--- gforth/Makefile.in 1995/12/26 17:35:34 1.51 +++ gforth/Makefile.in 1998/12/19 23:15:07 1.131 @@ -1,6 +1,6 @@ #Makefile for Gforth -#Copyright (C) 1995 Free Software Foundation, Inc. +#Copyright (C) 1995,1996,1997,1998 Free Software Foundation, Inc. #This file is part of Gforth. @@ -23,41 +23,75 @@ # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. -#To do: -#use $(srcdir) to make compilation in a non-srcdir possible +# Warning: +# For some stupid reason setting SHELL to bash does not work properly with +# DOS. If you want to use shell-specific things that must run with DOS make +# an external batch file and call it with bash (see versions.bsh). + +# ------------- gforth version + +VERSION = @VERSION@ +DOSVERSION=`echo $(VERSION)|sed 's/\.//g'` + +# ------------- System specific variables + +machine=@machine@ +kernel_fi=@kernel_fi@ +EXE=@EXE@ + +# this is the type of machine +# used to extend the include path with ./arch/$machine +# so we can include a machine specific +# machine.h file + +PATHSEP = @PATHSEP@ + +osclass = @OSCLASS@ + +# ------------- Utility programs -VERSION =0.2.0#gforth version SHELL = /bin/sh RM = rm +RMTREE = rm -rf CP = cp +MV = mv +TAR = tar cf - INSTALL = @INSTALL@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_DATA = @INSTALL_DATA@ -INSTALL_DIR = ./install-sh -d LN_S = @LN_S@ GCC = @CC@ CC = $(GCC) -FORTH = ./gforth -FORTHK = $(FORTH) -i ./kernal.fi +FORTHPATH = .$(PATHSEP)$(libdir)/gforth/site-forth$(PATHSEP)$(datadir)/gforth/site-forth$(PATHSEP)$(libdir)/gforth/$(VERSION)$(PATHSEP)$(datadir)/gforth/$(VERSION) +FORTHSIZES = @FORTHSIZES@ +FORTH = ./gforth --die-on-signal -p $(FORTHPATH)$(PATHSEP)$(srcdir) +FORTHKFLAGS= --die-on-signal -p .$(PATHSEP)$(srcdir) -i ./$(kernel_fi) +FORTHK = ./gforth $(FORTHKFLAGS) +FORTHP = ./gforth --die-on-signal -i ./$(kernel_fi) STRIP = strip TEXI2DVI = texi2dvi -DVI2PS = dvips -D300 -#you can get texi2html from http://asis01.cern.ch/infohtml/texi2html.html +DVI2PS = dvips -Z +#you can get texi2html from http://wwwcn.cern.ch/dci/texi2html/ TEXI2HTML = texi2html MAKEINFO = makeinfo + +# ------------- Compiler Flags + XCFLAGS = @CFLAGS@ XDEFINES = @DEFS@ SWITCHES = $(XCFLAGS) $(XDEFINES) #-DNDEBUG #turn off assertions ENGINE_FLAGS = @ENGINE_FLAGS@ -fno-defer-pop -fcaller-saves DEBUGFLAG = @DEBUGFLAG@ -CFLAGS = $(DEBUGFLAG) -O4 -Wall $(SWITCHES) -DDEFAULTPATH=\"$(libdir)/gforth/site-forth:$(datadir)/gforth/site-forth:$(libdir)/gforth/$(VERSION):$(datadir)/gforth/$(VERSION):.\" +CFLAGS = $(DEBUGFLAG) -I$(srcdir)/engine -I$(srcdir)/arch/$(machine) -O4 -Wall $(SWITCHES) -DDEFAULTPATH=\"$(FORTHPATH)\" #John Wavrik should use -Xlinker -N to get a writable text (executable) XLDFLAGS = @LDFLAGS@ -GCCLDFLAGS = @GCCLDFLAGS@ -LDFLAGS = $(DEBUGFLAG) $(XLDFLAGS) $(GCCLDFLAGS) +LDFLAGS = $(DEBUGFLAG) $(XLDFLAGS) LDLIBS = @LIBS@ +# ------------ Install Directorys + +VPATH = @srcdir@ prefix = @prefix@ exec_prefix = @exec_prefix@ srcdir = @srcdir@ @@ -67,80 +101,255 @@ datadir = $(prefix)/share #read-only architecture-dependent non-ascii files libdir = $(prefix)/lib infodir = $(prefix)/info -mandir = $(prefix)/man/man1 - - -INCLUDES = forth.h threading.h io.h io-dos.h config.h - -KERN_SRC = main.fs search-order.fs cross.fs aliases.fs vars.fs add.fs \ - errore.fs kernal.fs version.fs extend.fs tools.fs toolsext.fs - -GFORTH_FI_SRC = startup.fs glocals.fs search-order.fs hash.fs float.fs \ - debugging.fs environ.fs wordinfo.fs look.fs vt100.fs see.fs \ - bufio.fs debug.fs history.fs vt100key.fs assert.fs source.fs \ - blocks.fs struct.fs dumpimage.fs - -FORTH_SRC = anslocal.fs add.fs assert.fs ansi.fs answords.fs blocks.fs bufio.fs checkans.fs \ - code.fs colorize.fs cross.fs debug.fs debugging.fs doskey.fs ds2texi.fs \ - dumpimage.fs environ.fs errore.fs etags.fs extend.fs filedump.fs \ - float.fs glocals.fs glosgen.fs gray.fs hash.fs history.fs \ - kernal.fs locals-test.fs look.fs main.fs makedoc.fs \ +mandir = $(prefix)/man +man1dir= $(mandir)/man1 +man1ext= .1 +#older emacses have their site-lisp in $(libdir)/emacs/ +emacssitelispdir=@lispdir@ + +CVSDIRS = CVS engine/CVS kernel/CVS doc/CVS asm/CVS ec/CVS test/CVS \ + compat/CVS \ + arch/CVS arch/generic/CVS arch/m68k/CVS arch/mips/CVS \ + arch/386/CVS arch/hppa/CVS arch/sparc/CVS arch/power/CVS \ + arch/alpha/CVS arch/4stack/CVS arch/misc/CVS arch/6502/CVS \ + arch/8086/CVS arch/avr/CVS arch/c165/CVS arch/h8/CVS \ + arch/shboom/CVS \ + +INCLUDES = engine/forth.h engine/threaded.h engine/io.h + +KERN_SRC = \ + kernel/aliases0.fs \ + kernel/aliases.fs \ + kernel/args.fs \ + chains.fs \ + kernel/cond.fs \ + kernel/cond-old.fs \ + cross.fs \ + kernel/errore.fs \ + kernel/files.fs \ + kernel/require.fs \ + kernel/paths.fs \ + kernel/kernel.fs \ + kernel/main.fs \ + kernel/prim0.fs \ + search.fs \ + kernel/special.fs \ + kernel/tools.fs \ + kernel/toolsext.fs \ + kernel/vars.fs \ + kernel/accept.fs \ + kernel/basics.fs \ + kernel/int.fs \ + kernel/comp.fs \ + kernel/io.fs \ + kernel/license.fs \ + kernel/nio.fs \ + kernel/saccept.fs \ + kernel/doers.fs \ + kernel/getdoers.fs + +EC_SRC = \ + asm/README \ + asm/bitmask.fs \ + asm/numref.fs \ + asm/basic.fs \ + asm/generic.fs \ + asm/target.fs \ + ec/README \ + ec/mirror.fs \ + ec/mirrors.fs \ + ec/shex.fs \ + ec/builttag.fs \ + ec/dotx.fs \ + ec/mirrored.fs \ + ec/nesting.fs + +GFORTH_FI_SRC = \ + assert.fs \ + blocked.fb \ + blocks.fs \ + bufio.fs \ + debug.fs \ + debugs.fs \ + savesys.fs \ + environ.fs \ + errors.fs \ + extend.fs \ + float.fs \ + glocals.fs \ + hash.fs \ + history.fs \ + intcomp.fs \ + locals.fs \ + look.fs \ + search.fs \ + see.fs \ + see-ext.fs \ + source.fs \ + startup.fs \ + struct.fs \ + stuff.fs \ + tasker.fs \ + termsize.fs \ + vt100.fs \ + vt100key.fs \ + wordinfo.fs \ + lib.fs \ + sieve.fs \ + add.fs + +FORTH_SRC = $(KERN_SRC) $(GFORTH_FI_SRC) $(EC_SRC) \ + ans-report.fs ansi.fs answords.fs \ + code.fs colorize.fs comp-i.fs \ + doskey.fs ds2texi.fs \ + envos.fs envos.dos envos.os2 etags.fs filedump.fs fi2c.fs \ + glosgen.fs gray.fs \ + doc/makedoc.fs \ mach16b.fs mach16l.fs mach32b.fs mach32l.fs mach64b.fs mach64l.fs \ - other.fs prims2x.fs random.fs search-order.fs see.fs sieve.fs source.fs \ - startup.fs site-init.fs struct.fs tools.fs toolsext.fs tt.fs vars.fs \ - vt100.fs vt100key.fs wordinfo.fs wordsets.fs \ - tester.fs coretest.fs \ - bubble.fs siev.fs matrix.fs fib.fs - -SOURCES = CVS Makefile.in configure.in configure config.sub config.guess \ - acconfig.h config.h.in \ - install-sh INSTALL README ToDo BUGS model COPYING Benchres \ - gforth.ds texinfo.tex gforth.1 gforth.el \ - primitives engine.c main.c io.c \ - m68k.h mips.h 386.h hppa.h cache.c sparc.h power.h alpha.h 32bit.h \ - getopt.c getopt1.c getopt.h select.c \ - ecvt.c memcmp.c strtol.c strtoul.c ansidecl.h memmove.c pow10.c \ - strerror.c strsignal.c \ - INSTALL.DOS makefile.dos mkdosmf.sed configure.bat \ - startup.dos history.dos \ - glosgen.glo glossaries.doc \ - $(INCLUDES) $(FORTH_SRC) + machpc.fs more.fs other.fs prims2x.fs random.fs \ + siteinit.fs table.fs \ + tt.fs sokoban.fs \ + unbuffered.fs wordsets.fs \ + test/tester.fs test/coretest.fs test/postpone.fs test/dbltest.fs \ + test/other.fs test/checkans.fs \ + bubble.fs siev.fs matrix.fs fib.fs \ + oof.fs oofsampl.fs objects.fs objexamp.fs mini-oof.fs moof-exm.fs + +COMPAT = compat/README \ + compat/anslocal.fs \ + compat/assert.fs \ + compat/control.fs \ + compat/defer.fs \ + compat/exception.fs \ + compat/loops.fs \ + compat/required.fs \ + compat/struct.fs \ + compat/vocabulary.fs + +GFORTH_TEXI = doc/gforth.texi doc/version.texi + +ALLSUBDIRS = engine + +ARCHS = \ + arch/generic/machine.h \ + arch/m68k/machine.h \ + arch/mips/machine.h \ + arch/386/machine.h \ + arch/hppa/machine.h \ + arch/hppa/cache.c \ + arch/sparc/machine.h \ + arch/power/machine.h \ + arch/power/_sync_cache_range.c \ + arch/alpha/machine.h \ + arch/4stack/README \ + arch/4stack/asm.fs \ + arch/4stack/mach.fs \ + arch/4stack/prim.fs \ + arch/4stack/mach.sh \ + arch/4stack/relocate.fs \ + arch/misc/README \ + arch/misc/asm.fs \ + arch/misc/mach.fs \ + arch/misc/prim.fs \ + arch/misc/sim.fs \ + arch/misc/sokoban.fs \ + arch/misc/tt.fs \ + arch/6502/asm.fs \ + arch/6502/prim.fs \ + arch/6502/mach.fs \ + arch/6502/zero.fs \ + arch/6502/softuart.fs \ + arch/6502/cold.fs \ + arch/8086/asm.fs \ + arch/8086/mach.fs \ + arch/8086/mach.sh \ + arch/8086/prim.fs \ + arch/avr/asm.fs \ + arch/c165/asm.fs \ + arch/c165/mach.fs \ + arch/c165/prim.fs \ + arch/h8/asm.fs \ + arch/shboom/asm.fs \ + arch/shboom/compiler.fs \ + arch/shboom/dis.fs \ + arch/shboom/mach.fs \ + arch/shboom/prim.fs \ + arch/shboom/dis2.fs \ + arch/shboom/sh.p \ + arch/shboom/doers.fs + +SOURCES = $(CVSDIRS) compat Makefile.in engine/Makefile.in gforthmi.in \ + configure.in configure config.sub config.guess elisp-comp missing \ + acconfig.h acinclude.m4 engine/config.h.in stamp-h.in \ + install-sh INSTALL INSTALL.BINDIST NEWS README ToDo BUGS model \ + COPYING AUTHORS ChangeLog Benchres aclocal.m4 \ + doc/gforth.ds doc/texinfo.tex doc/gforth.1 doc/version.texi.in \ + gforth.el \ + prim engine/engine.c engine/main.c engine/io.c engine/memcmpc.c \ + $(ARCHS) \ + engine/getopt.c engine/getopt1.c engine/getopt.h engine/select.c \ + engine/ecvt.c engine/memcmp.c engine/strtol.c engine/strtoul.c \ + engine/ansidecl.h engine/memmove.c \ + engine/pow10.c engine/atanh.c engine/cleanalign.c \ + engine/strerror.c engine/strsignal.c engine/dblsub.c \ + INSTALL.DOS makefile.dos engine/makefile.dos mkdosmf.sed config.bat \ + dosconf.h gforthmi.bat mkinstalldirs \ + versions.bsh \ + configure.cmd mkos2mf.sed os2conf.h makefile.os2 engine/makefile.os2 \ + gforthmi.cmd glosgen.glo doc/glossaries.doc \ + $(INCLUDES) $(FORTH_SRC) $(COMPAT) \ + timings.sc RCS_FILES = ToDo model high-level -GEN = gforth version.fs - -OBJECTS = engine.o io.o main.o @LIBOBJS@ @getopt_long@ +GEN = gforth$(EXE) gforth-ditc$(EXE) kernel/version.fs version-stamp # things that need a working forth system to be generated -FORTH_GEN0 = primitives.b primitives.i prim_labels.i aliases.fs -FORTH_GEN = $(FORTH_GEN0) @KERNAL@ gforth.fi +FORTH_GEN0 = prim.b engine/prim.i engine/prim_lab.i kernel/aliases.fs kernel/prim.fs +FORTH_GEN = $(FORTH_GEN0) @KERNEL@ gforth.fi # this is used for antidependences, -FORTH_GEN1 = $(FORTH_GEN0) @kernal_fi@ +FORTH_GEN1 = $(FORTH_GEN0) @kernel_fi@ #distributed documentation -DOCDIST = gforth.texi gforth.fns gforth.ps gforth.info* +DOCDIST = doc/gforth.info doc/gforth.info-* doc/gforth.txt doc/gforth.ps + +#stuff in a binonly distribution +BINONLYDIST = config.status Makefile gforth$(EXE) gforth-ditc$(EXE) \ + $(OBJECTS0) $(OBJECTS) $(OBJECTS_DITC)\ + arch/$(machine)/machine.h engine/config.h engine/Makefile \ + stamp-h kernel/version.fs version-stamp \ + INSTALL.BINDIST KERNLS = kernl16b.fi- kernl16l.fi- \ kernl32b.fi- kernl32l.fi- \ kernl64b.fi- kernl64l.fi- -GEN_PRECIOUS = $(FORTH_GEN) $(KERNLS) gforth.texi gforth.dvi gforth.ps Makefile configure +GEN_PRECIOUS = $(FORTH_GEN) $(KERNLS) doc/gforth.texi doc/gforth.dvi doc/gforth.ps Makefile engine/Makefile configure #standards.info recommends this: .SUFFIXES: .SUFFIXES: .c .o -all: version.fs more -version.c: Makefile.in - echo "char gforth_version[]=\"$(VERSION)\" ;" >$@ +all: kernel/version.fs more + +# use this dependency for phony targets just as mostlyclean,... +FORCE: ; + +#this rule avoids remaking everything after minor changes in Makefile.in +version: Makefile.in + if test -r $@ && test x'$(VERSION)' = x`cat $@` ; then true ; else echo $(VERSION) > $@ ; fi -version.fs: Makefile.in - $(MAKE) gforth - echo ": version-string s\" $(VERSION)\" ;" >$@ +# With dos we use normal dos echo +# we cannot pipe the output to engine/version.h directly because +# of the "/ and \" problem. Copying works because we use the +# shell und file utilities. -more: $(FORTH_GEN) gforth +kernel/version.fs: version + $(MAKE) gforth$(EXE) + echo ": version-string s\" $(VERSION)\" ;" > kernel/version.fs + +more: engine $(FORTH_GEN) gforth$(EXE) #from the gcc Makefile: #"Deletion of files made during compilation. @@ -153,42 +362,93 @@ more: $(FORTH_GEN) gforth # `distclean' also deletes the files made by config. # `realclean' also deletes everything that could be regenerated automatically." -mostlyclean: - -$(RM) -rf *.s gforth.fi *.fi~ *.fi- version.fs TAGS \ - crossdoc.fd doc.fd gforth.aux gforth.cp gforth.cps \ - gforth.dvi gforth.fn