Diff for /gforth/Makefile.in between versions 1.5 and 1.102

version 1.5, 1994/11/23 16:54:37 version 1.102, 1997/06/01 20:50:38
Line 1 Line 1
 #Copyright 1992 by the ANSI figForth Development Group  #Makefile for Gforth
   
 VERSION = 0.1alpha#gforth version  #Copyright (C) 1995-1997 Free Software Foundation, Inc.
   
   #This file is part of Gforth.
   
   #Gforth is free software; you can redistribute it and/or
   #modify it under the terms of the GNU General Public License
   #as published by the Free Software Foundation; either version 2
   #of the License, or (at your option) any later version.
   
   #This program is distributed in the hope that it will be useful,
   #but WITHOUT ANY WARRANTY; without even the implied warranty of
   #MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.#See the
   #GNU General Public License for more details.
   
   #You should have received a copy of the GNU General Public License
   #along with this program; if not, write to the Free Software
   #Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
   
   # To change the values of `make' variables: instead of editing Makefiles,
   # (1) if the variable is set in `config.status', edit `config.status'
   #     (which will cause the Makefiles to be regenerated when you run `make');
   # (2) otherwise, pass the desired values on the `make' command line.
   
   #gforth version
   VERSION_MAJOR=0
   VERSION_MINOR=3
   VERSION_RELEASE=1
   VERSION =$(VERSION_MAJOR).$(VERSION_MINOR).$(VERSION_RELEASE)
   DOSVERSION=$(VERSION_MAJOR)$(VERSION_MINOR)$(VERSION_RELEASE)
   SHELL   = /bin/sh
 RM      = rm  RM      = rm
   RMTREE  = rm -rf
 CP      = cp  CP      = cp
 GCC     = gcc  TAR     = tar cf -
 FORTH   = gforth  INSTALL = @INSTALL@
 CC      = gcc  INSTALL_PROGRAM = @INSTALL_PROGRAM@
 MAKE    = gmake  INSTALL_DATA = @INSTALL_DATA@
 XCFLAGS =  LN_S    = @LN_S@
 XDEFINES        =  GCC     = @CC@
 SWITCHES        = $(XCFLAGS) $(XDEFINES) -DDEFAULTBIN='"'`pwd`'"' #-DNDEBUG #turn off assertions  CC      = $(GCC)
 CFLAGS  = -O4 -Wall $(SWITCHES)  PATHSEP = @PATHSEP@
   FORTHPATH = $(libdir)/gforth/site-forth$(PATHSEP)$(datadir)/gforth/site-forth$(PATHSEP)$(libdir)/gforth/$(VERSION)$(PATHSEP)$(datadir)/gforth/$(VERSION)$(PATHSEP).
   FORTHSIZES = @FORTHSIZES@
   FORTH   = ./gforth -p $(FORTHPATH)$(PATHSEP)$(srcdir)
   FORTHKFLAGS= -p .$(PATHSEP)$(srcdir) -i ./kernel.fi
   FORTHK  = ./gforth $(FORTHKFLAGS)
   FORTHP  = ./gforth -i ./kernel.fi
   STRIP   = strip
   TEXI2DVI = texi2dvi
   DVI2PS  = dvips -D300
   #you can get texi2html from http://wwwcn.cern.ch/dci/texi2html/
   TEXI2HTML = texi2html
   MAKEINFO = makeinfo
   XCFLAGS = @CFLAGS@
   XDEFINES = @DEFS@
   SWITCHES = $(XCFLAGS) $(XDEFINES) #-DNDEBUG #turn off assertions
   ENGINE_FLAGS = @ENGINE_FLAGS@ -fno-defer-pop -fcaller-saves
   DEBUGFLAG = @DEBUGFLAG@
   CFLAGS  = $(DEBUGFLAG) -I$(srcdir)/engine -I$(srcdir) -O4 -Wall $(SWITCHES) -DDEFAULTPATH=\"$(FORTHPATH)\"
   
 #-Xlinker -n puts text and data into the same 256M region  
 #John Wavrik should use -Xlinker -N to get a writable text (executable)  #John Wavrik should use -Xlinker -N to get a writable text (executable)
 LDFLAGS = -Xlinker -N  XLDFLAGS = @LDFLAGS@
 LDLIBS  = -lm  GCCLDFLAGS = @GCCLDFLAGS@
   LDFLAGS =  $(DEBUGFLAG) $(XLDFLAGS) $(GCCLDFLAGS)
 EMACS   = emacs  LDLIBS  = @LIBS@
   
