File:  [gforth] / gforth / Attic / gforth.ds
Revision 1.28: download - view: text, annotated - select for diffs
Sat Dec 23 16:21:57 1995 UTC (25 years, 7 months ago) by anton
Branches: MAIN
CVS tags: HEAD
Improved etags support
prims2x now supports synclines ("#line ...")
improved strsignal replacement

    1: \input texinfo   @c -*-texinfo-*-
    2: @comment The source is gforth.ds, from which gforth.texi is generated
    3: @comment %**start of header (This is for running Texinfo on a region.)
    4: @setfilename
    5: @settitle Gforth Manual
    6: @comment @setchapternewpage odd
    7: @comment %**end of header (This is for running Texinfo on a region.)
    9: @ifinfo
   10: This file documents Gforth 0.1
   12: Copyright @copyright{} 1995 Free Software Foundation, Inc.
   14:      Permission is granted to make and distribute verbatim copies of
   15:      this manual provided the copyright notice and this permission notice
   16:      are preserved on all copies.
   18: @ignore
   19:      Permission is granted to process this file through TeX and print the
   20:      results, provided the printed document carries a copying permission
   21:      notice identical to this one except for the removal of this paragraph
   22:      (this paragraph not being relevant to the printed manual).
   24: @end ignore
   25:      Permission is granted to copy and distribute modified versions of this
   26:      manual under the conditions for verbatim copying, provided also that the
   27:      sections entitled "Distribution" and "General Public License" are
   28:      included exactly as in the original, and provided that the entire
   29:      resulting derived work is distributed under the terms of a permission
   30:      notice identical to this one.
   32:      Permission is granted to copy and distribute translations of this manual
   33:      into another language, under the above conditions for modified versions,
   34:      except that the sections entitled "Distribution" and "General Public
   35:      License" may be included in a translation approved by the author instead
   36:      of in the original English.
   37: @end ifinfo
   39: @finalout
   40: @titlepage
   41: @sp 10
   42: @center @titlefont{Gforth Manual}
   43: @sp 2
   44: @center for version 0.1
   45: @sp 2
   46: @center Anton Ertl
   47: @center Bernd Paysan
   48: @sp 3
   49: @center This manual is under construction
   51: @comment  The following two commands start the copyright page.
   52: @page
   53: @vskip 0pt plus 1filll
   54: Copyright @copyright{} 1995 Free Software Foundation, Inc.
   56: @comment !! Published by ... or You can get a copy of this manual ...
   58:      Permission is granted to make and distribute verbatim copies of
   59:      this manual provided the copyright notice and this permission notice
   60:      are preserved on all copies.
   62:      Permission is granted to copy and distribute modified versions of this
   63:      manual under the conditions for verbatim copying, provided also that the
   64:      sections entitled "Distribution" and "General Public License" are
   65:      included exactly as in the original, and provided that the entire
   66:      resulting derived work is distributed under the terms of a permission
   67:      notice identical to this one.
   69:      Permission is granted to copy and distribute translations of this manual
   70:      into another language, under the above conditions for modified versions,
   71:      except that the sections entitled "Distribution" and "General Public
   72:      License" may be included in a translation approved by the author instead
   73:      of in the original English.
   74: @end titlepage
   77: @node Top, License, (dir), (dir)
   78: @ifinfo
   79: Gforth is a free implementation of ANS Forth available on many
   80: personal machines. This manual corresponds to version 0.1.
   81: @end ifinfo
   83: @menu
   84: * License::                     
   85: * Goals::                       About the Gforth Project
   86: * Other Books::                 Things you might want to read
   87: * Invocation::                  Starting Gforth
   88: * Words::                       Forth words available in Gforth
   89: * ANS conformance::             Implementation-defined options etc.
   90: * Model::                       The abstract machine of Gforth
   91: * Emacs and Gforth::            The Gforth Mode
   92: * Internals::                   Implementation details
   93: * Bugs::                        How to report them
   94: * Pedigree::                    Ancestors of Gforth
   95: * Word Index::                  An item for each Forth word
   96: * Node Index::                  An item for each node
   97: @end menu
   99: @node License, Goals, Top, Top
  101: @center Version 2, June 1991
  103: @display
  104: Copyright @copyright{} 1989, 1991 Free Software Foundation, Inc.
  105: 675 Mass Ave, Cambridge, MA 02139, USA
  107: Everyone is permitted to copy and distribute verbatim copies
  108: of this license document, but changing it is not allowed.
  109: @end display
  111: @unnumberedsec Preamble
  113:   The licenses for most software are designed to take away your
  114: freedom to share and change it.  By contrast, the GNU General Public
  115: License is intended to guarantee your freedom to share and change free
  116: software---to make sure the software is free for all its users.  This
  117: General Public License applies to most of the Free Software
  118: Foundation's software and to any other program whose authors commit to
  119: using it.  (Some other Free Software Foundation software is covered by
  120: the GNU Library General Public License instead.)  You can apply it to
  121: your programs, too.
  123:   When we speak of free software, we are referring to freedom, not
  124: price.  Our General Public Licenses are designed to make sure that you
  125: have the freedom to distribute copies of free software (and charge for
  126: this service if you wish), that you receive source code or can get it
  127: if you want it, that you can change the software or use pieces of it
  128: in new free programs; and that you know you can do these things.
  130:   To protect your rights, we need to make restrictions that forbid
  131: anyone to deny you these rights or to ask you to surrender the rights.
  132: These restrictions translate to certain responsibilities for you if you
  133: distribute copies of the software, or if you modify it.
  135:   For example, if you distribute copies of such a program, whether
  136: gratis or for a fee, you must give the recipients all the rights that
  137: you have.  You must make sure that they, too, receive or can get the
  138: source code.  And you must show them these terms so they know their
  139: rights.
  141:   We protect your rights with two steps: (1) copyright the software, and
  142: (2) offer you this license which gives you legal permission to copy,
  143: distribute and/or modify the software.
  145:   Also, for each author's protection and ours, we want to make certain
  146: that everyone understands that there is no warranty for this free
  147: software.  If the software is modified by someone else and passed on, we
  148: want its recipients to know that what they have is not the original, so
  149: that any problems introduced by others will not reflect on the original
  150: authors' reputations.
  152:   Finally, any free program is threatened constantly by software
  153: patents.  We wish to avoid the danger that redistributors of a free
  154: program will individually obtain patent licenses, in effect making the
  155: program proprietary.  To prevent this, we have made it clear that any
  156: patent must be licensed for everyone's free use or not licensed at all.
  158:   The precise terms and conditions for copying, distribution and
  159: modification follow.
  161: @iftex
  163: @end iftex
  164: @ifinfo
  166: @end ifinfo
  168: @enumerate 0
  169: @item
  170: This License applies to any program or other work which contains
  171: a notice placed by the copyright holder saying it may be distributed
  172: under the terms of this General Public License.  The ``Program'', below,
  173: refers to any such program or work, and a ``work based on the Program''
  174: means either the Program or any derivative work under copyright law:
  175: that is to say, a work containing the Program or a portion of it,
  176: either verbatim or with modifications and/or translated into another
  177: language.  (Hereinafter, translation is included without limitation in
  178: the term ``modification''.)  Each licensee is addressed as ``you''.
  180: Activities other than copying, distribution and modification are not
  181: covered by this License; they are outside its scope.  The act of
  182: running the Program is not restricted, and the output from the Program
  183: is covered only if its contents constitute a work based on the
  184: Program (independent of having been made by running the Program).
  185: Whether that is true depends on what the Program does.
  187: @item
  188: You may copy and distribute verbatim copies of the Program's
  189: source code as you receive it, in any medium, provided that you
  190: conspicuously and appropriately publish on each copy an appropriate
  191: copyright notice and disclaimer of warranty; keep intact all the
  192: notices that refer to this License and to the absence of any warranty;
  193: and give any other recipients of the Program a copy of this License
  194: along with the Program.
  196: You may charge a fee for the physical act of transferring a copy, and
  197: you may at your option offer warranty protection in exchange for a fee.
  199: @item
  200: You may modify your copy or copies of the Program or any portion
  201: of it, thus forming a work based on the Program, and copy and
  202: distribute such modifications or work under the terms of Section 1
  203: above, provided that you also meet all of these conditions:
  205: @enumerate a
  206: @item
  207: You must cause the modified files to carry prominent notices
  208: stating that you changed the files and the date of any change.
  210: @item
  211: You must cause any work that you distribute or publish, that in
  212: whole or in part contains or is derived from the Program or any
  213: part thereof, to be licensed as a whole at no charge to all third
  214: parties under the terms of this License.
  216: @item
  217: If the modified program normally reads commands interactively
  218: when run, you must cause it, when started running for such
  219: interactive use in the most ordinary way, to print or display an
  220: announcement including an appropriate copyright notice and a
  221: notice that there is no warranty (or else, saying that you provide
  222: a warranty) and that users may redistribute the program under
  223: these conditions, and telling the user how to view a copy of this
  224: License.  (Exception: if the Program itself is interactive but
  225: does not normally print such an announcement, your work based on
  226: the Program is not required to print an announcement.)
  227: @end enumerate
  229: These requirements apply to the modified work as a whole.  If
  230: identifiable sections of that work are not derived from the Program,
  231: and can be reasonably considered independent and separate works in
  232: themselves, then this License, and its terms, do not apply to those
  233: sections when you distribute them as separate works.  But when you
  234: distribute the same sections as part of a whole which is a work based
  235: on the Program, the distribution of the whole must be on the terms of
  236: this License, whose permissions for other licensees extend to the
  237: entire whole, and thus to each and every part regardless of who wrote it.
  239: Thus, it is not the intent of this section to claim rights or contest
  240: your rights to work written entirely by you; rather, the intent is to
  241: exercise the right to control the distribution of derivative or
  242: collective works based on the Program.
  244: In addition, mere aggregation of another work not based on the Program
  245: with the Program (or with a work based on the Program) on a volume of
  246: a storage or distribution medium does not bring the other work under
  247: the scope of this License.
  249: @item
  250: You may copy and distribute the Program (or a work based on it,
  251: under Section 2) in object code or executable form under the terms of
  252: Sections 1 and 2 above provided that you also do one of the following:
  254: @enumerate a
  255: @item
  256: Accompany it with the complete corresponding machine-readable
  257: source code, which must be distributed under the terms of Sections
  258: 1 and 2 above on a medium customarily used for software interchange; or,
  260: @item
  261: Accompany it with a written offer, valid for at least three
  262: years, to give any third party, for a charge no more than your
  263: cost of physically performing source distribution, a complete
  264: machine-readable copy of the corresponding source code, to be
  265: distributed under the terms of Sections 1 and 2 above on a medium
  266: customarily used for software interchange; or,
  268: @item
  269: Accompany it with the information you received as to the offer
  270: to distribute corresponding source code.  (This alternative is
  271: allowed only for noncommercial distribution and only if you
  272: received the program in object code or executable form with such
  273: an offer, in accord with Subsection b above.)
  274: @end enumerate
  276: The source code for a work means the preferred form of the work for
  277: making modifications to it.  For an executable work, complete source
  278: code means all the source code for all modules it contains, plus any
  279: associated interface definition files, plus the scripts used to
  280: control compilation and installation of the executable.  However, as a
  281: special exception, the source code distributed need not include
  282: anything that is normally distributed (in either source or binary
  283: form) with the major components (compiler, kernel, and so on) of the
  284: operating system on which the executable runs, unless that component
  285: itself accompanies the executable.
  287: If distribution of executable or object code is made by offering
  288: access to copy from a designated place, then offering equivalent
  289: access to copy the source code from the same place counts as
  290: distribution of the source code, even though third parties are not
  291: compelled to copy the source along with the object code.
  293: @item
  294: You may not copy, modify, sublicense, or distribute the Program
  295: except as expressly provided under this License.  Any attempt
  296: otherwise to copy, modify, sublicense or distribute the Program is
  297: void, and will automatically terminate your rights under this License.
  298: However, parties who have received copies, or rights, from you under
  299: this License will not have their licenses terminated so long as such
  300: parties remain in full compliance.
  302: @item
  303: You are not required to accept this License, since you have not
  304: signed it.  However, nothing else grants you permission to modify or
  305: distribute the Program or its derivative works.  These actions are
  306: prohibited by law if you do not accept this License.  Therefore, by
  307: modifying or distributing the Program (or any work based on the
  308: Program), you indicate your acceptance of this License to do so, and
  309: all its terms and conditions for copying, distributing or modifying
  310: the Program or works based on it.
  312: @item
  313: Each time you redistribute the Program (or any work based on the
  314: Program), the recipient automatically receives a license from the
  315: original licensor to copy, distribute or modify the Program subject to
  316: these terms and conditions.  You may not impose any further
  317: restrictions on the recipients' exercise of the rights granted herein.
  318: You are not responsible for enforcing compliance by third parties to
  319: this License.
  321: @item
  322: If, as a consequence of a court judgment or allegation of patent
  323: infringement or for any other reason (not limited to patent issues),
  324: conditions are imposed on you (whether by court order, agreement or
  325: otherwise) that contradict the conditions of this License, they do not
  326: excuse you from the conditions of this License.  If you cannot
  327: distribute so as to satisfy simultaneously your obligations under this
  328: License and any other pertinent obligations, then as a consequence you
  329: may not distribute the Program at all.  For example, if a patent
  330: license would not permit royalty-free redistribution of the Program by
  331: all those who receive copies directly or indirectly through you, then
  332: the only way you could satisfy both it and this License would be to
  333: refrain entirely from distribution of the Program.
  335: If any portion of this section is held invalid or unenforceable under
  336: any particular circumstance, the balance of the section is intended to
  337: apply and the section as a whole is intended to apply in other
  338: circumstances.
  340: It is not the purpose of this section to induce you to infringe any
  341: patents or other property right claims or to contest validity of any
  342: such claims; this section has the sole purpose of protecting the
  343: integrity of the free software distribution system, which is
  344: implemented by public license practices.  Many people have made
  345: generous contributions to the wide range of software distributed
  346: through that system in reliance on consistent application of that
  347: system; it is up to the author/donor to decide if he or she is willing
  348: to distribute software through any other system and a licensee cannot
  349: impose that choice.
  351: This section is intended to make thoroughly clear what is believed to
  352: be a consequence of the rest of this License.
  354: @item
  355: If the distribution and/or use of the Program is restricted in
  356: certain countries either by patents or by copyrighted interfaces, the
  357: original copyright holder who places the Program under this License
  358: may add an explicit geographical distribution limitation excluding
  359: those countries, so that distribution is permitted only in or among
  360: countries not thus excluded.  In such case, this License incorporates
  361: the limitation as if written in the body of this License.
  363: @item
  364: The Free Software Foundation may publish revised and/or new versions
  365: of the General Public License from time to time.  Such new versions will
  366: be similar in spirit to the present version, but may differ in detail to
  367: address new problems or concerns.
  369: Each version is given a distinguishing version number.  If the Program
  370: specifies a version number of this License which applies to it and ``any
  371: later version'', you have the option of following the terms and conditions
  372: either of that version or of any later version published by the Free
  373: Software Foundation.  If the Program does not specify a version number of
  374: this License, you may choose any version ever published by the Free Software
  375: Foundation.
  377: @item
  378: If you wish to incorporate parts of the Program into other free
  379: programs whose distribution conditions are different, write to the author
  380: to ask for permission.  For software which is copyrighted by the Free
  381: Software Foundation, write to the Free Software Foundation; we sometimes
  382: make exceptions for this.  Our decision will be guided by the two goals
  383: of preserving the free status of all derivatives of our free software and
  384: of promoting the sharing and reuse of software generally.
  386: @iftex
  387: @heading NO WARRANTY
  388: @end iftex
  389: @ifinfo
  390: @center NO WARRANTY
  391: @end ifinfo
  393: @item
  404: @item
  414: @end enumerate
  416: @iftex
  418: @end iftex
  419: @ifinfo
  421: @end ifinfo
  423: @page
  424: @unnumberedsec How to Apply These Terms to Your New Programs
  426:   If you develop a new program, and you want it to be of the greatest
  427: possible use to the public, the best way to achieve this is to make it
  428: free software which everyone can redistribute and change under these terms.
  430:   To do so, attach the following notices to the program.  It is safest
  431: to attach them to the start of each source file to most effectively
  432: convey the exclusion of warranty; and each file should have at least
  433: the ``copyright'' line and a pointer to where the full notice is found.
  435: @smallexample
  436: @var{one line to give the program's name and a brief idea of what it does.}
  437: Copyright (C) 19@var{yy}  @var{name of author}
  439: This program is free software; you can redistribute it and/or modify 
  440: it under the terms of the GNU General Public License as published by 
  441: the Free Software Foundation; either version 2 of the License, or 
  442: (at your option) any later version.
  444: This program is distributed in the hope that it will be useful,
  445: but WITHOUT ANY WARRANTY; without even the implied warranty of
  447: GNU General Public License for more details.
  449: You should have received a copy of the GNU General Public License
  450: along with this program; if not, write to the Free Software
  451: Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  452: @end smallexample
  454: Also add information on how to contact you by electronic and paper mail.
  456: If the program is interactive, make it output a short notice like this
  457: when it starts in an interactive mode:
  459: @smallexample
  460: Gnomovision version 69, Copyright (C) 19@var{yy} @var{name of author}
  461: Gnomovision comes with ABSOLUTELY NO WARRANTY; for details
  462: type `show w'.  
  463: This is free software, and you are welcome to redistribute it 
  464: under certain conditions; type `show c' for details.
  465: @end smallexample
  467: The hypothetical commands @samp{show w} and @samp{show c} should show
  468: the appropriate parts of the General Public License.  Of course, the
  469: commands you use may be called something other than @samp{show w} and
  470: @samp{show c}; they could even be mouse-clicks or menu items---whatever
  471: suits your program.
  473: You should also get your employer (if you work as a programmer) or your
  474: school, if any, to sign a ``copyright disclaimer'' for the program, if
  475: necessary.  Here is a sample; alter the names:
  477: @smallexample
  478: Yoyodyne, Inc., hereby disclaims all copyright interest in the program
  479: `Gnomovision' (which makes passes at compilers) written by James Hacker.
  481: @var{signature of Ty Coon}, 1 April 1989
  482: Ty Coon, President of Vice
  483: @end smallexample
  485: This General Public License does not permit incorporating your program into
  486: proprietary programs.  If your program is a subroutine library, you may
  487: consider it more useful to permit linking proprietary applications with the
  488: library.  If this is what you want to do, use the GNU Library General
  489: Public License instead of this License.
  491: @iftex
  492: @node    Preface
  493: @comment node-name,     next,           previous, up
  494: @unnumbered Preface
  495: @cindex Preface
  496: This manual documents Gforth. The reader is expected to know
  497: Forth. This manual is primarily a reference manual. @xref{Other Books}
  498: for introductory material.
  499: @end iftex
  501: @node    Goals, Other Books, License, Top
  502: @comment node-name,     next,           previous, up
  503: @chapter Goals of Gforth
  504: @cindex Goals
  505: The goal of the Gforth Project is to develop a standard model for
  506: ANSI Forth. This can be split into several subgoals:
  508: @itemize @bullet
  509: @item
  510: Gforth should conform to the ANSI Forth standard.
