--- gforth/Makefile.in 1995/01/19 17:47:55 1.13 +++ gforth/Makefile.in 1997/02/06 21:22:56 1.82 @@ -1,36 +1,71 @@ -#Copyright 1992 by the ANSI figForth Development Group +#Makefile for Gforth + +#Copyright (C) 1995, 1996 Free Software Foundation, Inc. + +#This file is part of Gforth. + +#Gforth is free software; you can redistribute it and/or +#modify it under the terms of the GNU General Public License +#as published by the Free Software Foundation; either version 2 +#of the License, or (at your option) any later version. + +#This program is distributed in the hope that it will be useful, +#but WITHOUT ANY WARRANTY; without even the implied warranty of +#MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.#See the +#GNU General Public License for more details. + +#You should have received a copy of the GNU General Public License +#along with this program; if not, write to the Free Software +#Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. -#To do: -#use $(srcdir) to make compilation in a non-srcdir possible - -VERSION =0.1alpha#gforth version +#gforth version +VERSION_MAJOR=0 +VERSION_MINOR=2 +VERSION_RELEASE=9 +VERSION =$(VERSION_MAJOR).$(VERSION_MINOR).$(VERSION_RELEASE) +DOSVERSION=$(VERSION_MAJOR)$(VERSION_MINOR)$(VERSION_RELEASE) SHELL = /bin/sh RM = rm +RMTREE = rm -rf CP = cp +TAR = tar cf - INSTALL = @INSTALL@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_DATA = @INSTALL_DATA@ LN_S = @LN_S@ -GCC = gcc -FORTH = ./gforth -CC = gcc -TEXI2DVI = tex -DVI2PS = dvips +GCC = @CC@ +CC = $(GCC) +PATHSEP = @PATHSEP@ +FORTHPATH = $(libdir)/gforth/site-forth$(PATHSEP)$(datadir)/gforth/site-forth$(PATHSEP)$(libdir)/gforth/$(VERSION)$(PATHSEP)$(datadir)/gforth/$(VERSION)$(PATHSEP). +FORTHSIZES = @FORTHSIZES@ +FORTH = ./gforth -p $(FORTHPATH)$(PATHSEP)$(srcdir) +FORTHK = ./gforth -p .$(PATHSEP)$(srcdir) -i ./kernel.fi +FORTHP = ./gforth -i ./kernel.fi +STRIP = strip +TEXI2DVI = texi2dvi +DVI2PS = dvips -D300 +#you can get texi2html from http://asis01.cern.ch/infohtml/texi2html.html +TEXI2HTML = texi2html MAKEINFO = makeinfo XCFLAGS = @CFLAGS@ XDEFINES = @DEFS@ SWITCHES = $(XCFLAGS) $(XDEFINES) #-DNDEBUG #turn off assertions -ENGINE_FLAGS = -fforce-mem -fforce-addr -fomit-frame-pointer -fno-defer-pop -fcaller-saves -CFLAGS = -g -O4 -Wall $(SWITCHES) +ENGINE_FLAGS = @ENGINE_FLAGS@ -fno-defer-pop -fcaller-saves +DEBUGFLAG = @DEBUGFLAG@ +CFLAGS = $(DEBUGFLAG) -I. -I$(srcdir) -O4 -Wall $(SWITCHES) -DDEFAULTPATH=\"$(FORTHPATH)\" #John Wavrik should use -Xlinker -N to get a writable text (executable) -LDFLAGS = @LDFLAGS@ +XLDFLAGS = @LDFLAGS@ +GCCLDFLAGS = @GCCLDFLAGS@ +LDFLAGS = $(DEBUGFLAG) $(XLDFLAGS) $(GCCLDFLAGS) LDLIBS = @LIBS@ +VPATH = @srcdir@ prefix = @prefix@ exec_prefix = @exec_prefix@ srcdir = @srcdir@ @@ -40,53 +75,133 @@ datadir = $(prefix)/share #read-only