1: #Makefile for Gforth
2:
3: #Copyright (C) 1995-1997 Free Software Foundation, Inc.
4:
5: #This file is part of Gforth.
6:
7: #Gforth is free software; you can redistribute it and/or
8: #modify it under the terms of the GNU General Public License
9: #as published by the Free Software Foundation; either version 2
10: #of the License, or (at your option) any later version.
11:
12: #This program is distributed in the hope that it will be useful,
13: #but WITHOUT ANY WARRANTY; without even the implied warranty of
14: #MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.#See the
15: #GNU General Public License for more details.
16:
17: #You should have received a copy of the GNU General Public License
18: #along with this program; if not, write to the Free Software
19: #Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
20:
21: # To change the values of `make' variables: instead of editing Makefiles,
22: # (1) if the variable is set in `config.status', edit `config.status'
23: # (which will cause the Makefiles to be regenerated when you run `make');
24: # (2) otherwise, pass the desired values on the `make' command line.
25:
26: #gforth version
27: VERSION_MAJOR=0
28: VERSION_MINOR=3
29: VERSION_RELEASE=1
30: VERSION =$(VERSION_MAJOR).$(VERSION_MINOR).$(VERSION_RELEASE)
31: DOSVERSION=$(VERSION_MAJOR)$(VERSION_MINOR)$(VERSION_RELEASE)
32: SHELL = /bin/sh
33: RM = rm
34: RMTREE = rm -rf
35: CP = cp
36: TAR = tar cf -
37: INSTALL = @INSTALL@
38: INSTALL_PROGRAM = @INSTALL_PROGRAM@
39: INSTALL_DATA = @INSTALL_DATA@
40: LN_S = @LN_S@
41: GCC = @CC@
42: CC = $(GCC)
43: PATHSEP = @PATHSEP@
44: FORTHPATH = $(libdir)/gforth/site-forth$(PATHSEP)$(datadir)/gforth/site-forth$(PATHSEP)$(libdir)/gforth/$(VERSION)$(PATHSEP)$(datadir)/gforth/$(VERSION)$(PATHSEP).
45: FORTHSIZES = @FORTHSIZES@
46: FORTH = ./gforth -p $(FORTHPATH)$(PATHSEP)$(srcdir)
47: FORTHKFLAGS= -p .$(PATHSEP)$(srcdir) -i ./kernel.fi
48: FORTHK = ./gforth $(FORTHKFLAGS)
49: FORTHP = ./gforth -i ./kernel.fi
50: STRIP = strip
51: TEXI2DVI = texi2dvi
52: DVI2PS = dvips -D300
53: #you can get texi2html from http://wwwcn.cern.ch/dci/texi2html/
54: TEXI2HTML = texi2html
55: MAKEINFO = makeinfo
56: XCFLAGS = @CFLAGS@
57: XDEFINES = @DEFS@
58: SWITCHES = $(XCFLAGS) $(XDEFINES) #-DNDEBUG #turn off assertions
59: ENGINE_FLAGS = @ENGINE_FLAGS@ -fno-defer-pop -fcaller-saves
60: DEBUGFLAG = @DEBUGFLAG@
61: CFLAGS = $(DEBUGFLAG) -I$(srcdir)/engine -I$(srcdir) -O4 -Wall $(SWITCHES) -DDEFAULTPATH=\"$(FORTHPATH)\"
62:
63: #John Wavrik should use -Xlinker -N to get a writable text (executable)
64: XLDFLAGS = @LDFLAGS@
65: GCCLDFLAGS = @GCCLDFLAGS@
66: LDFLAGS = $(DEBUGFLAG) $(XLDFLAGS) $(GCCLDFLAGS)
67: LDLIBS = @LIBS@
68:
69: VPATH = @srcdir@
70: prefix = @prefix@
71: exec_prefix = @exec_prefix@
72: srcdir = @srcdir@
73: bindir = $(exec_prefix)/bin
74: #read-only architecture-independent files
75: datadir = $(prefix)/share
76: #read-only architecture-dependent non-ascii files
77: libdir = $(prefix)/lib
78: infodir = $(prefix)/info
79: mandir = $(prefix)/man
80: man1dir= $(mandir)/man1
81: man1ext= .1
82: #older emacses have their site-lisp in $(libdir)/emacs/
83: emacssitelispdir=$(datadir)/emacs/site-lisp
84:
85: INCLUDES = engine/CVS engine/forth.h engine/threaded.h engine/io.h
86:
87: KERN_SRC = \
88: kernel/CVS \
89: kernel/aliases0.fs \
90: kernel/aliases.fs \
91: kernel/args.fs \
92: kernel/cond.fs \
93: kernel/cond-old.fs \
94: cross.fs \
95: kernel/errore.fs \
96: kernel/files.fs \
97: kernel/require.fs \
98: kernel/paths.fs \
99: kernel/kernel.fs \
100: kernel/main.fs \
101: kernel/prim0.fs \
102: search.fs \
103: kernel/special.fs \
104: kernel/tools.fs \
105: kernel/toolsext.fs \
106: kernel/vars.fs \
107: kernel/accept.fs \
108: kernel/basics.fs \
109: kernel/interp.fs \
110: kernel/io.fs \
111: kernel/license.fs \
112: kernel/nio.fs \
113: kernel/saccept.fs
114:
115: GFORTH_FI_SRC = \
116: assert.fs \
117: blocked.fb \
118: blocks.fs \
119: bufio.fs \
120: debug.fs \
121: debugs.fs \
122: savesys.fs \
123: environ.fs \
124: errors.fs \
125: extend.fs \
126: float.fs \
127: glocals.fs \
128: hash.fs \
129: history.fs \
130: intcomp.fs \
131: look.fs \
132: search.fs \
133: see.fs \
134: see-ext.fs \
135: source.fs \
136: startup.fs \
137: struct.fs \
138: stuff.fs \
139: tasker.fs \
140: termsize.fs \
141: vt100.fs \
142: vt100key.fs \
143: wordinfo.fs
144:
145: FORTH_SRC = $(KERN_SRC) $(GFORTH_FI_SRC) \
146: ans-report.fs ansi.fs answords.fs \
147: code.fs colorize.fs comp-i.fs \
148: doskey.fs ds2texi.fs \
149: etags.fs filedump.fs \
150: glosgen.fs gray.fs \
151: doc/makedoc.fs \
152: mach16b.fs mach16l.fs mach32b.fs mach32l.fs mach64b.fs mach64l.fs \
153: more.fs other.fs prims2x.fs random.fs \
154: siteinit.fs \
155: tt.fs sokoban.fs \
156: wordsets.fs \
157: test/tester.fs test/coretest.fs test/postpone.fs test/dbltest.fs \
158: test/other.fs test/checkans.fs test/CVS \
159: bubble.fs siev.fs matrix.fs fib.fs \
160: oof.fs oofsampl.fs objects.fs
161:
162: COMPAT = compat/CVS compat/README compat/control.fs compat/anslocal.fs \
163: compat/struct.fs compat/loops.fs
164:
165: ALLSUBDIRS = engine
166:
167: SOURCES = CVS compat Makefile.in engine/Makefile.in gforthmi \
168: configure.in configure config.sub config.guess \
169: acconfig.h engine/config.h.in stamp-h.in \
170: install-sh INSTALL README ToDo BUGS model COPYING Benchres \
171: doc/gforth.ds doc/texinfo.tex doc/gforth.1 gforth.el \
172: prim engine/engine.c engine/main.c engine/io.c engine/memcmpc.c \
173: arch/m68k/machine.h arch/mips/machine.h arch/386/machine.h \
174: arch/hppa/machine.h arch/sparc/machine.h arch/power/machine.h \
175: arch/alpha/machine.h \
176: engine/cache.c engine/32bit.h \
177: engine/getopt.c engine/getopt1.c engine/getopt.h engine/select.c \
178: engine/ecvt.c engine/memcmp.c engine/strtol.c engine/strtoul.c \
179: engine/ansidecl.h engine/memmove.c \
180: engine/pow10.c engine/atanh.c \
181: engine/strerror.c engine/strsignal.c engine/strsig.c engine/dblsub.c \
182: INSTALL.DOS makefile.dos engine/makefile.dos mkdosmf.sed config.bat \
183: dosconf.h gforthmi.bat startup.dos history.dos mkinstalldirs \
184: configure.cmd mkos2mf.sed os2conf.h makefile.os2 engine/makefile.os2 \
185: gforthmi.cmd glosgen.glo doc/glossaries.doc \
186: $(INCLUDES) $(FORTH_SRC) $(COMPAT)
187:
188: RCS_FILES = ToDo model high-level
189:
190: GEN = gforth gforth-ditc kernel/version.fs version-stamp
191:
192: OBJECTS0 = engine/replace.a