 INCLUDES = forth.h io.h  VPATH = @srcdir@
   prefix = @prefix@
 FORTH_SRC = add.fs assert.fs blocks.fs bufio.fs cross.fs debug.fs \  exec_prefix = @exec_prefix@
         debugging.fs doskey.fs ds2texi.fs environ.fs errore.fs etags.fs extend.fs filedump.fs \  srcdir = @srcdir@
         float.fs glocals.fs glosgen.fs gray.fs hash.fs history.fs kernal.fs \  bindir = $(exec_prefix)/bin
         locals-test.fs look.fs mach32b.fs mach32l.fs main.fs other.fs \  #read-only architecture-independent files
         prims2x.fs search-order.fs see.fs sieve.fs startup.fs struct.fs \  datadir = $(prefix)/share
         test2.fs tools.fs toolsext.fs vars.fs vt100.fs vt100key.fs wordinfo.fs  #read-only architecture-dependent non-ascii files
   libdir = $(prefix)/lib
 SOURCES = Makefile.in configure  config.sub  config.guess \  infodir = $(prefix)/info
         INSTALL README ToDo BUGS model gforth.ds \  mandir = $(prefix)/man
         primitives primitives2c.el engine.c main.c io.c \  man1dir= $(mandir)/man1
         apollo68k.h decstation.h 386.h hppa.h cache.c sparc.h \  man1ext= .1
         getopt.c getopt1.c getopt.h \  #older emacses have their site-lisp in $(libdir)/emacs/
         $(INCLUDES) $(FORTH_SRC)  emacssitelispdir=$(datadir)/emacs/site-lisp
   
   INCLUDES = engine/CVS engine/forth.h engine/threaded.h engine/io.h
   
   KERN_SRC = \
           kernel/CVS \
           kernel/aliases0.fs \
           kernel/aliases.fs \
           kernel/args.fs \
           kernel/cond.fs \
           kernel/cond-old.fs \
           cross.fs \
           kernel/errore.fs \
           kernel/files.fs \
           kernel/require.fs \
           kernel/paths.fs \
           kernel/kernel.fs \
           kernel/main.fs \
           kernel/prim0.fs \
           search.fs \
           kernel/special.fs \
           kernel/tools.fs \
           kernel/toolsext.fs \
           kernel/vars.fs \
           kernel/accept.fs \
           kernel/basics.fs \
           kernel/interp.fs \
           kernel/io.fs \
           kernel/license.fs \
           kernel/nio.fs \
           kernel/saccept.fs
   
   GFORTH_FI_SRC = \
           assert.fs \
           blocked.fb \
           blocks.fs \
           bufio.fs \
           debug.fs \
           debugs.fs \
           savesys.fs \
           environ.fs \
           errors.fs \
           extend.fs \
           float.fs \
           glocals.fs \
           hash.fs \
           history.fs \
           intcomp.fs \
           locals.fs \
           look.fs \
           search.fs \
           see.fs \
           see-ext.fs \
           source.fs \
           startup.fs \
           struct.fs \
           stuff.fs \
           tasker.fs \
           termsize.fs \
           vt100.fs \
           vt100key.fs \
           wordinfo.fs \
           lib.fs \
           sieve.fs \
           add.fs
   
   FORTH_SRC = $(KERN_SRC) $(GFORTH_FI_SRC) \
           ans-report.fs ansi.fs answords.fs \
           code.fs colorize.fs comp-i.fs \
           doskey.fs ds2texi.fs \
           etags.fs filedump.fs \
           glosgen.fs gray.fs \
           doc/makedoc.fs \
           mach16b.fs mach16l.fs mach32b.fs mach32l.fs mach64b.fs mach64l.fs \
           more.fs other.fs prims2x.fs random.fs \
           siteinit.fs \
           tt.fs sokoban.fs \
           wordsets.fs \
           test/tester.fs test/coretest.fs test/postpone.fs test/dbltest.fs \
           test/other.fs test/checkans.fs test/CVS \
           bubble.fs siev.fs matrix.fs fib.fs \
           oof.fs oofsampl.fs objects.fs
   
   COMPAT  = compat/CVS compat/README compat/control.fs compat/anslocal.fs \
           compat/struct.fs compat/loops.fs
   
   ALLSUBDIRS = engine
   
   ARCHS = arch/m68k/machine.h \
           arch/mips/machine.h \
           arch/386/machine.h \
           arch/hppa/machine.h \
           arch/sparc/machine.h \
           arch/power/machine.h \
           arch/alpha/machine.h \
           arch/4stack/README \
           arch/4stack/asm.fs \
           arch/4stack/mach.fs \
           arch/4stack/prim.fs \
           arch/4stack/mach.sh \
           arch/4stack/relocate.fs \
           arch/misc/README \
           arch/misc/asm.fs \
           arch/misc/mach.fs \
           arch/misc/prim.fs \
           arch/misc/sim.fs \
           arch/misc/sokoban.fs \
           arch/misc/tt.fs
   
