Diff for /gforth/Attic/gforth.ds between versions 1.18 and 1.33

version 1.18, 1995/10/07 17:38:14 version 1.33, 1996/05/13 16:36:56
Line 7 Line 7
 @comment %**end of header (This is for running Texinfo on a region.)  @comment %**end of header (This is for running Texinfo on a region.)
   
 @ifinfo  @ifinfo
 This file documents Gforth 0.1  This file documents Gforth 0.2
   
 Copyright @copyright{} 1994 Gforth Development Group  Copyright @copyright{} 1995,1996 Free Software Foundation, Inc.
   
      Permission is granted to make and distribute verbatim copies of       Permission is granted to make and distribute verbatim copies of
      this manual provided the copyright notice and this permission notice       this manual provided the copyright notice and this permission notice
Line 36  Copyright @copyright{} 1994 Gforth Devel Line 36  Copyright @copyright{} 1994 Gforth Devel
      of in the original English.       of in the original English.
 @end ifinfo  @end ifinfo
   
   @finalout
 @titlepage  @titlepage
 @sp 10  @sp 10
 @center @titlefont{Gforth Manual}  @center @titlefont{Gforth Manual}
 @sp 2  @sp 2
 @center for version 0.1  @center for version 0.2
 @sp 2  @sp 2
 @center Anton Ertl  @center Anton Ertl
   @center Bernd Paysan
 @sp 3  @sp 3
 @center This manual is under construction  @center This manual is under construction
   
 @comment  The following two commands start the copyright page.  @comment  The following two commands start the copyright page.
 @page  @page
 @vskip 0pt plus 1filll  @vskip 0pt plus 1filll
 Copyright @copyright{} 1994 Gforth Development Group  Copyright @copyright{} 1995,1996 Free Software Foundation, Inc.
   
 @comment !! Published by ... or You can get a copy of this manual ...  @comment !! Published by ... or You can get a copy of this manual ...
   
Line 75  Copyright @copyright{} 1994 Gforth Devel Line 77  Copyright @copyright{} 1994 Gforth Devel
 @node Top, License, (dir), (dir)  @node Top, License, (dir), (dir)
 @ifinfo  @ifinfo
 Gforth is a free implementation of ANS Forth available on many  Gforth is a free implementation of ANS Forth available on many
 personal machines. This manual corresponds to version 0.0.  personal machines. This manual corresponds to version 0.2.
 @end ifinfo  @end ifinfo
   
 @menu  @menu
Line 89  personal machines. This manual correspon Line 91  personal machines. This manual correspon
 * Emacs and Gforth::            The Gforth Mode  * Emacs and Gforth::            The Gforth Mode
 * Internals::                   Implementation details  * Internals::                   Implementation details
 * Bugs::                        How to report them  * Bugs::                        How to report them
 * Pedigree::                    Ancestors of Gforth  * Origin::                      Authors and ancestors of Gforth
 * Word Index::                  An item for each Forth word  * Word Index::                  An item for each Forth word
 * Node Index::                  An item for each node  * Node Index::                  An item for each node
 @end menu  @end menu
   
 @node License, Goals, Top, Top  @node License, Goals, Top, Top
 @unnumbered License  @unnumbered GNU GENERAL PUBLIC LICENSE
 !! Insert GPL here  @center Version 2, June 1991
   
   @display
   Copyright @copyright{} 1989, 1991 Free Software Foundation, Inc.
   675 Mass Ave, Cambridge, MA 02139, USA
   
   Everyone is permitted to copy and distribute verbatim copies
   of this license document, but changing it is not allowed.
   @end display
   
   @unnumberedsec Preamble
   
     The licenses for most software are designed to take away your
   freedom to share and change it.  By contrast, the GNU General Public
   License is intended to guarantee your freedom to share and change free
   software---to make sure the software is free for all its users.  This
   General Public License applies to most of the Free Software
   Foundation's software and to any other program whose authors commit to
   using it.  (Some other Free Software Foundation software is covered by
   the GNU Library General Public License instead.)  You can apply it to
   your programs, too.
   
     When we speak of free software, we are referring to freedom, not
   price.  Our General Public Licenses are designed to make sure that you
   have the freedom to distribute copies of free software (and charge for
   this service if you wish), that you receive source code or can get it
   if you want it, that you can change the software or use pieces of it
   in new free programs; and that you know you can do these things.
   
     To protect your rights, we need to make restrictions that forbid
   anyone to deny you these rights or to ask you to surrender the rights.
   These restrictions translate to certain responsibilities for you if you
   distribute copies of the software, or if you modify it.
   
     For example, if you distribute copies of such a program, whether
   gratis or for a fee, you must give the recipients all the rights that
   you have.  You must make sure that they, too, receive or can get the
   source code.  And you must show them these terms so they know their
   rights.
   
     We protect your rights with two steps: (1) copyright the software, and
   (2) offer you this license which gives you legal permission to copy,
   distribute and/or modify the software.
   
     Also, for each author's protection and ours, we want to make certain
   that everyone understands that there is no warranty for this free
   software.  If the software is modified by someone else and passed on, we
   want its recipients to know that what they have is not the original, so
   that any problems introduced by others will not reflect on the original
   authors' reputations.
   
     Finally, any free program is threatened constantly by software
   patents.  We wish to avoid the danger that redistributors of a free
   program will individually obtain patent licenses, in effect making the
   program proprietary.  To prevent this, we have made it clear that any
   patent must be licensed for everyone's free use or not licensed at all.
   
     The precise terms and conditions for copying, distribution and
   modification follow.
   
   @iftex
   @unnumberedsec TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
   @end iftex
   @ifinfo
   @center TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
   @end ifinfo
   
   @enumerate 0
   @item
   This License applies to any program or other work which contains
   a notice placed by the copyright holder saying it may be distributed
   under the terms of this General Public License.  The ``Program'', below,
   refers to any such program or work, and a ``work based on the Program''
   means either the Program or any derivative work under copyright law:
   that is to say, a work containing the Program or a portion of it,
   either verbatim or with modifications and/or translated into another
   language.  (Hereinafter, translation is included without limitation in
   the term ``modification''.)  Each licensee is addressed as ``you''.
   
   Activities other than copying, distribution and modification are not
   covered by this License; they are outside its scope.  The act of
   running the Program is not restricted, and the output from the Program
   is covered only if its contents constitute a work based on the
   Program (independent of having been made by running the Program).
   Whether that is true depends on what the Program does.
   
   @item
   You may copy and distribute verbatim copies of the Program's
   source code as you receive it, in any medium, provided that you
   conspicuously and appropriately publish on each copy an appropriate
   copyright notice and disclaimer of warranty; keep intact all the
   notices that refer to this License and to the absence of any warranty;
   and give any other recipients of the Program a copy of this License
   along with the Program.
   
