--- gforth/Makefile.in 1994/11/15 15:55:31 1.2 +++ gforth/Makefile.in 1997/06/01 20:50:38 1.102 @@ -1,55 +1,263 @@ -#Copyright 1992 by the ANSI figForth Development Group +#Makefile for Gforth -RM = echo 'Trying to remove' -GCC = gcc -FORTH = gforth -CC = gcc -MAKE = gmake -XCFLAGS = -XDEFINES = -SWITCHES = $(XCFLAGS) $(XDEFINES) -DDEFAULTBIN='"'`pwd`'"' #-DNDEBUG #turn off assertions -CFLAGS = -O4 -Wall $(SWITCHES) +#Copyright (C) 1995-1997 Free Software Foundation, Inc. -#-Xlinker -n puts text and data into the same 256M region -#John Wavrik should use -Xlinker -N to get a writable text (executable) -LDFLAGS = -Xlinker -N -LDLIBS = -lm +#This file is part of Gforth. -EMACS = emacs +#Gforth is free software; you can redistribute it and/or +#modify it under the terms of the GNU General Public License +#as published by the Free Software Foundation; either version 2 +#of the License, or (at your option) any later version. + +#This program is distributed in the hope that it will be useful, +#but WITHOUT ANY WARRANTY; without even the implied warranty of +#MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.#See the +#GNU General Public License for more details. + +#You should have received a copy of the GNU General Public License +#along with this program; if not, write to the Free Software +#Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +# To change the values of `make' variables: instead of editing Makefiles, +# (1) if the variable is set in `config.status', edit `config.status' +# (which will cause the Makefiles to be regenerated when you run `make'); +# (2) otherwise, pass the desired values on the `make' command line. + +#gforth version +VERSION_MAJOR=0 +VERSION_MINOR=3 +VERSION_RELEASE=1 +VERSION =$(VERSION_MAJOR).$(VERSION_MINOR).$(VERSION_RELEASE) +DOSVERSION=$(VERSION_MAJOR)$(VERSION_MINOR)$(VERSION_RELEASE) +SHELL = /bin/sh +RM = rm +RMTREE = rm -rf +CP = cp +TAR = tar cf - +INSTALL = @INSTALL@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_DATA = @INSTALL_DATA@ +LN_S = @LN_S@ +GCC = @CC@ +CC = $(GCC) +PATHSEP = @PATHSEP@ +FORTHPATH = $(libdir)/gforth/site-forth$(PATHSEP)$(datadir)/gforth/site-forth$(PATHSEP)$(libdir)/gforth/$(VERSION)$(PATHSEP)$(datadir)/gforth/$(VERSION)$(PATHSEP). +FORTHSIZES = @FORTHSIZES@ +FORTH = ./gforth -p $(FORTHPATH)$(PATHSEP)$(srcdir) +FORTHKFLAGS= -p .$(PATHSEP)$(srcdir) -i ./kernel.fi +FORTHK = ./gforth $(FORTHKFLAGS) +FORTHP = ./gforth -i ./kernel.fi +STRIP = strip +TEXI2DVI = texi2dvi +DVI2PS = dvips -D300 +#you can get texi2html from http://wwwcn.cern.ch/dci/texi2html/ +TEXI2HTML = texi2html +MAKEINFO = makeinfo +XCFLAGS = @CFLAGS@ +XDEFINES = @DEFS@ +SWITCHES = $(XCFLAGS) $(XDEFINES) #-DNDEBUG #turn off assertions +ENGINE_FLAGS = @ENGINE_FLAGS@ -fno-defer-pop -fcaller-saves +DEBUGFLAG = @DEBUGFLAG@ +CFLAGS = $(DEBUGFLAG) -I$(srcdir)/engine -I$(srcdir) -O4 -Wall $(SWITCHES) -DDEFAULTPATH=\"$(FORTHPATH)\" -INCLUDES = forth.h io.h +#John Wavrik should use -Xlinker -N to get a writable text (executable) +XLDFLAGS = @LDFLAGS@ +GCCLDFLAGS = @GCCLDFLAGS@ +LDFLAGS = $(DEBUGFLAG) $(XLDFLAGS) $(GCCLDFLAGS) +LDLIBS = @LIBS@ + +VPATH = @srcdir@ +prefix = @prefix@ +exec_prefix = @exec_prefix@ +srcdir = @srcdir@ +bindir = $(exec_prefix)/bin +#read-only architecture-independent files +datadir = $(prefix)/share +#read-only architecture-dependent non-ascii files +libdir = $(prefix)/lib +infodir = $(prefix)/info +mandir = $(prefix)/man +man1dir= $(mandir)/man1 +man1ext= .1 +#older emacses have their site-lisp in $(libdir)/emacs/ +emacssitelispdir=$(datadir)/emacs/site-lisp + +INCLUDES = engine/CVS engine/forth.h engine/threaded.h engine/io.h + +KERN_SRC = \ + kernel/CVS \ + kernel/aliases0.fs \ + kernel/aliases.fs \ + kernel/args.fs \ + kernel/cond.fs \ + kernel/cond-old.fs \ + cross.fs \ + kernel/errore.fs \ + kernel/files.fs \ + kernel/require.fs \ + kernel/paths.fs \ + kernel/kernel.fs \ + kernel/main.fs \ + kernel/prim0.fs \ + search.fs \ + kernel/special.fs \ + kernel/tools.fs \ + kernel/toolsext.fs \ + kernel/vars.fs \ + kernel/accept.fs \ + kernel/basics.fs \ + kernel/interp.fs \ + kernel/io.fs \ + kernel/license.fs \ + kernel/nio.fs \ + kernel/saccept.fs + +GFORTH_FI_SRC = \ + assert.fs \ + blocked.fb \ + blocks.fs \ + bufio.fs \ + debug.fs \ + debugs.fs \ + savesys.fs \ + environ.fs \ + errors.fs \ + extend.fs \ + float.fs \ + glocals.fs \ + hash.fs \ + history.fs \ + intcomp.fs \ + locals.fs \ + look.fs \ + search.fs \ + see.fs \ + see-ext.fs \ + source.fs \ + startup.fs \ + struct.fs \ + stuff.fs \ + tasker.fs \ + termsize.fs \ + vt100.fs \ + vt100key.fs \ + wordinfo.fs \ + lib.fs \ + sieve.fs \ + add.fs + +FORTH_SRC = $(KERN_SRC) $(GFORTH_FI_SRC) \ + ans-report.fs ansi.fs answords.fs \ + code.fs colorize.fs comp-i.fs \ + doskey.fs ds2texi.fs \ + etags.fs filedump.fs \ + glosgen.fs gray.fs \ + doc/makedoc.fs \ + mach16b.fs mach16l.fs mach32b.fs mach32l.fs mach64b.fs mach64l.fs \ + more.fs other.fs prims2x.fs random.fs \ + siteinit.fs \ + tt.fs sokoban.fs \ + wordsets.fs \ + test/tester.fs test/coretest.fs test/postpone.fs test/dbltest.fs \ + test/other.fs test/checkans.fs test/CVS \ + bubble.fs siev.fs matrix.fs fib.fs \ + oof.fs oofsampl.fs objects.fs + +COMPAT = compat/CVS compat/README compat/control.fs compat/anslocal.fs \ + compat/struct.fs compat/loops.fs + +ALLSUBDIRS = engine + +ARCHS = arch/m68k/machine.h \ + arch/mips/machine.h \ + arch/386/machine.h \ + arch/hppa/machine.h \ + arch/sparc/machine.h \ + arch/power/machine.h \ + arch/alpha/machine.h \ + arch/4stack/README \ + arch/4stack/asm.fs \ + arch/4stack/mach.fs \ + arch/4stack/prim.fs \ + arch/4stack/mach.sh \ + arch/4stack/relocate.fs \ + arch/misc/README \ + arch/misc/asm.fs \ + arch/misc/mach.fs \ + arch/misc/prim.fs \ + arch/misc/sim.fs \ + arch/misc/sokoban.fs \ + arch/misc/tt.fs + +SOURCES = CVS compat Makefile.in engine/Makefile.in gforthmi \ + configure.in configure config.sub config.guess \ + acconfig.h engine/config.h.in stamp-h.in \ + install-sh INSTALL INSTALL.BINDIST NEWS README ToDo BUGS model \ + COPYING Benchres aclocal.m4 \ + doc/gforth.ds doc/texinfo.tex doc/gforth.1 gforth.el \ + prim engine/engine.c engine/main.c engine/io.c engine/memcmpc.c \ + $(ARCHS) \ + engine/cache.c engine/32bit.h \ + engine/getopt.c engine/getopt1.c engine/getopt.h engine/select.c \ + engine/ecvt.c engine/memcmp.c engine/strtol.c engine/strtoul.c \ + engine/ansidecl.h engine/memmove.c \ + engine/pow10.c engine/atanh.c engine/cleanalign.c \ + engine/strerror.c engine/strsignal.c engine/strsig.c engine/dblsub.c \ + INSTALL.DOS makefile.dos engine/makefile.dos mkdosmf.sed config.bat \ + dosconf.h gforthmi.bat startup.dos history.dos mkinstalldirs \ + configure.cmd mkos2mf.sed os2conf.h makefile.os2 engine/makefile.os2 \ + gforthmi.cmd glosgen.glo doc/glossaries.doc \ + $(INCLUDES) $(FORTH_SRC) $(COMPAT) \ + testclean testdist testdist1 timings.sc + +RCS_FILES = ToDo model high-level + +GEN = gforth gforth-ditc kernel/version.fs version-stamp + +OBJECTS0 = engine/replace.a +OBJECTS = engine/engine.o engine/main.o +OBJECTS_DITC = engine/engine-ditc.o engine/main-ditc.o -FORTH_SRC = add.fs assert.fs blocks.fs bufio.fs cross.fs debug.fs \ - debugging.fs environ.fs errore.fs etags.fs extend.fs filedump.fs \ - float.fs glocals.fs glosgen.fs gray.fs hash.fs kernal.fs \ - locals-test.fs look.fs mach32b.fs mach32l.fs main.fs other.fs \ - prims2x.fs search-order.fs see.fs sieve.fs startup.fs struct.fs \ - test2.fs tools.fs toolsext.fs vars.fs vt100.fs wordinfo.fs +# things that need a working forth system to be generated +FORTH_GEN0 = prim.b engine/prim.i engine/prim_lab.i kernel/aliases.fs kernel/prim.fs +FORTH_GEN = $(FORTH_GEN0) @KERNEL@ gforth.fi +# this is used for antidependences, +FORTH_GEN1 = $(FORTH_GEN0) @kernel_fi@ -SOURCES = Makefile primitives primitives2c.el engine.c main.c io.c \ - apollo68k.h decstation.h 386.h hppa.h sparc.h gforth.ds \ - $(INCLUDES) $(FORTH_SRC) +#distributed documentation +DOCDIST = doc/gforth.info doc/gforth.info-* doc/gforth.ps -RCS_FILES = $(SOURCES) INSTALL ToDo model high-level +#stuff in a binonly distribution +BINONLYDIST = config.status Makefile gforth gforth-ditc \ + $(OBJECTS0) $(OBJECTS) $(OBJECTS_DITC)\ + machine/machine.h engine/config.h kernel.fi \ + stamp-h engine/version.h kernel/version.fs version-stamp \ + INSTALL.BINDIST -GEN = gforth +KERNLS = kernl16b.fi- kernl16l.fi- \ + kernl32b.fi- kernl32l.fi- \ + kernl64b.fi- kernl64l.fi- -GEN_PRECIOUS = primitives.i prim_labels.i primitives.b aliases.fs +GEN_PRECIOUS = $(FORTH_GEN) $(KERNLS) doc/gforth.texi doc/gforth.dvi doc/gforth.ps Makefile configure -OBJECTS = engine.o io.o main.o +#standards.info recommends this: +.SUFFIXES: +.SUFFIXES: .c .o -# things that need a working forth system to be generated -# this is used for antidependences, -FORTH_GEN = primitives.i prim_labels.i aliases.fs \ - kernl32l.fi kernl32b.fi gforth.texi +all: kernel/version.fs more + +#this rule avoids remaking everything after minor changes in Makefile.in +version: Makefile.in + if test -r $@ && test x'$(VERSION)' = x`cat $@` ; then true ; else echo $(VERSION) > $@ ; fi -all: - if [ ! -x gforth ]; then $(MAKE) first; fi - $(MAKE) more +engine/version.h: version + echo "static char gforth_version[]=\"$(VERSION)\" ;" >$@ -first: gforth +kernel/version.fs: version + $(MAKE) gforth + echo ": version-string s\" $(VERSION)\" ;" >$@ -more: gforth $(FORTH_GEN) +more: $(OBJECTS) $(FORTH_GEN) gforth #from the gcc Makefile: #"Deletion of files made during compilation. @@ -62,71 +270,355 @@ more: gforth $(FORTH_GEN) # `distclean' also deletes the files made by config. # `realclean' also