.fi + -$(CP) kernl64l.fi- kernl64l.fi @LINK_KERNL64L@ -gforth.fi: @kernal_fi@ gforth startup.fs glocals.fs search-order.fs hash.fs float.fs debugging.fs environ.fs wordinfo.fs look.fs vt100.fs see.fs bufio.fs debug.fs history.fs vt100key.fs assert.fs blocks.fs struct.fs dumpimage.fs - $(FORTHK) startup.fs dumpimage.fs -e "savesystem gforth.fi bye" +gforth.fi: @kernel_fi@ gforth-makeimage gforth gforth-ditc $(GFORTH_FI_SRC) + GFORTH=./gforth-ditc $(srcdir)/gforth-makeimage gforth.fi $(FORTHSIZES) $(FORTHKFLAGS) startup.fs + +#TAGS is a GNU standard target +TAGS: gforth.TAGS + $(CP) gforth.TAGS $@ + +gforth.TAGS: @kernel_fi@ gforth $(GFORTH_FI_SRC) primitives.TAGS + $(FORTHK) etags.fs startup.fs -e bye + cat TAGS primitives.TAGS kernel.TAGS >gforth.TAGS + rm TAGS -engine.s: engine.c primitives.i prim_labels.i machine.h $(INCLUDES) - $(GCC) $(CFLAGS) $(ENGINE_FLAGS) -S engine.c +engine.s: engine.c primitives.i prim_labels.i machine.h threading.h $(INCLUDES) config.h + $(GCC) $(CFLAGS) $(ENGINE_FLAGS) -S $(srcdir)/engine.c -engine.o: engine.c primitives.i prim_labels.i machine.h $(INCLUDES) - $(GCC) $(CFLAGS) $(ENGINE_FLAGS) -c engine.c +engine.o: engine.c primitives.i prim_labels.i machine.h threading.h $(INCLUDES) config.h + $(GCC) $(CFLAGS) $(ENGINE_FLAGS) -c $(srcdir)/engine.c + +engine-ditc.o: engine.c primitives.i prim_labels.i machine.h threading.h $(INCLUDES) config.h + $(GCC) $(CFLAGS) $(ENGINE_FLAGS) -DDOUBLY_INDIRECT -o $@ -c $(srcdir)/engine.c + +main.o: main.c machine.h threading.h $(INCLUDES) config.h version.h + $(GCC) $(CFLAGS) $(ENGINE_FLAGS) -c $(srcdir)/main.c + +main-ditc.o: main.c machine.h threading.h $(INCLUDES) config.h version.h + $(GCC) $(CFLAGS) $(ENGINE_FLAGS) -DDOUBLY_INDIRECT -o $@ -c $(srcdir)/main.c strtoul.o: strtoul.c strtol.c primitives.b: primitives - m4 primitives >$@ + m4 -s $(srcdir)/primitives >$@ primitives.i : primitives.b prims2x.fs $(FORTHK) prims2x.fs -e "s\" primitives.b\" ' output-c process-file bye" >$@ @@ -262,18 +463,16 @@ primitives.i : primitives.b prims2x.fs prim_labels.i : primitives.b prims2x.fs $(FORTHK) prims2x.fs -e "s\" primitives.b\" ' output-label process-file bye" >$@ -aliases.fs: primitives.b prims2x.fs - $(FORTHK) prims2x.fs -e "s\" primitives.b\" ' output-alias process-file bye" >$@ - -primitives.fs: primitives.b prims2x.fs - $(FORTHK) prims2x.fs -e "s\" primitives.b\" ' output-forth process-file bye" >$@ - -version.fs: Makefile.in - echo ": version-string s\" $(VERSION)\" ;" >$@ - -version.c: Makefile.in - echo "char gforth_version[]=\"$(VERSION)\" ;" >$@ +aliases.fs: primitives.b prims2x.fs aliases0.fs + $(CP) aliases0.fs aliases.fs + $(FORTHK) prims2x.fs -e "s\" primitives.b\" ' output-alias process-file bye" >>$@ + +primitives.fs: primitives.b prims2x.fs primitives0.fs + $(CP) primitives0.fs primitives.fs + $(FORTHK) prims2x.fs -e "s\" primitives.b\" ' output-forth process-file bye" >>$@ +primitives.TAGS: primitives.b prims2x.fs + $(FORTHK) prims2x.fs -e "s\" $(srcdir)/primitives.b\" ' output-tag process-file bye" >$@ doc.fd: makedoc.fs float.fs search-order.fs glocals.fs environ.fs \ toolsext.fs wordinfo.fs \ @@ -281,21 +480,25 @@ doc.fd: makedoc.fs float.fs search-orde doskey.fs vt100key.fs startup.fs assert.fs debugging.fs code.fs $(FORTHK) -e "s\" doc.fd\"" makedoc.fs startup.fs code.fs -e bye -crossdoc.fd: $(KERN_SRC) $(FORTH_GEN0) - $(FORTHK) -e 's" mach32l.fs"' main.fs +crossdoc.fd: $(KERN_SRC) version.fs $(FORTH_GEN0) + $(FORTHK) -e 's" mach32l.fs"' main.fs -e bye gforth.texi: gforth.ds primitives.b ds2texi.fs prims2x.fs doc.fd crossdoc.fd - $(FORTHK) ds2texi.fs -e "s\" gforth.ds\" r/o open-file throw ds2texi bye" >$@ + $(FORTHK) -m 100000 ds2texi.fs prims2x.fs -e "s\" $(srcdir)/primitives.b\" ' register-doc process-file" crossdoc.fd doc.fd -e "s\" $(srcdir)/gforth.ds\" r/o open-file throw ds2texi bye" >$@ checkdoc: gforth.ds primitives.b ds2texi.fs prims2x.fs doc.fd crossdoc.fd answords.fs $(FORTHK) ds2texi.fs answords.fs -e bye -gforth.dvi: gforth.texi +dvi: gforth.dvi + +gforth.dvi gforth.fns: gforth.texi $(TEXI2DVI) gforth.texi gforth.ps: gforth.dvi $(DVI2PS) gforth.dvi -o $@ +info: gforth.info + gforth.info: gforth.texi -$(MAKEINFO) gforth.texi @@ -304,18 +507,43 @@ html: gforth.texi -mkdir html cd html; $(TEXI2HTML) -menu -split_node ../gforth.texi +doc: gforth.ps html + # For an explanation of the following Makefile rules, see node # `Automatic Remaking' in GNU Autoconf documentation. -Makefile: Makefile.in config.status - CONFIG_FILES=$@ CONFIG_HEADERS= ./config.status -config.status: configure - ./config.status --recheck -configure: configure.in - cd $(srcdir) && autoconf +$(srcdir)/configure: configure.in + cd $(srcdir) && autoconf +# autoheader might not change config.h.in, so touch a stamp file. +$(srcdir)/config.h.in: stamp-h.in +$(srcdir)/stamp-h.in: configure.in acconfig.h + cd $(srcdir) && autoheader + echo timestamp > $(srcdir)/stamp-h.in + +config.h: stamp-h +stamp-h: config.h.in config.status + CONFIG_FILES=$@ CONFIG_HEADERS=config.h ./config.status + echo > stamp-h +Makefile: Makefile.in config.status + CONFIG_FILES=$@ CONFIG_HEADERS=config.h ./config.status + +config.status: configure + ./config.status --recheck + + +#create files for DOS, because DOS cannot do it itself makefile.dos: mkdosmf.sed Makefile.in sed -f mkdosmf.sed makefile.dos +makefile.os2: mkos2mf.sed Makefile.in + sed -f mkos2mf.sed makefile.os2 + echo '%.o: %.c' >>makefile.os2 + echo ' $$(GCC) $$(CFLAGS) -c $$<' >>makefile.os2 + +history.dos: history.fs Makefile.in + sed -e "s,~/\.gforth-history,/gforth.his,g" history.dos + startup.dos: startup.fs Makefile.in sed -e "s/\\\\ include doskey/include doskey/g" \ - -e "s/include vt100key/\\\\ include vt100key/g" <$< >$@ \ No newline at end of file + -e "s/include vt100key/\\\\ include vt100key/g" startup.dos +