Diff for /gforth/Makefile.in between versions 1.8 and 1.89

version 1.8, 1994/11/30 17:46:03 version 1.89, 1997/03/11 16:00:36
Line 1 Line 1
 #Copyright 1992 by the ANSI figForth Development Group  #Makefile for Gforth
   
 VERSION =#gforth version  #Copyright (C) 1995, 1996 Free Software Foundation, Inc.
   
   #This file is part of Gforth.
   
   #Gforth is free software; you can redistribute it and/or
   #modify it under the terms of the GNU General Public License
   #as published by the Free Software Foundation; either version 2
   #of the License, or (at your option) any later version.
   
   #This program is distributed in the hope that it will be useful,
   #but WITHOUT ANY WARRANTY; without even the implied warranty of
   #MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.#See the
   #GNU General Public License for more details.
   
   #You should have received a copy of the GNU General Public License
   #along with this program; if not, write to the Free Software
   #Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
   
   # To change the values of `make' variables: instead of editing Makefiles,
   # (1) if the variable is set in `config.status', edit `config.status'
   #     (which will cause the Makefiles to be regenerated when you run `make');
   # (2) otherwise, pass the desired values on the `make' command line.
   
   #gforth version
   VERSION_MAJOR=0
   VERSION_MINOR=3
   VERSION_RELEASE=0
   VERSION =$(VERSION_MAJOR).$(VERSION_MINOR).$(VERSION_RELEASE)
   DOSVERSION=$(VERSION_MAJOR)$(VERSION_MINOR)$(VERSION_RELEASE)
   SHELL   = /bin/sh
 RM      = rm  RM      = rm
   RMTREE  = rm -rf
 CP      = cp  CP      = cp
 GCC     = gcc  TAR     = tar cf -
 FORTH   = gforth  INSTALL = @INSTALL@
 CC      = gcc  INSTALL_PROGRAM = @INSTALL_PROGRAM@
 #MAKE   = gmake  INSTALL_DATA = @INSTALL_DATA@
 XCFLAGS =  LN_S    = @LN_S@
 XDEFINES        =  GCC     = @CC@
 SWITCHES        = $(XCFLAGS) $(XDEFINES) -DDEFAULTBIN='"'`pwd`'"' #-DNDEBUG #turn off assertions  CC      = $(GCC)
 CFLAGS  = -O4 -Wall $(SWITCHES)  PATHSEP = @PATHSEP@
   FORTHPATH = $(libdir)/gforth/site-forth$(PATHSEP)$(datadir)/gforth/site-forth$(PATHSEP)$(libdir)/gforth/$(VERSION)$(PATHSEP)$(datadir)/gforth/$(VERSION)$(PATHSEP).
   FORTHSIZES = @FORTHSIZES@
   FORTH   = ./gforth -p $(FORTHPATH)$(PATHSEP)$(srcdir)
   FORTHKFLAGS= -p .$(PATHSEP)$(srcdir) -i ./kernel.fi
   FORTHK  = ./gforth $(FORTHKFLAGS)
   FORTHP  = ./gforth -i ./kernel.fi
   STRIP   = strip
   TEXI2DVI = texi2dvi
   DVI2PS  = dvips -D300
   #you can get texi2html from http://asis01.cern.ch/infohtml/texi2html.html
   TEXI2HTML = texi2html
   MAKEINFO = makeinfo
   XCFLAGS = @CFLAGS@
   XDEFINES = @DEFS@
   SWITCHES = $(XCFLAGS) $(XDEFINES) #-DNDEBUG #turn off assertions
   ENGINE_FLAGS = @ENGINE_FLAGS@ -fno-defer-pop -fcaller-saves
   DEBUGFLAG = @DEBUGFLAG@
   CFLAGS  = $(DEBUGFLAG) -I. -I$(srcdir) -O4 -Wall $(SWITCHES) -DDEFAULTPATH=\"$(FORTHPATH)\"
   
 #-Xlinker -n puts text and data into the same 256M region  
 #John Wavrik should use -Xlinker -N to get a writable text (executable)  #John Wavrik should use -Xlinker -N to get a writable text (executable)
 LDFLAGS = -Xlinker -N  XLDFLAGS = @LDFLAGS@
 LDLIBS  = -lm  GCCLDFLAGS = @GCCLDFLAGS@
   LDFLAGS =  $(DEBUGFLAG) $(XLDFLAGS) $(GCCLDFLAGS)
 EMACS   = emacs  LDLIBS  = @LIBS@
   