  511: @item
  512: It should be a model, i.e. it should define all the
  513: implementation-dependent things.
  514: @item
  515: It should become standard, i.e. widely accepted and used. This goal
  516: is the most difficult one.
  517: @end itemize
  519: To achieve these goals Gforth should be
  520: @itemize @bullet
  521: @item
  522: Similar to previous models (fig-Forth, F83)
  523: @item
  524: Powerful. It should provide for all the things that are considered
  525: necessary today and even some that are not yet considered necessary.
  526: @item
  527: Efficient. It should not get the reputation of being exceptionally
  528: slow.
  529: @item
  530: Free.
  531: @item
  532: Available on many machines/easy to port.
  533: @end itemize
  535: Have we achieved these goals? Gforth conforms to the ANS Forth
  536: standard. It may be considered a model, but we have not yet documented
  537: which parts of the model are stable and which parts we are likely to
  538: change. It certainly has not yet become a de facto standard. It has some
  539: similarities and some differences to previous models. It has some
  540: powerful features, but not yet everything that we envisioned. We
  541: certainly have achieved our execution speed goals (@pxref{Performance}).
  542: It is free and available on many machines.
  544: @node Other Books, Invocation, Goals, Top
  545: @chapter Other books on ANS Forth
  547: As the standard is relatively new, there are not many books out yet. It
  548: is not recommended to learn Forth by using Gforth and a book that is
  549: not written for ANS Forth, as you will not know your mistakes from the
  550: deviations of the book.
  552: There is, of course, the standard, the definite reference if you want to
  553: write ANS Forth programs. It is available in printed form from the
  554: National Standards Institute Sales Department (Tel.: USA (212) 642-4900;
  555: Fax.: USA (212) 302-1286) as document @cite{X3.215-1994} for about $200. You
  556: can also get it from Global Engineering Documents (Tel.: USA (800)
  557: 854-7179; Fax.: (303) 843-9880) for about $300.
  559: @cite{dpANS6}, the last draft of the standard, which was then submitted to ANSI
  560: for publication is available electronically and for free in some MS Word
  561: format, and it has been converted to HTML. Some pointers to these
  562: versions can be found through
  563: @*@file{}.
  565: @cite{Forth: The new model} by Jack Woehr (Prentice-Hall, 1993) is an
  566: introductory book based on a draft version of the standard. It does not
  567: cover the whole standard. It also contains interesting background
  568: information (Jack Woehr was in the ANS Forth Technical Committe). It is
  569: not appropriate for complete newbies, but programmers experienced in
  570: other languages should find it ok.
  572: @node Invocation, Words, Other Books, Top
  573: @chapter Invocation
  575: You will usually just say @code{gforth}. In many other cases the default
  576: Gforth image will be invoked like this:
  578: @example
  579: gforth [files] [-e forth-code]
  580: @end example
  582: executing the contents of the files and the Forth code in the order they
  583: are given.
  585: In general, the command line looks like this:
  587: @example
  588: gforth [initialization options] [image-specific options]
  589: @end example
  591: The initialization options must come before the rest of the command
  592: line. They are:
  594: @table @code
  595: @item --image-file @var{file}
  596: @item -i @var{file}
  597: Loads the Forth image @var{file} instead of the default
  598: @file{}.
  600: @item --path @var{path}
  601: @item -p @var{path}
  602: Uses @var{path} for searching the image file and Forth source code
  603: files instead of the default in the environment variable
  604: @code{GFORTHPATH} or the path specified at installation time (typically
  605: @file{/usr/local/lib/gforth:.}). A path is given as a @code{:}-separated
  606: list.
  608: @item --dictionary-size @var{size}
  609: @item -m @var{size}
  610: Allocate @var{size} space for the Forth dictionary space instead of
  611: using the default specified in the image (typically 256K). The
  612: @var{size} specification consists of an integer and a unit (e.g.,
  613: @code{4M}). The unit can be one of @code{b} (bytes), @code{e} (element
  614: size, in this case Cells), @code{k} (kilobytes), and @code{M}
  615: (Megabytes). If no unit is specified, @code{e} is used.
  617: @item --data-stack-size @var{size}
  618: @item -d @var{size}
  619: Allocate @var{size} space for the data stack instead of using the
  620: default specified in the image (typically 16K).
  622: @item --return-stack-size @var{size}
  623: @item -r @var{size}
  624: Allocate @var{size} space for the return stack instead of using the
  625: default specified in the image (typically 16K).
  627: @item --fp-stack-size @var{size}
  628: @item -f @var{size}
  629: Allocate @var{size} space for the floating point stack instead of
  630: using the default specified in the image (typically 16K). In this case
  631: the unit specifier @code{e} refers to floating point numbers.
  633: @item --locals-stack-size @var{size}
  634: @item -l @var{size}
  635: Allocate @var{size} space for the locals stack instead of using the
  636: default specified in the image (typically 16K).
  638: @end table
  640: As explained above, the image-specific command-line arguments for the
  641: default image @file{} consist of a sequence of filenames and
  642: @code{-e @var{forth-code}} options that are interpreted in the seqence
  643: in which they are given. The @code{-e @var{forth-code}} or
  644: @code{--evaluate @var{forth-code}} option evaluates the forth
  645: code. This option takes only one argument; if you want to evaluate more
  646: Forth words, you have to quote them or use several @code{-e}s. To exit
  647: after processing the command line (instead of entering interactive mode)
  648: append @code{-e bye} to the command line.
  650: If you have several versions of Gforth installed, @code{gforth} will
  651: invoke the version that was installed last. @code{gforth-@var{version}}
  652: invokes a specific version. You may want to use the option
  653: @code{--path}, if your environment contains the variable
  654: @code{GFORTHPATH}.
  656: Not yet implemented:
  657: On startup the system first executes the system initialization file
  658: (unless the option @code{--no-init-file} is given; note that the system
  659: resulting from using this option may not be ANS Forth conformant). Then
  660: the user initialization file @file{.gforth.fs} is executed, unless the
  661: option @code{--no-rc} is given; this file is first searched in @file{.},
  662: then in @file{~}, then in the normal path (see above).
  664: @node Words, ANS conformance, Invocation, Top
  665: @chapter Forth Words
  667: @menu
  668: * Notation::                    
  669: * Arithmetic::                  
  670: * Stack Manipulation::          
  671: * Memory access::               
  672: * Control Structures::          
  673: * Locals::                      
  674: * Defining Words::              
  675: * Wordlists::                   
  676: * Files::                       
  677: * Blocks::                      
  678: * Other I/O::                   
  679: * Programming Tools::           
  680: * Assembler and Code words::    
  681: * Threading Words::             
  682: @end menu
  684: @node Notation, Arithmetic, Words, Words
  685: @section Notation
  687: The Forth words are described in this section in the glossary notation
  688: that has become a de-facto standard for Forth texts, i.e.
  690: @format
  691: @var{word}     @var{Stack effect}   @var{wordset}   @var{pronunciation}
  692: @end format
  693: @var{Description}
  695: @table @var
  696: @item word
  697: The name of the word. BTW, Gforth is case insensitive, so you can
  698: type the words in in lower case (However, @pxref{core-idef}).
  700: @item Stack effect
  701: The stack effect is written in the notation @code{@var{before} --
  702: @var{after}}, where @var{before} and @var{after} describe the top of
  703: stack entries before and after the execution of the word. The rest of
  704: the stack is not touched by the word. The top of stack is rightmost,
  705: i.e., a stack sequence is written as it is typed in. Note that Gforth
  706: uses a separate floating point stack, but a unified stack
  707: notation. Also, return stack effects are not shown in @var{stack
  708: effect}, but in @var{Description}. The name of a stack item describes
  709: the type and/or the function of the item. See below for a discussion of
  710: the types.
  712: All words have two stack effects: A compile-time stack effect and a
  713: run-time stack effect. The compile-time stack-effect of most words is
  714: @var{ -- }. If the compile-time stack-effect of a word deviates from
  715: this standard behaviour, or the word does other unusual things at
  716: compile time, both stack effects are shown; otherwise only the run-time
  717: stack effect is shown.
  719: @item pronunciation
  720: How the word is pronounced
  722: @item wordset
  723: The ANS Forth standard is divided into several wordsets. A standard
  724: system need not support all of them. So, the fewer wordsets your program
  725: uses the more portable it will be in theory. However, we suspect that
  726: most ANS Forth systems on personal machines will feature all
  727: wordsets. Words that are not defined in the ANS standard have
  728: @code{gforth} or @code{gforth-internal} as wordset. @code{gforth}
  729: describes words that will work in future releases of Gforth;
  730: @code{gforth-internal} words are more volatile. Environmental query
  731: strings are also displayed like words; you can recognize them by the
  732: @code{environment} in the wordset field.
  734: @item Description
  735: A description of the behaviour of the word.
  736: @end table
  738: The type of a stack item is specified by the character(s) the name
  739: starts with:
  741: @table @code
  742: @item f
  743: Bool, i.e. @code{false} or @code{true}.
  744: @item c
  745: Char
  746: @item w
  747: Cell, can contain an integer or an address
  748: @item n
  749: signed integer
  750: @item u
  751: unsigned integer
  752: @item d
  753: double sized signed integer
  754: @item ud
  755: double sized unsigned integer
  756: @item r
  757: Float
  758: @item a_
  759: Cell-aligned address
  760: @item c_
  761: Char-aligned address (note that a Char is two bytes in Windows NT)
  762: @item f_
  763: Float-aligned address
  764: @item df_
  765: Address aligned for IEEE double precision float
  766: @item sf_
  767: Address aligned for IEEE single precision float
  768: @item xt
  769: Execution token, same size as Cell
  770: @item wid
  771: Wordlist ID, same size as Cell
  772: @item f83name
  773: Pointer to a name structure
  774: @end table
  776: @node Arithmetic, Stack Manipulation, Notation, Words
  777: @section Arithmetic
  778: Forth arithmetic is not checked, i.e., you will not hear about integer
  779: overflow on addition or multiplication, you may hear about division by
  780: zero if you are lucky. The operator is written after the operands, but
  781: the operands are still in the original order. I.e., the infix @code{2-1}
  782: corresponds to @code{2 1 -}. Forth offers a variety of division
  783: operators. If you perform division with potentially negative operands,
  784: you do not want to use @code{/} or @code{/mod} with its undefined
  785: behaviour, but rather @code{fm/mod} or @code{sm/mod} (probably the
  786: former, @pxref{Mixed precision}).
  788: @menu
  789: * Single precision::            
  790: * Bitwise operations::          
  791: * Mixed precision::             operations with single and double-cell integers
  792: * Double precision::            Double-cell integer arithmetic
  793: * Floating Point::              
  794: @end menu
  796: @node Single precision, Bitwise operations, Arithmetic, Arithmetic
  797: @subsection Single precision
  798: doc-+
  799: doc--
  800: doc-*
  801: doc-/
  802: doc-mod
  803: doc-/mod
  804: doc-negate
  805: doc-abs
  806: doc-min
  807: doc-max
  809: @node Bitwise operations, Mixed precision, Single precision, Arithmetic
  810: @subsection Bitwise operations
  811: doc-and
  812: doc-or
  813: doc-xor
  814: doc-invert
  815: doc-2*
  816: doc-2/
  818: @node Mixed precision, Double precision, Bitwise operations, Arithmetic
  819: @subsection Mixed precision
  820: doc-m+
  821: doc-*/
  822: doc-*/mod
  823: doc-m*
  824: doc-um*
  825: doc-m*/
  826: doc-um/mod
  827: doc-fm/mod
  828: doc-sm/rem
  830: @node Double precision, Floating Point, Mixed precision, Arithmetic
  831: @subsection Double precision
  833: The outer (aka text) interpreter converts numbers containing a dot into
  834: a double precision number. Note that only numbers with the dot as last
  835: character are standard-conforming.
  837: doc-d+
  838: doc-d-
  839: doc-dnegate
  840: doc-dabs
  841: doc-dmin
  842: doc-dmax
  844: @node Floating Point,  , Double precision, Arithmetic
  845: @subsection Floating Point
  847: The format of floating point numbers recognized by the outer (aka text)
  848: interpreter is: a signed decimal number, possibly containing a decimal
  849: point (@code{.}), followed by @code{E} or @code{e}, optionally followed
  850: by a signed integer (the exponent). E.g., @code{1e} ist the same as
  851: @code{+1.0e+1}. Note that a number without @code{e}
  852: is not interpreted as floating-point number, but as double (if the
  853: number contains a @code{.}) or single precision integer. Also,
  854: conversions between string and floating point numbers always use base
  855: 10, irrespective of the value of @code{BASE}. If @code{BASE} contains a
  856: value greater then 14, the @code{E} may be interpreted as digit and the
  857: number will be interpreted as integer, unless it has a signed exponent
  858: (both @code{+} and @code{-} are allowed as signs).
  860: Angles in floating point operations are given in radians (a full circle
  861: has 2 pi radians). Note, that Gforth has a separate floating point
  862: stack, but we use the unified notation.
  864: Floating point numbers have a number of unpleasant surprises for the
  865: unwary (e.g., floating point addition is not associative) and even a few
  866: for the wary. You should not use them unless you know what you are doing
  867: or you don't care that the results you get are totally bogus. If you
  868: want to learn about the problems of floating point numbers (and how to
  869: avoid them), you might start with @cite{David Goldberg, What Every
  870: Computer Scientist Should Know About Floating-Point Arithmetic, ACM
  871: Computing Surveys 23(1):5@minus{}48, March 1991}.
  873: doc-f+
  874: doc-f-
  875: doc-f*
  876: doc-f/
  877: doc-fnegate
  878: doc-fabs
  879: doc-fmax
  880: doc-fmin
  881: doc-floor
  882: doc-fround
  883: doc-f**
  884: doc-fsqrt
  885: doc-fexp
  886: doc-fexpm1
  887: doc-fln
  888: doc-flnp1
  889: doc-flog
  890: doc-falog
  891: doc-fsin
  892: doc-fcos
  893: doc-fsincos
  894: doc-ftan
  895: doc-fasin
  896: doc-facos
  897: doc-fatan
  898: doc-fatan2
  899: doc-fsinh
  900: doc-fcosh
  901: doc-ftanh
  902: doc-fasinh
  903: doc-facosh
  904: doc-fatanh
  906: @node Stack Manipulation, Memory access, Arithmetic, Words
  907: @section Stack Manipulation
  909: Gforth has a data stack (aka parameter stack) for characters, cells,
  910: addresses, and double cells, a floating point stack for floating point
  911: numbers, a return stack for storing the return addresses of colon
  912: definitions and other data, and a locals stack for storing local
  913: variables. Note that while every sane Forth has a separate floating
  914: point stack, this is not strictly required; an ANS Forth system could
  915: theoretically keep floating point numbers on the data stack. As an
  916: additional difficulty, you don't know how many cells a floating point
  917: number takes. It is reportedly possible to write words in a way that
  918: they work also for a unified stack model, but we do not recommend trying
  919: it. Instead, just say that your program has an environmental dependency
  920: on a separate FP stack.
  922: Also, a Forth system is allowed to keep the local variables on the
  923: return stack. This is reasonable, as local variables usually eliminate
  924: the need to use the return stack explicitly. So, if you want to produce
  925: a standard complying program and if you are using local variables in a
  926: word, forget about return stack manipulations in that word (see the
  927: standard document for the exact rules).
  929: @menu
  930: * Data stack::                  
  931: * Floating point stack::        
  932: * Return stack::                
  933: * Locals stack::                
  934: * Stack pointer manipulation::  
  935: @end menu
  937: @node Data stack, Floating point stack, Stack Manipulation, Stack Manipulation
  938: @subsection Data stack
  939: doc-drop
  940: doc-nip
  941: doc-dup
  942: doc-over
  943: doc-tuck
  944: doc-swap
  945: doc-rot
  946: doc--rot
  947: doc-?dup
  948: doc-pick
  949: doc-roll
  950: doc-2drop
  951: doc-2nip
  952: doc-2dup
  953: doc-2over
  954: doc-2tuck
  955: doc-2swap
  956: doc-2rot
  958: @node Floating point stack, Return stack, Data stack, Stack Manipulation
  959: @subsection Floating point stack
  960: doc-fdrop
  961: doc-fnip
  962: doc-fdup
  963: doc-fover
  964: doc-ftuck
  965: doc-fswap
  966: doc-frot
  968: @node Return stack, Locals stack, Floating point stack, Stack Manipulation
  969: @subsection Return stack
  970: doc->r
  971: doc-r>
  972: doc-r@
  973: doc-rdrop
  974: doc-2>r
  975: doc-2r>
  976: doc-2r@
  977: doc-2rdrop
  979: @node Locals stack, Stack pointer manipulation, Return stack, Stack Manipulation
  980: @subsection Locals stack
  982: @node Stack pointer manipulation,  , Locals stack, Stack Manipulation
  983: @subsection Stack pointer manipulation
  984: doc-sp@
  985: doc-sp!
  986: doc-fp@
  987: doc-fp!
  988: doc-rp@
  989: doc-rp!
  990: doc-lp@
  991: doc-lp!
  993: @node Memory access, Control Structures, Stack Manipulation, Words
  994: @section Memory access
  996: @menu
  997: * Stack-Memory transfers::      
  998: * Address arithmetic::          
  999: * Memory block access::         
 1000: @end menu
 1002: @node Stack-Memory transfers, Address arithmetic, Memory access, Memory access
 1003: @subsection Stack-Memory transfers
 1005: doc-@
 1006: doc-!
 1007: doc-+!
 1008: doc-c@
 1009: doc-c!
 1010: doc-2@
 1011: doc-2!
 1012: doc-f@
 1013: doc-f!
 1014: doc-sf@
 1015: doc-sf!
 1016: doc-df@
 1017: doc-df!
 1019: @node Address arithmetic, Memory block access, Stack-Memory transfers, Memory access
 1020: @subsection Address arithmetic
 1022: ANS Forth does not specify the sizes of the data types. Instead, it
 1023: offers a number of words for computing sizes and doing address
 1024: arithmetic. Basically, address arithmetic is performed in terms of
 1025: address units (aus); on most systems the address unit is one byte. Note
 1026: that a character may have more than one au, so @code{chars} is no noop
 1027: (on systems where it is a noop, it compiles to nothing).
 1029: ANS Forth also defines words for aligning addresses for specific
 1030: addresses. Many computers require that accesses to specific data types
 1031: must only occur at specific addresses; e.g., that cells may only be
 1032: accessed at addresses divisible by 4. Even if a machine allows unaligned
 1033: accesses, it can usually perform aligned accesses faster. 
 1035: For the performance-conscious: alignment operations are usually only
 1036: necessary during the definition of a data structure, not during the
 1037: (more frequent) accesses to it.
 1039: ANS Forth defines no words for character-aligning addresses. This is not
 1040: an oversight, but reflects the fact that addresses that are not
 1041: char-aligned have no use in the standard and therefore will not be
 1042: created.
 1044: The standard guarantees that addresses returned by @code{CREATE}d words
 1045: are cell-aligned; in addition, Gforth guarantees that these addresses
 1046: are aligned for all purposes.
 1048: Note that the standard defines a word @code{char}, which has nothing to
 1049: do with address arithmetic.
