[gforth] / gforth / Attic / decstation.h  

gforth: gforth/Attic/decstation.h


1 : anton 1.1 /*
2 :     $Id: decstation.h,v 1.8 1993/05/25 10:24:18 anton Exp $
3 :     Copyright 1992 by the ANSI figForth Development Group
4 :    
5 :     This is the machine-specific part for a Decstation running Ultrix
6 :     */
7 :    
8 :    
9 :     /* Cell and UCell must be the same size as a pointer */
10 :     typedef long Cell;
11 :     typedef unsigned long UCell;
12 :    
13 :     /* DCell and UDCell must be twice as large as Cell */
14 :     typedef long long DCell;
15 :     typedef unsigned long long UDCell;
16 :    
17 :     /* define this if IEEE singles and doubles are available as C data types */
18 :     #define IEEE_FP
19 :    
20 :     /* the IEEE types are used only for loading and storing */
21 :     /* the IEEE double precision type */
22 :     typedef double DFloat;
23 :     /* the IEEE single precision type */
24 :     typedef float SFloat;
25 :    
26 :     /* define this if the least-significant byte is at the largets address */
27 :     /* #define BIG_ENDIAN */
28 :    
29 :     /* some definitions for composing opcodes */
30 :     #define JUMP_MASK 0x03ffffff
31 :     #define J_PATTERN 0x08000000
32 :     #define JAL_PATTERN 0x0c000000
33 :     /* this provides the first 4 bits of a jump address, i.e. it must be <16 */
34 :     #define SEGMENT_NUM 1
35 :    
36 :     #ifdef DIRECT_THREADED
37 :     /* PFA gives the parameter field address corresponding to a cfa */
38 :     # define PFA(cfa) (((Cell *)cfa)+2)
39 :     /* PFA1 is a special version for use just after a NEXT1 */
40 :     # define PFA1(cfa) PFA(cfa)
41 :     /* CODE_ADDRESS is the address of the code jumped to through the code field */
42 :     # define CODE_ADDRESS(cfa) ((Label)(((*(unsigned *)(cfa))^J_PATTERN^(SEGMENT_NUM<<26))<<2))
43 :     /* MAKE_CF creates an appropriate code field at the cfa; ca is the code address */
44 :     # define MAKE_CF(cfa,ca) ({long * _cfa = (long *)(cfa); \
45 :     _cfa[0] = J_PATTERN|((((long)(ca))&JUMP_MASK)>>2); /* J ca */ \
46 :     _cfa[1] = 0; /* nop */})
47 :     # ifdef undefined
48 :     /* the following version uses JAL to make PFA1 faster */
49 :     # define PFA1(label) ({register Cell *pfa asm("$31"); \
50 :     pfa; })
51 :     /* CODE_ADDRESS is the address of the code jumped to through the code field */
52 :     # define CODE_ADDRESS(cfa) ((Label)(((*(unsigned *)(cfa))^JAL_PATTERN^(SEGMENT_NUM<<26))<<2))
53 :     # define MAKE_CF(cfa,ca) ({long *_cfa = (long *)(cfa); \
54 : pazsan 1.2 long _ca = (long)(ca); \
55 :     _cfa[0] = JAL_PATTERN|(((((long)_ca)>>2))&JUMP_MASK); /* JAL ca+4 */ \
56 :     _cfa[1] = 0; /* *(long *)_ca; delay slot */})
57 : anton 1.1 # endif /* undefined */
58 :    
59 :     /* this is the point where the does code starts if label points to the
60 :     * jump dodoes */
61 :     # define DOES_CODE(cfa) ((Xt *)(((char *)CODE_ADDRESS(cfa))+8))
62 :    
63 :     /* this is a special version of DOES_CODE for use in dodoes */
64 :     # define DOES_CODE1(cfa) DOES_CODE(cfa)
65 :    
66 :     # define DOES_HANDLER_SIZE 8
67 : pazsan 1.2 # define MAKE_DOES_CF(cfa,does_code) \
68 :     ({long does_handlerp=((long)(does_code))-DOES_HANDLER_SIZE; \
69 :     long *_cfa = (long*)(cfa); \
70 :     _cfa[0] = J_PATTERN|((does_handlerp&JUMP_MASK)>>2); /* J ca */ \
71 :     _cfa[1] = 0; /* nop */})
72 :     /*
73 : anton 1.1 # define MAKE_DOES_CF(cfa, does_code) ({char *does_handlerp=((char *)does_code)-DOES_HANDLER_SIZE; \
74 :     MAKE_CF(cfa,does_handlerp); \
75 : pazsan 1.2 MAKE_DOES_HANDLER(does_handlerp) ;})
76 :     */
77 : anton 1.1 /* this stores a jump dodoes at addr */
78 : pazsan 1.2 # define MAKE_DOES_HANDLER(addr) MAKE_CF(addr,symbols[DODOES])
79 :    
80 : anton 1.1 #endif
81 :     #ifdef undefined
82 :     /* and here are some more efficient versions that can be tried later */
83 :    
84 :     /* the first version saves one cycle by doing something useful in the
85 :     delay slot. !! check that the instruction in the delay slot is legal
86 :     */
87 :    
88 :     #define MAKE_DOESJUMP(addr) ({long * _addr = (long *)addr; \
89 : pazsan 1.2 _addr[0] = J_PATTERN|(((((long)symbols[DODOES])>>2)+4)&JUMP_MASK), /* J dodoes+4 */ \
90 :     _addr[1] = *(long *)symbols[DODOES]; /* delay */})
91 : anton 1.1
92 :     /* the following version uses JAL to make DOES_CODE1 faster */
93 :     /* !! does the declaration clear the register ? */
94 :     /* it's ok to use the same reg as in PFA1:
95 :     dodoes is the only potential problem and I have taken care of it */
96 : pazsan 1.2
97 : anton 1.1 #define DOES_CODE1(cfa) ({register Code *_does_code asm("$31"); \
98 :     _does_code; })
99 :     #define MAKE_DOESJUMP(addr) ({long * _addr = (long *)addr; \
100 : pazsan 1.2 _addr[0] = JAL_PATTERN|(((((long)symbols[DODOES])>>2)+4)&JUMP_MASK), /* JAL dodoes+4 */ \
101 :     _addr[1] = *(long *)symbols[DODOES]; /* delay */})
102 : anton 1.1
103 :     #endif
104 : pazsan 1.2

CVS Admin

Powered by ViewCVS 1.0-dev
(Powered by ViewCVS)

ViewCVS and CVS Help