File:  [gforth] / gforth / Attic / 386.h
Revision 1.14: download - view: text, annotated - select for diffs
Wed Aug 21 14:58:37 1996 UTC (23 years ago) by anton
Branches: MAIN
CVS tags: v0-2-1, v0-2-0, HEAD
a little cleanup in 386.h
renamed special: to interpret/compile:
renamed save-string to save-mem
added extend-mem
replaced (name>) with ((name>))
replaced name> with name>int and name>comp
renamed compile-only to compile-only-error
replaced xt>i with name>int
replaced xt>c with name>comp
removed xt>s
removed found
search-wordlist now delivers interpretation-xt
replaced (sfind) with find-name
replaced C' with COMP' and [C'] with [COMP']
removed S' and [S']
added hex.
added some helper words
adapted other words to the changes
started documenting the intergration of Gforth in applications

/*
  This is the machine-specific part for Intel 386 compatible processors

  Copyright (C) 1995 Free Software Foundation, Inc.

  This file is part of Gforth.

  Gforth is free software; you can redistribute it and/or
  modify it under the terms of the GNU General Public License
  as published by the Free Software Foundation; either version 2
  of the License, or (at your option) any later version.

  This program is distributed in the hope that it will be useful,
  but WITHOUT ANY WARRANTY; without even the implied warranty of
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  GNU General Public License for more details.

  You should have received a copy of the GNU General Public License
  along with this program; if not, write to the Free Software
  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/

#include "32bit.h"

/* indirect threading is faster on the 486, on the 386 direct
   threading is probably faster. Therefore we leave defining
   DIRECT_THREADED to configure */

/* define this if the processor cannot exploit instruction-level
   parallelism (no pipelining or too few registers) */
#define CISC_NEXT

/* 386 and below have no cache, 486 has a shared cache, and the
   Pentium probably employs hardware cache consistency, so
   flush-icache is a noop */
#define FLUSH_ICACHE(addr,size)

#ifdef DIRECT_THREADED

#define CALL 0xe8 /* call */
#define JMP  0xe9 /* jmp  */
#define GETCFA(reg)  ({ asm("popl %0" : "=r" (reg)); (int)reg -= 5;});

/* PFA gives the parameter field address corresponding to a cfa */
#define PFA(cfa)	(((Cell *)cfa)+2)
/* PFA1 is a special version for use just after a NEXT1 */
#define PFA1(cfa)	PFA(cfa)
/* CODE_ADDRESS is the address of the code jumped to through the code field */
#define CODE_ADDRESS(cfa) \
    ({long _cfa = (long)(cfa); (Label)(_cfa+*((long *)(_cfa+1))+5);})
/* MAKE_CF creates an appropriate code field at the cfa; ca is the code address */
#define MAKE_CF(cfa,ca)	({long _cfa = (long)(cfa); \
                          long _ca  = (long)(ca); \
			  *(char *)_cfa = CALL; \
			  *(long *)(_cfa+1) = _ca-(_cfa+5);})

/* this is the point where the does code starts if label points to the
 * jump dodoes */
#define DOES_HANDLER_SIZE       8
#define DOES_CODE(xt) \
({ long _xt = (long)(xt); \
   long _ca = (long)(CODE_ADDRESS(_xt)); \
   ((((*(unsigned char *)_xt) == CALL) \
     && ((*(unsigned char *)_ca) == JMP) \
     && ((long)(CODE_ADDRESS(_ca)) == (long)&&dodoes)) \
    ? _ca+DOES_HANDLER_SIZE : 0L); })

/* this is a special version of DOES_CODE for use in dodoes */
#define DOES_CODE1(label)      (CODE_ADDRESS(label)+DOES_HANDLER_SIZE)

/* this stores a jump dodoes at addr */
#define MAKE_DOES_CF(addr,doesp)	({long _addr = (long)(addr); \
                          long _doesp  = (long)(doesp)-8; \
			  *(char *)_addr = CALL; \
			  *(long *)(_addr+1) = _doesp-(_addr+5);})

#define MAKE_DOES_HANDLER(addr)	({long _addr = (long)(addr); \
                          long _dodo  = (long)symbols[DODOES]; \
			  *(char *)_addr = JMP; \
			  *(long *)(_addr+1) = _dodo-(_addr+5);})
#endif

#ifdef FORCE_REG
#if (__GNUC__==2 && defined(__GNUC_MINOR__) && __GNUC_MINOR__==5)
/* i.e. gcc-2.5.x */
/* this works with 2.5.7; nothing works with 2.5.8 */
#define IPREG asm("%esi")
#define SPREG asm("%edi")
#ifdef USE_TOS
#define CFAREG asm("%ecx")
#else
#define CFAREG asm("%edx")
#endif
#else /* gcc-version */
/* this works with 2.6.3 (and quite well, too) */
/* since this is not very demanding, it's the default for other gcc versions */
#if defined(USE_TOS) && !defined(CFA_NEXT)
#define IPREG asm("%ebx")
#else
#define SPREG asm("%ebx")
#endif /* USE_TOS && !CFA_NEXT */
#endif /* gcc-version */
#endif /* FORCE_REG */

FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>