` -> ` }T .
\ This executes ```
and compares the resulting stack contents with
\ the
``` values, and reports any discrepancy between the
\ two sets of values.
\ For example:
\ T{ 1 2 3 swap -> 1 3 2 }T ok
\ T{ 1 2 3 swap -> 1 2 2 }T INCORRECT RESULT: T{ 1 2 3 swap -> 1 2 2 }T ok
\ T{ 1 2 3 swap -> 1 2 }T WRONG NUMBER OF RESULTS: T{ 1 2 3 swap -> 1 2 }T ok
\ Floating point testing can involve further complications. The code
\ attempts to determine whether floating-point support is present, and
\ if so, whether there is a separate floating-point stack, and behave
\ accordingly. The CONSTANTs HAS-FLOATING and HAS-FLOATING-STACK
\ contain the results of its efforts, so the behavior of the code can
\ be modified by the user if necessary.
\ Then there are the perennial issues of floating point value
\ comparisons. Exact equality is specified by SET-EXACT (the
\ default). If approximate equality tests are desired, execute
\ SET-NEAR . Then the FVARIABLEs REL-NEAR (default 1E-12) and
\ ABS-NEAR (default 0E) contain the values to be used in comparisons
\ by the (internal) word FNEARLY= .
\ When there is not a separate floating point stack and you want to
\ use approximate equality for FP values, it is necessary to identify
\ which stack items are floating point quantities. This can be done
\ by replacing the closing }T with a version that specifies this, such
\ as RRXR}T which identifies the stack picture ( r r x r ). The code
\ provides such words for all combinations of R and X with up to four
\ stack items. They can be used with either an integrated or separate
\ floating point stacks. Adding more if you need them is
\ straightforward; see the examples in the source. Here is an example
\ which also illustrates controlling the precision of comparisons:
\ SET-NEAR
\ 1E-6 REL-NEAR F!
\ T{ S" 3.14159E" >FLOAT -> -1E FACOS TRUE RX}T
\ The word ERROR is now vectored, so that its action can be changed by
\ the user (for example, to add a counter for the number of errors).
\ The default action ERROR1 can be used as a factor in the display of
\ error reports.
\ Loading ttester.fs does not change BASE. Remember that floating point input
\ is ambiguous if the base is not decimal.
\ The file defines some 70 words in all, but in most cases only the
\ ones mentioned above will be needed for successful testing.
BASE @
HEX
VARIABLE ACTUAL-DEPTH \ stack record
CREATE ACTUAL-RESULTS 20 CELLS ALLOT
VARIABLE START-DEPTH
VARIABLE XCURSOR \ for ...}T
VARIABLE ERROR-XT
: ERROR ERROR-XT @ EXECUTE ; \ for vectoring of error reporting
: "FLOATING" S" FLOATING" ; \ only compiled S" in CORE
: "FLOATING-STACK" S" FLOATING-STACK" ;
"FLOATING" ENVIRONMENT? [IF]
[IF]
TRUE
[ELSE]
FALSE
[THEN]
[ELSE]
FALSE
[THEN] CONSTANT HAS-FLOATING
"FLOATING-STACK" ENVIRONMENT? [IF]
[IF]
TRUE
[ELSE]
FALSE
[THEN]
[ELSE] \ We don't know whether the FP stack is separate.
HAS-FLOATING \ If we have FLOATING, we assume it is.
[THEN] CONSTANT HAS-FLOATING-STACK
HAS-FLOATING [IF]
\ Set the following to the relative and absolute tolerances you
\ want for approximate float equality, to be used with F~ in
\ FNEARLY=. Keep the signs, because F~ needs them.
FVARIABLE REL-NEAR DECIMAL 1E-12 HEX REL-NEAR F!
FVARIABLE ABS-NEAR DECIMAL 0E HEX ABS-NEAR F!
\ When EXACT? is TRUE, }F uses FEXACTLY=, otherwise FNEARLY=.
TRUE VALUE EXACT?
: SET-EXACT ( -- ) TRUE TO EXACT? ;
: SET-NEAR ( -- ) FALSE TO EXACT? ;
DECIMAL
: FEXACTLY= ( F: X Y -- S: FLAG )
(
Leave TRUE if the two floats are identical.
)
0E F~ ;
HEX
: FABS= ( F: X Y -- S: FLAG )
(
Leave TRUE if the two floats are equal within the tolerance
stored in ABS-NEAR.
)
ABS-NEAR F@ F~ ;
: FREL= ( F: X Y -- S: FLAG )
(
Leave TRUE if the two floats are relatively equal based on the
tolerance stored in ABS-NEAR.