   SOURCES = CVS compat Makefile.in engine/Makefile.in gforthmi \
           configure.in configure config.sub config.guess \
           acconfig.h engine/config.h.in stamp-h.in \
           install-sh INSTALL INSTALL.BINDIST NEWS README ToDo BUGS model \
           COPYING Benchres aclocal.m4 \
           doc/gforth.ds doc/texinfo.tex doc/gforth.1 gforth.el \
           prim engine/engine.c engine/main.c engine/io.c engine/memcmpc.c \
           $(ARCHS) \
           engine/cache.c engine/32bit.h \
           engine/getopt.c engine/getopt1.c engine/getopt.h engine/select.c \
           engine/ecvt.c engine/memcmp.c engine/strtol.c engine/strtoul.c \
           engine/ansidecl.h engine/memmove.c \
           engine/pow10.c engine/atanh.c engine/cleanalign.c \
           engine/strerror.c engine/strsignal.c engine/strsig.c engine/dblsub.c \
           INSTALL.DOS makefile.dos engine/makefile.dos mkdosmf.sed config.bat \
           dosconf.h gforthmi.bat startup.dos history.dos mkinstalldirs \
           configure.cmd mkos2mf.sed os2conf.h makefile.os2 engine/makefile.os2 \
           gforthmi.cmd glosgen.glo doc/glossaries.doc \
           $(INCLUDES) $(FORTH_SRC) $(COMPAT) \
           testclean testdist testdist1 timings.sc
   
 RCS_FILES =  ToDo model high-level  RCS_FILES =  ToDo model high-level
   
 GEN = gforth  GEN = gforth gforth-ditc kernel/version.fs version-stamp
   
 OBJECTS = engine.o io.o main.o  OBJECTS0 = engine/replace.a
   OBJECTS = engine/engine.o engine/main.o
   OBJECTS_DITC =  engine/engine-ditc.o engine/main-ditc.o
   
 # things that need a working forth system to be generated  # things that need a working forth system to be generated
   FORTH_GEN0 = prim.b engine/prim.i engine/prim_lab.i kernel/aliases.fs kernel/prim.fs
   FORTH_GEN =  $(FORTH_GEN0) @KERNEL@ gforth.fi
 # this is used for antidependences,  # this is used for antidependences,
   FORTH_GEN1 = $(FORTH_GEN0) @kernel_fi@ 
   
   #distributed documentation
   DOCDIST = doc/gforth.info doc/gforth.info-* doc/gforth.ps
   
   #stuff in a binonly distribution 
   BINONLYDIST = config.status Makefile gforth gforth-ditc \
           $(OBJECTS0) $(OBJECTS) $(OBJECTS_DITC)\
           machine/machine.h engine/config.h kernel.fi \
           stamp-h engine/version.h kernel/version.fs version-stamp \
           INSTALL.BINDIST
   
 FORTH_GEN =  primitives.b primitives.i prim_labels.i aliases.fs kernl32l.fi kernl32b.fi  KERNLS = kernl16b.fi- kernl16l.fi- \
            kernl32b.fi- kernl32l.fi- \
            kernl64b.fi- kernl64l.fi-
   
 GEN_PRECIOUS = $(FORTH_GEN) gforth.texi gforth.dvi gforth.ps Makefile  GEN_PRECIOUS = $(FORTH_GEN) $(KERNLS) doc/gforth.texi doc/gforth.dvi doc/gforth.ps Makefile configure
   
 all:  #standards.info recommends this:
         if [ ! -x gforth ]; then $(MAKE) first; fi  .SUFFIXES:
         $(MAKE) more  .SUFFIXES: .c .o
   
 first:  gforth  all:    kernel/version.fs more
   
 more:   $(FORTH_GEN) gforth  #this rule avoids remaking everything after minor changes in Makefile.in
   version:        Makefile.in
                   if test -r $@ && test x'$(VERSION)' = x`cat $@` ; then true ; else echo $(VERSION) > $@ ; fi
   
   engine/version.h:       version
                   echo "static char gforth_version[]=\"$(VERSION)\" ;" >$@
   
   kernel/version.fs:      version
                   $(MAKE) gforth
                   echo ": version-string s\" $(VERSION)\" ;" >$@
   
   more:   $(OBJECTS) $(FORTH_GEN) gforth
   
 #from the gcc Makefile:   #from the gcc Makefile: 
 #"Deletion of files made during compilation.  #"Deletion of files made during compilation.
Line 67  more: $(FORTH_GEN) gforth Line 270  more: $(FORTH_GEN) gforth
 # `distclean' also deletes the files made by config.  # `distclean' also deletes the files made by config.
 # `realclean' also deletes everything that could be regenerated automatically."  # `realclean' also deletes everything that could be regenerated automatically."
   