   You may charge a fee for the physical act of transferring a copy, and
   you may at your option offer warranty protection in exchange for a fee.
   
   @item
   You may modify your copy or copies of the Program or any portion
   of it, thus forming a work based on the Program, and copy and
   distribute such modifications or work under the terms of Section 1
   above, provided that you also meet all of these conditions:
   
   @enumerate a
   @item
   You must cause the modified files to carry prominent notices
   stating that you changed the files and the date of any change.
   
   @item
   You must cause any work that you distribute or publish, that in
   whole or in part contains or is derived from the Program or any
   part thereof, to be licensed as a whole at no charge to all third
   parties under the terms of this License.
   
   @item
   If the modified program normally reads commands interactively
   when run, you must cause it, when started running for such
   interactive use in the most ordinary way, to print or display an
   announcement including an appropriate copyright notice and a
   notice that there is no warranty (or else, saying that you provide
   a warranty) and that users may redistribute the program under
   these conditions, and telling the user how to view a copy of this
   License.  (Exception: if the Program itself is interactive but
   does not normally print such an announcement, your work based on
   the Program is not required to print an announcement.)
   @end enumerate
   
   These requirements apply to the modified work as a whole.  If
   identifiable sections of that work are not derived from the Program,
   and can be reasonably considered independent and separate works in
   themselves, then this License, and its terms, do not apply to those
   sections when you distribute them as separate works.  But when you
   distribute the same sections as part of a whole which is a work based
   on the Program, the distribution of the whole must be on the terms of
   this License, whose permissions for other licensees extend to the
   entire whole, and thus to each and every part regardless of who wrote it.
   
   Thus, it is not the intent of this section to claim rights or contest
   your rights to work written entirely by you; rather, the intent is to
   exercise the right to control the distribution of derivative or
   collective works based on the Program.
   
   In addition, mere aggregation of another work not based on the Program
   with the Program (or with a work based on the Program) on a volume of
   a storage or distribution medium does not bring the other work under
   the scope of this License.
   
   @item
   You may copy and distribute the Program (or a work based on it,
   under Section 2) in object code or executable form under the terms of
   Sections 1 and 2 above provided that you also do one of the following:
   
   @enumerate a
   @item
   Accompany it with the complete corresponding machine-readable
   source code, which must be distributed under the terms of Sections
   1 and 2 above on a medium customarily used for software interchange; or,
   
   @item
   Accompany it with a written offer, valid for at least three
   years, to give any third party, for a charge no more than your
   cost of physically performing source distribution, a complete
   machine-readable copy of the corresponding source code, to be
   distributed under the terms of Sections 1 and 2 above on a medium
   customarily used for software interchange; or,
   
   @item
   Accompany it with the information you received as to the offer
   to distribute corresponding source code.  (This alternative is
   allowed only for noncommercial distribution and only if you
   received the program in object code or executable form with such
   an offer, in accord with Subsection b above.)
   @end enumerate
   
   The source code for a work means the preferred form of the work for
   making modifications to it.  For an executable work, complete source
   code means all the source code for all modules it contains, plus any
   associated interface definition files, plus the scripts used to
   control compilation and installation of the executable.  However, as a
   special exception, the source code distributed need not include
   anything that is normally distributed (in either source or binary
   form) with the major components (compiler, kernel, and so on) of the
   operating system on which the executable runs, unless that component
   itself accompanies the executable.
   
   If distribution of executable or object code is made by offering
   access to copy from a designated place, then offering equivalent
   access to copy the source code from the same place counts as
   distribution of the source code, even though third parties are not
   compelled to copy the source along with the object code.
   
   @item
   You may not copy, modify, sublicense, or distribute the Program
   except as expressly provided under this License.  Any attempt
   otherwise to copy, modify, sublicense or distribute the Program is
   void, and will automatically terminate your rights under this License.
   However, parties who have received copies, or rights, from you under
   this License will not have their licenses terminated so long as such
   parties remain in full compliance.
   
   @item
   You are not required to accept this License, since you have not
   signed it.  However, nothing else grants you permission to modify or
   distribute the Program or its derivative works.  These actions are
   prohibited by law if you do not accept this License.  Therefore, by
   modifying or distributing the Program (or any work based on the
   Program), you indicate your acceptance of this License to do so, and
   all its terms and conditions for copying, distributing or modifying
   the Program or works based on it.
   
   @item
   Each time you redistribute the Program (or any work based on the
   Program), the recipient automatically receives a license from the
   original licensor to copy, distribute or modify the Program subject to
   these terms and conditions.  You may not impose any further
   restrictions on the recipients' exercise of the rights granted herein.
   You are not responsible for enforcing compliance by third parties to
   this License.
   
   @item
   If, as a consequence of a court judgment or allegation of patent
   infringement or for any other reason (not limited to patent issues),
   conditions are imposed on you (whether by court order, agreement or
   otherwise) that contradict the conditions of this License, they do not
   excuse you from the conditions of this License.  If you cannot
   distribute so as to satisfy simultaneously your obligations under this
   License and any other pertinent obligations, then as a consequence you
   may not distribute the Program at all.  For example, if a patent
   license would not permit royalty-free redistribution of the Program by
   all those who receive copies directly or indirectly through you, then
   the only way you could satisfy both it and this License would be to
   refrain entirely from distribution of the Program.
   
   If any portion of this section is held invalid or unenforceable under
   any particular circumstance, the balance of the section is intended to
   apply and the section as a whole is intended to apply in other
   circumstances.
   
   It is not the purpose of this section to induce you to infringe any
   patents or other property right claims or to contest validity of any
   such claims; this section has the sole purpose of protecting the
   integrity of the free software distribution system, which is
   implemented by public license practices.  Many people have made
   generous contributions to the wide range of software distributed
   through that system in reliance on consistent application of that
   system; it is up to the author/donor to decide if he or she is willing
   to distribute software through any other system and a licensee cannot
   impose that choice.
   
   This section is intended to make thoroughly clear what is believed to
   be a consequence of the rest of this License.
   
   @item
   If the distribution and/or use of the Program is restricted in
   certain countries either by patents or by copyrighted interfaces, the
   original copyright holder who places the Program under this License
   may add an explicit geographical distribution limitation excluding
   those countries, so that distribution is permitted only in or among
   countries not thus excluded.  In such case, this License incorporates
   the limitation as if written in the body of this License.
   
   @item
   The Free Software Foundation may publish revised and/or new versions
   of the General Public License from time to time.  Such new versions will
   be similar in spirit to the present version, but may differ in detail to
   address new problems or concerns.
   
   Each version is given a distinguishing version number.  If the Program
   specifies a version number of this License which applies to it and ``any
   later version'', you have the option of following the terms and conditions
   either of that version or of any later version published by the Free
   Software Foundation.  If the Program does not specify a version number of
   this License, you may choose any version ever published by the Free Software
   Foundation.
   