193: OBJECTS = engine/engine.o engine/main.o
194: OBJECTS_DITC = engine/engine-ditc.o engine/main-ditc.o
195:
196: # things that need a working forth system to be generated
197: FORTH_GEN0 = prim.b engine/prim.i engine/prim_lab.i kernel/aliases.fs kernel/prim.fs
198: FORTH_GEN = $(FORTH_GEN0) @KERNEL@ gforth.fi
199: # this is used for antidependences,
200: FORTH_GEN1 = $(FORTH_GEN0) @kernel_fi@
201:
202: #distributed documentation
203: DOCDIST = doc/gforth.info doc/gforth.info-* doc/gforth.ps
204:
205: #stuff in a binonly distribution
206: BINONLYDIST = config.status Makefile gforth gforth-ditc \
207: $(OBJECTS0) $(OBJECTS) $(OBJECTS_DITC)\
208: machine/machine.h engine/config.h kernel.fi \
209: stamp-h engine/version.h kernel/version.fs version-stamp \
210: INSTALL.BINDIST
211:
212: KERNLS = kernl16b.fi- kernl16l.fi- \
213: kernl32b.fi- kernl32l.fi- \
214: kernl64b.fi- kernl64l.fi-
215:
216: GEN_PRECIOUS = $(FORTH_GEN) $(KERNLS) doc/gforth.texi doc/gforth.dvi doc/gforth.ps Makefile configure
217:
218: #standards.info recommends this:
219: .SUFFIXES:
220: .SUFFIXES: .c .o
221:
222: all: kernel/version.fs more
223:
224: #this rule avoids remaking everything after minor changes in Makefile.in
225: version: Makefile.in
226: if test -r $@ && test x'$(VERSION)' = x`cat $@` ; then true ; else echo $(VERSION) > $@ ; fi
227:
228: engine/version.h: version
229: echo "static char gforth_version[]=\"$(VERSION)\" ;" >$@
230:
231: kernel/version.fs: version
232: $(MAKE) gforth
233: echo ": version-string s\" $(VERSION)\" ;" >$@
234:
235: more: $(OBJECTS) $(FORTH_GEN) gforth
236:
237: #from the gcc Makefile:
238: #"Deletion of files made during compilation.
239: # There are four levels of this:
240: # `mostlyclean', `clean', `distclean' and `realclean'.
241: # `mostlyclean' is useful while working on a particular type of machine.
242: # It deletes most, but not all, of the files made by compilation.
243: # It does not delete libgcc.a or its parts, so it won't have to be recompiled.
244: # `clean' deletes everything made by running `make all'.
245: # `distclean' also deletes the files made by config.
246: # `realclean' also deletes everything that could be regenerated automatically."
247:
248: mostlyclean:
249: -$(RM) -rf *.s gforth.fi *.fi~ *.fi- kernel/version.fs *TAGS \
250: doc/crossdoc.fd doc/doc.fd doc/gforth.texi doc/gforth.fns \
251: doc/gforth.aux doc/gforth.cp doc/gforth.cps \
252: doc/gforth.dvi doc/gforth.fn doc/gforth.ky doc/gforth.log \
253: doc/gforth.pg \
254: doc/gforth.toc doc/gforth.tp doc/gforth.vr html \
255: gforth-$(VERSION).tar.gz \
256: engine/version.h
257:
258: clean: mostlyclean
259: -$(RM) -rf $(GEN) *.o engine/*.o engine/*.a
260:
261: distclean: clean
262: -$(RM) machine/machine.h kernel.fi config.cache config.log \
263: config.status engine/config.h Makefile stamp-h
264:
265: #realclean is useless, but dangerous, so it's commented out
266: #realclean: distclean
267: # -$(RM) $(GEN_PRECIOUS)
268:
269: #mostlyclean, but also remove some of the stuff that is distributed
270: virtualclean: mostlyclean
271: -$(RM) -rf gforth.fns gforth.texi gforth.ps gforth.info* \
272: gforth-$(VERSION).tar.gz config.cache *~ */*~
273:
274: #use dist targets only when srcdir=.