 clean:            mostlyclean:
                 -$(RM) $(GEN) *.o *.s                  -$(RM) -rf *.s gforth.fi *.fi~ *.fi- kernel/version.fs *TAGS \
                   doc/crossdoc.fd doc/doc.fd doc/gforth.texi doc/gforth.fns \
                   doc/gforth.aux doc/gforth.cp doc/gforth.cps \
                   doc/gforth.dvi doc/gforth.fn doc/gforth.ky doc/gforth.log \
                   doc/gforth.pg \
                   doc/gforth.toc doc/gforth.tp doc/gforth.vr html \
                   gforth-$(VERSION).tar.gz \
                   engine/version.h
   
 distclean:      clean  clean:          mostlyclean
                 -$(RM) machine.h machine.fs                  -$(RM) -rf $(GEN) *.o engine/*.o engine/*.a
   
 realclean:      distclean  distclean:      clean
                 -$(RM) $(GEN_PRECIOUS)                  -$(RM) machine/machine.h kernel.fi config.cache config.log \
                   config.status engine/config.h Makefile stamp-h
   
 package:        $(SOURCES) $(GEN_PRECIOUS) CVS  #realclean is useless, but dangerous, so it's commented out
                 -rm -rf gforth-$(VERSION)  #realclean:     distclean
   #               -$(RM) $(GEN_PRECIOUS)
   
   #mostlyclean, but also remove some of the stuff that is distributed
   virtualclean:   mostlyclean
                   -$(RM) -rf gforth.fns gforth.texi gforth.ps gforth.info* \
                   gforth-$(VERSION).tar.gz config.cache *~ */*~
   
   #use dist targets only when srcdir=.
   dist:           $(SOURCES) $(FORTH_GEN0) @KERNEL@ $(DOCDIST)
                   -$(RMTREE) gforth-$(VERSION)
                   mkdir gforth-$(VERSION)
                   $(TAR) $(SOURCES) $(FORTH_GEN0) @KERNEL@ $(DOCDIST) | \
                           (cd gforth-$(VERSION); tar xf -)
                   $(TAR) gforth-$(VERSION)|gzip -9 >gforth-$(VERSION).tar.gz
                   -$(RMTREE) gforth-$(VERSION)
   
   #use dist targets only when srcdir=.
   dosdist:        $(SOURCES) $(FORTH_GEN0) @KERNEL@ $(DOCDIST)
                   -$(RMTREE) gforth.$(DOSVERSION)
                   mkdir gforth.$(DOSVERSION)
                   $(TAR) $(SOURCES) $(FORTH_GEN0) @KERNEL@ $(DOCDIST) | \
                           (cd gforth.$(DOSVERSION); tar xf -)
                   zip -r9 gf$(DOSVERSION)dos.zip gforth.$(DOSVERSION)/*
                   -$(RMTREE) gforth.$(DOSVERSION)
   
   #A source distribution contains only the things needed to install gforth,
   #without the documents.
   srcdist:        $(SOURCES) $(FORTH_GEN0) @KERNEL@
                   -$(RMTREE) gforth-$(VERSION)
                 mkdir gforth-$(VERSION)                  mkdir gforth-$(VERSION)
                 cp -rp $^ gforth-$(VERSION)                  $(TAR) $(SOURCES) $(FORTH_GEN0) @KERNEL@ | \
                 touch gforth-$(VERSION)/Makefile.in                          (cd gforth-$(VERSION); tar xf -)
                 tar cvf gforth-$(VERSION).tar gforth-$(VERSION)                  $(TAR) gforth-$(VERSION)|gzip -9 >gforth-src-$(VERSION).tar.gz
                 gzip -9 -f gforth-$(VERSION).tar                  -$(RMTREE) gforth-$(VERSION)
                 @echo add a zip command here              
   
 Makefile:       Makefile.in  srconlydist:    $(SOURCES)
                 configure                  -$(RMTREE) gforth-$(VERSION)
                   mkdir gforth-$(VERSION)
                   $(TAR) $(SOURCES) | \
                           (cd gforth-$(VERSION); tar xf -)
                   $(TAR) gforth-$(VERSION)|gzip -9 >gforth-srconly-$(VERSION).tar.gz
                   -$(RMTREE) gforth-$(VERSION)
   
   #A document distribution contains only the documents, which can be created
   #with MAKE.
   docdist:        $(DOCDIST)
                   -$(RMTREE) gforth-$(VERSION)
                   mkdir gforth-$(VERSION)
                   $(TAR) $(DOCDIST) | (cd gforth-$(VERSION); tar xf -)
                   $(TAR) gforth-$(VERSION)|gzip -9 >gforth-doc-$(VERSION).tar.gz
                   -$(RMTREE) gforth-$(VERSION)
   
   #a binary distribution contains the complete source distribution,
   # the objects, the executable and the links. the objects are there for making
   # make happy.
   bindist:        $(SOURCES) $(FORTH_GEN0) @KERNEL@ $(DOCDIST) $(BINONLYDIST)
                   -$(RMTREE) gforth-$(VERSION)
                   mkdir gforth-$(VERSION)
                   $(TAR) $(SOURCES) $(FORTH_GEN0) @KERNEL@ $(DOCDIST) $(BINONLYDIST) | (cd gforth-$(VERSION); tar xf -)
                   strip gforth-$(VERSION)/gforth
                   $(TAR) gforth-$(VERSION)|gzip -9 >gforth-$(VERSION)-@host@.tar.gz
   