architecture-dependent non-ascii files libdir = $(prefix)/lib infodir = $(prefix)/info -mandir = $(prefix)/man/man1 - - -INCLUDES = forth.h io.h - -FORTH_SRC = add.fs assert.fs ansi.fs blocks.fs bufio.fs checkans.fs \ - colorize.fs cross.fs debug.fs debugging.fs doskey.fs ds2texi.fs \ - dumpimage.fs environ.fs errore.fs etags.fs extend.fs filedump.fs \ - float.fs glocals.fs glosgen.fs gray.fs hash.fs history.fs \ - kernal.fs locals-test.fs look.fs main.fs \ - mach16b.fs mach16l.fs mach32b.fs mach32l.fs mach64b.fs mach64l.fs \ - other.fs prims2x.fs random.fs search-order.fs see.fs sieve.fs \ - startup.fs struct.fs tools.fs toolsext.fs tt.fs vars.fs vt100.fs \ - vt100key.fs wordinfo.fs wordsets.fs - -SOURCES = Makefile.in configure.in configure config.sub config.guess \ - INSTALL README ToDo BUGS model gforth.ds install-sh \ - primitives engine.c main.c io.c \ - m68k.h mips.h 386.h hppa.h cache.c sparc.h 32bit.h \ - getopt.c getopt1.c getopt.h \ - ecvt.c memcmp.c strtol.c strtoul.c memmove.c \ - makefile.dos io-dos.h configure.bat startup.dos \ +mandir = $(prefix)/man +man1dir= $(mandir)/man1 +man1ext= .1 +#older emacses have their site-lisp in $(libdir)/emacs/ +emacssitelispdir=$(datadir)/emacs/site-lisp + +INCLUDES = forth.h threading.h io.h + +KERN_SRC = \ + aliases0.fs \ + aliases.fs \ + conditionals.fs \ + cross.fs \ + errore.fs \ + files.fs \ + kernel.fs \ + main.fs \ + search-order.fs \ + special.fs \ + tools.fs \ + toolsext.fs \ + vars.fs + +GFORTH_FI_SRC = \ + assert.fs \ + blockedit.fb \ + blocks.fs \ + bufio.fs \ + debug.fs \ + debugging.fs \ + dumpimage.fs \ + environ.fs \ + errors.fs \ + extend.fs \ + float.fs \ + glocals.fs \ + hash.fs \ + history.fs \ + intcomp.fs \ + look.fs \ + search-order.fs \ + see.fs \ + source.fs \ + startup.fs \ + struct.fs \ + stuff.fs \ + tasker.fs \ + termsize.fs \ + vt100.fs \ + vt100key.fs \ + wordinfo.fs + +FORTH_SRC = $(KERN_SRC) $(GFORTH_FI_SRC) \ + ans-report.fs ansi.fs answords.fs \ + checkans.fs \ + code.fs colorize.fs \ + doskey.fs ds2texi.fs \ + etags.fs filedump.fs \ + glosgen.fs gray.fs \ + makedoc.fs \ + mach16b.fs mach16l.fs mach32b.fs mach32l.fs mach64b.fs mach64l.fs \ + more.fs other.fs prims2x.fs random.fs \ + sieve.fs \ + site-init.fs \ + tt.fs sokoban.fs \ + wordsets.fs \ + tester.fs coretest.fs postponetest.fs dbltest.fs \ + bubble.fs siev.fs matrix.fs fib.fs \ + oof.fs oofsampl.fs objects.fs + +SOURCES = CVS compat Makefile.in configure.in configure config.sub config.guess \ + acconfig.h config.h.in stamp-h.in \ + install-sh INSTALL README ToDo BUGS model COPYING Benchres \ + gforth.ds texinfo.tex gforth.1 gforth.el \ + primitives engine.c main.c io.c memcasecmp.c \ + m68k.h mips.h 386.h hppa.h cache.c sparc.h power.h alpha.h 32bit.h \ + getopt.c getopt1.c getopt.h select.c \ + ecvt.c memcmp.c strtol.c strtoul.c ansidecl.h