1: #Makefile for Gforth
2:
3: #Copyright (C) 1995, 1996 Free Software Foundation, Inc.
4:
5: #This file is part of Gforth.
6:
7: #Gforth is free software; you can redistribute it and/or
8: #modify it under the terms of the GNU General Public License
9: #as published by the Free Software Foundation; either version 2
10: #of the License, or (at your option) any later version.
11:
12: #This program is distributed in the hope that it will be useful,
13: #but WITHOUT ANY WARRANTY; without even the implied warranty of
14: #MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.#See the
15: #GNU General Public License for more details.
16:
17: #You should have received a copy of the GNU General Public License
18: #along with this program; if not, write to the Free Software
19: #Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
20:
21: # To change the values of `make' variables: instead of editing Makefiles,
22: # (1) if the variable is set in `config.status', edit `config.status'
23: # (which will cause the Makefiles to be regenerated when you run `make');
24: # (2) otherwise, pass the desired values on the `make' command line.
25:
26: VERSION =0.2.0#gforth version
27: DOSVERSION=020#gforth version
28: SHELL = /bin/sh
29: RM = rm
30: RMTREE = rm -rf
31: CP = cp
32: TAR = tar cf -
33: INSTALL = @INSTALL@
34: INSTALL_PROGRAM = @INSTALL_PROGRAM@
35: INSTALL_DATA = @INSTALL_DATA@
36: INSTALL_DIR = $(srcdir)/install-sh -d
37: LN_S = @LN_S@
38: GCC = @CC@
39: CC = $(GCC)
40: PATHSEP = @PATHSEP@
41: FORTHPATH = $(libdir)/gforth/site-forth$(PATHSEP)$(datadir)/gforth/site-forth$(PATHSEP)$(libdir)/gforth/$(VERSION)$(PATHSEP)$(datadir)/gforth/$(VERSION)$(PATHSEP).
42: FORTHSIZES = @FORTHSIZES@
43: FORTH = ./gforth -p $(FORTHPATH)$(PATHSEP)$(srcdir)
44: FORTHK = ./gforth -p .$(PATHSEP)$(srcdir) -i ./kernel.fi
45: FORTHP = ./gforth -i ./kernel.fi
46: STRIP = strip
47: TEXI2DVI = texi2dvi
48: DVI2PS = dvips -D300
49: #you can get texi2html from http://asis01.cern.ch/infohtml/texi2html.html
50: TEXI2HTML = texi2html
51: MAKEINFO = makeinfo
52: XCFLAGS = @CFLAGS@
53: XDEFINES = @DEFS@
54: SWITCHES = $(XCFLAGS) $(XDEFINES) #-DNDEBUG #turn off assertions
55: ENGINE_FLAGS = @ENGINE_FLAGS@ -fno-defer-pop -fcaller-saves
56: DEBUGFLAG = @DEBUGFLAG@
57: CFLAGS = $(DEBUGFLAG) -I. -I$(srcdir) -O4 -Wall $(SWITCHES) -DDEFAULTPATH=\"$(FORTHPATH)\"
58:
59: #John Wavrik should use -Xlinker -N to get a writable text (executable)
60: XLDFLAGS = @LDFLAGS@
61: GCCLDFLAGS = @GCCLDFLAGS@
62: LDFLAGS = $(DEBUGFLAG) $(XLDFLAGS) $(GCCLDFLAGS)
63: LDLIBS = @LIBS@
64:
65: VPATH = @srcdir@
66: prefix = @prefix@
67: exec_prefix = @exec_prefix@
68: srcdir = @srcdir@
69: bindir = $(exec_prefix)/bin
70: #read-only architecture-independent files
71: datadir = $(prefix)/share
72: #read-only architecture-dependent non-ascii files
73: libdir = $(prefix)/lib
74: infodir = $(prefix)/info
75: mandir = $(prefix)/man
76: man1dir= $(mandir)/man1
77: man1ext= .1
78: #older emacses have their site-lisp in $(libdir)/emacs/
79: emacssitelispdir=$(datadir)/emacs/site-lisp
80:
81: INCLUDES = forth.h threading.h io.h
82:
83: KERN_SRC = \
84: add.fs \
85: aliases.fs \
86: cross.fs \
87: errore.fs \
88: extend.fs \
89: kernel.fs \