275: dist: $(SOURCES) $(FORTH_GEN0) @KERNEL@ $(DOCDIST)
276: -$(RMTREE) gforth-$(VERSION)
277: mkdir gforth-$(VERSION)
278: $(TAR) $(SOURCES) $(FORTH_GEN0) @KERNEL@ $(DOCDIST) | \
279: (cd gforth-$(VERSION); tar xf -)
280: $(TAR) gforth-$(VERSION)|gzip -9 >gforth-$(VERSION).tar.gz
281: -$(RMTREE) gforth-$(VERSION)
282:
283: #use dist targets only when srcdir=.
284: dosdist: $(SOURCES) $(FORTH_GEN0) @KERNEL@ $(DOCDIST)
285: -$(RMTREE) gforth.$(DOSVERSION)
286: mkdir gforth.$(DOSVERSION)
287: $(TAR) $(SOURCES) $(FORTH_GEN0) @KERNEL@ $(DOCDIST) | \
288: (cd gforth.$(DOSVERSION); tar xf -)
289: zip -r9 gf$(DOSVERSION)dos.zip gforth.$(DOSVERSION)/*
290: -$(RMTREE) gforth.$(DOSVERSION)
291:
292: #A source distribution contains only the things needed to install gforth,
293: #without the documents.
294: srcdist: $(SOURCES) $(FORTH_GEN0) @KERNEL@
295: -$(RMTREE) gforth-$(VERSION)
296: mkdir gforth-$(VERSION)
297: $(TAR) $(SOURCES) $(FORTH_GEN0) @KERNEL@ | \
298: (cd gforth-$(VERSION); tar xf -)
299: $(TAR) gforth-$(VERSION)|gzip -9 >gforth-src-$(VERSION).tar.gz
300: -$(RMTREE) gforth-$(VERSION)
301:
302: srconlydist: $(SOURCES)
303: -$(RMTREE) gforth-$(VERSION)
304: mkdir gforth-$(VERSION)
305: $(TAR) $(SOURCES) | \
306: (cd gforth-$(VERSION); tar xf -)
307: $(TAR) gforth-$(VERSION)|gzip -9 >gforth-srconly-$(VERSION).tar.gz
308: -$(RMTREE) gforth-$(VERSION)
309:
310: #A document distribution contains only the documents, which can be created
311: #with MAKE.
312: docdist: $(DOCDIST)
313: -$(RMTREE) gforth-$(VERSION)
314: mkdir gforth-$(VERSION)
315: $(TAR) $(DOCDIST) | (cd gforth-$(VERSION); tar xf -)
316: $(TAR) gforth-$(VERSION)|gzip -9 >gforth-doc-$(VERSION).tar.gz
317: -$(RMTREE) gforth-$(VERSION)
318:
319: #a binary distribution contains the complete source distribution,
320: # the objects, the executable and the links. the objects are there for making
321: # make happy.
322: bindist: $(SOURCES) $(FORTH_GEN0) @KERNEL@ $(DOCDIST) $(BINONLYDIST)
323: -$(RMTREE) gforth-$(VERSION)
324: mkdir gforth-$(VERSION)
325: $(TAR) $(SOURCES) $(FORTH_GEN0) @KERNEL@ $(DOCDIST) $(BINONLYDIST) | (cd gforth-$(VERSION); tar xf -)
326: strip gforth-$(VERSION)/gforth
327: $(TAR) gforth-$(VERSION)|gzip -9 >gforth-$(VERSION)-@host@.tar.gz
328:
329: #makes a package with only the stuff not present in the source
330: #package. For installation the source package is still needed!
331: #This is useful if you want to distribute many binary versions in
332: #little space (e.g., on floppy disk): Put the source package and
333: #all the binonly packages you are interested in on the disk. The user
334: #then just has to unpack the source and his favourite binonly into the
335: #same directory and has a full binary distribution.