memmove.c pow10.c atanh.c \ + strerror.c strsignal.c dblsub.c \ + INSTALL.DOS makefile.dos mkdosmf.sed configure.bat dosconf.h \ + startup.dos history.dos \ + configure.cmd mkos2mf.sed os2conf.h makefile.os2 \ glosgen.glo glossaries.doc \ $(INCLUDES) $(FORTH_SRC) RCS_FILES = ToDo model high-level -GEN = gforth +GEN = gforth version.fs -OBJECTS = engine.o io.o main.o @LIBOBJS@ @getopt_long@ +OBJECTS = engine.o io.o main.o memcasecmp.o @LIBOBJS@ @getopt_long@ # things that need a working forth system to be generated +FORTH_GEN0 = primitives.b primitives.i prim_labels.i aliases.fs +FORTH_GEN = $(FORTH_GEN0) @KERNEL@ gforth.fi # this is used for antidependences, +FORTH_GEN1 = $(FORTH_GEN0) @kernel_fi@ + +#distributed documentation +DOCDIST = gforth.info* gforth.ps -FORTH_GEN = primitives.b primitives.i prim_labels.i aliases.fs @KERNAL@ +#stuff in a binonly distribution +BINONLYDIST = config.status Makefile gforth $(OBJECTS) \ + machine.h config.h kernel.fi stamp-h version.h version.fs \ + INSTALL.BINDIST -GEN_PRECIOUS = $(FORTH_GEN) gforth.texi gforth.dvi gforth.ps Makefile configure +KERNLS = kernl16b.fi- kernl16l.fi- \ + kernl32b.fi- kernl32l.fi- \ + kernl64b.fi- kernl64l.fi- + +GEN_PRECIOUS = $(FORTH_GEN) $(KERNLS) gforth.texi gforth.dvi gforth.ps Makefile configure #standards.info recommends this: .SUFFIXES: .SUFFIXES: .c .o -all: - if [ ! -f gforth ]; then $(MAKE) first; fi - $(MAKE) more +all: version.fs more -first: gforth +#this rule avoids remaking everything after minor changes in Makefile.in +version-stamp: Makefile.in + test x'$(VERSION)' = x`cat $@` || echo $(VERSION) >$@ + +version.h: version-stamp + echo "static char gforth_version[]=\"$(VERSION)\" ;" >$@ + +version.fs: version-stamp + $(MAKE) gforth + echo ": version-string s\" $(VERSION)\" ;" >$@ more: $(FORTH_GEN) gforth @@ -101,132 +216,308 @@ more: $(FORTH_GEN) gforth # `distclean' also deletes the files made by config. # `realclean' also deletes everything that could be regenerated automatically." -clean: - -$(RM) $(GEN) *.o *.s +mostlyclean: + -$(RM) -rf *.s gforth.fi *.fi~ *.fi- version.fs *TAGS \ + crossdoc.fd doc.fd gforth.texi gforth.fns gforth.aux gforth.cp gforth.cps \ + gforth.dvi gforth.fn gforth.ky gforth.log gforth.pg \ + gforth.toc gforth.tp gforth.vr html gforth-$(VERSION).tar.gz \ + version.h -distclean: clean - -$(RM) machine.h gforth.fi config.cache config.log +clean: mostlyclean + -$(RM) -rf $(GEN) *.o -realclean: distclean - -$(RM) $(GEN_PRECIOUS) +distclean: clean + -$(RM) machine.h kernel.fi config.cache config.log \ + config.status config.h Makefile stamp-h -dist: $(SOURCES) $(FORTH_GEN) - -rm gforth-$(VERSION) - ln -s `pwd` gforth-$(VERSION) - echo "" $(SOURCES) $(FORTH_GEN) |\ - sed -e 's| | gforth-$(VERSION)/|g' |\ - xargs tar cvf gforth-$(VERSION).tar - gzip -9 -f gforth-$(VERSION).tar - -rm gforth-$(VERSION) - -install: gforth $(FORTH_SRC) gforth.fi gforth.1 gforth.info - $(INSTALL) -d $(bindir) $(mandir) $(infodir) $(libdir)/gforth $(datadir)/gforth - $(INSTALL_PROGRAM) gforth $(bindir) - $(INSTALL_DATA) gforth.1 $(mandir) - $(INSTALL_DATA) gforth.info* $(infodir) - $(INSTALL_DATA) gforth.fi $(libdir)/gforth - for i in $(FORTH_SRC); do \ - $(CP) $$i $(datadir)/gforth; \ - $(LN_S) $(datadir)/gforth/$$i $(libdir)/gforth \ +#realclean is useless, but dangerous, so it's commented out +#realclean: distclean +# -$(RM) $(GEN_PRECIOUS) + +#mostlyclean, but also remove some of the stuff that is distributed +virtualclean: mostlyclean + -$(RM) -rf gforth.fns gforth.texi gforth.ps gforth.info* \ + gforth-$(VERSION).tar.gz config.cache *~ */*~ + +#use dist targets only when srcdir=. +dist: $(SOURCES) $(FORTH_GEN0) @KERNEL@ $(DOCDIST) + -$(RMTREE) gforth-$(VERSION) + mkdir gforth-$(VERSION) + $(CP) -rp $(SOURCES) $(FORTH_GEN0) @KERNEL@ $(DOCDIST) gforth-$(VERSION) + $(TAR) gforth-$(VERSION)|gzip -9 >gforth-$(VERSION).tar.gz + -$(RMTREE) gforth-$(VERSION) + +#use dist targets only when srcdir=. +dosdist: $(SOURCES) $(FORTH_GEN0) @KERNEL@ $(DOCDIST) + -$(RMTREE) gforth.$(DOSVERSION) + mkdir gforth.$(DOSVERSION) + $(CP) -rp $(SOURCES) $(FORTH_GEN0) @KERNEL@ $(DOCDIST) gforth.$(DOSVERSION) + zip -r9 gforth.zip gforth.$(DOSVERSION)/* + -$(RMTREE) gforth.$(DOSVERSION) + +#A source distribution contains only the things needed to install gforth, +#without the documents. +srcdist: $(SOURCES) $(FORTH_GEN0) @KERNEL@ + -$(RMTREE) gforth-$(VERSION) + mkdir gforth-$(VERSION) + $(CP) -rp $(SOURCES) $(FORTH_GEN0) @KERNEL@ gforth-$(VERSION) + $(TAR) gforth-$(VERSION)|gzip -9 >gforth-src-$(VERSION).tar.gz + -$(RMTREE) gforth-$(VERSION) + +#A document distribution contains only the documents, which can be created +#with MAKE. +docdist: $(DOCDIST) + -$(RMTREE) gforth-$(VERSION) + mkdir gforth-$(VERSION) + $(CP) -rp $(DOCDIST) gforth-$(VERSION) + $(TAR) gforth-$(VERSION)|gzip -9 >gforth-doc-$(VERSION).tar.gz + -$(RMTREE) gforth-$(VERSION) + +#a binary distribution contains the complete source distribution, +# the objects, the executable and the links. the objects are there for making +# make happy. +bindist: $(SOURCES) $(FORTH_GEN0) @KERNEL@ $(DOCDIST) $(BINONLYDIST) + -$(RMTREE) gforth-$(VERSION) + mkdir gforth-$(VERSION) + $(CP) -rp -d $(SOURCES) $(FORTH_GEN0) @KERNEL@ $(DOCDIST) $(BINONLYDIST) gforth-$(VERSION) + strip gforth-$(VERSION)/gforth + $(TAR) gforth-$(VERSION)|gzip -9 >gforth-$(VERSION)-@host@.tar.gz + +#makes a package with only the stuff not present in the source +#package. For installation the source package is still needed! +#This is useful if you want to distribute many binary versions in +#little space (e.g., on floppy disk): Put the source package and +#all the binonly packages