   @item
   If you wish to incorporate parts of the Program into other free
   programs whose distribution conditions are different, write to the author
   to ask for permission.  For software which is copyrighted by the Free
   Software Foundation, write to the Free Software Foundation; we sometimes
   make exceptions for this.  Our decision will be guided by the two goals
   of preserving the free status of all derivatives of our free software and
   of promoting the sharing and reuse of software generally.
   
   @iftex
   @heading NO WARRANTY
   @end iftex
   @ifinfo
   @center NO WARRANTY
   @end ifinfo
   
   @item
   BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
   FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
   OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
   PROVIDE THE PROGRAM ``AS IS'' WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
   OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
   MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
   TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
   PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
   REPAIR OR CORRECTION.
   
   @item
   IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
   WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
   REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
   INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
   OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
   TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
   YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
   PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
   POSSIBILITY OF SUCH DAMAGES.
   @end enumerate
   
 @iftex  @iftex
   @heading END OF TERMS AND CONDITIONS
   @end iftex
   @ifinfo
   @center END OF TERMS AND CONDITIONS
   @end ifinfo
   
   @page
   @unnumberedsec How to Apply These Terms to Your New Programs
   
     If you develop a new program, and you want it to be of the greatest
   possible use to the public, the best way to achieve this is to make it
   free software which everyone can redistribute and change under these terms.
   
     To do so, attach the following notices to the program.  It is safest
   to attach them to the start of each source file to most effectively
   convey the exclusion of warranty; and each file should have at least
   the ``copyright'' line and a pointer to where the full notice is found.
   
   @smallexample
   @var{one line to give the program's name and a brief idea of what it does.}
   Copyright (C) 19@var{yy}  @var{name of author}
   
   This program is free software; you can redistribute it and/or modify 
   it under the terms of the GNU General Public License as published by 
   the Free Software Foundation; either version 2 of the License, or 
   (at your option) any later version.
   
   This program is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.
   
   You should have received a copy of the GNU General Public License
   along with this program; if not, write to the Free Software
   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
   @end smallexample
   
   Also add information on how to contact you by electronic and paper mail.
   
   If the program is interactive, make it output a short notice like this
   when it starts in an interactive mode:
   
   @smallexample
   Gnomovision version 69, Copyright (C) 19@var{yy} @var{name of author}
   Gnomovision comes with ABSOLUTELY NO WARRANTY; for details
   type `show w'.  
   This is free software, and you are welcome to redistribute it 
   under certain conditions; type `show c' for details.
   @end smallexample
   
   The hypothetical commands @samp{show w} and @samp{show c} should show
   the appropriate parts of the General Public License.  Of course, the
   commands you use may be called something other than @samp{show w} and
   @samp{show c}; they could even be mouse-clicks or menu items---whatever
   suits your program.
   
   You should also get your employer (if you work as a programmer) or your
   school, if any, to sign a ``copyright disclaimer'' for the program, if
   necessary.  Here is a sample; alter the names:
   
   @smallexample
   Yoyodyne, Inc., hereby disclaims all copyright interest in the program
   `Gnomovision' (which makes passes at compilers) written by James Hacker.
   
   @var{signature of Ty Coon}, 1 April 1989
   Ty Coon, President of Vice
   @end smallexample
   
   This General Public License does not permit incorporating your program into
   proprietary programs.  If your program is a subroutine library, you may
   consider it more useful to permit linking proprietary applications with the
   library.  If this is what you want to do, use the GNU Library General
   Public License instead of this License.
   
   @iftex
   @node    Preface
   @comment node-name,     next,           previous, up
 @unnumbered Preface  @unnumbered Preface
   @cindex Preface
 This manual documents Gforth. The reader is expected to know  This manual documents Gforth. The reader is expected to know
 Forth. This manual is primarily a reference manual. @xref{Other Books}  Forth. This manual is primarily a reference manual. @xref{Other Books}
 for introductory material.  for introductory material.
Line 157  not written for ANS Forth, as you will n Line 550  not written for ANS Forth, as you will n
 deviations of the book.  deviations of the book.
   
 There is, of course, the standard, the definite reference if you want to  There is, of course, the standard, the definite reference if you want to
 write ANS Forth programs. It will be available in printed form from  write ANS Forth programs. It is available in printed form from the
 Global Engineering Documents !! somtime in spring or summer 1994. If you  National Standards Institute Sales Department (Tel.: USA (212) 642-4900;
 are lucky, you can still get dpANS6 (the draft that was approved as  Fax.: USA (212) 302-1286) as document @cite{X3.215-1994} for about $200. You
 standard) by aftp from ftp.uu.net:/vendor/minerva/x3j14.  can also get it from Global Engineering Documents (Tel.: USA (800)
   854-7179; Fax.: (303) 843-9880) for about $300.
   
   @cite{dpANS6}, the last draft of the standard, which was then submitted to ANSI
   for publication is available electronically and for free in some MS Word
   format, and it has been converted to HTML. Some pointers to these
   versions can be found through
   @*@file{http://www.complang.tuwien.ac.at/projects/forth.html}.
   
 @cite{Forth: The new model} by Jack Woehr (!! Publisher) is an  @cite{Forth: The new model} by Jack Woehr (Prentice-Hall, 1993) is an
 introductory book based on a draft version of the standard. It does not  introductory book based on a draft version of the standard. It does not
 cover the whole standard. It also contains interesting background  cover the whole standard. It also contains interesting background
 information (Jack Woehr was in the ANS Forth Technical Committe). It is  information (Jack Woehr was in the ANS Forth Technical Committe). It is
Line 193  line. They are: Line 593  line. They are:
   
 @table @code  @table @code
 @item --image-file @var{file}  @item --image-file @var{file}
   @item -i @var{file}
 Loads the Forth image @var{file} instead of the default  Loads the Forth image @var{file} instead of the default
 @file{gforth.fi}.  @file{gforth.fi}.
   
 @item --path @var{path}  @item --path @var{path}
   @item -p @var{path}
 Uses @var{path} for searching the image file and Forth source code  Uses @var{path} for searching the image file and Forth source code
 files instead of the default in the environment variable  files instead of the default in the environment variable
 @code{GFORTHPATH} or the path specified at installation time (typically  @code{GFORTHPATH} or the path specified at installation time (typically
Line 245  Forth words, you have to quote them or u Line 647  Forth words, you have to quote them or u
 after processing the command line (instead of entering interactive mode)  after processing the command line (instead of entering interactive mode)
 append @code{-e bye} to the command line.  append @code{-e bye} to the command line.
   
   If you have several versions of Gforth installed, @code{gforth} will
   invoke the version that was installed last. @code{gforth-@var{version}}
   invokes a specific version. You may want to use the option
   @code{--path}, if your environment contains the variable
   @code{GFORTHPATH}.
   