gforth.ky gforth.log gforth.pg \ - gforth.toc gforth.tp gforth.vr html +mostlyclean: FORCE + -$(RM) -rf engine/*.s gforth.fi *.fi~ *.fi- kernel/version.fs \ + *TAGS gforth~ \ + doc/crossdoc.fd doc/doc.fd doc/gforth.texi doc/gforth.fns \ + doc/gforth.aux doc/gforth.cp doc/gforth.cps \ + doc/gforth.dvi doc/gforth.fn doc/gforth.ky doc/gforth.log \ + doc/gforth.pg \ + doc/gforth.toc doc/gforth.tp doc/gforth.vr html \ + gforth-$(VERSION).tar.gz clean: mostlyclean - -$(RM) -rf $(GEN) *.o + -$(RM) -rf $(GEN) engine/gforth$(EXE) engine/gforth-ditc$(EXE) \ + *.o engine/*.o arch/*/*.o version distclean: clean - -$(RM) machine.h kernal.fi config.cache config.log config.status config.h Makefile - -realclean: distclean - -$(RM) $(GEN_PRECIOUS) + -$(RM) config.cache config.log config.status \ + engine/config.h Makefile engine/Makefile \ + stamp-h engine/stamp-h \ + doc/version.texi gforthmi + +#realclean is useless, but dangerous, so it's commented out +#realclean: distclean +# -$(RM) $(GEN_PRECIOUS) #mostlyclean, but also remove some of the stuff that is distributed virtualclean: mostlyclean -$(RM) -rf gforth.fns gforth.texi gforth.ps gforth.info* \ - gforth-$(VERSION).tar.gz config.cache *~ *TAGS + gforth-$(VERSION).tar.gz config.cache *~ */*~ + +#use dist targets only when srcdir=. +dist: $(SOURCES) $(FORTH_GEN0) @KERNEL@ $(DOCDIST) + -$(RMTREE) gforth-$(VERSION) + mkdir gforth-$(VERSION) + $(TAR) $(SOURCES) $(FORTH_GEN0) @KERNEL@ $(DOCDIST) | \ + (cd gforth-$(VERSION); tar xf -) + $(TAR) gforth-$(VERSION)|gzip -9 >gforth-$(VERSION).tar.gz + -$(RMTREE) gforth-$(VERSION) + +#use dist targets only when srcdir=. +dosdist: $(SOURCES) $(FORTH_GEN0) @KERNEL@ $(DOCDIST) + -$(RMTREE) gforth.$(DOSVERSION) + mkdir gforth.$(DOSVERSION) + $(TAR) $(SOURCES) $(FORTH_GEN0) @KERNEL@ $(DOCDIST) | \ + (cd gforth.$(DOSVERSION); tar xf -) + $(MV) gforth.$(DOSVERSION)/engine/strsignal.c gforth.$(DOSVERSION)/engine/strsig.c + for i in 1 2 3 4 5 6 7 8; do \ + $(MV) gforth.$(DOSVERSION)/doc/gforth.info-$$i gforth.$(DOSVERSION)/doc/gforth.i$$i; \ + done + zip -r9 gf$(DOSVERSION)dos.zip gforth.$(DOSVERSION)/* + -$(RMTREE) gforth.$(DOSVERSION) + +#A source distribution contains only the things needed to install gforth, +#without the documents. +srcdist: $(SOURCES) $(FORTH_GEN0) @KERNEL@ + -$(RMTREE) gforth-$(VERSION) + mkdir gforth-$(VERSION) + $(TAR) $(SOURCES) $(FORTH_GEN0) @KERNEL@ | \ + (cd gforth-$(VERSION); tar xf -) + $(TAR) gforth-$(VERSION)|gzip -9 >gforth-src-$(VERSION).tar.gz + -$(RMTREE) gforth-$(VERSION) -dist: $(SOURCES) $(FORTH_GEN) $(DOCDIST) - -rm -rf gforth-$(VERSION) +srconlydist: $(SOURCES) + -$(RMTREE) gforth-$(VERSION) + mkdir gforth-$(VERSION) + $(TAR) $(SOURCES) | \ + (cd gforth-$(VERSION); tar xf -) + $(TAR) gforth-$(VERSION)|gzip -9 >gforth-srconly-$(VERSION).tar.gz + -$(RMTREE) gforth-$(VERSION) + +#A document distribution contains only the documents, which can be created +#with MAKE. +docdist: $(DOCDIST) + -$(RMTREE) gforth-$(VERSION) mkdir gforth-$(VERSION) - $(CP) -rp $(SOURCES) $(FORTH_GEN0) @KERNAL@ $(DOCDIST) gforth-$(VERSION) - tar cvf - gforth-$(VERSION)|gzip -9 >gforth-$(VERSION).tar.gz - -rm -rf gforth-$(VERSION) + $(TAR) $(DOCDIST) | (cd gforth-$(VERSION); tar xf -) + $(TAR) gforth-$(VERSION)|gzip -9 >gforth-doc-$(VERSION).tar.gz + -$(RMTREE) gforth-$(VERSION) #a binary distribution contains the complete source distribution, # the objects, the executable and the links. the objects are there for making # make happy. -bindist: $(SOURCES) $(FORTH_GEN) gforth $(OBJECTS) config.status Makefile - -rm -rf gforth-$(VERSION) +bindist: $(SOURCES) $(FORTH_GEN0) @KERNEL@ $(DOCDIST) $(BINONLYDIST) + -$(RMTREE) gforth-$(VERSION) mkdir gforth-$(VERSION) - $(CP) -rp -d $(SOURCES) config.status Makefile $(FORTH_GEN) gforth $(OBJECTS) machine.h kernal.fi gforth-$(VERSION) + $(TAR) $(SOURCES) $(FORTH_GEN0) @KERNEL@ $(DOCDIST) $(BINONLYDIST) | (cd gforth-$(VERSION); tar xf -) strip gforth-$(VERSION)/gforth - tar cvf - gforth-$(VERSION)|gzip -9 >gforth-$(VERSION)-@host@.tar.gz + $(TAR) gforth-$(VERSION)|gzip -9 >gforth-$(VERSION)-@host@.tar.gz #makes a package with only the stuff not present