Annotation of gforth/makefile.dos, revision 1.13

1.7       anton       1: #Makefile for Gforth
                      2: 
                      3: #Copyright (C) 1995 Free Software Foundation, Inc.
                      4: 
                      5: #This file is part of Gforth.
                      6: 
                      7: #Gforth is free software; you can redistribute it and/or
                      8: #modify it under the terms of the GNU General Public License
                      9: #as published by the Free Software Foundation; either version 2
                     10: #of the License, or (at your option) any later version.
                     11: 
                     12: #This program is distributed in the hope that it will be useful,
                     13: #but WITHOUT ANY WARRANTY; without even the implied warranty of
                     14: #MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.#See the
                     15: #GNU General Public License for more details.
                     16: 
                     17: #You should have received a copy of the GNU General Public License
                     18: #along with this program; if not, write to the Free Software
                     19: #Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
                     20: 
1.3       pazsan     21: # To change the values of `make' variables: instead of editing Makefiles,
                     22: # (1) if the variable is set in `config.status', edit `config.status'
                     23: #     (which will cause the Makefiles to be regenerated when you run `make');
                     24: # (2) otherwise, pass the desired values on the `make' command line.
                     25: 
                     26: #To do:
                     27: #use $(srcdir) to make compilation in a non-srcdir possible
                     28: 
1.7       anton      29: VERSION        =0.1beta#gforth version
1.3       pazsan     30: SHELL  = command.com
                     31: RM     = del
1.1       pazsan     32: CP     = copy
1.3       pazsan     33: INSTALL        = install-sh
                     34: INSTALL_PROGRAM = install-sh
                     35: INSTALL_DATA = install-sh
1.13    ! anton      36: INSTALL_DIR = ./install-sh -d
1.3       pazsan     37: LN_S   = copy
1.12      pazsan     38: GCC    = gcc
1.4       pazsan     39: CC     = $(GCC)
1.1       pazsan     40: FORTH  = gforth
1.12      pazsan     41: FORTHK = $(FORTH) -i ./kernal.fi
1.4       pazsan     42: STRIP  = strip
1.7       anton      43: TEXI2DVI = texi2dvi
1.8       anton      44: DVI2PS = dvips -D300
1.4       pazsan     45: #you can get texi2html from http://asis01.cern.ch/infohtml/texi2html.html
                     46: TEXI2HTML = texi2html
1.3       pazsan     47: MAKEINFO = makeinfo
1.4       pazsan     48: XCFLAGS        = -fforce-mem -fforce-addr -fomit-frame-pointer
1.5       pazsan     49: XDEFINES = 
1.3       pazsan     50: SWITCHES = $(XCFLAGS) $(XDEFINES) #-DNDEBUG #turn off assertions
1.4       pazsan     51: ENGINE_FLAGS =  -fno-defer-pop -fcaller-saves
                     52: DEBUGFLAG = 
1.7       anton      53: CFLAGS = $(DEBUGFLAG) -O4 -Wall $(SWITCHES) -DDEFAULTPATH=\".\"
1.1       pazsan     54: 
                     55: #John Wavrik should use -Xlinker -N to get a writable text (executable)
1.4       pazsan     56: XLDFLAGS = 
                     57: GCCLDFLAGS = 
                     58: LDFLAGS        =  $(DEBUGFLAG) $(XLDFLAGS) $(GCCLDFLAGS)
1.3       pazsan     59: LDLIBS = -lm -lpc
                     60: 
1.4       pazsan     61: prefix = 
                     62: exec_prefix = 
                     63: srcdir = 
                     64: bindir = $(exec_prefix)/bin
1.3       pazsan     65: #read-only architecture-independent files
1.4       pazsan     66: datadir = $(prefix)/share
1.3       pazsan     67: #read-only architecture-dependent non-ascii files
1.4       pazsan     68: libdir = $(prefix)/lib
                     69: infodir = $(prefix)/info
                     70: mandir = $(prefix)/man/man1
1.1       pazsan     71: 
                     72: 
1.7       anton      73: INCLUDES = forth.h threading.h io.h io-dos.h
1.1       pazsan     74: 