 1051: doc-chars
 1052: doc-char+
 1053: doc-cells
 1054: doc-cell+
 1055: doc-align
 1056: doc-aligned
 1057: doc-floats
 1058: doc-float+
 1059: doc-falign
 1060: doc-faligned
 1061: doc-sfloats
 1062: doc-sfloat+
 1063: doc-sfalign
 1064: doc-sfaligned
 1065: doc-dfloats
 1066: doc-dfloat+
 1067: doc-dfalign
 1068: doc-dfaligned
 1069: doc-maxalign
 1070: doc-maxaligned
 1071: doc-cfalign
 1072: doc-cfaligned
 1073: doc-address-unit-bits
 1075: @node Memory block access,  , Address arithmetic, Memory access
 1076: @subsection Memory block access
 1078: doc-move
 1079: doc-erase
 1081: While the previous words work on address units, the rest works on
 1082: characters.
 1084: doc-cmove
 1085: doc-cmove>
 1086: doc-fill
 1087: doc-blank
 1089: @node Control Structures, Locals, Memory access, Words
 1090: @section Control Structures
 1092: Control structures in Forth cannot be used in interpret state, only in
 1093: compile state, i.e., in a colon definition. We do not like this
 1094: limitation, but have not seen a satisfying way around it yet, although
 1095: many schemes have been proposed.
 1097: @menu
 1098: * Selection::                   
 1099: * Simple Loops::                
 1100: * Counted Loops::               
 1101: * Arbitrary control structures::  
 1102: * Calls and returns::           
 1103: * Exception Handling::          
 1104: @end menu
 1106: @node Selection, Simple Loops, Control Structures, Control Structures
 1107: @subsection Selection
 1109: @example
 1110: @var{flag}
 1111: IF
 1112:   @var{code}
 1113: ENDIF
 1114: @end example
 1115: or
 1116: @example
 1117: @var{flag}
 1118: IF
 1119:   @var{code1}
 1120: ELSE
 1121:   @var{code2}
 1122: ENDIF
 1123: @end example
 1125: You can use @code{THEN} instead of @code{ENDIF}. Indeed, @code{THEN} is
 1126: standard, and @code{ENDIF} is not, although it is quite popular. We
 1127: recommend using @code{ENDIF}, because it is less confusing for people
 1128: who also know other languages (and is not prone to reinforcing negative
 1129: prejudices against Forth in these people). Adding @code{ENDIF} to a
 1130: system that only supplies @code{THEN} is simple:
 1131: @example
 1132: : endif   POSTPONE then ; immediate
 1133: @end example
 1135: [According to @cite{Webster's New Encyclopedic Dictionary}, @dfn{then
 1136: (adv.)}  has the following meanings:
 1137: @quotation
 1138: ... 2b: following next after in order ... 3d: as a necessary consequence
 1139: (if you were there, then you saw them).
 1140: @end quotation
 1141: Forth's @code{THEN} has the meaning 2b, whereas @code{THEN} in Pascal
 1142: and many other programming languages has the meaning 3d.]
 1144: We also provide the words @code{?dup-if} and @code{?dup-0=-if}, so you
 1145: can avoid using @code{?dup}.
 1147: @example
 1148: @var{n}
 1149: CASE
 1150:   @var{n1} OF @var{code1} ENDOF
 1151:   @var{n2} OF @var{code2} ENDOF
 1152:   @dots{}
 1153: ENDCASE
 1154: @end example
 1156: Executes the first @var{codei}, where the @var{ni} is equal to
 1157: @var{n}. A default case can be added by simply writing the code after
 1158: the last @code{ENDOF}. It may use @var{n}, which is on top of the stack,
 1159: but must not consume it.
 1161: @node Simple Loops, Counted Loops, Selection, Control Structures
 1162: @subsection Simple Loops
 1164: @example
 1165: BEGIN
 1166:   @var{code1}
 1167:   @var{flag}
 1168: WHILE
 1169:   @var{code2}
 1170: REPEAT
 1171: @end example
 1173: @var{code1} is executed and @var{flag} is computed. If it is true,
 1174: @var{code2} is executed and the loop is restarted; If @var{flag} is false, execution continues after the @code{REPEAT}.
 1176: @example
 1177: BEGIN
 1178:   @var{code}
 1179:   @var{flag}
 1180: UNTIL
 1181: @end example
 1183: @var{code} is executed. The loop is restarted if @code{flag} is false.
 1185: @example
 1186: BEGIN
 1187:   @var{code}
 1188: AGAIN
 1189: @end example
 1191: This is an endless loop.
 1193: @node Counted Loops, Arbitrary control structures, Simple Loops, Control Structures
 1194: @subsection Counted Loops
 1196: The basic counted loop is:
 1197: @example
 1198: @var{limit} @var{start}
 1199: ?DO
 1200:   @var{body}
 1201: LOOP
 1202: @end example
 1204: This performs one iteration for every integer, starting from @var{start}
 1205: and up to, but excluding @var{limit}. The counter, aka index, can be
 1206: accessed with @code{i}. E.g., the loop
 1207: @example
 1208: 10 0 ?DO
 1209:   i .
 1210: LOOP
 1211: @end example
 1212: prints
 1213: @example
 1214: 0 1 2 3 4 5 6 7 8 9
 1215: @end example
 1216: The index of the innermost loop can be accessed with @code{i}, the index
 1217: of the next loop with @code{j}, and the index of the third loop with
 1218: @code{k}.
 1220: The loop control data are kept on the return stack, so there are some
 1221: restrictions on mixing return stack accesses and counted loop
 1222: words. E.g., if you put values on the return stack outside the loop, you
 1223: cannot read them inside the loop. If you put values on the return stack
 1224: within a loop, you have to remove them before the end of the loop and
 1225: before accessing the index of the loop.
 1227: There are several variations on the counted loop:
 1229: @code{LEAVE} leaves the innermost counted loop immediately.
 1231: If @var{start} is greater than @var{limit}, a @code{?DO} loop is entered
 1232: (and @code{LOOP} iterates until they become equal by wrap-around
 1233: arithmetic). This behaviour is usually not what you want. Therefore,
 1234: Gforth offers @code{+DO} and @code{U+DO} (as replacements for
 1235: @code{?DO}), which do not enter the loop if @var{start} is greater than
 1236: @var{limit}; @code{+DO} is for signed loop parameters, @code{U+DO} for
 1237: unsigned loop parameters. These words can be implemented easily on
 1238: standard systems, so using them does not make your programs hard to
 1239: port; e.g.:
 1240: @example
 1241: : +DO ( compile-time: -- do-sys; run-time: n1 n2 -- )
 1242:     POSTPONE over POSTPONE min POSTPONE ?DO ; immediate
 1243: @end example
 1245: @code{LOOP} can be replaced with @code{@var{n} +LOOP}; this updates the
 1246: index by @var{n} instead of by 1. The loop is terminated when the border
 1247: between @var{limit-1} and @var{limit} is crossed. E.g.:
 1249: @code{4 0 +DO  i .  2 +LOOP}   prints @code{0 2}
 1251: @code{4 1 +DO  i .  2 +LOOP}   prints @code{1 3}
 1253: The behaviour of @code{@var{n} +LOOP} is peculiar when @var{n} is negative:
 1255: @code{-1 0 ?DO  i .  -1 +LOOP}  prints @code{0 -1}
 1257: @code{ 0 0 ?DO  i .  -1 +LOOP}  prints nothing
 1259: Therefore we recommend avoiding @code{@var{n} +LOOP} with negative
 1260: @var{n}. One alternative is @code{@var{u} -LOOP}, which reduces the
 1261: index by @var{u} each iteration. The loop is terminated when the border
 1262: between @var{limit+1} and @var{limit} is crossed. Gforth also provides
 1263: @code{-DO} and @code{U-DO} for down-counting loops. E.g.:
 1265: @code{-2 0 -DO  i .  1 -LOOP}  prints @code{0 -1}
 1267: @code{-1 0 -DO  i .  1 -LOOP}  prints @code{0}
 1269: @code{ 0 0 -DO  i .  1 -LOOP}  prints nothing
 1271: Another alternative is @code{@var{n} S+LOOP}, where the negative
 1272: case behaves symmetrical to the positive case:
 1274: @code{-2 0 -DO  i .  -1 S+LOOP}  prints @code{0 -1}
 1276: The loop is terminated when the border between @var{limit@minus{}sgn(n)}
 1277: and @var{limit} is crossed. Unfortunately, neither @code{-LOOP} nor
 1278: @code{S+LOOP} are part of the ANS Forth standard, and they are not easy
 1279: to implement using standard words. If you want to write standard
 1280: programs, just avoid counting down.
 1282: @code{?DO} can also be replaced by @code{DO}. @code{DO} always enters
 1283: the loop, independent of the loop parameters. Do not use @code{DO}, even
 1284: if you know that the loop is entered in any case. Such knowledge tends
 1285: to become invalid during maintenance of a program, and then the
 1286: @code{DO} will make trouble.
 1288: @code{UNLOOP} is used to prepare for an abnormal loop exit, e.g., via
 1289: @code{EXIT}. @code{UNLOOP} removes the loop control parameters from the
 1290: return stack so @code{EXIT} can get to its return address.
 1292: Another counted loop is
 1293: @example
 1294: @var{n}
 1295: FOR
 1296:   @var{body}
 1297: NEXT
 1298: @end example
 1299: This is the preferred loop of native code compiler writers who are too
 1300: lazy to optimize @code{?DO} loops properly. In Gforth, this loop
 1301: iterates @var{n+1} times; @code{i} produces values starting with @var{n}
 1302: and ending with 0. Other Forth systems may behave differently, even if
 1303: they support @code{FOR} loops.
 1305: @node Arbitrary control structures, Calls and returns, Counted Loops, Control Structures
 1306: @subsection Arbitrary control structures
 1308: ANS Forth permits and supports using control structures in a non-nested
 1309: way. Information about incomplete control structures is stored on the
 1310: control-flow stack. This stack may be implemented on the Forth data
 1311: stack, and this is what we have done in Gforth.
 1313: An @i{orig} entry represents an unresolved forward branch, a @i{dest}
 1314: entry represents a backward branch target. A few words are the basis for
 1315: building any control structure possible (except control structures that
 1316: need storage, like calls, coroutines, and backtracking).
 1318: doc-if
 1319: doc-ahead
 1320: doc-then
 1321: doc-begin
 1322: doc-until
 1323: doc-again
 1324: doc-cs-pick
 1325: doc-cs-roll
 1327: On many systems control-flow stack items take one word, in Gforth they
 1328: currently take three (this may change in the future). Therefore it is a
 1329: really good idea to manipulate the control flow stack with
 1330: @code{cs-pick} and @code{cs-roll}, not with data stack manipulation
 1331: words.
 1333: Some standard control structure words are built from these words:
 1335: doc-else
 1336: doc-while
 1337: doc-repeat
 1339: Counted loop words constitute a separate group of words:
 1341: doc-?do
 1342: doc-+do
 1343: doc-u+do
 1344: doc--do
 1345: doc-u-do
 1346: doc-do
 1347: doc-for
 1348: doc-loop
 1349: doc-s+loop
 1350: doc-+loop
 1351: doc--loop
 1352: doc-next
 1353: doc-leave
 1354: doc-?leave
 1355: doc-unloop
 1356: doc-done
 1358: The standard does not allow using @code{cs-pick} and @code{cs-roll} on
 1359: @i{do-sys}. Our system allows it, but it's your job to ensure that for
 1360: every @code{?DO} etc. there is exactly one @code{UNLOOP} on any path
 1361: through the definition (@code{LOOP} etc. compile an @code{UNLOOP} on the
 1362: fall-through path). Also, you have to ensure that all @code{LEAVE}s are
 1363: resolved (by using one of the loop-ending words or @code{DONE}).
 1365: Another group of control structure words are
 1367: doc-case
 1368: doc-endcase
 1369: doc-of
 1370: doc-endof
 1372: @i{case-sys} and @i{of-sys} cannot be processed using @code{cs-pick} and
 1373: @code{cs-roll}.
 1375: @subsubsection Programming Style
 1377: In order to ensure readability we recommend that you do not create
 1378: arbitrary control structures directly, but define new control structure
 1379: words for the control structure you want and use these words in your
 1380: program.
 1382: E.g., instead of writing
 1384: @example
 1385: begin
 1386:   ...
 1387: if [ 1 cs-roll ]
 1388:   ...
 1389: again then
 1390: @end example
 1392: we recommend defining control structure words, e.g.,
 1394: @example
 1395: : while ( dest -- orig dest )
 1396:  POSTPONE if
 1397:  1 cs-roll ; immediate
 1399: : repeat ( orig dest -- )
 1400:  POSTPONE again
 1401:  POSTPONE then ; immediate
 1402: @end example
 1404: and then using these to create the control structure:
 1406: @example
 1407: begin
 1408:   ...
 1409: while
 1410:   ...
 1411: repeat
 1412: @end example
 1414: That's much easier to read, isn't it? Of course, @code{BEGIN} and
 1415: @code{WHILE} are predefined, so in this example it would not be
 1416: necessary to define them.
 1418: @node Calls and returns, Exception Handling, Arbitrary control structures, Control Structures
 1419: @subsection Calls and returns
 1421: A definition can be called simply be writing the name of the
 1422: definition. When the end of the definition is reached, it returns. An
 1423: earlier return can be forced using
 1425: doc-exit
 1427: Don't forget to clean up the return stack and @code{UNLOOP} any
 1428: outstanding @code{?DO}...@code{LOOP}s before @code{EXIT}ing. The
 1429: primitive compiled by @code{EXIT} is
 1431: doc-;s
 1433: @node Exception Handling,  , Calls and returns, Control Structures
 1434: @subsection Exception Handling
 1436: doc-catch
 1437: doc-throw
 1439: @node Locals, Defining Words, Control Structures, Words
 1440: @section Locals
 1442: Local variables can make Forth programming more enjoyable and Forth
 1443: programs easier to read. Unfortunately, the locals of ANS Forth are
 1444: laden with restrictions. Therefore, we provide not only the ANS Forth
 1445: locals wordset, but also our own, more powerful locals wordset (we
 1446: implemented the ANS Forth locals wordset through our locals wordset).
 1448: The ideas in this section have also been published in the paper
 1449: @cite{Automatic Scoping of Local Variables} by M. Anton Ertl, presented
 1450: at EuroForth '94; it is available at
 1451: @*@file{}.
 1453: @menu
 1454: * Gforth locals::               
 1455: * ANS Forth locals::            
 1456: @end menu
 1458: @node Gforth locals, ANS Forth locals, Locals, Locals
 1459: @subsection Gforth locals
 1461: Locals can be defined with
 1463: @example
 1464: @{ local1 local2 ... -- comment @}
 1465: @end example
 1466: or
 1467: @example
 1468: @{ local1 local2 ... @}
 1469: @end example
 1471: E.g.,
 1472: @example
 1473: : max @{ n1 n2 -- n3 @}
 1474:  n1 n2 > if
 1475:    n1
 1476:  else
 1477:    n2
 1478:  endif ;
 1479: @end example
 1481: The similarity of locals definitions with stack comments is intended. A
 1482: locals definition often replaces the stack comment of a word. The order
 1483: of the locals corresponds to the order in a stack comment and everything
 1484: after the @code{--} is really a comment.
 1486: This similarity has one disadvantage: It is too easy to confuse locals
 1487: declarations with stack comments, causing bugs and making them hard to
 1488: find. However, this problem can be avoided by appropriate coding
 1489: conventions: Do not use both notations in the same program. If you do,
 1490: they should be distinguished using additional means, e.g. by position.
 1492: The name of the local may be preceded by a type specifier, e.g.,
 1493: @code{F:} for a floating point value:
 1495: @example
 1496: : CX* @{ F: Ar F: Ai F: Br F: Bi -- Cr Ci @}
 1497: \ complex multiplication
 1498:  Ar Br f* Ai Bi f* f-
 1499:  Ar Bi f* Ai Br f* f+ ;
 1500: @end example
 1502: Gforth currently supports cells (@code{W:}, @code{W^}), doubles
 1503: (@code{D:}, @code{D^}), floats (@code{F:}, @code{F^}) and characters
 1504: (@code{C:}, @code{C^}) in two flavours: a value-flavoured local (defined
 1505: with @code{W:}, @code{D:} etc.) produces its value and can be changed
 1506: with @code{TO}. A variable-flavoured local (defined with @code{W^} etc.)
 1507: produces its address (which becomes invalid when the variable's scope is
 1508: left). E.g., the standard word @code{emit} can be defined in therms of
 1509: @code{type} like this:
 1511: @example
 1512: : emit @{ C^ char* -- @}
 1513:     char* 1 type ;
 1514: @end example
 1516: A local without type specifier is a @code{W:} local. Both flavours of
 1517: locals are initialized with values from the data or FP stack.
 1519: Currently there is no way to define locals with user-defined data
 1520: structures, but we are working on it.
 1522: Gforth allows defining locals everywhere in a colon definition. This
 1523: poses the following questions:
 1525: @menu
 1526: * Where are locals visible by name?::  
 1527: * How long do locals live?::    
 1528: * Programming Style::           
 1529: * Implementation::              
 1530: @end menu
 1532: @node Where are locals visible by name?, How long do locals live?, Gforth locals, Gforth locals
 1533: @subsubsection Where are locals visible by name?
 1535: Basically, the answer is that locals are visible where you would expect
 1536: it in block-structured languages, and sometimes a little longer. If you
 1537: want to restrict the scope of a local, enclose its definition in
 1538: @code{SCOPE}...@code{ENDSCOPE}.
 1540: doc-scope
 1541: doc-endscope
 1543: These words behave like control structure words, so you can use them
 1544: with @code{CS-PICK} and @code{CS-ROLL} to restrict the scope in
 1545: arbitrary ways.
 1547: If you want a more exact answer to the visibility question, here's the
 1548: basic principle: A local is visible in all places that can only be
 1549: reached through the definition of the local@footnote{In compiler
 1550: construction terminology, all places dominated by the definition of the
 1551: local.}. In other words, it is not visible in places that can be reached
 1552: without going through the definition of the local. E.g., locals defined
 1553: in @code{IF}...@code{ENDIF} are visible until the @code{ENDIF}, locals
 1554: defined in @code{BEGIN}...@code{UNTIL} are visible after the
 1555: @code{UNTIL} (until, e.g., a subsequent @code{ENDSCOPE}).
 1557: The reasoning behind this solution is: We want to have the locals
 1558: visible as long as it is meaningful. The user can always make the
 1559: visibility shorter by using explicit scoping. In a place that can
 1560: only be reached through the definition of a local, the meaning of a
 1561: local name is clear. In other places it is not: How is the local
 1562: initialized at the control flow path that does not contain the
 1563: definition? Which local is meant, if the same name is defined twice in
 1564: two independent control flow paths?
 1566: This should be enough detail for nearly all users, so you can skip the
 1567: rest of this section. If you relly must know all the gory details and
 1568: options, read on.
 1570: In order to implement this rule, the compiler has to know which places
 1571: are unreachable. It knows this automatically after @code{AHEAD},
 1572: @code{AGAIN}, @code{EXIT} and @code{LEAVE}; in other cases (e.g., after
 1573: most @code{THROW}s), you can use the word @code{UNREACHABLE} to tell the
 1574: compiler that the control flow never reaches that place. If
 1575: @code{UNREACHABLE} is not used where it could, the only consequence is
 1576: that the visibility of some locals is more limited than the rule above
 1577: says. If @code{UNREACHABLE} is used where it should not (i.e., if you
 1578: lie to the compiler), buggy code will be produced.