336: binonlydist: $(SOURCES) $(FORTH_GEN0) @KERNEL@ $(DOCDIST) $(BINONLYDIST)
337: -$(RMTREE) gforth-$(VERSION)
338: mkdir gforth-$(VERSION)
339: $(TAR) $(BINONLYDIST) | (cd gforth-$(VERSION); tar xf -)
340: strip gforth-$(VERSION)/gforth
341: $(TAR) gforth-$(VERSION)|gzip -9 >gforth-$(VERSION)-binonly-@host@.tar.gz
342:
343:
344: #strip gforth, because the debugging stuff is hardly useful once
345: # gforth manages to execute more than a few primitives
346:
347: #install does not depend on gforth.info, because that would require
348: #supplying a lot of files that can be easily generated (only info is
349: #hard to generate)
350: install: gforth $(FORTH_SRC) kernel.fi gforth.fi doc/gforth.1 prim gforth.TAGS installdirs
351: touch $(datadir)/gforth/site-forth/siteinit.fs
352: -$(RM) $(bindir)/gforth $(bindir)/gforth-$(VERSION)
353: $(INSTALL_PROGRAM) -s gforth $(bindir)
354: ln $(bindir)/gforth $(bindir)/gforth-$(VERSION)
355: -$(INSTALL_DATA) $(srcdir)/doc/gforth.1 $(man1dir)
356: -for i in $(srcdir)/gforth.info*; do $(INSTALL_DATA) $$i $(infodir); done
357: for i in $(FORTH_SRC) prim; do \
358: $(INSTALL_DATA) $(srcdir)/$$i $(datadir)/gforth/$(VERSION); \
359: done
360: $(INSTALL_DATA) kernel.fi $(libdir)/gforth/$(VERSION)
361: $(RM) gforth.fi; $(MAKE) gforth.fi #gforth.fi contains some path names
362: $(INSTALL_DATA) gforth.fi $(libdir)/gforth/$(VERSION)
363: sed 's:^$(srcdir)/:$(datadir)/gforth/$(VERSION)/:' gforth.TAGS >TAGS; $(INSTALL_DATA) TAGS $(datadir)/gforth/$(VERSION)
364: if test -d $(emacssitelispdir); then \
365: $(INSTALL_DATA) $(srcdir)/gforth.el $(emacssitelispdir); \
366: else \
367: echo ">>>>>Please install $(srcdir)/gforth.el in your .../emacs/site-lisp directory"; \
368: fi
369: echo ">>>>> Please make an entry for Gforth in your info dir file; e.g.:"; \
370: echo "* Gforth: (gforth). A fast interpreter for the Forth language."
371:
372: install-strip: install
373:
374: installdirs: mkinstalldirs
375: $(srcdir)/mkinstalldirs $(bindir) $(man1dir) $(infodir) $(libdir)/gforth/$(VERSION) $(datadir)/gforth/$(VERSION) $(libdir)/gforth/site-forth $(datadir)/gforth/site-forth
376:
377: #deinstall all files specific to this version of gforth
378: #to uninstall version foo, type `make uninstall VERSION=foo'
379: uninstall:
380: -$(RM) -rf $(libdir)/gforth/$(VERSION) $(datadir)/gforth/$(VERSION) $(bindir)/gforth-$(VERSION)
381: @echo -e "Type\n$(RM) -rf $(bindir)/gforth $(man1dir)/gforth.1 $(infodir)/gforth.info* $(datadir)/gforth $(libdir)/gforth\nto remove Gforth completely"
382:
383: check test: gforth gforth.fi
384: $(FORTH) test/tester.fs test/coretest.fs test/postpone.fs test/dbltest.fs -e bye
385: $(FORTH) test/other.fs -e bye
386: $(FORTH) code.fs test/checkans.fs -e bye
387: @echo 'Expect no differences'
388: $(FORTH) -m 100000 prims2x.fs -e "s\" $(srcdir)/prim.b\"' output-c process-file bye"| diff -c - $(srcdir)/engine/prim.i
