File:  [gforth] / gforth / INSTALL
Revision 1.34: download - view: text, annotated - select for diffs
Sun Mar 9 17:16:38 2003 UTC (16 years, 3 months ago) by anton
Branches: MAIN
CVS tags: v0-6-1, v0-6-0, HEAD
updated version number
documentation changes
minor changes

Copyright (C) 2003 Free Software Foundation, Inc.
This file is free documentation; the Free Software Foundation gives
unlimited permission to copy, distribute and modify it.

You need gcc version 2.0 or later to compile gforth.

First, type

./configure

(see Section Configuration Options below for details).

After configuration, type

make

Now you can check whether your shiny new Forth system works. Say

make check

You can run some benchmarks with

make bench

and compare them with the results in Benchres and in the manual.

If everything is all right, you may want to install gforth. Type

make install

For paper documentation, print gforth.ps (a Postscript file (300dpi
fonts, i.e., it works, but does not produce best quality on better
printers)), or say

make gforth.dvi

and print the resulting file gforth.dvi. You can also get the
documentation in HTML format by typing

make html

If you prefer plain ASCII documentation, you can 

make doc/gforth.txt

or just concatenate the files gforth.info-* ('cat gforth.info-*' under
Unix); the result of the latter option is a little worse.

You can find binary distributions, documentation in HTML and plain
text format and information on known installation problems at
http://www.complang.tuwien.ac.at/forth/gforth/.


		Configuration Options

If you use GNU make, you can build in a directory different from the
source directory by changing to the build directory and invoking
configure thus:

$srcdir/configure

where $srcdir is the source directory. (Note that we tested this only
for installation; i.e., if you want to hack the Gforth sources, you
should probably build in the source directory).

configure has the following useful parameters:
  --prefix=PREFIX         install architecture-independent files in PREFIX
                          [default: /usr/local]
  --exec-prefix=PREFIX    install architecture-dependent files in PREFIX
                          [default: same as prefix]
  --enable-force-reg      Use explicit register declarations if they appear in
                          the machine.h file. This can cause a good speedup,
                          but also incorrect code with some gcc versions on
                          some processors (default disabled).
  --help: tells you about other parameters.

The file Benchres shows which combination of the -enable options we
tried gave the best results for various machines.

If you don't like the defaults for the installation directories, you
should override them already during configure.  E.g., if you want to
install in the /gnu hierarchy instead of in the default /usr/local
hierarchy, say

./configure --prefix=/gnu

Moreover, if your GCC is not called gcc (but, e.g., gcc-2.7.1), you
should say so during configuration. E.g.:

env CC=gcc-2.7.1 ./configure

You can also pass additional options to gcc in this way, e.g., if you
want to generate an a.out executable under Linux with gcc-2.7.0:

env "CC=gcc -b i486-linuxaout -V 2.7.0" ./configure

You can change the sizes of the various areas used in the default
image `gforth.fi' by passing the appropriate Gforth command line
options in the FORTHSIZES environment variable:

env "FORTHSIZES=--dictionary-size=256k --data-stack-size=16k --fp-stack-size=15872b --return-stack-size=15k --locals-stack-size=14848b" ./configure

The line above reaffirms the default sizes. Note that the locals
stack area is also used as input buffer stack.

If C's "long long" do not work properly on your machine (i.e., if the
tests involving double-cell numbers fail), you can build Gforth such
that it does not use "long long":

env ac_cv_sizeof_long_long=0 ./configure


			Cross-Installation

You need a cross-compilation toolchain for your target including gcc
(2.0 or later).

The first step in cross-installation is the cross-configuration.  A
few tests made by the configure script do not work in a
cross-compilation situation. You have to provide the results of these
tests by hand. E.g., if you compile for a 386 architecture processor:

env ac_cv_sizeof_char_p=4 ac_cv_sizeof_char=1 ac_cv_sizeof_short=2 ac_cv_sizeof_int=4 ac_cv_sizeof_long=4 ac_cv_sizeof_long_long=8 ac_cv_sizeof_intptr_t=4 ac_cv_sizeof_int128_t=0 ac_cv_c_bigendian=no ./configure

The ac_cv_sizeof_... variables give the sizes of various C types;
ac_cv_sizeof_char_p is the same as "sizeof(char*)" in C code. The
ac_cv_c_bigendian variable gives the byte order.

After the cross-configuration you type

make gforths

This produces the gforth engines for the target.

The next step is to transfer everything to the target; on the target,
you do

make

to complete building gforth.  If you do not have a make on the target,
run

make -n

on the host; manually execute on the target the last command output by
"make -n" (GFORTHD=...); the other commands output by "make -n" are
not necessary unless you have changed the Gforth sources.  You can
then check and benchmark Gforth with

make check
make bench

or equivalent.  Finally, perform

make install

or the equivalent commands on the target.


		Preloading installation-specific code

If you want to have some installation-specific files loaded when
Gforth starts (e.g., an assembler for your processor), put commands
for loading them into /usr/local/share/gforth/site-forth/siteinit.fs
(if the commands work for all architectures) or
/usr/local/lib/gforth/site-forth/siteinit.fs (for
architecture-specific commands);
/usr/local/lib/gforth/site-forth/siteinit.fs takes precedence if both
files are present (unless you change the search path). The file names
given above are the defaults; if you have changed the prefix, you have
to replace "/usr/local" in these names with your prefix.

By default, the installation procedure creates an empty
/usr/local/share/gforth/site-forth/siteinit.fs if there is no such
file.

If you change the siteinit.fs file, you should run "make install"
again for the changes to take effect (Actually, the part of "make
install" starting with "rm gforth.fi" is sufficient).


		Multiple Versions and Deinstallation

Several versions of Gforth can be installed and used at the same
time. Version `foo' can be invoked with `gforth-foo'. We recommend to
keep the old version for some time after a new one has been installed.

You can deinstall this version of Gforth with 'make uninstall' and
version foo with 'make uninstall VERSION=foo'. 'make uninstall' also
tells you how to uninstall Gforth completely.


		Installing Info Files

Info is the GNU project on-line documentation format. You can read
info files either from within Emacs (Ctrl-h i) or using the
stand-alone Info reader, 'info'.

If you use the default install root of '/usr/local' then the info
files will be installed in '/usr/local/info'.

Many GNU/Linux distributions are set up to put all of their
documentation in '/usr/info', in which case you might have to do a
couple of things to get your environment set up to accommodate files
in both areas:

1. Add an INFOPATH environment variable. The easiest place to do
this is '/etc/profile', right next to PATH and MANPATH:

INFOPATH=/usr/local/info:/usr/info

2. Create a file called 'dir' in 'usr/local/info'. Use the file
'/usr/info/dir' as a template. You can add the line for gforth
manually, or use '/sbin/install-info' (man install-info for details).


FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>