deletes everything that could be regenerated automatically." -clean: - -rm $(GEN) *.o *.s - -distclean: clean - -rm machine.h machine.fs - -realclean: distclean - -rm $(GEN_PRECIOUS) - -#does not work -#gforth.tar.gz: $(SOURCES) $(GEN_PRECIOUS) CVS -# cd ..; tar cvf gforth/gforth.tar gforth/{$^}; gzip -9 gforth/gforth.tar - -gforth: $(OBJECTS) - -cp gforth gforth~ - $(GCC) $(LDFLAGS) $(OBJECTS) $(LDLIBS) -o $@ - -kernl32l.fi: main.fs search-order.fs cross.fs aliases.fs vars.fs add.fs \ - errore.fs kernal.fs extend.fs tools.fs toolsext.fs \ - mach32l.fs $(FORTH_GEN) - -cp kernl32l.fi kernl32l.fi~ - $(FORTH) -e 's" mach32l.fs"' main.fs +mostlyclean: + -$(RM) -rf *.s gforth.fi *.fi~ *.fi- kernel/version.fs *TAGS \ + doc/crossdoc.fd doc/doc.fd doc/gforth.texi doc/gforth.fns \ + doc/gforth.aux doc/gforth.cp doc/gforth.cps \ + doc/gforth.dvi doc/gforth.fn doc/gforth.ky doc/gforth.log \ + doc/gforth.pg \ + doc/gforth.toc doc/gforth.tp doc/gforth.vr html \ + gforth-$(VERSION).tar.gz \ + engine/version.h -kernl32b.fi: main.fs search-order.fs cross.fs aliases.fs vars.fs add.fs \ - errore.fs kernal.fs extend.fs tools.fs toolsext.fs \ - mach32b.fs $(FORTH_GEN) - -cp kernl32b.fi kernl32b.fi~ - $(FORTH) -e 's" mach32b.fs"' main.fs +clean: mostlyclean + -$(RM) -rf $(GEN) *.o engine/*.o engine/*.a -engine.s: engine.c primitives.i prim_labels.i machine.h $(INCLUDES) - $(GCC) $(CFLAGS) -S engine.c - -engine.o: engine.c primitives.i prim_labels.i machine.h $(INCLUDES) - -primitives.b: primitives - m4 primitives >$@ - -primitives.i : primitives.b prims2x.fs - $(FORTH) prims2x.fs -e "s\" primitives.b\" ' output-c process-file bye" >$@ - -prim_labels.i : primitives.b prims2x.fs - $(FORTH) prims2x.fs -e "s\" primitives.b\" ' output-label process-file bye" >$@ - -aliases.fs: primitives.b prims2x.fs - $(FORTH) prims2x.fs -e "s\" primitives.b\" ' output-alias process-file bye" >$@ - -primitives.fs: primitives.b prims2x.fs - $(FORTH) prims2x.fs -e "s\" primitives.b\" ' output-forth process-file bye" >$@ - -gforth.texi: gforth.ds primitives.b ds2texi.fs prims2x.fs - $(FORTH) -e "warnings off" search-order.fs struct.fs debugging.fs ds2texi.fs prims2x.fs -e "s\" primitives.b\" ' register-doc process-file s\" gforth.ds\" r/o open-file throw ds2texi bye" >$@ - -gforth.dvi: gforth.texi - tex gforth.texi - -#primitives.4th: primitives.b primitives2c.el -# $(EMACS) -batch -load primitives2c.el -funcall make-forth - -#GNU make default rules -#% :: RCS/%,v -# co $@ - -%.s : %.c $(INCLUDES) - $(CC) $(CFLAGS) -S $< -o $@ - -%.o : %.s - $(CC) $(CFLAGS) -c $< -o $@ +distclean: clean + -$(RM) machine/machine.h kernel.fi config.cache config.log \ + config.status engine/config.h Makefile stamp-h +#realclean is useless, but dangerous, so it's commented out +#realclean: distclean +# -$(RM) $(GEN_PRECIOUS) + +#mostlyclean, but also remove some of the stuff that is distributed +virtualclean: mostlyclean + -$(RM) -rf gforth.fns gforth.texi gforth.ps gforth.info* \ + gforth-$(VERSION).tar.gz config.cache *~ */*~ + +#use dist targets only when srcdir=. +dist: $(SOURCES) $(FORTH_GEN0) @KERNEL@ $(DOCDIST) + -$(RMTREE) gforth-$(VERSION) + mkdir gforth-$(VERSION) + $(TAR) $(SOURCES) $(FORTH_GEN0) @KERNEL@ $(DOCDIST) | \ + (cd gforth-$(VERSION); tar xf -) + $(TAR) gforth-$(VERSION)|gzip -9 >gforth-$(VERSION).tar.gz + -$(RMTREE) gforth-$(VERSION) + +#use dist targets only when srcdir=. +dosdist: $(SOURCES) $(FORTH_GEN0) @KERNEL@ $(DOCDIST) + -$(RMTREE) gforth.