in the source #package. For installation the source package is still needed! @@ -197,207 +457,289 @@ bindist: $(SOURCES) $(FORTH_GEN) gforth #all the binonly packages you are interested in on the disk. The user #then just has to unpack the source and his favourite binonly into the #same directory and has a full binary distribution. -binonlydist: $(SOURCES) $(FORTH_GEN) gforth $(OBJECTS) - -rm -rf gforth-$(VERSION) +binonlydist: $(SOURCES) $(FORTH_GEN0) @KERNEL@ $(DOCDIST) $(BINONLYDIST) + -$(RMTREE) gforth-$(VERSION) mkdir gforth-$(VERSION) - $(CP) -p -d config.status Makefile gforth $(OBJECTS) machine.h kernal.fi gforth-$(VERSION) + $(TAR) $(BINONLYDIST) | (cd gforth-$(VERSION); tar xf -) strip gforth-$(VERSION)/gforth - tar cvf - gforth-$(VERSION)|gzip -9 >gforth-$(VERSION)-binonly-@host@.tar.gz - + $(TAR) gforth-$(VERSION)|gzip -9 >gforth-$(VERSION)-binonly-@host@.tar.gz #strip gforth, because the debugging stuff is hardly useful once # gforth manages to execute more than a few primitives -install: gforth $(FORTH_SRC) kernal.fi gforth.fi gforth.1 gforth.info* primitives gforth.TAGS - for i in $(bindir) $(mandir) $(infodir) $(libdir)/gforth/$(VERSION) $(datadir)/gforth/$(VERSION) $(libdir)/gforth/site-forth $(datadir)/gforth/site-forth; do \ - $(INSTALL_DIR) $$i; \ +#install does not depend on gforth.info, because that would require +#supplying a lot of files that can be easily generated (only info is +#hard to generate) +install: gforth$(EXE) $(FORTH_SRC) $(kernel_fi) gforth.fi gforthmi doc/gforth.1 prim install.TAGS installdirs + touch $(datadir)/gforth/site-forth/siteinit.fs + -$(RM) $(bindir)/gforth$(EXE) $(bindir)/gforth-$(VERSION)$(EXE) + $(INSTALL_PROGRAM) -s gforth$(EXE) $(bindir)/gforth-$(VERSION)$(EXE) + $(LN_S) $(bindir)/gforth-$(VERSION)$(EXE) $(bindir)/gforth$(EXE) + $(INSTALL_PROGRAM) gforthmi $(bindir)/gforthmi-$(VERSION) + $(LN_S) $(bindir)/gforthmi-$(VERSION) $(bindir)/gforthmi + -$(INSTALL_DATA) $(srcdir)/doc/gforth.1 $(man1dir) + -for i in $(srcdir)/doc/gforth.info*; do $(INSTALL_DATA) $$i $(infodir); done + for i in $(FORTH_SRC) $(COMPAT) prim; do \ + $(INSTALL_DATA) $(srcdir)/$$i $(datadir)/gforth/$(VERSION)/$$i; \ done - touch $(datadir)/gforth/site-forth/site-init.fs - -$(RM) $(bindir)/gforth $(bindir)/gforth-$(VERSION) - $(INSTALL_PROGRAM) -s gforth $(bindir) - ln $(bindir)/gforth $(bindir)/gforth-$(VERSION) - $(INSTALL_DATA) gforth.1 $(mandir) - for i in gforth.info*; do $(INSTALL_DATA) $$i $(infodir); done - for i in $(FORTH_SRC) primitives; do \ - $(INSTALL_DATA) $$i $(datadir)/gforth/$(VERSION); \ + $(INSTALL_DATA) $(kernel_fi) $(datadir)/gforth/$(VERSION) + $(RM) gforth.fi; $(MAKE) gforth.fi #gforth.fi contains some path names + $(INSTALL_DATA) gforth.fi $(libdir)/gforth/$(VERSION) + $(INSTALL_DATA) install.TAGS $(datadir)/gforth/$(VERSION)/TAGS + @if test -d $(emacssitelispdir); then \ + $(INSTALL_DATA) $(srcdir)/gforth.el $(emacssitelispdir); \ + else \ + echo ">>>>>Please install $(srcdir)/gforth.el in your .../emacs/site-lisp directory"; \ + fi + @echo ">>>>> Please make an entry for Gforth in your info dir file; e.g.:"; \ + echo "* Gforth: (gforth). A fast interpreter for the Forth language." + +install-strip: install + +installdirs: mkinstalldirs + $(srcdir)/mkinstalldirs $(bindir) $(man1dir) $(infodir) $(libdir)/gforth/$(VERSION) $(datadir)/gforth/$(VERSION) $(libdir)/gforth/site-forth $(datadir)/gforth/site-forth + for i in $(CVSDIRS); do \ + $(srcdir)/mkinstalldirs $(datadir)/gforth/$(VERSION)/`dirname $$i`; \ done - $(INSTALL_DATA) kernal.fi $(libdir)/gforth/$(VERSION) - $(FORTHK) startup.fs dumpimage.fs -e "savesystem $(libdir)/gforth/$(VERSION)/gforth.fi bye" #gforth.fi contains some path names - sed s:$(srcdir)/:$(datadir)/gforth/$(VERSION): gforth.TAGS >TAGS; $(INSTALL_DATA) TAGS $(datadir)/gforth/$(VERSION) + $(RM) -rf $(datadir)/gforth/$(VERSION)/arch $(datadir)/gforth/$(VERSION)/engine #deinstall all files specific to this version of gforth #to uninstall version foo, type `make uninstall VERSION=foo' -uninstall: - -$(RM) -rf $(libdir)/gforth/$(VERSION) $(datadir)/gforth/$(VERSION) $(bindir)/gforth-$(VERSION) - @echo -e "Type\n$(RM) -rf $(bindir)/gforth $(mandir)/gforth.1 $(infodir)/gforth.info* $(datadir)/gforth $(libdir)/gforth\nto remove Gforth completely" - -check: test - touch test - -test: gforth gforth.fi - $(FORTH) tester.fs coretest.fs -e bye - $(FORTH) code.fs checkans.fs -e bye +uninstall: FORCE + -$(RM) -rf $(libdir)/gforth/$(VERSION) $(datadir)/gforth/$(VERSION) $(bindir)/gforth-$(VERSION)$(EXE) $(bindir)/gforthmi-$(VERSION) + @echo -e "To remove Gforth completely, type\n$(RM) -rf $(bindir)/gforth$(EXE) $(bindir)/gforthmi $(man1dir)/gforth.1 $(infodir)/gforth.info* $(datadir)/gforth $(libdir)/gforth" + +check test: gforth$(EXE) gforth.fi + $(FORTH) test/tester.fs test/coretest.fs test/postpone.fs test/dbltest.fs -e bye + $(FORTH) test/other.fs -e bye + @echo "Expect 'Missing: EKEY EKEY>CHAR EKEY? EMIT?'" + @echo "Expect 'Missing: EDITOR FORGET'" + $(FORTH) code.fs test/checkans.fs -e bye @echo 'Expect no differences' - $(FORTH) prims2x.fs -e "s\" primitives.b\" ' output-c process-file bye"| diff -c - primitives.i + $(FORTHK) -m 100000 prims2x.fs -e "s\" $(srcdir)/prim.b\"' output-c process-file bye"| diff -c - $(srcdir)/engine/prim.i -bench: gforth gforth.fi +bench: gforth$(EXE) gforth.fi @echo 'Each benchmark takes about 30s on a 486-66 (gcc-2.6.3 -DFORCE_REG)' time $(FORTH) siev.fs -e "main bye" time $(FORTH) bubble.fs -e "main bye" time $(FORTH) -m 160000 matrix.fs -e "main bye" time $(FORTH) fib.fs -e "main bye" -dvi: gforth.dvi +# ------------- Make forth images + +# Hot to make new images: +# 1. Produce an image called kernlXYZ.fi- +# the original kernel.fi is not touched because it's needed for creation +# 2. copy old kernlXYZ.fi to kernlXYZ.fi~ +# that's a backup copy in case the new kernels don't work +# 3. copy new kernels to kernlXYZ.fi +# these are the ones we want to use now -gforth: $(OBJECTS) - -$(CP) gforth gforth~ - $(GCC) $(LDFLAGS) $(OBJECTS) $(LDLIBS) -o $@ - @MAKE_EXE@ +kernl16l.fi-: $(KERN_SRC) kernel/version.fs mach16l.fs $(FORTH_GEN0) + $(FORTHK) -e 's" mach16l.fs"' kernel/main.fs -e "save-cross kernl16l.fi- $(bindir)/gforth-$(VERSION) bye" -kernl16l.fi-: $(KERN_SRC) mach16l.fs $(FORTH_GEN0) - $(FORTHK) -p . -e 's" mach16l.fs"' main.fs +kernl16b.fi-: $(KERN_SRC) kernel/version.fs mach16b.fs $(FORTH_GEN0) + $(FORTHK) -e 's" mach16b.fs"' kernel/main.fs -e "save-cross kernl16b.fi- $(bindir)/gforth-$(VERSION) bye" -kernl16b.fi-: $(KERN_SRC) mach16b.fs $(FORTH_GEN0) - $(FORTHK) -p . -e 's" mach16b.fs"' main.fs +kernl32l.fi-: $(KERN_SRC) kernel/version.fs mach32l.fs $(FORTH_GEN0) + $(FORTHK) -e 's" mach32l.fs"' kernel/main.fs -e "save-cross kernl32l.fi- $(bindir)/gforth-$(VERSION) bye" -kernl32l.fi-: $(KERN_SRC) mach32l.fs $(FORTH_GEN0) - $(FORTHK) -p . -e 's" mach32l.fs"' main.fs +kernl32b.fi-: $(KERN_SRC) kernel/version.fs mach32b.fs $(FORTH_GEN0) + $(FORTHK) -e 's" mach32b.fs"' kernel/main.fs -e "save-cross kernl32b.fi- $(bindir)/gforth-$(VERSION) bye" -kernl32b.fi-: $(KERN_SRC) mach32b.fs $(FORTH_GEN0) - $(FORTHK) -p . -e 's" mach32b.fs"' main.fs +kernl64l.fi-: $(KERN_SRC) kernel/version.fs mach64l.fs $(FORTH_GEN0) + $(FORTHK) -e 's" mach64l.fs"' kernel/main.fs -e "save-cross kernl64l.fi- $(bindir)/gforth-$(VERSION) bye" -kernl64l.fi-: $(KERN_SRC) mach64l.fs $(FORTH_GEN0) - $(FORTHK) -p . -e 's" mach64l.fs"' main.fs +kernl64b.fi-: $(KERN_SRC) kernel/version.fs mach64b.fs $(FORTH_GEN0) + $(FORTHK) -e 's" mach64b.fs"' kernel/main.fs -e "save-cross kernl64b.fi- $(bindir)/gforth-$(VERSION) bye" -kernl64b.fi-: $(KERN_SRC) mach64b.fs $(FORTH_GEN0) - $(FORTHK) -p . -e 's" mach64b.fs"' main.fs +kernl-%.fi: arch/%/mach.fs \ + $(KERN_SRC) kernel/version.fs $(FORTH_GEN0) + $(FORTHK) -e 's" $<"' kernel/main.fs -e "save-cross $@- $(bindir)/gforth-$(VERSION) bye" + if [ -f `echo $< | sed s/fs/sh/` ]; \ + then sh `echo $< | sed s/fs/sh/` $@; \ + else $(CP) $@- $@; \ + fi + +arch/%/mach.fs: arch/%/prim.fs + +arch/%/prim.fs: arch/%/asm.fs kernl16b.fi: $(KERNLS) -$(CP) kernl16b.fi kernl16b.fi~ -$(CP) kernl16b.fi- kernl16b.fi - @LINK_KERNL16B@ kernl16l.fi: $(KERNLS) -$(CP) kernl16l.fi kernl16l.fi~ -$(CP) kernl16l.fi- kernl16l.fi - @LINK_KERNL16L@ kernl32b.fi: $(KERNLS) -$(CP) kernl32b.fi kernl32b.fi~ -$(CP) kernl32b.fi- kernl32b.fi - @LINK_KERNL32B@ kernl32l.fi: $(KERNLS) -$(CP) kernl32l.fi kernl32l.fi~ -$(CP) kernl32l.fi- kernl32l.fi - @LINK_KERNL32L@ kernl64b.fi: $(KERNLS) -$(CP) kernl64b.fi kernl64b.fi~ -$(CP) kernl64b.fi- kernl64b.fi - @LINK_KERNL64B@ kernl64l.fi: $(KERNLS) -$(CP) kernl64l.fi kernl64l.fi~ -$(CP) kernl64l.fi- kernl64l.fi - @LINK_KERNL64L@ -gforth.fi: @kernal_fi@ gforth $(GFORTH_FI_SRC) - $(FORTHK) startup.fs -e "savesystem gforth.fi bye" +#kernl%.fi: kernl%.fi- $(KERNLS) +# -$(CP) $@ $@~ +# -$(CP) $< $@ -gforth.TAGS: @kernal_fi@ gforth $(GFORTH_FI_SRC) primitives.TAGS - $(FORTHK) etags.fs startup.fs -e bye - cat TAGS primitives.TAGS kernal.TAGS >gforth.TAGS +gforth.fi: $(kernel_fi) gforthmi gforth$(EXE) gforth-ditc$(EXE) $(GFORTH_FI_SRC) + GFORTHD="./gforth-ditc -p .$(PATHSEP)$(srcdir)" GFORTH="./gforth-ditc -p .$(PATHSEP)$(srcdir) -i $(kernel_fi) startup.fs" ./gforthmi gforth.fi $(FORTHSIZES) $(FORTHKFLAGS) startup.fs + +# ------------- Make c-engine + +prim.b: prim + m4 -s $(srcdir)/prim >$@ + +engine/prim.i: prim.b prims2x.fs + $(FORTHK) prims2x.fs -e "s\" prim.b\" ' output-c process-file bye" >$@- + $(CP) $@- $@ + $(RM) $@- + +engine/prim_lab.i: prim.b prims2x.fs + $(FORTHK) prims2x.fs -e "s\" prim.b\" ' output-label process-file bye" >$@- + $(CP) $@- $@ + $(RM) $@- + +kernel/aliases.fs: prim.b prims2x.fs kernel/aliases0.fs + $(CP) kernel/aliases0.fs $@- + $(FORTHK) prims2x.fs -e "s\" prim.b\" ' output-alias process-file bye" >>$@- + $(CP) $@- $@ + $(RM) $@- + +kernel/prim.fs: prim.b prims2x.fs kernel/prim0.fs + $(CP) kernel/prim0.fs kernel/prim.fs- + $(FORTHK) prims2x.fs -e "s\" prim.b\" ' output-forth process-file bye" >>$@- + $(CP) $@- $@ + $(RM) $@- -engine.s: engine.c primitives.i prim_labels.i machine.h threading.h $(INCLUDES) - $(GCC) $(CFLAGS) $(ENGINE_FLAGS) -S engine.c +gforth$(EXE): engines + -$(CP) gforth$(EXE) gforth~ + $(CP) engine/$@ $@ + @GFORTH_EXE@ -engine.o: engine.c primitives.i prim_labels.i machine.h threading.h $(INCLUDES) - $(GCC) $(CFLAGS) $(ENGINE_FLAGS) -c engine.c +gforth-ditc$(EXE): engines + $(CP) engine/$@ $@ + @GFORTHDITC_EXE@ -main.o: main.c machine.h threading.h $(INCLUDES) - $(GCC) $(CFLAGS) $(ENGINE_FLAGS) -c main.c +engines: FORCE + cd engine && $(MAKE) gforth$(EXE) gforth-ditc$(EXE) -strtoul.o: strtoul.c strtol.c +# ------------- additional C primitives -primitives.b: primitives - m4 -s $(srcdir)/primitives >$@ +%.c: %.pri prim2cl.fs + $(FORTHK) prim2cl.fs -e "file $< altogether bye" >$@ -primitives.i : primitives.b prims2x.fs - $(FORTHK) -p . prims2x.fs -e "s\" primitives.b\" ' output-c process-file bye" >$@ +%.so: %.c + $(GCC) -shared $(CFLAGS) $< -o $@ -prim_labels.i : primitives.b prims2x.fs - $(FORTHK) -p . prims2x.fs -e "s\" primitives.b\" ' output-label process-file bye" >$@ +# ------------- Make Documentation -aliases.fs: primitives.b prims2x.fs - $(FORTHK) -p . prims2x.fs -e "s\" primitives.b\" ' output-alias process-file bye" >$@ +#TAGS is a GNU standard target +TAGS: gforth.TAGS + $(CP) gforth.TAGS $@ -primitives.fs: primitives.b prims2x.fs - $(FORTHK) -p . prims2x.fs -e "s\" primitives.b\" ' output-forth process-file bye" >$@ +install.TAGS: gforth.TAGS + sed 's:^\$(srcdir)/:$(datadir)/gforth/$(VERSION)/:' gforth.TAGS >install.TAGS -primitives.TAGS: primitives.b prims2x.fs - $(FORTHK) -p . prims2x.fs -e "s\" primitives.b\" ' output-tag process-file bye" >$@ +gforth.TAGS: @kernel_fi@ gforth $(GFORTH_FI_SRC) prim.TAGS + $(FORTHK) etags.fs startup.fs -e bye + cat TAGS prim.TAGS kernel.TAGS >gforth.TAGS + rm TAGS + +prim.TAGS: prim.b prims2x.fs + $(FORTHK) prims2x.fs -e "s\" $(srcdir)/prim.b\" ' output-tag process-file bye" >$@- + $(CP) $@- $@ + $(RM) $@- + +doc/doc.fd: doc/makedoc.fs $(GFORTH_FI_SRC) code.fs objects.fs oof.fs mini-oof.fs + $(FORTHK) -e "s\" doc/doc.fd\"" doc/makedoc.fs startup.fs code.fs objects.fs oof.fs mini-oof.fs -e bye + +doc/crossdoc.fd: $(KERN_SRC) kernel/version.fs $(FORTH_GEN0) + $(FORTHK) -e 's" mach32l.fs"' kernel/main.fs -e bye -doc.fd: makedoc.fs float.fs search-order.fs glocals.fs environ.fs \ - toolsext.fs wordinfo.fs \ - vt100.fs colorize.fs see.fs bufio.fs debug.fs history.fs \ - doskey.fs vt100key.fs startup.fs assert.fs debugging.fs code.fs - $(FORTHK) -p . -e "s\" doc.fd\"" makedoc.fs startup.fs code.fs -e bye +doc/gforth.texi: doc/gforth.ds prim.b ds2texi.fs prims2x.fs \ + doc/doc.fd doc/crossdoc.fd + $(FORTHK) -m 100000 ds2texi.fs prims2x.fs -e "s\" $(srcdir)/prim.b\" ' register-doc process-file" doc/crossdoc.fd doc/doc.fd -e "s\" $(srcdir)/doc/gforth.ds\" r/o open-file throw ds2texi bye" >$@- + $(CP) $@- $@ + $(RM) $@- -crossdoc.fd: $(KERN_SRC) $(FORTH_GEN0) - $(FORTHK) -p . -e 's" mach32l.fs"' main.fs +checkdoc: doc/gforth.ds prim.b ds2texi.fs prims2x.fs doc/doc.fd doc/crossdoc.fd answords.fs doc/gforth.texi + $(FORTHK) -m 1M ds2texi.fs prims2x.fs -e "s\" $(srcdir)/prim.b\" ' register-doc process-file" doc/crossdoc.fd doc/doc.fd answords.fs -e bye + -grep unknown doc/gforth.texi -gforth.texi: gforth.ds primitives.b ds2texi.fs prims2x.fs doc.fd crossdoc.fd - $(FORTHK) -p . ds2texi.fs -e "s\" gforth.ds\" r/o open-file throw ds2texi bye" >$@ +dvi: doc/gforth.dvi -checkdoc: gforth.ds primitives.b ds2texi.fs prims2x.fs doc.fd crossdoc.fd answords.fs - $(FORTHK) -p . ds2texi.fs answords.fs -e bye +doc/gforth.dvi doc/gforth.fns: $(GFORTH_TEXI) + cd doc; $(TEXI2DVI) gforth.texi -gforth.dvi gforth.fns: gforth.texi - $(TEXI2DVI) gforth.texi +doc/gforth.ps: doc/gforth.dvi + $(DVI2PS) doc/gforth.dvi -o $@ -gforth.ps: gforth.dvi - $(DVI2PS) gforth.dvi -o $@ +info: doc/gforth.info -gforth.info*: gforth.texi - -$(MAKEINFO) gforth.texi +doc/gforth.info doc/gforth.info-*: $(GFORTH_TEXI) + -cd doc; $(MAKEINFO) gforth.texi -html: gforth.texi - -$(RM) html/* +html: $(GFORTH_TEXI) + -$(RMTREE) html -mkdir html - cd html; $(TEXI2HTML) -menu -split_node ../gforth.texi + cd html; $(TEXI2HTML) -menu -split_node ../doc/gforth.texi + +doc/gforth.txt: $(GFORTH_TEXI) + -cd doc; $(MAKEINFO) --no-headers --no-split gforth.texi >gforth.txt + +doc: doc/gforth.ps html doc/gforth.txt # For an explanation of the following Makefile rules, see node # `Automatic Remaking' in GNU Autoconf documentation. -${srcdir}/configure: configure.in - cd ${srcdir} && autoconf - +$(srcdir)/configure: configure.in aclocal.m4 + cd $(srcdir) && autoconf + +aclocal.m4: acinclude.m4 configure.in + aclocal + # autoheader might not change config.h.in, so touch a stamp file. -${srcdir}/config.h.in: stamp-h.in -${srcdir}/stamp-h.in: configure.in acconfig.h - cd ${srcdir} && autoheader - echo timestamp > ${srcdir}/stamp-h.in - -config.h: stamp-h -stamp-h: config.h.in config.status - CONFIG_FILES=$@ CONFIG_HEADERS=config.h ./config.status - echo > stamp-h -Makefile: Makefile.in config.status - CONFIG_FILES=$@ CONFIG_HEADERS=config.h ./config.status - -config.status: configure +engine/config.h.in: stamp-h.in +stamp-h.in: configure.in acconfig.h + cd $(srcdir) && autoheader + echo timestamp > $(srcdir)/stamp-h.in + +engine/config.h: stamp-h +stamp-h: engine/config.h.in config.status + CONFIG_FILES=$@ CONFIG_HEADERS=engine/config.h ./config.status + echo timestamp > stamp-h + +Makefile: Makefile.in engine/Makefile.in config.status + CONFIG_FILES="$@ engine/$@" CONFIG_HEADERS=engine/config.h ./config.status + +gforthmi: gforthmi.in config.status + CONFIG_FILES="$@" CONFIG_HEADERS=engine/config.h ./config.status + +config.status: configure ./config.status --recheck #create files for DOS, because DOS cannot do it itself -makefile.dos: mkdosmf.sed Makefile.in +makefile.dos: mkdosmf.sed Makefile.in engine/Makefile.in sed -f mkdosmf.sed makefile.dos + sed -f mkdosmf.sed engine/makefile.dos -history.dos: history.fs Makefile.in - sed -e "s,~/\.gforth-history,/gforth.his,g" history.dos - -startup.dos: startup.fs Makefile.in - sed -e "s/\\\\ include doskey/include doskey/g" \ - -e "s/include vt100key/\\\\ include vt100key/g" startup.dos - +makefile.os2: mkos2mf.sed Makefile.in engine/Makefile.in + sed -f mkos2mf.sed makefile.os2 + sed -f mkos2mf.sed engine/makefile.os2 + echo '%.o: %.c' >>makefile.os2 + echo ' $$(GCC) $$(CFLAGS) -c $$<' >>makefile.os2 + echo '%.o: %.c' >>engine/makefile.os2 + echo ' $$(GCC) $$(CFLAGS) -c $$<' >>engine/makefile.os2