Diff for /gforth/prims2x.fs between versions 1.12 and 1.18

version 1.12, 1995/02/02 18:13:10 version 1.18, 1995/12/26 17:35:37
Line 1 Line 1
   \ converts primitives to, e.g., C code 
   
   \ Copyright (C) 1995 Free Software Foundation, Inc.
   
   \ This file is part of Gforth.
   
   \ Gforth is free software; you can redistribute it and/or
   \ modify it under the terms of the GNU General Public License
   \ as published by the Free Software Foundation; either version 2
   \ of the License, or (at your option) any later version.
   
   \ This program is distributed in the hope that it will be useful,
   \ but WITHOUT ANY WARRANTY; without even the implied warranty of
   \ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   \ GNU General Public License for more details.
   
   \ You should have received a copy of the GNU General Public License
   \ along with this program; if not, write to the Free Software
   \ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
   
   
 \ This is not very nice (hard limits, no checking, assumes 1 chars = 1)  \ This is not very nice (hard limits, no checking, assumes 1 chars = 1)
   
 \ Optimizations:  \ Optimizations:
Line 21 Line 42
   
 warnings off  warnings off
   
   require debugging.fs
 [IFUNDEF] vocabulary    include search-order.fs [THEN]  [IFUNDEF] vocabulary    include search-order.fs [THEN]
 [IFUNDEF] environment?  include environ.fs      [THEN]  [IFUNDEF] environment?  include environ.fs      [THEN]
 include gray.fs  include gray.fs
   
 100 constant max-effect \ number of things on one side of a stack effect  100 constant max-effect \ number of things on one side of a stack effect
 4096 constant batch-size \ no meaning, just make sure it's >0  
 255 constant maxchar  255 constant maxchar
 maxchar 1+ constant eof-char  maxchar 1+ constant eof-char
 9 constant tab-char  #tab constant tab-char
 10 constant nl-char  #lf constant nl-char
   
 : read-whole-file ( c-addr1 file-id -- c-addr2 )  : read-whole-file ( c-addr1 file-id -- c-addr2 )
 \ reads the contents of the file file-id puts it into memory at c-addr1  \ reads the contents of the file file-id puts it into memory at c-addr1
 \ c-addr2 is the first address after the file block  \ c-addr2 is the first address after the file block
   begin ( c-addr file-id )    >r dup -1 r> read-file throw + ;
     2dup batch-size swap read-file   
     if  
       true abort" I/O error"  
     endif  
     ( c-addr file-id actual-size ) rot over + -rot  
     batch-size <>  
   until  
   drop ;  
   
 variable input \ pointer to next character to be parsed  variable rawinput \ pointer to next character to be scanned
 variable endinput \ pointer to the end of the input (the char after the last)  variable endrawinput \ pointer to the end of the input (the char after the last)
   variable cookedinput \ pointer to the next char to be parsed
   variable line \ line number of char pointed to by input
   1 line !
   2variable filename \ filename of original input file
   0 0 filename 2!
   variable skipsynclines \ are sync lines ("#line ...") invisible to the parser?
   skipsynclines on 
   
 : start ( -- addr )  : start ( -- addr )
  input @ ;   cookedinput @ ;
   
 : end ( addr -- addr u )  : end ( addr -- addr u )
  input @ over - ;   cookedinput @ over - ;
   
 variable output \ xt ( -- ) of output word  variable output \ xt ( -- ) of output word
   
Line 89  variable effect-in-end ( pointer ) Line 109  variable effect-in-end ( pointer )
 variable effect-out-end ( pointer )  variable effect-out-end ( pointer )
 2variable effect-in-size  2variable effect-in-size
 2variable effect-out-size  2variable effect-out-size
   variable c-line
   2variable c-filename
   variable name-line
   2variable name-filename
   2variable last-name-filename
   
 variable primitive-number -9 primitive-number !  variable primitive-number -10 primitive-number !
   
 \ for several reasons stack items of a word are stored in a wordlist  \ for several reasons stack items of a word are stored in a wordlist
 \ since neither forget nor marker are implemented yet, we make a new  \ since neither forget nor marker are implemented yet, we make a new
Line 110  variable items Line 135  variable items
 eof-char max-member \ the whole character set + EOF  eof-char max-member \ the whole character set + EOF
   
 : getinput ( -- n )  : getinput ( -- n )
  input @   rawinput @ endrawinput @ =
  dup endinput @ =  
  if   if
    drop eof-char     eof-char
  else   else
    c@     cookedinput @ c@
  endif ;   endif ;
   
 :noname ( n -- )  :noname ( n -- )
Line 130  print-token ! Line 154  print-token !
  getinput member? ;   getinput member? ;
 ' testchar? test-vector !  ' testchar? test-vector !
   