1.4       pazsan     75: KERN_SRC = main.fs search-order.fs cross.fs aliases.fs vars.fs add.fs \
                     76:        errore.fs kernal.fs version.fs extend.fs tools.fs toolsext.fs
                     77: 
1.7       anton      78: FORTH_SRC = anslocal.fs add.fs assert.fs ansi.fs answords.fs blocks.fs bufio.fs checkans.fs \
                     79:        code.fs colorize.fs cross.fs debug.fs debugging.fs doskey.fs ds2texi.fs \
1.2       pazsan     80:        dumpimage.fs environ.fs errore.fs etags.fs extend.fs filedump.fs \
                     81:        float.fs glocals.fs glosgen.fs gray.fs hash.fs history.fs \
1.4       pazsan     82:        kernal.fs locals-test.fs look.fs main.fs makedoc.fs \
1.13    ! anton      83:        mach16b.fs mach16l.fs mach32b.fs mach32l.fs mach64b.fs mach64l.fs \
1.7       anton      84:        other.fs prims2x.fs random.fs search-order.fs see.fs sieve.fs source.fs \
1.9       anton      85:        startup.fs site-init.fs struct.fs tools.fs toolsext.fs tt.fs vars.fs \
                     86:        vt100.fs vt100key.fs wordinfo.fs wordsets.fs \
1.8       anton      87:        tester.fs coretest.fs \
                     88:        bubble.fs siev.fs matrix.fs fib.fs
1.2       pazsan     89: 
1.13    ! anton      90: SOURCES        = CVS Makefile.in configure.in configure config.sub  config.guess \
1.9       anton      91:        install-sh INSTALL README ToDo BUGS model COPYING Benchres \
1.4       pazsan     92:        gforth.ds texinfo.tex gforth.1 gforth.el \
1.2       pazsan     93:        primitives engine.c main.c io.c \
1.3       pazsan     94:        m68k.h mips.h 386.h hppa.h cache.c sparc.h power.h alpha.h 32bit.h \
                     95:        getopt.c getopt1.c getopt.h select.c \
1.4       pazsan     96:        ecvt.c memcmp.c strtol.c strtoul.c ansidecl.h memmove.c pow10.c \
1.7       anton      97:        strerror.c strsignal.c \
1.12      pazsan     98:        INSTALL.DOS makefile.dos mkdosmf.sed configure.bat \
                     99:        startup.dos history.dos \
1.2       pazsan    100:        glosgen.glo glossaries.doc \
                    101:        $(INCLUDES) $(FORTH_SRC)
1.1       pazsan    102: 
1.2       pazsan    103: RCS_FILES =  ToDo model high-level
1.1       pazsan    104: 
1.12      pazsan    105: GEN = gforth version.fs
1.1       pazsan    106: 
1.12      pazsan    107: OBJECTS        = engine.o main.o ecvt.o select.o strsignal.o getopt.o getopt1.o
1.1       pazsan    108: 
                    109: # things that need a working forth system to be generated
1.4       pazsan    110: FORTH_GEN0 = primitives.b primitives.i prim_labels.i aliases.fs
1.7       anton     111: FORTH_GEN =  $(FORTH_GEN0) kernl16l.fi kernl16b.fi kernl32l.fi kernl32b.fi kernl64l.fi kernl64b.fi gforth.fi
1.1       pazsan    112: # this is used for antidependences,
1.12      pazsan    113: FORTH_GEN1 = $(FORTH_GEN0) kernl32l.fi 
1.4       pazsan    114: 
1.7       anton     115: #distributed documentation
                    116: DOCDIST = gforth.texi gforth.fns gforth.ps gforth.info*
1.2       pazsan    117: 
1.12      pazsan    118: KERNLS = kernl16b.fi- kernl16l.fi- \
                    119:         kernl32b.fi- kernl32l.fi- \
                    120:         kernl64b.fi- kernl64l.fi-
1.3       pazsan    121: 
1.4       pazsan    122: GEN_PRECIOUS = $(FORTH_GEN) $(KERNLS) gforth.texi gforth.dvi gforth.ps Makefile configure
1.1       pazsan    123: 
1.3       pazsan    124: #standards.info recommends this:
                    125: .SUFFIXES:
                    126: .SUFFIXES: .c .o
1.2       pazsan    127: 
1.12      pazsan    128: all:   version.fs more
1.1       pazsan    129: 
1.12      pazsan    130: version.c:     Makefile.in
                    131:                echo char gforth_version[]="$(VERSION)" ; >$@
                    132: 
                    133: version.fs:    Makefile.in
                    134:                $(MAKE) gforth
                    135:                echo : version-string s" $(VERSION)" ; >$@
1.1       pazsan    136: 
                    137: more:  $(FORTH_GEN) gforth
                    138: 
                    139: #from the gcc Makefile: 
                    140: #"Deletion of files made during compilation.