)
REL-NEAR F@ FNEGATE F~ ;
: F2DUP FOVER FOVER ;
: F2DROP FDROP FDROP ;
: FNEARLY= ( F: X Y -- S: FLAG )
(
Leave TRUE if the two floats are nearly equal. This is a
refinement of Dirk Zoller's FEQ to also allow X = Y, including
both zero, or to allow approximately equality when X and Y are too
small to satisfy the relative approximation mode in the F~
specification.
)
F2DUP FEXACTLY= IF F2DROP TRUE EXIT THEN
F2DUP FREL= IF F2DROP TRUE EXIT THEN
FABS= ;
: FCONF= ( R1 R2 -- F )
EXACT? IF
FEXACTLY=
ELSE
FNEARLY=
THEN ;
[THEN]
HAS-FLOATING-STACK [IF]
VARIABLE ACTUAL-FDEPTH
CREATE ACTUAL-FRESULTS 20 FLOATS ALLOT
VARIABLE START-FDEPTH
VARIABLE FCURSOR
DECIMAL
: EMPTY-FSTACK ( ... -- ... )
FDEPTH START-FDEPTH @ < IF
FDEPTH START-FDEPTH @ SWAP DO 0E LOOP
THEN
FDEPTH START-FDEPTH @ > IF
FDEPTH START-FDEPTH @ DO FDROP LOOP
THEN ;
HEX
: F{ ( -- )
FDEPTH START-FDEPTH ! 0 FCURSOR ! ;
: F-> ( ... -- ... )
FDEPTH DUP ACTUAL-FDEPTH !
START-FDEPTH @ > IF
FDEPTH START-FDEPTH @ - 0 DO ACTUAL-FRESULTS I FLOATS + F! LOOP
THEN ;
: F} ( ... -- ... )
FDEPTH ACTUAL-FDEPTH @ = IF
FDEPTH START-FDEPTH @ > IF
FDEPTH START-FDEPTH @ - 0 DO
ACTUAL-FRESULTS I FLOATS + F@ FCONF= INVERT IF
S" INCORRECT FP RESULT: " ERROR LEAVE
THEN
LOOP
THEN
ELSE
S" WRONG NUMBER OF FP RESULTS: " ERROR
THEN ;
: F...}T ( -- )
FCURSOR @ START-FDEPTH @ + ACTUAL-FDEPTH @ <> IF
S" NUMBER OF FLOAT RESULTS BEFORE '->' DOES NOT MATCH ...}T SPECIFICATION: " ERROR
ELSE FDEPTH START-FDEPTH @ = 0= IF
S" NUMBER OF FLOAT RESULTS BEFORE AND AFTER '->' DOES NOT MATCH: " ERROR
THEN THEN ;
: FTESTER ( R -- )
FDEPTH 0= ACTUAL-FDEPTH @ FCURSOR @ START-FDEPTH @ + 1+ < OR IF
S" NUMBER OF FLOAT RESULTS AFTER '->' BELOW ...}T SPECIFICATION: " ERROR
ELSE ACTUAL-FRESULTS FCURSOR @ FLOATS + F@ FCONF= 0= IF
S" INCORRECT FP RESULT: " ERROR
THEN THEN
1 FCURSOR +! ;
[ELSE]
: EMPTY-FSTACK ;
: F{ ;
: F-> ;
: F} ;
: F...}T ;
HAS-FLOATING [IF]
DECIMAL
: COMPUTE-CELLS-PER-FP ( -- U )
DEPTH 0E DEPTH 1- >R FDROP R> SWAP - ;
HEX
COMPUTE-CELLS-PER-FP CONSTANT CELLS-PER-FP
: FTESTER ( R -- )
DEPTH CELLS-PER-FP < ACTUAL-DEPTH @ XCURSOR @ START-DEPTH @ + CELLS-PER-FP + < OR IF
S" NUMBER OF RESULTS AFTER '->' BELOW ...}T SPECIFICATION: " ERROR EXIT
ELSE ACTUAL-RESULTS XCURSOR @ CELLS + F@ FCONF= 0= IF
S" INCORRECT FP RESULT: " ERROR
THEN THEN
CELLS-PER-FP XCURSOR +! ;
[THEN]
[THEN]
: EMPTY-STACK \ ( ... -- ) empty stack; handles underflowed stack too.
DEPTH START-DEPTH @ < IF
DEPTH START-DEPTH @ SWAP DO 0 LOOP
THEN
DEPTH START-DEPTH @ > IF
DEPTH START-DEPTH @ DO DROP LOOP
THEN
EMPTY-FSTACK ;
: ERROR1 \ ( C-ADDR U -- ) display an error message
\ followed by the line that had the error.
TYPE SOURCE TYPE CR \ display line corresponding to error
EMPTY-STACK \ throw away everything else
;
' ERROR1 ERROR-XT !
: T{ \ ( -- ) syntactic sugar.