 INCLUDES = forth.h io.h  VPATH = @srcdir@
   prefix = @prefix@
 FORTH_SRC = add.fs assert.fs ansi.fs blocks.fs bufio.fs checkans.fs \  exec_prefix = @exec_prefix@
         colorize.fs cross.fs debug.fs debugging.fs doskey.fs ds2texi.fs \  srcdir = @srcdir@
         dumpimage.fs environ.fs errore.fs etags.fs extend.fs filedump.fs \  bindir = $(exec_prefix)/bin
         float.fs glocals.fs glosgen.fs gray.fs hash.fs history.fs \  #read-only architecture-independent files
         kernal.fs locals-test.fs look.fs mach32b.fs mach32l.fs main.fs \  datadir = $(prefix)/share
         other.fs prims2x.fs random.fs search-order.fs see.fs sieve.fs \  #read-only architecture-dependent non-ascii files
         startup.fs struct.fs tools.fs toolsext.fs tt.fs vars.fs vt100.fs \  libdir = $(prefix)/lib
         vt100key.fs wordinfo.fs wordsets.fs  infodir = $(prefix)/info
   mandir = $(prefix)/man
 SOURCES = Makefile.in configure  config.sub  config.guess \  man1dir= $(mandir)/man1
         INSTALL README ToDo BUGS model gforth.ds \  man1ext= .1
         primitives engine.c main.c io.c \  #older emacses have their site-lisp in $(libdir)/emacs/
         apollo68k.h decstation.h 386.h hppa.h cache.c ecvt.c sparc.h \  emacssitelispdir=$(datadir)/emacs/site-lisp
         getopt.c getopt1.c getopt.h \  
         makefile.dos io-dos.h configure.bat startup.dos \  INCLUDES = forth.h threading.h io.h
   
   KERN_SRC = \
           aliases0.fs \
           aliases.fs \
           args.fs \
           conditionals.fs \
           cond-old.fs \
           cross.fs \
           errore.fs \
           files.fs \
           kernel.fs \
           main.fs \
           primitives0.fs \
           search-order.fs \
           special.fs \
           tools.fs \
           toolsext.fs \
           vars.fs
   
   GFORTH_FI_SRC = \
           assert.fs \
           blockedit.fb \
           blocks.fs \
           bufio.fs \
           debug.fs \
           debugging.fs \
           dumpimage.fs \
           environ.fs \
           errors.fs \
           extend.fs \
           float.fs \
           glocals.fs \
           hash.fs \
           history.fs \
           intcomp.fs \
           look.fs \
           search-order.fs \
           see.fs \
           see-ext.fs \
           source.fs \
           startup.fs \
           struct.fs \
           stuff.fs \
           tasker.fs \
           termsize.fs \
           vt100.fs \
           vt100key.fs \
           wordinfo.fs
   
   FORTH_SRC = $(KERN_SRC) $(GFORTH_FI_SRC) \
           ans-report.fs ansi.fs answords.fs \
           checkans.fs \
           code.fs colorize.fs comp-image.fs \
           doskey.fs ds2texi.fs \
           etags.fs filedump.fs \
           glosgen.fs gray.fs \
           makedoc.fs \
           mach16b.fs mach16l.fs mach32b.fs mach32l.fs mach64b.fs mach64l.fs \
           more.fs other.fs prims2x.fs random.fs \
           sieve.fs \
           site-init.fs \
           tt.fs sokoban.fs \
           wordsets.fs \
           tester.fs coretest.fs postponetest.fs dbltest.fs \
           bubble.fs siev.fs matrix.fs fib.fs \
           oof.fs oofsampl.fs objects.fs
   