                    141: # There are four levels of this:
                    142: #   `mostlyclean', `clean', `distclean' and `realclean'.
                    143: # `mostlyclean' is useful while working on a particular type of machine.
                    144: # It deletes most, but not all, of the files made by compilation.
                    145: # It does not delete libgcc.a or its parts, so it won't have to be recompiled.
                    146: # `clean' deletes everything made by running `make all'.
                    147: # `distclean' also deletes the files made by config.
                    148: # `realclean' also deletes everything that could be regenerated automatically."
                    149: 
1.11      anton     150: mostlyclean:
1.12      pazsan    151:                -$(RM) -rf *.s gforth.fi *.fi~ *.fi- version.fs TAGS \
1.11      anton     152:                crossdoc.fd doc.fd gforth.aux gforth.cp gforth.cps \
                    153:                gforth.dvi gforth.fn gforth.ky gforth.log gforth.pg \
                    154:                gforth.toc gforth.tp gforth.vr html 
                    155: 
                    156: clean:         mostlyclean
                    157:                -$(RM) -rf $(GEN) *.o 
1.1       pazsan    158: 
                    159: distclean:     clean
1.10      anton     160:                -$(RM) machine.h kernal.fi config.cache config.log config.status Makefile
1.1       pazsan    161: 
                    162: realclean:     distclean
                    163:                -$(RM) $(GEN_PRECIOUS)
                    164: 
1.11      anton     165: #mostlyclean, but also remove some of the stuff that is distributed
                    166: virtualclean:  mostlyclean
                    167:                -$(RM) -rf gforth.fns gforth.texi gforth.ps gforth.info* \
                    168:                gforth-$(VERSION).tar.gz config.cache *~
                    169: 
1.7       anton     170: dist:          $(SOURCES) $(FORTH_GEN) $(DOCDIST)
1.4       pazsan    171:                -rm -rf gforth-$(VERSION)
                    172:                mkdir gforth-$(VERSION)
1.13    ! anton     173:                $(CP) -rp $(SOURCES) $(FORTH_GEN0) kernl16l.fi kernl16b.fi kernl32l.fi kernl32b.fi kernl64l.fi kernl64b.fi $(DOCDIST) gforth-$(VERSION)
1.4       pazsan    174:                tar cvf - gforth-$(VERSION)|gzip -9 >gforth-$(VERSION).tar.gz
                    175:                -rm -rf gforth-$(VERSION)
                    176: 
                    177: #a binary distribution contains the complete source distribution,
                    178: # the objects, the executable and the links. the objects are there for making
                    179: # make happy.
                    180: bindist:       $(SOURCES) $(FORTH_GEN) gforth $(OBJECTS) config.status Makefile
                    181:                -rm -rf gforth-$(VERSION)
                    182:                mkdir gforth-$(VERSION)
1.13    ! anton     183:                $(CP) -rp -d $(SOURCES) config.status Makefile $(FORTH_GEN) gforth $(OBJECTS) machine.h kernal.fi gforth-$(VERSION)
1.4       pazsan    184:                strip gforth-$(VERSION)/gforth
                    185:                tar cvf - gforth-$(VERSION)|gzip -9 >gforth-$(VERSION)-dos.tar.gz
                    186: 
                    187: #makes a package with only the stuff not present in the source
                    188: #package. For installation the source package is still needed!
                    189: #This is useful if you want to distribute many binary versions in
                    190: #little space (e.g., on floppy disk): Put the source package and
                    191: #all the binonly packages you are interested in on the disk. The user
                    192: #then just has to unpack the source and his favourite binonly into the
                    193: #same directory and has a full binary distribution.