   : checksyncline ( -- )
       \ when input points to a newline, check if the next line is a
       \ sync line.  If it is, perform the appropriate actions.
       rawinput @ >r
       s" #line " r@ over compare 0<> if
           rdrop 1 line +! EXIT
       endif
       0. r> 6 chars + 20 >number drop >r drop line ! r> ( c-addr )
       dup c@ bl = if
           char+ dup c@ [char] " <> abort" sync line syntax"
           char+ dup 100 [char] " scan drop swap 2dup - filename 2!
           char+
       endif
       dup c@ nl-char <> abort" sync line syntax"
       skipsynclines @ if
           dup char+ rawinput !
           rawinput @ c@ cookedinput @ c!
       endif
       drop ;
   
 : ?nextchar ( f -- )  : ?nextchar ( f -- )
  ?not? if      ?not? if
    ." syntax error" cr          filename 2@ type ." :" line @ 0 .r ." : syntax error, wrong char:"
    getinput . cr          getinput . cr
    input @ endinput @ over - 100 min type cr          rawinput @ endrawinput @ over - 100 min type cr
    abort          abort
  endif      endif
  input @ endinput @ <> if      rawinput @ endrawinput @ <> if
    1 input +!          rawinput @ c@
  endif ;          1 chars rawinput +!
           1 chars cookedinput +!
           nl-char = if
               checksyncline
           endif
           rawinput @ c@ cookedinput @ c!
       endif ;
   
 : charclass ( set "name" -- )  : charclass ( set "name" -- )
  ['] ?nextchar terminal ;   ['] ?nextchar terminal ;
Line 183  nowhite ++ Line 233  nowhite ++
   
 (( {{ s" " doc 2! s" " forth-code 2! }}  (( {{ s" " doc 2! s" " forth-code 2! }}
    (( comment || nl )) **     (( comment || nl )) **
    (( {{ start }} name {{ end 2dup forth-name 2! c-name 2! }}  tab ++     (( {{ line @ name-line ! filename 2@ name-filename 2! }}
         {{ start }} name {{ end 2dup forth-name 2! c-name 2! }}  tab ++
       {{ start }} stack-effect {{ end stack-string 2! }} tab ++        {{ start }} stack-effect {{ end stack-string 2! }} tab ++
         {{ start }} name {{ end wordset 2! }} tab **          {{ start }} name {{ end wordset 2! }} tab **
         (( {{ start }}  c-name {{ end c-name 2! }} )) ??  nl          (( {{ start }}  c-name {{ end c-name 2! }} )) ??  nl
    ))     ))
    (( ` " ` "  {{ start }} (( noquote ++ ` " )) ++ {{ end 1- doc 2! }} ` " nl )) ??     (( ` " ` "  {{ start }} (( noquote ++ ` " )) ++ {{ end 1- doc 2! }} ` " nl )) ??
    {{ start }} (( nocolonnl nonl **  nl )) ** {{ end c-code 2! }}     {{ skipsynclines off line @ c-line ! filename 2@ c-filename 2! start }} (( nocolonnl nonl **  nl )) ** {{ end c-code 2! skipsynclines on }}
    (( ` :  nl     (( ` :  nl
       {{ start }} (( nonl ++  nl )) ++ {{ end forth-code 2! }}        {{ start }} (( nonl ++  nl )) ++ {{ end forth-code 2! }}
    )) ??     )) ??
Line 205  warnings @ [IF] Line 256  warnings @ [IF]
 : primfilter ( file-id xt -- )  : primfilter ( file-id xt -- )
 \ fileid is for the input file, xt ( -- ) is for the output word  \ fileid is for the input file, xt ( -- ) is for the output word
  output !   output !
  here input !   here dup rawinput ! cookedinput !
  here swap read-whole-file   here swap read-whole-file
  dup endinput !   dup endrawinput !
  here - allot   here - allot
  align   align
    checksyncline
   \ begin
   \     getinput dup eof-char = ?EXIT emit true ?nextchar
   \ again ;
  primitives2something ;   primitives2something ;
   