 Not yet implemented:  Not yet implemented:
 On startup the system first executes the system initialization file  On startup the system first executes the system initialization file
 (unless the option @code{--no-init-file} is given; note that the system  (unless the option @code{--no-init-file} is given; note that the system
Line 301  effect}, but in @var{Description}. The n Line 709  effect}, but in @var{Description}. The n
 the type and/or the function of the item. See below for a discussion of  the type and/or the function of the item. See below for a discussion of
 the types.  the types.
   
   All words have two stack effects: A compile-time stack effect and a
   run-time stack effect. The compile-time stack-effect of most words is
   @var{ -- }. If the compile-time stack-effect of a word deviates from
   this standard behaviour, or the word does other unusual things at
   compile time, both stack effects are shown; otherwise only the run-time
   stack effect is shown.
   
 @item pronunciation  @item pronunciation
 How the word is pronounced  How the word is pronounced
   
Line 310  system need not support all of them. So, Line 725  system need not support all of them. So,
 uses the more portable it will be in theory. However, we suspect that  uses the more portable it will be in theory. However, we suspect that
 most ANS Forth systems on personal machines will feature all  most ANS Forth systems on personal machines will feature all
 wordsets. Words that are not defined in the ANS standard have  wordsets. Words that are not defined in the ANS standard have
 @code{gforth} as wordset.  @code{gforth} or @code{gforth-internal} as wordset. @code{gforth}
   describes words that will work in future releases of Gforth;
   @code{gforth-internal} words are more volatile. Environmental query
   strings are also displayed like words; you can recognize them by the
   @code{environment} in the wordset field.
   
 @item Description  @item Description
 A description of the behaviour of the word.  A description of the behaviour of the word.
Line 722  system that only supplies @code{THEN} is Line 1141  system that only supplies @code{THEN} is
 Forth's @code{THEN} has the meaning 2b, whereas @code{THEN} in Pascal  Forth's @code{THEN} has the meaning 2b, whereas @code{THEN} in Pascal
 and many other programming languages has the meaning 3d.]  and many other programming languages has the meaning 3d.]
   
 We also provide the words @code{?dup-if} and @code{?dup-0=-if}, so you  Gforth also provides the words @code{?dup-if} and @code{?dup-0=-if}, so
 can avoid using @code{?dup}.  you can avoid using @code{?dup}. Using these alternatives is also more
   efficient than using @code{?dup}. Definitions in plain standard Forth
   for @code{ENDIF}, @code{?DUP-IF} and @code{?DUP-0=-IF} are provided in
   @file{compat/control.fs}.
   
 @example  @example
 @var{n}  @var{n}
Line 815  arithmetic). This behaviour is usually n Line 1237  arithmetic). This behaviour is usually n
 Gforth offers @code{+DO} and @code{U+DO} (as replacements for  Gforth offers @code{+DO} and @code{U+DO} (as replacements for
 @code{?DO}), which do not enter the loop if @var{start} is greater than  @code{?DO}), which do not enter the loop if @var{start} is greater than
 @var{limit}; @code{+DO} is for signed loop parameters, @code{U+DO} for  @var{limit}; @code{+DO} is for signed loop parameters, @code{U+DO} for
 unsigned loop parameters. These words can be implemented easily on  unsigned loop parameters.
 standard systems, so using them does not make your programs hard to  
 port; e.g.:  
 @example  
 : +DO ( compile-time: -- do-sys; run-time: n1 n2 -- )  
     POSTPONE over POSTPONE min POSTPONE ?DO ; immediate  
 @end example  
   
 @code{LOOP} can be replaced with @code{@var{n} +LOOP}; this updates the  @code{LOOP} can be replaced with @code{@var{n} +LOOP}; this updates the
 index by @var{n} instead of by 1. The loop is terminated when the border  index by @var{n} instead of by 1. The loop is terminated when the border
Line 849  between @var{limit+1} and @var{limit} is Line 1265  between @var{limit+1} and @var{limit} is
   
 @code{ 0 0 -DO  i .  1 -LOOP}  prints nothing  @code{ 0 0 -DO  i .  1 -LOOP}  prints nothing
   
 Another alternative is @code{@var{n} S+LOOP}, where the negative  Unfortunately, @code{+DO}, @code{U+DO}, @code{-DO}, @code{U-DO} and
 case behaves symmetrical to the positive case:  @code{-LOOP} are not in the ANS Forth standard. However, an
   implementation for these words that uses only standard words is provided
 @code{-2 0 -DO  i .  -1 S+LOOP}  prints @code{0 -1}  in @file{compat/loops.fs}.
   
 The loop is terminated when the border between @var{limit@minus{}sgn(n)}  
 and @var{limit} is crossed. Unfortunately, neither @code{-LOOP} nor  
 @code{S+LOOP} are part of the ANS Forth standard, and they are not easy  
 to implement using standard words. If you want to write standard  
 programs, just avoid counting down.  
   
 @code{?DO} can also be replaced by @code{DO}. @code{DO} always enters  @code{?DO} can also be replaced by @code{DO}. @code{DO} always enters
 the loop, independent of the loop parameters. Do not use @code{DO}, even  the loop, independent of the loop parameters. Do not use @code{DO}, even
Line 881  This is the preferred loop of native cod Line 1291  This is the preferred loop of native cod
 lazy to optimize @code{?DO} loops properly. In Gforth, this loop  lazy to optimize @code{?DO} loops properly. In Gforth, this loop
 iterates @var{n+1} times; @code{i} produces values starting with @var{n}  iterates @var{n+1} times; @code{i} produces values starting with @var{n}
 and ending with 0. Other Forth systems may behave differently, even if  and ending with 0. Other Forth systems may behave differently, even if
 they support @code{FOR} loops.  they support @code{FOR} loops. To avoid problems, don't use @code{FOR}
   loops.
   
 @node Arbitrary control structures, Calls and returns, Counted Loops, Control Structures  @node Arbitrary control structures, Calls and returns, Counted Loops, Control Structures
 @subsection Arbitrary control structures  @subsection Arbitrary control structures
Line 917  doc-else Line 1328  doc-else
 doc-while  doc-while
 doc-repeat  doc-repeat
   
   Gforth adds some more control-structure words:
   
   doc-endif
   doc-?dup-if
   doc-?dup-0=-if
   
 Counted loop words constitute a separate group of words:  Counted loop words constitute a separate group of words:
   
 doc-?do  doc-?do
Line 927  doc-u-do Line 1344  doc-u-do
 doc-do  doc-do
 doc-for  doc-for
 doc-loop  doc-loop
 doc-s+loop  
 doc-+loop  doc-+loop
 doc--loop  doc--loop
 doc-next  doc-next
Line 992  while Line 1408  while
 repeat  repeat
 @end example  @end example
   
 That's much easier to read, isn't it? Of course, @code{BEGIN} and  That's much easier to read, isn't it? Of course, @code{REPEAT} and
 @code{WHILE} are predefined, so in this example it would not be  @code{WHILE} are predefined, so in this example it would not be
 necessary to define them.  necessary to define them.
   
