dnl Process this file with autoconf to produce a configure script. #Copyright (C) 1995,1996,1997,1998 Free Software Foundation, Inc. #This file is part of Gforth. #Gforth is free software; you can redistribute it and/or #modify it under the terms of the GNU General Public License #as published by the Free Software Foundation; either version 2 #of the License, or (at your option) any later version. #This program is distributed in the hope that it will be useful, #but WITHOUT ANY WARRANTY; without even the implied warranty of #MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.#See the #GNU General Public License for more details. #You should have received a copy of the GNU General Public License #along with this program; if not, write to the Free Software #Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. AC_INIT(engine/engine.c) dnl We use some automake macros here, dnl but don't use automake for creating Makefile.in AM_INIT_AUTOMAKE(gforth,0.4.0) AM_CONFIG_HEADER(engine/config.h) AM_CYGWIN32 AC_ARG_ENABLE(force-reg, [ --enable-force-reg Use explicit register declarations if they appear in the machine.h file. This can cause a good speedup, but also incorrect code with some gcc versions on some processors (default disabled).], AC_DEFINE(FORCE_REG)) dnl this is not quite according to the autoconf manual, it causes a replacement AC_ARG_ENABLE(direct-threaded, [ --enable-direct-threaded Force direct threading. This may not work on some machines and may cause slowdown on others. (default processor-dependent)], AC_DEFINE(DIRECT_THREADED)) AC_ARG_ENABLE(indirect-threaded, [ --enable-indirect-threaded Force indirect threading. This can cause a slowdown on some machines. (default processor-dependent)], AC_DEFINE(INDIRECT_THREADED)) AC_ARG_WITH(debug, [ --with-debug specifies option -g to compile with debug info (default) --without-debug omits the -g switch and creates smaller images on machines where "strip" has problems with gcc style debugging informations.], if test "$withval" = "yes"; then DEBUGFLAG=-g; fi) CFLAGS=$CFLAGS AC_PROG_CC if test "$GCC" = "yes" then echo "Fine, gcc is available" else cat <<'EOF' Gforth requires GCC-2.0 or higher (it uses GNU C extensions). It does not work with other C compilers. Please install the GNU C compiler, and try again (or search for a binary distribution for your platform). EOF exit 1 fi AC_SUBST(CC) AC_SUBST(DEBUGFLAG) dnl the following macro produces a warning with autoconf-2.1 AC_CHECK_SIZEOF(char *) case "$ac_cv_sizeof_char_p" in 2) wordsize=16 ;; 4) wordsize=32 ;; 8) wordsize=64 ;; esac AC_CHECK_SIZEOF(char) AC_CHECK_SIZEOF(short) AC_CHECK_SIZEOF(int) AC_CHECK_SIZEOF(long) AC_CHECK_SIZEOF(long long) ac_cv_int_type_cell=none case "$ac_cv_sizeof_char_p" in $ac_cv_sizeof_int) ac_cv_int_type_cell=int ;; $ac_cv_sizeof_short) ac_cv_int_type_cell=short ;; $ac_cv_sizeof_char) ac_cv_int_type_cell=char ;; $ac_cv_sizeof_long) ac_cv_int_type_cell=long ;; $ac_cv_sizeof_long_long) ac_cv_int_type_cell="long long" ;; esac if test "$ac_cv_int_type_cell" != int; then echo "So, sizeof(pointer)!=sizeof(int); looks like a DOS C compiler to me." echo "Since you don't have a proper C on this machine, that's one more reason" echo "to use Forth;-)" fi AC_DEFINE_UNQUOTED(CELL_TYPE,$ac_cv_int_type_cell) ac_cv_int_type_double_cell=none case `expr 2 '*' "$ac_cv_sizeof_char_p"` in $ac_cv_sizeof_short) ac_cv_int_type_double_cell=short ;; $ac_cv_sizeof_int) ac_cv_int_type_double_cell=int ;; $ac_cv_sizeof_long) ac_cv_int_type_double_cell=long ;; $ac_cv_sizeof_long_long) ac_cv_int_type_double_cell="long long" ;; esac if test "$ac_cv_int_type_double_cell" = none; then echo "Emulating double-cell arithmetic. This may be slow." echo "If you find this unacceptable, ask the GCC maintainers to provide proper" echo 'long longs for your machine (the GCC manual states that they \"are twice as' echo "long as \`long int\'\")." LIBOBJS="$LIBOBJS dblsub.o" AC_DEFINE(BUGGY_LONG_LONG) else AC_DEFINE_UNQUOTED(DOUBLE_CELL_TYPE,$ac_cv_int_type_double_cell) fi #terminology is a bit unusual here: The host is the system on which #gforth will