   #makes a package with only the stuff not present in the source
   #package. For installation the source package is still needed!
   #This is useful if you want to distribute many binary versions in
   #little space (e.g., on floppy disk): Put the source package and
   #all the binonly packages you are interested in on the disk. The user
   #then just has to unpack the source and his favourite binonly into the
   #same directory and has a full binary distribution.
   binonlydist:    $(SOURCES) $(FORTH_GEN0) @KERNEL@ $(DOCDIST) $(BINONLYDIST)
                   -$(RMTREE) gforth-$(VERSION)
                   mkdir gforth-$(VERSION)
                   $(TAR) $(BINONLYDIST) | (cd gforth-$(VERSION); tar xf -)
                   strip gforth-$(VERSION)/gforth
                   $(TAR) gforth-$(VERSION)|gzip -9 >gforth-$(VERSION)-binonly-@host@.tar.gz
   
   
   #strip gforth, because the debugging stuff is hardly useful once
   # gforth manages to execute more than a few primitives
   
   #install does not depend on gforth.info, because that would require
   #supplying a lot of files that can be easily generated (only info is
   #hard to generate)
   install:        gforth $(FORTH_SRC) kernel.fi gforth.fi doc/gforth.1 prim gforth.TAGS installdirs
                   touch $(datadir)/gforth/site-forth/siteinit.fs
                   -$(RM) $(bindir)/gforth $(bindir)/gforth-$(VERSION)
                   $(INSTALL_PROGRAM) -s gforth $(bindir)
                   ln $(bindir)/gforth $(bindir)/gforth-$(VERSION)
                   -$(INSTALL_DATA) $(srcdir)/doc/gforth.1 $(man1dir)
                   -for i in $(srcdir)/gforth.info*; do $(INSTALL_DATA) $$i $(infodir); done
                   for i in $(FORTH_SRC) prim; do \
                           $(INSTALL_DATA) $(srcdir)/$$i $(datadir)/gforth/$(VERSION); \
                   done
                   $(INSTALL_DATA) kernel.fi $(libdir)/gforth/$(VERSION)
                   $(RM) gforth.fi; $(MAKE) gforth.fi #gforth.fi contains some path names
                   $(INSTALL_DATA) gforth.fi $(libdir)/gforth/$(VERSION)
                   sed 's:^$(srcdir)/:$(datadir)/gforth/$(VERSION)/:' gforth.TAGS >TAGS; $(INSTALL_DATA) TAGS $(datadir)/gforth/$(VERSION)
                   if test -d $(emacssitelispdir); then \
                           $(INSTALL_DATA) $(srcdir)/gforth.el $(emacssitelispdir); \
                   else \
                           echo ">>>>>Please install $(srcdir)/gforth.el in your .../emacs/site-lisp directory"; \
                   fi
                   echo ">>>>> Please make an entry for Gforth in your info dir file; e.g.:"; \
                   echo "* Gforth: (gforth).       A fast interpreter for the Forth language."
   
   install-strip:  install
   
   installdirs:    mkinstalldirs
                   $(srcdir)/mkinstalldirs $(bindir) $(man1dir) $(infodir) $(libdir)/gforth/$(VERSION) $(datadir)/gforth/$(VERSION) $(libdir)/gforth/site-forth $(datadir)/gforth/site-forth
   
   #deinstall all files specific to this version of gforth
   #to uninstall version foo, type `make uninstall VERSION=foo'
   uninstall:      
                   -$(RM) -rf $(libdir)/gforth/$(VERSION) $(datadir)/gforth/$(VERSION) $(bindir)/gforth-$(VERSION)
                   @echo -e "Type\n$(RM) -rf $(bindir)/gforth $(man1dir)/gforth.1 $(infodir)/gforth.info* $(datadir)/gforth $(libdir)/gforth\nto remove Gforth completely"
   
   check test:     gforth gforth.fi
                   $(FORTH) test/tester.fs test/coretest.fs test/postpone.fs test/dbltest.fs -e bye
                   $(FORTH) test/other.fs -e bye
                   $(FORTH) code.fs test/checkans.fs -e bye
                   @echo 'Expect no differences'
                   $(FORTH) -m 100000 prims2x.fs -e "s\" $(srcdir)/prim.b\"' output-c process-file bye"| diff -c - $(srcdir)/engine/prim.i
   
   bench:          gforth gforth.fi
                   @echo 'Each benchmark takes about 30s on a 486-66 (gcc-2.6.3 -DFORCE_REG)'
                   time $(FORTH) siev.fs -e "main bye"
                   time $(FORTH) bubble.fs -e "main bye"
                   time $(FORTH) -m 160000 matrix.fs -e "main bye"
                   time $(FORTH) fib.fs -e "main bye"
   