Line 1026  laden with restrictions. Therefore, we p Line 1442  laden with restrictions. Therefore, we p
 locals wordset, but also our own, more powerful locals wordset (we  locals wordset, but also our own, more powerful locals wordset (we
 implemented the ANS Forth locals wordset through our locals wordset).  implemented the ANS Forth locals wordset through our locals wordset).
   
   The ideas in this section have also been published in the paper
   @cite{Automatic Scoping of Local Variables} by M. Anton Ertl, presented
   at EuroForth '94; it is available at
   @*@file{http://www.complang.tuwien.ac.at/papers/ertl94l.ps.gz}.
   
 @menu  @menu
 * Gforth locals::                 * Gforth locals::               
 * ANS Forth locals::              * ANS Forth locals::            
Line 1312  E.g., a definition using @code{TO} might Line 1733  E.g., a definition using @code{TO} might
 : strcmp @{ addr1 u1 addr2 u2 -- n @}  : strcmp @{ addr1 u1 addr2 u2 -- n @}
  u1 u2 min 0   u1 u2 min 0
  ?do   ?do
    addr1 c@ addr2 c@ - ?dup     addr1 c@ addr2 c@ -
    if     ?dup-if
      unloop exit       unloop exit
    then     then
    addr1 char+ TO addr1     addr1 char+ TO addr1
Line 1335  are initialized with the right value for Line 1756  are initialized with the right value for
  addr1 addr2   addr1 addr2
  u1 u2 min 0    u1 u2 min 0 
  ?do @{ s1 s2 @}   ?do @{ s1 s2 @}
    s1 c@ s2 c@ - ?dup      s1 c@ s2 c@ -
    if     ?dup-if
      unloop exit       unloop exit
    then     then
    s1 char+ s2 char+     s1 char+ s2 char+
Line 1515  name produces their value. Their value c Line 1936  name produces their value. Their value c
   
 Since this syntax is supported by Gforth directly, you need not do  Since this syntax is supported by Gforth directly, you need not do
 anything to use it. If you want to port a program using this syntax to  anything to use it. If you want to port a program using this syntax to
 another ANS Forth system, use @file{anslocal.fs} to implement the syntax  another ANS Forth system, use @file{compat/anslocal.fs} to implement the
 on the other system.  syntax on the other system.
   
 Note that a syntax shown in the standard, section A.13 looks  Note that a syntax shown in the standard, section A.13 looks
 similar, but is quite different in having the order of locals  similar, but is quite different in having the order of locals
Line 1665  machine code), and for defining the the Line 2086  machine code), and for defining the the
 nature of Gforth poses a few problems: First of all. Gforth runs on  nature of Gforth poses a few problems: First of all. Gforth runs on
 several architectures, so it can provide no standard assembler. What's  several architectures, so it can provide no standard assembler. What's
 worse is that the register allocation not only depends on the processor,  worse is that the register allocation not only depends on the processor,
 but also on the gcc version and options used.  but also on the @code{gcc} version and options used.
   
 The words Gforth offers encapsulate some system dependences (e.g., the  The words that Gforth offers encapsulate some system dependences (e.g., the
 header structure), so a system-independent assembler may be used in  header structure), so a system-independent assembler may be used in
 Gforth. If you do not have an assembler, you can compile machine code  Gforth. If you do not have an assembler, you can compile machine code
 directly with @code{,} and @code{c,}.  directly with @code{,} and @code{c,}.
Line 1683  etc. will not work (reliably), either. Line 2104  etc. will not work (reliably), either.
   
 These words are rarely used. Therefore they reside in @code{code.fs},  These words are rarely used. Therefore they reside in @code{code.fs},
 which is usually not loaded (except @code{flush-icache}, which is always  which is usually not loaded (except @code{flush-icache}, which is always
 present). You can load it with @code{require code.fs}.  present). You can load them with @code{require code.fs}.
   
   In the assembly code you will want to refer to the inner interpreter's
   registers (e.g., the data stack pointer) and you may want to use other
   registers for temporary storage. Unfortunately, the register allocation
   is installation-dependent.
   
   The easiest solution is to use explicit register declarations
   (@pxref{Explicit Reg Vars, , Variables in Specified Registers, gcc.info,
   GNU C Manual}) for all of the inner interpreter's registers: You have to
   compile Gforth with @code{-DFORCE_REG} (configure option
   @code{--enable-force-reg}) and the appropriate declarations must be
   present in the @code{machine.h} file (see @code{mips.h} for an example;
   you can find a full list of all declarable register symbols with
   @code{grep register engine.c}). If you give explicit registers to all
   variables that are declared at the beginning of @code{engine()}, you
   should be able to use the other caller-saved registers for temporary
   storage. Alternatively, you can use the @code{gcc} option
   @code{-ffixed-REG} (@pxref{Code Gen Options, , Options for Code
   Generation Conventions, gcc.info, GNU C Manual}) to reserve a register
   (however, this restriction on register allocation may slow Gforth
   significantly).
   
   If this solution is not viable (e.g., because @code{gcc} does not allow
   you to explicitly declare all the registers you need), you have to find
   out by looking at the code where the inner interpreter's registers
   reside and which registers can be used for temporary storage. You can
   get an assembly listing of the engine's code with @code{make engine.s}.
   
   In any case, it is good practice to abstract your assembly code from the
   actual register allocation. E.g., if the data stack pointer resides in
   register @code{$17}, create an alias for this register called @code{sp},
   and use that in your assembly code.
   
 Another option for implementing normal and defining words efficiently  Another option for implementing normal and defining words efficiently
 is: adding the wanted functionality to the source of Gforth. For normal  is: adding the wanted functionality to the source of Gforth. For normal
 words you just have to edit @file{primitives}, defining words (for fast  words you just have to edit @file{primitives}, defining words (for fast
 defined words) probably require changes in @file{engine.c},  defined words) may require changes in @file{engine.c},
 @file{kernal.fs}, @file{prims2x.fs}, and possibly @file{cross.fs}.  @file{kernal.fs}, @file{prims2x.fs}, and possibly @file{cross.fs}.
   
   
Line 1961  characters is determined by the locale y Line 2414  characters is determined by the locale y
   
 @item division rounding:  @item division rounding:
 installation dependent. @code{s" floored" environment? drop .}. We leave  installation dependent. @code{s" floored" environment? drop .}. We leave
 the choice to gcc (what to use for @code{/}) and to you (whether to use  the choice to @code{gcc} (what to use for @code{/}) and to you (whether to use
 @code{fm/mod}, @code{sm/rem} or simply @code{/}).  @code{fm/mod}, @code{sm/rem} or simply @code{/}).
   
