Return to ttester.fs CVS log | Up to [gforth] / gforth / test |

File:
[gforth] / gforth / test / ttester.fs

Revision**1.14**: download - view: text, annotated - select for diffs

*Wed Apr 8 19:59:17 2009 UTC* (10 years ago) by *anton*

Branches: MAIN

CVS tags: HEAD

Revision

Branches: MAIN

CVS tags: HEAD

Comments made nicer by Charles G Montgomery et al.

\ This file contains the code for ttester, a utility for testing Forth words, \ as developed by several authors (see below), together with some explanations \ of its use. \ ttester is based on the original tester suite by Hayes: \ From: John Hayes S1I \ Subject: tester.fr \ Date: Mon, 27 Nov 95 13:10:09 PST \ (C) 1995 JOHNS HOPKINS UNIVERSITY / APPLIED PHYSICS LABORATORY \ MAY BE DISTRIBUTED FREELY AS LONG AS THIS COPYRIGHT NOTICE REMAINS. \ VERSION 1.1 \ All the subsequent changes have been placed in the public domain. \ The primary changes from the original are the replacement of "{" by "T{" \ and "}" by "}T" (to avoid conflicts with the uses of { for locals and } \ for FSL arrays), modifications so that the stack is allowed to be non-empty \ before T{, and extensions for the handling of floating point tests. \ Code for testing equality of floating point values comes \ from ftester.fs written by David N. Williams, based on the idea of \ approximate equality in Dirk Zoller's float.4th. \ Further revisions were provided by Anton Ertl, including the ability \ to handle either integrated or separate floating point stacks. \ Revision history and possibly newer versions can be found at \ http://www.complang.tuwien.ac.at/cvsweb/cgi-bin/cvsweb/gforth/test/ttester.fs \ Explanatory material and minor reformatting (no code changes) by \ C. G. Montgomery March 2009, with helpful comments from David Williams \ and Krishna Myneni. \ Usage: \ The basic usage takes the form T{ <code> -> <expected stack> }T . \ This executes <code> and compares the resulting stack contents with \ the <expected stack> values, and reports any discrepancy between the \ two sets of values. \ For example: \ T{ 1 2 3 swap -> 1 3 2 }T ok \ T{ 1 2 3 swap -> 1 2 2 }T INCORRECT RESULT: T{ 1 2 3 swap -> 1 2 2 }T ok \ T{ 1 2 3 swap -> 1 2 }T WRONG NUMBER OF RESULTS: T{ 1 2 3 swap -> 1 2 }T ok \ Floating point testing can involve further complications. The code \ attempts to determine whether floating-point support is present, and \ if so, whether there is a separate floating-point stack, and behave \ accordingly. The CONSTANTs HAS-FLOATING and HAS-FLOATING-STACK \ contain the results of its efforts, so the behavior of the code can \ be modified by the user if necessary. \ Then there are the perennial issues of floating point value \ comparisons. Exact equality is specified by SET-EXACT (the \ default). If approximate equality tests are desired, execute \ SET-NEAR . Then the FVARIABLEs REL-NEAR (default 1E-12) and \ ABS-NEAR (default 0E) contain the values to be used in comparisons \ by the (internal) word FNEARLY= . \ When there is not a separate floating point stack and you want to \ use approximate equality for FP values, it is necessary to identify \ which stack items are floating point quantities. This can be done \ by replacing the closing }T with a version that specifies this, such \ as RRXR}T which identifies the stack picture ( r r x r ). The code \ provides such words for all combinations of R and X with up to four \ stack items. They can be used with either an integrated or separate \ floating point stacks. Adding more if you need them is \ straightforward; see the examples in the source. Here is an example \ which also illustrates controlling the precision of comparisons: \ SET-NEAR \ 1E-6 REL-NEAR F! \ T{ S" 3.14159E" >FLOAT -> -1E FACOS TRUE RX}T \ The word ERROR is now vectored, so that its action can be changed by \ the user (for example, to add a counter for the number of errors). \ The default action ERROR1 can be used as a factor in the display of \ error reports. \ Loading ttester.fs does not change BASE. Remember that floating point input \ is ambiguous if the base is not decimal. \ The file defines some 70 words in all, but in most cases only the \ ones mentioned above will be needed for successful testing. BASE @ HEX VARIABLE ACTUAL-DEPTH \ stack record CREATE ACTUAL-RESULTS 20 CELLS ALLOT VARIABLE START-DEPTH VARIABLE XCURSOR \ for ...}T VARIABLE ERROR-XT : ERROR ERROR-XT @ EXECUTE ; \ for vectoring of error reporting : "FLOATING" S" FLOATING" ; \ only compiled S" in CORE : "FLOATING-STACK" S" FLOATING-STACK" ; "FLOATING" ENVIRONMENT? [IF] [IF] TRUE [ELSE] FALSE [THEN] [ELSE] FALSE [THEN] CONSTANT HAS-FLOATING "FLOATING-STACK" ENVIRONMENT? [IF] [IF] TRUE [ELSE] FALSE [THEN] [ELSE] \ We don't know whether the FP stack is separate. HAS-FLOATING \ If we have FLOATING, we assume it is. [THEN] CONSTANT HAS-FLOATING-STACK HAS-FLOATING [IF] \ Set the following to the relative and absolute tolerances you \ want for approximate float equality, to be used with F~ in \ FNEARLY=. Keep the signs, because F~ needs them. FVARIABLE REL-NEAR DECIMAL 1E-12 HEX REL-NEAR F! FVARIABLE ABS-NEAR DECIMAL 0E HEX ABS-NEAR F! \ When EXACT? is TRUE, }F uses FEXACTLY=, otherwise FNEARLY=. TRUE VALUE EXACT? : SET-EXACT ( -- ) TRUE TO EXACT? ; : SET-NEAR ( -- ) FALSE TO EXACT? ; DECIMAL : FEXACTLY= ( F: X Y -- S: FLAG ) ( Leave TRUE if the two floats are identical. ) 0E F~ ; HEX : FABS= ( F: X Y -- S: FLAG ) ( Leave TRUE if the two floats are equal within the tolerance stored in ABS-NEAR. ) ABS-NEAR F@ F~ ; : FREL= ( F: X Y -- S: FLAG ) ( Leave TRUE if the two floats are relatively equal based on the tolerance stored in