90: main.fs \
91: search-order.fs \
92: special.fs \
93: tools.fs \
94: toolsext.fs \
95: vars.fs
96:
97: GFORTH_FI_SRC = \
98: assert.fs \
99: blockedit.fb \
100: blocks.fs \
101: bufio.fs \
102: debug.fs \
103: debugging.fs \
104: dumpimage.fs \
105: environ.fs \
106: float.fs \
107: glocals.fs \
108: hash.fs \
109: history.fs \
110: intcomp.fs \
111: look.fs \
112: search-order.fs \
113: see.fs \
114: source.fs \
115: startup.fs \
116: struct.fs \
117: stuff.fs \
118: tasker.fs \
119: termsize.fs \
120: vt100.fs \
121: vt100key.fs \
122: wordinfo.fs
123:
124: FORTH_SRC = $(KERN_SRC) $(GFORTH_FI_SRC) \
125: ans-report.fs ansi.fs answords.fs \
126: checkans.fs \
127: code.fs colorize.fs \
128: doskey.fs ds2texi.fs \
129: etags.fs filedump.fs \
130: glosgen.fs gray.fs \
131: makedoc.fs \
132: mach16b.fs mach16l.fs mach32b.fs mach32l.fs mach64b.fs mach64l.fs \
133: more.fs other.fs prims2x.fs random.fs \
134: sieve.fs \
135: site-init.fs \
136: tt.fs sokoban.fs \
137: wordsets.fs \
138: tester.fs coretest.fs postponetest.fs dbltest.fs \
139: bubble.fs siev.fs matrix.fs fib.fs \
140: oof.fs oofsampl.fs objects.fs
141:
142: SOURCES = CVS compat Makefile.in configure.in configure config.sub config.guess \
143: acconfig.h config.h.in stamp-h.in \
144: install-sh INSTALL README ToDo BUGS model COPYING Benchres \
145: gforth.ds texinfo.tex gforth.1 gforth.el \
146: primitives engine.c main.c io.c memcasecmp.c \
147: m68k.h mips.h 386.h hppa.h cache.c sparc.h power.h alpha.h 32bit.h \
148: getopt.c getopt1.c getopt.h select.c \
149: ecvt.c memcmp.c strtol.c strtoul.c ansidecl.h memmove.c pow10.c atanh.c \
150: strerror.c strsignal.c dblsub.c \
151: INSTALL.DOS makefile.dos mkdosmf.sed configure.bat dosconf.h \
152: startup.dos history.dos \
153: configure.cmd mkos2mf.sed os2conf.h makefile.os2 \
154: glosgen.glo glossaries.doc \
155: $(INCLUDES) $(FORTH_SRC)
156:
157: RCS_FILES = ToDo model high-level
158:
159: GEN = gforth version.fs
160:
161: OBJECTS = engine.o io.o main.o memcasecmp.o @LIBOBJS@ @getopt_long@
162:
163: # things that need a working forth system to be generated
164: FORTH_GEN0 = primitives.b primitives.i prim_labels.i aliases.fs
165: FORTH_GEN = $(FORTH_GEN0) @KERNEL@ gforth.fi
166: # this is used for antidependences,
167: FORTH_GEN1 = $(FORTH_GEN0) @kernel_fi@
168:
169: #distributed documentation
170: DOCDIST = gforth.info* gforth.ps
171:
172: #stuff in a binonly distribution
173: BINONLYDIST = config.status Makefile gforth $(OBJECTS) \
174: machine.h config.h kernel.fi stamp-h version.h version.fs \
175: INSTALL.BINDIST
176:
177: KERNLS = kernl16b.fi- kernl16l.fi- \
178: kernl32b.fi- kernl32l.fi- \
179: kernl64b.fi- kernl64l.fi-
180:
181: GEN_PRECIOUS = $(FORTH_GEN) $(KERNLS) gforth.texi gforth.dvi gforth.ps Makefile configure
182:
183: #standards.info recommends this:
184: .SUFFIXES:
185: .SUFFIXES: .c .o
186:
187: all: version.fs more
188:
189: version.h: Makefile.in
190: echo "static char gforth_version[]=\"$(VERSION)\" ;" >$@
191:
192: version.fs: Makefile.in
193: $(MAKE) gforth
194: echo ": version-string s\" $(VERSION)\" ;" >$@
195:
196: more: $(FORTH_GEN) gforth
197:
198: #from the gcc Makefile:
199: #"Deletion of files made during compilation.