run; the system on which configure will run is the `build' AC_CANONICAL_HOST case "$host_cpu" in hppa*) machine=hppa LIBOBJS="$LIBOBJS ../arch/hppa/cache.o" LDFLAGS="-Xlinker -N" LIBS="-L/lib/pa1.1/" if test "${enable_direct_threaded+set}" = "" then AC_DEFINE(DIRECT_THREADED) fi ;; sparc*) machine=sparc ;; i386) machine=386 CFLAGS="$CFLAGS -fomit-frame-pointer -fforce-addr -fforce-mem" if test "${enable_direct_threaded+set}" = "" \ -a "${enable_indirect_threaded+set}" = "" then echo "Using direct threaded code on 386" AC_DEFINE(DIRECT_THREADED) fi ;; i486) machine=386 CFLAGS="$CFLAGS -fomit-frame-pointer -fforce-addr -fforce-mem -m486" if test "${enable_direct_threaded+set}" = "" \ -a "${enable_indirect_threaded+set}" = "" then echo "Using direct threaded code on 486" AC_DEFINE(DIRECT_THREADED) fi ;; i586|i686) machine=386 CFLAGS="$CFLAGS -fomit-frame-pointer -fforce-addr -fforce-mem -m486" if test "${enable_direct_threaded+set}" = "" \ -a "${enable_indirect_threaded+set}" = "" then echo "Using indirect threaded code on Pentium and up" AC_DEFINE(INDIRECT_THREADED) fi ;; m68k) machine=m68k CFLAGS="$CFLAGS -fomit-frame-pointer" if test "$host_os" = "nextstep3" then LIBOBJS="$LIBOBJS termios.o" fi ;; mips*) machine=mips #link text and data segment into the same 256M region! AC_MSG_CHECKING([whether the linker accepts -D]) OLDLDFLAGS=$LDFLAGS LDFLAGS="$LDFLAGS -Xlinker -T -Xlinker 10000000 -Xlinker -D -Xlinker 10400000" AC_TRY_LINK(,,ac_link_mips_d=yes,ac_link_mips_d=no) test $ac_link_mips_d = yes||LDFLAGS="$OLDLDFLAGS -Xlinker -T -Xlinker 10000000" AC_MSG_RESULT($ac_link_mips_d) ;; alpha*) machine=alpha ;; power*) machine=power AC_CHECK_FUNC(_sync_cache_range,true,LIBOBJS="$LIBOBJS ../arch/power/_sync_cache_range.o") ;; *) echo "No direct threading support for $host_cpu, using indirect threading." echo "Using a generic machine description." echo "I'll assume that C floats and doubles are represented by IEEE single and" echo "double numbers. If this is not so, SF@ etc. will not work correctly." echo "FLUSH-ICACHE will do nothing, so END-CODE may not work properly!" machine=generic esac AC_SUBST(host) AC_SUBST(ENGINE_FLAGS) case "$host_os" in *win32) EXE=".exe" ;; *) EXE="" ;; esac AC_SUBST(EXE) dnl Now a little support for DOS/DJGCC AC_SUBST(GFORTH_EXE) GFORTH_EXE="" AC_SUBST(GFORTHDITC_EXE) GFORTHDITC_EXE="" PATHSEP=":" AC_SUBST(PATHSEP) AC_DEFINE_UNQUOTED(PATHSEP,'$PATHSEP') AC_SUBST(FORTHSIZES) dnl copy commands for systems that don't have links AC_SUBST(LINK_KERNL) LINK_KERNL="" #if test $host_os=dos #then # echo Configuring for DOS!!! # MAKE_EXE="coff2exe gforth" # LINK_KERNL='$(CP) kernl32l.fi kernel.fi' #fi dnl the following macro produces a warning with autoconf-2.1 AC_C_BIGENDIAN AC_SUBST(KERNEL) dnl ac_cv_c_bigendian is an undocumented variable of autoconf-2.1 if test $ac_cv_c_bigendian = yes; then bytesex=b KERNEL="kernl16b.fi kernl16l.fi kernl32b.fi kernl32l.fi kernl64b.fi kernl64l.fi" else bytesex=l KERNEL="kernl16l.fi kernl16b.fi kernl32l.fi kernl32b.fi kernl64l.fi kernl64b.fi" fi dnl Checks for programs. AC_PROG_LN_S dnl AM_PROG_INSTALL #performed by AM_INIT_AUTOMAKE dnl Checks for library functions dnl This check is just for making later checks link with libm. dnl using sin here is no good idea since it is built-into gcc and typechecked AC_CHECK_LIB(m,asin) AC_CHECK_LIB(dl,dlopen) if test "$host_os" != "nextstep3" then AC_FUNC_MEMCMP fi AC_REPLACE_FUNCS(memmove strtoul pow10 strerror strsignal atanh) AC_CHECK_FUNCS(dlopen sys_siglist) AC_DECL_SYS_SIGLIST AC_CHECK_FUNC(getopt_long,true,LIBOBJS="$LIBOBJS getopt.o getopt1.o") AC_CHECK_FUNCS(rint expm1 log1p) AC_REPLACE_FUNCS(ecvt) dnl No check for select, because our replacement is no good under dnl anything but DOS AC_CHECK_HEADERS(sys/mman.h) AC_CHECK_FUNCS(mmap sysconf getpagesize) AM_PATH_LISPDIR kernel_fi=kernl${wordsize}${bytesex}.fi AC_SUBST(kernel_fi) AC_SUBST(machine) dnl AC_LINK_FILES(arch/$machine,arch/machine) #no longer needed AC_OUTPUT([ Makefile gforthmi engine/Makefile doc/version.texi ], echo timestamp > stamp-h chmod +x gforthmi test -d kernel||mkdir kernel)