You need DJ Delorie's port of GCC to DOS (DJGPP 2.0) to compile
Gforth. DJGPP provides a DPMI client that allows to use the 32-bit
features of the 80386, but on the other hand it requires at least a
386. A DPMI host is also part of the DJGPP 2.0 package, this is
required if you don't have a DPMI host yourself (Windows/OS/2/Linux
DOS-box, Quemm or others).
Gforth hasn't been tested with EMX, using EMX will require some
changes in the console IO part. For OS/2 EMX supports POSIX-style tty,
so it might just compile out of the box. If you don't want to install
the DJGPP package (quite large), look for a binary distribution of
Gforth for DOS. You also must have a version of GNU make, because DOS
make programs are likely to have problems with the Makefile. If you
want to change Gforth, you may need GNU m4, too. Because DJGPP
provides use of long filenames under Windows 95, you should unpack the
gforth package with a Windows-95-aware archiver (those from DJGPP come
in mind), because otherwise gforth will not find the necessary
files. There is no such problem when using MS-DOS prior 7.x.
If you don't bother and want to make it yourself, type
configure has the following useful parameters:
--enable-force-reg Use explicit register declarations if they appear in
the machine.h file. This can cause a good speedup,
but also incorrect code with some gcc versions on
some processors (default disabled).
--enable-direct-threaded Force direct threading. This may not work on
some machines and may cause slowdown on others.
--enable-indirect-threaded Force indirect threading. This can cause a
slowdown on some machines.
After covering all inconveniences, type
Now you can check whether your shiny new Forth system works. Say
You can run some benchmarks with
and compare them with the results in Benchres and in the manual.
Don't try to do "make install", it won't work, either. It is not possible to
"make dist" or "make bindist", too, because of the limitations of DOS
Add the following entry to your Autoexec.bat:
SET GFORTHPATH=<your gforth source directory>;.
Use / instead of \ in your gforth source directory. Gforth now uses
';' as path separator, so you won't have problems with DOS pathes that
may contain ':', which is the default path separator in Unix.
For paper documentation, print gforth.ps (a Postscript file (300dpi
fonts, i.e., it works, but does not produce best quality on better
printers)), or say
and print the resulting file gforth.dvi (you need TeX for that! But
with TeX you can print it even if you don't have a Postscript printer
nor Ghostscript). You could be able to make a html version of the
document, but AFAIK there is no texi2html for DOS available, as there
is no perl available.