Diff for /gforth/INSTALL between versions 1.28 and 1.37

version 1.28, 1998/12/26 15:41:24 version 1.37, 2007/06/02 16:32:10
Line 1 Line 1
   Copyright (C) 2003 Free Software Foundation, Inc.
   This file is free documentation; the Free Software Foundation gives
   unlimited permission to copy, distribute and modify it.
   
   
                   Prerequisites
   
 You need gcc version 2.0 or later to compile gforth.  You need gcc version 2.0 or later to compile gforth.
   
   For the (documented) libcc.fs C interface you need a C compiler at
   run-time.
   
   For the (undocumented ) lib.fs C interface you need to install either
   the ffcall libraries or the libffi library.  Libffi comes with recent
   gccs, ffcall can be found on
   
      ftp://ftp.santafe.edu/pub/gnu/ffcall-1.8.tar.gz (USA) 
      ftp://ftp.ilog.fr/pub/Users/haible/gnu/ffcall-1.8.tar.gz (Europe) 
   
   On many architectures (exceptions: 386, PPC, MIPS, Alpha) you need gdb
   at run-time in order for the disassembler to work.
   
   
                   Building and Installing
   
 First, type  First, type
   
 ./configure  ./configure
Line 12  make Line 35  make
   
 Now you can check whether your shiny new Forth system works. Say  Now you can check whether your shiny new Forth system works. Say
   
 make test  make check
   
 You can run some benchmarks with  You can run some benchmarks with
   
Line 24  If everything is all right, you may want Line 47  If everything is all right, you may want
   
 make install  make install
   
 You have to make an entry in the info directory file manually.  
   
 For paper documentation, print gforth.ps (a Postscript file (300dpi  For paper documentation, print gforth.ps (a Postscript file (300dpi
 fonts, i.e., it works, but does not produce best quality on better  fonts, i.e., it works, but does not produce best quality on better
 printers)), or say  printers)), or say
Line 70  configure has the following useful param Line 91  configure has the following useful param
                           the machine.h file. This can cause a good speedup,                            the machine.h file. This can cause a good speedup,
                           but also incorrect code with some gcc versions on                            but also incorrect code with some gcc versions on
                           some processors (default disabled).                            some processors (default disabled).
   --enable-direct-threaded      Force direct threading. This may not work on  
                                 some machines and may cause slowdown on others.  
                                 (default processor-dependent)  
   --enable-indirect-threaded    Force indirect threading. This can cause a  
                                 slowdown on some machines.  
                                 (default processor-dependent)  
   --with-debug     specifies option -g to compile with debug info (default)  
   --without-debug  omits the -g switch and creates smaller images on  
                    machines where strip has problems with gcc style  
                    debugging informations.  
   --help: tells you about other parameters.    --help: tells you about other parameters.
   
 The file Benchres shows which combination of the -enable options we  The file Benchres shows which combination of the -enable options we
Line 95  hierarchy, say Line 106  hierarchy, say
 Moreover, if your GCC is not called gcc (but, e.g., gcc-2.7.1), you  Moreover, if your GCC is not called gcc (but, e.g., gcc-2.7.1), you
 should say so during configuration. E.g.:  should say so during configuration. E.g.:
   
 env CC=gcc-2.7.1 ./configure  ./configure CC=gcc-2.7.1
   
 You can also pass additional options to gcc in this way, e.g., if you  You can also pass additional options to gcc in this way, e.g., if you
 want to generate an a.out executable under Linux with gcc-2.7.0:  want to generate an a.out executable under Linux with gcc-2.7.0:
   
 env "CC=gcc -b i486-linuxaout -V 2.7.0" ./configure  ./configure CC="gcc -b i486-linuxaout -V 2.7.0"
   
 You can change the sizes of the various areas used in the default  You can change the sizes of the various areas used in the default
 image `gforth.fi' by passing the appropriate Gforth command line  image `gforth.fi' by passing the appropriate Gforth command line
 options in the FORTHSIZES environment variable:  options in the FORTHSIZES environment variable:
   
 env "FORTHSIZES=--dictionary-size=256k --data-stack-size=16k --fp-stack-size=15872b --return-stack-size=15k --locals-stack-size=14848b" ./configure  ./configure "FORTHSIZES=--dictionary-size=256k --data-stack-size=16k --fp-stack-size=15872b --return-stack-size=15k --locals-stack-size=14848b"
   
