--- gforth/INSTALL 1996/10/31 17:41:15 1.23 +++ gforth/INSTALL 2003/03/09 12:54:31 1.33 @@ -1,3 +1,7 @@ +Copyright (C) 2003 Free Software Foundation, Inc. +This file is free documentation; the Free Software Foundation gives +unlimited permission to copy, distribute and modify it. + You need gcc version 2.0 or later to compile gforth. First, type @@ -12,7 +16,7 @@ make Now you can check whether your shiny new Forth system works. Say -make test +make check You can run some benchmarks with @@ -24,7 +28,8 @@ If everything is all right, you may want make install -You have to make an entry in the info directory file manually. +You have to make an entry in the info directory file manually (see +Installing Info Files, below). For paper documentation, print gforth.ps (a Postscript file (300dpi fonts, i.e., it works, but does not produce best quality on better @@ -37,8 +42,16 @@ documentation in HTML format by typing make html -If you prefer plain ASCII documentation, just concatenate the files -gforth.info-* ('cat gforth.info-*' under Unix). +If you prefer plain ASCII documentation, you can + +make doc/gforth.txt + +or just concatenate the files gforth.info-* ('cat gforth.info-*' under +Unix); the result of the latter option is a little worse. + +You can find binary distributions, documentation in HTML and plain +text format and information on known installation problems at +http://www.complang.tuwien.ac.at/forth/gforth/. Configuration Options @@ -62,16 +75,6 @@ configure has the following useful param the machine.h file. This can cause a good speedup, but also incorrect code with some gcc versions on some processors (default disabled). - --enable-direct-threaded Force direct threading. This may not work on - some machines and may cause slowdown on others. - (default processor-dependent) - --enable-indirect-threaded Force indirect threading. This can cause a - slowdown on some machines. - (default processor-dependent) - --with-debug specifies option -g to compile with debug info (default) - --without-debug omits the -g switch and creates smaller images on - machines where strip has problems with gcc style - debugging informations. --help: tells you about other parameters. The file Benchres shows which combination of the -enable options we @@ -98,29 +101,83 @@ You can change the sizes of the various image `gforth.fi' by passing the appropriate Gforth command line options in the FORTHSIZES environment variable: -env "FORTHSIZES=--dictionary-size=256k --data-stack-size=16k --fp-stack-size=16k --return-stack-size=16k --locals-stack-size=16k" ./configure +env "FORTHSIZES=--dictionary-size=256k --data-stack-size=16k --fp-stack-size=15872b --return-stack-size=15k --locals-stack-size=14848b" ./configure The line above reaffirms the default sizes. Note that the locals stack area is also used as input buffer stack. +If C's "long long" do not work properly on your machine (i.e., if the +tests involving double-cell numbers fail), you can build Gforth such +that it does not use "long long": + +env ac_cv_sizeof_long_long=0 ./configure + + + Cross-Installation + +You need a cross-compilation toolchain for your target including gcc +(2.0 or later). + +The first step in cross-installation is the cross-configuration. A +few tests made by the configure script do not work in a +cross-compilation situation. You have to provide the results of these +tests by hand. E.g., if you compile for a 386 architecture processor: + +env ac_cv_sizeof_char_p=4 ac_cv_sizeof_char=1 ac_cv_sizeof_short=2 ac_cv_sizeof_int=4 ac_cv_sizeof_long=4 ac_cv_sizeof_long_long=8 ac_cv_sizeof_intptr_t=4 ac_cv_sizeof_int128_t=0 ac_cv_c_bigendian=no ./configure + +The ac_cv_sizeof_... variables give the sizes of various C types; +ac_cv_sizeof_char_p is the same as "sizeof(char*)" in C code. The +ac_cv_c_bigendian variable gives the byte order. + +After the cross-configuration you type + +make gforths + +This produces the gforth engines for the target. + +The next step is to transfer everything to the target; on the target, +you do + +make + +to complete building gforth. If you do not have a make on the target, +run + +make -n + +on the host; manually execute on the target the last command output by +"make -n" (GFORTHD=...); the other commands output by "make -n" are +not necessary unless you have changed the Gforth sources. You can +then check and benchmark Gforth with + +make check +make bench + +or equivalent. Finally, perform + +make install + +or the equivalent commands on the target. + + Preloading installation-specific code If you want to have some installation-specific files loaded when Gforth starts (e.g., an assembler for your processor), put