version 1.1, 1995/12/11 13:15:18
|
version 1.2, 1996/09/23 20:41:58
|
Line 1
|
Line 1
|
You need DJ Delorie's port of GCC to DOS (DJGPP) to compile Gforth. DJGPP |
You need DJ Delorie's port of GCC to DOS (DJGPP 2.0) to compile |
provides a DOS extender (GO32) that allows to use the 32-bit features of |
Gforth. DJGPP provides a DPMI client that allows to use the 32-bit |
the 80386, but on the other hand it requires at least an 386. |
features of the 80386, but on the other hand it requires at least a |
|
386. A DPMI host is also part of the DJGPP 2.0 package, this is |
|
required if you don't have a DPMI host yourself (Windows/OS/2/Linux |
|
DOS-box, Quemm or others). |
|
|
Gforth hasn't been tested with EMX, using EMX will require some changes in |
Gforth hasn't been tested with EMX, using EMX will require some changes in |
the console IO part. If you don't want to install this package (quite |
the console IO part. If you don't want to install the DJGPP package (quite |
large), look for a binary distribution of Gforth for DOS. You must have a |
large), look for a binary distribution of Gforth for DOS. You must have a |
version of GNU make, because DOS make programs are likely to have problems |
version of GNU make, because DOS make programs are likely to have problems |
with the Makefile. If you want to change Gforth, you may need GNU m4, too. |
with the Makefile. If you want to change Gforth, you may need GNU m4, too. |
Line 12 If you don't bother and want to make it
|
Line 15 If you don't bother and want to make it
|
|
|
configure |
configure |
|
|
There are no options for configure, because DOS can't execute a real |
configure has the following useful parameters: |
configure script, all the configuring stuff is done on a real operating |
--enable-force-reg Use explicit register declarations if they appear in |
system. If you want to change something (e.g. use FORCE_REG or |
the machine.h file. This can cause a good speedup, |
DIRECT_THREADED), you have to change the makefile yourself. Be careful! DOS |
but also incorrect code with some gcc versions on |
command line arguments are limited to an overall size of 126 bytes, so |
some processors (default disabled). |
adding a new define in the makefile will make it too long. In this case add |
--enable-direct-threaded Force direct threading. This may not work on |
the define at the beginning of machine.h instead, or create a file |
some machines and may cause slowdown on others. |
containing all extra options, and add @<filename> to the defines (move the |
(default processor-dependent) |
-DDEFAULTPATH-define into this file, and it will fit into the command line). |
--enable-indirect-threaded Force indirect threading. This can cause a |
|
slowdown on some machines. |
|
(default processor-dependent) |
|
|
After covering all inconveniences, type |
After covering all inconveniences, type |
|
|
make gforth |
|
|
|
and after this finishes, type |
|
|
|
make |
make |
|
|
We apologize for the inconveniences, we did not invent the 640k limit |
|
that prevents doing make straight forward. You may run out of memory |
|
anyway, because GCC eats up lots of it while compiling engine.c. Keep |
|
enough space free on your harddisk to allow GCC to swap. |
|
|
|
If you want to add some defines like -DFORCE_REG, type |
|
|
|
make gforth XDEFINES=-DFORCE_REG |
|
|
|
instead. |
|
|
|
Now you can check whether your shiny new Forth system works. Say |
Now you can check whether your shiny new Forth system works. Say |
|
|
make test |
make test |