   SOURCES = CVS compat Makefile.in configure.in configure config.sub config.guess \
           acconfig.h config.h.in stamp-h.in \
           install-sh INSTALL README ToDo BUGS model COPYING Benchres \
           gforth.ds texinfo.tex gforth.1 gforth.el \
           primitives engine.c main.c io.c memcasecmp.c \
           m68k.h mips.h 386.h hppa.h cache.c sparc.h power.h alpha.h 32bit.h \
           getopt.c getopt1.c getopt.h select.c \
           ecvt.c memcmp.c strtol.c strtoul.c ansidecl.h memmove.c pow10.c atanh.c \
           strerror.c strsignal.c dblsub.c \
           INSTALL.DOS makefile.dos mkdosmf.sed configure.bat dosconf.h \
           startup.dos history.dos mkinstalldirs \
           configure.cmd mkos2mf.sed os2conf.h makefile.os2 \
         glosgen.glo glossaries.doc \          glosgen.glo glossaries.doc \
         $(INCLUDES) $(FORTH_SRC)          $(INCLUDES) $(FORTH_SRC)
   
 RCS_FILES =  ToDo model high-level  RCS_FILES =  ToDo model high-level
   
 GEN = gforth  GEN = gforth version.fs
   
 OBJECTS = engine.o io.o main.o  OBJECTS0 = io.o memcasecmp.o @LIBOBJS@ @getopt_long@
   OBJECTS = engine.o main.o
   OBJECTS_DITC =  engine-ditc.o main-ditc.o
   
 # things that need a working forth system to be generated  # things that need a working forth system to be generated
   FORTH_GEN0 = primitives.b primitives.i prim_labels.i aliases.fs primitives.fs
   FORTH_GEN =  $(FORTH_GEN0) @KERNEL@ gforth.fi
 # this is used for antidependences,  # this is used for antidependences,
   FORTH_GEN1 = $(FORTH_GEN0) @kernel_fi@ 
   
   #distributed documentation
   DOCDIST = gforth.info* gforth.ps
   
   #stuff in a binonly distribution 
   BINONLYDIST = config.status Makefile gforth gforth-ditc \
           $(OBJECTS0) $(OBJECTS) $(OBJECTS_DITC)\
           machine.h config.h kernel.fi stamp-h version.h version.fs \
           INSTALL.BINDIST
   
   KERNLS = kernl16b.fi- kernl16l.fi- \
            kernl32b.fi- kernl32l.fi- \
            kernl64b.fi- kernl64l.fi-
   
   GEN_PRECIOUS = $(FORTH_GEN) $(KERNLS) gforth.texi gforth.dvi gforth.ps Makefile configure
   
   #standards.info recommends this:
   .SUFFIXES:
   .SUFFIXES: .c .o
   
 FORTH_GEN =  primitives.b primitives.i prim_labels.i aliases.fs kernl32l.fi kernl32b.fi  all:    version.fs more
   
 GEN_PRECIOUS = $(FORTH_GEN) gforth.texi gforth.dvi gforth.ps Makefile  #this rule avoids remaking everything after minor changes in Makefile.in
   version-stamp:  Makefile.in
                   test x'$(VERSION)' = x`cat $@` || echo $(VERSION) >$@
   
 all:  version.h:      version-stamp
         if [ ! -f gforth ]; then $(MAKE) first; fi                  echo "static char gforth_version[]=\"$(VERSION)\" ;" >$@
         $(MAKE) more  
   
 first:  gforth  version.fs:     version-stamp
                   $(MAKE) gforth
                   echo ": version-string s\" $(VERSION)\" ;" >$@
   
 more:   $(FORTH_GEN) gforth  more:   $(OBJECTS) $(FORTH_GEN) gforth
   
 #from the gcc Makefile:   #from the gcc Makefile: 
 #"Deletion of files made during compilation.  #"Deletion of files made during compilation.
Line 71  more: $(FORTH_GEN) gforth Line 224  more: $(FORTH_GEN) gforth
 # `distclean' also deletes the files made by config.  # `distclean' also deletes the files made by config.
 # `realclean' also deletes everything that could be regenerated automatically."  # `realclean' also deletes everything that could be regenerated automatically."
   
 clean:            mostlyclean:
                 -$(RM) $(GEN) *.o *.s                  -$(RM) -rf *.s gforth.fi *.fi~ *.fi- version.fs *TAGS \
                   crossdoc.fd doc.fd gforth.texi gforth.fns gforth.aux gforth.cp gforth.cps \
                   gforth.dvi gforth.fn gforth.ky gforth.log gforth.pg \
                   gforth.toc gforth.tp gforth.vr html gforth-$(VERSION).tar.gz \
                   version.h
   
 distclean:      clean  clean:          mostlyclean
                 -$(RM) machine.h                  -$(RM) -rf $(GEN) *.o 
   