                    194: binonlydist:   $(SOURCES) $(FORTH_GEN) gforth $(OBJECTS)
                    195:                -rm -rf gforth-$(VERSION)
                    196:                mkdir gforth-$(VERSION)
1.13    ! anton     197:                $(CP) -p -d  config.status Makefile gforth $(OBJECTS) machine.h kernal.fi gforth-$(VERSION)
1.4       pazsan    198:                strip gforth-$(VERSION)/gforth
                    199:                tar cvf - gforth-$(VERSION)|gzip -9 >gforth-$(VERSION)-binonly-dos.tar.gz
                    200: 
                    201: 
1.2       pazsan    202: 
1.4       pazsan    203: #strip gforth, because the debugging stuff is hardly useful once
                    204: # gforth manages to execute more than a few primitives
                    205: 
1.13    ! anton     206: install:       gforth $(FORTH_SRC) kernal.fi gforth.fi gforth.1 gforth.info*
        !           207:                for i in $(bindir) $(mandir) $(infodir) $(libdir)/gforth/$(VERSION) $(datadir)/gforth/$(VERSION) $(libdir)/gforth/site-forth $(datadir)/gforth/site-forth; do \
        !           208:                        $(INSTALL_DIR) $$i; \
        !           209:                done
1.9       anton     210:                touch $(datadir)/gforth/site-forth/site-init.fs
1.13    ! anton     211:                -$(RM) $(bindir)/gforth $(bindir)/gforth-$(VERSION)
1.4       pazsan    212:                $(INSTALL_PROGRAM) -s gforth $(bindir)
1.13    ! anton     213:                ln $(bindir)/gforth $(bindir)/gforth-$(VERSION)
1.3       pazsan    214:                $(INSTALL_DATA) gforth.1 $(mandir)
1.13    ! anton     215:                for i in gforth.info*; do $(INSTALL_DATA) $$i $(infodir); done
1.3       pazsan    216:                for i in $(FORTH_SRC); do \
1.4       pazsan    217:                        $(INSTALL_DATA) $$i $(datadir)/gforth/$(VERSION); \
1.3       pazsan    218:                done
1.12      pazsan    219:                $(INSTALL_DATA) kernal.fi $(libdir)/gforth/$(VERSION)
                    220:                $(FORTHK) startup.fs dumpimage.fs -e "savesystem $(libdir)/gforth/$(VERSION)/gforth.fi bye" #gforth.fi contains some path names
1.4       pazsan    221: 
1.8       anton     222: 
                    223: #deinstall all files specific to this version of gforth
                    224: #to uninstall version foo, type `make uninstall VERSION=foo'
                    225: uninstall:     
                    226:                -$(RM) -rf $(libdir)/gforth/$(VERSION) $(datadir)/gforth/$(VERSION) $(bindir)/gforth-$(VERSION)
1.9       anton     227:                @echo -e "Type\n$(RM) -rf $(bindir)/gforth $(mandir)/gforth.1 $(infodir)/gforth.info* $(datadir)/gforth $(libdir)/gforth\nto remove Gforth completely"
1.8       anton     228: 
1.4       pazsan    229: check:         test
                    230:                touch test
                    231: 
1.12      pazsan    232: test:          gforth gforth.fi
1.4       pazsan    233:                $(FORTH) tester.fs coretest.fs -e bye
1.7       anton     234:                $(FORTH) code.fs checkans.fs -e bye
1.4       pazsan    235:                @echo 'Expect no differences'
                    236:                $(FORTH) prims2x.fs -e "s\" primitives.b\" ' output-c process-file bye"| diff -c - primitives.i
                    237: 
1.12      pazsan    238: bench:         gforth gforth.fi
1.8       anton     239:                @echo 'Each benchmark takes about 30s on a 486-66 (gcc-2.6.3 -DFORCE_REG)'
1.9       anton     240:                time $(FORTH) siev.fs -e "main bye"
                    241:                time $(FORTH) bubble.fs -e "main bye"
                    242:                time $(FORTH) -m 160000 matrix.fs -e "main bye"
                    243:                time $(FORTH) fib.fs -e "main bye"
1.8       anton     244: 
1.3       pazsan    245: dvi:           gforth.dvi
1.1       pazsan    246: 
1.4       pazsan    247: gforth:                $(OBJECTS)