200: # There are four levels of this:
201: # `mostlyclean', `clean', `distclean' and `realclean'.
202: # `mostlyclean' is useful while working on a particular type of machine.
203: # It deletes most, but not all, of the files made by compilation.
204: # It does not delete libgcc.a or its parts, so it won't have to be recompiled.
205: # `clean' deletes everything made by running `make all'.
206: # `distclean' also deletes the files made by config.
207: # `realclean' also deletes everything that could be regenerated automatically."
208:
209: mostlyclean:
210: -$(RM) -rf *.s gforth.fi *.fi~ *.fi- version.fs *TAGS \
211: crossdoc.fd doc.fd gforth.texi gforth.fns gforth.aux gforth.cp gforth.cps \
212: gforth.dvi gforth.fn gforth.ky gforth.log gforth.pg \
213: gforth.toc gforth.tp gforth.vr html gforth-$(VERSION).tar.gz \
214: version.h
215:
216: clean: mostlyclean
217: -$(RM) -rf $(GEN) *.o
218:
219: distclean: clean
220: -$(RM) machine.h kernel.fi config.cache config.log \
221: config.status config.h Makefile stamp-h
222:
223: #realclean is useless, but dangerous, so it's commented out
224: #realclean: distclean
225: # -$(RM) $(GEN_PRECIOUS)
226:
227: #mostlyclean, but also remove some of the stuff that is distributed
228: virtualclean: mostlyclean
229: -$(RM) -rf gforth.fns gforth.texi gforth.ps gforth.info* \
230: gforth-$(VERSION).tar.gz config.cache *~ */*~
231:
232: #use dist targets only when srcdir=.
233: dist: $(SOURCES) $(FORTH_GEN0) @KERNEL@ $(DOCDIST)
234: -$(RMTREE) gforth-$(VERSION)
235: mkdir gforth-$(VERSION)
236: $(CP) -rp $(SOURCES) $(FORTH_GEN0) @KERNEL@ $(DOCDIST) gforth-$(VERSION)
237: $(TAR) gforth-$(VERSION)|gzip -9 >gforth-$(VERSION).tar.gz
238: -$(RMTREE) gforth-$(VERSION)
239:
240: #use dist targets only when srcdir=.
241: dosdist: $(SOURCES) $(FORTH_GEN0) @KERNEL@ $(DOCDIST)
242: -$(RMTREE) gforth.$(DOSVERSION)
243: mkdir gforth.$(DOSVERSION)
244: $(CP) -rp $(SOURCES) $(FORTH_GEN0) @KERNEL@ $(DOCDIST) gforth.$(DOSVERSION)
245: zip -r9 gforth.zip gforth.$(DOSVERSION)/*
246: -$(RMTREE) gforth.$(DOSVERSION)
247:
248: #A source distribution contains only the things needed to install gforth,
249: #without the documents.