 realclean:      distclean  distclean:      clean
                 -$(RM) $(GEN_PRECIOUS)                  -$(RM) machine.h kernel.fi config.cache config.log \
                   config.status config.h Makefile stamp-h
   
 package:        $(SOURCES) $(FORTH_GEN)  #realclean is useless, but dangerous, so it's commented out
                 -rm ../gforth-$(VERSION)  #realclean:     distclean
                 ln -s `pwd` ../gforth-$(VERSION)  #               -$(RM) $(GEN_PRECIOUS)
                 echo "" $(SOURCES) $(FORTH_GEN) |\  
                         sed -e 's| | gforth-$(VERSION)/|g' |\  #mostlyclean, but also remove some of the stuff that is distributed
                         (cd ..; xargs tar cvf gforth/gforth-$(VERSION).tar)  virtualclean:   mostlyclean
                 gzip -9 -f gforth-$(VERSION).tar                  -$(RM) -rf gforth.fns gforth.texi gforth.ps gforth.info* \
                 -rm ../gforth-$(VERSION)                  gforth-$(VERSION).tar.gz config.cache *~ */*~
   
   #use dist targets only when srcdir=.
   dist:           $(SOURCES) $(FORTH_GEN0) @KERNEL@ $(DOCDIST)
                   -$(RMTREE) gforth-$(VERSION)
                   mkdir gforth-$(VERSION)
                   $(CP) -rp $(SOURCES) $(FORTH_GEN0) @KERNEL@ $(DOCDIST) gforth-$(VERSION)
                   $(TAR) gforth-$(VERSION)|gzip -9 >gforth-$(VERSION).tar.gz
                   -$(RMTREE) gforth-$(VERSION)
   
   #use dist targets only when srcdir=.
   dosdist:        $(SOURCES) $(FORTH_GEN0) @KERNEL@ $(DOCDIST)
                   -$(RMTREE) gforth.$(DOSVERSION)
                   mkdir gforth.$(DOSVERSION)
                   $(CP) -rp $(SOURCES) $(FORTH_GEN) $(DOCDIST) gforth.$(DOSVERSION)
                   zip -r9 gforth.zip gforth.$(DOSVERSION)/*
                   -$(RMTREE) gforth.$(DOSVERSION)
   
   #A source distribution contains only the things needed to install gforth,
   #without the documents.
   srcdist:        $(SOURCES) $(FORTH_GEN0) @KERNEL@
                   -$(RMTREE) gforth-$(VERSION)
                   mkdir gforth-$(VERSION)
                   $(CP) -rp $(SOURCES) $(FORTH_GEN0) @KERNEL@ gforth-$(VERSION)
                   $(TAR) gforth-$(VERSION)|gzip -9 >gforth-src-$(VERSION).tar.gz
                   -$(RMTREE) gforth-$(VERSION)
   
   #A document distribution contains only the documents, which can be created
   #with MAKE.
   docdist:        $(DOCDIST)
                   -$(RMTREE) gforth-$(VERSION)
                   mkdir gforth-$(VERSION)
                   $(CP) -rp $(DOCDIST) gforth-$(VERSION)
                   $(TAR) gforth-$(VERSION)|gzip -9 >gforth-doc-$(VERSION).tar.gz
                   -$(RMTREE) gforth-$(VERSION)
   
   #a binary distribution contains the complete source distribution,
   # the objects, the executable and the links. the objects are there for making
   # make happy.
   bindist:        $(SOURCES) $(FORTH_GEN0) @KERNEL@ $(DOCDIST) $(BINONLYDIST)
                   -$(RMTREE) gforth-$(VERSION)
                   mkdir gforth-$(VERSION)
                   $(CP) -rp -d $(SOURCES) $(FORTH_GEN0) @KERNEL@ $(DOCDIST) $(BINONLYDIST) gforth-$(VERSION)
                   strip gforth-$(VERSION)/gforth
                   $(TAR) gforth-$(VERSION)|gzip -9 >gforth-$(VERSION)-@host@.tar.gz
   