1.1       pazsan    248:                -$(CP) gforth gforth~
                    249:                $(GCC) $(LDFLAGS) $(OBJECTS) $(LDLIBS) -o $@
1.4       pazsan    250:                coff2exe $@
1.1       pazsan    251: 
1.12      pazsan    252: kernl16l.fi-:  $(KERN_SRC) mach16l.fs $(FORTH_GEN0)
1.11      anton     253:                $(FORTHK) -p . -e 's" mach16l.fs"' main.fs
1.3       pazsan    254: 
1.12      pazsan    255: kernl16b.fi-:  $(KERN_SRC) mach16b.fs $(FORTH_GEN0)
1.11      anton     256:                $(FORTHK) -p . -e 's" mach16b.fs"' main.fs
1.3       pazsan    257: 
1.12      pazsan    258: kernl32l.fi-:  $(KERN_SRC) mach32l.fs $(FORTH_GEN0)
1.11      anton     259:                $(FORTHK) -p . -e 's" mach32l.fs"' main.fs
1.1       pazsan    260: 
1.12      pazsan    261: kernl32b.fi-:  $(KERN_SRC) mach32b.fs $(FORTH_GEN0)
1.11      anton     262:                $(FORTHK) -p . -e 's" mach32b.fs"' main.fs
1.3       pazsan    263: 
1.12      pazsan    264: kernl64l.fi-:  $(KERN_SRC) mach64l.fs $(FORTH_GEN0)
1.11      anton     265:                $(FORTHK) -p . -e 's" mach64l.fs"' main.fs
1.1       pazsan    266: 
1.12      pazsan    267: kernl64b.fi-:  $(KERN_SRC) mach64b.fs $(FORTH_GEN0)
1.11      anton     268:                $(FORTHK) -p . -e 's" mach64b.fs"' main.fs
1.4       pazsan    269: 
                    270: kernl16b.fi:   $(KERNLS)
1.6       pazsan    271:                -$(CP) kernl16b.fi kernl16b.fi~
1.12      pazsan    272:                -$(CP) kernl16b.fi- kernl16b.fi
1.4       pazsan    273:                
                    274: 
                    275: kernl16l.fi:   $(KERNLS)
1.6       pazsan    276:                -$(CP) kernl16l.fi kernl16l.fi~
1.12      pazsan    277:                -$(CP) kernl16l.fi- kernl16l.fi
1.4       pazsan    278:                
                    279: 
                    280: kernl32b.fi:   $(KERNLS)
1.6       pazsan    281:                -$(CP) kernl32b.fi kernl32b.fi~
1.12      pazsan    282:                -$(CP) kernl32b.fi- kernl32b.fi
1.4       pazsan    283:                
                    284: 
                    285: kernl32l.fi:   $(KERNLS)
1.6       pazsan    286:                -$(CP) kernl32l.fi kernl32l.fi~
1.12      pazsan    287:                -$(CP) kernl32l.fi- kernl32l.fi
                    288:                -$(CP) kernl32l.fi kernal.fi
1.4       pazsan    289: 
                    290: kernl64b.fi:   $(KERNLS)
1.6       pazsan    291:                -$(CP) kernl64b.fi kernl64b.fi~
1.12      pazsan    292:                -$(CP) kernl64b.fi- kernl64b.fi
1.4       pazsan    293:                
                    294: 
                    295: kernl64l.fi:   $(KERNLS)
1.6       pazsan    296:                -$(CP) kernl64l.fi kernl64l.fi~
1.12      pazsan    297:                -$(CP) kernl64l.fi- kernl64l.fi
1.3       pazsan    298:                
1.2       pazsan    299: 
1.12      pazsan    300: gforth.fi:     kernl32l.fi gforth startup.fs glocals.fs search-order.fs hash.fs float.fs debugging.fs environ.fs wordinfo.fs look.fs vt100.fs see.fs bufio.fs debug.fs history.fs vt100key.fs assert.fs source.fs blocks.fs struct.fs dumpimage.fs
1.7       anton     301:                $(FORTHK) startup.fs dumpimage.fs -e "savesystem gforth.fi bye"
                    302: 
                    303: engine.s:      engine.c primitives.i prim_labels.i machine.h threading.h $(INCLUDES)
1.3       pazsan    304:                $(GCC) $(CFLAGS) $(ENGINE_FLAGS) -S engine.c
1.1       pazsan    305: 
1.7       anton     306: engine.o:      engine.c primitives.i prim_labels.i machine.h threading.h $(INCLUDES)
1.3       pazsan    307:                $(GCC) $(CFLAGS) $(ENGINE_FLAGS) -c engine.c
                    308: 
1.7       anton     309: main.o:                main.c machine.h threading.h $(INCLUDES)
                    310:                $(GCC) $(CFLAGS) $(ENGINE_FLAGS) -c main.c
                    311: 
1.3       pazsan    312: strtoul.o:     strtoul.c strtol.c
1.1       pazsan    313: 
                    314: primitives.b:  primitives