 The line above reaffirms the default sizes. Note that the locals  The line above reaffirms the default sizes. Note that the locals
 stack area is also used as input buffer stack.  stack area is also used as input buffer stack.
Line 115  If C's "long long" do not work properly Line 126  If C's "long long" do not work properly
 tests involving double-cell numbers fail), you can build Gforth such  tests involving double-cell numbers fail), you can build Gforth such
 that it does not use "long long":  that it does not use "long long":
   
 env ac_cv_sizeof_long_long=0 ./configure  ./configure ac_cv_sizeof_long_long=0
   
   
                           Cross-Installation
   
                         Cross-Configuration  You need a cross-compilation toolchain for your target including gcc
   (2.0 or later).
   
 A few tests made by the configure script do not work in a  The first step in cross-installation is the cross-configuration.  A
   few tests made by the configure script do not work in a
 cross-compilation situation. You have to provide the results of these  cross-compilation situation. You have to provide the results of these
 tests by hand. E.g., if you compile for a 386 architecture processor:  tests by hand. E.g., if you compile for an ARM:
   
 env ac_cv_sizeof_char_p=4 ac_cv_sizeof_short=2 ac_cv_sizeof_int=4 ac_cv_sizeof_long=4 ac_cv_sizeof_long_long=8 ac_cv_c_bigendian=no ./configure  env skipcode=".skip 16" ac_cv_sizeof_char_p=4 ac_cv_sizeof_char=1 \
   ac_cv_sizeof_short=2 ac_cv_sizeof_int=4 ac_cv_sizeof_long=4 \
   ac_cv_sizeof_long_long=8 ac_cv_sizeof_intptr_t=4 ac_cv_sizeof_int128_t=0 \
   ac_cv_c_bigendian=no ./configure CC=arm-elf-gcc --host=arm-linux
   
 The ac_cv_sizeof_... variables give the sizes of various C types;  The ac_cv_sizeof_... variables give the sizes of various C types;
 ac_cv_sizeof_char_p is the same as "sizeof(char*)" in C code. The  ac_cv_sizeof_char_p is the same as "sizeof(char*)" in C code. The
 ac_cv_c_bigendian variable gives the byte order.  ac_cv_c_bigendian variable gives the byte order.  The skipcode
   specifies how to skip 16 bytes in the code (use "skipcode=no" to
   disable skipping and dynamic native code generation).
   
   After the cross-configuration you type
   
   make gforths
   
   This produces the gforth engines for the target.
   
   The next step is to transfer everything to the target; on the target,
   you do
   
   make
   
   to complete building gforth.  If you do not have a make on the target,
   run
   
   make -n
   
   on the host; manually execute on the target the last command output by
   "make -n" (GFORTHD=...); the other commands output by "make -n" are
   not necessary unless you have changed the Gforth sources.  You can
   then check and benchmark Gforth with
   
   make check
   make bench
   
   or equivalent.  Finally, perform
   
   make install
   
   or the equivalent commands on the target.
   
   
                 Preloading installation-specific code                  Preloading installation-specific code
Line 162  keep the old version for some time after Line 212  keep the old version for some time after
 You can deinstall this version of Gforth with 'make uninstall' and  You can deinstall this version of Gforth with 'make uninstall' and
 version foo with 'make uninstall VERSION=foo'. 'make uninstall' also  version foo with 'make uninstall VERSION=foo'. 'make uninstall' also
 tells you how to uninstall Gforth completely.  tells you how to uninstall Gforth completely.
   
   
                   Installing Info Files
   
   Info is the GNU project on-line documentation format. You can read
   info files either from within Emacs (Ctrl-h i) or using the
   stand-alone Info reader, 'info'.
   
   If you use the default install root of '/usr/local' then the info
   files will be installed in '/usr/local/info'.
   
   Many GNU/Linux distributions are set up to put all of their
   documentation in '/usr/info', in which case you might have to do a
   couple of things to get your environment set up to accommodate files
   in both areas:
   
   1. Add an INFOPATH environment variable. The easiest place to do
   this is '/etc/profile', right next to PATH and MANPATH:
   
   INFOPATH=/usr/local/info:/usr/info
   
   2. Create a file called 'dir' in 'usr/local/info'. Use the file
   '/usr/info/dir' as a template. You can add the line for gforth
   manually, or use '/sbin/install-info' (man install-info for details).

Removed from v.1.28  
changed lines
  Added in v.1.37


FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>