   #makes a package with only the stuff not present in the source
   #package. For installation the source package is still needed!
   #This is useful if you want to distribute many binary versions in
   #little space (e.g., on floppy disk): Put the source package and
   #all the binonly packages you are interested in on the disk. The user
   #then just has to unpack the source and his favourite binonly into the
   #same directory and has a full binary distribution.
   binonlydist:    $(SOURCES) $(FORTH_GEN0) @KERNEL@ $(DOCDIST) $(BINONLYDIST)
                   -$(RMTREE) gforth-$(VERSION)
                   mkdir gforth-$(VERSION)
                   $(CP) -p -d  $(BINONLYDIST) gforth-$(VERSION)
                   strip gforth-$(VERSION)/gforth
                   $(TAR) gforth-$(VERSION)|gzip -9 >gforth-$(VERSION)-binonly-@host@.tar.gz
   
   
   #strip gforth, because the debugging stuff is hardly useful once
   # gforth manages to execute more than a few primitives
   
   #install does not depend on gforth.info, because that would require
   #supplying a lot of files that can be easily generated (only info is
   #hard to generate)
   install:        gforth $(FORTH_SRC) kernel.fi gforth.fi gforth.1 primitives gforth.TAGS installdirs
                   touch $(datadir)/gforth/site-forth/site-init.fs
                   -$(RM) $(bindir)/gforth $(bindir)/gforth-$(VERSION)
                   $(INSTALL_PROGRAM) -s gforth $(bindir)
                   ln $(bindir)/gforth $(bindir)/gforth-$(VERSION)
                   -$(INSTALL_DATA) $(srcdir)/gforth.1 $(man1dir)
                   -for i in $(srcdir)/gforth.info*; do $(INSTALL_DATA) $$i $(infodir); done
                   for i in $(FORTH_SRC) primitives; do \
                           $(INSTALL_DATA) $(srcdir)/$$i $(datadir)/gforth/$(VERSION); \
                   done
                   $(INSTALL_DATA) kernel.fi $(libdir)/gforth/$(VERSION)
                   $(RM) gforth.fi; $(MAKE) gforth.fi #gforth.fi contains some path names
                   $(INSTALL_DATA) gforth.fi $(libdir)/gforth/$(VERSION)
                   sed s:^$(srcdir)/:$(datadir)/gforth/$(VERSION)/: gforth.TAGS >TAGS; $(INSTALL_DATA) TAGS $(datadir)/gforth/$(VERSION)
                   if test -d $(emacssitelispdir); then \
                           $(INSTALL_DATA) $(srcdir)/gforth.el $(emacssitelispdir); \
                   else \
                           echo ">>>>>Please install $(srcdir)/gforth.el in your .../emacs/site-lisp directory"; \
                   fi
                   echo ">>>>> Please make an entry for Gforth in your info dir file; e.g.:"; \
                   echo "* Gforth: (gforth).       A fast interpreter for the Forth language."
   
   install-strip:  install
   
   installdirs:    mkinstalldirs
                   $(srcdir)/mkinstalldirs $(bindir) $(man1dir) $(infodir) $(libdir)/gforth/$(VERSION) $(datadir)/gforth/$(VERSION) $(libdir)/gforth/site-forth $(datadir)/gforth/site-forth
   
   #deinstall all files specific to this version of gforth
   #to uninstall version foo, type `make uninstall VERSION=foo'
   uninstall:      
                   -$(RM) -rf $(libdir)/gforth/$(VERSION) $(datadir)/gforth/$(VERSION) $(bindir)/gforth-$(VERSION)
                   @echo -e "Type\n$(RM) -rf $(bindir)/gforth $(man1dir)/gforth.1 $(infodir)/gforth.info* $(datadir)/gforth $(libdir)/gforth\nto remove Gforth completely"
   
   check test:     gforth gforth.fi
                   $(FORTH) tester.fs coretest.fs postponetest.fs dbltest.fs -e bye
                   $(FORTH) code.fs checkans.fs -e bye
                   @echo 'Expect no differences'
                   $(FORTH) -m 100000 prims2x.fs -e "s\" $(srcdir)/primitives.b\" ' output-c process-file bye"| diff -c - $(srcdir)/primitives.i
   
   bench:          gforth gforth.fi
                   @echo 'Each benchmark takes about 30s on a 486-66 (gcc-2.6.3 -DFORCE_REG)'
                   time $(FORTH) siev.fs -e "main bye"
                   time $(FORTH) bubble.fs -e "main bye"
                   time $(FORTH) -m 160000 matrix.fs -e "main bye"
                   time $(FORTH) fib.fs -e "main bye"
   