 gforth: $(OBJECTS)  gforth:         $(OBJECTS) $(OBJECTS0)
                 -$(CP) gforth gforth~                  -$(CP) gforth gforth~
                 $(GCC) $(LDFLAGS) $(OBJECTS) $(LDLIBS) -o $@                  $(GCC) $(LDFLAGS) $(OBJECTS) $(OBJECTS0) $(LDLIBS) -o $@
                   @GFORTH_EXE@
 kernl32l.fi:    main.fs search-order.fs cross.fs aliases.fs vars.fs add.fs \  
                 errore.fs kernal.fs extend.fs tools.fs toolsext.fs \  
                 mach32l.fs $(FORTH_GEN)  
                 -$(CP) kernl32l.fi kernl32l.fi~  
                 $(FORTH) -e 's" mach32l.fs"' main.fs  
   
 kernl32b.fi:    main.fs search-order.fs cross.fs aliases.fs vars.fs add.fs \  gforth-ditc:    $(OBJECTS_DITC) $(OBJECTS0)
                 errore.fs kernal.fs extend.fs tools.fs toolsext.fs \                  $(GCC) $(LDFLAGS) $(OBJECTS_DITC) $(OBJECTS0) $(LDLIBS) -o $@
                 mach32b.fs $(FORTH_GEN)                  @GFORTHDITC_EXE@
                 -$(CP) kernl32b.fi kernl32b.fi~  
                 $(FORTH) -e 's" mach32b.fs"' main.fs  
   
 engine.s:       engine.c primitives.i prim_labels.i machine.h $(INCLUDES)  
                 $(GCC) $(CFLAGS) -S engine.c  
   
 engine.o:       engine.c primitives.i prim_labels.i machine.h $(INCLUDES)  
   
 primitives.b:   primitives  kernl16l.fi-:   $(KERN_SRC) kernel/version.fs mach16l.fs $(FORTH_GEN0)
                 m4 primitives >$@                   $(FORTHK) -e 's" mach16l.fs"' kernel/main.fs -e "save-cross kernl16l.fi- $(bindir)/gforth-$(VERSION) bye"
   
 primitives.i :  primitives.b prims2x.fs  kernl16b.fi-:   $(KERN_SRC) kernel/version.fs mach16b.fs $(FORTH_GEN0)
                 $(FORTH) prims2x.fs -e "s\" primitives.b\" ' output-c process-file bye" >$@                  $(FORTHK) -e 's" mach16b.fs"' kernel/main.fs -e "save-cross kernl16b.fi- $(bindir)/gforth-$(VERSION) bye"
   
 prim_labels.i : primitives.b prims2x.fs  kernl32l.fi-:   $(KERN_SRC) kernel/version.fs mach32l.fs $(FORTH_GEN0)
                 $(FORTH) prims2x.fs -e "s\" primitives.b\" ' output-label process-file bye" >$@                  $(FORTHK) -e 's" mach32l.fs"' kernel/main.fs -e "save-cross kernl32l.fi- $(bindir)/gforth-$(VERSION) bye"
   
 aliases.fs:     primitives.b prims2x.fs  kernl32b.fi-:   $(KERN_SRC) kernel/version.fs mach32b.fs $(FORTH_GEN0)
                 $(FORTH) prims2x.fs -e "s\" primitives.b\" ' output-alias process-file bye" >$@                  $(FORTHK) -e 's" mach32b.fs"' kernel/main.fs -e "save-cross kernl32b.fi- $(bindir)/gforth-$(VERSION) bye"
   
 primitives.fs:  primitives.b prims2x.fs  kernl64l.fi-:   $(KERN_SRC) kernel/version.fs mach64l.fs $(FORTH_GEN0)
                 $(FORTH) prims2x.fs -e "s\" primitives.b\" ' output-forth process-file bye" >$@                  $(FORTHK) -e 's" mach64l.fs"' kernel/main.fs -e "save-cross kernl64l.fi- $(bindir)/gforth-$(VERSION) bye"
   
 gforth.texi:    gforth.ds primitives.b ds2texi.fs prims2x.fs  kernl64b.fi-:   $(KERN_SRC) kernel/version.fs mach64b.fs $(FORTH_GEN0)
                 $(FORTH) ds2texi.fs >$@                  $(FORTHK) -e 's" mach64b.fs"' kernel/main.fs -e "save-cross kernl64b.fi- $(bindir)/gforth-$(VERSION) bye"
   
 gforth.dvi:     gforth.texi  kernl-%.fi:     arch/%/mach.fs $(KERN_SRC) kernel/version.fs $(FORTH_GEN0) \
                 tex gforth.texi                  arch/%/prim.fs arch/%/asm.fs
                   $(FORTHK) -e 's" $<"' kernel/main.fs -e "save-cross $@- $(bindir)/gforth-$(VERSION) bye"
                   if [ -f `echo $< | sed s/fs/sh/` ]; \
                   then sh `echo $< | sed s/fs/sh/` $@; \
                   else $(CP) $@- $@; \
                   fi
   
 gforth.ps:      gforth.dvi  kernl16b.fi:    $(KERNLS)
                 dvips gforth.dvi -o $@                  -$(CP) kernl16b.fi kernl16b.fi~
                   -$(CP) kernl16b.fi- kernl16b.fi
   