 1580: Another problem with this rule is that at @code{BEGIN}, the compiler
 1581: does not know which locals will be visible on the incoming
 1582: back-edge. All problems discussed in the following are due to this
 1583: ignorance of the compiler (we discuss the problems using @code{BEGIN}
 1584: loops as examples; the discussion also applies to @code{?DO} and other
 1585: loops). Perhaps the most insidious example is:
 1586: @example
 1587: AHEAD
 1588: BEGIN
 1589:   x
 1590: [ 1 CS-ROLL ] THEN
 1591:   @{ x @}
 1592:   ...
 1593: UNTIL
 1594: @end example
 1596: This should be legal according to the visibility rule. The use of
 1597: @code{x} can only be reached through the definition; but that appears
 1598: textually below the use.
 1600: From this example it is clear that the visibility rules cannot be fully
 1601: implemented without major headaches. Our implementation treats common
 1602: cases as advertised and the exceptions are treated in a safe way: The
 1603: compiler makes a reasonable guess about the locals visible after a
 1604: @code{BEGIN}; if it is too pessimistic, the
 1605: user will get a spurious error about the local not being defined; if the
 1606: compiler is too optimistic, it will notice this later and issue a
 1607: warning. In the case above the compiler would complain about @code{x}
 1608: being undefined at its use. You can see from the obscure examples in
 1609: this section that it takes quite unusual control structures to get the
 1610: compiler into trouble, and even then it will often do fine.
 1612: If the @code{BEGIN} is reachable from above, the most optimistic guess
 1613: is that all locals visible before the @code{BEGIN} will also be
 1614: visible after the @code{BEGIN}. This guess is valid for all loops that
 1615: are entered only through the @code{BEGIN}, in particular, for normal
 1616: @code{BEGIN}...@code{WHILE}...@code{REPEAT} and
 1617: @code{BEGIN}...@code{UNTIL} loops and it is implemented in our
 1618: compiler. When the branch to the @code{BEGIN} is finally generated by
 1619: @code{AGAIN} or @code{UNTIL}, the compiler checks the guess and
 1620: warns the user if it was too optimisitic:
 1621: @example
 1622: IF
 1623:   @{ x @}
 1624: BEGIN
 1625:   \ x ? 
 1626: [ 1 cs-roll ] THEN
 1627:   ...
 1628: UNTIL
 1629: @end example
 1631: Here, @code{x} lives only until the @code{BEGIN}, but the compiler
 1632: optimistically assumes that it lives until the @code{THEN}. It notices
 1633: this difference when it compiles the @code{UNTIL} and issues a
 1634: warning. The user can avoid the warning, and make sure that @code{x}
 1635: is not used in the wrong area by using explicit scoping:
 1636: @example
 1637: IF
 1638:   SCOPE
 1639:   @{ x @}
 1640:   ENDSCOPE
 1641: BEGIN
 1642: [ 1 cs-roll ] THEN
 1643:   ...
 1644: UNTIL
 1645: @end example
 1647: Since the guess is optimistic, there will be no spurious error messages
 1648: about undefined locals.
 1650: If the @code{BEGIN} is not reachable from above (e.g., after
 1651: @code{AHEAD} or @code{EXIT}), the compiler cannot even make an
 1652: optimistic guess, as the locals visible after the @code{BEGIN} may be
 1653: defined later. Therefore, the compiler assumes that no locals are
 1654: visible after the @code{BEGIN}. However, the user can use
 1655: @code{ASSUME-LIVE} to make the compiler assume that the same locals are
 1656: visible at the BEGIN as at the point where the top control-flow stack
 1657: item was created.
 1659: doc-assume-live
 1661: E.g.,
 1662: @example
 1663: @{ x @}
 1664: AHEAD
 1666: BEGIN
 1667:   x
 1668: [ 1 CS-ROLL ] THEN
 1669:   ...
 1670: UNTIL
 1671: @end example
 1673: Other cases where the locals are defined before the @code{BEGIN} can be
 1674: handled by inserting an appropriate @code{CS-ROLL} before the
 1675: @code{ASSUME-LIVE} (and changing the control-flow stack manipulation
 1676: behind the @code{ASSUME-LIVE}).
 1678: Cases where locals are defined after the @code{BEGIN} (but should be
 1679: visible immediately after the @code{BEGIN}) can only be handled by
 1680: rearranging the loop. E.g., the ``most insidious'' example above can be
 1681: arranged into:
 1682: @example
 1683: BEGIN
 1684:   @{ x @}
 1685:   ... 0=
 1686: WHILE
 1687:   x
 1688: REPEAT
 1689: @end example
 1691: @node How long do locals live?, Programming Style, Where are locals visible by name?, Gforth locals
 1692: @subsubsection How long do locals live?
 1694: The right answer for the lifetime question would be: A local lives at
 1695: least as long as it can be accessed. For a value-flavoured local this
 1696: means: until the end of its visibility. However, a variable-flavoured
 1697: local could be accessed through its address far beyond its visibility
 1698: scope. Ultimately, this would mean that such locals would have to be
 1699: garbage collected. Since this entails un-Forth-like implementation
 1700: complexities, I adopted the same cowardly solution as some other
 1701: languages (e.g., C): The local lives only as long as it is visible;
 1702: afterwards its address is invalid (and programs that access it
 1703: afterwards are erroneous).
 1705: @node Programming Style, Implementation, How long do locals live?, Gforth locals
 1706: @subsubsection Programming Style
 1708: The freedom to define locals anywhere has the potential to change
 1709: programming styles dramatically. In particular, the need to use the
 1710: return stack for intermediate storage vanishes. Moreover, all stack
 1711: manipulations (except @code{PICK}s and @code{ROLL}s with run-time
 1712: determined arguments) can be eliminated: If the stack items are in the
 1713: wrong order, just write a locals definition for all of them; then
 1714: write the items in the order you want.
 1716: This seems a little far-fetched and eliminating stack manipulations is
 1717: unlikely to become a conscious programming objective. Still, the number
 1718: of stack manipulations will be reduced dramatically if local variables
 1719: are used liberally (e.g., compare @code{max} in @ref{Gforth locals} with
 1720: a traditional implementation of @code{max}).
 1722: This shows one potential benefit of locals: making Forth programs more
 1723: readable. Of course, this benefit will only be realized if the
 1724: programmers continue to honour the principle of factoring instead of
 1725: using the added latitude to make the words longer.
 1727: Using @code{TO} can and should be avoided.  Without @code{TO},
 1728: every value-flavoured local has only a single assignment and many
 1729: advantages of functional languages apply to Forth. I.e., programs are
 1730: easier to analyse, to optimize and to read: It is clear from the
 1731: definition what the local stands for, it does not turn into something
 1732: different later.
 1734: E.g., a definition using @code{TO} might look like this:
 1735: @example
 1736: : strcmp @{ addr1 u1 addr2 u2 -- n @}
 1737:  u1 u2 min 0
 1738:  ?do
 1739:    addr1 c@ addr2 c@ - ?dup
 1740:    if
 1741:      unloop exit
 1742:    then
 1743:    addr1 char+ TO addr1
 1744:    addr2 char+ TO addr2
 1745:  loop
 1746:  u1 u2 - ;
 1747: @end example
 1748: Here, @code{TO} is used to update @code{addr1} and @code{addr2} at
 1749: every loop iteration. @code{strcmp} is a typical example of the
 1750: readability problems of using @code{TO}. When you start reading
 1751: @code{strcmp}, you think that @code{addr1} refers to the start of the
 1752: string. Only near the end of the loop you realize that it is something
 1753: else.
 1755: This can be avoided by defining two locals at the start of the loop that
 1756: are initialized with the right value for the current iteration.
 1757: @example
 1758: : strcmp @{ addr1 u1 addr2 u2 -- n @}
 1759:  addr1 addr2
 1760:  u1 u2 min 0 
 1761:  ?do @{ s1 s2 @}
 1762:    s1 c@ s2 c@ - ?dup 
 1763:    if
 1764:      unloop exit
 1765:    then
 1766:    s1 char+ s2 char+
 1767:  loop
 1768:  2drop
 1769:  u1 u2 - ;
 1770: @end example
 1771: Here it is clear from the start that @code{s1} has a different value
 1772: in every loop iteration.
 1774: @node Implementation,  , Programming Style, Gforth locals
 1775: @subsubsection Implementation
 1777: Gforth uses an extra locals stack. The most compelling reason for
 1778: this is that the return stack is not float-aligned; using an extra stack
 1779: also eliminates the problems and restrictions of using the return stack
 1780: as locals stack. Like the other stacks, the locals stack grows toward
 1781: lower addresses. A few primitives allow an efficient implementation:
 1783: doc-@local#
 1784: doc-f@local#
 1785: doc-laddr#
 1786: doc-lp+!#
 1787: doc-lp!
 1788: doc->l
 1789: doc-f>l
 1791: In addition to these primitives, some specializations of these
 1792: primitives for commonly occurring inline arguments are provided for
 1793: efficiency reasons, e.g., @code{@@local0} as specialization of
 1794: @code{@@local#} for the inline argument 0. The following compiling words
 1795: compile the right specialized version, or the general version, as
 1796: appropriate:
 1798: doc-compile-@local
 1799: doc-compile-f@local
 1800: doc-compile-lp+!
 1802: Combinations of conditional branches and @code{lp+!#} like
 1803: @code{?branch-lp+!#} (the locals pointer is only changed if the branch
 1804: is taken) are provided for efficiency and correctness in loops.
 1806: A special area in the dictionary space is reserved for keeping the
 1807: local variable names. @code{@{} switches the dictionary pointer to this
 1808: area and @code{@}} switches it back and generates the locals
 1809: initializing code. @code{W:} etc.@ are normal defining words. This
 1810: special area is cleared at the start of every colon definition.
 1812: A special feature of Gforth's dictionary is used to implement the
 1813: definition of locals without type specifiers: every wordlist (aka
 1814: vocabulary) has its own methods for searching
 1815: etc. (@pxref{Wordlists}). For the present purpose we defined a wordlist
 1816: with a special search method: When it is searched for a word, it
 1817: actually creates that word using @code{W:}. @code{@{} changes the search
 1818: order to first search the wordlist containing @code{@}}, @code{W:} etc.,
 1819: and then the wordlist for defining locals without type specifiers.
 1821: The lifetime rules support a stack discipline within a colon
 1822: definition: The lifetime of a local is either nested with other locals
 1823: lifetimes or it does not overlap them.
 1825: At @code{BEGIN}, @code{IF}, and @code{AHEAD} no code for locals stack
 1826: pointer manipulation is generated. Between control structure words
 1827: locals definitions can push locals onto the locals stack. @code{AGAIN}
 1828: is the simplest of the other three control flow words. It has to
 1829: restore the locals stack depth of the corresponding @code{BEGIN}
 1830: before branching. The code looks like this:
 1831: @format
 1832: @code{lp+!#} current-locals-size @minus{} dest-locals-size
 1833: @code{branch} <begin>
 1834: @end format
 1836: @code{UNTIL} is a little more complicated: If it branches back, it
 1837: must adjust the stack just like @code{AGAIN}. But if it falls through,
 1838: the locals stack must not be changed. The compiler generates the
 1839: following code:
 1840: @format
 1841: @code{?branch-lp+!#} <begin> current-locals-size @minus{} dest-locals-size
 1842: @end format
 1843: The locals stack pointer is only adjusted if the branch is taken.
 1845: @code{THEN} can produce somewhat inefficient code:
 1846: @format
 1847: @code{lp+!#} current-locals-size @minus{} orig-locals-size
 1848: <orig target>:
 1849: @code{lp+!#} orig-locals-size @minus{} new-locals-size
 1850: @end format
 1851: The second @code{lp+!#} adjusts the locals stack pointer from the
 1852: level at the @var{orig} point to the level after the @code{THEN}. The
 1853: first @code{lp+!#} adjusts the locals stack pointer from the current
 1854: level to the level at the orig point, so the complete effect is an
 1855: adjustment from the current level to the right level after the
 1856: @code{THEN}.
 1858: In a conventional Forth implementation a dest control-flow stack entry
 1859: is just the target address and an orig entry is just the address to be
 1860: patched. Our locals implementation adds a wordlist to every orig or dest
 1861: item. It is the list of locals visible (or assumed visible) at the point
 1862: described by the entry. Our implementation also adds a tag to identify
 1863: the kind of entry, in particular to differentiate between live and dead
 1864: (reachable and unreachable) orig entries.
 1866: A few unusual operations have to be performed on locals wordlists:
 1868: doc-common-list
 1869: doc-sub-list?
 1870: doc-list-size
 1872: Several features of our locals wordlist implementation make these
 1873: operations easy to implement: The locals wordlists are organised as
 1874: linked lists; the tails of these lists are shared, if the lists
 1875: contain some of the same locals; and the address of a name is greater
 1876: than the address of the names behind it in the list.
 1878: Another important implementation detail is the variable
 1879: @code{dead-code}. It is used by @code{BEGIN} and @code{THEN} to
 1880: determine if they can be reached directly or only through the branch
 1881: that they resolve. @code{dead-code} is set by @code{UNREACHABLE},
 1882: @code{AHEAD}, @code{EXIT} etc., and cleared at the start of a colon
 1883: definition, by @code{BEGIN} and usually by @code{THEN}.
 1885: Counted loops are similar to other loops in most respects, but
 1886: @code{LEAVE} requires special attention: It performs basically the same
 1887: service as @code{AHEAD}, but it does not create a control-flow stack
 1888: entry. Therefore the information has to be stored elsewhere;
 1889: traditionally, the information was stored in the target fields of the
 1890: branches created by the @code{LEAVE}s, by organizing these fields into a
 1891: linked list. Unfortunately, this clever trick does not provide enough
 1892: space for storing our extended control flow information. Therefore, we
 1893: introduce another stack, the leave stack. It contains the control-flow
 1894: stack entries for all unresolved @code{LEAVE}s.
 1896: Local names are kept until the end of the colon definition, even if
 1897: they are no longer visible in any control-flow path. In a few cases
 1898: this may lead to increased space needs for the locals name area, but
 1899: usually less than reclaiming this space would cost in code size.
 1902: @node ANS Forth locals,  , Gforth locals, Locals
 1903: @subsection ANS Forth locals
 1905: The ANS Forth locals wordset does not define a syntax for locals, but
 1906: words that make it possible to define various syntaxes. One of the
 1907: possible syntaxes is a subset of the syntax we used in the Gforth locals
 1908: wordset, i.e.:
 1910: @example
 1911: @{ local1 local2 ... -- comment @}
 1912: @end example
 1913: or
 1914: @example
 1915: @{ local1 local2 ... @}
 1916: @end example
 1918: The order of the locals corresponds to the order in a stack comment. The
 1919: restrictions are:
 1921: @itemize @bullet
 1922: @item
 1923: Locals can only be cell-sized values (no type specifiers are allowed).
 1924: @item
 1925: Locals can be defined only outside control structures.
 1926: @item
 1927: Locals can interfere with explicit usage of the return stack. For the
 1928: exact (and long) rules, see the standard. If you don't use return stack
 1929: accessing words in a definition using locals, you will be all right. The
 1930: purpose of this rule is to make locals implementation on the return
 1931: stack easier.
 1932: @item
 1933: The whole definition must be in one line.
 1934: @end itemize
 1936: Locals defined in this way behave like @code{VALUE}s
 1937: (@xref{Values}). I.e., they are initialized from the stack. Using their
 1938: name produces their value. Their value can be changed using @code{TO}.
 1940: Since this syntax is supported by Gforth directly, you need not do
 1941: anything to use it. If you want to port a program using this syntax to
 1942: another ANS Forth system, use @file{anslocal.fs} to implement the syntax
 1943: on the other system.
 1945: Note that a syntax shown in the standard, section A.13 looks
 1946: similar, but is quite different in having the order of locals
 1947: reversed. Beware!
 1949: The ANS Forth locals wordset itself consists of the following word
 1951: doc-(local)
 1953: The ANS Forth locals extension wordset defines a syntax, but it is so
 1954: awful that we strongly recommend not to use it. We have implemented this
 1955: syntax to make porting to Gforth easy, but do not document it here. The
 1956: problem with this syntax is that the locals are defined in an order
 1957: reversed with respect to the standard stack comment notation, making
 1958: programs harder to read, and easier to misread and miswrite. The only
 1959: merit of this syntax is that it is easy to implement using the ANS Forth
 1960: locals wordset.
 1962: @node Defining Words, Wordlists, Locals, Words
 1963: @section Defining Words
 1965: @menu
 1966: * Values::                      
 1967: @end menu
 1969: @node Values,  , Defining Words, Defining Words
 1970: @subsection Values
 1972: @node Wordlists, Files, Defining Words, Words
 1973: @section Wordlists
 1975: @node Files, Blocks, Wordlists, Words
 1976: @section Files
 1978: @node Blocks, Other I/O, Files, Words
 1979: @section Blocks
 1981: @node Other I/O, Programming Tools, Blocks, Words
 1982: @section Other I/O
 1984: @node Programming Tools, Assembler and Code words, Other I/O, Words
 1985: @section Programming Tools
 1987: @menu
 1988: * Debugging::                   Simple and quick.
 1989: * Assertions::                  Making your programs self-checking.
 1990: @end menu
 1992: @node Debugging, Assertions, Programming Tools, Programming Tools
 1993: @subsection Debugging
 1995: The simple debugging aids provided in @file{debugging.fs}
 1996: are meant to support a different style of debugging than the
 1997: tracing/stepping debuggers used in languages with long turn-around
 1998: times.
 2000: A much better (faster) way in fast-compilig languages is to add
 2001: printing code at well-selected places, let the program run, look at
 2002: the output, see where things went wrong, add more printing code, etc.,
 2003: until the bug is found.
 2005: The word @code{~~} is easy to insert. It just prints debugging
 2006: information (by default the source location and the stack contents). It
 2007: is also easy to remove (@kbd{C-x ~} in the Emacs Forth mode to
 2008: query-replace them with nothing). The deferred words
 2009: @code{printdebugdata} and @code{printdebugline} control the output of
 2010: @code{~~}. The default source location output format works well with
 2011: Emacs' compilation mode, so you can step through the program at the
 2012: source level using @kbd{C-x `} (the advantage over a stepping debugger
 2013: is that you can step in any direction and you know where the crash has
 2014: happened or where the strange data has occurred).
 2016: Note that the default actions clobber the contents of the pictured
 2017: numeric output string, so you should not use @code{~~}, e.g., between
 2018: @code{<#} and @code{#>}.
 2020: doc-~~
 2021: doc-printdebugdata
 2022: doc-printdebugline
 2024: @node Assertions,  , Debugging, Programming Tools
 2025: @subsection Assertions
 2027: It is a good idea to make your programs self-checking, in particular, if
 2028: you use an assumption (e.g., that a certain field of a data structure is
 2029: never zero) that may become wrong during maintenance. Gforth supports
 2030: assertions for this purpose. They are used like this:
 2032: @example
 2033: assert( @var{flag} )
 2034: @end example
 2036: The code between @code{assert(} and @code{)} should compute a flag, that
 2037: should be true if everything is alright and false otherwise. It should
 2038: not change anything else on the stack. The overall stack effect of the
 2039: assertion is @code{( -- )}. E.g.