250: srcdist: $(SOURCES) $(FORTH_GEN0) @KERNEL@
251: -$(RMTREE) gforth-$(VERSION)
252: mkdir gforth-$(VERSION)
253: $(CP) -rp $(SOURCES) $(FORTH_GEN0) @KERNEL@ gforth-$(VERSION)
254: $(TAR) gforth-$(VERSION)|gzip -9 >gforth-src-$(VERSION).tar.gz
255: -$(RMTREE) gforth-$(VERSION)
256:
257: #A document distribution contains only the documents, which can be created
258: #with MAKE.
259: docdist: $(DOCDIST)
260: -$(RMTREE) gforth-$(VERSION)
261: mkdir gforth-$(VERSION)
262: $(CP) -rp $(DOCDIST) gforth-$(VERSION)
263: $(TAR) gforth-$(VERSION)|gzip -9 >gforth-doc-$(VERSION).tar.gz
264: -$(RMTREE) gforth-$(VERSION)
265:
266: #a binary distribution contains the complete source distribution,
267: # the objects, the executable and the links. the objects are there for making
268: # make happy.
269: bindist: $(SOURCES) $(FORTH_GEN0) @KERNEL@ $(DOCDIST) $(BINONLYDIST)
270: -$(RMTREE) gforth-$(VERSION)
271: mkdir gforth-$(VERSION)
272: $(CP) -rp -d $(SOURCES) $(FORTH_GEN0) @KERNEL@ $(DOCDIST) $(BINONLYDIST) gforth-$(VERSION)
273: strip gforth-$(VERSION)/gforth
274: $(TAR) gforth-$(VERSION)|gzip -9 >gforth-$(VERSION)-@host@.tar.gz
275:
276: #makes a package with only the stuff not present in the source
277: #package. For installation the source package is still needed!
278: #This is useful if you want to distribute many binary versions in
279: #little space (e.g., on floppy disk): Put the source package and
280: #all the binonly packages you are interested in on the disk. The user
281: #then just has to unpack the source and his favourite binonly into the
282: #same directory and has a full binary distribution.
283: binonlydist: $(SOURCES) $(FORTH_GEN0) @KERNEL@ $(DOCDIST) $(BINONLYDIST)
284: -$(RMTREE) gforth-$(VERSION)
285: mkdir gforth-$(VERSION)
286: $(CP) -p -d $(BINONLYDIST) gforth-$(VERSION)
287: strip gforth-$(VERSION)/gforth
288: $(TAR) gforth-$(VERSION)|gzip -9 >gforth-$(VERSION)-binonly-@host@.tar.gz
289:
290:
291: #strip gforth, because the debugging stuff is hardly useful once
292: # gforth manages to execute more than a few primitives
293:
294: #install does not depend on gforth.info, because that would require
295: #supplying a lot of files that can be easily generated (only info is
296: #hard to generate)
297: install: gforth $(FORTH_SRC) kernel.fi gforth.fi gforth.1 primitives gforth.TAGS
298: for i in $(bindir) $(mandir) $(infodir) $(libdir)/gforth/$(VERSION) $(datadir)/gforth/$(VERSION) $(libdir)/gforth/site-forth $(datadir)/gforth/site-forth; do \
299: $(INSTALL_DIR) $$i; \
300: done
301: touch $(datadir)/gforth/site-forth/site-init.fs
302: -$(RM) $(bindir)/gforth $(bindir)/gforth-$(VERSION)
303: $(INSTALL_PROGRAM) -s gforth $(bindir)
304: ln $(bindir)/gforth $(bindir)/gforth-$(VERSION)
305: $(INSTALL_DATA) $(srcdir)/gforth.1 $(mandir)
306: for i in $(srcdir)/gforth.info*; do $(INSTALL_DATA) $$i $(infodir); done
307: for i in $(FORTH_SRC) primitives; do \
308: $(INSTALL_DATA) $(srcdir)/$$i $(datadir)/gforth/$(VERSION); \
309: done
310: $(INSTALL_DATA) kernel.fi $(libdir)/gforth/$(VERSION)
311: $(FORTHP) $(FORTHSIZES) startup.fs -e "savesystem $(libdir)/gforth/$(VERSION)/gforth.fi bye" #gforth.fi contains some path names
312: sed s:$(srcdir)/:$(datadir)/gforth/$(VERSION)/: gforth.TAGS >TAGS; $(INSTALL_DATA) TAGS $(datadir)/gforth/$(VERSION)
313: if test -d $(emacssitelispdir); then \
314: $(INSTALL_DATA) $(srcdir)/gforth.el $(emacssitelispdir); \
315: else \
316: echo ">>>>>Please install $(srcdir)/gforth.el in your .../emacs/site-lisp directory"; \
317: fi
318: echo ">>>>> Please make an entry for Gforth in your info dir file; e.g.:"; \
319: echo "* Gforth: (gforth). A fast interpreter for the Forth language."