commands -for loading them into /usr/local/share/gforth/site-forth/site-init.fs +for loading them into /usr/local/share/gforth/site-forth/siteinit.fs (if the commands work for all architectures) or -/usr/local/lib/gforth/site-forth/site-init.fs (for +/usr/local/lib/gforth/site-forth/siteinit.fs (for architecture-specific commands); -/usr/local/lib/gforth/site-forth/site-init.fs takes precedence if both +/usr/local/lib/gforth/site-forth/siteinit.fs takes precedence if both files are present (unless you change the search path). The file names given above are the defaults; if you have changed the prefix, you have to replace "/usr/local" in these names with your prefix. By default, the installation procedure creates an empty -/usr/local/share/gforth/site-forth/site-init.fs if there is no such +/usr/local/share/gforth/site-forth/siteinit.fs if there is no such file. -If you change the site-init.fs file, you should run "make install" +If you change the siteinit.fs file, you should run "make install" again for the changes to take effect (Actually, the part of "make install" starting with "rm gforth.fi" is sufficient). @@ -136,64 +193,26 @@ version foo with 'make uninstall VERSION tells you how to uninstall Gforth completely. - A Possible Problem - -You need to read this only if you see a message like - -... -The Gforth installer should look into the INSTALL file - -1) "gforth: Cannot load nonrelocatable image (compiled for address $1234) at address $5678 -The Gforth installer should look into the INSTALL file" - -Gforth supports both relocatable and fixed-address images. If you load -normal Forth code and save the image, you get a fixed-address -image. Producing a relocatable image is more difficult. - -Therefore, Gforth has only a relocatable image of the kernel -(kernel.fi), which is powerful enough to load the rest of -Gforth. However, loading the rest takes a noticable amount of time. To -avoid this delay (which would occur on every startup), the -installation procedure produces an image fixed at an address -determined at the Gforth run that produced the image. This -fixed-address image is loaded by default. On most OSs this works, -because the first chunk of memory is always allocated at the same -address. If the address changes, you get the message above. - -An image address change can be caused by a change of the gforth -executable, or by a change (upgrade) of the OS; in these cases you -just have to rebuild and reinstall the fixed address image with - -rm gforth.fi; make gforth.fi; make install - -If you get such a message with a different address in place of the -$5678 each time you try to start gforth, you cannot use fixed-address -images on your OS. In this case, send us a message so that we start -searching for a comfortable solution to this problem. In the -meantime, start gforth with - -gforth -i kernel.fi startup.fs - + Installing Info Files -2) "%s: Checksum of image ($13579b) does not match the executable ($2468a) -The Gforth installer should look into the INSTALL file" +Info is the GNU project on-line documentation format. You can read +info files either from within Emacs (Ctrl-h i) or using the +stand-alone Info reader, 'info'. -A fixed-address image is not only fixed with respect to its base -address, but also with respect to certain addresses in the gforth -executable and the threading method. These things are encoded in a -checksum. +If you use the default install root of '/usr/local' then the info +files will be installed in '/usr/local/info'. -If the checksum of the executable and the checksum of the image are -not equal, you get the message above. This can be caused, e.g., by -trying to run an image produced for a direct threading system on an -indirect threaded system. +Many GNU/Linux distributions are set up to put all of their +documentation in '/usr/info', in which case you might have to do a +couple of things to get your environment set up to accommodate files +in both areas: -Chances are that you unintentionally tried to execute an image from -the wrong directory. As a remedy, you can specify Gforth's search -path with the "-p" command line option and with the GFORTHPATH -environment variable. +1. Add an INFOPATH environment variable. The easiest place to do +this is '/etc/profile', right next to PATH and MANPATH: -On the other hand, if you need to solve the problem by creating a new -fixed-address image, you can use the steps described above. +INFOPATH=/usr/local/info:/usr/info +2. Create a file called 'dir' in 'usr/local/info'. Use the file +'/usr/info/dir' as a template. You can add the line for gforth +manually, or use '/sbin/install-info' (man install-info for details).