 2041: @example
 2042: assert( 1 1 + 2 = ) \ what we learn in school
 2043: assert( dup 0<> ) \ assert that the top of stack is not zero
 2044: assert( false ) \ this code should not be reached
 2045: @end example
 2047: The need for assertions is different at different times. During
 2048: debugging, we want more checking, in production we sometimes care more
 2049: for speed. Therefore, assertions can be turned off, i.e., the assertion
 2050: becomes a comment. Depending on the importance of an assertion and the
 2051: time it takes to check it, you may want to turn off some assertions and
 2052: keep others turned on. Gforth provides several levels of assertions for
 2053: this purpose:
 2055: doc-assert0(
 2056: doc-assert1(
 2057: doc-assert2(
 2058: doc-assert3(
 2059: doc-assert(
 2060: doc-)
 2062: @code{Assert(} is the same as @code{assert1(}. The variable
 2063: @code{assert-level} specifies the highest assertions that are turned
 2064: on. I.e., at the default @code{assert-level} of one, @code{assert0(} and
 2065: @code{assert1(} assertions perform checking, while @code{assert2(} and
 2066: @code{assert3(} assertions are treated as comments.
 2068: Note that the @code{assert-level} is evaluated at compile-time, not at
 2069: run-time. I.e., you cannot turn assertions on or off at run-time, you
 2070: have to set the @code{assert-level} appropriately before compiling a
 2071: piece of code. You can compile several pieces of code at several
 2072: @code{assert-level}s (e.g., a trusted library at level 1 and newly
 2073: written code at level 3).
 2075: doc-assert-level
 2077: If an assertion fails, a message compatible with Emacs' compilation mode
 2078: is produced and the execution is aborted (currently with @code{ABORT"}.
 2079: If there is interest, we will introduce a special throw code. But if you
 2080: intend to @code{catch} a specific condition, using @code{throw} is
 2081: probably more appropriate than an assertion).
 2083: @node Assembler and Code words, Threading Words, Programming Tools, Words
 2084: @section Assembler and Code words
 2086: Gforth provides some words for defining primitives (words written in
 2087: machine code), and for defining the the machine-code equivalent of
 2088: @code{DOES>}-based defining words. However, the machine-independent
 2089: nature of Gforth poses a few problems: First of all. Gforth runs on
 2090: several architectures, so it can provide no standard assembler. What's
 2091: worse is that the register allocation not only depends on the processor,
 2092: but also on the @code{gcc} version and options used.
 2094: The words that Gforth offers encapsulate some system dependences (e.g., the
 2095: header structure), so a system-independent assembler may be used in
 2096: Gforth. If you do not have an assembler, you can compile machine code
 2097: directly with @code{,} and @code{c,}.
 2099: doc-assembler
 2100: doc-code
 2101: doc-end-code
 2102: doc-;code
 2103: doc-flush-icache
 2105: If @code{flush-icache} does not work correctly, @code{code} words
 2106: etc. will not work (reliably), either.
 2108: These words are rarely used. Therefore they reside in @code{code.fs},
 2109: which is usually not loaded (except @code{flush-icache}, which is always
 2110: present). You can load them with @code{require code.fs}.
 2112: In the assembly code you will want to refer to the inner interpreter's
 2113: registers (e.g., the data stack pointer) and you may want to use other
 2114: registers for temporary storage. Unfortunately, the register allocation
 2115: is installation-dependent.
 2117: The easiest solution is to use explicit register declarations
 2118: (@pxref{Explicit Reg Vars, , Variables in Specified Registers,,
 2119: GNU C Manual}) for all of the inner interpreter's registers: You have to
 2120: compile Gforth with @code{-DFORCE_REG} (configure option
 2121: @code{--enable-force-reg}) and the appropriate declarations must be
 2122: present in the @code{machine.h} file (see @code{mips.h} for an example;
 2123: you can find a full list of all declarable register symbols with
 2124: @code{grep register engine.c}). If you give explicit registers to all
 2125: variables that are declared at the beginning of @code{engine()}, you
 2126: should be able to use the other caller-saved registers for temporary
 2127: storage. Alternatively, you can use the @code{gcc} option
 2128: @code{-ffixed-REG} (@pxref{Code Gen Options, , Options for Code
 2129: Generation Conventions,, GNU C Manual}) to reserve a register
 2130: (however, this restriction on register allocation may slow Gforth
 2131: significantly).
 2133: If this solution is not viable (e.g., because @code{gcc} does not allow
 2134: you to explicitly declare all the registers you need), you have to find
 2135: out by looking at the code where the inner interpreter's registers
 2136: reside and which registers can be used for temporary storage. You can
 2137: get an assembly listing of the engine's code with @code{make engine.s}.
 2139: In any case, it is good practice to abstract your assembly code from the
 2140: actual register allocation. E.g., if the data stack pointer resides in
 2141: register @code{$17}, create an alias for this register called @code{sp},
 2142: and use that in your assembly code.
 2144: Another option for implementing normal and defining words efficiently
 2145: is: adding the wanted functionality to the source of Gforth. For normal
 2146: words you just have to edit @file{primitives}, defining words (for fast
 2147: defined words) may require changes in @file{engine.c},
 2148: @file{kernal.fs}, @file{prims2x.fs}, and possibly @file{cross.fs}.
 2151: @node Threading Words,  , Assembler and Code words, Words
 2152: @section Threading Words
 2154: These words provide access to code addresses and other threading stuff
 2155: in Gforth (and, possibly, other interpretive Forths). It more or less
 2156: abstracts away the differences between direct and indirect threading
 2157: (and, for direct threading, the machine dependences). However, at
 2158: present this wordset is still inclomplete. It is also pretty low-level;
 2159: some day it will hopefully be made unnecessary by an internals words set
 2160: that abstracts implementation details away completely.
 2162: doc->code-address
 2163: doc->does-code
 2164: doc-code-address!
 2165: doc-does-code!
 2166: doc-does-handler!
 2167: doc-/does-handler
 2169: The code addresses produced by various defining words are produced by
 2170: the following words:
 2172: doc-docol:
 2173: doc-docon:
 2174: doc-dovar:
 2175: doc-douser:
 2176: doc-dodefer:
 2177: doc-dofield:
 2179: Currently there is no installation-independent way for recogizing words
 2180: defined by a @code{CREATE}...@code{DOES>} word; however, once you know
 2181: that a word is defined by a @code{CREATE}...@code{DOES>} word, you can
 2182: use @code{>DOES-CODE}.
 2184: @node ANS conformance, Model, Words, Top
 2185: @chapter ANS conformance
 2187: To the best of our knowledge, Gforth is an
 2189: ANS Forth System
 2190: @itemize
 2191: @item providing the Core Extensions word set
 2192: @item providing the Block word set
 2193: @item providing the Block Extensions word set
 2194: @item providing the Double-Number word set
 2195: @item providing the Double-Number Extensions word set
 2196: @item providing the Exception word set
 2197: @item providing the Exception Extensions word set
 2198: @item providing the Facility word set
 2199: @item providing @code{MS} and @code{TIME&DATE} from the Facility Extensions word set
 2200: @item providing the File Access word set
 2201: @item providing the File Access Extensions word set
 2202: @item providing the Floating-Point word set
 2203: @item providing the Floating-Point Extensions word set
 2204: @item providing the Locals word set
 2205: @item providing the Locals Extensions word set
 2206: @item providing the Memory-Allocation word set
 2207: @item providing the Memory-Allocation Extensions word set (that one's easy)
 2208: @item providing the Programming-Tools word set
 2209: @item providing @code{;code}, @code{AHEAD}, @code{ASSEMBLER}, @code{BYE}, @code{CODE}, @code{CS-PICK}, @code{CS-ROLL}, @code{STATE}, @code{[ELSE]}, @code{[IF]}, @code{[THEN]} from the Programming-Tools Extensions word set
 2210: @item providing the Search-Order word set
 2211: @item providing the Search-Order Extensions word set
 2212: @item providing the String word set
 2213: @item providing the String Extensions word set (another easy one)
 2214: @end itemize
 2216: In addition, ANS Forth systems are required to document certain
 2217: implementation choices. This chapter tries to meet these
 2218: requirements. In many cases it gives a way to ask the system for the
 2219: information instead of providing the information directly, in
 2220: particular, if the information depends on the processor, the operating
 2221: system or the installation options chosen, or if they are likely to
 2222: change during the maintenance of Gforth.
 2224: @comment The framework for the rest has been taken from pfe.
 2226: @menu
 2227: * The Core Words::              
 2228: * The optional Block word set::  
 2229: * The optional Double Number word set::  
 2230: * The optional Exception word set::  
 2231: * The optional Facility word set::  
 2232: * The optional File-Access word set::  
 2233: * The optional Floating-Point word set::  
 2234: * The optional Locals word set::  
 2235: * The optional Memory-Allocation word set::  
 2236: * The optional Programming-Tools word set::  
 2237: * The optional Search-Order word set::  
 2238: @end menu
 2241: @c =====================================================================
 2242: @node The Core Words, The optional Block word set, ANS conformance, ANS conformance
 2243: @comment  node-name,  next,  previous,  up
 2244: @section The Core Words
 2245: @c =====================================================================
 2247: @menu
 2248: * core-idef::                   Implementation Defined Options                   
 2249: * core-ambcond::                Ambiguous Conditions                
 2250: * core-other::                  Other System Documentation                  
 2251: @end menu
 2253: @c ---------------------------------------------------------------------
 2254: @node core-idef, core-ambcond, The Core Words, The Core Words
 2255: @subsection Implementation Defined Options
 2256: @c ---------------------------------------------------------------------
 2258: @table @i
 2260: @item (Cell) aligned addresses:
 2261: processor-dependent. Gforth's alignment words perform natural alignment
 2262: (e.g., an address aligned for a datum of size 8 is divisible by
 2263: 8). Unaligned accesses usually result in a @code{-23 THROW}.
 2265: @item @code{EMIT} and non-graphic characters:
 2266: The character is output using the C library function (actually, macro)
 2267: @code{putchar}.
 2269: @item character editing of @code{ACCEPT} and @code{EXPECT}:
 2270: This is modeled on the GNU readline library (@pxref{Readline
 2271: Interaction, , Command Line Editing, readline, The GNU Readline
 2272: Library}) with Emacs-like key bindings. @kbd{Tab} deviates a little by
 2273: producing a full word completion every time you type it (instead of
 2274: producing the common prefix of all completions).
 2276: @item character set:
 2277: The character set of your computer and display device. Gforth is
 2278: 8-bit-clean (but some other component in your system may make trouble).
 2280: @item Character-aligned address requirements:
 2281: installation-dependent. Currently a character is represented by a C
 2282: @code{unsigned char}; in the future we might switch to @code{wchar_t}
 2283: (Comments on that requested).
 2285: @item character-set extensions and matching of names:
 2286: Any character except the ASCII NUL charcter can be used in a
 2287: name. Matching is case-insensitive. The matching is performed using the
 2288: C function @code{strncasecmp}, whose function is probably influenced by
 2289: the locale. E.g., the @code{C} locale does not know about accents and
 2290: umlauts, so they are matched case-sensitively in that locale. For
 2291: portability reasons it is best to write programs such that they work in
 2292: the @code{C} locale. Then one can use libraries written by a Polish
 2293: programmer (who might use words containing ISO Latin-2 encoded
 2294: characters) and by a French programmer (ISO Latin-1) in the same program
 2295: (of course, @code{WORDS} will produce funny results for some of the
 2296: words (which ones, depends on the font you are using)). Also, the locale
 2297: you prefer may not be available in other operating systems. Hopefully,
 2298: Unicode will solve these problems one day.
 2300: @item conditions under which control characters match a space delimiter:
 2301: If @code{WORD} is called with the space character as a delimiter, all
 2302: white-space characters (as identified by the C macro @code{isspace()})
 2303: are delimiters. @code{PARSE}, on the other hand, treats space like other
 2304: delimiters. @code{PARSE-WORD} treats space like @code{WORD}, but behaves
 2305: like @code{PARSE} otherwise. @code{(NAME)}, which is used by the outer
 2306: interpreter (aka text interpreter) by default, treats all white-space
 2307: characters as delimiters.
 2309: @item format of the control flow stack:
 2310: The data stack is used as control flow stack. The size of a control flow
 2311: stack item in cells is given by the constant @code{cs-item-size}. At the
 2312: time of this writing, an item consists of a (pointer to a) locals list
 2313: (third), an address in the code (second), and a tag for identifying the
 2314: item (TOS). The following tags are used: @code{defstart},
 2315: @code{live-orig}, @code{dead-orig}, @code{dest}, @code{do-dest},
 2316: @code{scopestart}.
 2318: @item conversion of digits > 35
 2319: The characters @code{[\]^_'} are the digits with the decimal value
 2320: 36@minus{}41. There is no way to input many of the larger digits.
 2322: @item display after input terminates in @code{ACCEPT} and @code{EXPECT}:
 2323: The cursor is moved to the end of the entered string. If the input is
 2324: terminated using the @kbd{Return} key, a space is typed.
 2326: @item exception abort sequence of @code{ABORT"}:
 2327: The error string is stored into the variable @code{"error} and a
 2328: @code{-2 throw} is performed.
 2330: @item input line terminator:
 2331: For interactive input, @kbd{C-m} and @kbd{C-j} terminate lines. One of
 2332: these characters is typically produced when you type the @kbd{Enter} or
 2333: @kbd{Return} key.
 2335: @item maximum size of a counted string:
 2336: @code{s" /counted-string" environment? drop .}. Currently 255 characters
 2337: on all ports, but this may change.
 2339: @item maximum size of a parsed string:
 2340: Given by the constant @code{/line}. Currently 255 characters.
 2342: @item maximum size of a definition name, in characters:
 2343: 31
 2345: @item maximum string length for @code{ENVIRONMENT?}, in characters:
 2346: 31
 2348: @item method of selecting the user input device:
 2349: The user input device is the standard input. There is currently no way to
 2350: change it from within Gforth. However, the input can typically be
 2351: redirected in the command line that starts Gforth.
 2353: @item method of selecting the user output device:
 2354: The user output device is the standard output. It cannot be redirected
 2355: from within Gforth, but typically from the command line that starts
 2356: Gforth. Gforth uses buffered output, so output on a terminal does not
 2357: become visible before the next newline or buffer overflow. Output on
 2358: non-terminals is invisible until the buffer overflows.
 2360: @item methods of dictionary compilation:
 2361: What are we expected to document here?
 2363: @item number of bits in one address unit:
 2364: @code{s" address-units-bits" environment? drop .}. 8 in all current
 2365: ports.
 2367: @item number representation and arithmetic:
 2368: Processor-dependent. Binary two's complement on all current ports.
 2370: @item ranges for integer types:
 2371: Installation-dependent. Make environmental queries for @code{MAX-N},
 2372: @code{MAX-U}, @code{MAX-D} and @code{MAX-UD}. The lower bounds for
 2373: unsigned (and positive) types is 0. The lower bound for signed types on
 2374: two's complement and one's complement machines machines can be computed
 2375: by adding 1 to the upper bound.
 2377: @item read-only data space regions:
 2378: The whole Forth data space is writable.
 2380: @item size of buffer at @code{WORD}:
 2381: @code{PAD HERE - .}. 104 characters on 32-bit machines. The buffer is
 2382: shared with the pictured numeric output string. If overwriting
 2383: @code{PAD} is acceptable, it is as large as the remaining dictionary
 2384: space, although only as much can be sensibly used as fits in a counted
 2385: string.
 2387: @item size of one cell in address units:
 2388: @code{1 cells .}.
 2390: @item size of one character in address units:
 2391: @code{1 chars .}. 1 on all current ports.
 2393: @item size of the keyboard terminal buffer:
 2394: Varies. You can determine the size at a specific time using @code{lp@
 2395: tib - .}. It is shared with the locals stack and TIBs of files that
 2396: include the current file. You can change the amount of space for TIBs
 2397: and locals stack at Gforth startup with the command line option
 2398: @code{-l}.
 2400: @item size of the pictured numeric output buffer:
 2401: @code{PAD HERE - .}. 104 characters on 32-bit machines. The buffer is
 2402: shared with @code{WORD}.
 2404: @item size of the scratch area returned by @code{PAD}:
 2405: The remainder of dictionary space. You can even use the unused part of
 2406: the data stack space. The current size can be computed with @code{sp@
 2407: pad - .}.
 2409: @item system case-sensitivity characteristics:
 2410: Dictionary searches are case insensitive. However, as explained above
 2411: under @i{character-set extensions}, the matching for non-ASCII
 2412: characters is determined by the locale you are using. In the default
 2413: @code{C} locale all non-ASCII characters are matched case-sensitively.
 2415: @item system prompt:
 2416: @code{ ok} in interpret state, @code{ compiled} in compile state.
 2418: @item division rounding:
 2419: installation dependent. @code{s" floored" environment? drop .}. We leave
 2420: the choice to @code{gcc} (what to use for @code{/}) and to you (whether to use
 2421: @code{fm/mod}, @code{sm/rem} or simply @code{/}).
 2423: @item values of @code{STATE} when true:
 2424: -1.
 2426: @item values returned after arithmetic overflow:
 2427: On two's complement machines, arithmetic is performed modulo
 2428: 2**bits-per-cell for single arithmetic and 4**bits-per-cell for double
 2429: arithmetic (with appropriate mapping for signed types). Division by zero
 2430: typically results in a @code{-55 throw} (floatingpoint unidentified
 2431: fault), although a @code{-10 throw} (divide by zero) would be more
 2432: appropriate.
 2434: @item whether the current definition can be found after @t{DOES>}:
 2435: No.
 2437: @end table
 2439: @c ---------------------------------------------------------------------
 2440: @node core-ambcond, core-other, core-idef, The Core Words
 2441: @subsection Ambiguous conditions
 2442: @c ---------------------------------------------------------------------
 2444: @table @i
 2446: @item a name is neither a word nor a number:
 2447: @code{-13 throw} (Undefined word)
 2449: @item a definition name exceeds the maximum length allowed:
 2450: @code{-19 throw} (Word name too long)
 2452: @item addressing a region not inside the various data spaces of the forth system:
 2453: The stacks, code space and name space are accessible. Machine code space is
 2454: typically readable. Accessing other addresses gives results dependent on
 2455: the operating system. On decent systems: @code{-9 throw} (Invalid memory
 2456: address).
 2458: @item argument type incompatible with parameter:
 2459: This is usually not caught. Some words perform checks, e.g., the control
 2460: flow words, and issue a @code{ABORT"} or @code{-12 THROW} (Argument type
 2461: mismatch).
 2463: @item attempting to obtain the execution token of a word with undefined execution semantics:
 2464: You get an execution token representing the compilation semantics
 2465: instead.
 2467: @item dividing by zero:
 2468: typically results in a @code{-55 throw} (floating point unidentified
 2469: fault), although a @code{-10 throw} (divide by zero) would be more
 2470: appropriate.