320:
321: install-strip: install
322:
323: #deinstall all files specific to this version of gforth
324: #to uninstall version foo, type `make uninstall VERSION=foo'
325: uninstall:
326: -$(RM) -rf $(libdir)/gforth/$(VERSION) $(datadir)/gforth/$(VERSION) $(bindir)/gforth-$(VERSION)
327: @echo -e "Type\n$(RM) -rf $(bindir)/gforth $(mandir)/gforth.1 $(infodir)/gforth.info* $(datadir)/gforth $(libdir)/gforth\nto remove Gforth completely"
328:
329: check test: gforth gforth.fi
330: $(FORTH) tester.fs coretest.fs postponetest.fs dbltest.fs -e bye
331: $(FORTH) code.fs checkans.fs -e bye
332: @echo 'Expect no differences'
333: $(FORTH) prims2x.fs -e "s\" $(srcdir)/primitives.b\" ' output-c process-file bye"| diff -c - $(srcdir)/primitives.i
334:
335: bench: gforth gforth.fi
336: @echo 'Each benchmark takes about 30s on a 486-66 (gcc-2.6.3 -DFORCE_REG)'
337: time $(FORTH) siev.fs -e "main bye"
338: time $(FORTH) bubble.fs -e "main bye"
339: time $(FORTH) -m 160000 matrix.fs -e "main bye"
340: time $(FORTH) fib.fs -e "main bye"
341:
342: dvi: gforth.dvi
343:
344: gforth: $(OBJECTS)
345: -$(CP) gforth gforth~
346: $(GCC) $(LDFLAGS) $(OBJECTS) $(LDLIBS) -o $@
347: @MAKE_EXE@
348:
349: kernl16l.fi-: $(KERN_SRC) version.fs mach16l.fs $(FORTH_GEN0)
350: $(FORTHK) -e 's" mach16l.fs"' main.fs -e "save-cross kernl16l.fi- $(bindir)/gforth-$(VERSION) bye"
351:
352: kernl16b.fi-: $(KERN_SRC) version.fs mach16b.fs $(FORTH_GEN0)
353: $(FORTHK) -e 's" mach16b.fs"' main.fs -e "save-cross kernl16b.fi- $(bindir)/gforth-$(VERSION) bye"
354:
355: kernl32l.fi-: $(KERN_SRC) version.fs mach32l.fs $(FORTH_GEN0)
356: $(FORTHK) -e 's" mach32l.fs"' main.fs -e "save-cross kernl32l.fi- $(bindir)/gforth-$(VERSION) bye"
357:
358: kernl32b.fi-: $(KERN_SRC) version.fs mach32b.fs $(FORTH_GEN0)
359: $(FORTHK) -e 's" mach32b.fs"' main.fs -e "save-cross kernl32b.fi- $(bindir)/gforth-$(VERSION) bye"
360:
361: kernl64l.fi-: $(KERN_SRC) version.fs mach64l.fs $(FORTH_GEN0)
362: $(FORTHK) -e 's" mach64l.fs"' main.fs -e "save-cross kernl64l.fi- $(bindir)/gforth-$(VERSION) bye"
363:
364: kernl64b.fi-: $(KERN_SRC) version.fs mach64b.fs $(FORTH_GEN0)
365: $(FORTHK) -e 's" mach64b.fs"' main.fs -e "save-cross kernl64b.fi- $(bindir)/gforth-$(VERSION) bye"
366:
367: kernl16b.fi: $(KERNLS)
368: -$(CP) kernl16b.fi kernl16b.fi~
369: -$(CP) kernl16b.fi- kernl16b.fi
370: @LINK_KERNL16B@
371:
372: kernl16l.fi: $(KERNLS)
373: -$(CP) kernl16l.fi kernl16l.fi~
374: -$(CP) kernl16l.fi- kernl16l.fi