 @item values of @code{STATE} when true:  @item values of @code{STATE} when true:
Line 2072  The next invocation of a parsing word re Line 2525  The next invocation of a parsing word re
 Compiles a recursive call to the defining word not to the defined word.  Compiles a recursive call to the defining word not to the defined word.
   
 @item argument input source different than current input source for @code{RESTORE-INPUT}:  @item argument input source different than current input source for @code{RESTORE-INPUT}:
 !!???If the argument input source is a valid input source then it gets  @code{-12 THROW}. Note that, once an input file is closed (e.g., because
 restored. Otherwise causes @code{-12 THROW} which unless caught issues  the end of the file was reached), its source-id may be
 the message "argument type mismatch" and aborts.  reused. Therefore, restoring an input source specification referencing a
   closed file may lead to unpredictable results instead of a @code{-12
   THROW}.
   
   In the future, Gforth may be able to retore input source specifications
   from other than the current input soruce.
   
 @item data space containing definitions gets de-allocated:  @item data space containing definitions gets de-allocated:
 Deallocation with @code{allot} is not checked. This typically resuls in  Deallocation with @code{allot} is not checked. This typically resuls in
Line 2146  Not checked. As usual, you can expect me Line 2604  Not checked. As usual, you can expect me
 None.  None.
   
 @item operator's terminal facilities available:  @item operator's terminal facilities available:
 !!??  After processing the command line, Gforth goes into interactive mode,
   and you can give commands to Gforth interactively. The actual facilities
   available depend on how you invoke Gforth.
   
 @item program data space available:  @item program data space available:
 @code{sp@ here - .} gives the space remaining for dictionary and data  @code{sp@ here - .} gives the space remaining for dictionary and data
 stack together.  stack together.
   
 @item return stack space available:  @item return stack space available:
 !!??  By default 16 KBytes. The default can be overridden with the @code{-r}
   switch (@pxref{Invocation}) when Gforth starts up.
   
 @item stack space available:  @item stack space available:
 @code{sp@ here - .} gives the space remaining for dictionary and data  @code{sp@ here - .} gives the space remaining for dictionary and data
Line 2474  System dependent; @code{REPRESENT} is im Line 2935  System dependent; @code{REPRESENT} is im
 function @code{ecvt()} and inherits its behaviour in this respect.  function @code{ecvt()} and inherits its behaviour in this respect.
   
 @item rounding or truncation of floating-point numbers:  @item rounding or truncation of floating-point numbers:
 What's the question?!!  System dependent; the rounding behaviour is inherited from the hosting C
   compiler. IEEE-FP-based (i.e., most) systems by default round to
   nearest, and break ties by rounding to even (i.e., such that the last
   bit of the mantissa is 0).
   
 @item size of floating-point stack:  @item size of floating-point stack:
 @code{s" FLOATING-STACK" environment? drop .}. Can be changed at startup  @code{s" FLOATING-STACK" environment? drop .}. Can be changed at startup
Line 2734  Not implemented (yet). Line 3198  Not implemented (yet).
 @table @i  @table @i
   
 @item changing the compilation wordlist (during compilation):  @item changing the compilation wordlist (during compilation):
 The definition is put into the wordlist that is the compilation wordlist  The word is entered into the wordlist that was the compilation wordlist
 when @code{REVEAL} is executed (by @code{;}, @code{DOES>},  at the start of the definition. Any changes to the name field (e.g.,
 @code{RECURSIVE}, etc.).  @code{immediate}) or the code field (e.g., when executing @code{DOES>})
   are applied to the latest defined word (as reported by @code{last} or
   @code{lastxt}), if possible, irrespective of the compilation wordlist.
   
 @item search order empty (@code{previous}):  @item search order empty (@code{previous}):
 @code{abort" Vocstack empty"}.  @code{abort" Vocstack empty"}.
Line 2754  when @code{REVEAL} is executed (by @code Line 3220  when @code{REVEAL} is executed (by @code
 @chapter Emacs and Gforth  @chapter Emacs and Gforth
   
 Gforth comes with @file{gforth.el}, an improved version of  Gforth comes with @file{gforth.el}, an improved version of
 @file{forth.el} by Goran Rydqvist (icluded in the TILE package). The  @file{forth.el} by Goran Rydqvist (included in the TILE package). The
 improvements are a better (but still not perfect) handling of  improvements are a better (but still not perfect) handling of
 indentation. I have also added comment paragraph filling (@kbd{M-q}),  indentation. I have also added comment paragraph filling (@kbd{M-q}),
 commenting (@kbd{C-x \}) and uncommenting (@kbd{C-u C-x \}) regions and  commenting (@kbd{C-x \}) and uncommenting (@kbd{C-u C-x \}) regions and
Line 2776  Also, if you @code{include} @file{etags. Line 3242  Also, if you @code{include} @file{etags.
 contains the definitions of all words defined afterwards. You can then  contains the definitions of all words defined afterwards. You can then
 find the source for a word using @kbd{M-.}. Note that emacs can use  find the source for a word using @kbd{M-.}. Note that emacs can use
 several tags files at the same time (e.g., one for the Gforth sources  several tags files at the same time (e.g., one for the Gforth sources
 and one for your program).  and one for your program, @pxref{Select Tags Table,,Selecting a Tags
   Table,emacs, Emacs Manual}). The TAGS file for the preloaded words is
   @file{$(datadir)/gforth/$(VERSION)/TAGS} (e.g.,
   @file{/usr/local/share/gforth/0.2.0/TAGS}).
   
 To get all these benefits, add the following lines to your @file{.emacs}  To get all these benefits, add the following lines to your @file{.emacs}
 file:  file:
Line 2792  file: Line 3261  file:
 Reading this section is not necessary for programming with Gforth. It  Reading this section is not necessary for programming with Gforth. It
 should be helpful for finding your way in the Gforth sources.  should be helpful for finding your way in the Gforth sources.
   
   The ideas in this section have also been published in the papers
   @cite{ANS fig/GNU/??? Forth} (in German) by Bernd Paysan, presented at
   the Forth-Tagung '93 and @cite{A Portable Forth Engine} by M. Anton
   Ertl, presented at EuroForth '93; the latter is available at
   @*@file{http://www.complang.tuwien.ac.at/papers/ertl93.ps.Z}.
   