 Makefile:       Makefile.in  dvi:            gforth.dvi
                 configure  
   
 gforth: $(OBJECTS)  gforth:         $(OBJECTS) $(OBJECTS0)
                 -$(CP) gforth gforth~                  -$(CP) gforth gforth~
                 $(GCC) $(LDFLAGS) $(OBJECTS) $(LDLIBS) -o $@                  $(GCC) $(LDFLAGS) $(OBJECTS) $(OBJECTS0) $(LDLIBS) -o $@
                 @MAKE-EXECUTE@                  @MAKE_EXE@
   
 kernl32l.fi:    main.fs search-order.fs cross.fs aliases.fs vars.fs add.fs \  gforth-ditc:    $(OBJECTS_DITC) $(OBJECTS0)
                 errore.fs kernal.fs extend.fs tools.fs toolsext.fs \                  $(GCC) $(LDFLAGS) $(OBJECTS_DITC) $(OBJECTS0) $(LDLIBS) -o $@
                 mach32l.fs $(FORTH_GEN)                  @MAKE_EXE@
                 -$(CP) kernl32l.fi kernl32l.fi~  
                 $(FORTH) -e 's" mach32l.fs"' main.fs  kernl16l.fi-:   $(KERN_SRC) version.fs mach16l.fs $(FORTH_GEN0)
                 @LINK-KERNL32L@                  $(FORTHK) -e 's" mach16l.fs"' main.fs -e "save-cross kernl16l.fi- $(bindir)/gforth-$(VERSION) bye"
   
   kernl16b.fi-:   $(KERN_SRC) version.fs mach16b.fs $(FORTH_GEN0)
                   $(FORTHK) -e 's" mach16b.fs"' main.fs -e "save-cross kernl16b.fi- $(bindir)/gforth-$(VERSION) bye"
   
   kernl32l.fi-:   $(KERN_SRC) version.fs mach32l.fs $(FORTH_GEN0)
                   $(FORTHK) -e 's" mach32l.fs"' main.fs -e "save-cross kernl32l.fi- $(bindir)/gforth-$(VERSION) bye"
   
   kernl32b.fi-:   $(KERN_SRC) version.fs mach32b.fs $(FORTH_GEN0)
                   $(FORTHK) -e 's" mach32b.fs"' main.fs -e "save-cross kernl32b.fi- $(bindir)/gforth-$(VERSION) bye"
   
   kernl64l.fi-:   $(KERN_SRC) version.fs mach64l.fs $(FORTH_GEN0)
                   $(FORTHK) -e 's" mach64l.fs"' main.fs -e "save-cross kernl64l.fi- $(bindir)/gforth-$(VERSION) bye"
   
   kernl64b.fi-:   $(KERN_SRC) version.fs mach64b.fs $(FORTH_GEN0)
                   $(FORTHK) -e 's" mach64b.fs"' main.fs -e "save-cross kernl64b.fi- $(bindir)/gforth-$(VERSION) bye"
   
   kernl%.fi-:     mach%.fs $(KERN_SRC) version.fs $(FORTH_GEN0)
                   $(FORTHK) -e 's" $<"' main.fs -e "save-cross $@ $(bindir)/gforth-$(VERSION) bye"
   
 kernl32b.fi:    main.fs search-order.fs cross.fs aliases.fs vars.fs add.fs \  kernl16b.fi:    $(KERNLS)
                 errore.fs kernal.fs extend.fs tools.fs toolsext.fs \                  -$(CP) kernl16b.fi kernl16b.fi~
                 mach32b.fs $(FORTH_GEN)                  -$(CP) kernl16b.fi- kernl16b.fi
   
   kernl16l.fi:    $(KERNLS)
                   -$(CP) kernl16l.fi kernl16l.fi~
                   -$(CP) kernl16l.fi- kernl16l.fi
   
   kernl32b.fi:    $(KERNLS)
                 -$(CP) kernl32b.fi kernl32b.fi~                  -$(CP) kernl32b.fi kernl32b.fi~
                 $(FORTH) -e 's" mach32b.fs"' main.fs                  -$(CP) kernl32b.fi- kernl32b.fi
                 @LINK-KERNL32B@  
   kernl32l.fi:    $(KERNLS)
                   -$(CP) kernl32l.fi kernl32l.fi~
                   -$(CP) kernl32l.fi- kernl32l.fi
   