375: @LINK_KERNL16L@
376:
377: kernl32b.fi: $(KERNLS)
378: -$(CP) kernl32b.fi kernl32b.fi~
379: -$(CP) kernl32b.fi- kernl32b.fi
380: @LINK_KERNL32B@
381:
382: kernl32l.fi: $(KERNLS)
383: -$(CP) kernl32l.fi kernl32l.fi~
384: -$(CP) kernl32l.fi- kernl32l.fi
385: @LINK_KERNL32L@
386:
387: kernl64b.fi: $(KERNLS)
388: -$(CP) kernl64b.fi kernl64b.fi~
389: -$(CP) kernl64b.fi- kernl64b.fi
390: @LINK_KERNL64B@
391:
392: kernl64l.fi: $(KERNLS)
393: -$(CP) kernl64l.fi kernl64l.fi~
394: -$(CP) kernl64l.fi- kernl64l.fi
395: @LINK_KERNL64L@
396:
397: gforth.fi: @kernel_fi@ gforth $(GFORTH_FI_SRC)
398: $(FORTHK) $(FORTHSIZES) startup.fs -e "savesystem gforth.fi bye"
399:
400: #TAGS is a GNU standard target
401: TAGS: gforth.TAGS
402: $(CP) gforth.TAGS $@
403:
404: gforth.TAGS: @kernel_fi@ gforth $(GFORTH_FI_SRC) primitives.TAGS
405: $(FORTHK) etags.fs startup.fs -e bye
406: cat TAGS primitives.TAGS kernel.TAGS >gforth.TAGS
407: rm TAGS
408:
409: engine.s: engine.c primitives.i prim_labels.i machine.h threading.h $(INCLUDES) config.h
410: $(GCC) $(CFLAGS) $(ENGINE_FLAGS) -S $(srcdir)/engine.c
411:
412: engine.o: engine.c primitives.i prim_labels.i machine.h threading.h $(INCLUDES) config.h
413: $(GCC) $(CFLAGS) $(ENGINE_FLAGS) -c $(srcdir)/engine.c
414:
415: main.o: main.c machine.h threading.h $(INCLUDES) config.h version.h
416: $(GCC) $(CFLAGS) $(ENGINE_FLAGS) -c $(srcdir)/main.c
417:
418: strtoul.o: strtoul.c strtol.c
419:
420: primitives.b: primitives
421: m4 -s $(srcdir)/primitives >$@
422:
423: primitives.i : primitives.b prims2x.fs
424: $(FORTHK) prims2x.fs -e "s\" primitives.b\" ' output-c process-file bye" >$@
425:
426: prim_labels.i : primitives.b prims2x.fs
427: $(FORTHK) prims2x.fs -e "s\" primitives.b\" ' output-label process-file bye" >$@
428:
429: aliases.fs: primitives.b prims2x.fs
430: $(FORTHK) prims2x.fs -e "s\" primitives.b\" ' output-alias process-file bye" >$@
431:
432: primitives.fs: primitives.b prims2x.fs
433: $(FORTHK) prims2x.fs -e "s\" primitives.b\" ' output-forth process-file bye" >$@
434:
435: primitives.TAGS: primitives.b prims2x.fs
436: $(FORTHK) prims2x.fs -e "s\" $(srcdir)/primitives.b\" ' output-tag process-file bye" >$@
437:
438: doc.fd: makedoc.fs float.fs search-order.fs glocals.fs environ.fs \
439: toolsext.fs wordinfo.fs \
440: vt100.fs colorize.fs see.fs bufio.fs debug.fs history.fs \
441: doskey.fs vt100key.fs startup.fs assert.fs debugging.fs code.fs