 @menu  @menu
 * Portability::                   * Portability::                 
 * Threading::                     * Threading::                   
Line 2825  limitations: GNU C, the version of C pro Line 3300  limitations: GNU C, the version of C pro
 GNU C Manual}). Its labels as values feature (@pxref{Labels as Values, ,  GNU C Manual}). Its labels as values feature (@pxref{Labels as Values, ,
 Labels as Values, gcc.info, GNU C Manual}) makes direct and indirect  Labels as Values, gcc.info, GNU C Manual}) makes direct and indirect
 threading possible, its @code{long long} type (@pxref{Long Long, ,  threading possible, its @code{long long} type (@pxref{Long Long, ,
 Double-Word Integers, gcc.info, GNU C Manual}) corresponds to Forths  Double-Word Integers, gcc.info, GNU C Manual}) corresponds to Forth's
 double numbers. GNU C is available for free on all important (and many  double numbers@footnote{Unfortunately, long longs are not implemented
 unimportant) UNIX machines, VMS, 80386s running MS-DOS, the Amiga, and  properly on all machines (e.g., on alpha-osf1, long longs are only 64
 the Atari ST, so a Forth written in GNU C can run on all these  bits, the same size as longs (and pointers), but they should be twice as
 machines.  long according to @ref{Long Long, , Double-Word Integers, gcc.info, GNU
   C Manual}). So, we had to implement doubles in C after all. Still, on
   most machines we can use long longs and achieve better performance than
   with the emulation package.}. GNU C is available for free on all
   important (and many unimportant) UNIX machines, VMS, 80386s running
   MS-DOS, the Amiga, and the Atari ST, so a Forth written in GNU C can run
   on all these machines.
   
 Writing in a portable language has the reputation of producing code that  Writing in a portable language has the reputation of producing code that
 is slower than assembly. For our Forth engine we repeatedly looked at  is slower than assembly. For our Forth engine we repeatedly looked at
Line 3179  Sieve benchmark on a 486DX2/66 than Gfor Line 3660  Sieve benchmark on a 486DX2/66 than Gfor
   
 However, this potential advantage of assembly language implementations  However, this potential advantage of assembly language implementations
 is not necessarily realized in complete Forth systems: We compared  is not necessarily realized in complete Forth systems: We compared
 Gforth (compiled with @code{gcc-2.6.3} and @code{-DFORCE_REG}) with  Gforth (direct threaded, compiled with @code{gcc-2.6.3} and
 Win32Forth 1.2093 and LMI's NT Forth (Beta, May 1994), two systems  @code{-DFORCE_REG}) with Win32Forth 1.2093, LMI's NT Forth (Beta, May
 written in assembly, and with two systems written in C: PFE-0.9.11  1994) and Eforth (with and without peephole (aka pinhole) optimization
 (compiled with @code{gcc-2.6.3} with the default configuration for  of the threaded code); all these systems were written in assembly
 Linux: @code{-O2 -fomit-frame-pointer -DUSE_REGS}) and ThisForth Beta  language. We also compared Gforth with three systems written in C:
 (compiled with gcc-2.6.3 -O3 -fomit-frame-pointer). We benchmarked  PFE-0.9.14 (compiled with @code{gcc-2.6.3} with the default
 Gforth, PFE and ThisForth on a 486DX2/66 under Linux. Kenneth O'Heskin  configuration for Linux: @code{-O2 -fomit-frame-pointer -DUSE_REGS
 kindly provided the results for Win32Forth and NT Forth on a 486DX2/66  -DUNROLL_NEXT}), ThisForth Beta (compiled with gcc-2.6.3 -O3
 with similar memory performance under Windows NT.  -fomit-frame-pointer; ThisForth employs peephole optimization of the
   threaded code) and TILE (compiled with @code{make opt}). We benchmarked
   Gforth, PFE, ThisForth and TILE on a 486DX2/66 under Linux. Kenneth
   O'Heskin kindly provided the results for Win32Forth and NT Forth on a
   486DX2/66 with similar memory performance under Windows NT. Marcel
   Hendrix ported Eforth to Linux, then extended it to run the benchmarks,
   added the peephole optimizer, ran the benchmarks and reported the
   results.
     
 We used four small benchmarks: the ubiquitous Sieve; bubble-sorting and  We used four small benchmarks: the ubiquitous Sieve; bubble-sorting and
 matrix multiplication come from the Stanford integer benchmarks and have  matrix multiplication come from the Stanford integer benchmarks and have
 been translated into Forth by Martin Fraeman; we used the versions  been translated into Forth by Martin Fraeman; we used the versions
 included in the TILE Forth package; and a recursive Fibonacci number  included in the TILE Forth package, but with bigger data set sizes; and
 computation for benchmark calling performance. The following table shows  a recursive Fibonacci number computation for benchmarking calling
 the time taken for the benchmarks scaled by the time taken by Gforth (in  performance. The following table shows the time taken for the benchmarks
 other words, it shows the speedup factor that Gforth achieved over the  scaled by the time taken by Gforth (in other words, it shows the speedup
 other systems).  factor that Gforth achieved over the other systems).
   
 @example  @example
 relative             Win32-        NT               This-  relative      Win32-    NT       eforth       This-
   time     Gforth     Forth     Forth       PFE     Forth    time  Gforth Forth Forth eforth  +opt   PFE Forth  TILE
 sieve        1.00      1.30      1.07      1.67      2.98  sieve     1.00  1.39  1.14   1.39  0.85  1.58  3.18  8.58
 bubble       1.00      1.30      1.40      1.66  bubble    1.00  1.31  1.41   1.48  0.88  1.50        3.88
 matmul       1.00      1.40      1.29      2.24  matmul    1.00  1.47  1.35   1.46  1.16  1.58        4.09
 fib          1.00      1.44      1.26      1.82      2.82  fib       1.00  1.52  1.34   1.22  1.13  1.74  2.99  4.30
 @end example  @end example
   
 You may find the good performance of Gforth compared with the systems  You may find the good performance of Gforth compared with the systems
Line 3216  method for relocating the Forth image: l Line 3704  method for relocating the Forth image: l
 the actual addresses at run time, resulting in two address computations  the actual addresses at run time, resulting in two address computations
 per NEXT (@pxref{System Architecture}).  per NEXT (@pxref{System Architecture}).
   
 The speedup of Gforth over PFE and ThisForth can be easily explained  Only Eforth with the peephole optimizer performs comparable to
 with the self-imposed restriction to standard C (although the measured  Gforth. The speedups achieved with peephole optimization of threaded
 implementation of PFE uses a GNU C extension: global register  code are quite remarkable. Adding a peephole optimizer to Gforth should
 variables), which makes efficient threading impossible.  Moreover,  cause similar speedups.
 current C compilers have a hard time optimizing other aspects of the  
 ThisForth source.  The speedup of Gforth over PFE, ThisForth and TILE can be easily
   explained with the self-imposed restriction to standard C, which makes
   efficient threading impossible (however, the measured implementation of
   PFE uses a GNU C extension: @ref{Global Reg Vars, , Defining Global
   Register Variables, gcc.info, GNU C Manual}).  Moreover, current C
   compilers have a hard time optimizing other aspects of the ThisForth
   and the TILE source.
   
