[gforth] / gforth / missing  

gforth: gforth/missing

Diff for /gforth/missing between version 1.1 and 1.2

version 1.1, Wed Jul 8 16:47:32 1998 UTC version 1.2, Tue Dec 24 14:47:24 2002 UTC
Line 1 
Line 1 
 #! /bin/sh  #! /bin/sh
 # Common stub for a few missing GNU programs while installing.  # Common stub for a few missing GNU programs while installing.
 # Copyright (C) 1996, 1997 Free Software Foundation, Inc.  # Copyright (C) 1996, 1997, 1999, 2000, 2002 Free Software Foundation, Inc.
 # Franc,ois Pinard <pinard@iro.umontreal.ca>, 1996.  # Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
   
 # This program is free software; you can redistribute it and/or modify  # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by  # it under the terms of the GNU General Public License as published by
Line 18 
Line 18 
 # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
 # 02111-1307, USA.  # 02111-1307, USA.
   
   # As a special exception to the GNU General Public License, if you
   # distribute this file as part of a program that contains a
   # configuration script generated by Autoconf, you may include it under
   # the same distribution terms that you use for the rest of that program.
   
 if test $# -eq 0; then  if test $# -eq 0; then
   echo 1>&2 "Try \`$0 --help' for more information"    echo 1>&2 "Try \`$0 --help' for more information"
   exit 1    exit 1
 fi  fi
   
   run=:
   
   # In the cases where this matters, `missing' is being run in the
   # srcdir already.
   if test -f configure.ac; then
     configure_ac=configure.ac
   else
     configure_ac=configure.in
   fi
   
   case "$1" in
   --run)
     # Try to run requested program, and just exit if it succeeds.
     run=
     shift
     "$@" && exit 0
     ;;
   esac
   
   # If it does not exist, or fails to run (possibly an outdated version),
   # try to emulate it.
 case "$1" in  case "$1" in
   
   -h|--h|--he|--hel|--help)    -h|--h|--he|--hel|--help)
Line 35 
Line 61 
 Options:  Options:
   -h, --help      display this help and exit    -h, --help      display this help and exit
   -v, --version   output version information and exit    -v, --version   output version information and exit
     --run           try to run the given command, and emulate it if it fails
   
 Supported PROGRAM values:  Supported PROGRAM values:
   aclocal      touch file \`aclocal.m4'    aclocal      touch file \`aclocal.m4'
Line 43 
Line 70 
   automake     touch all \`Makefile.in' files    automake     touch all \`Makefile.in' files
   bison        create \`y.tab.[ch]', if possible, from existing .[ch]    bison        create \`y.tab.[ch]', if possible, from existing .[ch]
   flex         create \`lex.yy.c', if possible, from existing .c    flex         create \`lex.yy.c', if possible, from existing .c
     help2man     touch the output file
   lex          create \`lex.yy.c', if possible, from existing .c    lex          create \`lex.yy.c', if possible, from existing .c
   makeinfo     touch the output file    makeinfo     touch the output file
     tar          try tar, gnutar, gtar, then tar without non-portable flags
   yacc         create \`y.tab.[ch]', if possible, from existing .[ch]"    yacc         create \`y.tab.[ch]', if possible, from existing .[ch]"
     ;;      ;;
   
   -v|--v|--ve|--ver|--vers|--versi|--versio|--version)    -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
     echo "missing - GNU libit 0.0"      echo "missing 0.4 - GNU automake"
     ;;      ;;
   
   -*)    -*)
Line 58 
Line 87 
     exit 1      exit 1
     ;;      ;;
   
   aclocal)    aclocal*)
       if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
          # We have it, but it failed.
          exit 1
       fi
   
     echo 1>&2 "\      echo 1>&2 "\
 WARNING: \`$1' is missing on your system.  You should only need it if  WARNING: \`$1' is missing on your system.  You should only need it if
          you modified \`acinclude.m4' or \`configure.in'.  You might want           you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
          to install the \`Automake' and \`Perl' packages.  Grab them from           to install the \`Automake' and \`Perl' packages.  Grab them from
          any GNU archive site."           any GNU archive site."
     touch aclocal.m4      touch aclocal.m4
     ;;      ;;
   
   autoconf)    autoconf)
       if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
          # We have it, but it failed.
          exit 1
       fi
   
     echo 1>&2 "\      echo 1>&2 "\
 WARNING: \`$1' is missing on your system.  You should only need it if  WARNING: \`$1' is missing on your system.  You should only need it if
          you modified \`configure.in'.  You might want to install the           you modified \`${configure_ac}'.  You might want to install the
          \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU           \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
          archive site."           archive site."
     touch configure      touch configure
     ;;      ;;
   
   autoheader)    autoheader)
       if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
          # We have it, but it failed.
          exit 1
       fi
   