442: $(FORTHK) -e "s\" doc.fd\"" makedoc.fs startup.fs code.fs -e bye
443:
444: crossdoc.fd: $(KERN_SRC) version.fs $(FORTH_GEN0)
445: $(FORTHK) -e 's" mach32l.fs"' main.fs -e bye
446:
447: gforth.texi: gforth.ds primitives.b ds2texi.fs prims2x.fs doc.fd crossdoc.fd
448: $(FORTHK) -m 100000 ds2texi.fs prims2x.fs -e "s\" $(srcdir)/primitives.b\" ' register-doc process-file" crossdoc.fd doc.fd -e "s\" $(srcdir)/gforth.ds\" r/o open-file throw ds2texi bye" >$@
449:
450: checkdoc: gforth.ds primitives.b ds2texi.fs prims2x.fs doc.fd crossdoc.fd answords.fs
451: $(FORTHK) ds2texi.fs answords.fs -e bye
452:
453: dvi: gforth.dvi
454:
455: gforth.dvi gforth.fns: gforth.texi
456: $(TEXI2DVI) gforth.texi
457:
458: gforth.ps: gforth.dvi
459: $(DVI2PS) gforth.dvi -o $@
460:
461: info: gforth.info
462:
463: gforth.info: gforth.texi
464: -$(MAKEINFO) gforth.texi
465:
466: html: gforth.texi
467: -$(RM) html/*
468: -mkdir html
469: cd html; $(TEXI2HTML) -menu -split_node ../gforth.texi
470:
471: doc: gforth.ps html
472:
473: # For an explanation of the following Makefile rules, see node
474: # `Automatic Remaking' in GNU Autoconf documentation.
475: $(srcdir)/configure: configure.in
476: cd $(srcdir) && autoconf
477:
478: # autoheader might not change config.h.in, so touch a stamp file.
479: $(srcdir)/config.h.in: stamp-h.in
480: $(srcdir)/stamp-h.in: configure.in acconfig.h
481: cd $(srcdir) && autoheader
482: echo timestamp > $(srcdir)/stamp-h.in
483:
484: config.h: stamp-h
485: stamp-h: config.h.in config.status
486: CONFIG_FILES=$@ CONFIG_HEADERS=config.h ./config.status
487: echo > stamp-h
488: Makefile: Makefile.in config.status
489: CONFIG_FILES=$@ CONFIG_HEADERS=config.h ./config.status
490:
491: config.status: configure
492: ./config.status --recheck
493:
494:
495: #create files for DOS, because DOS cannot do it itself
496: makefile.dos: mkdosmf.sed Makefile.in
497: sed -f mkdosmf.sed <Makefile.in >makefile.dos
498:
499: makefile.os2: mkos2mf.sed Makefile.in
500: sed -f mkos2mf.sed <Makefile.in >makefile.os2
501: echo '%.o: %.c' >>makefile.os2
502: echo ' $$(GCC) $$(CFLAGS) -c $$<' >>makefile.os2
503:
504: history.dos: history.fs Makefile.in
505: sed -e "s,~/\.gforth-history,/gforth.his,g" <history.fs >history.dos
506:
507: startup.dos: startup.fs Makefile.in
508: sed -e "s/\\\\ include doskey/include doskey/g" \
509: -e "s/include vt100key/\\\\ include vt100key/g" <startup.fs >startup.dos
510:
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>