you are interested in on the disk. The user +#then just has to unpack the source and his favourite binonly into the +#same directory and has a full binary distribution. +binonlydist: $(SOURCES) $(FORTH_GEN0) @KERNEL@ $(DOCDIST) $(BINONLYDIST) + -$(RMTREE) gforth-$(VERSION) + mkdir gforth-$(VERSION) + $(CP) -p -d $(BINONLYDIST) gforth-$(VERSION) + strip gforth-$(VERSION)/gforth + $(TAR) gforth-$(VERSION)|gzip -9 >gforth-$(VERSION)-binonly-@host@.tar.gz + + +#strip gforth, because the debugging stuff is hardly useful once +# gforth manages to execute more than a few primitives + +#install does not depend on gforth.info, because that would require +#supplying a lot of files that can be easily generated (only info is +#hard to generate) +install: gforth $(FORTH_SRC) kernel.fi gforth.fi gforth.1 primitives gforth.TAGS installdirs + touch $(datadir)/gforth/site-forth/site-init.fs + -$(RM) $(bindir)/gforth $(bindir)/gforth-$(VERSION) + $(INSTALL_PROGRAM) -s gforth $(bindir) + ln $(bindir)/gforth $(bindir)/gforth-$(VERSION) + $(INSTALL_DATA) $(srcdir)/gforth.1 $(man1dir) + for i in $(srcdir)/gforth.info*; do $(INSTALL_DATA) $$i $(infodir); done + for i in $(FORTH_SRC) primitives; do \ + $(INSTALL_DATA) $(srcdir)/$$i $(datadir)/gforth/$(VERSION); \ done - + $(INSTALL_DATA) kernel.fi $(libdir)/gforth/$(VERSION) + $(RM) gforth.fi; $(MAKE) gforth.fi #gforth.fi contains some path names + sed s:^$(srcdir)/:$(datadir)/gforth/$(VERSION)/: gforth.TAGS >TAGS; $(INSTALL_DATA) TAGS $(datadir)/gforth/$(VERSION) + if test -d $(emacssitelispdir); then \ + $(INSTALL_DATA) $(srcdir)/gforth.el $(emacssitelispdir); \ + else \ + echo ">>>>>Please install $(srcdir)/gforth.el in your .../emacs/site-lisp directory"; \ + fi + echo ">>>>> Please make an entry for Gforth in your info dir file; e.g.:"; \ + echo "* Gforth: (gforth). A fast interpreter for the Forth language." + +install-strip: install + +installdirs: mkinstalldirs + $(srcdir)/mkinstalldirs $(bindir) $(man1dir) $(infodir) $(libdir)/gforth/$(VERSION) $(datadir)/gforth/$(VERSION) $(libdir)/gforth/site-forth $(datadir)/gforth/site-forth + +#deinstall all files specific to this version of gforth +#to uninstall version foo, type `make uninstall VERSION=foo' +uninstall: + -$(RM) -rf $(libdir)/gforth/$(VERSION) $(datadir)/gforth/$(VERSION) $(bindir)/gforth-$(VERSION) + @echo -e "Type\n$(RM) -rf $(bindir)/gforth $(man1dir)/gforth.1 $(infodir)/gforth.info* $(datadir)/gforth $(libdir)/gforth\nto remove Gforth completely" + +check test: gforth gforth.fi + $(FORTH) tester.fs coretest.fs postponetest.fs dbltest.fs -e bye + $(FORTH) code.fs checkans.fs -e bye + @echo 'Expect no differences' + $(FORTH) -m 100000 prims2x.fs -e "s\" $(srcdir)/primitives.b\" ' output-c process-file bye"| diff -c - $(srcdir)/primitives.i + +bench: gforth gforth.fi + @echo 'Each