   kernl64b.fi:    $(KERNLS)
                   -$(CP) kernl64b.fi kernl64b.fi~
                   -$(CP) kernl64b.fi- kernl64b.fi
   
   kernl64l.fi:    $(KERNLS)
                   -$(CP) kernl64l.fi kernl64l.fi~
                   -$(CP) kernl64l.fi- kernl64l.fi
   
   kernl%.fi:      kernl%.fi- $(KERNLS)
                   -$(CP) $@ $@~
                   -$(CP) $< $@
   
   gforth.fi:      @kernel_fi@ gforth-makeimage gforth gforth-ditc $(GFORTH_FI_SRC)
                   GFORTHD=./gforth-ditc $(srcdir)/gforth-makeimage gforth.fi $(FORTHSIZES) $(FORTHKFLAGS) startup.fs
   
   #TAGS is a GNU standard target
   TAGS:           gforth.TAGS
                   $(CP) gforth.TAGS $@
   
   gforth.TAGS:    @kernel_fi@ gforth $(GFORTH_FI_SRC) primitives.TAGS
                   $(FORTHK) etags.fs startup.fs -e bye
                   cat TAGS primitives.TAGS kernel.TAGS >gforth.TAGS
                   rm TAGS
   
 engine.s:       engine.c primitives.i prim_labels.i machine.h $(INCLUDES)  engine.s:       engine.c primitives.i prim_labels.i machine.h threading.h $(INCLUDES) config.h
                 $(GCC) $(CFLAGS) -S engine.c                  $(GCC) $(CFLAGS) $(ENGINE_FLAGS) -S $(srcdir)/engine.c
   
 engine.o:       engine.c primitives.i prim_labels.i machine.h $(INCLUDES)  engine.o:       engine.c primitives.i prim_labels.i machine.h threading.h $(INCLUDES) config.h
                   $(GCC) $(CFLAGS) $(ENGINE_FLAGS) -c $(srcdir)/engine.c
   
   engine-ditc.o:  engine.c primitives.i prim_labels.i machine.h threading.h $(INCLUDES) config.h
                   $(GCC) $(CFLAGS) $(ENGINE_FLAGS) -DDOUBLY_INDIRECT -o $@ -c $(srcdir)/engine.c
   
   main.o:         main.c machine.h threading.h $(INCLUDES) config.h version.h
                   $(GCC) $(CFLAGS) $(ENGINE_FLAGS) -c $(srcdir)/main.c
   
   main-ditc.o:    main.c machine.h threading.h $(INCLUDES) config.h version.h
                   $(GCC) $(CFLAGS) $(ENGINE_FLAGS) -DDOUBLY_INDIRECT -o $@ -c $(srcdir)/main.c
   
   strtoul.o:      strtoul.c strtol.c
   
 primitives.b:   primitives  primitives.b:   primitives
                 m4 primitives >$@                   m4 -s $(srcdir)/primitives >$@ 
   
 primitives.i :  primitives.b prims2x.fs  primitives.i :  primitives.b prims2x.fs
                 $(FORTH) prims2x.fs -e "s\" primitives.b\" ' output-c process-file bye" >$@                  $(FORTHK) prims2x.fs -e "s\" primitives.b\" ' output-c process-file bye" >$@
   
 prim_labels.i : primitives.b prims2x.fs  prim_labels.i : primitives.b prims2x.fs
                 $(FORTH) prims2x.fs -e "s\" primitives.b\" ' output-label process-file bye" >$@                  $(FORTHK) prims2x.fs -e "s\" primitives.b\" ' output-label process-file bye" >$@
   
   aliases.fs:     primitives.b prims2x.fs aliases0.fs
                   $(FORTHK) prims2x.fs -e "s\" primitives.b\" ' output-alias process-file bye" |cat aliases0.fs - >$@
   
 aliases.fs:     primitives.b prims2x.fs  primitives.fs:  primitives.b prims2x.fs primitives0.fs
                 $(FORTH) prims2x.fs -e "s\" primitives.b\" ' output-alias process-file bye" >$@                  $(FORTHK) prims2x.fs -e "s\" primitives.b\" ' output-forth process-file bye"|cat primitives0.fs - >$@
   