                    315:                m4 primitives >$@ 
                    316: 
                    317: primitives.i : primitives.b prims2x.fs
1.11      anton     318:                $(FORTHK) -p . prims2x.fs -e "s\" primitives.b\" ' output-c process-file bye" >$@
1.1       pazsan    319: 
                    320: prim_labels.i :        primitives.b prims2x.fs
1.11      anton     321:                $(FORTHK) -p . prims2x.fs -e "s\" primitives.b\" ' output-label process-file bye" >$@
1.1       pazsan    322: 
                    323: aliases.fs:    primitives.b prims2x.fs
1.11      anton     324:                $(FORTHK) -p . prims2x.fs -e "s\" primitives.b\" ' output-alias process-file bye" >$@
1.1       pazsan    325: 
                    326: primitives.fs: primitives.b prims2x.fs
1.11      anton     327:                $(FORTHK) -p . prims2x.fs -e "s\" primitives.b\" ' output-forth process-file bye" >$@
1.1       pazsan    328: 
1.4       pazsan    329: 
                    330: doc.fd:                makedoc.fs float.fs search-order.fs glocals.fs environ.fs \
                    331:                 toolsext.fs wordinfo.fs \
                    332:                 vt100.fs colorize.fs see.fs bufio.fs debug.fs history.fs \
1.7       anton     333:                 doskey.fs vt100key.fs startup.fs assert.fs debugging.fs code.fs
1.11      anton     334:                $(FORTHK) -p . -e "s\" doc.fd\"" makedoc.fs startup.fs code.fs -e bye
1.7       anton     335: 
                    336: crossdoc.fd:   $(KERN_SRC) $(FORTH_GEN0)
1.11      anton     337:                $(FORTHK) -p . -e 's" mach32l.fs"' main.fs
1.4       pazsan    338: 
                    339: gforth.texi:   gforth.ds primitives.b ds2texi.fs prims2x.fs doc.fd crossdoc.fd
1.11      anton     340:                $(FORTHK) -p . ds2texi.fs -e "s\" gforth.ds\" r/o open-file throw ds2texi bye" >$@
1.7       anton     341: 
                    342: checkdoc:      gforth.ds primitives.b ds2texi.fs prims2x.fs doc.fd crossdoc.fd answords.fs
1.11      anton     343:                $(FORTHK) -p . ds2texi.fs answords.fs -e bye
1.1       pazsan    344: 
1.11      anton     345: gforth.dvi gforth.fns: gforth.texi
1.3       pazsan    346:                $(TEXI2DVI) gforth.texi
1.1       pazsan    347: 
1.2       pazsan    348: gforth.ps:     gforth.dvi
1.3       pazsan    349:                $(DVI2PS) gforth.dvi -o $@
1.8       anton     350: 
1.13    ! anton     351: gforth.info*:  gforth.texi
1.3       pazsan    352:                -$(MAKEINFO) gforth.texi
1.1       pazsan    353: 
1.4       pazsan    354: html:          gforth.texi
                    355:                -$(RM) html/*
                    356:                -mkdir html
                    357:                cd html; $(TEXI2HTML) -menu -split_node ../gforth.texi
                    358: 
1.3       pazsan    359: # For an explanation of the following Makefile rules, see node
                    360: # `Automatic Remaking' in GNU Autoconf documentation.
                    361: Makefile: Makefile.in config.status
                    362:        CONFIG_FILES=$@ CONFIG_HEADERS= ./config.status
                    363: config.status: configure
                    364:        ./config.status --recheck
                    365: configure: configure.in
                    366:        cd $(srcdir) && autoconf
                    367: 
1.4       pazsan    368: makefile.dos: mkdosmf.sed Makefile.in
                    369:        sed -f mkdosmf.sed <Makefile.in >makefile.dos
1.12      pazsan    370: 
                    371: history.dos: history.fs Makefile.in
                    372:        sed -e "s,~/\.gforth-history,/gforth.his,g" <history.fs >history.dos
1.6       pazsan    373: 
                    374: startup.dos: startup.fs Makefile.in
                    375:        sed -e "s/\\\\ include doskey/include doskey/g" \
1.11      anton     376:            -e "s/include vt100key/\\\\ include vt100key/g" <startup.fs >startup.dos

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>