benchmark takes about 30s on a 486-66 (gcc-2.6.3 -DFORCE_REG)' + time $(FORTH) siev.fs -e "main bye" + time $(FORTH) bubble.fs -e "main bye" + time $(FORTH) -m 160000 matrix.fs -e "main bye" + time $(FORTH) fib.fs -e "main bye" + dvi: gforth.dvi -gforth: $(OBJECTS) +gforth: $(OBJECTS) -$(CP) gforth gforth~ $(GCC) $(LDFLAGS) $(OBJECTS) $(LDLIBS) -o $@ @MAKE_EXE@ -kernl16l.fi: main.fs search-order.fs cross.fs aliases.fs vars.fs add.fs \ - errore.fs kernal.fs extend.fs tools.fs toolsext.fs \ - mach16l.fs $(FORTH_GEN) - -$(CP) kernl16l.fi kernl16l.fi~ - $(FORTH) -e 's" mach16l.fs"' main.fs - @LINK_KERNL16L@ +kernl16l.fi-: $(KERN_SRC) version.fs mach16l.fs $(FORTH_GEN0) + $(FORTHK) -e 's" mach16l.fs"' main.fs -e "save-cross kernl16l.fi- $(bindir)/gforth-$(VERSION) bye" + +kernl16b.fi-: $(KERN_SRC) version.fs mach16b.fs $(FORTH_GEN0) + $(FORTHK) -e 's" mach16b.fs"' main.fs -e "save-cross kernl16b.fi- $(bindir)/gforth-$(VERSION) bye" + +kernl32l.fi-: $(KERN_SRC) version.fs mach32l.fs $(FORTH_GEN0) + $(FORTHK) -e 's" mach32l.fs"' main.fs -e "save-cross kernl32l.fi- $(bindir)/gforth-$(VERSION) bye" + +kernl32b.fi-: $(KERN_SRC) version.fs mach32b.fs $(FORTH_GEN0) + $(FORTHK) -e 's" mach32b.fs"' main.fs -e "save-cross kernl32b.fi- $(bindir)/gforth-$(VERSION) bye" + +kernl64l.fi-: $(KERN_SRC) version.fs mach64l.fs $(FORTH_GEN0) + $(FORTHK) -e 's" mach64l.fs"' main.fs -e "save-cross kernl64l.fi- $(bindir)/gforth-$(VERSION) bye" + +kernl64b.fi-: $(KERN_SRC) version.fs mach64b.fs $(FORTH_GEN0) + $(FORTHK) -e 's" mach64b.fs"' main.fs -e "save-cross kernl64b.fi- $(bindir)/gforth-$(VERSION) bye" -kernl16b.fi: main.fs search-order.fs cross.fs aliases.fs vars.fs add.fs \ - errore.fs kernal.fs extend.fs tools.fs toolsext.fs \ - mach16b.fs $(FORTH_GEN) +kernl16b.fi: $(KERNLS) -$(CP) kernl16b.fi kernl16b.fi~ - $(FORTH) -e 's" mach16b.fs"' main.fs + -$(CP) kernl16b.fi- kernl16b.fi @LINK_KERNL16B@ -kernl32l.fi: main.fs search-order.fs cross.fs aliases.fs vars.fs add.fs \ - errore.fs kernal.fs extend.fs tools.fs toolsext.fs \ - mach32l.fs $(FORTH_GEN) - -$(CP) kernl32l.fi kernl32l.fi~ - $(FORTH) -e 's" mach32l.fs"' main.fs - @LINK_KERNL32L@ +kernl16l.fi: $(KERNLS) + -$(CP) kernl16l.fi kernl16l.fi~ + -$(CP) kernl16l.fi- kernl16l.fi + @LINK_KERNL16L@ -kernl32b.fi: main.fs search-order.fs cross.fs aliases.fs vars.fs add.fs \ - errore.fs kernal.fs extend.fs tools.fs toolsext.fs \ - mach32b.fs $(FORTH_GEN) +kernl32b.fi: $(KERNLS) -$(CP) kernl32b.fi kernl32b.fi~ - $(FORTH) -e 's" mach32b.fs"' main.fs + -$(CP) kernl32b.fi- kernl32b.fi @LINK_KERNL32B@ -kernl64l.fi: main.fs search-order.fs cross.fs aliases.fs vars.fs add.fs \ - errore.fs kernal.fs extend.fs tools.fs toolsext.fs \ - mach64l.fs $(FORTH_GEN) - -$(CP) kernl64l.fi kernl64l.fi~ - $(FORTH) -e 's" mach64l.fs"' main.fs - @LINK_KERNL64L@ +kernl32l.fi: $(KERNLS) + -$(CP) kernl32l.fi kernl32l.fi~ + -$(CP) kernl32l.fi- kernl32l.fi + @LINK_KERNL32L@ -kernl64b.fi: main.fs search-order.fs cross.fs aliases.fs vars.fs add.fs \ - errore.fs kernal.fs extend.fs tools.fs toolsext.fs \ - mach64b.fs $(FORTH_GEN) +kernl64b.fi: $(KERNLS) -$(CP) kernl64b.fi kernl64b.fi~ - $(FORTH) -e 's" mach64b.fs"' main.fs + -$(CP) kernl64b.fi- kernl64b.fi @LINK_KERNL64B@ -engine.s: engine.c primitives.i prim_labels.i machine.h $(INCLUDES) - $(GCC) $(CFLAGS) $(ENGINE_FLAGS) -S engine.c +kernl64l.fi: $(KERNLS) + -$(CP) kernl64l.fi kernl64l.fi~ + -$(CP) kernl64l.fi- kernl64l.fi + @LINK_KERNL64L@ + +gforth.fi: @kernel_fi@ gforth $(GFORTH_FI_SRC) + $(FORTHK) --clear-dictionary $(FORTHSIZES) startup.fs -e "savesystem gforth.fi1 bye" + $(FORTHK) --clear-dictionary --offset-image $(FORTHSIZES) startup.fs -e "savesystem gforth.fi2 bye" + $(FORTHK) -m 100000 startup.fs comp-image.fs -e "comp-image gforth.fi1 gforth.fi2 gforth.fi bye" + +#TAGS is a GNU standard target +TAGS: gforth.TAGS + $(CP) gforth.TAGS $@ + +gforth.TAGS: @kernel_fi@ gforth $(GFORTH_FI_SRC) primitives.TAGS + $(FORTHK) etags.fs startup.fs -e bye + cat TAGS primitives.TAGS kernel.TAGS >gforth.TAGS + rm TAGS -engine.o: engine.c primitives.i prim_labels.i machine.h $(INCLUDES) - $(GCC) $(CFLAGS) $(ENGINE_FLAGS) -c engine.c +engine.s: engine.c primitives.i prim_labels.i machine.h threading.h $(INCLUDES) config.h + $(GCC) $(CFLAGS) $(ENGINE_FLAGS) -S $(srcdir)/engine.c + +engine.o: engine.c primitives.i prim_labels.i machine.h threading.h $(INCLUDES) config.h + $(GCC) $(CFLAGS) $(ENGINE_FLAGS) -c $(srcdir)/engine.c + +main.o: main.c machine.h threading.h $(INCLUDES) config.h version.h + $(GCC) $(CFLAGS) $(ENGINE_FLAGS) -c $(srcdir)/main.c strtoul.o: strtoul.c strtol.c primitives.b: primitives - m4 primitives >$@ + m4 -s $(srcdir)/primitives >$@ primitives.i : primitives.b prims2x.fs - $(FORTH) prims2x.fs -e "s\" primitives.b\" ' output-c process-file bye" >$@ + $(FORTHK) prims2x.fs -e "s\" primitives.b\" ' output-c process-file bye" >$@ prim_labels.i : primitives.b prims2x.fs - $(FORTH) prims2x.fs -e "s\" primitives.b\" ' output-label process-file bye" >$@ + $(FORTHK) prims2x.fs -e "s\" primitives.b\" ' output-label process-file bye" >$@ -aliases.fs: primitives.b prims2x.fs - $(FORTH) prims2x.fs -e "s\" primitives.b\" ' output-alias process-file bye" >$@ +aliases.fs: primitives.b prims2x.fs aliases0.fs + $(CP) aliases0.fs aliases.fs + $(FORTHK) prims2x.fs -e "s\" primitives.b\" ' output-alias process-file bye" >>$@ primitives.fs: primitives.b prims2x.fs - $(FORTH) prims2x.fs -e "s\" primitives.b\" ' output-forth process-file bye" >$@ + $(FORTHK) prims2x.fs -e "s\" primitives.b\" ' output-forth process-file bye" >$@ + +primitives.TAGS: primitives.b prims2x.fs + $(FORTHK) prims2x.fs -e "s\" $(srcdir)/primitives.b\" ' output-tag