DEPTH START-DEPTH ! 0 XCURSOR ! F{ ;
: -> \ ( ... -- ) record depth and contents of stack.
DEPTH DUP ACTUAL-DEPTH ! \ record depth
START-DEPTH @ > IF \ if there is something on the stack
DEPTH START-DEPTH @ - 0 DO ACTUAL-RESULTS I CELLS + ! LOOP \ save them
THEN
F-> ;
: }T \ ( ... -- ) COMPARE STACK (EXPECTED) CONTENTS WITH SAVED
\ (ACTUAL) CONTENTS.
DEPTH ACTUAL-DEPTH @ = IF \ if depths match
DEPTH START-DEPTH @ > IF \ if there is something on the stack
DEPTH START-DEPTH @ - 0 DO \ for each stack item
ACTUAL-RESULTS I CELLS + @ \ compare actual with expected
<> IF S" INCORRECT RESULT: " ERROR LEAVE THEN
LOOP
THEN
ELSE \ depth mismatch
S" WRONG NUMBER OF RESULTS: " ERROR
THEN
F} ;
: ...}T ( -- )
XCURSOR @ START-DEPTH @ + ACTUAL-DEPTH @ <> IF
S" NUMBER OF CELL RESULTS BEFORE '->' DOES NOT MATCH ...}T SPECIFICATION: " ERROR
ELSE DEPTH START-DEPTH @ = 0= IF
S" NUMBER OF CELL RESULTS BEFORE AND AFTER '->' DOES NOT MATCH: " ERROR
THEN THEN
F...}T ;
: XTESTER ( X -- )
DEPTH 0= ACTUAL-DEPTH @ XCURSOR @ START-DEPTH @ + 1+ < OR IF
S" NUMBER OF CELL RESULTS AFTER '->' BELOW ...}T SPECIFICATION: " ERROR EXIT
ELSE ACTUAL-RESULTS XCURSOR @ CELLS + @ <> IF
S" INCORRECT CELL RESULT: " ERROR
THEN THEN
1 XCURSOR +! ;
: X}T XTESTER ...}T ;
: XX}T XTESTER XTESTER ...}T ;
: XXX}T XTESTER XTESTER XTESTER ...}T ;
: XXXX}T XTESTER XTESTER XTESTER XTESTER ...}T ;
HAS-FLOATING [IF]
: R}T FTESTER ...}T ;
: XR}T FTESTER XTESTER ...}T ;
: RX}T XTESTER FTESTER ...}T ;
: RR}T FTESTER FTESTER ...}T ;
: XXR}T FTESTER XTESTER XTESTER ...}T ;
: XRX}T XTESTER FTESTER XTESTER ...}T ;
: XRR}T FTESTER FTESTER XTESTER ...}T ;
: RXX}T XTESTER XTESTER FTESTER ...}T ;
: RXR}T FTESTER XTESTER FTESTER ...}T ;
: RRX}T XTESTER FTESTER FTESTER ...}T ;
: RRR}T FTESTER FTESTER FTESTER ...}T ;
: XXXR}T FTESTER XTESTER XTESTER XTESTER ...}T ;
: XXRX}T XTESTER FTESTER XTESTER XTESTER ...}T ;
: XXRR}T FTESTER FTESTER XTESTER XTESTER ...}T ;
: XRXX}T XTESTER XTESTER FTESTER XTESTER ...}T ;
: XRXR}T FTESTER XTESTER FTESTER XTESTER ...}T ;
: XRRX}T XTESTER FTESTER FTESTER XTESTER ...}T ;
: XRRR}T FTESTER FTESTER FTESTER XTESTER ...}T ;
: RXXX}T XTESTER XTESTER XTESTER FTESTER ...}T ;
: RXXR}T FTESTER XTESTER XTESTER FTESTER ...}T ;
: RXRX}T XTESTER FTESTER XTESTER FTESTER ...}T ;
: RXRR}T FTESTER FTESTER XTESTER FTESTER ...}T ;
: RRXX}T XTESTER XTESTER FTESTER FTESTER ...}T ;
: RRXR}T FTESTER XTESTER FTESTER FTESTER ...}T ;
: RRRX}T XTESTER FTESTER FTESTER FTESTER ...}T ;
: RRRR}T FTESTER FTESTER FTESTER FTESTER ...}T ;
[THEN]
\ Set the following flag to TRUE for more verbose output; this may
\ allow you to tell which test caused your system to hang.
VARIABLE VERBOSE
FALSE VERBOSE !
: TESTING \ ( -- ) TALKING COMMENT.
SOURCE VERBOSE @
IF DUP >R TYPE CR R> >IN !
ELSE >IN ! DROP
THEN ;
BASE !
\ end of ttester.fs