 2472: @item insufficient data stack or return stack space:
 2473: Not checked. This typically results in mysterious illegal memory
 2474: accesses, producing @code{-9 throw} (Invalid memory address) or
 2475: @code{-23 throw} (Address alignment exception).
 2477: @item insufficient space for loop control parameters:
 2478: like other return stack overflows.
 2480: @item insufficient space in the dictionary:
 2481: Not checked. Similar results as stack overflows. However, typically the
 2482: error appears at a different place when one inserts or removes code.
 2484: @item interpreting a word with undefined interpretation semantics:
 2485: For some words, we defined interpretation semantics. For the others:
 2486: @code{-14 throw} (Interpreting a compile-only word). Note that this is
 2487: checked only by the outer (aka text) interpreter; if the word is
 2488: @code{execute}d in some other way, it will typically perform it's
 2489: compilation semantics even in interpret state. (We could change @code{'}
 2490: and relatives not to give the xt of such words, but we think that would
 2491: be too restrictive).
 2493: @item modifying the contents of the input buffer or a string literal:
 2494: These are located in writable memory and can be modified.
 2496: @item overflow of the pictured numeric output string:
 2497: Not checked.
 2499: @item parsed string overflow:
 2500: @code{PARSE} cannot overflow. @code{WORD} does not check for overflow.
 2502: @item producing a result out of range:
 2503: On two's complement machines, arithmetic is performed modulo
 2504: 2**bits-per-cell for single arithmetic and 4**bits-per-cell for double
 2505: arithmetic (with appropriate mapping for signed types). Division by zero
 2506: typically results in a @code{-55 throw} (floatingpoint unidentified
 2507: fault), although a @code{-10 throw} (divide by zero) would be more
 2508: appropriate. @code{convert} and @code{>number} currently overflow
 2509: silently.
 2511: @item reading from an empty data or return stack:
 2512: The data stack is checked by the outer (aka text) interpreter after
 2513: every word executed. If it has underflowed, a @code{-4 throw} (Stack
 2514: underflow) is performed. Apart from that, the stacks are not checked and
 2515: underflows can result in similar behaviour as overflows (of adjacent
 2516: stacks).
 2518: @item unexepected end of the input buffer, resulting in an attempt to use a zero-length string as a name:
 2519: @code{Create} and its descendants perform a @code{-16 throw} (Attempt to
 2520: use zero-length string as a name). Words like @code{'} probably will not
 2521: find what they search. Note that it is possible to create zero-length
 2522: names with @code{nextname} (should it not?).
 2524: @item @code{>IN} greater than input buffer:
 2525: The next invocation of a parsing word returns a string wih length 0.
 2527: @item @code{RECURSE} appears after @code{DOES>}:
 2528: Compiles a recursive call to the defining word not to the defined word.
 2530: @item argument input source different than current input source for @code{RESTORE-INPUT}:
 2531: @code{-12 THROW}. Note that, once an input file is closed (e.g., because
 2532: the end of the file was reached), its source-id may be
 2533: reused. Therefore, restoring an input source specification referencing a
 2534: closed file may lead to unpredictable results instead of a @code{-12
 2535: THROW}.
 2537: In the future, Gforth may be able to retore input source specifications
 2538: from other than the current input soruce.
 2540: @item data space containing definitions gets de-allocated:
 2541: Deallocation with @code{allot} is not checked. This typically resuls in
 2542: memory access faults or execution of illegal instructions.
 2544: @item data space read/write with incorrect alignment:
 2545: Processor-dependent. Typically results in a @code{-23 throw} (Address
 2546: alignment exception). Under Linux on a 486 or later processor with
 2547: alignment turned on, incorrect alignment results in a @code{-9 throw}
 2548: (Invalid memory address). There are reportedly some processors with
 2549: alignment restrictions that do not report them.
 2551: @item data space pointer not properly aligned, @code{,}, @code{C,}:
 2552: Like other alignment errors.
 2554: @item less than u+2 stack items (@code{PICK} and @code{ROLL}):
 2555: Not checked. May cause an illegal memory access.
 2557: @item loop control parameters not available:
 2558: Not checked. The counted loop words simply assume that the top of return
 2559: stack items are loop control parameters and behave accordingly.
 2561: @item most recent definition does not have a name (@code{IMMEDIATE}):
 2562: @code{abort" last word was headerless"}.
 2564: @item name not defined by @code{VALUE} used by @code{TO}:
 2565: @code{-32 throw} (Invalid name argument)
 2567: @item name not found (@code{'}, @code{POSTPONE}, @code{[']}, @code{[COMPILE]}):
 2568: @code{-13 throw} (Undefined word)
 2570: @item parameters are not of the same type (@code{DO}, @code{?DO}, @code{WITHIN}):
 2571: Gforth behaves as if they were of the same type. I.e., you can predict
 2572: the behaviour by interpreting all parameters as, e.g., signed.
 2574: @item @code{POSTPONE} or @code{[COMPILE]} applied to @code{TO}:
 2575: Assume @code{: X POSTPONE TO ; IMMEDIATE}. @code{X} is equivalent to
 2576: @code{TO}.
 2578: @item String longer than a counted string returned by @code{WORD}:
 2579: Not checked. The string will be ok, but the count will, of course,
 2580: contain only the least significant bits of the length.
 2582: @item u greater than or equal to the number of bits in a cell (@code{LSHIFT}, @code{RSHIFT}):
 2583: Processor-dependent. Typical behaviours are returning 0 and using only
 2584: the low bits of the shift count.
 2586: @item word not defined via @code{CREATE}:
 2587: @code{>BODY} produces the PFA of the word no matter how it was defined.
 2589: @code{DOES>} changes the execution semantics of the last defined word no
 2590: matter how it was defined. E.g., @code{CONSTANT DOES>} is equivalent to
 2591: @code{CREATE , DOES>}.
 2593: @item words improperly used outside @code{<#} and @code{#>}:
 2594: Not checked. As usual, you can expect memory faults.
 2596: @end table
 2599: @c ---------------------------------------------------------------------
 2600: @node core-other,  , core-ambcond, The Core Words
 2601: @subsection Other system documentation
 2602: @c ---------------------------------------------------------------------
 2604: @table @i
 2606: @item nonstandard words using @code{PAD}:
 2607: None.
 2609: @item operator's terminal facilities available:
 2610: After processing the command line, Gforth goes into interactive mode,
 2611: and you can give commands to Gforth interactively. The actual facilities
 2612: available depend on how you invoke Gforth.
 2614: @item program data space available:
 2615: @code{sp@ here - .} gives the space remaining for dictionary and data
 2616: stack together.
 2618: @item return stack space available:
 2619: By default 16 KBytes. The default can be overridden with the @code{-r}
 2620: switch (@pxref{Invocation}) when Gforth starts up.
 2622: @item stack space available:
 2623: @code{sp@ here - .} gives the space remaining for dictionary and data
 2624: stack together.
 2626: @item system dictionary space required, in address units:
 2627: Type @code{here forthstart - .} after startup. At the time of this
 2628: writing, this gives 70108 (bytes) on a 32-bit system.
 2629: @end table
 2632: @c =====================================================================
 2633: @node The optional Block word set, The optional Double Number word set, The Core Words, ANS conformance
 2634: @section The optional Block word set
 2635: @c =====================================================================
 2637: @menu
 2638: * block-idef::                  Implementation Defined Options                  
 2639: * block-ambcond::               Ambiguous Conditions               
 2640: * block-other::                 Other System Documentation                 
 2641: @end menu
 2644: @c ---------------------------------------------------------------------
 2645: @node block-idef, block-ambcond, The optional Block word set, The optional Block word set
 2646: @subsection Implementation Defined Options
 2647: @c ---------------------------------------------------------------------
 2649: @table @i
 2651: @item the format for display by @code{LIST}:
 2652: First the screen number is displayed, then 16 lines of 64 characters,
 2653: each line preceded by the line number.
 2655: @item the length of a line affected by @code{\}:
 2656: 64 characters.
 2657: @end table
 2660: @c ---------------------------------------------------------------------
 2661: @node block-ambcond, block-other, block-idef, The optional Block word set
 2662: @subsection Ambiguous conditions
 2663: @c ---------------------------------------------------------------------
 2665: @table @i
 2667: @item correct block read was not possible:
 2668: Typically results in a @code{throw} of some OS-derived value (between
 2669: -512 and -2048). If the blocks file was just not long enough, blanks are
 2670: supplied for the missing portion.
 2672: @item I/O exception in block transfer:
 2673: Typically results in a @code{throw} of some OS-derived value (between
 2674: -512 and -2048).
 2676: @item invalid block number:
 2677: @code{-35 throw} (Invalid block number)
 2679: @item a program directly alters the contents of @code{BLK}:
 2680: The input stream is switched to that other block, at the same
 2681: position. If the storing to @code{BLK} happens when interpreting
 2682: non-block input, the system will get quite confused when the block ends.
 2684: @item no current block buffer for @code{UPDATE}:
 2685: @code{UPDATE} has no effect.
 2687: @end table
 2690: @c ---------------------------------------------------------------------
 2691: @node block-other,  , block-ambcond, The optional Block word set
 2692: @subsection Other system documentation
 2693: @c ---------------------------------------------------------------------
 2695: @table @i
 2697: @item any restrictions a multiprogramming system places on the use of buffer addresses:
 2698: No restrictions (yet).
 2700: @item the number of blocks available for source and data:
 2701: depends on your disk space.
 2703: @end table
 2706: @c =====================================================================
 2707: @node The optional Double Number word set, The optional Exception word set, The optional Block word set, ANS conformance
 2708: @section The optional Double Number word set
 2709: @c =====================================================================
 2711: @menu
 2712: * double-ambcond::              Ambiguous Conditions              
 2713: @end menu
 2716: @c ---------------------------------------------------------------------
 2717: @node double-ambcond,  , The optional Double Number word set, The optional Double Number word set
 2718: @subsection Ambiguous conditions
 2719: @c ---------------------------------------------------------------------
 2721: @table @i
 2723: @item @var{d} outside of range of @var{n} in @code{D>S}:
 2724: The least significant cell of @var{d} is produced.
 2726: @end table
 2729: @c =====================================================================
 2730: @node The optional Exception word set, The optional Facility word set, The optional Double Number word set, ANS conformance
 2731: @section The optional Exception word set
 2732: @c =====================================================================
 2734: @menu
 2735: * exception-idef::              Implementation Defined Options              
 2736: @end menu
 2739: @c ---------------------------------------------------------------------
 2740: @node exception-idef,  , The optional Exception word set, The optional Exception word set
 2741: @subsection Implementation Defined Options
 2742: @c ---------------------------------------------------------------------
 2744: @table @i
 2745: @item @code{THROW}-codes used in the system:
 2746: The codes -256@minus{}-511 are used for reporting signals (see
 2747: @file{errore.fs}). The codes -512@minus{}-2047 are used for OS errors
 2748: (for file and memory allocation operations). The mapping from OS error
 2749: numbers to throw code is -512@minus{}@var{errno}. One side effect of
 2750: this mapping is that undefined OS errors produce a message with a
 2751: strange number; e.g., @code{-1000 THROW} results in @code{Unknown error
 2752: 488} on my system.
 2753: @end table
 2755: @c =====================================================================
 2756: @node The optional Facility word set, The optional File-Access word set, The optional Exception word set, ANS conformance
 2757: @section The optional Facility word set
 2758: @c =====================================================================
 2760: @menu
 2761: * facility-idef::               Implementation Defined Options               
 2762: * facility-ambcond::            Ambiguous Conditions            
 2763: @end menu
 2766: @c ---------------------------------------------------------------------
 2767: @node facility-idef, facility-ambcond, The optional Facility word set, The optional Facility word set
 2768: @subsection Implementation Defined Options
 2769: @c ---------------------------------------------------------------------
 2771: @table @i
 2773: @item encoding of keyboard events (@code{EKEY}):
 2774: Not yet implemeted.
 2776: @item duration of a system clock tick
 2777: System dependent. With respect to @code{MS}, the time is specified in
 2778: microseconds. How well the OS and the hardware implement this, is
 2779: another question.
 2781: @item repeatability to be expected from the execution of @code{MS}:
 2782: System dependent. On Unix, a lot depends on load. If the system is
 2783: lightly loaded, and the delay is short enough that Gforth does not get
 2784: swapped out, the performance should be acceptable. Under MS-DOS and
 2785: other single-tasking systems, it should be good.
 2787: @end table
 2790: @c ---------------------------------------------------------------------
 2791: @node facility-ambcond,  , facility-idef, The optional Facility word set
 2792: @subsection Ambiguous conditions
 2793: @c ---------------------------------------------------------------------
 2795: @table @i
 2797: @item @code{AT-XY} can't be performed on user output device:
 2798: Largely terminal dependant. No range checks are done on the arguments.
 2799: No errors are reported. You may see some garbage appearing, you may see
 2800: simply nothing happen.
 2802: @end table
 2805: @c =====================================================================
 2806: @node The optional File-Access word set, The optional Floating-Point word set, The optional Facility word set, ANS conformance
 2807: @section The optional File-Access word set
 2808: @c =====================================================================
 2810: @menu
 2811: * file-idef::                   Implementation Defined Options                   
 2812: * file-ambcond::                Ambiguous Conditions                
 2813: @end menu
 2816: @c ---------------------------------------------------------------------
 2817: @node file-idef, file-ambcond, The optional File-Access word set, The optional File-Access word set
 2818: @subsection Implementation Defined Options
 2819: @c ---------------------------------------------------------------------
 2821: @table @i
 2823: @item File access methods used:
 2824: @code{R/O}, @code{R/W} and @code{BIN} work as you would
 2825: expect. @code{W/O} translates into the C file opening mode @code{w} (or
 2826: @code{wb}): The file is cleared, if it exists, and created, if it does
 2827: not (both with @code{open-file} and @code{create-file}).  Under Unix
 2828: @code{create-file} creates a file with 666 permissions modified by your
 2829: umask.
 2831: @item file exceptions:
 2832: The file words do not raise exceptions (except, perhaps, memory access
 2833: faults when you pass illegal addresses or file-ids).
 2835: @item file line terminator:
 2836: System-dependent. Gforth uses C's newline character as line
 2837: terminator. What the actual character code(s) of this are is
 2838: system-dependent.
 2840: @item file name format
 2841: System dependent. Gforth just uses the file name format of your OS.
 2843: @item information returned by @code{FILE-STATUS}:
 2844: @code{FILE-STATUS} returns the most powerful file access mode allowed
 2845: for the file: Either @code{R/O}, @code{W/O} or @code{R/W}. If the file
 2846: cannot be accessed, @code{R/O BIN} is returned. @code{BIN} is applicable
 2847: along with the retured mode.
 2849: @item input file state after an exception when including source:
 2850: All files that are left via the exception are closed.
 2852: @item @var{ior} values and meaning:
 2853: The @var{ior}s returned by the file and memory allocation words are
 2854: intended as throw codes. They typically are in the range
 2855: -512@minus{}-2047 of OS errors.  The mapping from OS error numbers to
 2856: @var{ior}s is -512@minus{}@var{errno}.
 2858: @item maximum depth of file input nesting:
 2859: limited by the amount of return stack, locals/TIB stack, and the number
 2860: of open files available. This should not give you troubles.
 2862: @item maximum size of input line:
 2863: @code{/line}. Currently 255.
 2865: @item methods of mapping block ranges to files:
 2866: Currently, the block words automatically access the file
 2867: @file{blocks.fb} in the currend working directory. More sophisticated
 2868: methods could be implemented if there is demand (and a volunteer).
 2870: @item number of string buffers provided by @code{S"}:
 2871: 1
 2873: @item size of string buffer used by @code{S"}:
 2874: @code{/line}. currently 255.
 2876: @end table
 2878: @c ---------------------------------------------------------------------
 2879: @node file-ambcond,  , file-idef, The optional File-Access word set
 2880: @subsection Ambiguous conditions
 2881: @c ---------------------------------------------------------------------
 2883: @table @i
 2885: @item attempting to position a file outside it's boundaries:
 2886: @code{REPOSITION-FILE} is performed as usual: Afterwards,
 2887: @code{FILE-POSITION} returns the value given to @code{REPOSITION-FILE}.
 2889: @item attempting to read from file positions not yet written:
 2890: End-of-file, i.e., zero characters are read and no error is reported.
 2892: @item @var{file-id} is invalid (@code{INCLUDE-FILE}):
 2893: An appropriate exception may be thrown, but a memory fault or other
 2894: problem is more probable.
 2896: @item I/O exception reading or closing @var{file-id} (@code{include-file}, @code{included}):
 2897: The @var{ior} produced by the operation, that discovered the problem, is
 2898: thrown.
 2900: @item named file cannot be opened (@code{included}):
 2901: The @var{ior} produced by @code{open-file} is thrown.
 2903: @item requesting an unmapped block number:
 2904: There are no unmapped legal block numbers. On some operating systems,
 2905: writing a block with a large number may overflow the file system and
 2906: have an error message as consequence.
 2908: @item using @code{source-id} when @code{blk} is non-zero:
 2909: @code{source-id} performs its function. Typically it will give the id of
 2910: the source which loaded the block. (Better ideas?)
 2912: @end table
 2915: @c =====================================================================
 2916: @node  The optional Floating-Point word set, The optional Locals word set, The optional File-Access word set, ANS conformance
 2917: @section The optional Floating-Point word set
 2918: @c =====================================================================
 2920: @menu
 2921: * floating-idef::               Implementation Defined Options
 2922: * floating-ambcond::            Ambiguous Conditions            
 2923: @end menu
 2926: @c ---------------------------------------------------------------------
 2927: @node floating-idef, floating-ambcond, The optional Floating-Point word set, The optional Floating-Point word set
 2928: @subsection Implementation Defined Options
 2929: @c ---------------------------------------------------------------------
 2931: @table @i
 2933: @item format and range of floating point numbers:
 2934: System-dependent; the @code{double} type of C.
 2936: @item results of @code{REPRESENT} when @var{float} is out of range:
 2937: System dependent; @code{REPRESENT} is implemented using the C library
 2938: function @code{ecvt()} and inherits its behaviour in this respect.
 2940: @item rounding or truncation of floating-point numbers:
 2941: System dependent; the rounding behaviour is inherited from the hosting C
 2942: compiler. IEEE-FP-based (i.e., most) systems by default round to
 2943: nearest, and break ties by rounding to even (i.e., such that the last
 2944: bit of the mantissa is 0).
 2946: @item size of floating-point stack:
 2947: @code{s" FLOATING-STACK" environment? drop .}. Can be changed at startup
 2948: with the command-line option @code{-f}.
 2950: @item width of floating-point stack:
 2951: @code{1 floats}.
 2953: @end table
 2956: @c ---------------------------------------------------------------------
 2957: @node floating-ambcond,  , floating-idef, The optional Floating-Point word set
 2958: @subsection Ambiguous conditions
 2959: @c ---------------------------------------------------------------------
 2961: @table @i
 2963: @item @code{df@@} or @code{df!} used with an address that is not double-float  aligned:
 2964: System-dependent. Typically results in an alignment fault like other
 2965: alignment violations.
 2967: @item @code{f@@} or @code{f!} used with an address that is not float  aligned:
 2968: System-dependent. Typically results in an alignment fault like other
 2969: alignment violations.