ABS-NEAR. ) REL-NEAR F@ FNEGATE F~ ; : F2DUP FOVER FOVER ; : F2DROP FDROP FDROP ; : FNEARLY= ( F: X Y -- S: FLAG ) ( Leave TRUE if the two floats are nearly equal. This is a refinement of Dirk Zoller's FEQ to also allow X = Y, including both zero, or to allow approximately equality when X and Y are too small to satisfy the relative approximation mode in the F~ specification. ) F2DUP FEXACTLY= IF F2DROP TRUE EXIT THEN F2DUP FREL= IF F2DROP TRUE EXIT THEN FABS= ; : FCONF= ( R1 R2 -- F ) EXACT? IF FEXACTLY= ELSE FNEARLY= THEN ; [THEN] HAS-FLOATING-STACK [IF] VARIABLE ACTUAL-FDEPTH CREATE ACTUAL-FRESULTS 20 FLOATS ALLOT VARIABLE START-FDEPTH VARIABLE FCURSOR : EMPTY-FSTACK ( ... -- ... ) FDEPTH START-FDEPTH @ < IF FDEPTH START-FDEPTH @ SWAP DO 0E LOOP THEN FDEPTH START-FDEPTH @ > IF FDEPTH START-FDEPTH @ DO FDROP LOOP THEN ; : F{ ( -- ) FDEPTH START-FDEPTH ! 0 FCURSOR ! ; : F-> ( ... -- ... ) FDEPTH DUP ACTUAL-FDEPTH ! START-FDEPTH @ > IF FDEPTH START-FDEPTH @ - 0 DO ACTUAL-FRESULTS I FLOATS + F! LOOP THEN ; : F} ( ... -- ... ) FDEPTH ACTUAL-FDEPTH @ = IF FDEPTH START-FDEPTH @ > IF FDEPTH START-FDEPTH @ - 0 DO ACTUAL-FRESULTS I FLOATS + F@ FCONF= INVERT IF S" INCORRECT FP RESULT: " ERROR LEAVE THEN LOOP THEN ELSE S" WRONG NUMBER OF FP RESULTS: " ERROR THEN ; : F...}T ( -- ) FCURSOR @ START-FDEPTH @ + ACTUAL-FDEPTH @ <> IF S" NUMBER OF FLOAT RESULTS BEFORE '->' DOES NOT MATCH ...}T SPECIFICATION: " ERROR ELSE FDEPTH START-FDEPTH @ = 0= IF S" NUMBER OF FLOAT RESULTS BEFORE AND AFTER '->' DOES NOT MATCH: " ERROR THEN THEN ; : FTESTER ( R -- ) FDEPTH 0= ACTUAL-FDEPTH @ FCURSOR @ START-FDEPTH @ + 1+ < OR IF S" NUMBER OF FLOAT RESULTS AFTER '->' BELOW ...}T SPECIFICATION: " ERROR ELSE ACTUAL-FRESULTS FCURSOR @ FLOATS + F@ FCONF= 0= IF S" INCORRECT FP RESULT: " ERROR THEN THEN 1 FCURSOR +! ; [ELSE] : EMPTY-FSTACK ; : F{ ; : F-> ; : F} ; : F...}T ; HAS-FLOATING [IF] DECIMAL : COMPUTE-CELLS-PER-FP ( -- U ) DEPTH 0E DEPTH 1- >R FDROP R> SWAP - ; HEX COMPUTE-CELLS-PER-FP CONSTANT CELLS-PER-FP : FTESTER ( R -- ) DEPTH CELLS-PER-FP < ACTUAL-DEPTH @ XCURSOR @ START-DEPTH @ + CELLS-PER-FP + < OR IF S" NUMBER OF RESULTS AFTER '->' BELOW ...}T SPECIFICATION: " ERROR EXIT ELSE ACTUAL-RESULTS XCURSOR @ CELLS + F@ FCONF= 0= IF S" INCORRECT FP RESULT: " ERROR THEN THEN CELLS-PER-FP XCURSOR +! ; [THEN] [THEN] : EMPTY-STACK \ ( ... -- ) empty stack; handles underflowed stack too. DEPTH START-DEPTH @ < IF DEPTH START-DEPTH @ SWAP DO 0 LOOP THEN DEPTH START-DEPTH @ > IF DEPTH START-DEPTH @ DO DROP LOOP THEN EMPTY-FSTACK ; : ERROR1 \ ( C-ADDR U -- ) display an error message \ followed by the line that had the error. TYPE SOURCE TYPE CR \ display line corresponding to error EMPTY-STACK \ throw away everything else ; ' ERROR1 ERROR-XT ! : T{ \ ( -- ) syntactic sugar. DEPTH START-DEPTH ! 