 \ types  \ types
Line 463  set-current Line 518  set-current
   
 : flush-tos ( -- )  : flush-tos ( -- )
  effect-in-size 2@ effect-out-size 2@   effect-in-size 2@ effect-out-size 2@
  rot - swap rot - ( -f-diff -d-diff ) >r >r  
  effect-in-size 2@ effect-out-size 2@  
  0<> rot 0= and   0<> rot 0= and
  if   if
    ." IF_FTOS(fp[" r@ 0 .r ." ] = FTOS);" cr     ." IF_FTOS(fp[0] = FTOS);" cr
  endif  rdrop   endif
  0<> swap 0= and   0<> swap 0= and
  if   if
    ." IF_TOS(sp[" r@ 0 .r ." ] = TOS);" cr     ." IF_TOS(sp[0] = TOS);" cr
  endif  rdrop ;   endif ;
   
 : fill-tos ( -- )  : fill-tos ( -- )
  effect-in-size 2@ effect-out-size 2@   effect-in-size 2@ effect-out-size 2@
Line 517  set-current Line 570  set-current
 : output-c ( -- )  : output-c ( -- )
  ." I_" c-name 2@ type ." :     /* " forth-name 2@ type ."  ( " stack-string 2@ type ."  ) */" cr   ." I_" c-name 2@ type ." :     /* " forth-name 2@ type ."  ( " stack-string 2@ type ."  ) */" cr
  ." /* " doc 2@ type ."  */" cr   ." /* " doc 2@ type ."  */" cr
    ." NAME(" [char] " emit forth-name 2@ type [char] " emit ." )" cr \ debugging
  ." {" cr   ." {" cr
  ." DEF_CA" cr   ." DEF_CA" cr
  declarations   declarations
  compute-offsets \ for everything else   compute-offsets \ for everything else
    ." NEXT_P0;" cr
    flush-tos
  fetches   fetches
  stack-pointer-updates cr   stack-pointer-updates
  ." NAME(" [char] " emit forth-name 2@ type [char] " emit ." )" cr \ debugging  
  ." {" cr   ." {" cr
    ." #line " c-line @ . [char] " emit c-filename 2@ type [char] " emit cr
  c-code 2@ type   c-code 2@ type
  ." }" cr   ." }" cr
  ." NEXT_P1;" cr   ." NEXT_P1;" cr
  flush-tos  
  stores   stores
  fill-tos   fill-tos
  ." NEXT_P2;" cr   ." NEXT_P2;" cr
Line 553  set-current Line 608  set-current
        -1 primitive-number +!         -1 primitive-number +!
  THEN ;   THEN ;
   
   : output-tag-file ( -- )
       name-filename 2@ last-name-filename 2@ compare if
           name-filename 2@ last-name-filename 2!
           #ff emit cr
           name-filename 2@ type
           ." ,0" cr
       endif ;
   
   : output-tag ( -- )
       output-tag-file
       forth-name 2@ 1+ type
       127 emit
       space forth-name 2@ type space
       1 emit
       name-line @ 0 .r
       ." ,0" cr ;
   
 [IFDEF] documentation  [IFDEF] documentation
 : register-doc ( -- )  : register-doc ( -- )
     get-current documentation set-current      get-current documentation set-current
     forth-name 2@ nextname create      forth-name 2@ nextname create
     forth-name 2@ 2,      forth-name 2@ 2,
     stack-string 2@ 2,      stack-string 2@ condition-stack-effect 2,
     wordset 2@ 2,      wordset 2@ 2,
     c-name 2@ 2,      c-name 2@ condition-pronounciation 2,
     doc 2@ 2,      doc 2@ 2,
     set-current ;      set-current ;
 [THEN]  [THEN]
   
 : process-file ( addr u xt -- )  : process-file ( addr u xt -- )
  >r r/o open-file abort" cannot open file"      >r
  warnings @ if      2dup filename 2!
  ." ------------ CUT HERE -------------" cr  endif      r/o open-file abort" cannot open file"
  r> primfilter ;      warnings @ if
           ." ------------ CUT HERE -------------" cr  endif
       r> primfilter ;
   

Removed from v.1.12  
changed lines
  Added in v.1.18


FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>