 2971: @item Floating-point result out of range:
 2972: System-dependent. Can result in a @code{-55 THROW} (Floating-point
 2973: unidentified fault), or can produce a special value representing, e.g.,
 2974: Infinity.
 2976: @item @code{sf@@} or @code{sf!} used with an address that is not single-float  aligned:
 2977: System-dependent. Typically results in an alignment fault like other
 2978: alignment violations.
 2980: @item BASE is not decimal (@code{REPRESENT}, @code{F.}, @code{FE.}, @code{FS.}):
 2981: The floating-point number is converted into decimal nonetheless.
 2983: @item Both arguments are equal to zero (@code{FATAN2}):
 2984: System-dependent. @code{FATAN2} is implemented using the C library
 2985: function @code{atan2()}.
 2987: @item Using ftan on an argument @var{r1} where cos(@var{r1}) is zero:
 2988: System-dependent. Anyway, typically the cos of @var{r1} will not be zero
 2989: because of small errors and the tan will be a very large (or very small)
 2990: but finite number.
 2992: @item @var{d} cannot be presented precisely as a float in @code{D>F}:
 2993: The result is rounded to the nearest float.
 2995: @item dividing by zero:
 2996: @code{-55 throw} (Floating-point unidentified fault)
 2998: @item exponent too big for conversion (@code{DF!}, @code{DF@@}, @code{SF!}, @code{SF@@}):
 2999: System dependent. On IEEE-FP based systems the number is converted into
 3000: an infinity.
 3002: @item @var{float}<1 (@code{facosh}):
 3003: @code{-55 throw} (Floating-point unidentified fault)
 3005: @item @var{float}=<-1 (@code{flnp1}):
 3006: @code{-55 throw} (Floating-point unidentified fault). On IEEE-FP systems
 3007: negative infinity is typically produced for @var{float}=-1.
 3009: @item @var{float}=<0 (@code{fln}, @code{flog}):
 3010: @code{-55 throw} (Floating-point unidentified fault). On IEEE-FP systems
 3011: negative infinity is typically produced for @var{float}=0.
 3013: @item @var{float}<0 (@code{fasinh}, @code{fsqrt}):
 3014: @code{-55 throw} (Floating-point unidentified fault). @code{fasinh}
 3015: produces values for these inputs on my Linux box (Bug in the C library?)
 3017: @item |@var{float}|>1 (@code{facos}, @code{fasin}, @code{fatanh}):
 3018: @code{-55 throw} (Floating-point unidentified fault).
 3020: @item integer part of float cannot be represented by @var{d} in @code{f>d}:
 3021: @code{-55 throw} (Floating-point unidentified fault).
 3023: @item string larger than pictured numeric output area (@code{f.}, @code{fe.}, @code{fs.}):
 3024: This does not happen.
 3025: @end table
 3029: @c =====================================================================
 3030: @node  The optional Locals word set, The optional Memory-Allocation word set, The optional Floating-Point word set, ANS conformance
 3031: @section The optional Locals word set
 3032: @c =====================================================================
 3034: @menu
 3035: * locals-idef::                 Implementation Defined Options                 
 3036: * locals-ambcond::              Ambiguous Conditions              
 3037: @end menu
 3040: @c ---------------------------------------------------------------------
 3041: @node locals-idef, locals-ambcond, The optional Locals word set, The optional Locals word set
 3042: @subsection Implementation Defined Options
 3043: @c ---------------------------------------------------------------------
 3045: @table @i
 3047: @item maximum number of locals in a definition:
 3048: @code{s" #locals" environment? drop .}. Currently 15. This is a lower
 3049: bound, e.g., on a 32-bit machine there can be 41 locals of up to 8
 3050: characters. The number of locals in a definition is bounded by the size
 3051: of locals-buffer, which contains the names of the locals.
 3053: @end table
 3056: @c ---------------------------------------------------------------------
 3057: @node locals-ambcond,  , locals-idef, The optional Locals word set
 3058: @subsection Ambiguous conditions
 3059: @c ---------------------------------------------------------------------
 3061: @table @i
 3063: @item executing a named local in interpretation state:
 3064: @code{-14 throw} (Interpreting a compile-only word).
 3066: @item @var{name} not defined by @code{VALUE} or @code{(LOCAL)} (@code{TO}):
 3067: @code{-32 throw} (Invalid name argument)
 3069: @end table
 3072: @c =====================================================================
 3073: @node  The optional Memory-Allocation word set, The optional Programming-Tools word set, The optional Locals word set, ANS conformance
 3074: @section The optional Memory-Allocation word set
 3075: @c =====================================================================
 3077: @menu
 3078: * memory-idef::                 Implementation Defined Options                 
 3079: @end menu
 3082: @c ---------------------------------------------------------------------
 3083: @node memory-idef,  , The optional Memory-Allocation word set, The optional Memory-Allocation word set
 3084: @subsection Implementation Defined Options
 3085: @c ---------------------------------------------------------------------
 3087: @table @i
 3089: @item values and meaning of @var{ior}:
 3090: The @var{ior}s returned by the file and memory allocation words are
 3091: intended as throw codes. They typically are in the range
 3092: -512@minus{}-2047 of OS errors.  The mapping from OS error numbers to
 3093: @var{ior}s is -512@minus{}@var{errno}.
 3095: @end table
 3097: @c =====================================================================
 3098: @node  The optional Programming-Tools word set, The optional Search-Order word set, The optional Memory-Allocation word set, ANS conformance
 3099: @section The optional Programming-Tools word set
 3100: @c =====================================================================
 3102: @menu
 3103: * programming-idef::            Implementation Defined Options            
 3104: * programming-ambcond::         Ambiguous Conditions         
 3105: @end menu
 3108: @c ---------------------------------------------------------------------
 3109: @node programming-idef, programming-ambcond, The optional Programming-Tools word set, The optional Programming-Tools word set
 3110: @subsection Implementation Defined Options
 3111: @c ---------------------------------------------------------------------
 3113: @table @i
 3115: @item ending sequence for input following @code{;code} and @code{code}:
 3116: Not implemented (yet).
 3118: @item manner of processing input following @code{;code} and @code{code}:
 3119: Not implemented (yet).
 3121: @item search order capability for @code{EDITOR} and @code{ASSEMBLER}:
 3122: Not implemented (yet). If they were implemented, they would use the
 3123: search order wordset.
 3125: @item source and format of display by @code{SEE}:
 3126: The source for @code{see} is the intermediate code used by the inner
 3127: interpreter.  The current @code{see} tries to output Forth source code
 3128: as well as possible.
 3130: @end table
 3132: @c ---------------------------------------------------------------------
 3133: @node programming-ambcond,  , programming-idef, The optional Programming-Tools word set
 3134: @subsection Ambiguous conditions
 3135: @c ---------------------------------------------------------------------
 3137: @table @i
 3139: @item deleting the compilation wordlist (@code{FORGET}):
 3140: Not implemented (yet).
 3142: @item fewer than @var{u}+1 items on the control flow stack (@code{CS-PICK}, @code{CS-ROLL}):
 3143: This typically results in an @code{abort"} with a descriptive error
 3144: message (may change into a @code{-22 throw} (Control structure mismatch)
 3145: in the future). You may also get a memory access error. If you are
 3146: unlucky, this ambiguous condition is not caught.
 3148: @item @var{name} can't be found (@code{forget}):
 3149: Not implemented (yet).
 3151: @item @var{name} not defined via @code{CREATE}:
 3152: @code{;code} is not implemented (yet). If it were, it would behave like
 3153: @code{DOES>} in this respect, i.e., change the execution semantics of
 3154: the last defined word no matter how it was defined.
 3156: @item @code{POSTPONE} applied to @code{[IF]}:
 3157: After defining @code{: X POSTPONE [IF] ; IMMEDIATE}. @code{X} is
 3158: equivalent to @code{[IF]}.
 3160: @item reaching the end of the input source before matching @code{[ELSE]} or @code{[THEN]}:
 3161: Continue in the same state of conditional compilation in the next outer
 3162: input source. Currently there is no warning to the user about this.
 3164: @item removing a needed definition (@code{FORGET}):
 3165: Not implemented (yet).
 3167: @end table
 3170: @c =====================================================================
 3171: @node  The optional Search-Order word set,  , The optional Programming-Tools word set, ANS conformance
 3172: @section The optional Search-Order word set
 3173: @c =====================================================================
 3175: @menu
 3176: * search-idef::                 Implementation Defined Options                 
 3177: * search-ambcond::              Ambiguous Conditions              
 3178: @end menu
 3181: @c ---------------------------------------------------------------------
 3182: @node search-idef, search-ambcond, The optional Search-Order word set, The optional Search-Order word set
 3183: @subsection Implementation Defined Options
 3184: @c ---------------------------------------------------------------------
 3186: @table @i
 3188: @item maximum number of word lists in search order:
 3189: @code{s" wordlists" environment? drop .}. Currently 16.
 3191: @item minimum search order:
 3192: @code{root root}.
 3194: @end table
 3196: @c ---------------------------------------------------------------------
 3197: @node search-ambcond,  , search-idef, The optional Search-Order word set
 3198: @subsection Ambiguous conditions
 3199: @c ---------------------------------------------------------------------
 3201: @table @i
 3203: @item changing the compilation wordlist (during compilation):
 3204: The definition is put into the wordlist that is the compilation wordlist
 3205: when @code{REVEAL} is executed (by @code{;}, @code{DOES>},
 3206: @code{RECURSIVE}, etc.).
 3208: @item search order empty (@code{previous}):
 3209: @code{abort" Vocstack empty"}.
 3211: @item too many word lists in search order (@code{also}):
 3212: @code{abort" Vocstack full"}.
 3214: @end table
 3217: @node Model, Emacs and Gforth, ANS conformance, Top
 3218: @chapter Model
 3220: @node Emacs and Gforth, Internals, Model, Top
 3221: @chapter Emacs and Gforth
 3223: Gforth comes with @file{gforth.el}, an improved version of
 3224: @file{forth.el} by Goran Rydqvist (icluded in the TILE package). The
 3225: improvements are a better (but still not perfect) handling of
 3226: indentation. I have also added comment paragraph filling (@kbd{M-q}),
 3227: commenting (@kbd{C-x \}) and uncommenting (@kbd{C-u C-x \}) regions and
 3228: removing debugging tracers (@kbd{C-x ~}, @pxref{Debugging}). I left the
 3229: stuff I do not use alone, even though some of it only makes sense for
 3230: TILE. To get a description of these features, enter Forth mode and type
 3231: @kbd{C-h m}.
 3233: In addition, Gforth supports Emacs quite well: The source code locations
 3234: given in error messages, debugging output (from @code{~~}) and failed
 3235: assertion messages are in the right format for Emacs' compilation mode
 3236: (@pxref{Compilation, , Running Compilations under Emacs, emacs, Emacs
 3237: Manual}) so the source location corresponding to an error or other
 3238: message is only a few keystrokes away (@kbd{C-x `} for the next error,
 3239: @kbd{C-c C-c} for the error under the cursor).
 3241: Also, if you @code{include} @file{etags.fs}, a new @file{TAGS} file
 3242: (@pxref{Tags, , Tags Tables, emacs, Emacs Manual}) will be produced that
 3243: contains the definitions of all words defined afterwards. You can then
 3244: find the source for a word using @kbd{M-.}. Note that emacs can use
 3245: several tags files at the same time (e.g., one for the Gforth sources
 3246: and one for your program, @pxref{Select Tags Table,,Selecting a Tags
 3247: Table,emacs, Emacs Manual}). The TAGS file for the preloaded words is
 3248: @file{$(datadir)/gforth/$(VERSION)/TAGS} (e.g.,
 3249: @file{/usr/local/share/gforth/0.2/TAGS}).
 3251: To get all these benefits, add the following lines to your @file{.emacs}
 3252: file:
 3254: @example
 3255: (autoload 'forth-mode "gforth.el")
 3256: (setq auto-mode-alist (cons '("\\.fs\\'" . forth-mode) auto-mode-alist))
 3257: @end example
 3259: @node Internals, Bugs, Emacs and Gforth, Top
 3260: @chapter Internals
 3262: Reading this section is not necessary for programming with Gforth. It
 3263: should be helpful for finding your way in the Gforth sources.
 3265: The ideas in this section have also been published in the papers
 3266: @cite{ANS fig/GNU/??? Forth} (in German) by Bernd Paysan, presented at
 3267: the Forth-Tagung '93 and @cite{A Portable Forth Engine} by M. Anton
 3268: Ertl, presented at EuroForth '93; the latter is available at
 3269: @*@file{}.
 3271: @menu
 3272: * Portability::                 
 3273: * Threading::                   
 3274: * Primitives::                  
 3275: * System Architecture::         
 3276: * Performance::                 
 3277: @end menu
 3279: @node Portability, Threading, Internals, Internals
 3280: @section Portability
 3282: One of the main goals of the effort is availability across a wide range
 3283: of personal machines. fig-Forth, and, to a lesser extent, F83, achieved
 3284: this goal by manually coding the engine in assembly language for several
 3285: then-popular processors. This approach is very labor-intensive and the
 3286: results are short-lived due to progress in computer architecture.
 3288: Others have avoided this problem by coding in C, e.g., Mitch Bradley
 3289: (cforth), Mikael Patel (TILE) and Dirk Zoller (pfe). This approach is
 3290: particularly popular for UNIX-based Forths due to the large variety of
 3291: architectures of UNIX machines. Unfortunately an implementation in C
 3292: does not mix well with the goals of efficiency and with using
 3293: traditional techniques: Indirect or direct threading cannot be expressed
 3294: in C, and switch threading, the fastest technique available in C, is
 3295: significantly slower. Another problem with C is that it's very
 3296: cumbersome to express double integer arithmetic.
 3298: Fortunately, there is a portable language that does not have these
 3299: limitations: GNU C, the version of C processed by the GNU C compiler
 3300: (@pxref{C Extensions, , Extensions to the C Language Family,,
 3301: GNU C Manual}). Its labels as values feature (@pxref{Labels as Values, ,
 3302: Labels as Values,, GNU C Manual}) makes direct and indirect
 3303: threading possible, its @code{long long} type (@pxref{Long Long, ,
 3304: Double-Word Integers,, GNU C Manual}) corresponds to Forths
 3305: double numbers. GNU C is available for free on all important (and many
 3306: unimportant) UNIX machines, VMS, 80386s running MS-DOS, the Amiga, and
 3307: the Atari ST, so a Forth written in GNU C can run on all these
 3308: machines.
 3310: Writing in a portable language has the reputation of producing code that
 3311: is slower than assembly. For our Forth engine we repeatedly looked at
 3312: the code produced by the compiler and eliminated most compiler-induced
 3313: inefficiencies by appropriate changes in the source-code.
 3315: However, register allocation cannot be portably influenced by the
 3316: programmer, leading to some inefficiencies on register-starved
 3317: machines. We use explicit register declarations (@pxref{Explicit Reg
 3318: Vars, , Variables in Specified Registers,, GNU C Manual}) to
 3319: improve the speed on some machines. They are turned on by using the
 3320: @code{gcc} switch @code{-DFORCE_REG}. Unfortunately, this feature not
 3321: only depends on the machine, but also on the compiler version: On some
 3322: machines some compiler versions produce incorrect code when certain
 3323: explicit register declarations are used. So by default
 3324: @code{-DFORCE_REG} is not used.
 3326: @node Threading, Primitives, Portability, Internals
 3327: @section Threading
 3329: GNU C's labels as values extension (available since @code{gcc-2.0},
 3330: @pxref{Labels as Values, , Labels as Values,, GNU C Manual})
 3331: makes it possible to take the address of @var{label} by writing
 3332: @code{&&@var{label}}.  This address can then be used in a statement like
 3333: @code{goto *@var{address}}. I.e., @code{goto *&&x} is the same as
 3334: @code{goto x}.
 3336: With this feature an indirect threaded NEXT looks like:
 3337: @example
 3338: cfa = *ip++;
 3339: ca = *cfa;
 3340: goto *ca;
 3341: @end example
 3342: For those unfamiliar with the names: @code{ip} is the Forth instruction
 3343: pointer; the @code{cfa} (code-field address) corresponds to ANS Forths
 3344: execution token and points to the code field of the next word to be
 3345: executed; The @code{ca} (code address) fetched from there points to some
 3346: executable code, e.g., a primitive or the colon definition handler
 3347: @code{docol}.
 3349: Direct threading is even simpler:
 3350: @example
 3351: ca = *ip++;
 3352: goto *ca;
 3353: @end example
 3355: Of course we have packaged the whole thing neatly in macros called
 3356: @code{NEXT} and @code{NEXT1} (the part of NEXT after fetching the cfa).
 3358: @menu
 3359: * Scheduling::                  
 3360: * Direct or Indirect Threaded?::  
 3361: * DOES>::                       
 3362: @end menu
 3364: @node Scheduling, Direct or Indirect Threaded?, Threading, Threading
 3365: @subsection Scheduling
 3367: There is a little complication: Pipelined and superscalar processors,
 3368: i.e., RISC and some modern CISC machines can process independent
 3369: instructions while waiting for the results of an instruction. The
 3370: compiler usually reorders (schedules) the instructions in a way that
 3371: achieves good usage of these delay slots. However, on our first tries
 3372: the compiler did not do well on scheduling primitives. E.g., for
 3373: @code{+} implemented as
 3374: @example
 3375: n=sp[0]+sp[1];
 3376: sp++;
 3377: sp[0]=n;
 3378: NEXT;
 3379: @end example
 3380: the NEXT comes strictly after the other code, i.e., there is nearly no
 3381: scheduling. After a little thought the problem becomes clear: The
 3382: compiler cannot know that sp and ip point to different addresses (and
 3383: the version of @code{gcc} we used would not know it even if it was
 3384: possible), so it could not move the load of the cfa above the store to
 3385: the TOS. Indeed the pointers could be the same, if code on or very near
 3386: the top of stack were executed. In the interest of speed we chose to
 3387: forbid this probably unused ``feature'' and helped the compiler in
 3388: scheduling: NEXT is divided into the loading part (@code{NEXT_P1}) and
 3389: the goto part (@code{NEXT_P2}). @code{+} now looks like:
 3390: @example
 3391: n=sp[0]+sp[1];
 3392: sp++;
 3393: NEXT_P1;
 3394: sp[0]=n;
 3395: NEXT_P2;
 3396: @end example
 3397: This can be scheduled optimally by the compiler.
 3399: This division can be turned off with the switch @code{-DCISC_NEXT}. This
 3400: switch is on by default on machines that do not profit from scheduling
 3401: (e.g., the 80386), in order to preserve registers.
 3403: @node Direct or Indirect Threaded?, DOES>, Scheduling, Threading
 3404: @subsection Direct or Indirect Threaded?
 3406: Both! After packaging the nasty details in macro definitions we
 3407: realized that we could switch between direct and indirect threading by
 3408: simply setting a compilation flag (@code{-DDIRECT_THREADED}) and
 3409: defining a few machine-specific macros for the direct-threading case.
 3410: On the Forth level we also offer access words that hide the
 3411: differences between the threading methods (@pxref{Threading Words}).
 3413: Indirect threading is implemented completely
 3414: machine-independently. Direct threading needs routines for creating
 3415: jumps to the executable code (e.g. to docol or dodoes). These routines
 3416: are inherently machine-dependent, but they do not amount to many source
 3417: lines. I.e., even porting direct threading to a new machine is a small
 3418: effort.