389:
390: bench: gforth gforth.fi
391: @echo 'Each benchmark takes about 30s on a 486-66 (gcc-2.6.3 -DFORCE_REG)'
392: time $(FORTH) siev.fs -e "main bye"
393: time $(FORTH) bubble.fs -e "main bye"
394: time $(FORTH) -m 160000 matrix.fs -e "main bye"
395: time $(FORTH) fib.fs -e "main bye"
396:
397: dvi: gforth.dvi
398:
399: gforth: $(OBJECTS) $(OBJECTS0)
400: -$(CP) gforth gforth~
401: $(GCC) $(LDFLAGS) $(OBJECTS) $(OBJECTS0) $(LDLIBS) -o $@
402: @GFORTH_EXE@
403:
404: gforth-ditc: $(OBJECTS_DITC) $(OBJECTS0)
405: $(GCC) $(LDFLAGS) $(OBJECTS_DITC) $(OBJECTS0) $(LDLIBS) -o $@
406: @GFORTHDITC_EXE@
407:
408: kernl16l.fi-: $(KERN_SRC) kernel/version.fs mach16l.fs $(FORTH_GEN0)
409: $(FORTHK) -e 's" mach16l.fs"' kernel/main.fs -e "save-cross kernl16l.fi- $(bindir)/gforth-$(VERSION) bye"
410:
411: kernl16b.fi-: $(KERN_SRC) kernel/version.fs mach16b.fs $(FORTH_GEN0)
412: $(FORTHK) -e 's" mach16b.fs"' kernel/main.fs -e "save-cross kernl16b.fi- $(bindir)/gforth-$(VERSION) bye"
413:
414: kernl32l.fi-: $(KERN_SRC) kernel/version.fs mach32l.fs $(FORTH_GEN0)
415: $(FORTHK) -e 's" mach32l.fs"' kernel/main.fs -e "save-cross kernl32l.fi- $(bindir)/gforth-$(VERSION) bye"
416:
417: kernl32b.fi-: $(KERN_SRC) kernel/version.fs mach32b.fs $(FORTH_GEN0)
418: $(FORTHK) -e 's" mach32b.fs"' kernel/main.fs -e "save-cross kernl32b.fi- $(bindir)/gforth-$(VERSION) bye"
419:
420: kernl64l.fi-: $(KERN_SRC) kernel/version.fs mach64l.fs $(FORTH_GEN0)
421: $(FORTHK) -e 's" mach64l.fs"' kernel/main.fs -e "save-cross kernl64l.fi- $(bindir)/gforth-$(VERSION) bye"
422:
423: kernl64b.fi-: $(KERN_SRC) kernel/version.fs mach64b.fs $(FORTH_GEN0)
424: $(FORTHK) -e 's" mach64b.fs"' kernel/main.fs -e "save-cross kernl64b.fi- $(bindir)/gforth-$(VERSION) bye"
425:
426: kernl-%.fi: arch/%/mach.fs $(KERN_SRC) kernel/version.fs $(FORTH_GEN0) \
427: arch/%/prim.fs arch/%/asm.fs
428: $(FORTHK) -e 's" $<"' kernel/main.fs -e "save-cross $@- $(bindir)/gforth-$(VERSION) bye"
429: if [ -f `echo $< | sed s/fs/sh/` ]; \
430: then sh `echo $< | sed s/fs/sh/` $@; \
431: else $(CP) $@- $@; \
432: fi
433:
434: kernl16b.fi: $(KERNLS)
435: -$(CP) kernl16b.fi kernl16b.fi~
436: -$(CP) kernl16b.fi- kernl16b.fi
437:
438: kernl16l.fi: $(KERNLS)
439: -$(CP) kernl16l.fi kernl16l.fi~
440: -$(CP) kernl16l.fi- kernl16l.fi
441:
442: kernl32b.fi: $(KERNLS)
443: -$(CP) kernl32b.fi kernl32b.fi~
444: -$(CP) kernl32b.fi- kernl32b.fi
445:
446: kernl32l.fi: $(KERNLS)
447: -$(CP) kernl32l.fi kernl32l.fi~
448: -$(CP) kernl32l.fi- kernl32l.fi
449:
450: kernl64b.fi: $(KERNLS)
451: -$(CP) kernl64b.fi kernl64b.fi~
452: -$(CP) kernl64b.fi- kernl64b.fi
453:
454: kernl64l.fi: $(KERNLS)
455: -$(CP) kernl64l.fi kernl64l.fi~
456: -$(CP) kernl64l.fi- kernl64l.fi
457:
458: #kernl%.fi: kernl%.fi- $(KERNLS)
459: # -$(CP) $@ $@~
460: # -$(CP) $< $@
461:
462: gforth.fi: @kernel_fi@ gforthmi gforth gforth-ditc $(GFORTH_FI_SRC)