     echo 1>&2 "\      echo 1>&2 "\
 WARNING: \`$1' is missing on your system.  You should only need it if  WARNING: \`$1' is missing on your system.  You should only need it if
          you modified \`acconfig.h' or \`configure.in'.  You might want           you modified \`acconfig.h' or \`${configure_ac}'.  You might want
          to install the \`Autoconf' and \`GNU m4' packages.  Grab them           to install the \`Autoconf' and \`GNU m4' packages.  Grab them
          from any GNU archive site."           from any GNU archive site."
     files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER([^):]*:\([^)]*\)).*/\1/p' configure.in`      files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
     if test -z "$files"; then      test -z "$files" && files="config.h"
       files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^):]*\)).*/\1/p' configure.in`      touch_files=
       test -z "$files" || files="$files.in"      for f in $files; do
     else        case "$f" in
       files=`echo "$files" | sed -e 's/:/ /g'`        *:*) touch_files="$touch_files "`echo "$f" |
     fi                                         sed -e 's/^[^:]*://' -e 's/:.*//'`;;
     test -z "$files" && files="config.h.in"        *) touch_files="$touch_files $f.in";;
     touch $files        esac
       done
       touch $touch_files
     ;;      ;;
   
   automake)    automake*)
       if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
          # We have it, but it failed.
          exit 1
       fi
   
     echo 1>&2 "\      echo 1>&2 "\
 WARNING: \`$1' is missing on your system.  You should only need it if  WARNING: \`$1' is missing on your system.  You should only need it if
          you modified \`Makefile.am', \`acinclude.m4' or \`configure.in'.           you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
          You might want to install the \`Automake' and \`Perl' packages.           You might want to install the \`Automake' and \`Perl' packages.
          Grab them from any GNU archive site."           Grab them from any GNU archive site."
     find . -type f -name Makefile.am -print \      find . -type f -name Makefile.am -print |
       | sed 's/^\(.*\).am$/touch \1.in/' \             sed 's/\.am$/.in/' |
       | sh             while read f; do touch "$f"; done
       ;;
   
     autom4te)
       if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
          # We have it, but it failed.
          exit 1
       fi
   
       echo 1>&2 "\
   WARNING: \`$1' is needed, and you do not seem to have it handy on your
            system.  You might have modified some files without having the
            proper tools for further handling them.
            You can get \`$1Help2man' as part of \`Autoconf' from any GNU
            archive site."
   
       file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
       test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
       if test -f "$file"; then
           touch $file
       else
           test -z "$file" || exec >$file
           echo "#! /bin/sh"
           echo "# Created by GNU Automake missing as a replacement of"
           echo "#  $ $@"
           echo "exit 0"
           chmod +x $file
           exit 1
       fi
     ;;      ;;
   
   bison|yacc)    bison|yacc)
Line 157 
Line 236 
     fi      fi
     ;;      ;;
   
     help2man)
       if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
          # We have it, but it failed.
          exit 1
       fi
   
       echo 1>&2 "\
   WARNING: \`$1' is missing on your system.  You should only need it if
            you modified a dependency of a manual page.  You may need the
            \`Help2man' package in order for those modifications to take
            effect.  You can get \`Help2man' from any GNU archive site."
   
       file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
       if test -z "$file"; then
           file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
       fi
       if [ -f "$file" ]; then
           touch $file
       else
           test -z "$file" || exec >$file
           echo ".ab help2man is required to generate this page"
           exit 1
       fi
       ;;
   
   makeinfo)    makeinfo)
       if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then
          # We have makeinfo, but it failed.
          exit 1
       fi
   
     echo 1>&2 "\      echo 1>&2 "\
 WARNING: \`$1' is missing on your system.  You should only need it if  WARNING: \`$1' is missing on your system.  You should only need it if
          you modified a \`.texi' or \`.texinfo' file, or any other file           you modified a \`.texi' or \`.texinfo' file, or any other file
Line 173 
Line 282 
     touch $file      touch $file
     ;;      ;;
   
     tar)
       shift
       if test -n "$run"; then
         echo 1>&2 "ERROR: \`tar' requires --run"
         exit 1
       fi
   
       # We have already tried tar in the generic part.
       # Look for gnutar/gtar before invocation to avoid ugly error
       # messages.
       if (gnutar --version > /dev/null 2>&1); then
          gnutar "$@" && exit 0
       fi
       if (gtar --version > /dev/null 2>&1); then
          gtar "$@" && exit 0
       fi
       firstarg="$1"
       if shift; then
           case "$firstarg" in
           *o*)
               firstarg=`echo "$firstarg" | sed s/o//`
               tar "$firstarg" "$@" && exit 0
               ;;
           esac
           case "$firstarg" in
           *h*)
               firstarg=`echo "$firstarg" | sed s/h//`
               tar "$firstarg" "$@" && exit 0
               ;;
           esac
       fi
   
       echo 1>&2 "\
   WARNING: I can't seem to be able to run \`tar' with the given arguments.
            You may want to install GNU tar or Free paxutils, or check the
            command line arguments."
       exit 1
       ;;
   
   *)    *)
     echo 1>&2 "\      echo 1>&2 "\
 WARNING: \`$1' is needed, and you do not seem to have it handy on your  WARNING: \`$1' is needed, and you do not seem to have it handy on your

Generate output suitable for use with a patch program
Legend:
Removed from v.1.1  
changed lines
  Added in v.1.2
CVS Admin

Powered by ViewCVS 1.0-dev 		(Powered by ViewCVS)

ViewCVS and CVS Help