 Note that the performance of Gforth on 386 architecture processors  Note that the performance of Gforth on 386 architecture processors
 varies widely with the version of @code{gcc} used. E.g., @code{gcc-2.5.8}  varies widely with the version of @code{gcc} used. E.g., @code{gcc-2.5.8}
Line 3230  machine registers by itself and would no Line 3724  machine registers by itself and would no
 register declarations, giving a 1.3 times slower engine (on a 486DX2/66  register declarations, giving a 1.3 times slower engine (on a 486DX2/66
 running the Sieve) than the one measured above.  running the Sieve) than the one measured above.
   
 @node Bugs, Pedigree, Internals, Top  In @cite{Translating Forth to Efficient C} by M. Anton Ertl and Martin
   Maierhofer (presented at EuroForth '95), an indirect threaded version of
   Gforth is compared with Win32Forth, NT Forth, PFE, and ThisForth; that
   version of Gforth is 2\%@minus{}8\% slower on a 486 than the version
   used here. The paper available at
   @*@file{http://www.complang.tuwien.ac.at/papers/ertl&maierhofer95.ps.gz};
   it also contains numbers for some native code systems. You can find
   numbers for Gforth on various machines in @file{Benchres}.
   
   @node Bugs, Origin, Internals, Top
 @chapter Bugs  @chapter Bugs
   
 Known bugs are described in the file BUGS in the Gforth distribution.  Known bugs are described in the file BUGS in the Gforth distribution.
   
 If you find a bug, please send a bug report to !!. A bug report should  If you find a bug, please send a bug report to
   @code{bug-gforth@@gnu.ai.mit.edu}. A bug report should
 describe the Gforth version used (it is announced at the start of an  describe the Gforth version used (it is announced at the start of an
 interactive Gforth session), the machine and operating system (on Unix  interactive Gforth session), the machine and operating system (on Unix
 systems you can use @code{uname -a} to produce this information), the  systems you can use @code{uname -a} to produce this information), the
 installation options (!! a way to find them out), and a complete list of  installation options (send the @code{config.status} file), and a
 changes you (or your installer) have made to the Gforth sources (if  complete list of changes you (or your installer) have made to the Gforth
 any); it should contain a program (or a sequence of keyboard commands)  sources (if any); it should contain a program (or a sequence of keyboard
 that reproduces the bug and a description of what you think constitutes  commands) that reproduces the bug and a description of what you think
 the buggy behaviour.  constitutes the buggy behaviour.
   
 For a thorough guide on reporting bugs read @ref{Bug Reporting, , How  For a thorough guide on reporting bugs read @ref{Bug Reporting, , How
 to Report Bugs, gcc.info, GNU C Manual}.  to Report Bugs, gcc.info, GNU C Manual}.
   
   
 @node Pedigree, Word Index, Bugs, Top  @node Origin, Word Index, Bugs, Top
 @chapter Pedigree  @chapter Authors and Ancestors of Gforth
   
 Gforth descends from BigForth (1993) and fig-Forth. Gforth and PFE (by  @section Authors and Contributors
 Dirk Zoller) will cross-fertilize each other. Of course, a significant part of the design of Gforth was prescribed by ANS Forth.  
   The Gforth project was started in mid-1992 by Bernd Paysan and Anton
   Ertl. The third major author was Jens Wilke.  Lennart Benschop (who was
   one of Gforth's first users, in mid-1993) and Stuart Ramsden inspired us
   with their continuous feedback. Lennart Benshop contributed
   @file{glosgen.fs}, while Stuart Ramsden has been working on automatic
   support for calling C libraries. Helpful comments also came from Paul
   Kleinrubatscher, Christian Pirker, Dirk Zoller and Marcel Hendrix.
   
   Gforth also owes a lot to the authors of the tools we used (GCC, CVS,
   and autoconf, among others), and to the creators of the Internet: Gforth
   was developed across the Internet, and its authors have not met
   physically yet.
   
 Bernd Paysan wrote BigForth, a child of VolksForth.  @section Pedigree
   
   Gforth descends from BigForth (1993) and fig-Forth. Gforth and PFE (by
   Dirk Zoller) will cross-fertilize each other. Of course, a significant
   part of the design of Gforth was prescribed by ANS Forth.
   
 VolksForth descends from F83. !! Authors? When?  Bernd Paysan wrote BigForth, a descendent from TurboForth, an unreleased
   32 bit native code version of VolksForth for the Atari ST, written
   mostly by Dietrich Weineck.
   
   VolksForth descends from F83. It was written by Klaus Schleisiek, Bernd
   Pennemann, Georg Rehfeld and Dietrich Weineck for the C64 (called
   UltraForth there) in the mid-80s and ported to the Atari ST in 1986.
   
 Laxen and Perry wrote F83 as a model implementation of the  Hennry Laxen and Mike Perry wrote F83 as a model implementation of the
 Forth-83 standard. !! Pedigree? When?  Forth-83 standard. !! Pedigree? When?
   
 A team led by Bill Ragsdale implemented fig-Forth on many processors in  A team led by Bill Ragsdale implemented fig-Forth on many processors in
 1979. Dean Sanderson and Bill Ragsdale developed the original  1979. Robert Selzer and Bill Ragsdale developed the original
 implementation of fig-Forth based on microForth.  implementation of fig-Forth for the 6502 based on microForth.
   
 !! microForth pedigree  The principal architect of microForth was Dean Sanderson. microForth was
   FORTH, Inc.'s first off-the-shelf product. It was developped in 1976 for
   the 1802, and subsequently implemented on the 8080, the 6800 and the
   Z80.
   
   All earlier Forth systems were custom-made, usually by Charles Moore,
   who discovered (as he puts it) Forth during the late 60s. The first full
   Forth existed in 1971.
   
 A part of the information in this section comes from @cite{The Evolution  A part of the information in this section comes from @cite{The Evolution
 of Forth} by Elizabeth D. Rather, Donald R. Colburn and Charles  of Forth} by Elizabeth D. Rather, Donald R. Colburn and Charles
Line 3274  H. Moore, presented at the HOPL-II confe Line 3807  H. Moore, presented at the HOPL-II confe
 Notices 28(3), 1993.  You can find more historical and genealogical  Notices 28(3), 1993.  You can find more historical and genealogical
 information about Forth there.  information about Forth there.
   
 @node Word Index, Node Index, Pedigree, Top  @node Word Index, Node Index, Origin, Top
 @chapter Word Index  @chapter Word Index
   
 This index is as incomplete as the manual. Each word is listed with  This index is as incomplete as the manual. Each word is listed with

Removed from v.1.18  
changed lines
  Added in v.1.33


FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>