463: GFORTHD="./gforth-ditc -p .$(PATHSEP)$(srcdir)" GFORTH="./gforth-ditc -p .$(PATHSEP)$(srcdir) -i kernel.fi startup.fs" $(srcdir)/gforthmi gforth.fi $(FORTHSIZES) $(FORTHKFLAGS) startup.fs
464:
465: #TAGS is a GNU standard target
466: TAGS: gforth.TAGS
467: $(CP) gforth.TAGS $@
468:
469: gforth.TAGS: @kernel_fi@ gforth $(GFORTH_FI_SRC) prim.TAGS
470: $(FORTHK) etags.fs startup.fs -e bye
471: cat TAGS prim.TAGS kernel.TAGS >gforth.TAGS
472: rm TAGS
473:
474: engine/replace.a:
475: cd engine; $(MAKE) replace.a
476:
477: engine.s: engine/engine.c engine/prim.i engine/prim_lab.i machine/machine.h engine/threaded.h $(INCLUDES) engine/config.h
478: $(GCC) $(CFLAGS) $(ENGINE_FLAGS) -S $(srcdir)/engine/engine.c
479:
480: engine/engine.o: engine/engine.c engine/prim.i engine/prim_lab.i machine/machine.h engine/threaded.h $(INCLUDES) engine/config.h
481: $(GCC) $(CFLAGS) $(ENGINE_FLAGS) -c $(srcdir)/engine/engine.c -o $@
482:
483: engine/engine-ditc.o: engine/engine.c engine/prim.i engine/prim_lab.i machine/machine.h engine/threaded.h $(INCLUDES) engine/config.h
484: $(GCC) $(CFLAGS) $(ENGINE_FLAGS) -DDOUBLY_INDIRECT -o $@ -c $(srcdir)/engine/engine.c
485:
486: engine/main.o: engine/main.c machine/machine.h engine/threaded.h $(INCLUDES) engine/config.h engine/version.h
487: $(GCC) $(CFLAGS) $(ENGINE_FLAGS) -o $@ -c $(srcdir)/engine/main.c
488:
489: engine/main-ditc.o: engine/main.c machine/machine.h engine/threaded.h $(INCLUDES) engine/config.h engine/version.h
490: $(GCC) $(CFLAGS) $(ENGINE_FLAGS) -DDOUBLY_INDIRECT -o $@ -c $(srcdir)/engine/main.c
491:
492: engine/strtoul.o: strtoul.c strtol.c
493:
494: prim.b: prim
495: m4 -s $(srcdir)/prim >$@
496:
497: engine/prim.i: prim.b prims2x.fs
498: $(FORTHK) prims2x.fs -e "s\" prim.b\" ' output-c process-file bye" >$@-
499: $(CP) $@- $@
500: $(RM) $@-
501:
502: engine/prim_lab.i: prim.b prims2x.fs
503: $(FORTHK) prims2x.fs -e "s\" prim.b\" ' output-label process-file bye" >$@-
504: $(CP) $@- $@
505: $(RM) $@-
506:
507: kernel/aliases.fs: prim.b prims2x.fs kernel/aliases0.fs
508: $(CP) kernel/aliases0.fs $@-
509: $(FORTHK) prims2x.fs -e "s\" prim.b\" ' output-alias process-file bye" >>$@-
510: $(CP) $@- $@
511: $(RM) $@-
512:
513: kernel/prim.fs: prim.b prims2x.fs kernel/prim0.fs
514: $(CP) kernel/prim0.fs kernel/prim.fs-
515: $(FORTHK) prims2x.fs -e "s\" prim.b\" ' output-forth process-file bye" >>$@-
516: $(CP) $@- $@
517: $(RM) $@-
518:
519: prim.TAGS: prim.b prims2x.fs
520: $(FORTHK) prims2x.fs -e "s\" $(srcdir)/prim.b\" ' output-tag process-file bye" >$@-
521: $(CP) $@- $@
522: $(RM) $@-
523:
524: doc/doc.fd: doc/makedoc.fs $(GFORTH_FI_SRC)
525: $(FORTHK) -e "s\" doc/doc.fd\"" doc/makedoc.fs startup.fs code.fs -e bye
526:
527: doc/crossdoc.fd: $(KERN_SRC) kernel/version.fs $(FORTH_GEN0)
528: $(FORTHK) -e 's" mach32l.fs"' kernel/main.fs -e bye
529:
530: doc/gforth.texi: doc/gforth.ds prim.b ds2texi.fs prims2x.fs \
531: doc/doc.fd doc/crossdoc.fd
532: $(FORTHK) -m 100000 ds2texi.fs prims2x.fs -e "s\" $(srcdir)/prim.b\" ' register-doc process-file" doc/crossdoc.fd doc/doc.fd -e "s\" $(srcdir)/doc/gforth.ds\" r/o open-file throw ds2texi bye" >$@-
533: $(CP) $@- $@
534: $(RM) $@-
535:
536: checkdoc: doc/gforth.ds prim.b ds2texi.fs prims2x.fs doc/doc.fd doc/crossdoc.fd answords.fs doc/gforth.texi
537: $(FORTHK) ds2texi.fs prims2x.fs -e "s\" $(srcdir)/prim.b\" ' register-doc process-file" doc/crossdoc.fd doc/doc.fd answords.fs -e bye
538: -grep unknown doc/gforth.texi
539:
540: dvi: doc/gforth.dvi
541:
542: doc/gforth.dvi doc/gforth.fns: doc/gforth.texi
543: cd doc; $(TEXI2DVI) gforth.texi
544:
545: doc/gforth.ps: doc/gforth.dvi
546: $(DVI2PS) doc/gforth.dvi -o $@
547:
548: info: doc/gforth.info
549:
550: doc/gforth.info doc/gforth.info-*: doc/gforth.texi
551: -cd doc; $(MAKEINFO) gforth.texi
552:
553: html: doc/gforth.texi
554: -$(RM) html/*
555: -mkdir html
556: cd html; $(TEXI2HTML) -menu -split_node ../doc/gforth.texi
557:
558: doc: doc/gforth.ps html
559:
560: # For an explanation of the following Makefile rules, see node
561: # `Automatic Remaking' in GNU Autoconf documentation.
562: $(srcdir)/configure: configure.in
563: cd $(srcdir) && autoconf
564:
565: # autoheader might not change config.h.in, so touch a stamp file.
566: config.h.in: stamp-h.in
567: stamp-h.in: configure.in acconfig.h
568: cd $(srcdir) && autoheader
569: echo timestamp > $(srcdir)/stamp-h.in
570:
571: engine/config.h: stamp-h
572: stamp-h: config.h.in config.status
573: CONFIG_FILES=$@ CONFIG_HEADERS=engine/config.h ./config.status
574: echo > stamp-h
575: Makefile: Makefile.in config.status
576: CONFIG_FILES=$@ CONFIG_HEADERS=engine/config.h ./config.status
577:
578: config.status: configure
579: ./config.status --recheck
580:
581:
582: #create files for DOS, because DOS cannot do it itself
583: makefile.dos: mkdosmf.sed Makefile.in
584: sed -f mkdosmf.sed <Makefile.in >makefile.dos
585: sed -f mkdosmf.sed <engine/Makefile.in >engine/makefile.dos
586:
587: makefile.os2: mkos2mf.sed Makefile.in
588: sed -f mkos2mf.sed <Makefile.in >makefile.os2
589: sed -f mkos2mf.sed <engine/Makefile.in >engine/makefile.os2
590: echo '%.o: %.c' >>makefile.os2
591: echo ' $$(GCC) $$(CFLAGS) -c $$<' >>makefile.os2
592: echo '%.o: %.c' >>engine/makefile.os2
593: echo ' $$(GCC) $$(CFLAGS) -c $$<' >>engine/makefile.os2
594:
595: # history is a little bit different now! JAW
596: #history.dos: history.fs Makefile.in
597: # sed -e "s,~/\.gforth-history,/gforth.his,g" <history.fs >history.dos
598:
599: startup.dos: startup.fs Makefile.in
600: sed -e "s/\\\\ include doskey/include doskey/g" \
601: -e "s/include vt100key/\\\\ include vt100key/g" <startup.fs >startup.dos
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>