 primitives.fs:  primitives.b prims2x.fs  primitives.TAGS: primitives.b prims2x.fs
                 $(FORTH) prims2x.fs -e "s\" primitives.b\" ' output-forth process-file bye" >$@                  $(FORTHK) prims2x.fs -e "s\" $(srcdir)/primitives.b\" ' output-tag process-file bye" >$@
   
 gforth.texi:    gforth.ds primitives.b ds2texi.fs prims2x.fs  doc.fd:         makedoc.fs float.fs search-order.fs glocals.fs environ.fs \
                 $(FORTH) ds2texi.fs >$@                   toolsext.fs wordinfo.fs \
                    vt100.fs colorize.fs see.fs bufio.fs debug.fs history.fs \
                    doskey.fs vt100key.fs startup.fs assert.fs debugging.fs code.fs
                   $(FORTHK) -e "s\" doc.fd\"" makedoc.fs startup.fs code.fs -e bye
   
 gforth.dvi:     gforth.texi  crossdoc.fd:    $(KERN_SRC) version.fs $(FORTH_GEN0)
                 tex gforth.texi                  $(FORTHK) -e 's" mach32l.fs"' main.fs -e bye
   
   gforth.texi:    gforth.ds primitives.b ds2texi.fs prims2x.fs doc.fd crossdoc.fd
                   $(FORTHK) -m 100000 ds2texi.fs prims2x.fs -e "s\" $(srcdir)/primitives.b\" ' register-doc process-file" crossdoc.fd doc.fd -e "s\" $(srcdir)/gforth.ds\" r/o open-file throw ds2texi bye" >$@
   
   checkdoc:       gforth.ds primitives.b ds2texi.fs prims2x.fs doc.fd crossdoc.fd answords.fs
                   $(FORTHK) ds2texi.fs answords.fs -e bye
   
   dvi:            gforth.dvi
   
   gforth.dvi gforth.fns:  gforth.texi
                   $(TEXI2DVI) gforth.texi
   
 gforth.ps:      gforth.dvi  gforth.ps:      gforth.dvi
                 dvips gforth.dvi -o $@                  $(DVI2PS) gforth.dvi -o $@
   
   info:           gforth.info
   
 %.s :           %.c $(INCLUDES)  gforth.info:    gforth.texi
                 $(CC) $(CFLAGS) -S $< -o $@                  -$(MAKEINFO) gforth.texi
   
 %.o :           %.s  html:           gforth.texi
                 $(CC) $(CFLAGS) -c $< -o $@                  -$(RM) html/*
                   -mkdir html
                   cd html; $(TEXI2HTML) -menu -split_node ../gforth.texi
   
   doc:            gforth.ps html
   
   # For an explanation of the following Makefile rules, see node
   # `Automatic Remaking' in GNU Autoconf documentation.
   $(srcdir)/configure:    configure.in 
                   cd $(srcdir) && autoconf
   
   # autoheader might not change config.h.in, so touch a stamp file.
   $(srcdir)/config.h.in:  stamp-h.in
   $(srcdir)/stamp-h.in:   configure.in  acconfig.h
                   cd $(srcdir) && autoheader
                   echo timestamp > $(srcdir)/stamp-h.in
   
   config.h:       stamp-h
   stamp-h:        config.h.in config.status
                   CONFIG_FILES=$@ CONFIG_HEADERS=config.h ./config.status
                   echo > stamp-h
   Makefile:       Makefile.in config.status
                   CONFIG_FILES=$@ CONFIG_HEADERS=config.h ./config.status
        
   config.status:  configure
                   ./config.status --recheck
   
   
   #create files for DOS, because DOS cannot do it itself
   makefile.dos: mkdosmf.sed Makefile.in
           sed -f mkdosmf.sed <Makefile.in >makefile.dos
   
   makefile.os2: mkos2mf.sed Makefile.in
           sed -f mkos2mf.sed <Makefile.in >makefile.os2
           echo '%.o:      %.c' >>makefile.os2
           echo '          $$(GCC) $$(CFLAGS) -c $$<' >>makefile.os2
   
   history.dos: history.fs Makefile.in
           sed -e "s,~/\.gforth-history,/gforth.his,g" <history.fs >history.dos
   
   startup.dos: startup.fs Makefile.in
           sed -e "s/\\\\ include doskey/include doskey/g" \
               -e "s/include vt100key/\\\\ include vt100key/g" <startup.fs >startup.dos
   

Removed from v.1.8  
changed lines
  Added in v.1.89


FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>