0 XCURSOR ! F{ ; : -> \ ( ... -- ) record depth and contents of stack. DEPTH DUP ACTUAL-DEPTH ! \ record depth START-DEPTH @ > IF \ if there is something on the stack DEPTH START-DEPTH @ - 0 DO ACTUAL-RESULTS I CELLS + ! LOOP \ save them THEN F-> ; : }T \ ( ... -- ) COMPARE STACK (EXPECTED) CONTENTS WITH SAVED \ (ACTUAL) CONTENTS. DEPTH ACTUAL-DEPTH @ = IF \ if depths match DEPTH START-DEPTH @ > IF \ if there is something on the stack DEPTH START-DEPTH @ - 0 DO \ for each stack item ACTUAL-RESULTS I CELLS + @ \ compare actual with expected <> IF S" INCORRECT RESULT: " ERROR LEAVE THEN LOOP THEN ELSE \ depth mismatch S" WRONG NUMBER OF RESULTS: " ERROR THEN F} ; : ...}T ( -- ) XCURSOR @ START-DEPTH @ + ACTUAL-DEPTH @ <> IF S" NUMBER OF CELL RESULTS BEFORE '->' DOES NOT MATCH ...}T SPECIFICATION: " ERROR ELSE DEPTH START-DEPTH @ = 0= IF S" NUMBER OF CELL RESULTS BEFORE AND AFTER '->' DOES NOT MATCH: " ERROR THEN THEN F...}T ; : XTESTER ( X -- ) DEPTH 0= ACTUAL-DEPTH @ XCURSOR @ START-DEPTH @ + 1+ < OR IF S" NUMBER OF CELL RESULTS AFTER '->' BELOW ...}T SPECIFICATION: " ERROR EXIT ELSE ACTUAL-RESULTS XCURSOR @ CELLS + @ <> IF S" INCORRECT CELL RESULT: " ERROR THEN THEN 1 XCURSOR +! ; : X}T XTESTER ...}T ; : XX}T XTESTER XTESTER ...}T ; : XXX}T XTESTER XTESTER XTESTER ...}T ; : XXXX}T XTESTER XTESTER XTESTER XTESTER ...}T ; HAS-FLOATING [IF] : R}T FTESTER ...}T ; : XR}T FTESTER XTESTER ...}T ; : RX}T XTESTER FTESTER ...}T ; : RR}T FTESTER FTESTER ...}T ; : XXR}T FTESTER XTESTER XTESTER ...}T ; : XRX}T XTESTER FTESTER XTESTER ...}T ; : XRR}T FTESTER FTESTER XTESTER ...}T ; : RXX}T XTESTER XTESTER FTESTER ...}T ; : RXR}T FTESTER XTESTER FTESTER ...}T ; : RRX}T XTESTER FTESTER FTESTER ...}T ; : RRR}T FTESTER FTESTER FTESTER ...}T ; : XXXR}T FTESTER XTESTER XTESTER XTESTER ...}T ; : XXRX}T XTESTER FTESTER XTESTER XTESTER ...}T ; : XXRR}T FTESTER FTESTER XTESTER XTESTER ...}T ; : XRXX}T XTESTER XTESTER FTESTER XTESTER ...}T ; : XRXR}T FTESTER XTESTER FTESTER XTESTER ...}T ; : XRRX}T XTESTER FTESTER FTESTER XTESTER ...}T ; : XRRR}T FTESTER FTESTER FTESTER XTESTER ...}T ; : RXXX}T XTESTER XTESTER XTESTER FTESTER ...}T ; : RXXR}T FTESTER XTESTER XTESTER FTESTER ...}T ; : RXRX}T XTESTER FTESTER XTESTER FTESTER ...}T ; : RXRR}T FTESTER FTESTER XTESTER FTESTER ...}T ; : RRXX}T XTESTER XTESTER FTESTER FTESTER ...}T ; : RRXR}T FTESTER XTESTER FTESTER FTESTER ...}T ; : RRRX}T XTESTER FTESTER FTESTER FTESTER ...}T ; : RRRR}T FTESTER FTESTER FTESTER FTESTER ...}T ; [THEN] \ Set the following flag to TRUE for more verbose output; this may \ allow you to tell which test caused your system to hang. VARIABLE VERBOSE FALSE VERBOSE ! : TESTING \ ( -- ) TALKING COMMENT. SOURCE VERBOSE @ IF DUP >R TYPE CR R> >IN ! ELSE >IN ! DROP THEN ; BASE ! \ end of ttester.fs

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>