1: You need gcc version 2.0 or later to compile gforth.
3: First, type
7: configure has the following useful parameters:
8: --prefix=PREFIX install architecture-independent files in PREFIX
9: [default: /usr/local]
10: --exec-prefix=PREFIX install architecture-dependent files in PREFIX
11: [default: same as prefix]
12: --enable-force-reg Use explicit register declarations if they appear in
13: the machine.h file. This can cause a good speedup,
14: but also incorrect code with some gcc versions on
15: some processors (default disabled).
16: --enable-direct-threaded Force direct threading. This may not work on
17: some machines and may cause slowdown on others.
18: (default processor-dependent)
19: --enable-indirect-threaded Force indirect threading. This can cause a
20: slowdown on some machines.
21: (default processor-dependent)
22: --with-debug specifies option -g to compile with debug info (default)
23: --without-debug omits the -g switch and creates smaller images on
24: machines where strip has problems with gcc style
25: debugging informations.
26: --help: tells you about other parameters.
28: If you don't like the defaults for the installation directories, you
29: should override them already during configure. E.g., if you want to
30: install in the /gnu hierarchy instead of in the default /usr/local
31: hirarchy, say
33: ./configure --prefix=/gnu
35: After, configuration, type
39: If your make has trouble with the Makefile, "make gforth" might work.
41: If your installed gcc isn't called "gcc" (e.g., called "gcc-2.6.1"), type
43: make GCC=<whatever you call your gcc>
47: Now you can check whether your shiny new Forth system works. Say
49: make test
51: You can run some benchmarks with
53: make bench
55: and compare them with the results in Benchres and in the manual.
57: If everything is all right, you may want to install gforth. Type
59: make install
61: You have to make an entry in the info directory file manually.
63: For paper documentation, print gforth.ps (a Postscript file (300dpi
64: fonts, i.e., it works, but does not produce best quality on better
65: printers)), or say
67: make gforth.dvi
69: and print the resulting file gforth.dvi. You can also get the
70: documentation in HTML format by typing
72: make html
75: Preloading installation-specific code
77: If you want to have some installation-specific files loaded when
78: Gforth starts (e.g., an assembler for your processor), put commands
79: for loading them into /usr/local/share/gforth/site-forth/site-init.fs
80: (if the commands work for all architectures) or
81: /usr/local/lib/gforth/site-forth/site-init.fs (for
82: architecture-specific commands);
83: /usr/local/lib/gforth/site-forth/site-init.fs takes precedence if both
84: files are present (unless you change the search path). The file names
85: given above are the defaults; if you have changed the prefix, you have
86: to replace "/usr/local" in these names with your prefix.
88: By default, the installation procedure creates an empty
89: /usr/local/share/gforth/site-forth/site-init.fs if there is no such
92: If you change the site-init.fs file, you should run "make install"
93: again for the changes to take effect (Actually, the part of "make
94: install" starting with "rm gforth.fi" is sufficient).
97: Multiple Versions and Deinstallation
99: Several versions of Gforth can be installed and used at the same
100: time. Version `foo' can be invoked with `gforth-foo'. We recommend to
101: keep the old version for some time after a new one has been installed.
103: You can deinstall this version of Gforth with 'make uninstall' and
104: version foo with 'make uninstall VERSION=foo'. 'make uninstall' also
105: tells you how to uninstall Gforth completely.
108: A Possible Problem
110: You need to read this only if you see a message like
112: "gforth: Cannot load nonrelocatable image (compiled for address 0x1234) at address 0x5678
113: The Gforth installer should look into the INSTALL file"
115: Gforth supports both relocatable and fixed-address images. If you load
116: normal Forth code and save the image, you get a fixed-address
117: image. Producing a relocatable image is more difficult.
119: Therefore, Gforth has only a relocatable image of the kernel
120: (kernal.fi), which is powerful enough to load the rest of
121: Gforth. However, loading the rest takes a noticable amount of time. To
122: avoid this delay (which would occur on every startup), the
123: installation procedure produces an image fixed at an address
124: determined at the Gforth run that produced the image. This
125: fixed-address image is loaded by default. On most OSs this works,
126: because the first chunk of memory is always allocated at the same
127: address. If the address changes, you get the message above.
129: An image address change can be caused by a change of the gforth
130: executable, or by a change (upgrade) of the OS; in these cases you
131: just have to rebuild and reinstall the fixed address image with
133: rm gforth.fi; make gforth.fi; make install
135: If you get such a message with a different address in place of the
136: 0x5678 each time you try to start gforth, you cannot use fixed-address
137: images on your OS. In this case, send us a message so that we start
138: searching for a comfortable solution to this problem. In the
139: meantime, start gforth with
141: gforth -i kernal.fi startup.fs