 3420: @node DOES>,  , Direct or Indirect Threaded?, Threading
 3421: @subsection DOES>
 3422: One of the most complex parts of a Forth engine is @code{dodoes}, i.e.,
 3423: the chunk of code executed by every word defined by a
 3424: @code{CREATE}...@code{DOES>} pair. The main problem here is: How to find
 3425: the Forth code to be executed, i.e. the code after the @code{DOES>} (the
 3426: DOES-code)? There are two solutions:
 3428: In fig-Forth the code field points directly to the dodoes and the
 3429: DOES-code address is stored in the cell after the code address
 3430: (i.e. at cfa cell+). It may seem that this solution is illegal in the
 3431: Forth-79 and all later standards, because in fig-Forth this address
 3432: lies in the body (which is illegal in these standards). However, by
 3433: making the code field larger for all words this solution becomes legal
 3434: again. We use this approach for the indirect threaded version. Leaving
 3435: a cell unused in most words is a bit wasteful, but on the machines we
 3436: are targetting this is hardly a problem. The other reason for having a
 3437: code field size of two cells is to avoid having different image files
 3438: for direct and indirect threaded systems (@pxref{System Architecture}).
 3440: The other approach is that the code field points or jumps to the cell
 3441: after @code{DOES}. In this variant there is a jump to @code{dodoes} at
 3442: this address. @code{dodoes} can then get the DOES-code address by
 3443: computing the code address, i.e., the address of the jump to dodoes,
 3444: and add the length of that jump field. A variant of this is to have a
 3445: call to @code{dodoes} after the @code{DOES>}; then the return address
 3446: (which can be found in the return register on RISCs) is the DOES-code
 3447: address. Since the two cells available in the code field are usually
 3448: used up by the jump to the code address in direct threading, we use
 3449: this approach for direct threading. We did not want to add another
 3450: cell to the code field.
 3452: @node Primitives, System Architecture, Threading, Internals
 3453: @section Primitives
 3455: @menu
 3456: * Automatic Generation::        
 3457: * TOS Optimization::            
 3458: * Produced code::               
 3459: @end menu
 3461: @node Automatic Generation, TOS Optimization, Primitives, Primitives
 3462: @subsection Automatic Generation
 3464: Since the primitives are implemented in a portable language, there is no
 3465: longer any need to minimize the number of primitives. On the contrary,
 3466: having many primitives is an advantage: speed. In order to reduce the
 3467: number of errors in primitives and to make programming them easier, we
 3468: provide a tool, the primitive generator (@file{prims2x.fs}), that
 3469: automatically generates most (and sometimes all) of the C code for a
 3470: primitive from the stack effect notation.  The source for a primitive
 3471: has the following form:
 3473: @format
 3474: @var{Forth-name}	@var{stack-effect}	@var{category}	[@var{pronounc.}]
 3475: [@code{""}@var{glossary entry}@code{""}]
 3476: @var{C code}
 3477: [@code{:}
 3478: @var{Forth code}]
 3479: @end format
 3481: The items in brackets are optional. The category and glossary fields
 3482: are there for generating the documentation, the Forth code is there
 3483: for manual implementations on machines without GNU C. E.g., the source
 3484: for the primitive @code{+} is:
 3485: @example
 3486: +    n1 n2 -- n    core    plus
 3487: n = n1+n2;
 3488: @end example
 3490: This looks like a specification, but in fact @code{n = n1+n2} is C
 3491: code. Our primitive generation tool extracts a lot of information from
 3492: the stack effect notations@footnote{We use a one-stack notation, even
 3493: though we have separate data and floating-point stacks; The separate
 3494: notation can be generated easily from the unified notation.}: The number
 3495: of items popped from and pushed on the stack, their type, and by what
 3496: name they are referred to in the C code. It then generates a C code
 3497: prelude and postlude for each primitive. The final C code for @code{+}
 3498: looks like this:
 3500: @example
 3501: I_plus:	/* + ( n1 n2 -- n ) */  /* label, stack effect */
 3502: /*  */                          /* documentation */
 3503: @{
 3504: DEF_CA                          /* definition of variable ca (indirect threading) */
 3505: Cell n1;                        /* definitions of variables */
 3506: Cell n2;
 3507: Cell n;
 3508: n1 = (Cell) sp[1];              /* input */
 3509: n2 = (Cell) TOS;
 3510: sp += 1;                        /* stack adjustment */
 3511: NAME("+")                       /* debugging output (with -DDEBUG) */
 3512: @{
 3513: n = n1+n2;                      /* C code taken from the source */
 3514: @}
 3515: NEXT_P1;                        /* NEXT part 1 */
 3516: TOS = (Cell)n;                  /* output */
 3517: NEXT_P2;                        /* NEXT part 2 */
 3518: @}
 3519: @end example
 3521: This looks long and inefficient, but the GNU C compiler optimizes quite
 3522: well and produces optimal code for @code{+} on, e.g., the R3000 and the
 3523: HP RISC machines: Defining the @code{n}s does not produce any code, and
 3524: using them as intermediate storage also adds no cost.
 3526: There are also other optimizations, that are not illustrated by this
 3527: example: Assignments between simple variables are usually for free (copy
 3528: propagation). If one of the stack items is not used by the primitive
 3529: (e.g.  in @code{drop}), the compiler eliminates the load from the stack
 3530: (dead code elimination). On the other hand, there are some things that
 3531: the compiler does not do, therefore they are performed by
 3532: @file{prims2x.fs}: The compiler does not optimize code away that stores
 3533: a stack item to the place where it just came from (e.g., @code{over}).
 3535: While programming a primitive is usually easy, there are a few cases
 3536: where the programmer has to take the actions of the generator into
 3537: account, most notably @code{?dup}, but also words that do not (always)
 3538: fall through to NEXT.
 3540: @node TOS Optimization, Produced code, Automatic Generation, Primitives
 3541: @subsection TOS Optimization
 3543: An important optimization for stack machine emulators, e.g., Forth
 3544: engines, is keeping  one or more of the top stack items in
 3545: registers.  If a word has the stack effect @var{in1}...@var{inx} @code{--}
 3546: @var{out1}...@var{outy}, keeping the top @var{n} items in registers
 3547: @itemize
 3548: @item
 3549: is better than keeping @var{n-1} items, if @var{x>=n} and @var{y>=n},
 3550: due to fewer loads from and stores to the stack.
 3551: @item is slower than keeping @var{n-1} items, if @var{x<>y} and @var{x<n} and
 3552: @var{y<n}, due to additional moves between registers.
 3553: @end itemize
 3555: In particular, keeping one item in a register is never a disadvantage,
 3556: if there are enough registers. Keeping two items in registers is a
 3557: disadvantage for frequent words like @code{?branch}, constants,
 3558: variables, literals and @code{i}. Therefore our generator only produces
 3559: code that keeps zero or one items in registers. The generated C code
 3560: covers both cases; the selection between these alternatives is made at
 3561: C-compile time using the switch @code{-DUSE_TOS}. @code{TOS} in the C
 3562: code for @code{+} is just a simple variable name in the one-item case,
 3563: otherwise it is a macro that expands into @code{sp[0]}. Note that the
 3564: GNU C compiler tries to keep simple variables like @code{TOS} in
 3565: registers, and it usually succeeds, if there are enough registers.
 3567: The primitive generator performs the TOS optimization for the
 3568: floating-point stack, too (@code{-DUSE_FTOS}). For floating-point
 3569: operations the benefit of this optimization is even larger:
 3570: floating-point operations take quite long on most processors, but can be
 3571: performed in parallel with other operations as long as their results are
 3572: not used. If the FP-TOS is kept in a register, this works. If
 3573: it is kept on the stack, i.e., in memory, the store into memory has to
 3574: wait for the result of the floating-point operation, lengthening the
 3575: execution time of the primitive considerably.
 3577: The TOS optimization makes the automatic generation of primitives a
 3578: bit more complicated. Just replacing all occurrences of @code{sp[0]} by
 3579: @code{TOS} is not sufficient. There are some special cases to
 3580: consider:
 3581: @itemize
 3582: @item In the case of @code{dup ( w -- w w )} the generator must not
 3583: eliminate the store to the original location of the item on the stack,
 3584: if the TOS optimization is turned on.
 3585: @item Primitives with stack effects of the form @code{--}
 3586: @var{out1}...@var{outy} must store the TOS to the stack at the start.
 3587: Likewise, primitives with the stack effect @var{in1}...@var{inx} @code{--}
 3588: must load the TOS from the stack at the end. But for the null stack
 3589: effect @code{--} no stores or loads should be generated.
 3590: @end itemize
 3592: @node Produced code,  , TOS Optimization, Primitives
 3593: @subsection Produced code
 3595: To see what assembly code is produced for the primitives on your machine
 3596: with your compiler and your flag settings, type @code{make engine.s} and
 3597: look at the resulting file @file{engine.s}.
 3599: @node System Architecture, Performance, Primitives, Internals
 3600: @section System Architecture
 3602: Our Forth system consists not only of primitives, but also of
 3603: definitions written in Forth. Since the Forth compiler itself belongs
 3604: to those definitions, it is not possible to start the system with the
 3605: primitives and the Forth source alone. Therefore we provide the Forth
 3606: code as an image file in nearly executable form. At the start of the
 3607: system a C routine loads the image file into memory, sets up the
 3608: memory (stacks etc.) according to information in the image file, and
 3609: starts executing Forth code.
 3611: The image file format is a compromise between the goals of making it
 3612: easy to generate image files and making them portable. The easiest way
 3613: to generate an image file is to just generate a memory dump. However,
 3614: this kind of image file cannot be used on a different machine, or on
 3615: the next version of the engine on the same machine, it even might not
 3616: work with the same engine compiled by a different version of the C
 3617: compiler. We would like to have as few versions of the image file as
 3618: possible, because we do not want to distribute many versions of the
 3619: same image file, and to make it easy for the users to use their image
 3620: files on many machines. We currently need to create a different image
 3621: file for machines with different cell sizes and different byte order
 3622: (little- or big-endian)@footnote{We are considering adding information to the
 3623: image file that enables the loader to change the byte order.}.
 3625: Forth code that is going to end up in a portable image file has to
 3626: comply to some restrictions: addresses have to be stored in memory with
 3627: special words (@code{A!}, @code{A,}, etc.) in order to make the code
 3628: relocatable. Cells, floats, etc., have to be stored at the natural
 3629: alignment boundaries@footnote{E.g., store floats (8 bytes) at an address
 3630: dividable by~8. This happens automatically in our system when you use
 3631: the ANS Forth alignment words.}, in order to avoid alignment faults on
 3632: machines with stricter alignment. The image file is produced by a
 3633: metacompiler (@file{cross.fs}).
 3635: So, unlike the image file of Mitch Bradleys @code{cforth}, our image
 3636: file is not directly executable, but has to undergo some manipulations
 3637: during loading. Address relocation is performed at image load-time, not
 3638: at run-time. The loader also has to replace tokens standing for
 3639: primitive calls with the appropriate code-field addresses (or code
 3640: addresses in the case of direct threading).
 3642: @node  Performance,  , System Architecture, Internals
 3643: @section Performance
 3645: On RISCs the Gforth engine is very close to optimal; i.e., it is usually
 3646: impossible to write a significantly faster engine.
 3648: On register-starved machines like the 386 architecture processors
 3649: improvements are possible, because @code{gcc} does not utilize the
 3650: registers as well as a human, even with explicit register declarations;
 3651: e.g., Bernd Beuster wrote a Forth system fragment in assembly language
 3652: and hand-tuned it for the 486; this system is 1.19 times faster on the
 3653: Sieve benchmark on a 486DX2/66 than Gforth compiled with
 3654: @code{gcc-2.6.3} with @code{-DFORCE_REG}.
 3656: However, this potential advantage of assembly language implementations
 3657: is not necessarily realized in complete Forth systems: We compared
 3658: Gforth (direct threaded, compiled with @code{gcc-2.6.3} and
 3659: @code{-DFORCE_REG}) with Win32Forth 1.2093, LMI's NT Forth (Beta, May
 3660: 1994) and Eforth (with and without peephole (aka pinhole) optimization
 3661: of the threaded code); all these systems were written in assembly
 3662: language. We also compared Gforth with two systems written in C:
 3663: PFE-0.9.11 (compiled with @code{gcc-2.6.3} with the default
 3664: configuration for Linux: @code{-O2 -fomit-frame-pointer -DUSE_REGS}) and
 3665: ThisForth Beta (compiled with gcc-2.6.3 -O3 -fomit-frame-pointer;
 3666: ThisForth employs peephole optimization of the threaded code). We
 3667: benchmarked Gforth, PFE and ThisForth on a 486DX2/66 under
 3668: Linux. Kenneth O'Heskin kindly provided the results for Win32Forth and
 3669: NT Forth on a 486DX2/66 with similar memory performance under Windows
 3670: NT. Marcel Hendrix ported Eforth to Linux, then extended it to run the
 3671: benchmarks, added the peephole optimizer, ran the benchmarks and
 3672: reported the results.
 3674: We used four small benchmarks: the ubiquitous Sieve; bubble-sorting and
 3675: matrix multiplication come from the Stanford integer benchmarks and have
 3676: been translated into Forth by Martin Fraeman; we used the versions
 3677: included in the TILE Forth package; and a recursive Fibonacci number
 3678: computation for benchmarking calling performance. The following table shows
 3679: the time taken for the benchmarks scaled by the time taken by Gforth (in
 3680: other words, it shows the speedup factor that Gforth achieved over the
 3681: other systems).
 3683: @example
 3684: relative        Win32-    NT       eforth       This-
 3685: time      Gforth Forth Forth eforth  +opt   PFE Forth
 3686: sieve       1.00  1.39  1.14   1.39  0.85  1.78  3.18
 3687: bubble      1.00  1.33  1.43   1.51  0.89  1.70
 3688: matmul      1.00  1.43  1.31   1.42  1.12  2.28
 3689: fib         1.00  1.55  1.36   1.24  1.15  1.97  3.04
 3690: @end example
 3692: You may find the good performance of Gforth compared with the systems
 3693: written in assembly language quite surprising. One important reason for
 3694: the disappointing performance of these systems is probably that they are
 3695: not written optimally for the 486 (e.g., they use the @code{lods}
 3696: instruction). In addition, Win32Forth uses a comfortable, but costly
 3697: method for relocating the Forth image: like @code{cforth}, it computes
 3698: the actual addresses at run time, resulting in two address computations
 3699: per NEXT (@pxref{System Architecture}).
 3701: Only Eforth with the peephole optimizer performs comparable to
 3702: Gforth. The speedups achieved with peephole optimization of threaded
 3703: code are quite remarkable. Adding a peephole optimizer to Gforth should
 3704: cause similar speedups.
 3706: The speedup of Gforth over PFE and ThisForth can be easily explained
 3707: with the self-imposed restriction to standard C (although the measured
 3708: implementation of PFE uses a GNU C extension: global register
 3709: variables), which makes efficient threading impossible.  Moreover,
 3710: current C compilers have a hard time optimizing other aspects of the
 3711: ThisForth source.
 3713: Note that the performance of Gforth on 386 architecture processors
 3714: varies widely with the version of @code{gcc} used. E.g., @code{gcc-2.5.8}
 3715: failed to allocate any of the virtual machine registers into real
 3716: machine registers by itself and would not work correctly with explicit
 3717: register declarations, giving a 1.3 times slower engine (on a 486DX2/66
 3718: running the Sieve) than the one measured above.
 3720: In @cite{Translating Forth to Efficient C} by M. Anton Ertl and Martin
 3721: Maierhofer (presented at EuroForth '95), an indirect threaded version of
 3722: Gforth is compared with Win32Forth, NT Forth, PFE, and ThisForth; that
 3723: version of Gforth is 2\%@minus{}8\% slower on a 486 than the version
 3724: used here. The paper available at
 3725: @*@file{};
 3726: it also contains numbers for some native code systems. You can find
 3727: numbers for Gforth on various machines in @file{Benchres}.
 3729: @node Bugs, Pedigree, Internals, Top
 3730: @chapter Bugs
 3732: Known bugs are described in the file BUGS in the Gforth distribution.
 3734: If you find a bug, please send a bug report to
 3735: @code{}. A bug report should
 3736: describe the Gforth version used (it is announced at the start of an
 3737: interactive Gforth session), the machine and operating system (on Unix
 3738: systems you can use @code{uname -a} to produce this information), the
 3739: installation options (send the @code{config.status} file), and a
 3740: complete list of changes you (or your installer) have made to the Gforth
 3741: sources (if any); it should contain a program (or a sequence of keyboard
 3742: commands) that reproduces the bug and a description of what you think
 3743: constitutes the buggy behaviour.
 3745: For a thorough guide on reporting bugs read @ref{Bug Reporting, , How
 3746: to Report Bugs,, GNU C Manual}.
 3749: @node Pedigree, Word Index, Bugs, Top
 3750: @chapter Pedigree
 3752: Gforth descends from BigForth (1993) and fig-Forth. Gforth and PFE (by
 3753: Dirk Zoller) will cross-fertilize each other. Of course, a significant
 3754: part of the design of Gforth was prescribed by ANS Forth.
 3756: Bernd Paysan wrote BigForth, a descendent from TurboForth, an unreleased
 3757: 32 bit native code version of VolksForth for the Atari ST, written
 3758: mostly by Dietrich Weineck.
 3760: VolksForth descends from F83. It was written by Klaus Schleisiek, Bernd
 3761: Pennemann, Georg Rehfeld and Dietrich Weineck for the C64 (called
 3762: UltraForth there) in the mid-80s and ported to the Atari ST in 1986.
 3764: Hennry Laxen and Mike Perry wrote F83 as a model implementation of the
 3765: Forth-83 standard. !! Pedigree? When?
 3767: A team led by Bill Ragsdale implemented fig-Forth on many processors in
 3768: 1979. Robert Selzer and Bill Ragsdale developed the original
 3769: implementation of fig-Forth for the 6502 based on microForth.
 3771: The principal architect of microForth was Dean Sanderson. microForth was
 3772: FORTH, Inc.'s first off-the-shelf product. It was developped in 1976 for
 3773: the 1802, and subsequently implemented on the 8080, the 6800 and the
 3774: Z80.
 3776: All earlier Forth systems were custom-made, usually by Charles Moore,
 3777: who discovered (as he puts it) Forth in the late 60s.
 3779: A part of the information in this section comes from @cite{The Evolution
 3780: of Forth} by Elizabeth D. Rather, Donald R. Colburn and Charles
 3781: H. Moore, presented at the HOPL-II conference and preprinted in SIGPLAN
 3782: Notices 28(3), 1993.  You can find more historical and genealogical
 3783: information about Forth there.
 3785: @node Word Index, Node Index, Pedigree, Top
 3786: @chapter Word Index
 3788: This index is as incomplete as the manual. Each word is listed with
 3789: stack effect and wordset.
 3791: @printindex fn
 3793: @node Node Index,  , Word Index, Top
 3794: @chapter Node Index
 3796: This index is even less complete than the manual.
 3798: @contents
 3799: @bye

FreeBSD-CVSweb <>