 #primitives.4th:        primitives.b primitives2c.el  kernl16l.fi:    $(KERNLS)
 #               $(EMACS) -batch -load primitives2c.el -funcall make-forth                  -$(CP) kernl16l.fi kernl16l.fi~
                   -$(CP) kernl16l.fi- kernl16l.fi
   
 #GNU make default rules  kernl32b.fi:    $(KERNLS)
 #% ::           RCS/%,v                  -$(CP) kernl32b.fi kernl32b.fi~
 #               co $@                  -$(CP) kernl32b.fi- kernl32b.fi
   
 %.s :           %.c $(INCLUDES)  
                 $(CC) $(CFLAGS) -S $< -o $@  
   
 %.o :           %.s  kernl32l.fi:    $(KERNLS)
                 $(CC) $(CFLAGS) -c $< -o $@                  -$(CP) kernl32l.fi kernl32l.fi~
                   -$(CP) kernl32l.fi- kernl32l.fi
   
   kernl64b.fi:    $(KERNLS)
                   -$(CP) kernl64b.fi kernl64b.fi~
                   -$(CP) kernl64b.fi- kernl64b.fi
   
   kernl64l.fi:    $(KERNLS)
                   -$(CP) kernl64l.fi kernl64l.fi~
                   -$(CP) kernl64l.fi- kernl64l.fi
   
   #kernl%.fi:     kernl%.fi- $(KERNLS)
   #               -$(CP) $@ $@~
   #               -$(CP) $< $@
   
   gforth.fi:      @kernel_fi@ gforthmi gforth gforth-ditc $(GFORTH_FI_SRC)
                   GFORTHD="./gforth-ditc -p .$(PATHSEP)$(srcdir)" GFORTH="./gforth-ditc -p .$(PATHSEP)$(srcdir) -i kernel.fi startup.fs" $(srcdir)/gforthmi gforth.fi $(FORTHSIZES) $(FORTHKFLAGS) startup.fs
   
   #TAGS is a GNU standard target
   TAGS:           gforth.TAGS
                   $(CP) gforth.TAGS $@
   
   gforth.TAGS:    @kernel_fi@ gforth $(GFORTH_FI_SRC) prim.TAGS
                   $(FORTHK) etags.fs startup.fs -e bye
                   cat TAGS prim.TAGS kernel.TAGS >gforth.TAGS
                   rm TAGS
   
   engine/replace.a:
                   cd engine; $(MAKE) replace.a
   
   engine.s:       engine/engine.c engine/prim.i engine/prim_lab.i machine/machine.h engine/threaded.h $(INCLUDES) engine/config.h
                   $(GCC) $(CFLAGS) $(ENGINE_FLAGS) -S $(srcdir)/engine/engine.c
   
   engine/engine.o:        engine/engine.c engine/prim.i engine/prim_lab.i machine/machine.h engine/threaded.h $(INCLUDES) engine/config.h
                   $(GCC) $(CFLAGS) $(ENGINE_FLAGS) -c $(srcdir)/engine/engine.c -o $@
   
   engine/engine-ditc.o:   engine/engine.c engine/prim.i engine/prim_lab.i machine/machine.h engine/threaded.h $(INCLUDES) engine/config.h
                   $(GCC) $(CFLAGS) $(ENGINE_FLAGS) -DDOUBLY_INDIRECT -o $@ -c $(srcdir)/engine/engine.c
   
   engine/main.o:          engine/main.c machine/machine.h engine/threaded.h $(INCLUDES) engine/config.h engine/version.h
                   $(GCC) $(CFLAGS) $(ENGINE_FLAGS) -o $@ -c $(srcdir)/engine/main.c
   
   engine/main-ditc.o:     engine/main.c machine/machine.h engine/threaded.h $(INCLUDES) engine/config.h engine/version.h
                   $(GCC) $(CFLAGS) $(ENGINE_FLAGS) -DDOUBLY_INDIRECT -o $@ -c $(srcdir)/engine/main.c
   
   engine/strtoul.o:       strtoul.c strtol.c
   
   prim.b:         prim
                   m4 -s $(srcdir)/prim >$@ 
   
   engine/prim.i:          prim.b prims2x.fs
                   $(FORTHK) prims2x.fs -e "s\" prim.b\" ' output-c process-file bye" >$@-
                   $(CP) $@- $@
                   $(RM) $@-
   
   engine/prim_lab.i:      prim.b prims2x.fs
                   $(FORTHK) prims2x.fs -e "s\" prim.b\" ' output-label process-file bye" >$@-
                   $(CP) $@- $@
                   $(RM) $@-
   
   kernel/aliases.fs:      prim.b prims2x.fs kernel/aliases0.fs
                   $(CP) kernel/aliases0.fs $@-
                   $(FORTHK) prims2x.fs -e "s\" prim.b\" ' output-alias process-file bye" >>$@-
                   $(CP) $@- $@
                   $(RM) $@-
   