process-file bye" >$@ + +doc.fd: makedoc.fs float.fs search-order.fs glocals.fs environ.fs \ + toolsext.fs wordinfo.fs \ + vt100.fs colorize.fs see.fs bufio.fs debug.fs history.fs \ + doskey.fs vt100key.fs startup.fs assert.fs debugging.fs code.fs + $(FORTHK) -e "s\" doc.fd\"" makedoc.fs startup.fs code.fs -e bye + +crossdoc.fd: $(KERN_SRC) version.fs $(FORTH_GEN0) + $(FORTHK) -e 's" mach32l.fs"' main.fs -e bye + +gforth.texi: gforth.ds primitives.b ds2texi.fs prims2x.fs doc.fd crossdoc.fd + $(FORTHK) -m 100000 ds2texi.fs prims2x.fs -e "s\" $(srcdir)/primitives.b\" ' register-doc process-file" crossdoc.fd doc.fd -e "s\" $(srcdir)/gforth.ds\" r/o open-file throw ds2texi bye" >$@ -gforth.texi: gforth.ds primitives.b ds2texi.fs prims2x.fs - $(FORTH) ds2texi.fs >$@ +checkdoc: gforth.ds primitives.b ds2texi.fs prims2x.fs doc.fd crossdoc.fd answords.fs + $(FORTHK) ds2texi.fs answords.fs -e bye -gforth.dvi: gforth.texi +dvi: gforth.dvi + +gforth.dvi gforth.fns: gforth.texi $(TEXI2DVI) gforth.texi gforth.ps: gforth.dvi $(DVI2PS) gforth.dvi -o $@ +info: gforth.info + gforth.info: gforth.texi -$(MAKEINFO) gforth.texi +html: gforth.texi + -$(RM) html/* + -mkdir html + cd html; $(TEXI2HTML) -menu -split_node ../gforth.texi + +doc: gforth.ps html + # For an explanation of the following Makefile rules, see node # `Automatic Remaking' in GNU Autoconf documentation. -Makefile: Makefile.in config.status - CONFIG_FILES=$@ CONFIG_HEADERS= ./config.status -config.status: configure - ./config.status --recheck -configure: configure.in - cd $(srcdir) && autoconf - -#unnecessary and does not work with all makes -#%.s : %.c $(INCLUDES) -# $(CC) $(CFLAGS) -S $< -o $@ +$(srcdir)/configure: configure.in + cd $(srcdir) && autoconf -#%.o : %.s -# $(CC) $(CFLAGS) -c $< -o $@ +# autoheader might not change config.h.in, so touch a stamp file. +$(srcdir)/config.h.in: stamp-h.in +$(srcdir)/stamp-h.in: configure.in acconfig.h + cd $(srcdir) && autoheader + echo timestamp > $(srcdir)/stamp-h.in + +config.h: stamp-h +stamp-h: config.h.in config.status + CONFIG_FILES=$@ CONFIG_HEADERS=config.h ./config.status + echo > stamp-h +Makefile: Makefile.in config.status + CONFIG_FILES=$@ CONFIG_HEADERS=config.h ./config.status + +config.status: configure + ./config.status --recheck + + +#create files for DOS, because DOS cannot do it itself +makefile.dos: mkdosmf.sed Makefile.in + sed -f mkdosmf.sed makefile.dos + +makefile.os2: mkos2mf.sed Makefile.in + sed -f mkos2mf.sed makefile.os2 + echo '%.o: %.c' >>makefile.os2 + echo ' $$(GCC) $$(CFLAGS) -c $$<' >>makefile.os2 + +history.dos: history.fs Makefile.in + sed -e "s,~/\.gforth-history,/gforth.his,g" history.dos + +startup.dos: startup.fs Makefile.in + sed -e "s/\\\\ include doskey/include doskey/g" \ + -e "s/include vt100key/\\\\ include vt100key/g" startup.dos