$(DOSVERSION) + mkdir gforth.$(DOSVERSION) + $(TAR) $(SOURCES) $(FORTH_GEN0) @KERNEL@ $(DOCDIST) | \ + (cd gforth.$(DOSVERSION); tar xf -) + zip -r9 gf$(DOSVERSION)dos.zip gforth.$(DOSVERSION)/* + -$(RMTREE) gforth.$(DOSVERSION) + +#A source distribution contains only the things needed to install gforth, +#without the documents. +srcdist: $(SOURCES) $(FORTH_GEN0) @KERNEL@ + -$(RMTREE) gforth-$(VERSION) + mkdir gforth-$(VERSION) + $(TAR) $(SOURCES) $(FORTH_GEN0) @KERNEL@ | \ + (cd gforth-$(VERSION); tar xf -) + $(TAR) gforth-$(VERSION)|gzip -9 >gforth-src-$(VERSION).tar.gz + -$(RMTREE) gforth-$(VERSION) + +srconlydist: $(SOURCES) + -$(RMTREE) gforth-$(VERSION) + mkdir gforth-$(VERSION) + $(TAR) $(SOURCES) | \ + (cd gforth-$(VERSION); tar xf -) + $(TAR) gforth-$(VERSION)|gzip -9 >gforth-srconly-$(VERSION).tar.gz + -$(RMTREE) gforth-$(VERSION) + +#A document distribution contains only the documents, which can be created +#with MAKE. +docdist: $(DOCDIST) + -$(RMTREE) gforth-$(VERSION) + mkdir gforth-$(VERSION) + $(TAR) $(DOCDIST) | (cd gforth-$(VERSION); tar xf -) + $(TAR) gforth-$(VERSION)|gzip -9 >gforth-doc-$(VERSION).tar.gz + -$(RMTREE) gforth-$(VERSION) + +#a binary distribution contains the complete source distribution, +# the objects, the executable and the links. the objects are there for making +# make happy. +bindist: $(SOURCES) $(FORTH_GEN0) @KERNEL@ $(DOCDIST) $(BINONLYDIST) + -$(RMTREE) gforth-$(VERSION) + mkdir gforth-$(VERSION) + $(TAR) $(SOURCES) $(FORTH_GEN0) @KERNEL@ $(DOCDIST) $(BINONLYDIST) | (cd gforth-$(VERSION); tar xf -) + strip gforth-$(VERSION)/gforth + $(TAR) gforth-$(VERSION)|gzip -9 >gforth-$(VERSION)-@host@.tar.gz + +#makes a package with only the stuff not present in the source +#package. For installation the source package is still needed! +#This is useful if you want to distribute many binary versions in +#little space (e.g., on floppy disk): Put the source package and +#all the binonly packages you are interested in on the disk. The user +#then just has to unpack the source and his favourite binonly into the +#same directory and has a full binary distribution. +binonlydist: $(SOURCES) $(FORTH_GEN0) @KERNEL@ $(DOCDIST) $(BINONLYDIST) + -$(RMTREE) gforth-$(VERSION) + mkdir gforth-$(VERSION) + $(TAR) $(BINONLYDIST) | (cd gforth-$(VERSION); tar xf -) + strip gforth-$(VERSION)/gforth + $(TAR) gforth-$(VERSION)|gzip -9 >gforth-$(VERSION)-binonly-@host@.tar.gz + + +#strip gforth, because the debugging stuff is hardly useful once +# gforth manages to execute more than a few primitives + +#install does not depend on gforth.info, because that would require +#supplying a lot of files that can be easily generated (only info is +#hard to generate) +install: gforth $(FORTH_SRC) kernel.fi gforth.fi doc/gforth.1 prim gforth.TAGS installdirs + touch $(datadir)/gforth/site-forth/siteinit.fs + -$(RM) $(bindir)/gforth $(bindir)/gforth-$(VERSION) + $(INSTALL_PROGRAM) -s gforth $(bindir) + ln $(bindir)/gforth $(bindir)/gforth-$(VERSION) + -$(INSTALL_DATA) $(srcdir)/doc/gforth.1 $(man1dir) + -for i in $(srcdir)/gforth.info*; do $(INSTALL_DATA) $$i $(infodir); done + for i in $(FORTH_SRC) prim; do \ + $(INSTALL_DATA) $(srcdir)/$$i $(datadir)/gforth/$(VERSION); \ + done + $(INSTALL_DATA) kernel.fi $(libdir)/gforth/$(VERSION) + $(RM) gforth.fi; $(MAKE) gforth.fi #gforth.fi contains some path names + $(INSTALL_DATA) gforth.fi $(libdir)/gforth/$(VERSION) + sed 's:^$(srcdir)/:$(datadir)/gforth/$(VERSION)/:' gforth.TAGS >TAGS; $(INSTALL_DATA) TAGS $(datadir)/gforth/$(VERSION) + if test -d $(emacssitelispdir); then \ + $(INSTALL_DATA) $(srcdir)/gforth.el $(emacssitelispdir); \ + else \ + echo ">>>>>Please install $(srcdir)/gforth.el in your .../emacs/site-lisp directory"; \ + fi + echo ">>>>> Please make an entry for Gforth in your info dir file; e.g.:"; \ + echo "* Gforth: (gforth). A fast interpreter for the Forth language." + +install-strip: install + +installdirs: mkinstalldirs + $(srcdir)/mkinstalldirs $(bindir) $(man1dir) $(infodir) $(libdir)/gforth/$(VERSION) $(datadir)/gforth/$(VERSION) $(libdir)/gforth/site-forth $(datadir)/gforth/site-forth + +#deinstall all files specific to this version of gforth +#to uninstall version foo, type `make uninstall VERSION=foo' +uninstall: + -$(RM) -rf $(libdir)/gforth/$(VERSION) $(datadir)/gforth/$(VERSION) $(bindir)/gforth-$(VERSION) + @echo -e "Type\n$(RM) -rf $(bindir)/gforth $(man1dir)/gforth.1 $(infodir)/gforth.info* $(datadir)/gforth $(libdir)/gforth\nto remove Gforth completely" + +check test: gforth gforth.fi + $(FORTH) test/tester.fs test/coretest.fs test/postpone.fs test/dbltest.fs -e bye + $(FORTH) test/other.fs -e bye + $(FORTH) code.fs test/checkans.fs -e bye + @echo 'Expect no differences' + $(FORTH) -m 100000 prims2x.fs -e "s\" $(srcdir)/prim.b\"' output-c process-file bye"| diff -c - $(srcdir)/engine/prim.i + +bench: gforth gforth.fi + @echo 'Each benchmark takes about 30s on a 486-66 (gcc-2.6.3 -DFORCE_REG)' + time $(FORTH) siev.fs -e "main bye" + time $(FORTH) bubble.fs -e "main bye" + time $(FORTH) -m 160000 matrix.fs -e "main bye" + time $(FORTH) fib.fs -e "main bye" + +gforth: $(OBJECTS) $(OBJECTS0) + -$(CP) gforth gforth~ + $(GCC) $(LDFLAGS) $(OBJECTS) $(OBJECTS0) $(LDLIBS) -o $@ + @GFORTH_EXE@ + +gforth-ditc: $(OBJECTS_DITC) $(OBJECTS0) + $(GCC) $(LDFLAGS) $(OBJECTS_DITC) $(OBJECTS0) $(LDLIBS) -o $@ + @GFORTHDITC_EXE@ + +kernl16l.fi-: $(KERN_SRC) kernel/version.fs mach16l.fs $(FORTH_GEN0) + $(FORTHK) -e 's" mach16l.fs"' kernel/main.fs -e "save-cross kernl16l.fi- $(bindir)/gforth-$(VERSION) bye" + +kernl16b.fi-: $(KERN_SRC) kernel/version.fs mach16b.fs $(FORTH_GEN0) + $(FORTHK) -e 's" mach16b.fs"' kernel/main.fs -e "save-cross kernl16b.fi- $(bindir)/gforth-$(VERSION) bye" + +kernl32l.fi-: $(KERN_SRC) kernel/version.fs mach32l.fs $(FORTH_GEN0) + $(FORTHK) -e 's" mach32l.fs"' kernel/main.fs -e "save-cross kernl32l.fi- $(bindir)/gforth-$(VERSION) bye" + +kernl32b.fi-: $(KERN_SRC) kernel/version.fs mach32b.fs $(FORTH_GEN0) + $(FORTHK) -e 's" mach32b.fs"' kernel/main.fs -e "save-cross kernl32b.fi- $(bindir)/gforth-$(VERSION) bye" + +kernl64l.fi-: $(KERN_SRC) kernel/version.fs mach64l.fs $(FORTH_GEN0) + $(FORTHK) -e 's" mach64l.fs"' kernel/main.fs -e "save-cross kernl64l.fi- $(bindir)/gforth-$(VERSION) bye" + +kernl64b.fi-: $(KERN_SRC) kernel/version.fs mach64b.fs $(FORTH_GEN0) + $(FORTHK) -e 's" mach64b.fs"' kernel/main.fs -e "save-cross kernl64b.fi- $(bindir)/gforth-$(VERSION) bye" + +kernl-%.fi: arch/%/mach.fs $(KERN_SRC) kernel/version.fs $(FORTH_GEN0) \ + arch/%/prim.fs arch/%/asm.fs + $(FORTHK) -e 's" $<"' kernel/main.fs -e "save-cross $@- $(bindir)/gforth-$(VERSION) bye" + if [ -f `echo $< | sed s/fs/sh/` ]; \ + then sh `echo $< | sed s/fs/sh/` $@; \ + else $(CP) $@- $@; \ + fi + +kernl16b.fi: $(KERNLS) + -$(CP) kernl16b.fi kernl16b.fi~ + -$(CP) kernl16b.fi- kernl16b.fi + +kernl16l.fi: $(KERNLS) + -$(CP) kernl16l.fi kernl16l.fi~ + -$(CP) kernl16l.fi- kernl16l.fi + +kernl32b.fi: $(KERNLS) + -$(CP) kernl32b.fi kernl32b.fi~ + -$(CP) kernl32b.fi- kernl32b.fi + +kernl32l.fi: $(KERNLS) + -$(CP) kernl32l.fi kernl32l.fi~ + -$(CP) kernl32l.fi- kernl32l.fi + +kernl64b.fi: $(KERNLS) + -$(CP) kernl64b.fi kernl64b.fi~ + -$(CP) kernl64b.fi- kernl64b.fi + +kernl64l.fi: $(KERNLS) + -$(CP) kernl64l.fi kernl64l.fi~ + -$(CP) kernl64l.fi- kernl64l.fi + +#kernl%.fi: kernl%.fi- $(KERNLS) +# -$(CP) $@ $@~ +# -$(CP) $< $@ + +gforth.fi: @kernel_fi@ gforthmi gforth gforth-ditc $(GFORTH_FI_SRC) + GFORTHD="./gforth-ditc -p .$(PATHSEP)$(srcdir)" GFORTH="./gforth-ditc -p .$(PATHSEP)$(srcdir) -i kernel.fi startup.fs" $(srcdir)/gforthmi gforth.fi $(FORTHSIZES) $(FORTHKFLAGS) startup.fs + +#TAGS is a GNU standard target +TAGS: gforth.TAGS + $(CP) gforth.TAGS $@ + +gforth.TAGS: @kernel_fi@ gforth $(GFORTH_FI_SRC) prim.TAGS + $(FORTHK) etags.fs startup.fs -e bye + cat TAGS prim.TAGS kernel.TAGS >gforth.TAGS + rm TAGS + +engine/replace.a: + cd engine; $(MAKE) replace.a + +engine.s: engine/engine.c engine/prim.i engine/prim_lab.i machine/machine.h engine/threaded.h $(INCLUDES) engine/config.h + $(GCC) $(CFLAGS) $(ENGINE_FLAGS) -S $(srcdir)/engine/engine.c + +engine/engine.o: engine/engine.c engine/prim.i engine/prim_lab.i machine/machine.h engine/threaded.h $(INCLUDES) engine/config.h + $(GCC) $(CFLAGS) $(ENGINE_FLAGS) -c $(srcdir)/engine/engine.c -o $@ + +engine/engine-ditc.o: engine/engine.c engine/prim.i engine/prim_lab.i machine/machine.h engine/threaded.h $(INCLUDES) engine/config.h + $(GCC) $(CFLAGS) $(ENGINE_FLAGS) -DDOUBLY_INDIRECT -o $@ -c $(srcdir)/engine/engine.c + +engine/main.o: engine/main.c machine/machine.h engine/threaded.h $(INCLUDES) engine/config.h engine/version.h + $(GCC) $(CFLAGS) $(ENGINE_FLAGS) -o $@ -c $(srcdir)/engine/main.c + +engine/main-ditc.o: engine/main.c machine/machine.h engine/threaded.h $(INCLUDES) engine/config.h engine/version.h + $(GCC) $(CFLAGS) $(ENGINE_FLAGS) -DDOUBLY_INDIRECT -o $@ -c $(srcdir)/engine/main.c + +engine/strtoul.o: strtoul.c strtol.c + +prim.b: prim + m4 -s $(srcdir)/prim >$@ + +engine/prim.i: prim.b prims2x.fs + $(FORTHK) prims2x.fs -e "s\" prim.b\" ' output-c process-file bye" >$@- + $(CP) $@- $@ + $(RM) $@- + +engine/prim_lab.i: prim.b prims2x.fs + $(FORTHK) prims2x.fs -e "s\" prim.b\" ' output-label process-file bye" >$@- + $(CP) $@- $@ + $(RM) $@- + +kernel/aliases.fs: prim.b prims2x.fs kernel/aliases0.fs + $(CP) kernel/aliases0.fs $@- + $(FORTHK) prims2x.fs -e "s\" prim.b\" ' output-alias process-file bye" >>$@- + $(CP) $@- $@ + $(RM) $@- + +kernel/prim.fs: prim.b prims2x.fs kernel/prim0.fs + $(CP) kernel/prim0.fs kernel/prim.fs- + $(FORTHK) prims2x.fs -e "s\" prim.b\" ' output-forth process-file bye" >>$@- + $(CP) $@- $@ + $(RM) $@- + +prim.TAGS: prim.b prims2x.fs + $(FORTHK) prims2x.fs -e "s\" $(srcdir)/prim.b\" ' output-tag process-file bye" >$@- + $(CP) $@- $@ + $(RM) $@- + +doc/doc.fd: doc/makedoc.fs $(GFORTH_FI_SRC) + $(FORTHK) -e "s\" doc/doc.fd\"" doc/makedoc.fs startup.fs code.fs -e bye + +doc/crossdoc.fd: $(KERN_SRC) kernel/version.fs $(FORTH_GEN0) + $(FORTHK) -e 's" mach32l.fs"' kernel/main.fs -e bye + +doc/gforth.texi: doc/gforth.ds prim.b ds2texi.fs prims2x.fs \ + doc/doc.fd doc/crossdoc.fd + $(FORTHK) -m 100000 ds2texi.fs prims2x.fs -e "s\" $(srcdir)/prim.b\" ' register-doc process-file" doc/crossdoc.fd doc/doc.fd -e "s\" $(srcdir)/doc/gforth.ds\" r/o open-file throw ds2texi bye" >$@- + $(CP) $@- $@ + $(RM) $@- + +checkdoc: doc/gforth.ds prim.b ds2texi.fs prims2x.fs doc/doc.fd doc/crossdoc.fd answords.fs doc/gforth.texi + $(FORTHK) ds2texi.fs prims2x.fs -e "s\" $(srcdir)/prim.b\" ' register-doc process-file" doc/crossdoc.fd doc/doc.fd answords.fs -e bye + -grep unknown doc/gforth.texi + +dvi: doc/gforth.dvi + +doc/gforth.dvi doc/gforth.fns: doc/gforth.texi + cd doc; $(TEXI2DVI) gforth.texi + +doc/gforth.ps: doc/gforth.dvi + $(DVI2PS) doc/gforth.dvi -o $@ + +info: doc/gforth.info + +doc/gforth.info doc/gforth.info-*: doc/gforth.texi + -cd doc; $(MAKEINFO) gforth.texi + +html: doc/gforth.texi + -$(RM) html/* + -mkdir html + cd html; $(TEXI2HTML) -menu -split_node ../doc/gforth.texi + +doc: doc/gforth.ps html + +# For an explanation of the following Makefile rules, see node +# `Automatic Remaking' in GNU Autoconf documentation. +$(srcdir)/configure: configure.in + cd $(srcdir) && autoconf + +# autoheader might not change config.h.in, so touch a stamp file. +config.h.in: stamp-h.in +stamp-h.in: configure.in acconfig.h + cd $(srcdir) && autoheader + echo timestamp > $(srcdir)/stamp-h.in + +engine/config.h: stamp-h +stamp-h: config.h.in config.status + CONFIG_FILES=$@ CONFIG_HEADERS=engine/config.h ./config.status + echo > stamp-h +Makefile: Makefile.in config.status + CONFIG_FILES="$@ engine/$@" CONFIG_HEADERS=engine/config.h ./config.status + +config.status: configure + ./config.status --recheck + + +#create files for DOS, because DOS cannot do it itself +makefile.dos: mkdosmf.sed Makefile.in + sed -f mkdosmf.sed makefile.dos + sed -f mkdosmf.sed engine/makefile.dos + +makefile.os2: mkos2mf.sed Makefile.in + sed -f mkos2mf.sed makefile.os2 + sed -f mkos2mf.sed engine/makefile.os2 + echo '%.o: %.c' >>makefile.os2 + echo ' $$(GCC) $$(CFLAGS) -c $$<' >>makefile.os2 + echo '%.o: %.c' >>engine/makefile.os2 + echo ' $$(GCC) $$(CFLAGS) -c $$<' >>engine/makefile.os2 + +# history is a little bit different now! JAW +#history.dos: history.fs Makefile.in +# sed -e "s,~/\.gforth-history,/gforth.his,g" history.dos + +startup.dos: startup.fs Makefile.in + sed -e "s/\\\\ include doskey/include doskey/g" \ + -e "s/include vt100key/\\\\ include vt100key/g" startup.dos