   kernel/prim.fs: prim.b prims2x.fs kernel/prim0.fs
                   $(CP) kernel/prim0.fs kernel/prim.fs-
                   $(FORTHK) prims2x.fs -e "s\" prim.b\" ' output-forth process-file bye" >>$@-
                   $(CP) $@- $@
                   $(RM) $@-
   
   prim.TAGS:      prim.b prims2x.fs
                   $(FORTHK) prims2x.fs -e "s\" $(srcdir)/prim.b\" ' output-tag process-file bye" >$@-
                   $(CP) $@- $@
                   $(RM) $@-
   
   doc/doc.fd:     doc/makedoc.fs $(GFORTH_FI_SRC)
                   $(FORTHK) -e "s\" doc/doc.fd\"" doc/makedoc.fs startup.fs code.fs -e bye
   
   doc/crossdoc.fd:        $(KERN_SRC) kernel/version.fs $(FORTH_GEN0)
                   $(FORTHK) -e 's" mach32l.fs"' kernel/main.fs -e bye
   
   doc/gforth.texi:        doc/gforth.ds prim.b ds2texi.fs prims2x.fs \
                   doc/doc.fd doc/crossdoc.fd
                   $(FORTHK) -m 100000 ds2texi.fs prims2x.fs -e "s\" $(srcdir)/prim.b\" ' register-doc process-file" doc/crossdoc.fd doc/doc.fd -e "s\" $(srcdir)/doc/gforth.ds\" r/o open-file throw ds2texi bye" >$@-
                   $(CP) $@- $@
                   $(RM) $@-
   
   checkdoc:       doc/gforth.ds prim.b ds2texi.fs prims2x.fs doc/doc.fd doc/crossdoc.fd answords.fs doc/gforth.texi
                   $(FORTHK) ds2texi.fs prims2x.fs -e "s\" $(srcdir)/prim.b\" ' register-doc process-file" doc/crossdoc.fd doc/doc.fd answords.fs -e bye
                   -grep unknown doc/gforth.texi
   
   dvi:            doc/gforth.dvi
   
   doc/gforth.dvi doc/gforth.fns:  doc/gforth.texi
                   cd doc; $(TEXI2DVI) gforth.texi
   
   doc/gforth.ps:  doc/gforth.dvi
                   $(DVI2PS) doc/gforth.dvi -o $@
   
   info:           doc/gforth.info
   
   doc/gforth.info doc/gforth.info-*:      doc/gforth.texi
                   -cd doc; $(MAKEINFO) gforth.texi
   
   html:           doc/gforth.texi
                   -$(RM) html/*
                   -mkdir html
                   cd html; $(TEXI2HTML) -menu -split_node ../doc/gforth.texi
   
   doc:            doc/gforth.ps html
   
   # For an explanation of the following Makefile rules, see node
   # `Automatic Remaking' in GNU Autoconf documentation.
   $(srcdir)/configure:    configure.in 
                   cd $(srcdir) && autoconf
   
   # autoheader might not change config.h.in, so touch a stamp file.
   config.h.in:    stamp-h.in
   stamp-h.in:     configure.in  acconfig.h
                   cd $(srcdir) && autoheader
                   echo timestamp > $(srcdir)/stamp-h.in
   
   engine/config.h:        stamp-h
   stamp-h:        config.h.in config.status
                   CONFIG_FILES=$@ CONFIG_HEADERS=engine/config.h ./config.status
                   echo > stamp-h
   Makefile:       Makefile.in config.status
                   CONFIG_FILES="$@ engine/$@" CONFIG_HEADERS=engine/config.h ./config.status
        
   config.status:  configure
                   ./config.status --recheck
   
   
   #create files for DOS, because DOS cannot do it itself
   makefile.dos: mkdosmf.sed Makefile.in
           sed -f mkdosmf.sed <Makefile.in >makefile.dos
           sed -f mkdosmf.sed <engine/Makefile.in >engine/makefile.dos
   
   makefile.os2: mkos2mf.sed Makefile.in
           sed -f mkos2mf.sed <Makefile.in >makefile.os2
           sed -f mkos2mf.sed <engine/Makefile.in >engine/makefile.os2
           echo '%.o:      %.c' >>makefile.os2
           echo '          $$(GCC) $$(CFLAGS) -c $$<' >>makefile.os2
           echo '%.o:      %.c' >>engine/makefile.os2
           echo '          $$(GCC) $$(CFLAGS) -c $$<' >>engine/makefile.os2
   
   # history is a little bit different now! JAW
   #history.dos: history.fs Makefile.in
   #       sed -e "s,~/\.gforth-history,/gforth.his,g" <history.fs >history.dos
   
   startup.dos: startup.fs Makefile.in
           sed -e "s/\\\\ include doskey/include doskey/g" \
               -e "s/include vt100key/\\\\ include vt100key/g" <startup.fs >startup.dos

Removed from v.1.5  
changed lines
  Added in v.1.102


FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>