Diff for /gforth/INSTALL between versions 1.16 and 1.19

version 1.16, 1995/12/11 13:15:18 version 1.19, 1996/05/03 13:05:04
Line 4  First, type Line 4  First, type
   
 ./configure  ./configure
   
 or  
   
 CC=<whatever you call your gcc> ./configure  
   
 if your local gcc installation uses a different name (e.g. gcc-2.7.2),  
 or you want to generate for a different binary format (e.g.  "gcc -b  
 i486-linuxaout -V 2.7.0" to generate an a.out executable under Linux  
 which you may give your friends who don't have ELF libraries).  
   
 configure has the following useful parameters:  configure has the following useful parameters:
   --prefix=PREFIX         install architecture-independent files in PREFIX    --prefix=PREFIX         install architecture-independent files in PREFIX
                           [default: /usr/local]                            [default: /usr/local]
Line 41  hierarchy, say Line 32  hierarchy, say
   
 ./configure --prefix=/gnu  ./configure --prefix=/gnu
   
 After, configuration, type  Moreover, if your GCC is not called gcc (but, e.g., gcc-2.7.1), you
   should say so during configuration. E.g.:
   
 make  env CC=gcc-2.7.1 ./configure
   
 If your make has trouble with the Makefile, "make gforth" might work.  You can also pass additional options to gcc in this way, e.g., if you
   want to generate an a.out executable under Linux with gcc-2.7.0:
   
 If your installed gcc isn't called "gcc" (e.g., called "gcc-2.7.2"), type  env "CC=gcc -b i486-linuxaout -V 2.7.0" ./configure
   
 make GCC=<whatever you call your gcc>  After, configuration, type
   
 instead. The more appropriate place to select your compiler is when  make
 running configure.  
   
 Now you can check whether your shiny new Forth system works. Say  Now you can check whether your shiny new Forth system works. Say
   
Line 64  make bench Line 56  make bench
   
 and compare them with the results in Benchres and in the manual.  and compare them with the results in Benchres and in the manual.
   
 If everything is allright, you may want to install gforth. Type  If everything is all right, you may want to install gforth. Type
   
 make install  make install
   
Line 81  documentation in HTML format by typing Line 73  documentation in HTML format by typing
   
 make html  make html
   
   If you prefer plain ASCII documentation, just concatenate the files
   gforth.info-* ('cat gforth.info-*' under Unix).
   
                   Preloading installation-specific code
   
   If you want to have some installation-specific files loaded when
   Gforth starts (e.g., an assembler for your processor), put commands
   for loading them into /usr/local/share/gforth/site-forth/site-init.fs
   (if the commands work for all architectures) or
   /usr/local/lib/gforth/site-forth/site-init.fs (for
   architecture-specific commands);
   /usr/local/lib/gforth/site-forth/site-init.fs takes precedence if both
   files are present (unless you change the search path). The file names
   given above are the defaults; if you have changed the prefix, you have
   to replace "/usr/local" in these names with your prefix.
   
   By default, the installation procedure creates an empty
   /usr/local/share/gforth/site-forth/site-init.fs if there is no such
   file.
   
   If you change the site-init.fs file, you should run "make install"
   again for the changes to take effect (Actually, the part of "make
   install" starting with "rm gforth.fi" is sufficient).
   
   
                 Multiple Versions and Deinstallation                  Multiple Versions and Deinstallation
   
 Several versions of Gforth can be installed and used at the same  Several versions of Gforth can be installed and used at the same
Line 91  You can deinstall this version of Gforth Line 108  You can deinstall this version of Gforth
 version foo with 'make uninstall VERSION=foo'. 'make uninstall' also  version foo with 'make uninstall VERSION=foo'. 'make uninstall' also
 tells you how to uninstall Gforth completely.  tells you how to uninstall Gforth completely.
   
   
                         A Possible Problem                          A Possible Problem
   
 You need to read this only if you see a message like  You need to read this only if you see a message like
   
 "gforth: Cannot load nonrelocatable image (compiled for address 0x1234) at address 0x5678  ...
   The Gforth installer should look into the INSTALL file
   
   1) "gforth: Cannot load nonrelocatable image (compiled for address $1234) at address $5678
 The Gforth installer should look into the INSTALL file"  The Gforth installer should look into the INSTALL file"
   
 Gforth supports both relocatable and fixed-address images. If you load  Gforth supports both relocatable and fixed-address images. If you load
Line 119  just have to rebuild and reinstall the f Line 140  just have to rebuild and reinstall the f
 rm gforth.fi; make gforth.fi; make install  rm gforth.fi; make gforth.fi; make install
   
 If you get such a message with a different address in place of the  If you get such a message with a different address in place of the
 0x5678 each time you try to start gforth, you cannot use fixed-address  $5678 each time you try to start gforth, you cannot use fixed-address
 images on your OS. In this case, send us a message so that we start  images on your OS. In this case, send us a message so that we start
 searching for a comfortable solution to this problem. In the  searching for a comfortable solution to this problem. In the
 meantime, start gforth with  meantime, start gforth with
   
 gforth -i kernal.fi startup.fs  gforth -i kernal.fi startup.fs
   
   
   2) "%s: Checksum of image ($13579b) does not match the executable ($2468a)
   The Gforth installer should look into the INSTALL file"
   
   A fixed-address image is not only fixed with respect to its base
   address, but also with respect to certain addresses in the gforth
   executable and the threading method. These things are encoded in a
   checksum.
   
   If the checksum of the executable and the checksum of the image are
   not equal, you get the message above. This can be caused, e.g., by
   trying to run an image produced for a direct threading system on an
   indirect threaded system.
   
   Chances are that you unintentionally tried to execute an image from
   the wrong directory. As a remedy, you can determine Gforth's search
   path with the "-p" command line option and with the GFORTHPATH
   environment variable.
   
   On the other hand, if you need to solve the problem by creating a new
   fixed-address image, you can use the steps described above.
   
   

Removed from v.1.16  
changed lines
  Added in v.1.19


FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>